Displaying publications 1 - 20 of 198 in total

Abstract:
Sort:
  1. Ab Lah R, Kelaher BP, Bucher D, Benkendorff K
    Mar Environ Res, 2018 Oct;141:100-108.
    PMID: 30119918 DOI: 10.1016/j.marenvres.2018.08.009
    Rising levels of atmospheric carbon dioxide are driving ocean warming and acidification. This could cause stress resulting in decreases in nutritional quality of marine species for human consumption, if environmental changes go beyond the optimal range for harvested species. To evaluate this, we used ambient and near-future elevated temperatures and pCO2 to assess impacts on the proximate nutritional composition (moisture, ash, protein, and lipids), fatty acids and trace elements of the foot tissue of Turbo militaris, a commercially harvested marine snail from south-eastern Australia. In a fully orthogonal design, the snails were exposed to ambient seawater conditions (22 ± 0.2 °C, pH 8.13 ± 0.01-450 μatm pCO2), ocean warming (25 ± 0.05 °C), pCO2 ocean acidification (pH 7.85 ± 0.02, ∼880 μatm pCO2) or a combination of both in controlled flow-through seawater mesocosms for 38 days. Moisture, ash, protein and total lipid content of the foot tissue in the turban snails was unaffected by ocean warming or acidification. However, ocean warming caused a reduction in healthful polyunsaturated fatty acids (PUFA) relative to saturated fatty acids (SFA). Under future warming and acidification conditions, there was a significant 3-5% decrease in n-3 fatty acids, which contributed to a decrease in the n-3/n-6 fatty acid ratio. The decrease in n-3 PUFAs, particularly Eicopentanoic acid (EPA), is a major negative outcome from ocean warming, because higher n-3/n-6 ratios in seafood are desirable for human health. Furthermore, ocean warming was found to increase levels of zinc in the tissues. Calcium, iron, macroelements, microelements and the composition of toxic elements did not appear to be affected by ocean climate change. Overall, the major impact from ocean climate change on seafood quality is likely to be a decrease in healthy polyunsaturated fatty acids at higher temperatures.
    Matched MeSH terms: Seawater*
  2. Abdul-Hadi A, Mansor S, Pradhan B, Tan CK
    Environ Monit Assess, 2013 May;185(5):3977-91.
    PMID: 22930185 DOI: 10.1007/s10661-012-2843-2
    A study was conducted to investigate the influence of Asian monsoon on chlorophyll-a (Chl-a) content in Sabah waters and to identify the related oceanographic conditions that caused phytoplankton blooms at the eastern and western coasts of Sabah, Malaysia. A series of remote sensing measurements including surface Chl-a, sea surface temperature, sea surface height anomaly, wind speed, wind stress curl, and Ekman pumping were analyzed to study the oceanographic conditions that lead to large-scale nutrients enrichment in the surface layer. The results showed that the Chl-a content increased at the northwest coast from December to April due to strong northeasterly wind and coastal upwelling in Kota Kinabalu water. The southwest coast (Labuan water) maintained high concentrations throughout the year due to the effect of Padas River discharge during the rainy season and the changing direction of Baram River plume during the northeast monsoon (NEM). However, with the continuous supply of nutrients from the upwelling area, the high Chl-a batches were maintained at the offshore water off Labuan for a longer time during NEM. On the other side, the northeast coast illustrated a high Chl-a in Sandakan water during NEM, whereas the northern tip off Kudat did not show a pronounced change throughout the year. The southeast coast (Tawau water) was highly influenced by the direction of the surface water transport between the Sulu and Sulawesi Seas and the prevailing surface currents. The study demonstrates the presence of seasonal phytoplankton blooms in Sabah waters which will aid in forecasting the possible biological response and could further assist in marine resource managements.
    Matched MeSH terms: Seawater/chemistry*
  3. Abdulbari HA, Basheer EAM
    Sci Rep, 2019 08 29;9(1):12576.
    PMID: 31467344 DOI: 10.1038/s41598-019-49071-7
    Directional solvent extraction is one of the promising membrane-less seawater desalination method. This technique was not extensively investigated due the poor mixing and separation performances of its bench-scale system. It is believed that, overcoming these drawbacks is possible now with the rapid development of microfluidics technology that enabled high-precession micro mixing and separation. This work presents microfluidics chip for extracting and separating salt from seawater. The chip was designed with two sections for extraction and separation. In both sections, the liquids were separated using capillary channels perpendicular to the main stream. The main channels were designed to be 400 µm in width and 100 µm in height. Two streams inlets were introduced through a Y-junction containing octanoic acid as the organic phase and saltwater as the aqueous phase. The desalination performance was investigated at four different temperatures and five different solvent flow rates. Water product salinity was recorded to be as low as 0.056% (w/w) at 60 °C and 40 mL/h. A maximum water yield of 5.2% was achieved at 65 °C and 40 mL/h with a very low solvent residual (70 ppm). The chip mass transfer efficiency was recorded to be as high as 68% under similar conditions. The fabricated microfluidic desalination system showed a significant improvement in terms of water yield and separation efficiency over the conventional macroscale. The high performance of this microsystem resulted from its ability to achieve a high mixing efficiency and separate phases selectively and that will provide a good platform in the near future to develop small desalination kits for personal use.
    Matched MeSH terms: Seawater
  4. Abdullah AR, Tahir NM, Wei LK
    Bull Environ Contam Toxicol, 1994 Oct;53(4):618-26.
    PMID: 8000192
    Matched MeSH terms: Seawater/analysis*
  5. Adiana G, Shazili NA, Marinah MA, Bidai J
    Environ Monit Assess, 2014 Jan;186(1):421-31.
    PMID: 23974537 DOI: 10.1007/s10661-013-3387-9
    Concentrations of trace metals in the South China Sea (SCS) were determined off the coast of Terengganu during the months of May and November 2007. The concentrations of dissolved and particulate metals were in the range of 0.019-0.194 μg/L and 50-365 μg/g, respectively, for cadmium (Cd), 0.05-0.45 μg/L and 38-3,570 μg/g for chromium (Cr), 0.05-3.54 μg/L and 21-1,947 μg/g for manganese (Mn), and 0.03-0.49 μg/L and 2-56,982 μg/g for lead (Pb). The order of mean log K D found was Cd > Cr > Pb > Mn. The study suggests that the primary sources of these metals are discharges from the rivers which drain into the SCS, in particular the Dungun River, which flows in close proximity to agricultural areas and petrochemical industries. During the northeast monsoon, levels of particulate metals in the bottom water samples near the shore were found to be much higher than during the dry season, the probable result of re-suspension of the metals from the bottom sediments.
    Matched MeSH terms: Seawater/chemistry
  6. Ahmad MA, Yahya WJ, Ithnin AM, Hasannuddin AK, Bakar MAA, Fatah AYA, et al.
    Environ Sci Pollut Res Int, 2018 Aug;25(24):24266-24280.
    PMID: 29948709 DOI: 10.1007/s11356-018-2492-2
    Non-surfactant water-in-diesel emulsion fuel (NWD) is an alternative fuel that has the potential to reduce major exhaust emissions while simultaneously improving the combustion performance of a diesel engine. NWD comprises of diesel fuel and water (about 5% in volume) without any additional surfactants. This emulsion fuel is produced through an in-line mixing system that is installed very close to the diesel engine. This study focuses mainly on the performance and emission of diesel engine fuelled with NWD made from different water sources. The engine used in this study is a direct injection diesel engine with loads varying from 1 to 4 kW. The result shows that NWD made from tap water helps the engine to reduce nitrogen oxide (NOx) by 32%. Rainwater reduced it by 29% and seawater by 19%. In addition, all NWDs show significant improvements in engine performance as compared to diesel fuel, especially in the specific fuel consumption that indicates an average reduction of 6%. It is observed that all NWDs show compelling positive effects on engine performance, which is caused by the optimum water droplet size inside NWD.
    Matched MeSH terms: Seawater
  7. Ahmad Razin Zainal Abidin, Shaymaa Mustafa, Zainal Abdul Aziz and, Kamarudin Ismail
    MATEMATIKA, 2018;34(2):173-186.
    MyJurnal
    Subsea cable laying process is a difficult task for an engineer due to many
    uncertain situations which occur during the operation. It is very often that the cable being
    laid out is not perfectly fit on the route being planned, which results in the formation of
    slack. In order to control wastages during installation, the slack needs to be minimized
    and the movement of a ship/vessel needs to be synchronized with the cable being laid out.
    The current problem was addressed using a mathematical model by considering a number
    of defining parameters such as the external forces, the cable properties and geometry. Due
    to the complexity, the model is developed for a steady-state problem assuming velocity
    of the vessel is constant, seabed is flat and the effect of wind and wave is insignificant.
    Non-dimensional system is used to scale the engineering parameters and grouped them
    into only two main parameters which are the hydrodynamic drag of the fluid and the
    bending stiffness of the cable. There are two solutions generated in this article; numerical
    and asymptotic solutions. The result of these solutions suggests that the percentage of
    slack can be reduced by the increase of the prescribed cable tension, and also the increase
    in either the drag coefficient of the sea water or the bending stiffness of the cable, similarly
    will result in lower slack percentage
    Matched MeSH terms: Seawater
  8. Ahmad Z, Mei-Wo Y, Abu Bakar AS, Shahar H
    Appl Radiat Isot, 2010 Sep;68(9):1839-45.
    PMID: 20430636 DOI: 10.1016/j.apradiso.2010.04.012
    The studies of (137)Cs and (239+240)Pu distributions in surface seawater at South China Sea within the Exclusive Economic Zone (EEZ) of Peninsular Malaysia were carried out in June 2008. The analysis results will serve as additional information to the expanded baseline data for Malaysia's marine environment. Thirty locations from extended study area were identified in the EEZ from which large volumes of surface seawater samples were collected. Different co-precipitation techniques were employed to concentrate cesium and plutonium separately. A known amount of (134)Cs and (242)Pu tracers were used as yield determinant. The precipitate slurry was collected and oven dried at 60(o)C for 1-2 days. Cesium precipitate was fine-ground and counted using gamma-ray spectrometry system at 661.62keV, while plutonium was separated from other radionuclides using anion exchange, electrodeposited and counted using alpha spectrometry. The activity concentrations of (137)Cs and (239+240)Pu were in the range of 3.40-5.89Bq/m(3) and 2.3-7.9mBq/m(3), respectively. The (239+240)Pu/(137)Cs ratios indicate that there are no new inputs of these radionuclides into the area.
    Matched MeSH terms: Seawater/chemistry*
  9. Ahmad Zaharin Aris, Mohd Harun Abdullah, Praveena SM
    Groundwater is the prime source of freshwater in most small islands. A detailed groundwater and seawater chemistry study was undertaken from March 2006 to January 2007 to examine the evolution of groundwater in the shallow aquifer of Manukan Island, Sabah, Malaysia. Coastal groundwater aquifers especially for small islands are often exposed to heavy pumping and consequently to risks of seawater intrusion. Major ion chemistry analysis showed that the groundwater quality of the island experienced changes attributed to seawater intrusion. The groundwater has undergone a compositional change from Ca-rich to Na-rich which can be explained mostly by simple mixing process and cation exchange process. From the PHREEQC simulation model, calcite, dolomite and aragonite solubility showed positive mean values (0.65; 1.11; 0.51, respectively) of the saturation indices (SI) indicating supersaturation which attributed from the simple mixing and eventually cation exchange process. This information is important in protecting and remediating the disturbed aquifer situation.
    Matched MeSH terms: Seawater
  10. Ahmad-Kamil EI, Ramli R, Jaaman SA, Bali J, Al-Obaidi JR
    ScientificWorldJournal, 2013;2013:892746.
    PMID: 24163635 DOI: 10.1155/2013/892746
    Seagrass is a valuable marine ecosystem engineer. However, seagrass population is declining worldwide. The lack of seagrass research in Malaysia raises questions about the status of seagrasses in the country. The seagrasses in Lawas, which is part of the coral-mangrove-seagrass complex, have never been studied in detail. In this study, we examine whether monthly changes of seagrass population in Lawas occurred. Data on estimates of seagrass percentage cover and water physicochemical parameters (pH, turbidity, salinity, temperature, and dissolved oxygen) were measured at 84 sampling stations established within the study area from June 2009 to May 2010. Meteorological data such as total rainfall, air temperature, and Southern Oscillation Index were also investigated. Our results showed that (i) the monthly changes of seagrass percentage cover are significant, (ii) the changes correlated significantly with turbidity measurements, and (iii) weather changes affected the seagrass populations. Our study indicates seagrass percentage increased during the El-Nino period. These results suggest that natural disturbances such as weather changes affect seagrass populations. Evaluation of land usage and measurements of other water physicochemical parameters (such as heavy metal, pesticides, and nutrients) should be considered to assess the health of seagrass ecosystem at the study area.
    Matched MeSH terms: Seawater/analysis
  11. Ahmed, Moussa Mohamed, Nik Rashida Nik Abdul Ghani, Jami, Mohammed Saedi, Mirghani, Mohamed Elwathig Saeed, Md. Noor Salleh
    MyJurnal
    Boron has been classified as a drinking water pollutant in many countries. It is harmful to many plants, exceptionally sensible plants, and human health. Therefore, boron level needs to be decreased to 0.3 mg/L for drinking water and within 0.5 mg/L to 1 mg/L for irrigation water. In this study, various operational parameters namely pH, contact time and liquid/solid ratio were investigated to determine the potential of using date seed (or date pit or date stone) to remove boron from seawater. This study's main objective was to determine boron adsorption capacities of date seeds prepared by various methods (i.e., powdered, activated, acid-treated and defatted seed) by batch adsorption process using boron contaminated synthetic seawater. The process parameters of the selected biosorbent among the four date seed preparations methods were optimized. The surface characteristics were analyzed by using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM). The results showed that acid-treated date seed was the best biosorbent in terms of removing 89.18% boron from aqueous solution at neutral pH, liquid to solid ratio of 5 within 2 hours of reaction time at room temperature (25°C±2°C).
    Matched MeSH terms: Seawater
  12. Ainon Hamzah, Saiful Hazwa Kipli, Siti Rahil Ismail, Una R, Sukiman Sarmani
    The microbial composition in coastal water of the Port Dickson beach in Negeri Sembilan, Malaysia was analyzed using several microbial indicators for the purpose of selecting the best indicator for marine water pollution. The indicators studied were total coliform (TC), fecal coliform (FC), fecal streptococci (FS) and coliphage. Five locations were selected along the Port Dickson beaches and samplings were carried out in 1998 and 2001. The results showed an increase in the number of total coliform (TC), fecal coliform (FC) and fecal streptococci (FS) between these two sampling by 98.12%, 86.12% and 99%, respectively. The numbers of TC, FC and FS exceeded the recommended limit for recreational seawater based on U.S. EPA 1986 standard. There was a positive correlation between TC, FC and FS and negative to coliphages.
    Matched MeSH terms: Seawater
  13. Akyil S, Yusof AM
    J Hazard Mater, 2007 Jun 1;144(1-2):564-9.
    PMID: 17141412
    Concentrations of uranium and thorium in seawater, sediment and some marine species taken from along the coastal areas of Malaysia were determined spectrophotometrically. The uranium and thorium concentrations in seawater were found to vary ranging from 1.80 to 4.1 and 0.14 to 0.88 microg/L, respectively. The concentration of uranium in sediment samples was reported to range from 3.00 to 6.60 microg/g while those of thorium were slightly lower ranging from 0.01 to 0.68 microg/g. The uptake of uranium and thorium in marine species was found to be rather low. Similar variations in total alpha activities in samples were also observed with the total alpha activities relatively lower than the beta activities in most samples.
    Matched MeSH terms: Seawater/analysis
  14. Alhawari ARH, Majeed SF, Saeidi T, Mumtaz S, Alghamdi H, Hindi AT, et al.
    Micromachines (Basel), 2021 Apr 07;12(4).
    PMID: 33917167 DOI: 10.3390/mi12040411
    The increasing needs of free licensed frequency bands like Industrial, Scientific, and Medical (ISM), Wireless Local Area Network (WLAN), and 5G for underwater communications required more bandwidth (BW) with higher data transferring rate. Microwaves produce a higher transferring rate of data, and their associated devices are smaller in comparison with sonar and ultrasonic. Thus, transceivers should have broad BW to cover more of a frequency band, especially from ultra-wideband (UWB) systems, which show potential outcomes. However, previous designs of similar work for underwater communications were very complicated, uneasy to fabricate, and large. Therefore, to overcome these shortcomings, a novel compact elliptical UWB antenna is designed to resonate from 1.3 to 7.2 GHz. It is invented from a polytetrafluoroethylene (PTFE) layer with a dielectric constant of 2.55 mm and a thickness of 0.8 mm. The proposed antenna shows higher gain and radiation efficiency and stability throughout the working band when compared to recent similarly reported designs, even at a smaller size. The characteristics of the functioning antenna are investigated through fluid mediums of fresh-water, seawater, distilled water, and Debye model water. Later, its channel capacity, bit rate error, and data rate are evaluated. The results demonstrated that the antenna offers compact, easier fabrication with better UWB characteristics for underwater 5G communications.
    Matched MeSH terms: Seawater
  15. Ali HR, Arifin MM, Sheikh MA, Shazili NA, Bakari SS, Bachok Z
    Mar Pollut Bull, 2014 Aug 15;85(1):287-91.
    PMID: 24934440 DOI: 10.1016/j.marpolbul.2014.05.049
    The use of antifouling paints to the boats and ships is one among the threats facing coastal resources including coral reefs in recent decades. This study reports the current contamination status of diuron and its behaviour in the coastal waters of Malaysia. The maximum concentration of diuron was 285 ng/L detected at Johor port. All samples from Redang and Bidong coral reef islands were contaminated with diuron. Temporal variation showed relatively high concentrations but no significant difference (P>0.05) during November and January (North-East monsoon) in Klang ports (North, South and West), while higher levels of diuron were detected during April, 2012 (Inter monsoon) in Kemaman, and Johor port. Although no site has shown concentration above maximum permissible concentration (430 ng/L) as restricted by the Dutch Authorities, however, long term exposure studies for environmental relevance levels of diuron around coastal areas should be given a priority in the future.
    Matched MeSH terms: Seawater/chemistry
  16. Ali HR, Arifin MM, Sheikh MA, Mohamed Shazili NA, Bachok Z
    Mar Pollut Bull, 2013 May 15;70(1-2):253-7.
    PMID: 23490347 DOI: 10.1016/j.marpolbul.2013.02.024
    Emerging booster biocides contamination raises particular attention in the marine ecosystem health. This study provides the baseline data on the occurrence of Irgarol-1051 (2-methylthio-4-tert-butylamino-6-cyclopropylamiono-s-triazine) in the selected coastal water around Malaysia. The maximum detected concentration of Irgarol was 2021 ng/L at Klang West, commercial and cargo port. Coral reef Islands (Redang and Bidong) were relatively less contaminated compared to other coastal areas. The temporal variation revealed that only 1% of 28 stations sampled on November, 2011 was above the environmental risk limit of 24 ng/L as suggested by Dutch Authorities, while in January and April, 2012; 46% and 92% of the stations were above the limit respectively. The present findings demonstrate the wide detection of novel antifouling materials Irgarol-1051 which advocates the need for proper monitoring and conservation strategies for the coastal resources.
    Matched MeSH terms: Seawater/chemistry*
  17. Amin AKMR, Tanaka M, Al-Saari N, Feng G, Mino S, Ogura Y, et al.
    Syst Appl Microbiol, 2017 Jul;40(5):290-296.
    PMID: 28648725 DOI: 10.1016/j.syapm.2017.04.003
    Two phylogenetically distinct Vibrionaceae strains C4II189Tand C4V358Tisolated from reef seawater off Ishigaki Island, Japan, in 2014 were studied with advanced genome-based taxonomy approaches. All aspects of phylogenetic (16S rRNA phylogeny, MLSA), phenotypic and genetic (ANI, DDH, AAI, and the number of core genes) cohesions between the two identified species were high enough to propose them as members of a new genus within the family Vibrionaceae. Consequently, an eighth genus Thaumasiovibrio gen. nov. is proposed that contains two new species Thaumasiovibrio occultus sp. nov. strain C4II189T(=DSM 101554T=JCM 31629T) (type species) and Thaumasiovibrio subtropicus sp. nov. strain C4V358T(=DSM 101555T=JCM 31630T). Thaumasiovibrio species were phylogenetically distinct from the other Vibrionaceae species based on pyrH gene sequences. The combination of catalase negative, sensitivity to vibriostatic agent O/129, and green colony formation on TCBS for the phylogenetically affiliated strains was the diagnostic features for the current tentative identification of this genus.
    Matched MeSH terms: Seawater/microbiology*
  18. Amin B, Ismail A, Arshad A, Yap CK, Kamarudin MS
    Environ Monit Assess, 2009 Jan;148(1-4):291-305.
    PMID: 18274874 DOI: 10.1007/s10661-008-0159-z
    Concentrations of Cd, Cu, Pb, Zn, Ni and Fe were determined in the surface sediments to investigate the distributions, concentrations and the pollution status of heavy metals in Dumai coastal waters. Sediment samples from 23 stations, representing 5 different site groups of eastern, central and western Dumai and southern and northern Rupat Island, were collected in May 2005. The results showed that heavy metal concentrations (in microg/g dry weight; Fe in %) were 0.88 (0.46-1.89); 6.08 (1.61-13.84); 32.34 (14.63-84.90); 53.89 (31.49-87.11); 11.48 (7.26-19.97) and 3.01 (2.10-3.92) for Cd, Cu, Pb, Zn, Ni and Fe, respectively. Generally, metal concentrations in the coastal sediments near Dumai city center (eastern and central Dumai) which have more anthropogenic activities were higher than those at other stations. Average concentration of Cd in the eastern Dumai was slightly higher than effective range low (ERL) but still below effective range medium (ERM) value established by Long et al. (Environmental Management 19(1):81-97, 1995; Environmental Toxicology Chemistry 17(4):714-727, 1997). All other metals were still below ERL and ERM. Calculated enrichment factor (EF), especially for Cd and Pb, and the Pollution load index (PLI) value in the eastern Dumai were also higher than other sites. Cd showed higher EF when compared to other metals. Geo-accumulation indices (I(geo)) in most of the stations (all site groups) were categorized as class 1 (unpolluted to moderately polluted environment) and only Cd in Cargo Port was in class 2 (moderately polluted). Heavy metal concentrations found in the present study were comparable to other regions of the world and based on the calculated indices it can be classified as unpolluted to moderately polluted coastal environment.
    Matched MeSH terms: Seawater/chemistry*
  19. Amin YM, Mahat RH, Nor RM, Khandaker MU, Takleef GH, Bradley DA
    Radiat Prot Dosimetry, 2013 Oct;156(4):475-80.
    PMID: 23584496 DOI: 10.1093/rpd/nct097
    The presence of natural radioactivity and (137)Cs has been investigated in fresh media obtained from South China Sea locations off the coast of peninsular Malaysia. The media include seafood, sea water and sediment. The samples were collected some weeks prior to the devastating 2011 Tōhoku earthquake and associated tsunami, the occurrence of which precipitated the Fukushima incident. All samples showed the presence of naturally occurring (226)Ra, (228)Ra and primordial (40)K, all at typically prevailing levels. The concentrations of natural radioactivity in molluscs were found to be greater than that of other marine life studied herein, the total activity ranging from 337 to 393 Bq kg(-1) dry weight. The total activity in sea water ranged from 15 to 88 Bq l(-1). Sediment samples obtained at deep sea locations more than 20 km offshore further revealed the presence of (137)Cs. The activity of (137)Cs varied from ND to 0.5 Bq kg(-1) dry weight, the activity increasing with offshore distance and depth. The activity concentrations presented herein should be considered useful in assessing the impact of any future radiological contamination to the marine environment.
    Matched MeSH terms: Seawater
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links