A high frequency of nonhemolytic hereditary ovalocytosis in Malayan aborigines is thought to result from reduced susceptibility of affected individuals to malaria. Indeed, Kidson et al. recently showed that ovalocytes from Melanesians in Papua New Guinea are resistant to infection in culture by the malarial parasite Plasmodium falciparum. In order to determine if protection against parasitic invasion in these ovalocytes might be the result of some altered membrane material property in these unusual cells, we measured their membrane and cellular deformability characteristics using an ektacytometer . Ovalocytic red cells were found to be much less deformable in comparison to normal discoid red cells. Similar measurements on isolated membrane preparations revealed a marked reduction in ovalocytic membrane deformability. To produce equal deformation of ovalocytic and normal membranes, ovalocytes required an 8-10-fold increase in applied shear stress, indicating that their membrane was capable of deforming under sufficient stress. To test the possibility that this increased membrane rigidity might confer resistance to parasitic invasion, we performed an in vitro invasion assay using Plasmodium falciparum merozoites and Malayan ovalocytes of varying deformability from seven different donors. The level of infection of the ovalocytes ranged from 1% to 35% of that in control cells, and the extent of inhibition appeared to be closely related to the reduction in membrane deformability. Moreover, we were able to induce similar resistance to parasitic invasion in nonovalocytic normal red cells by increasing their membrane rigidity with graded exposure to a protein crosslinking agent. Our findings suggest that resistance to parasite invasion of Malayan ovalocytes is the result of a genetic mutation that causes increased membrane rigidity.
Haematologic abnormalities are found in patients who develop acute ischaemic syndromes including acute myocardial infarction (AMI). A coronary care unit population of 660 consecutive patients were studied for their haematologic parameters on admission. There were 263 patients who had AMI, 207 who had non-infarct acute ischaemic syndromes (CAD), and the other 190 non-coronary patients served as controls. Overall patients with AMI had signijicantly higher haemoglobin (145 ± 2.2 vs 12.9 ± 3.0 g/dl, p<0.0001), haematocrit (45.4 ± 5.8% vs 41.2 ± 8.8%. P < 0.001). red cell count (5.0 ± 0.7 vs 4.5 ± 10^12 p<0.001), but there were no significant differences in their leucocyte count, platelet count or mean corpuscular volume. Patients with CAD had higher haemoglobin and red cell counts (p<0.002, p<0.02 respectively). Although infarct women tended to have lower counts (p<0.001), they still had significantly higher haemoglobin (p<0.01), haematocrit (p<0.02) and red cell count(p<0.002) when compared with controls. Interestingly, there were no ethnic differences at all with regard to haematologic values for infarct patients; haemoglobin, haematocrit, and red count were each significantly higher than controls. Our results suggest that a relatively high baseline Hb, haematocrit or RBC count may be associated with increased likelihood of acute ischaemic syndromes including AMI among Malaysians. Increased viscosity and abnormal haemorheological characteristics may contribute to the development and subsequent outcome of unstable coronary syndromes. Keywords: acute myocardial infarction, coronary artery disease, haemoglobin, haematocrit, haemorheology.
The steady acoustic streaming generated around straight and precurved oscillating ultrasonic files driven by the Piezon-Master 400 unit was examined in the free field and in small channels using a stereomicroscope. In addition, the effect of file-wall contact on streaming production was also investigated. The results indicated that the ultrasonic files can generate acoustic streaming both in the free field and in the small channel. Higher velocity streaming was observed when smaller size files were employed and when the file was precurved. Light file-wall contact did not totally inhibit streaming while severe file-wall contact inhibited movement of the file and, as a result, no streaming was observed. The positions and length scales of the streaming vortices appeared to be influenced by the presence of boundaries. In the free field, two rows of vortices were situated along the sides of the file while in the small channel, the vortices were positioned above the surface of the file. These results indicated that it is possible for acoustic streaming to occur in a confined space as in a root canal provided that severe file-wall contact is avoided. It is therefore recommended that light filing or allowing the file to freely vibrate during some stage of treatment should be carried out in order to generate streaming in the root canal.
The associations between retinal findings and haematological parameters in acute leukaemia are controversial. Sixty-three newly-diagnosed acute leukaemia patients, aged 12-77 years, were studied prospectively for the presence of intra-retinal haemorrhages (IRH), white-centred haemorrhages (WCH), cotton wool spots (CWS) and macular haemorrhages (MH), Thirty-three patients (52.4%) showed at least one retinal abnormality. The prevalence of individual findings was: IRH (30 cases), WCH (20 cases), CWS (5 cases), MH (11 cases). In contrast to previous studies, there was no association between any of these retinal findings and the haemoglobin level or the platelet count. There was a higher median WBC in patients with IRH (68 x 10(9)/l) than in those without IRH (15.4 x 10(9)/l), P = 0.037. When the acute myeloblastic leukaemia cases were considered separately, an association was also found between higher WBC and the presence of WCH and CWS. There was no association between retinal findings and FAB type in the AML cases. We conclude that a high WBC may be at least as important as anaemia and thrombocytopenia in the pathogenesis of the retinopathy of acute leukaemia.
Controlled release buccal patches were fabricated using Eudragit NE40D and studied. Various bioadhesive polymers, namely hydroxypropylmethyl cellulose, sodium carboxymethyl cellulose and Carbopol of different grades, were incorporated into the patches, to modify their bioadhesive properties as well as the rate of drug release, using metoprolol tartrate as the model drug. The in-vitro drug release was determined using the USP 23 dissolution test apparatus 5 with slight modification, while the bioadhesive properties were evaluated using texture analyzer equipment with chicken pouch as the model tissue. The incorporation of hydrophilic polymers was found to affect the drug release as well as enhance the bioadhesiveness. Although high viscosity polymers can enhance the bioadhesiveness of the patches, they also tend to cause non-homogeneous distribution of the polymers and drug, resulting in non-predictable drug-release rates. Of the various bioadhesive polymers studied, Cekol 700 appeared to be most satisfactory in terms of modifying the drug release and enhancement of the bioadhesive properties.
High-energy electron (2.0 MV) and gamma irradiation (60Co) has been used to modify polymeric silicone fluids of initial viscosities in the range, 90-700 cSt. Doses of electron and gamma radiation were delivered at rates of 0.246 kGy s(-1) and 15 kGy h(-1), respectively, exposure times being adjusted to ensure energy deposition in the range 30-360 kGy. Measurements were made using a differential viscometer based on a Bose Institute design. In line with expectation, samples of greater initial molecular weight (and hence greater viscosity), were observed to be more susceptible to radiation induced cross-linking than those of lower molecular weight. The role of dose rate and oxygen diffusion in determining the extent of change is discussed.
Natural rubber from hevea brasiliensis trees (Thailand, RRIM 600 clone) of different age (8, 20, and 35 years) were characterized by size exclusion chromatography coupled with online viscometry according to their distribution of molar mass and branching index at a temperature of 70 degrees C using cyclohexane as solvent. Washing with an aqueous solution of sodium dodecylsulfate and subsequent saponification purified the natural rubber samples. With this procedure physical branching points caused by phospholipids, proteins and hydrophobic terminal units, mainly fatty acids, of the natural rubber (cis-1,4-polyisoprene) molecule, could be removed leading to completely soluble polymer samples. All samples investigated possess a very broad (10 to 50,000 kg/mol) and distinct bimodal molar mass distribution. With increasing age the peak area in the low molar mass region decreases favoring the peak area in the high molar mass region. By plotting the branching index as a function of the both, the molar mass and the age of the trees.
Various palm oil (RBD Palm Olein) based urethane acrylate prepolymers (UPs) having different structures and molecular weights were synthesised from palm oil based polyols, diisocyanate compounds and hydroxyl terminated acrylate monomers by following established synthesis procedures described elsewhere. The products (UPs) were compared with each other in terms of their molecular weights (MW), viscosities and UV curing performances of pressure sensitive adhesives (PSA) UP based formulations. The molecular structure of diisocyanate compounds and hydroxyl acrylate monomers tend to determine the molecular weights and hence viscosities of the final products of urethane acrylate prepolymers (UP), whereas, the MW of the UP has no direct effects on the coatings and adhesive properties of UV curable UP based PSA.
This study comprised of physicochemical characterizations of starch extracted from Msp94 sweet potato tuber and production of high fructose glucose syrup from the starch. Msp94 sweet potato starch consisted of 7.3% water, 0.2% protein, 0.4% fat, 1.3% total ash, 94.8% total carbohydrates, 83.0% starch and 20.6% apparent amylose. The starch granules were spherical, polygonal and irregular in shapes with the size of 13-14 mm. Enzymatic hydrolysis of Msp94 sweet potato starch for 24,48, 72 hours, using a mixture of amyglucosidase-pullulanase enzymes during saccharification process, produced starch hydrolysates with dextrose equivalent (DE) of 94.8, 99.1, 99.3 respectively. This is followed by reduction in viscosity of the starch hydrolysates. Conversion of the Msp94 starch to percent of glucose after hydrolysing for 24,48 and 72 hours were 97.1%, 109.5% and 103.2%, respectively. Msp94 starch hydrolysates was then purified using three types of ion exchange resins and isomerized to highfructose syrup using glucose isomerase enzyme (Sweetzyme T). Thefructose content in isomerized Msp94 syrup was (43.8-46.5%) was comparable to the fructose content (44%) in commercial High Fructose Corn Syrup (HFCS) 42.
[Kajian ini merangkumi pencirian fizikokimia kanji yang diekstrak daripada ubi keledek Msp94 dan penghasilan sirap glukosa berfruktosa tinggi daripada kanji ini. Kanji ubi keledek Msp94 mengandungi 7.3% air, 0.2% protein, 0.4% lemak, 1.3% abu total, 94.8% karbohidrat total, 83.0% kanji dan 20.6% amilosa ketara. Purata saiz granul kanji adalah 13-14 mm, berbentuk bulat, poligon dan bentuk yang tidak tetap. Hidrolisis berenzim menggunakan gabungan enzim glukoamilase-pululanase dalam proses sakarifikasi, yang dijalankan ke atas kanji ubi keledek Msp94 selama 24, 48, 72 jam menghasilkan hidrolisat kanji dengan setaraan dekstrosa (DE) masing-masing pada 94.8, 99.1, 99.3. 1ni diikuti dengan kelikatan hidrolisat kanji yang semakin menurun. Penukaran kanji Msp94 kepada peratus glukosa adalah sebanyak 97.1 %, 109.5% dan 103.2% setelah dihidrolisis selama 24,48 dan 72 jam. Hidrolisat kanji Msp94 ditulenkan menggunakan tiga jenis resin penukar ion dan diisomer kepada sirap berfruktosa tinggi menggunakan enzim glukosa isomerase (Sweetzyme T). Kandungan fruktosa (43.8-46.5%) dalam sirap Msp94 yang telah diisomer adalah setara dengan kandunganfruktosa (44%) dalam sirap komersial, High Fructose Corn Syrup (HFCS) 42].
Moringa oleifera is a plant whose seeds have coagulation properties for treating water and wastewater. In this study the coagulation efficiency of Moringa oleifera kept in different storage conditions were studied. The Moringa oleifera seeds were stored at different conditions and durations; open container and closed container at room temperature (28 degrees C) and refrigerator (3 degrees C) for durations of 1, 3 and 5 months. Comparison between turbidity removal efficiency of Moringa oleifera kept in refrigerator and room temperature revealed that there was no significant difference between them. The Moringa oleifera kept in refrigerator and room temperature for one month showed higher turbidity removal efficiency, compared to those kept for 3 and 5 months, at both containers. The coagulation efficiency of Moringa oleifera was found to be dependent on initial turbidity of water samples. Highest turbidity removals were obtained for water with very high initial turbidity. In summary coagulation efficiency of Moringa oleifera was found independent of storage temperature and container, however coagulation efficiency of Moringa oleifera decreased as storage duration increased. In addition, Moringa oleifera can be used as a potential coagulant especially for very high turbidity water.
The objective of this study was to evaluate the effects of salivary testing in dental caries assessment. The role of saliva flow rate, pH, viscosity and buffering capacity in subjects with high caries (DMFT>5) (group 1) against subjects with low caries (DMFT=0) (control group) were evaluated. 40 subjects between the age of 18 and 40 years old were selected (20 subjects control group and 20 subjects group 1). By using a salivary testing kit (GC Asia Dental Pte Ltd, Japan), each subject underwent test such as hydration status of the oral mucosa, viscosity and pH of resting saliva, stimulated salivary flow rate and buffering capacity of stimulated saliva. The results showed that the flow rate, viscosity, pH and buffering capacity of saliva in subjects of group 1 (DMFT>5) was significantly lower (p
This study was carried out to determine the physicochemical properties of carboxymethyl cellulose (CMC) derived from cellulose of palm oil empty fruit bunch (EFB) and its use asa film-coating agent. Samples were prepared at various concentrations and then their physicochemical properties were studied including the viscosity, pH, tensile strength of films, surface properties of the films and dissolution studies on coated tablets. CMC EFB showed lower viscosity than commercial CMC product at the concentration of 1%, 2% and 3% with the values of 44.0cp, 299.9cp, 358.9cp and 90.0cp, 689.9cp, 5569.0cp respectively. The tensile strength of the films for CMC EFB were 7.85MPa, 14.79MPa, 10.36MPa while the commercial CMC exhibited higher values of 21.72MPa, 35.14MPa and 26.9MPa at similar concentration. The scanning electron microscope showed different surface properties of the films for both of them where the commercial CMC is smoother in texture and very transparent unlike its counterpart. However, dissolution studies on paracetamol tablets coated using the samples showed no significant difference (p>0.05) in drug release profile between the two materials. Hence, CMC EFB has a greater potential to be developed as a competitive tablet-coating agent despite the differences in its physicochemical properties.
Effects of phosphorus content (510 to 987 ppm) on the gelatinization and retrogradation of 6 potato cultivars (Benimaru, Hokkaikogane, Irish Cobbler, Konafubuki, Sakurafubuki, and Touya) were studied. Pasting properties were analyzed by RVA, thermal properties by DSC, and mechanical properties of the starch gels by TA. Phosphorus was positively correlated with swelling power (r= 0.84) and negatively correlated with solubility (r= 0.83). Phosphorus content showed significant effect on certain pasting properties of potato starch such as peak viscosity, breakdown, and setback. Phosphorus content showed a significant positive correlation with peak viscosity (r= 0.95) and breakdown (r= 0.90). Increasing concentration of phosphorus tends to decrease the setback. Phosphorus content had no influence on thermal properties and mechanical properties of potato starch gel.
The possible relationships between the main emulsion components (namely, Arabic gum, xanthan gum, and orange oil) and the physicochemical properties of orange beverage emulsion were evaluated by using response surface methodology. The physicochemical emulsion property variables considered as response variables were emulsion stability, viscosity, fluid behavior, zeta-potential, and electrophoretic mobility. The independent variables had the most and least significant ( p < 0.05) effect on viscosity and zeta-potential, respectively. The quadratic effect of orange oil and Arabic gum, the interaction effect of Arabic gum and xanthan gum, and the main effect of Arabic gum were the most significant ( p < 0.05) effects on turbidity loss rate, viscosity, viscosity ratio, and mobility, respectively. The main effect of Arabic gum was found to be significant ( p < 0.05) in all response variables except for turbidity loss rate. The nonlinear regression equations were significantly ( p < 0.05) fitted for all response variables with high R (2) values (>0.86), which had no indication of lack of fit. The results indicated that a combined level of 10.78% (w/w) Arabic gum, 0.56% (w/w) xanthan gum, and 15.27% (w/w) orange oil was predicted to provide the overall optimum region in terms of physicochemical properties studied. No significant ( p > 0.05) difference between the experimental and the predicted values confirmed the adequacy of response surface equations.
Extensive studies have been carried out on the effect of temperature and salt concentration on the theological behavior of whey proteins and different starches individually, but not on mixed dispersions of whey protein isolates and starches. In the present studies, the rheological behavior of cross-linked waxy maize starch and whey protein isolate mixed dispersions during heating at 60-85 degrees C was investigated. Further, the effect of CaCl2 (25-100 mM ionic strengths) on the gelatinization of these dispersions was determined. It was found that at a 2:3 ratio and a 3:2 ratio of cross-linked waxy maize starch to whey protein isolate mixed gels form a compatible networkmM concentration the solution viscosity was higher.
The present study is an attempt to formulate a controlled-release matrix tablet formulation for alfuzosin hydrochloride by using low viscous hydroxy propyl methyl cellulose (HPMC K-100 and HPMC 15cps) and its comparison with marketed product. Different batches of tablets containing 10 mg of alfuzosin were prepared by direct compression technique and evaluated for their physical properties, drug content, and in vitro drug release. All the formulations had a good physical integrity, and the drug content between the batches did not vary by more than 1%. Drug release from the matrix tablets was carried out for 12 hr and showed that the release rate was not highly significant with different ratios of HPMC K-100 and HPMC15cps. Similar dissolution profiles were observed between formulation F3 and the marketed product throughout the study period. The calculated regression coefficients showed a higher r2 value with zero-order kinetics and Higuchi model in all the cases. Although both the models could be applicable, zero-order kinetics seems to be better. Hence, it can be concluded that the use of low viscous hydrophilic polymer of different grades (HPMC K-100 and HPMC 15cps) can control the alfuzosin release for a period of 12 hr and was comparable to the marketed product.
Lipase-catalyzed production of palm esters by alcoholysis of palm oil with oleyl alcohol in n-hexane was performed in 2L stirred-tank reactor (STR). Investigation on the performance of reactor operation was carried out in batch mode STR with single impeller mounted on the centrally located shaft. Rushton turbine (RT) impellers provide the highest reaction yield (95.8%) at lower agitation speed as compared to AL-hydrofoil (AL-H) and 2-bladed elephant ear (EE) impellers. Homogenous enzyme particles suspension was obtained at 250 rpm by using RT impeller. At higher impeller speed, the shear effect on the enzyme particles caused by agitation has decreased the reaction performance. Palm esters reaction mixture in STR follows Newtons' law due to the linear relation between the shear stress (tau) and shear rate (dupsilon/dy). High stability of Lipozyme RM IM was observed as shown by its ability to be repeatedly used to give high percentage yield (79%) of palm esters even after 15 cycles of reaction. The process was successfully scale-up to 75 L STR (50 L working volume) based on a constant impeller tip speed approach, which gave the yield of 97.2% after 5h reaction time.