Displaying publications 1 - 20 of 545 in total

Abstract:
Sort:
  1. Hargreaves JA, Matejka JM, Cleaton-Jones PE, Williams S
    ASDC J Dent Child, 1995 Sep-Oct;62(5):353-5.
    PMID: 8550926
    Little new evidence on the prevalence of injury to the anterior teeth of children has been reported in the past five years and, in South Africa, trauma to the teeth of children in different ethnic groups has not been compared respectively. The purpose of this investigation was to determine the prevalence of dental trauma using well-defined criteria and to sample a specific age-group. Five regions were chosen and 1035 children in the eleven-year age-group were examined. No statistical significance was found between the ethnic groups related to the amount of injury sustained. For all groups, boys received more injuries than girls. The most common injury was fracture of the enamel of the maxillary central incisor. With 15 percent of the children receiving some level of trauma by age eleven years, this is one of the main dental treatment needs for South African children.
    Matched MeSH terms: Tooth Fractures/ethnology; Tooth Fractures/epidemiology; Tooth Injuries/ethnology; Tooth Injuries/epidemiology
  2. Rusmah M, Rahim ZH
    ASDC J Dent Child, 1992 Mar-Apr;59(2):108-10.
    PMID: 1583191
    The medicaments used in this study were buffered glutaraldehyde and formocresol. Schiff's reagent was used in the quantification of aldehyde released into the collecting medium. The results of this study clearly show that formocresol diffused throughout the dentine and cementum within fifteen minutes following a pulpotomy procedure, whereas no diffusion of buffered glutaraldehyde was observed.
    Matched MeSH terms: Tooth, Deciduous/metabolism*
  3. Boon LC, Esa R
    ASDC J Dent Child, 1991 Jul-Aug;58(4):335-6.
    PMID: 1939798
    Cysts and tumors, including odontomas, can delay the eruption of teeth. In this case the delay was due to a denticle and a cyst.
    Matched MeSH terms: Tooth, Unerupted/etiology*
  4. Fazliah, S.N., Jaafar, S., Shamsuddin, S., Zainudin, Z., Hilmi, A.B., Razila, A.R., et al.
    ASM Science Journal, 2010;4(1):1-14.
    MyJurnal
    Stem cells from human extracted deciduous teeth (SHED) have the ability to multiply much faster and double their population in culture at a greater rate, indicating that it may be in a more immature state than other type of adult stem cells. Mesenchymal stem cells (MSC) from human primary molars were isolated and cultured in media supplemented with 20% fetal bovine serum. The MSCs were confirmed using CD 105 and CD 166 and the identification of the osteoblast cells were done using reverse transcriptase polymerase chain reaction (RT-PCR) analysis. Differentiated osteoblast cells (DOC) were characterized by alkaline phosphotase and von Kossa staining followed by immunocytochemistry staining using osteocalcin and osteonectin antibodies. Further validation of SHED was done by RT-PCR to detect the presence of insulin-like growth factor 2 (IGF-2) and discoidin domain tyrosine kinase-2 (DDTK-2) transcripts, while the presence of Runx-2 mRNA was used to characterize DOC. The results showed that SHED was found positive for CD 105 and CD 166 and could differentiate into osteoblast, bone forming cells. The findings revealed the presence of distinct MSC population which had the capability to generate living human cells that could be a possible source for tissue engineering in the future.
    Matched MeSH terms: Tooth, Deciduous
  5. Alam MK, Iida J
    Acta Odontol Scand, 2013 Nov;71(6):1520-31.
    PMID: 23530813 DOI: 10.3109/00016357.2013.775336
    This study aimed to measure and compare tooth size ratios in a Bangladeshi population across the following groups: those with normal occlusion, crowding or spacing; those with normal, increased or decreased overjet; those with normal, increased or decreased overbite; those with or without dental mid-line discrepancy; and those with or without lip competence. It also presents a graphical overview of the anterior and overall ratios from the study and using available global data.
    Matched MeSH terms: Tooth/anatomy & histology*
  6. Veerabhadrappa SK, Hesarghatta Ramamurthy P, Yadav S, Bin Zamzuri AT
    Acta Odontol Scand, 2021 Oct;79(7):514-522.
    PMID: 33764264 DOI: 10.1080/00016357.2021.1901984
    OBJECTIVE: To perform a systematic review of the characteristics of ectopic mandibular third molar (EMTM) in terms of its clinical presentation, radiographic findings, associated lesions, management and post-operative complications.

    MATERIALS AND METHODS: We searched the Pubmed, Medline, Embase and EBSCO databases for full-text, peer-reviewed journal publications from January 1965 to August 2020. Data extraction was done using preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines.

    RESULTS: Our search yielded 45 case reports involving 48 EMTM teeth. The mean age of the patients was 46.3 years with an age range of 22-80 years. Thirty-two cases were seen in women as compared to 13 cases in men. The majority of the cases (42) were unilateral, with only three bilateral cases. Among the 48 EMTM teeth, 21 were seen in the condylar region followed by 13 in the ramus, seven in the sigmoid notch, three in the angle and two each in the coronoid process and the lower border of the mandible. Twenty-five EMTM teeth had histopathologically confirmed dentigerous cysts, eight teeth had chronic infection/inflammation/granulation tissue, two had radicular cysts, two had infected cysts, two teeth had normal follicular spaces, and associated lesions were not mentioned for nine teeth. The most common symptoms were swelling (33 teeth) and pain (29 teeth), and six teeth were asymptomatic. Surgical removal through intraoral approach was carried out for 27 teeth, while an extra-oral approach was adopted in 15 teeth, a spontaneous regression of the pericoronal radiolucency was noticed in one tooth, four teeth were not treated and choice of treatment was not mentioned for one tooth. Mild transient paraesthesia was frequently observed; however, serious post-surgical complications were not reported.

    CONCLUSIONS: The present review found that EMTM can present with complex clinicopathological characteristics, with a majority of the cases being asymptomatic in the beginning and turning out to be symptomatic with lesions at later stages, requiring surgical intervention.

    Matched MeSH terms: Tooth Extraction/adverse effects
  7. Alhajj MN, Salim NS, Johari Y, Syahrizal M, Abdul-Muttlib NA, Ariffin Z
    Acta Stomatol Croat, 2020 Sep;54(3):263-272.
    PMID: 33132389 DOI: 10.15644/asc54/3/4
    Objective: Endodontically treated teeth may require posts for retaining the core and replacing the coronal structures that have been lost. The objective of this study was to evaluate and compare the push-out bond strength between different types of post cemented with different types of luting cement at different types of root level.

    Materials and Methods: In this in-vitro study, a total of 48 single-rooted permanent human teeth were decoronated, and the roots were treated endodontically. Following post space preparation, the sample was divided into four groups (n= 12 each) based on the types of post and cement. Two different types of post [GC everStick®POST (ES) and Parapost® Fiber LuxTM (PF)], and two different types of cement [G-CEMTM (G), and RelyXTM Unicem (R)] were used according to the manufacturer's instructions. All roots were sectioned at the coronal and middle thirds with a thickness of 3±0.1mm. The Push-out bond strength (PBS) test was performed using a universal testing machine at a cross-head speed of 0.5mm/ min. The bond strength values were recorded, and the data were analyzed using the SPSS program. Apart from descriptive statistics, three-way ANOVA was used for the interaction of the independent variables (post, cement, and root level). For differences between the groups, the Mann-Whitney U test was used. A P-value of less than 0.05 was considered significant for all analyses.

    Results: Push-out bond strength of samples at the middle level (11.38±10.31 MPa), with PF posts (11.18±9.98 MPa), and of those luted with RelyXTM Unicem cement (13.26±8.73 MPa) was higher than that of their counterparts. The PBS means of RelyXTM Unicem cement at both root levels were much higher than PBS means of G-CEMTM cement. Three-way ANOVA test revealed a significant effect for each variable with a higher effect of cement (Sum of Squares= 1310.690; P< 0.001). No significant difference (P= 0.153) was found between the coronal and middle parts and between ES and PF posts (P= 0.058). However, a highly significant difference (P< 0.001) was found between RelyXTM Unicem and G-CEMTM cements.

    Conclusion: The type of cement had a significant effect on push-out bond strength with RelyXTM Unicem which had higher values than G-CEMTM. However, the type of post and root level had no significant effect on PBS, although Parapost® Fiber LuxTM and middle root level had higher values than their counterparts.

    Matched MeSH terms: Tooth Root; Tooth, Nonvital
  8. Takaoka H, Low VL, Tan TK, Sofian-Azirun M, Chen CD, Lau KW, et al.
    Acta Trop, 2019 Feb;190:320-328.
    PMID: 30496721 DOI: 10.1016/j.actatropica.2018.11.025
    Simulium pumatense sp. nov. is described from Vietnam, and is placed in the Simulium feuerborni species-group of the subgenus Simulium (Nevermannia) Enderlein. Its morphological characteristics include the relatively smaller numbers of the following three numerical features: inner teeth of the female mandible (15-18), minute conical processes (16) on the female cibarium, and male upper-eye facets (in 15 vertical columns and 16 horizontal rows). Keys are constructed to distinguish this species from four species of the same group in Vietnam. Our molecular analysis of the DNA barcoding COI gene shows that this species is most closely related to cytoform A of the S. feuerborni complex from Thailand.
    Matched MeSH terms: Tooth/anatomy & histology*
  9. Haque N, Widera D, Abu Kasim NH
    Adv Exp Med Biol, 2019;1084:175-186.
    PMID: 30771186 DOI: 10.1007/5584_2018_299
    BACKGROUND: The response of stem cells to paracrine factors within the host's body plays an important role in the regeneration process after transplantation. The aim of this study was to determine the viability and paracrine factor profile of stem cells from human extracted deciduous teeth (SHED) pre-cultivated in media supplemented with either foetal bovine serum (FBS) or pooled human serum (pHS) in the presence of individual human sera (iHS).

    METHODS: SHED (n = 3) from passage 4 were expanded in FBS (FBS-SHED) or pHS (pHS-SHED) supplemented media until passage 7. During expansion, the proliferation of SHED was determined. Cells at passage 7 were further expanded in human serum from four individual donors (iHS) for 120 h followed by assessment of cell viability and profiling of the secreted paracrine factors.

    RESULTS: Proliferation of SHED was significantly higher (p 

    Matched MeSH terms: Tooth, Deciduous
  10. Haque N, Abu Kasim NH
    Adv Exp Med Biol, 2017 7 22;1083:29-44.
    PMID: 28730381 DOI: 10.1007/5584_2017_74
    In regenerative therapy, in vitro expansion of stem cells is critical to obtain a significantly higher number of cells for successful engraftment after transplantation. However, stem cells lose its regenerative potential and enter senescence during in vitro expansion. In this study, the influence of foetal bovine serum (FBS) and pooled human serum (pHS) on the proliferation, morphology and migration of stem cells from human extracted deciduous teeth (SHED) was compared. SHED (n = 3) was expanded in KnockOut DMEM supplemented with either pHS (pHS-SM) or FBS (FBS-SM). pHS was prepared using peripheral blood serum of six healthy male adults, aged between 21 and 35 years old. The number of live SHED was significantly higher, from passage 5 to 7, when cultured in pHS-SM compared to those cultured in FBS-SM (p 
    Matched MeSH terms: Tooth, Deciduous/cytology*
  11. Ngeow WC, Lim D
    Adv Ther, 2016 Jul;33(7):1105-39.
    PMID: 27287853 DOI: 10.1007/s12325-016-0357-y
    INTRODUCTION: The use of corticosteroids to reduce the post-operative sequelae of lower third molar surgery, namely pain, swelling and trismus, has been well studied by many researchers over the past 6 decades. This study reviewed the reported outcome of corticosteroids used in controlling the above sequalae after third molar surgery.

    MATERIALS AND METHODS: A PubMed, Medline, EMBASE and Google search was undertaken of all controlled clinical trials on the effects of corticosteroids on pain, swelling and trismus after lower third molar surgery. The review was limited to studies published over the last 10 years (2006-2015).

    RESULTS: Of the 46 initially retrieved articles, 34 were finally included. Eleven studies compared the effect of 2 similar (but different dose) or different group of corticosteroids. Thirty-one studies reported the effects of corticosteroids on all sequale, 2 reported the outcome on swelling and trismus and another 1 on swelling and pain only. In 16 of the studies, corticosteroid use resulted in significant reductions in pain after third molar removal. Twenty-two out of 29 studies reported reduced swelling against negative control while 18 out of 25 studies reported improved mouth opening. Fourteen studies reported the benefit of corticosteroids on all 3 sequelae, with 71.4% resulted from the use of methylprednisolone.

    CONCLUSION: Although there are some conflicting effects, the results of this analysis shows in general the benefits derived from short-term use of corticosteroids in relation to pain, swelling and trismus following third molar surgical extraction, with no side effects observed.

    FUNDING: This work was supported by the University of Malaya's High Impact Research grant UM.C/625/1/HIR/MOHE/05.

    Matched MeSH terms: Tooth Extraction/methods
  12. Seow LL, Toh CG, Fok AS, Wilson NH
    Am J Dent, 2008 Oct;21(5):331-6.
    PMID: 19024261
    PURPOSE: To investigate the level and distribution of stresses in endodontically treated maxillary premolar teeth restored using various cavity designs of bonded all-ceramic restorations. The hypothesis tested was that the various all-ceramic approaches, including incorporating a pulp chamber extension in the restoration, had no influence on the stresses in the restored tooth unit.
    METHODS: Finite element packages Patran and Abaqus were used for the stress analysis. The cavity designs investigated include: (1) inlay (I); (2) inlay with palatal cusp coverage (IPC); (3) onlay (O); (4) inlay with pulp chamber extension (IPE); (5) inlay with palatal cusp coverage and pulp chamber extension (IPCPE); and (6) onlay with pulp chamber extension (OPE).
    RESULTS: In each case, tensile stresses were found to be concentrated subjacent to the occlusal fossa. Peak tensile stress and peak shear stress values along the tooth/restoration interface for IPC, O IPCPE and OPE cavity designs were found to be associated with the axiogingival line angle. Overall, the order of the various forms of restoration investigated in terms of the maximum principal stress (from greatest to lowest) was as follows: IPE > IPCPE > OPE > I > IPC > O.
    Matched MeSH terms: Tooth, Nonvital*
  13. Kohli S, Al-Haddad A, Siew AY, Nam WL, Hamdan HD, Roslan QA
    Am J Dent, 2021 04;34(2):75-79.
    PMID: 33940663
    PURPOSE: To compare the bleaching efficacy of in-office (Opalescence), professional home (LumiBrite), over the counter (WhiteLight) and natural (strawberry extract) bleaching agents.

    METHODS: 80 teeth were selected and divided into two groups which were stained with black coffee and red wine respectively. The stained specimens were subdivided into four subgroups to be bleached with Opalescence, LumiBrite, WhiteLight and strawberry extract. Color measurements were made using spectrophotometer at baseline level, after staining, after bleaching and 1 week after bleaching. The ΔE₀₀ was calculated post bleaching (ΔE₀₀1), after 1-week follow up (ΔE₀₀2) and color changes between 1-week follow up and baseline (ΔE₀₀3). Data were analyzed by paired t-test and ANOVA with a significant difference of P< 0.05.

    RESULTS: Paired t-test showed significant differences in ΔE₀₀1 and ΔE₀₀2 for both stained specimens (P< 0.001). For black coffee stained specimens, Whitelight had significantly higher ΔE₀₀2 compared to the other bleaching agents (P< 0.05). For red wine stain, Whitelight also showed the significantly lowest ΔE₀₀1 (P< 0.001) and the highest ΔE₀₀2 (P< 0.001) compared to other groups. LumiBrite showed the significantly lowest ΔE₀₀3 for red wine stained specimens (P< 0.05). Whitelight had the poorest bleaching efficacy with deterioration effect after 1-week follow up. Opalescence, LumiBrite and strawberry extract had clinically perceptible and comparable bleaching efficacy. Strawberry extract appeared to be a potential natural bleaching agent with a desirable effect.

    CLINICAL SIGNIFICANCE: Commercial tooth bleaching agents can cause several undesirable side effects such as damage to enamel, hypersensitivity and even affecting the pulp. Strawberry extract is a natural, effective bleaching agent that may have reduced side effects.

    Matched MeSH terms: Tooth Bleaching Agents*
  14. Alarami N, Sulaiman E, Al-Haddad A
    Am J Dent, 2017 Aug;30(4):197-200.
    PMID: 29178701
    PURPOSE: To evaluate fracture resistance and failure mode of endodontically-treated mandibular molars restored with different intra-radicular techniques.

    METHODS: 75 human mandibular molars were randomly divided into five equal groups. Teeth were standardized, endodontically-treated and restored according the assigned group as follows: amalgam core only, prefabricated titanium post in the distal canal and amalgam core, composite core only; fiber post in the distal canal and composite core. One group of untreated sound teeth was used as a control. Non-precious metal crowns were fabricated and cemented on the prepared specimens with Rely X U200 resin cement. All specimens were subjected to a compressive load at crosshead speed 0.5 mm/minute, 25° to the long axis of the tooth. Failure loads and modes were recorded.

    RESULTS: Mean failure loads among the groups were significantly different (P= 0.035). Post-hoc multiple pair-wise comparisons revealed the amalgam core and composite core groups produced significantly lower fracture resistance than the control group (P= 0.041 and P= 0.025, respectively) and no significant differences among the different intra-radicular techniques (P> 0.05). The composite core with fiber post and amalgam core with titanium posts showed the highest percentage of favorable failures (67%) and non-favorable failures (87%) respectively.

    CLINICAL SIGNIFICANCE: The composite core with fiber post is the most appropriate intraradicular restoration in cases of severely compromised molars.

    Matched MeSH terms: Tooth Fractures/prevention & control*; Tooth, Nonvital*
  15. Surendran S, Thomas E
    Am J Orthod Dentofacial Orthop, 2014 Jan;145(1):7-14.
    PMID: 24373650 DOI: 10.1016/j.ajodo.2013.09.007
    The objective of this study was to determine whether dental calcification can be used as a first-level diagnostic tool for assessment of skeletal maturity.
    Matched MeSH terms: Tooth Calcification/physiology*; Tooth Root/growth & development; Tooth Root/radiography; Tooth Apex/growth & development; Tooth Apex/radiography; Tooth Crown/growth & development; Tooth Crown/radiography
  16. Sia S, Shibazaki T, Koga Y, Yoshida N
    Am J Orthod Dentofacial Orthop, 2009 Jan;135(1):36-41.
    PMID: 19121498 DOI: 10.1016/j.ajodo.2007.01.034
    This study was designed to determine the optimum vertical height of the retraction force on the power arm that is required for efficient anterior tooth retraction during space closure with sliding mechanics.
    Matched MeSH terms: Tooth Movement/instrumentation; Tooth Movement/methods*; Tooth Root/pathology; Tooth Crown/pathology
  17. Asif MK, Ibrahim N, Sivarajan S, Heng Khiang Teh N, Chek Wey M
    Am J Orthod Dentofacial Orthop, 2020 Oct;158(4):579-586.e1.
    PMID: 32826123 DOI: 10.1016/j.ajodo.2019.09.022
    INTRODUCTION: The study aimed to investigate the effects of micro-osteoperforations (MOPs) on the mandibular bone volume/tissue volume (BV/TV) ratio changes and the rate of orthodontic tooth movement using cone-beam computed tomography images. Another objective was to evaluate the effects of MOP frequency intervals (4 weeks, 8 weeks, and 12 weeks) on the BV/TV ratio and rate of tooth movement.

    METHODS: In 24 participants, 140-200 g of force was applied for mandibular canine retraction. Three MOPs were made according to the scheduled intervals of the 3 different groups: group 1 (MOP 4 weeks), group 2 (MOP 8 weeks), and group 3 (MOP 12 weeks) directly at the mandibular buccal cortical bone of extracted first premolars sites. Cone-beam computed tomography scans were obtained at the 12th week after MOP application. Computed tomography Analyzer software (version 1.11.0.0; Skyscan, Kontich, Belgium) was used to compute the trabecular alveolar BV/TV ratio.

    RESULTS: A significant difference was observed in the rate of canine movement between control and MOP. Paired t test analysis showed a significant difference (P = 0.001) in the mean BV/TV ratio between control and MOP sides in all the frequency intervals groups. However, the difference was significant only in group 1 (P = 0.014). A strong negative correlation (r = -0.86) was observed between the rate of canine tooth movement and the BV/TV ratio at the MOP side for group 1 and all frequency intervals together (r = -0.42).

    CONCLUSIONS: The rate of orthodontic tooth movement can be accelerated by the MOP technique with frequently repeated MOPs throughout the treatment.

    Matched MeSH terms: Tooth Movement*
  18. Wan Hassan WN, Othman SA, Chan CS, Ahmad R, Ali SN, Abd Rohim A
    Am J Orthod Dentofacial Orthop, 2016 Nov;150(5):886-895.
    PMID: 27871715 DOI: 10.1016/j.ajodo.2016.04.021
    INTRODUCTION: In this study we aimed to compare measurements on plaster models using a digital caliper, and on 3-dimensional (3D) digital models, produced using a structured-light scanner, using 3D software.

    METHODS: Fifty digital models were scanned from the same plaster models. Arch and tooth size measurements were made by 2 operators, twice. Calibration was done on 10 sets of models and checked using the Pearson correlation coefficient. Data were analyzed by error variances, repeatability coefficient, repeated-measures analysis of variance, and Bland-Altman plots.

    RESULTS: Error variances ranged between 0.001 and 0.044 mm for the digital caliper method, and between 0.002 and 0.054 mm for the 3D software method. Repeated-measures analysis of variance showed small but statistically significant differences (P <0.05) between the repeated measurements in the arch and buccolingual planes (0.011 and 0.008 mm, respectively). There were no statistically significant differences between methods and between operators. Bland-Altman plots showed that the mean biases were close to zero, and the 95% limits of agreement were within ±0.50 mm. Repeatability coefficients for all measurements were similar.

    CONCLUSIONS: Measurements made on models scanned by the 3D structured-light scanner were in good agreement with those made on conventional plaster models and were, therefore, clinically acceptable.

    Matched MeSH terms: Tooth/anatomy & histology
  19. Sivarajan S, Ringgingon LP, Fayed MMS, Wey MC
    Am J Orthod Dentofacial Orthop, 2020 Mar;157(3):290-304.
    PMID: 32115107 DOI: 10.1016/j.ajodo.2019.10.009
    INTRODUCTION: Minimally invasive micro-osteoperforations (MOPs) look promising for a routine acceleration of orthodontic tooth movement (OTM). The objective of this research was to systematically evaluate evidence regarding the effects of MOPs on the OTM rate, treatment duration, and associated complications.

    METHODS: Electronic database and hand search of English literature in PubMed, Cochrane Central Register of Controlled Trials, Embase, Web of Science, and clinical trial.gov, with author clarification were performed. The selection criteria were randomized controlled trial (RCT) comparing MOPs with conventional treatment involving both extraction and nonextraction. Cochrane's risk of bias tool and Grading of Recommendations Assessment, Development and Evaluation approach were used for quality assessment. Studies were analyzed with chi-square-based Q statistic methods, I2 index, fixed-effects, and random-effects model. Quantitative analysis was done on homogenous studies using Review Manager.

    RESULTS: Eight RCTs were included for the qualitative analysis. Meta-analysis of 2 homogenous studies indicated insignificant effect with MOPs (0.01 mm less OTM; 95% CI, 0.13-0.11; P = 0.83). No difference (P >0.05) was found in anchorage loss, root resorption, gingival recession, and pain.

    CONCLUSIONS: Meta-analysis of 2 low-risk of bias studies showed no effect with single application MOPs over a short observation period; however, the overall evidence was low. The quality of evidence for MOP side effects ranged from high to low. Future studies are suggested to investigate repeated MOPs effect over the entire treatment duration for different models of OTM and its related biological changes.

    TRIAL REGISTRATION NUMBER: PROSPERO CDR42019118642.

    Matched MeSH terms: Tooth Movement*
  20. Wey MC, Salah Fayed MM, Ringgingon LP, Sivarajan S
    Am J Orthod Dentofacial Orthop, 2020 08;158(2):159-160.
    PMID: 32576428 DOI: 10.1016/j.ajodo.2020.04.010
    Matched MeSH terms: Tooth Movement*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links