Displaying publications 1 - 20 of 50 in total

Abstract:
Sort:
  1. Fulltext Supramolecular Nested Microbeads as Building Blocks for Macroscopic Self-Healing Scaffolds
    Yu Z, Liu J, Tan CSY, Scherman OA, Abell C
    Angew Chem Int Ed Engl, 2018 03 12;57(12):3079-3083.
    PMID: 29377541 DOI: 10.1002/anie.201711522
    The ability to construct self-healing scaffolds that are injectable and capable of forming a designed morphology offers the possibility to engineer sustainable materials. Herein, we introduce supramolecular nested microbeads that can be used as building blocks to construct macroscopic self-healing scaffolds. The core-shell microbeads remain in an "inert" state owing to the isolation of a pair of complementary polymers in a form that can be stored as an aqueous suspension. An annealing process after injection effectively induces the re-construction of the microbead units, leading to supramolecular gelation in a preconfigured shape. The resulting macroscopic scaffold is dynamically stable, displaying self-recovery in a self-healing electronic conductor. This strategy of using the supramolecular assembled nested microbeads as building blocks represents an alternative to injectable hydrogel systems, and shows promise in the field of structural biomaterials and flexible electronics.
    Matched MeSH terms: Suspensions
  2. Oral fast-release solid dispersion-paradigm shift to nanoparticles
    Wong TW
    Recent Pat Drug Deliv Formul, 2011 Sep;5(3):227-43.
    PMID: 21834774
    Design of oral fast-release solid dispersion of poorly water-soluble drugs has been a great challenge over past decades on issues of drug recrystallization, drug polymorphism, formulation limited to low drug-to-carrier ratio and drug particle aggregation in matrix. The complexity in solid dispersion design is envisaged to be resolvable by the use of nanoparticulate system as solid dosage form. This manuscript reviews several patented processing approaches of nanoparticulate solid dispersion that have been reported recently. Through drug nanoencapsulation, a higher content of drug may be delivered with less aggregation via placing the same drug mass in a greater number of tinier carriers. Nanoencapsulation, by its own process of formation, brings about submicron particles. Keeping drug in these nanoparticles, a remarkable rise in specific surface area of drug is realized for dissolution. The augmentation of drug dissolution can be sufficiently high to the extent that the influences of polymorphism and crystallization phenomenon on drug dissolution in a solid dispersion may be negligible.
    Matched MeSH terms: Suspensions
  3. Activity of Eurycoma longifolia root extract against Plasmodium falciparum in vitro
    Wernsdorfer WH, Ismail S, Chan KL, Congpuong K, Wernsdorfer G
    Wien Klin Wochenschr, 2009 Oct;121 Suppl 3:23-6.
    PMID: 19915812 DOI: 10.1007/s00508-009-1230-7
    The habitats of Eurycoma longifolia Jack, a slender tree, are jungles in Malaysia and Indonesia. It belongs to the family Simaroubaceae and is a source of quassinoids with anabolic, antimalarial and cytostatic activity. In this study, conducted during 2008 in Mae Sot, Thailand, a standardized extract of E. longifolia containing three major quassinoids, eurycomanone (1), 13,21-dihydroeurycomanone (2) and 13alpha(21)-epoxyeurycomanone (3) was evaluated for antiplasmodial activity against Plasmodium falciparum and its activity has been compared with that of artemisinin, using 38 fresh parasite isolates and assessment of inhibition of schizont maturation. The IC(50), IC(90) and IC(99) values for artemisinin were 4.30, 45.48 and 310.97 microg/l, and those for the root extract from E. longifolia 14.72, 139.65 and 874.15 microg/l respectively. The GMCOC for artemisinin was 337.81 mug/l, and for the plant extract it was 807.41 microg/l. The log-concentration probit regressions were parallel. The inhibitory activity of the E. longifolia extract was higher than that expected from the three quassinoids isolated from the plant, suggesting synergism between the quassinoids or the presence of other unidentified compounds.
    Matched MeSH terms: Suspensions
  4. Grain size analysis of surface Fluvial sediments in rivers in Kelantan, Malaysia
    WAN HANNA MELINI WAN MOHTAR, SITI AMINAH BASSA, MOJTABA PORHEMMAT
    Sains Malaysiana, 2017;46:685-693.
    Grain size spectrum and textural parameters for the fluvial sediment bed in seven tropical rivers of Kelantan, Malaysia are presented in this article. The samples were collected from six tributaries to the main Sungai Kelantan spanning approximately 248 km stretch of water streams. Sand or gravel dominated river was identified for each river using the sediment composition analysis. Textural pattern shows complicated profiles of mean size and no consistent decreasing grain size and gradation parameter were observed towards the downstream flow. Most of the samples fall under the category of either very poorly sorted or poorly sorted and has very platykurtic kurtosis distributions. CM diagram (C=one percentile in microns and M = median grain size in microns) suggested that the deposition of fine-grained sediment for samples with median grain size d50 <1 mm are either by rolling, rolling and saltation or saltation and suspension.
    Matched MeSH terms: Suspensions
  5. Fulltext Development of a Two-Stage Microalgae Dewatering Process - A Life Cycle Assessment Approach
    Soomro RR, Ndikubwimana T, Zeng X, Lu Y, Lin L, Danquah MK
    Front Plant Sci, 2016;7:113.
    PMID: 26904075 DOI: 10.3389/fpls.2016.00113
    Even though microalgal biomass is leading the third generation biofuel research, significant effort is required to establish an economically viable commercial-scale microalgal biofuel production system. Whilst a significant amount of work has been reported on large-scale cultivation of microalgae using photo-bioreactors and pond systems, research focus on establishing high performance downstream dewatering operations for large-scale processing under optimal economy is limited. The enormous amount of energy and associated cost required for dewatering large-volume microalgal cultures has been the primary hindrance to the development of the needed biomass quantity for industrial-scale microalgal biofuels production. The extremely dilute nature of large-volume microalgal suspension and the small size of microalgae cells in suspension create a significant processing cost during dewatering and this has raised major concerns towards the economic success of commercial-scale microalgal biofuel production as an alternative to conventional petroleum fuels. This article reports an effective framework to assess the performance of different dewatering technologies as the basis to establish an effective two-stage dewatering system. Bioflocculation coupled with tangential flow filtration (TFF) emerged a promising technique with total energy input of 0.041 kWh, 0.05 kg CO2 emissions and a cost of $ 0.0043 for producing 1 kg of microalgae biomass. A streamlined process for operational analysis of two-stage microalgae dewatering technique, encompassing energy input, carbon dioxide emission, and process cost, is presented.
    Matched MeSH terms: Suspensions
  6. Fulltext The effect of pH on the survival of leptospires in water
    Smith CE, Turner LH
    Bull World Health Organ, 1961;24(1):35-43.
    PMID: 20604084
    One of the factors on which the incidence of leptospirosis is dependent is the survival time of shed leptospires in surface water or soil water, and this time is in turn affected by the acidity or alkalinity of the water. The authors have therefore studied the survival of four leptospiral serotypes in buffered distilled water at pH's ranging from 5.3 to 8.0. All survived longer in alkaline than in acid water, and significant differences between the serotypes were found in response to pH. Survival at pH's under 7.0 ranged from 10 to 117 days and at pH's over 7.0 from 21 to 152 days. Survival was also studied in aqueous extracts of soil samples from different areas in Malaya; no correlation was found between pH and survival time.It was also noted that in a group of Malayan ricefields a low incidence of leptospirosis in man was accompanied by a high infection rate among rodents, and when it was found that this phenomenon could not be explained by pH or salinity, attention was turned to the soil. Bentonite clay, similar to the montmorrillonite clay of the ricefields, was found to adsorb about half the leptospires in suspension. The authors recommend that field study of this laboratory observation be undertaken.
    Matched MeSH terms: Suspensions
  7. Fulltext Suppression of non-Albicans candida species (NAC) biofilm formation by probiotic Streptococcus salivarius
    Sharmeen Nellisa Soffian, Nurul Alia Risma Rismayuddin, Munirah Mokhtar, Mohd Hafiz Arzmi
    Malaysian Journal of Medicine and Health Sciences, 2019;15(108):41-41.
    MyJurnal
    Introduction:Candida spp. are most common opportunistic pathogenic yeast that inhabit human oral cavity, epider-mis, gastrointestinal tract, and vagina leading to candidiasis. The transition of this yeast from commensal to potent pathogen is facilitated by numbers of virulence factors including biofilm formation. While most reports on candidi-asis are associated with formation Candida albicans biofilms, however, non-albicans Candida species prevalence is of growing concern. Recently, the use of probiotics as antifungal and antibiofilm has gained an increasing attention. As such, we aim to evaluate the inhibitory effect of monomicrobial and polymicrobial of Streptococcus salivariuson six strains of NAC namely Candida dubliniensis, Candida glabrata, Candida krusei, Candida lusitanaei, Candida parapsilosis and Candida tropicalis. Methods: Antifungal activity of S. salivarius on NAC species was performed using well diffusion method on Mueller Hinton Agar (MHA) and the diameter of inhibition zone were assessed. For formation of monomicrobial biofilm, standardized cell suspensions of NAC species (1 x 105 cells/ml) and probiotic Streptococcus salivarius (1 x 106 cells/ml) were grown in RPMI or nutrient broth media at 37°C for 72 h. Meanwhile to study polymicrobial biofilm of both NAC and S. salivarius, similar protocol was employed by inoculating both microorganisms with a similar cell density as in monomicrobial. Finally, biofilm formation was assessed through quantification of total biomass by crystal violet (CV) assay and the absorbance of adherent biofilm was measured in triplicate at 620nm. Results: Antifungal susceptibility testing of S. salivarius on all six NAC species discerned no zone of inhibition. Furthermore, our results showed variability of monomicrobial and polymicrobial biofilm biomass between NAC species and growth medium. All six polymicrobial NB-grown and RPMI-grown exhibited decreased of the biofilm formation. C. parapsilosis co-cultured with S. salivarius in NB medium had shown lowest biofilm bio-mass by 75.51+_1.34% while in RPMI medium, C. lusitanaei demonstrated with most reduced biofilm biomass by 67.03+_5.19. Conclusion: Our study elucidated the antagonistic relationship between Streptococcus salivarius and non-albicans Candida by supressing the growth of polymicrobial biofilm and pseudohyphae/hyphae of NAC species.
    Matched MeSH terms: Suspensions
  8. Thrombocyte counts in mice after the administration of papaya leaf suspension
    Sathasivam K, Ramanathan S, Mansor SM, Haris MR, Wernsdorfer WH
    Wien Klin Wochenschr, 2009 Oct;121 Suppl 3:19-22.
    PMID: 19915811 DOI: 10.1007/s00508-009-1229-0
    Following up a popular use of crude leaf preparations from Carica papaya for the treatment of dengue infections, a suspension of powdered Carica papaya leaves in palm oil has been investigated for its effect on thrombocyte counts in mice, administering by gavage 15 mg of powdered leaves per kg body weight to 5 mice. Equal numbers of animals received corresponding volumes of either palm oil alone or physiological saline solution. Thrombocyte counts before and at 1, 2, 4, 8, 10, 12, 24, 48 and 72 hours after dosing revealed significantly higher mean counts at 1, 2, 4, 8, 10 and 12 after dosing with the C. papaya leaf formulation as compared to the mean count at hour 0. There was only a non-significant rise of thrombocyte counts in the group having received saline solution, possibly the expression of a normal circadian rhythm in mice. The group having received palm oil only showed a protracted increase of platelet counts that was significant at hours 8 and 48 and obviously the result of a hitherto unknown stimulation of thrombocyte release. The results call for a dose-response investigation and for extending the studies to the isolation and identification of the C. papaya substances responsible for the release and/or production of thrombocytes.
    Matched MeSH terms: Suspensions
  9. First Report of Pseudoperonospora cubensis Causing Downy Mildew of Trichosanthes cucumerina in Malaysia
    Salati M, Wong MY, Sariah M, Nik Masdek H
    Plant Dis, 2010 May;94(5):642.
    PMID: 30754434 DOI: 10.1094/PDIS-94-5-0642A
    In December 2008, infected leaves of Trichosanthes cucumerina were observed on commercial cucurbit farms located in Pontian, Johor (south of West Malaysia). Bright yellow and small necrotic lesions were observed on the adaxial surface of the leaves, whereas sporangiophores were observed on pale yellowish brown-to-brown lesions on the abaxial surface. The length and width of the sporangia ranged from 19 to 36 μm (28.6) and 11 to 23 μm (17.6), respectively. The length of the sporangiophores ranged from 310 to 450 μm, with an average length of 380 μm. The pathogen was identified as Pseudoperonospora cubensis on the basis of the morphological criteria described by Palti and Cohen (2). To confirm the morphological findings, DNA was extracted from symptomatic tissue and the internal transcribed spacer (ITS) region was PCR amplified using primers ITS5-P2 and ITS4 (3). The appropriate-sized amplicon was gel excised and column purified and then submitted for direct sequencing. The resulting 802 bp amplified ITS region was 100% identical to published P. cubensis sequences (GenBank Accession Nos. EU876603, EU876584, and AY198306). This sequence was deposited with NCBI GenBank under the Accession No. GU233293. In this study, pathogenicity tests were conducted using detached leaf disc assays (1) and a P. cubensis isolate obtained from T. cucumerina. For this purpose, leaf discs were excised from 6- to 8-week-old leaves of T. cucumerina using a 20-mm cork borer. Five leaf discs were placed with their abaxial surface facing upward on moist filter paper in petri dishes. Each of four leaf discs was inoculated with four 10-μl droplets of a 1 × 105 per ml sporangial suspension, whereas the fifth disc was inoculated with water droplets and served as a control. Three replications were completed. The leaf discs were placed in darkness at 14 ± 2°C for 24 h and subsequently incubated with a 12-h photoperiod. After 10 days, sporulation was observed on the sporangia-inoculated leaf discs with similar morphological features to the initial field samples. To our knowledge, this is the first report of P. cubensis causing downy mildew of T. cucumerina in Malaysia. References: (1) A. Lebeda and M. P. Widrlechner. J. Plant Dis. Prot. 110:337, 2003. (2) J. Palti and Y. Cohen. Phytoparasitica 8:109, 1980. (3) H. Voglmayr and O. Constantinescu. Mycol. Res. 112:487, 2008.
    Matched MeSH terms: Suspensions
  10. First Report of Gliocephalotrichum bacillisporum Causing Fruit Rot of Rambutan (Nephelium lappaceum) in Malaysia
    Sakinah MAI, Latiffah Z
    Plant Dis, 2013 Aug;97(8):1110.
    PMID: 30722495 DOI: 10.1094/PDIS-09-12-0831-PDN
    Rambutan (Nephelium lappaceum L.) is among the tropical fruit grown in Malaysia and the demand for export rose in 2011. A fruit rot was observed between August and December 2011 from several areas in the states of Pulau Pinang and Perak, Malaysia. The symptoms initially appeared as light brown, water-soaked lesions that developed first in the pericarp and pulp, later enlarging and becoming dark brown. Greyish brown mycelia were observed on infected areas that turned yellowish at later stages of infection. Gliocephalotrichum bacillisporum was isolated from infected fruit by surface sterilization techniques. Conidia were mass-transferred onto potato dexstrose agar (PDA) plates and incubated at 27 ± 1°C. Tissue pieces (5 × 5 mm) excised from the margins between infected and healthy areas were then surface sterilized in 1% sodium hypochlorite for 3 to 5 min before being rinsed with distilled water, plated on PDA, and incubated at 27 ± 1°C for 7 days. Ten isolates of G. bacillisporum were obtained. Colonies on PDA were initially white before turning yellow with a feathery appearance. Microscopic characteristics on carnation leaf agar (CLA) consisted of hyaline conidia that were slightly ellipsoid to bacilliform with rounded apex ranging from 6.0 to 8.5 μm long and 2.0 to 2.5 μm wide. Conidiophores (70 to 130 μm long) were mostly single arising from large hypha approximately 13 to 16 μm. The conidiogenous structures were mostly quadriverticillate with dense, short, penicillate branches. The phialides were cylindrical and finger-like. Chlamydospores were present singly, in groups of 2 to 4, or in occasionally branched short chains and were brown in color with thick walls ranging from 11 to 13 μm. The cultural and morphological characteristics of G. bacillisporum isolates in the present study were very similar to previously published descriptions (1) except the conidiophores formed without sterile stipe extensions. All the G. bacillisporum isolates were deposited in culture collection at the Plant Pathology Lab, University Sains Malaysia, Penang. Molecular identification was accomplished from the ITS regions using ITS1 and ITS2 primers, and the β-tubulin gene using Bt2a and Bt2b primers (2). BLAST results from the ITS regions showed a 98 to 99% similarity with sequences of G. bacillisporum isolates reported in GenBank. Accession numbers of G. bacillisporum ITS regions: JX484850, JX484852, JX484853, JX484856, JX484858, JX484860, JX484862, JX484866, JX484867, and JX484868. The identity of G. bacillisporum isolates infecting rambutan was further confirmed by β-tubulin sequences (KC683909, KC683911, KC683912, KC683916, KC683919, KC683920, KC683923, KC683926, and KC683927), which showed 92 to 95% similarity with sequences of G. bacillisporum. Pathogenicity tests were also performed using mycelial plug (5 mm) and sprayed conidial suspensions (20 μl suspension of 106 conidia/ml) prepared from 7-day-old cultures. Inoculated fruits were incubated at 27 ± 1°C and after 10 days, similar rotting symptoms appeared on the fruit surface. The pathogen was reisolated from fruit rot lesions, thus fulfilling Koch's postulates, and tests were repeated twice. To our knowledge, this is the first report of G. bacillisporum causing fruit rot of rambutan (N. lappaceum L.) in Malaysia. References: (1) C. Decock et al. Mycologia 98:488, 2006. (2) N. L. Glass and G. C. Donaldson. Appl. Environ Microbiol. 61:1323, 1995.
    Matched MeSH terms: Suspensions
  11. Occurrence, distribution, and dechlorination of polychlorinated biphenyls and health risk assessment in Selangor River basin
    Sakai N, Dayana E, Abu Bakar A, Yoneda M, Nik Sulaiman NM, Ali Mohd M
    Environ Monit Assess, 2016 Oct;188(10):592.
    PMID: 27679511
    Polychlorinated biphenyls (PCBs) were monitored in surface water collected in the Selangor River basin, Malaysia, to identify the occurrence, distribution, and dechlorination process as well as to assess the potential adverse effects to the Malaysian population. Ten PCB homologs (i.e., mono-CBs to deca-CBs) were quantitated by using gas chromatography-mass spectrometry (GC/MS). The total concentration of PCBs in the 10 sampling sites ranged from limit of detection to 7.67 ng L(-1). The higher chlorinated biphenyls (tetra-CBs to deca-CBs) were almost not detected in most of the sampling sites, whereas lower chlorinated biphenyls (mono-CBs, di-CBs, and tri-CBs) dominated more than 90 % of the 10 homologs in all the sampling sites. Therefore, the PCB load was estimated to be negligible during the sampling period because PCBs have an extremely long half-life. The PCBs, particularly higher chlorinated biphenyls, could be thoroughly dechlorinated to mono-CBs to tri-CBs by microbial decomposition in sediment or could still be accumulated in the sediment. The lower chlorinated biphenyls, however, could be resuspended or desorbed from the sediment because they have faster desorption rates and higher solubility, compared to the higher chlorinated biphenyls. The health risk for the Malaysia population by PCB intake that was estimated from the local fish consumption (7.2 ng kg(-1) bw day(-1)) and tap water consumption (1.5 × 10(-3)-3.1 × 10(-3) ng kg(-1) bw day(-1)) based on the detected PCB levels in the surface water was considered to be minimal. The hazard quotient based on the tolerable daily intake (20 ng kg(-1) bw day(-1)) was estimated at 0.36.
    Matched MeSH terms: Suspensions
  12. Fulltext Telescopic synthesis of cellulose nanofibrils with a stable dispersion of Fe(0) nanoparticles for synergistic removal of 5-fluorouracil
    Sajab MS, Mohan D, Santanaraj J, Chia CH, Kaco H, Harun S, et al.
    Sci Rep, 2019 08 12;9(1):11703.
    PMID: 31406228 DOI: 10.1038/s41598-019-48274-2
    The recognition of cellulose nanofibrils (CNF) in the past years as a high prospect material has been prominent, but the impractical cellulose extraction method from biomass remained as a technological barrier for industrial practice. In this study, the telescopic approach on the fractionation of lignin and cellulose was performed by organosolv extraction and catalytic oxidation from oil palm empty fruit bunch fibers. The integration of these techniques managed to synthesize CNF in a short time. Aside from the size, the zeta potential of CNF was measured at -41.9 mV, which allow higher stability of the cellulose in water suspension. The stability of CNF facilitated a better dispersion of Fe(0) nanoparticles with the average diameter size of 52.3-73.24 nm through the formulation of CNF/Fe(0). The total uptake capacity of CNF towards 5-fluorouracil was calculated at 0.123 mg/g. While the synergistic reactions of adsorption-oxidation were significantly improved the removal efficacy three to four times greater even at a high concentration of 5-fluorouracil. Alternatively, the sludge generation after the oxidation reaction was completely managed by the encapsulation of Fe(0) nanoparticles in regenerated cellulose.
    Matched MeSH terms: Suspensions
  13. Analysis of Terpenoid Indole Alkaloids, Carotenoids, Phytosterols, and NMR-Based Metabolomics for Catharanthus roseus Cell Suspension Cultures
    Saiman MZ, Mustafa NR, Verpoorte R
    Methods Mol Biol, 2018;1815:437-455.
    PMID: 29981141 DOI: 10.1007/978-1-4939-8594-4_31
    The plant Catharanthus roseus is a rich source of terpenoid indole alkaloids (TIA). Some of the TIA are important as antihypertensive (ajmalicine) and anticancer (vinblastine and vincristine) drugs. However, production of the latter is very low in the plant. Therefore, in vitro plant cell cultures have been considered as a potential supply of these chemicals or their precursors. Some monomeric alkaloids can be produced by plant cell cultures, but not on a level feasible for commercialization, despite extensive studies on this plant that deepened the understanding of the TIA biosynthesis and its regulation. In order to analyze the metabolites in C. roseus cell cultures, this chapter presents the method of TIA, carotenoids, and phytosterols analyses. Furthermore, an NMR-based metabolomics approach to study C. roseus cell culture is described.
    Matched MeSH terms: Suspensions
  14. A facile, bio-based, novel approach for synthesis of covalently functionalized graphene nanoplatelet nano-coolants toward improved thermo-physical and heat transfer properties
    Sadri R, Hosseini M, Kazi SN, Bagheri S, Abdelrazek AH, Ahmadi G, et al.
    J Colloid Interface Sci, 2018 Jan 01;509:140-152.
    PMID: 28898734 DOI: 10.1016/j.jcis.2017.07.052
    In this study, we synthesized covalently functionalized graphene nanoplatelet (GNP) aqueous suspensions that are highly stable and environmentally friendly for use as coolants in heat transfer systems. We evaluated the heat transfer and hydrodynamic properties of these nano-coolants flowing through a horizontal stainless steel tube subjected to a uniform heat flux at its outer surface. The GNPs functionalized with clove buds using the one-pot technique. We characterized the clove-treated GNPs (CGNPs) using X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). We then dispersed the CGNPs in distilled water at three particle concentrations (0.025, 0.075 and 0.1wt%) in order to prepare the CGNP-water nanofluids (nano-coolants). We used ultraviolet-visible (UV-vis) spectroscopy to examine the stability and solubility of the CGNPs in the distilled water. There is significant enhancement in thermo-physical properties of CGNPs nanofluids relative those for distilled water. We validated our experimental set-up by comparing the friction factor and Nusselt number for distilled water obtained from experiments with those determined from empirical correlations, indeed, our experimental set-up is reliable and produces results with reasonable accuracy. We conducted heat transfer experiments for the CGNP-water nano-coolants flowing through the horizontal heated tube in fully developed turbulent condition. Our results are indeed promising since there is a significant enhancement in the Nusselt number and convective heat transfer coefficient for the CGNP-water nanofluids, with only a negligible increase in the friction factor and pumping power. More importantly, we found that there is a significant increase in the performance index, which is a positive indicator that our nanofluids have potential to substitute conventional coolants in heat transfer systems because of their overall thermal performance and energy savings benefits.
    Matched MeSH terms: Suspensions
  15. Transformation of cyclodextrin glucanotransferase (CGTase) from aqueous suspension to fine solid particles via electrospraying
    Saallah S, Naim MN, Mokhtar MN, Abu Bakar NF, Gen M, Lenggoro IW
    Enzyme Microb Technol, 2014 Oct;64-65:52-9.
    PMID: 25152417 DOI: 10.1016/j.enzmictec.2014.06.002
    In this study, the potential of electrohydrodynamic atomization or electrospraying to produce nanometer-order CGTase particles from aqueous suspension was demonstrated. CGTase enzyme was prepared in acetate buffer solution (1% v/v), followed by electrospraying in stable Taylor cone-jet mode. The deposits were collected on aluminium foil (collector) at variable distances from the tip of spraying needle, ranging from 10 to 25 cm. The Coulomb fission that occurs during electrospraying process successfully transformed the enzyme to the solid state without any functional group deterioration. The functional group verification was conducted by FTIR analysis. Comparison between the deposit and the as-received enzyme in dry state indicates almost identical spectra. By increasing the distance of the collector from the needle tip, the average particle size of the solidified enzyme was reduced from 200±117 nm to 75±34 nm. The average particle sizes produced from the droplet fission were in agreement with the scaling law models. Enzyme activity analysis showed that the enzyme retained its initial activity after the electrospraying process. The enzyme particles collected at the longest distance (25 cm) demonstrated the highest enzyme activity, which indicates that the activity was controlled by the enzyme particle size.
    Matched MeSH terms: Suspensions
  16. Isolation and characterization of differentially expressed transcripts from the suspension cells of oil palm (Elaeis guineensis Jacq.) in response to different concentration of auxins
    Roowi SH, Ho CL, Alwee SS, Abdullah MO, Napis S
    Mol Biotechnol, 2010 Sep;46(1):1-19.
    PMID: 20390382 DOI: 10.1007/s12033-010-9262-9
    Oil palm suspension cultures were initiated by transferring the gel-like friable embryogenic tissue onto liquid medium supplemented with auxins. In this study, transcripts that were differentially expressed in oil palm suspension cells cultured at different auxin concentrations were examined using suppression subtractive hybridization. Total RNA was first isolated from oil palm suspension cells proliferated in liquid medium with different hormone concentrations for 6 months. Four different hormone combinations: T1 (0.1 mg/l 2,4-D and 1.0 mg/l NAA), T2 (0.4 mg/l 2,4-D and 1.0 mg/l NAA), T3 (1.0 mg/l NAA), and T4 (0.4 mg/l 2,4-D) were used for the treatments. The first and second subtractions were performed using samples T1 and T2 in forward and reverse order. The other two subtractions were forward and reverse subtractions of T3 and T4, respectively. Reverse northern analyses showed that 14.13% of these clones were preferentially expressed in T1, 13.70% in T2, 14.75% in T3, and 15.70% in T4. Among the 294 cDNA clones that were sequenced, 61 contigs (assembled from 165 sequences) and 129 singletons were obtained. Among the 61 contigs, 10 contigs consist of sequences from treatment T1, 8 contigs were from treatment T2, 10 contigs were contains sequences of treatment T3 and 13 contigs contains sequences of treatment T4. Northern analyses of five transcripts that were shown to be differentially expressed in the oil palm suspension cells by reverse northern analysis revealed that transcripts 16A1 (a putative lignostilbene-alpha,beta-dioxygenase, EgLSD) and 16H12 (a putative ethylene responsive 6, EgER6) were differentially expressed in oil palm suspension cells treated with different levels of auxin.
    Matched MeSH terms: Suspensions
  17. Production, Characterization and Evaluation of Kaempferol Nanosuspension for Improving Oral Bioavailability
    Qian YS, Ramamurthy S, Candasamy M, Shadab M, Kumar RH, Meka VS
    Curr Pharm Biotechnol, 2016;17(6):549-55.
    PMID: 26813303
    CONTEXT: Kaempferol has a large particle size and poor water solubility, leading to poor oral bioavailability. The present work aimed to develop a kaempferol nanosuspension (KNS) to improve pharmacokinetics and absolute bioavailability.

    METHODS: A nanosuspension was prepared using high pressure homogenization (HPH) techniques. The physico-chemical properties of the kaempferol nanosuspension (KNS) were characterized using photon correlation spectroscopy (PCS), transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FTIR) and x-ray diffractometry (XRD). A reversephase high performance liquid chromatography (RP-HPLC) method for the analysis of the drug in rat plasma was developed and validated as per ICH guidelines. In vivo pharmacokinetic parameters of oral pure kaempferol solution, oral kaempferol nanosuspension and intravenous pure kaempferol were assessed in rats.

    RESULTS AND DISCUSSION: The kaempferol nanosuspension had a greatly reduced particle size (426.3 ± 5.8 nm), compared to that of pure kaempferol (1737 ± 129 nm). The nanosuspension was stable under refrigerated conditions. No changes in physico-chemical characteristics were observed. In comparison to pure kaempferol, kaempferol nanosuspension exhibited a significantly (P<0.05) increased in Cmax and AUC(0-∞) following oral administration and a significant improvement in absolute bioavailability (38.17%) compared with 13.03% for pure kaempferol.

    CONCLUSION: These results demonstrate enhanced oral bioavailability of kaempferol when formulated as a nanosuspension.

    Matched MeSH terms: Suspensions
  18. Fulltext Influence of the Encapsulation Efficiency and Size of Liposome on the Oral Bioavailability of Griseofulvin-Loaded Liposomes
    Ong SG, Ming LC, Lee KS, Yuen KH
    Pharmaceutics, 2016;8(3).
    PMID: 27571096 DOI: 10.3390/pharmaceutics8030025
    The objective of the present study was to investigate the influence of the encapsulation efficiency and size of liposome on the oral bioavailability of griseofulvin-loaded liposomes. Griseofulvin-loaded liposomes with desired characteristics were prepared from pro-liposome using various techniques. To study the effect of encapsulation efficiency, three preparations of griseofulvin, namely, griseofulvin aqueous suspension and two griseofulvin-loaded liposomes with different amounts of griseofulvin encapsulated [i.e., F1 (32%) and F2(98%)], were administered to rats. On the other hand, to study the effect of liposome size, the rats were given three different griseofulvin-loaded liposomes of various sizes, generated via different mechanical dispersion techniques [i.e., FTS (142 nm), MS (357 nm) and NS (813 nm)], but with essentially similar encapsulation efficiencies (about 93%). Results indicated that the extent of bioavailability of griseofulvin was improved 1.7-2.0 times when given in the form of liposomes (F1) compared to griseofulvin suspension. Besides that, there was an approximately two-fold enhancement of the extent of bioavailability following administration of griseofulvin-loaded liposomes with higher encapsulation efficiency (F2), compared to those of F1. Also, the results showed that the extent of bioavailability of liposomal formulations with smaller sizes were higher by approximately three times compared to liposomal formulation of a larger size. Nevertheless, a further size reduction of griseofulvin-loaded liposome (≤400 nm) did not promote the uptake or bioavailability of griseofulvin. In conclusion, high drug encapsulation efficiency and small liposome size could enhance the oral bioavailability of griseofulvin-loaded liposomes and therefore these two parameters deserve careful consideration during formulation.
    Matched MeSH terms: Suspensions
  19. Fulltext The effect of agitation speed on the co-deposition of Ni–SiC composite coating
    Nur Azam Badarulzaman, Lee, Chung Heung, Ahmad Azmin Mohamad, Zainal Arifin Ahmad, Purwadaria, Sunara
    Journal of Nuclear and Related Technologies, 2007;2007(1):83-86.
    MyJurnal
    Ni–SiC composite coatings were electrodeposited from a Watts-type bath containing 5 g/l SiC particles in suspension. The particles were dispersed with the aid of mechanical agitation at 75 rpm and 150 rpm. EDX analysis confirmed the existence of Ni and SiC in the coatings. The effects of agitation speed on hardness properties of the coatings were investigated. SEM results showed that lower agitation speed could improve the amount of co-deposited SiC particles and increase the hardness of the composite coatings. The bonding between the Ni metal matrix and the SiC ceramic particles was compact.
    Matched MeSH terms: Suspensions
  20. Fulltext Sensitivity of Acanthamoeba cyst to antimicrobial agents
    Noradilah, S. A., Mohamed Kamel, A. G., Anisah, N., Noraina, A. R., Yusof, S.
    Malaysian Journal of Medicine and Health Sciences, 2010;6(1):111-117.
    MyJurnal
    Introduction: Acanthamoeba is an ubiquitous free-living protozoa which causes serious ocular problems. Acanthamoeba keratitis is becoming more prevalent amongst contact lens wearers. The disease can cause loss of vision and blindness if not treated properly. The objective of this research is to study the sensitivity of six Acanthamoeba spp. isolates, of which three were from the clinical isolates (HKL 95, HTH 40 and HS 6) and the remaining three from environmental isolates (TTT 9, TL 3 and SMAL 8) to antimicrobial agents. Methods: The antimicrobial agents chosen for this purpose were polyhexamethylene biguanide (PHMB) and chlorhexidine. Serial dilutions were perfomed for polyhexamethylene biguanide and chlorhexidine. Cyst suspensions from the chosen isolates were exposed to PHMB and chlorhexidine respectively. After 48 hours incubation time at 30°C, each mixture was filtered and filtration membrane was put onto non-nutrient agar laid with Escherichia coli. The agar plates were incubated for three days at 30°C and examined daily until day 14 to detect the presence of Acanthamoeba trophozoites under the inverted microscope. The presence of trophozoites indicated the ineffectiveness of the antimicrobial agents. Results: Both of the antimicrobial agents tested were found to be effective against Acanthamoeba cysts from all the test strains. Polyhexamethylene biguanide gave a minimum cysticidal concentration (MCC) mean value of 2.848 μg/mL while chlorhexidine showed
    MCC mean value at a concentration of 3.988 μg/mL. Conlusion: It can be concluded that the Acanthamoeba cysts were sensitive to polyhexamethylene biguanide and chlorhexidine.
    Matched MeSH terms: Suspensions
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links