Displaying publications 1 - 20 of 451 in total

Abstract:
Sort:
  1. Bernhardt J, Raffelt A, Churilov L, Lindley RI, Speare S, Ancliffe J, et al.
    BMJ Open, 2015 Aug 17;5(8):e008378.
    PMID: 26283667 DOI: 10.1136/bmjopen-2015-008378
    OBJECTIVE: The purpose of this paper is to examine potential threats to generalisability of the results of a multicentre randomised controlled trial using data from A Very Early Rehabilitation Trial (AVERT).

    DESIGN: AVERT is a prospective, parallel group, assessor-blinded randomised clinical trial. This paper presents data assessing the generalisability of AVERT.

    SETTING: Acute stroke units at 44 hospitals in 8 countries.

    PARTICIPANTS: The first 20,000 patients screened for AVERT, of whom 1158 were recruited and randomised.

    MODEL: We use the Proximal Similarity Model, which considers the person, place, and setting and practice, as a framework for considering generalisability. As well as comparing the recruited patients with the target population, we also performed an exploratory analysis of the demographic, clinical, site and process factors associated with recruitment.

    RESULTS: The demographics and stroke characteristics of the included patients in the trial were broadly similar to population-based norms, with the exception that AVERT had a greater proportion of men. The most common reason for non-recruitment was late arrival to hospital (ie, >24 h). Overall, being older and female reduced the odds of recruitment to the trial. More women than men were excluded for most of the reasons, including refusal. The odds of exclusion due to early deterioration were particularly high for those with severe stroke (OR=10.4, p<0.001, 95% CI 9.27 to 11.65).

    CONCLUSIONS: A model which explores person, place, and setting and practice factors can provide important information about the external validity of a trial, and could be applied to other clinical trials.

    TRIAL REGISTRATION NUMBER: Australian New Zealand Clinical Trials Registry (ACTRN12606000185561) and Clinicaltrials.gov (NCT01846247).

    Matched MeSH terms: Research Design
  2. Khoo LW, Audrey Kow S, Lee MT, Tan CP, Shaari K, Tham CL, et al.
    PMID: 30105077 DOI: 10.1155/2018/9276260
    Clinacanthus nutans (Burm.f.) Lindau (Acanthaceae), commonly known as Sabah snake grass, is a vegetable and a well-known herb that is considered an alternative medicine for insect bites, skin rashes, herpes infection, inflammation, and cancer and for health benefits. Current review aims to provide a well-tabulated repository of the phytochemical screening, identification and quantification, and the pharmacological information of C. nutans according to the experimental design and the plant preparation methods which make it outstanding compared to existing reviews. This review has documented valuable data obtained from all accessible library databases and electronic searches. For the first time we analyzed the presence of flavonoids, triterpenoids, steroids, phytosterols, and glycosides in C. nutans based on the results from phytochemical screening which are then further confirmed by conventional phytochemical isolation methods and advanced spectroscopic techniques. Phytochemical quantification further illustrated that C. nutans is a good source of phenolics and flavonoids. Pharmacological studies on C. nutans revealed that its polar extract could be a promising anti-inflammation, antiviral, anticancer, immune and neuromodulating, and plasmid DNA protective agent; that its semipolar extract could be a promising antiviral, anticancer, and wound healing agent; and that its nonpolar extract could be an excellent anticancer agent.
    Matched MeSH terms: Research Design
  3. Amarneh S, Raza A, Matloob S, Alharbi RK, Abbasi MA
    Nurs Res Pract, 2021;2021:6688603.
    PMID: 33815841 DOI: 10.1155/2021/6688603
    There is an acute shortage of nurses worldwide, including in Jordan. The nursing shortage is considered to be a crucial and complex challenge across healthcare systems and has stretched to a warning threshold. High turnover among nurses in Jordan is an enduring problem and is believed to be the foremost cause of the nurse shortage. The purpose of this study was to investigate the multidimensional impact of the person-environment (P-E) fit on the job satisfaction (JS) and turnover intention (TI) of registered nurses. The moderating effect of psychological empowerment (PE) on the relationship between JS and TI was also investigated. Based on a quantitative research design, data were collected purposively from 383 registered nurses working at private Jordanian hospitals through self-administered structured questionnaires. Statistical Package for Social Sciences (SPSS) 25 and Smart Partial Least Squares (PLS) 3.2.8 were used to analyze the statistical data. The results showed that there is a significant relationship between person-job fit (P-J fit), person-supervisor fit (P-S fit), and JS. However, this study found an insignificant relationship between person-organization fit (P-O fit) and JS. Moreover, PE was also significantly moderate between JS and TI of nurses. This study offers an important policy intervention that helps healthcare organizations to understand the enduring issue of nurse turnover. Additionally, policy recommendations to mitigate nurse turnover in Jordan are outlined.
    Matched MeSH terms: Research Design
  4. Abusafia AH, Khraisat AMS, Tableb OK, Al-Mugheed K, Alabdullah AA, Abdelaliem SMF
    BMC Palliat Care, 2024 Jan 22;23(1):21.
    PMID: 38246991 DOI: 10.1186/s12904-024-01356-z
    PURPOSE: This study aimed to assess the impact of the Nursing Spiritual Care Module on the competence of nurses in providing spiritual care in the context of Malaysia.

    METHOD: This study employed an experimental design and involved a total of 122 nurses, with 59 in the experimental group and 63 in the control group. Participants were selected from palliative care wards associated with Hospital Universiti Sains Malaysia. Nurses in the experimental group underwent a two-week educational module on nursing spiritual care, while nurses in the control group attended a single lecture on spiritual care provided by the hospital.

    RESULTS: The results indicated no significant differences in sociodemographic characteristics between the two groups. A significant difference in spiritual care competence within the intervention group and the control group over time (p-value = 0.001), between the two groups (p-value = 0.038), and in the interaction between time and group (p-value = 0.001).

    CONCLUSION: The Nursing Spiritual Care Module is crucial in aiding nurses and healthcare professionals in cultivating the appropriate and wholesome attitudes and practices necessary to address the spiritual needs of patients.

    Matched MeSH terms: Research Design*
  5. Ahmed A, Saeed F, Salim N, Abdo A
    J Cheminform, 2014;6:19.
    PMID: 24883114 DOI: 10.1186/1758-2946-6-19
    BACKGROUND: It is known that any individual similarity measure will not always give the best recall of active molecule structure for all types of activity classes. Recently, the effectiveness of ligand-based virtual screening approaches can be enhanced by using data fusion. Data fusion can be implemented using two different approaches: group fusion and similarity fusion. Similarity fusion involves searching using multiple similarity measures. The similarity scores, or ranking, for each similarity measure are combined to obtain the final ranking of the compounds in the database.

    RESULTS: The Condorcet fusion method was examined. This approach combines the outputs of similarity searches from eleven association and distance similarity coefficients, and then the winner measure for each class of molecules, based on Condorcet fusion, was chosen to be the best method of searching. The recall of retrieved active molecules at top 5% and significant test are used to evaluate our proposed method. The MDL drug data report (MDDR), maximum unbiased validation (MUV) and Directory of Useful Decoys (DUD) data sets were used for experiments and were represented by 2D fingerprints.

    CONCLUSIONS: Simulated virtual screening experiments with the standard two data sets show that the use of Condorcet fusion provides a very simple way of improving the ligand-based virtual screening, especially when the active molecules being sought have a lowest degree of structural heterogeneity. However, the effectiveness of the Condorcet fusion was increased slightly when structural sets of high diversity activities were being sought.

    Matched MeSH terms: Research Design
  6. Abdul Kader H
    Malays J Reprod Health, 1983 Dec;1(2):139-52.
    PMID: 12313335
    Matched MeSH terms: Research Design
  7. Ngan CL, Basri M, Lye FF, Fard Masoumi HR, Tripathy M, Karjiban RA, et al.
    Int J Nanomedicine, 2014;9:4375-86.
    PMID: 25258528 DOI: 10.2147/IJN.S65689
    This research aims to formulate and to optimize a nanoemulsion-based formulation containing fullerene, an antioxidant, stabilized by a low amount of mixed surfactants using high shear and the ultrasonic emulsification method for transdermal delivery. Process parameters optimization of fullerene nanoemulsions was done by employing response surface methodology, which involved statistical multivariate analysis. Optimization of independent variables was investigated using experimental design based on Box-Behnken design and central composite rotatable design. An investigation on the effect of the homogenization rate (4,000-5,000 rpm), sonication amplitude (20%-60%), and sonication time (30-150 seconds) on the particle size, ζ-potential, and viscosity of the colloidal systems was conducted. Under the optimum conditions, the central composite rotatable design model suggested the response variables for particle size, ζ-potential, and viscosity of the fullerene nanoemulsion were 152.5 nm, -52.6 mV, and 44.6 pascal seconds, respectively. In contrast, the Box-Behnken design model proposed that preparation under the optimum condition would produce nanoemulsion with particle size, ζ-potential, and viscosity of 148.5 nm, -55.2 mV, and 39.9 pascal seconds, respectively. The suggested process parameters to obtain optimum formulation by both models yielded actual response values similar to the predicted values with residual standard error of <2%. The optimum formulation showed more elastic and solid-like characteristics due to the existence of a large linear viscoelastic region.
    Matched MeSH terms: Research Design
  8. Chang KH, Yew CH, Abdullah AF
    J Forensic Sci, 2014 Jul;59(4):1100-8.
    PMID: 24611488 DOI: 10.1111/1556-4029.12440
    Smokeless powders are low explosives and are potentially found in cases involving firearms and improvised explosive devices. Apart from inorganic compound analysis, forensic determination of organic components of these materials appears as a promising alternative, especially the chromatographic techniques. This work describes the optimization of a solid-phase microextraction technique using an 85 μm polyacrylate fiber followed by gas chromatography-flame ionization detection for smokeless powder. A multivariate experimental design was performed to optimize extraction-influencing parameters. A 2(4) factorial first-order design revealed that sample temperature and extraction time were the major influencing parameters. Doehlert matrix design has subsequently selected 66°C and 21 min as the compromised conditions for the two predetermined parameters. This extraction technique has successfully detected the headspace compounds of smokeless powders from different ammunition types and allowed for their differentiation. The novel technique allows more rapid sample preparation for chromatographic detection of smokeless powders.
    Matched MeSH terms: Research Design
  9. Chong BW, Othman R, Putra Jaya R, Mohd Hasan MR, Sandu AV, Nabiałek M, et al.
    Materials (Basel), 2021 Apr 09;14(8).
    PMID: 33918757 DOI: 10.3390/ma14081866
    Concrete mix design and the determination of concrete performance are not merely engineering studies, but also mathematical and statistical endeavors. The study of concrete mechanical properties involves a myriad of factors, including, but not limited to, the amount of each constituent material and its proportion, the type and dosage of chemical additives, and the inclusion of different waste materials. The number of factors and combinations make it difficult, or outright impossible, to formulate an expression of concrete performance through sheer experimentation. Hence, design of experiment has become a part of studies, involving concrete with material addition or replacement. This paper reviewed common design of experimental methods, implemented by past studies, which looked into the analysis of concrete performance. Several analysis methods were employed to optimize data collection and data analysis, such as analysis of variance (ANOVA), regression, Taguchi method, Response Surface Methodology, and Artificial Neural Network. It can be concluded that the use of statistical analysis is helpful for concrete material research, and all the reviewed designs of experimental methods are helpful in simplifying the work and saving time, while providing accurate prediction of concrete mechanical performance.
    Matched MeSH terms: Research Design
  10. Khadijah, O., Lee, K.K., Abdullah, M.F.F.
    ASM Science Journal, 2010;4(2):103-112.
    MyJurnal
    Two sequential statistical experimental designs were used to screen and investigate the dependence of the amount of biodegradation of Procion Red MX-8B (PR-MX8B) on the fermentation variables. Fourteen factors were screened using the Plackett-Burman design. Among these factors, the most significant variables which included yeast extract, corn steep solids and starch influencing PR-MX8B decolourisation were statistically elucidated for optimization. The optimum concentrations of 5.00 g/l yeast extract, 2.99 g/l starch and 1.89 g/l corn steep solids were predicted by applying the Box-Behnken design to the second order polynomial model fitted to the results obtained. The best predicted optimal conditions verified experimentally yielded 72.11% while the predicted value from the polynomial model was 79.17%. The experimental values were in good agreement with the predicted values with a 90.81% degree of accuracy.
    Matched MeSH terms: Research Design
  11. Sukhbeer KaurDarsin Singh, Khatijah Lim Abdullah3, Imran Zainal Abidin, Abqariyah Yahya
    MyJurnal
    Introduction: Cardiac rehabilitation is one of the secondary prevention programme to reduce morbidity and mortal- ity in cardiac patients. However, adherence towards this programme is still sub optimal. The objective of this study isto determine the perceived barriers on cardiac rehabilitation programme among cardiac patients and its association with the sociodemographiccharacteristics. Methods: A preliminary study using the Cardiac Rehabilitation Barrier Scale (CRBS) was conducted in a tertiary hospital among 40 patients. The CRBS tool was validated and tested for reliability.Convenience sampling method was used among those who have attended the cardiac rehabilitation pro- gramme. Ethical approval was obtained from the institution ethical committee. There were total of 22 items in the CRBS except for the last item (22nd) being an open-ended item to enable the patients to share their opinion on any other barriers towards attendance to cardiac rehabilitation programme. The 21 items assessed on patients’ opinion on the perceived barriers during their attendance to the cardiac rehabilitation programme in a form of Likert scale. Results: The overall mean (SD) score for the 21 items was 60.70 (8.77) showed that the patients were able to un- derstand gave their best options on the opinions towards CRBS. The highest mean on item 11 on ‘time constraints’ at 3.58 (0.75). Thus, the majority of the patients scored the item “time constraints’ as the highest perceived barrier during attendance in the cardiac rehabilitation programme. The association of the sociodemographic status had sig- nificance difference (p
    Matched MeSH terms: Research Design
  12. Abrams S
    PMID: 12294443
    Matched MeSH terms: Research Design
  13. Abu Maloh HIA, Soh KL, Chong SC, Ismail SIF, Soh KG, Abu Maloh DI, et al.
    Clin Nurs Res, 2023 Feb;32(2):288-297.
    PMID: 35915917 DOI: 10.1177/10547738221112759
    Benson's relaxation affects many symptoms among hemodialysis patients. A cluster-randomized active control clinical trial with three repeated measures; pre, 1-week, and 1-month post-intervention sought to evaluate the effectiveness of Benson's Relaxation on pain and perceived stress (P&PS) among hemodialysis patients. Two governmental hospitals were randomly assigned to intervention and control. Thirty-six participants were randomly selected; 18 were intervention, and 18 were controlled. The intervention group performed Benson's Relaxation twice a day for 10 minutes for 8 weeks after a training session. The control group received an educational session about Progressive Relaxation. Findings revealed a statistically significant reduction in the PSS-10 and PRI scores between pre-intervention and 1 month after-intervention (p  .05). Benson's Relaxation significantly relieved P&PS among hemodialysis patients but not after only 1 week of practicing.
    Matched MeSH terms: Research Design
  14. Hassan N, Ahmad T, Ashaari A, Awang SR, Mamat SS, Wan Mohamad WM, et al.
    Results Phys, 2021 Jun;25:104267.
    PMID: 33968605 DOI: 10.1016/j.rinp.2021.104267
    Complex systems require rigorous analysis using effective method, in order to handle and interpret their information. Spectrum produced from Fourier transform infrared (FTIR) instrument is an example of a complex system, due to their overlapped bands and interactions within the spectrum. Thus, chemometrics techniques are required to further analyze the data, in particular, chemometrics fuzzy autocatalytic set (c-FACS). The c-FACS is initially used to analyze the FTIR spectra of gelatins. However, in this study, the c-FACS is generalized and implemented for analysis of Coronavirus disease 2019 (Covid-19), particularly, the pandemic outbreak in Malaysia. The daily Covid-19 cases in states in Malaysia are modeled and analyzed using c-FACS, to observe the trend and severity of the disease in Malaysia. As a result, the classification of severity of zones in Malaysia are identified. The obtained results offer descriptive insight for strategizing purposes in combating the Covid-19 outbreak in Malaysia.
    Matched MeSH terms: Research Design
  15. Ahmad P, Vincent Abbott P, Khursheed Alam M, Ahmed Asif J
    Dent Traumatol, 2020 Apr;36(2):89-99.
    PMID: 31800153 DOI: 10.1111/edt.12534
    BACKGROUND/AIMS: The impact of a scientific article in its respective field is reflected by its citation count. The purpose of this review was to conduct a citation analysis in order to identify and analyze the top 50 most cited articles published in Dental Traumatology since its inception in order to highlight the contribution of the journal to the field of Dental Traumatology.

    METHODS: Elsevier's Scopus was used to search and analyze the 50 most frequently cited scientific papers. After the screening process, two reviewers arranged the articles in a descending order based on their citation counts. Each article was then cross-matched with Google Scholar. The articles were analyzed, and information including citation counts, citation density, publication year, authorship, contributing institutions and countries, article topic, study design, and keywords was extracted.

    RESULTS: The literature search identified 2421 articles. The citation counts of the 50 selected articles varied from 117 to 580 (Scopus) and 206 to 1130 (Google Scholar). The year in which most top 50 articles were published was 2002 (n = 5). Among 105 authors, the greatest contribution was made by JO Andreasen (n = 12). Most of the articles originated from the United States (n = 12) with the greatest contributions from the University Hospital (Rigshospitalet), Copenhagen, Denmark (n = 6). Original research article was the most frequent study design (n = 34). The majority of the top 50 articles were focused on traumatic dental injuries. Among 131 unique key words, root resorption (n = 6) was the most frequently used. A non-significant correlation occurred between citation count (correlation coefficient = 0.127, P = .378), citation density (correlation coefficient = 0.654, P = 2.493), and publication age.

    CONCLUSIONS: This study identified the top 50 most cited articles published in this journal in the specialty of Dental Traumatology. The publication year of an article was not significantly associated with citation count nor citation density.

    Matched MeSH terms: Research Design
  16. Fidelia Ferderik Anis, Mazlinda Musa, Aini Ahmad
    MyJurnal
    Introduction:Simulation training in airway management among nursing students was recommended to enhance skills, knowledge and confidence during their clinical attachment in the Emergency Department but the efficacy was not being explored adequately. The objective of this study was to determine the efficacy of simulation training in airway management among final year nursing student Kota Kinabalu Training Institute (KKTI). Methods: This was quasi-experimental research design, which the participant was divided into test and control group without random-ization. A sample of forty final year nursing students was selected for this study. This was a comparative study in-volving twenty KKTI final year nursing students (test group) with simulation versus twenty final year nursing students (control group) without simulation on airway before and after posted to Emergency and Trauma Department (ETD). Two instruments were used, i) Pretest/posttest survey design by Porter et al (2013), and; ii) The Simulation Efficacy Tool-Modified (SET-M). SPSS version 24 Independent T test was used to analyse the mean score between the groups. Results: Levene’s test for equality of variance shown significant (t= -.005, df = 38, p
    Matched MeSH terms: Research Design
  17. Ghouri AM, Kin TM, Yunus NKBY, Akhtar P
    Data Brief, 2019 Aug;25:104131.
    PMID: 31440536 DOI: 10.1016/j.dib.2019.104131
    This study intended to validate customer inspiration (CI)in Malaysian/developing country context. Data were collected from two different respondents for two studies - from Millennial customers of the auto industry and Generation Z customers of the smartphone industry. The survey conducted through a standardized and structured questionnaire. The variables of the both studies were customer-defined market orientation (MO) (customer orientation, competitor orientation, and interfunctional coordination), CI (inspired-by and inspired-to), and customer loyalty (CL). This research strategy, in terms of quantity, is descriptive and correlational. Statistical analysis of the data was carried out, using ADANCO 2.0. The finding of the study suggests all results of data 1 and data 2 were significant, and CI mediates the sub-constructs of MO with CL.
    Matched MeSH terms: Research Design
  18. Widiastuti T, Prasetyo A, Robani A, Mawardi I, Rosida R, Al Mustofa MU
    PLoS One, 2022;17(11):e0276876.
    PMID: 36413519 DOI: 10.1371/journal.pone.0276876
    Several previous studies state that the Islamic Social Finance program has not fully succeeded in creating prosperity, and there are no definite measurements to show the sustainability impact of the program. Thus, a measurement is needed to analyze various aspects in achieving the success and sustainability of Islamic social finance programs. This study developed an index for performance evaluation with an emphasis on the success and sustainability of the Islamic Social Finance program. The study used the Analytical Network Process to determine and analyze priority components. Furthermore, the Multistage Weighted Index method was used to calculate the final index score. The index was built by taking into consideration various factors, stakeholders, aspects, and indicators. This study indicates that aspects of funding contribution from donors (0.22), involvement of donors in giving advice (0.99), and controlling of supervisor (0.08) are priority aspects in the success and sustainability of the program. An empirical investigation was performed on three different programs in Indonesia: A, B, and C. Program A (0.81) and C (0.80) have succeeded in improving the beneficiaries' quality of life to the level of economic resilience, although at a low level of sustainability (76-84.33). On the other hand, program B (0.73) is at the economic reinforcement and has not yet achieved sustainability. This index can be seen as a comprehensive tool for measuring the success and sustainability of the program at several levels.
    Matched MeSH terms: Research Design*
  19. Abdulelah H, Negash BM, Yekeen N, Al-Hajri S, Padmanabhan E, Al-Yaseri A
    ACS Omega, 2020 Aug 18;5(32):20107-20121.
    PMID: 32832765 DOI: 10.1021/acsomega.0c01738
    The influence of an anionic surfactant, a cationic surfactant, and salinity on adsorbed methane (CH4) in shale was assessed and modeled in a series of systematically designed experiments. Two cases were investigated. In case 1, the crushed Marcellus shale samples were allowed to react with anionic sodium dodecyl sulfate (SDS) and brine. In case 2, another set of crushed Marcellus shale samples were treated with cetyltrimethylammonium bromide (CTAB) and brine. The surfactant concentration and salinity of brine were varied following the Box-Behnken experimental design. CH4 adsorption was then assessed volumetrically in the treated shale at varying pressures (1-50 bar) and a constant temperature of 30 °C using a pressure equilibrium cell. Mathematical analysis of the experimental data yielded two separate models, which expressed the amount of adsorbed CH4 as a function of SDS/CTAB concentration, salinity, and pressure. In case 1, the highest amount of adsorbed CH4 was about 1 mmol/g. Such an amount was achieved at 50 bar, provided that the SDS concentration is kept close to its critical micelle concentration (CMC), which is 0.2 wt %, and salinity is in the range of 0.1-20 ppt. However, in case 2, the maximum amount of adsorbed CH4 was just 0.3 mmol/g. This value was obtained at 50 bar and high salinity (∼75 ppt) when the CTAB concentration was above the CMC (>0.029 wt %). The findings provide researchers with insights that can help in optimizing the ratio of salinity and surfactant concentration used in shale gas fracturing fluid.
    Matched MeSH terms: Research Design
  20. Fadil F, Adli FA, Affandi NDN, Harun AM, Alam MK
    Polymers (Basel), 2020 Dec 18;12(12).
    PMID: 33353189 DOI: 10.3390/polym12123043
    The lack of aesthetic properties of electrospun nanofibres in terms of colour appearance is the drive in this preliminary study. This research is conducted to study the dyeing behaviour and colorimetric properties of electrospun nanofibres blended with Remazol Yellow FG reactive dye using dope-dyeing method via electrospinning process. This paper reports the colorimetric properties of dyed poly vinyl alcohol (PVA) nanofibres within the range of 2.5 wt.% to 12.5 wt.% dye content. The electrospinning parameters were fixed at the electrospinning distance of 10 cm, constant feed rate of 0.5 mL/h and applied voltage of 15 kV. The resulting impregnated dye of 10 wt.% exhibits acceptable colour difference of dyed PVA nanofibres, with a mean fibre diameter of 177.1 ± 11.5 nm. The SEM micrographs show the effect of dye content on morphology and fibre diameter upon the increment of dye used. Further increase of dye content adversely affects the jet stability during the electrospinning, resulting in macroscopic dropping phenomenon. The presence of all prominent peaks of Remazol dye in the PVA nanofibers was supported with FTIR analysis. The addition of dye into the nanofibres has resulted in the enhancement of thermal stability of the PVA as demonstrated by TGA analysis.
    Matched MeSH terms: Research Design
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links