Displaying publications 1 - 20 of 92 in total

Abstract:
Sort:
  1. Abu Bakar, M.A., Ahmad, S., Kuntjoro, W.
    MyJurnal
    Kenaf fibre that is known as Hibiscus cannabinus, L. family Malvaceae is an herbaceous plant that can be grown under a wide range of weather conditions. The uses of kenaf fibres as a reinforcement material in the polymeric matrix have been widely investigated. It is known that epoxy has a disadvantage of brittleness and exhibits low toughness. In this research, liquid epoxidized natural rubber (LENR) was introduced to the epoxy to increase its toughness. Kenaf fibres, with five different fibre loadings of 5%, 10%, 15%, 20% and 25% by weight, were used to reinforce the epoxy resins (with and without addition of epoxidized natural rubber) as the matrices. The flexural strength, flexural modulus and fracture toughness of the rubber toughened epoxy reinforced kenaf fibre composites were investigated. The results showed that the addition of liquid epoxidized natural rubber (LENR) had improved the flexural modulus, flexural strength and fracture toughness by 48%, 30%, and 1.15% respectively at 20% fibre loading. The fractured surfaces of these composites were investigated by using scanning electron microscopic (SEM) technique to determine the interfacial bonding between the matrix and the fibre reinforcement.
    Matched MeSH terms: Body Weights and Measures
  2. Ademola James, Rohani JM, Olusegun AG, Rani MR
    Work, 2014;47(2):173-81.
    PMID: 23324693 DOI: 10.3233/WOR-121530
    OBJECTIVE: The unavailability of anthropometric data especially in developing countries has remained a limiting factor towards the design of learning facilities with sufficient ergonomic consideration. Attempts to use anthropometric data from developed countries have led to provision of school facilities unfit for the users. The purpose of this paper is to use factor analysis to investigate the suitability of the collected anthropometric data as a database for school design in Nigerian tertiary institutions.
    PARTICIPANTS: Anthropometric data were collected from 288 male students in a Federal Polytechnic in North-West of Nigeria. Their age is between 18-25 years.
    METHODS: Nine vertical anthropometric dimensions related to heights were collected using the conventional traditional equipment. Exploratory factor analysis was used to categorize the variables into a model consisting of two factors. Thereafter, confirmatory factor analysis was used to investigate the fit of the data to the proposed model.
    RESULTS: A just identified model, made of two factors, each with three variables was developed. The variables within the model accounted for 81% of the total variation of the entire data. The model was found to demonstrate adequate validity and reliability. Various measuring indices were used to verify that the model fits the data properly. The final model reveals that stature height and eye height sitting were the most stable variables for designs that have to do with standing and sitting construct.
    CONCLUSION: The study has shown the application of factor analysis in anthropometric data analysis. The study highlighted the relevance of these statistical tools to investigate variability among anthropometric data involving diverse population, which has not been widely used for analyzing previous anthropometric data. The collected data is therefore suitable for use while designing for Nigerian students.
    KEYWORDS: Exploratory factor analysis; measurement model; school ergonomics
    Matched MeSH terms: Body Weights and Measures*
  3. Ahmad Kamil Arshad, Khairil Azman Masri, Juraidah Ahmad, Mohamad Saifullah Samsudin
    MyJurnal
    This paper presents the outcome of a laboratory investigation on mix design, resilient modulus, moisture susceptibility and rutting resistance of Stone Mastic Asphalt (SMA) and Dense Graded Asphalt (AC) that is incorporated with Nanosilica (NS) modified binder. Penetration Grade 60-70 (PEN60-70) types of binder were mixed with nanoparticles (NS) using concentration of 0wt%, 2wt%, 4wt% and 6wt% by weight of asphalt binder. The mixtures were tested for resilient modulus, indirect tensile strength and rutting, in order to evaluate the performance of NS-SMA and NS-AC. The results show that the existence of NS is capable of enhancing the performance of both asphalt mixtures, and the addition of NS decreases the susceptibility of moisture damage and provides better resistance against permanent deformation. Furthermore, the addition of 4wt% NS appears to be the most effective amount for the performance enhancement in AC and SMA mixtures.
    Matched MeSH terms: Body Weights and Measures
  4. Ahmad, M.H., Norzaie, J., Al Qbadi, F., Daniel, B.D.
    ASM Science Journal, 2009;3(1):17-26.
    MyJurnal
    The functions of dams are for water supply, flood control and hydroelectric power generation. A concrete faced rockfill dam (CFRD) is preferred by dam consultants due to its many advantages. It is designed to withstand all applied loads, namely gravity load due to its massive weight and hydrostatic load due to water thrust from the reservoir. The structural response of the Bakun CFRD which is the second highest dam in the world after the Shuibuya Dam, was analyzed using finite element method. A two-dimensional plane strain finite element analysis of the non-linear Duncan-Chang hyperbolic model was used in the study of the dam in respect to the deformation and stresses of the main dam of Bakun CFRD project. The Dead-Birth-Ghost element technique was used to simulate sequences of the construction of the dam. The comparison of rigid and flexible foundation on the behaviour of the dam is discussed in this study. In the finite element modeling, the concrete slab on the upstream was represented through a six-noded element, while the interface characteristic between the dam body and the concrete slab was modeled using an interface element. The maximum settlement and stresses of the cross-section were found and their distribution was discussed and tabulated in the form of contours. The effect of reservoir filling loading had a gradual effect on the dam response behaviour. Comparisons with no water impoundment in the dam were also discussed.
    Matched MeSH terms: Body Weights and Measures
  5. Al-Mekhlafi MS, Surin J, Atiya AS, Ariffin WA, Mahdy AK, Abdullah HC
    PMID: 19058591
    A cross-sectional study was carried out to determine the current prevalence of protein-energy malnutrition (PEM) among Orang Asli schoolchildren and to investigate the potential predictors of malnutrition. A total of 241 (120 males and 121 females) Orang Asli schoolchildren age 7-12 years living in remote areas of Pos Betau, Pahang participated voluntarily in this study. Anthropometric and socioeconomic data were collected and the children were screened for intestinal parasitic infections. The overall prevalences of mild and significant underweight conditions were 52.3% and 37.3%, respectively, and the prevalences of mild stunting and wasting were 43.6% and 43.1%, respectively, while the prevalences of significant stunting and wasting were 43.6% and 5.6%, respectively. There was a significant association between gender (male) and malnutrition (p = 0.029). The results also showed a higher prevalence of stunting among children age < or = 10 years than in older children (p = 0.001). Other independent variables, including socioeconomic status and intestinal parasitic infections, had no significant associations with malnutrition indices. PEM is prevalent among schoolchildren in rural Malaysia and therefore of public health concern since PEM diminishes immune function and impairs cognitive function and educational performance. School-based programs of prevention through health education and interventions should be considered as an essential part of measures to improve the quality of life of schoolchildren in rural Malaysia.
    Matched MeSH terms: Body Weights and Measures/statistics & numerical data
  6. Algamal ZY, Lee MH
    Comput Biol Med, 2015 Dec 1;67:136-45.
    PMID: 26520484 DOI: 10.1016/j.compbiomed.2015.10.008
    Cancer classification and gene selection in high-dimensional data have been popular research topics in genetics and molecular biology. Recently, adaptive regularized logistic regression using the elastic net regularization, which is called the adaptive elastic net, has been successfully applied in high-dimensional cancer classification to tackle both estimating the gene coefficients and performing gene selection simultaneously. The adaptive elastic net originally used elastic net estimates as the initial weight, however, using this weight may not be preferable for certain reasons: First, the elastic net estimator is biased in selecting genes. Second, it does not perform well when the pairwise correlations between variables are not high. Adjusted adaptive regularized logistic regression (AAElastic) is proposed to address these issues and encourage grouping effects simultaneously. The real data results indicate that AAElastic is significantly consistent in selecting genes compared to the other three competitor regularization methods. Additionally, the classification performance of AAElastic is comparable to the adaptive elastic net and better than other regularization methods. Thus, we can conclude that AAElastic is a reliable adaptive regularized logistic regression method in the field of high-dimensional cancer classification.
    Matched MeSH terms: Body Weights and Measures
  7. Amir Bahram Kashiani, Kim, Geok Soh, Kim, Lam Soh, Swee, Leong Ong, Kittichottipanich, Boonsrin
    Movement Health & Exercise, 2020;9(1):45-66.
    MyJurnal
    Several studies have shown a positive association between variable resistance training (VRT) and improvements in muscular performance. However, the effects of VRT on body composition among untrained individuals remain unclear. The objective of this study was to examine the comparison between of methods of VRT on body composition, muscular strength and functional capacity among untrained male adults. Fifty healthy untrained males (age: 21.5 ± 1.95 years) were selected randomly and assigned into three groups: combined weight and chain (WC), combined weight and elastic band (WE), and free-weight (CG). All three groups completed 12 weeks of high intensity resistance training (70-80% of one-repetition maximum) with three sets of 8-12 repetitions two times per week. Approximately 65% of the whole resistance was provided by free-weights, while the other 35% of the resistance was provided by chains and elastic bands for the WC and WE groups, respectively. Dependent variables including body composition, muscular strength and functional capacity using bioelectrical impedance analyzer, one-repetition maximum and maximum repetitions to muscular fatigue were measured, respectively in pre-test, post-test 1 (week 6) and post-test 2. Significance level was set at P < 0.05. No differences existed among all groups at baseline for depended variables. A mixed model ANOVA with repeated measurements analysis revealed that although there were not significant differences in body composition among the groups (P > 0.05), all groups showed a significant reduction in fat mass and significant increase in fat-free mass during and after the intervention (P = 0.0001), and these differences were insignificantly greater in WE and WC groups compared with CG group. Furthermore, all three groups showed significant improvements in muscular strength and functional capacity during and after intervention (P = 0.0001), and muscular strength and functional capacity were greater in WE and WC groups compared with the CG group, but there were not significant differences in muscular strength and functional capacity between WE and WC groups. However, the WE group showed insignificantly more improvement in muscular strength and functional capacity compared with the WC group during and after the intervention. The results of this study show that VRT has a slightly better effect than free-weight to improve body composition during and after 12 weeks intervention. Also, WE training had a slightly better effect than WC training in improving muscular strength and functional capacity during and after 12 weeks of VRT among untrained male adults.
    Matched MeSH terms: Body Weights and Measures
  8. Arigbabu OA, Ahmad SM, Adnan WA, Yussof S, Iranmanesh V, Malallah FL
    ScientificWorldJournal, 2014;2014:460973.
    PMID: 25121120 DOI: 10.1155/2014/460973
    Soft biometrics can be used as a prescreening filter, either by using single trait or by combining several traits to aid the performance of recognition systems in an unobtrusive way. In many practical visual surveillance scenarios, facial information becomes difficult to be effectively constructed due to several varying challenges. However, from distance the visual appearance of an object can be efficiently inferred, thereby providing the possibility of estimating body related information. This paper presents an approach for estimating body related soft biometrics; specifically we propose a new approach based on body measurement and artificial neural network for predicting body weight of subjects and incorporate the existing technique on single view metrology for height estimation in videos with low frame rate. Our evaluation on 1120 frame sets of 80 subjects from a newly compiled dataset shows that the mentioned soft biometric information of human subjects can be adequately predicted from set of frames.
    Matched MeSH terms: Body Weights and Measures/methods*
  9. Awang M, Sulaiman AR, Munajat I, Fazliq ME
    Malays J Med Sci, 2014 Mar;21(2):40-3.
    PMID: 24876806 MyJurnal
    The objectives of this study were to investigate whether severity of clubfoot, age, and weight of the patients at initial manipulation and casting influence the total number of castings required.
    Matched MeSH terms: Body Weights and Measures
  10. Azlan A, Nasir NN, Shamsudin N, Rahman HA, Khoo HE, Razman MR
    BMC Public Health, 2015;15:683.
    PMID: 26194098 DOI: 10.1186/s12889-015-2044-3
    Exposure to PCDD/PCDF (dioxin and furan) through consumption of fish and shellfish is closely related to the occurrence of skin diseases, such as chloracne and hyperpigmentation. This study aimed to determine the exposure of PCDD/PCDF and its congeners in fish and shellfish obtained from different regions of the Straits of Malacca among the fishing community.
    Matched MeSH terms: Body Weights and Measures
  11. B. Mabel Manjaji Matsumoto, Muhammad Ali Syed Hussein, Yee, Jean-Chai
    MyJurnal
    The central and north west coast of Sabah lies along the western extremity of the Coral Triangle, within which are situated several marine protected areas (MPAs). In the present study we determined in situ coral reef fish populations in several localities along the west coast of Sabah, by exploring species abundance, richness and diversity of ten economically important fish species. The underwater surveys were conducted from May to December 2015. During this eight- month period, surveys at each site were undertaken once every two months. Dives were conducted during the daylight hours. A total of 171 individuals from the targeted fish species were enumerated from the 349 still images and 220 minutes of video footage. Abundance was observed mainly in the semi-protected MPA (n=110) with only one fish species recorded with more than 2 individuals at protected MPA and unprotected sites. We observed a correlation between fish species richness and coral topographic complexity, with study sites at the semi-protected MPA having the most complex topography landscape, and accordingly recording the highest Shannon-Wiener index (H= 2.85). Higher abundance recorded at study sites in the unprotected sites and semi-protected MPA indicate that such areas could potentially become de facto MPAs. A long-term monitoring, assessment and evaluation of the multiple degrees of variables involved such as length-weight relationship, type of habitat, variation in depth, and species behaviour are recommended in order to understand better the relationship and dynamics between these variables.
    Matched MeSH terms: Body Weights and Measures
  12. Bakr ZH, Wali Q, Ismail J, Elumalai NK, Uddin A, Jose R
    Data Brief, 2018 Jun;18:860-863.
    PMID: 29900250 DOI: 10.1016/j.dib.2018.03.110
    In this data article, we provide energy dispersive X-ray spectroscopy (EDX) spectra of the electrospun composite (SnO2-TiO2) nanowires with the elemental values measured in atomic and weight%. The linear sweep voltammetry data of composite and its component nanofibers are provided. The data collected in this article is directly related to our research article "Synergistic combination of electronic and electrical properties of SnO2 and TiO2 in a single SnO2-TiO2 composite nanowire for dye-sensitized solar cells" [1].
    Matched MeSH terms: Body Weights and Measures
  13. Billa N, Yuen KH
    AAPS PharmSciTech, 2000;1(4):E30.
    PMID: 14727895
    The purpose of this research was to study processing variables at the laboratory and pilot scales that can affect hydration rates of xanthan gum matrices containing diclofenac sodium and the rate of drug release. Tablets from the laboratory scale and pilot scale proceedings were made by wet granulation. Swelling indices of xanthan gum formulations prepared with different amounts of water were measured in water under a magnifying lens. Granules were thermally treated in an oven at 60 degrees C, 70 degrees C, and 80 degrees C to study the effects of elevated temperatures on drug release from xanthan gum matrices. Granules from the pilot scale formulations were bulkier compared to their laboratory scale counterparts, resulting in more porous, softer tablets. Drug release was linear from xanthan gum matrices prepared at the laboratory scale and pilot scales; however, release was faster from the pilot scales. Thermal treatment of the granules did not affect the swelling index and rate of drug release from tablets in both the pilot and laboratory scale proceedings. On the other hand, the release from both proceedings was affected by the amount of water used for granulation and the speed of the impeller during granulation. The data suggest that processing variables that affect the degree of wetness during granulation, such as increase in impeller speed and increase in amount of water used for granulation, also may affect the swelling index of xanthan gum matrices and therefore the rate of drug release.
    Matched MeSH terms: Weights and Measures/standards
  14. Cartland SP, Harith HH, Genner SW, Dang L, Cogger VC, Vellozzi M, et al.
    Sci Rep, 2017 05 15;7(1):1898.
    PMID: 28507343 DOI: 10.1038/s41598-017-01721-4
    Non-alcoholic fatty liver disease (NAFLD) incorporates steatosis, non-alcoholic steato-hepatitis (NASH) and liver cirrhosis, associating with diabetes and cardiovascular disease (CVD). TNF-related apoptosis-inducing ligand (TRAIL) is protective of CVD. We aimed to determine whether TRAIL protects against insulin resistance, NAFLD and vascular injury. Twelve-week high fat diet (HFD)-fed Trail -/- mice had increased plasma cholesterol, insulin and glucose compared to wildtype. Insulin tolerance was impaired with TRAIL-deletion, with reduced p-Akt, GLUT4 expression and glucose uptake in skeletal muscle. Hepatic triglyceride content, inflammation and fibrosis were increased with TRAIL-deletion, with elevated expression of genes regulating lipogenesis and gluconeogenesis. Moreover, Trail -/- mice exhibited reduced aortic vasorelaxation, impaired insulin signaling, and >20-fold increased mRNA expression for IL-1β, IL-6, and TNF-α. In vitro, palmitate treatment of hepatocytes increased lipid accumulation, inflammation and fibrosis, with TRAIL mRNA significantly reduced. TRAIL administration inhibited palmitate-induced hepatocyte lipid uptake. Finally, patients with NASH had significantly reduced plasma TRAIL compared to control, simple steatosis or obese individuals. These findings suggest that TRAIL protects against insulin resistance, NAFLD and vascular inflammation. Increasing TRAIL levels may be an attractive therapeutic strategy, to reduce features of diabetes, as well as liver and vascular injury, so commonly observed in individuals with NAFLD.
    Matched MeSH terms: Body Weights and Measures
  15. Cheah WL, Lee PY, Chang CT, Mohamed HJ, Wong SL
    PMID: 23691641
    Although the association between non-alcoholic fatty liver disease (NAFLD) and metabolic syndrome has been previously firmly established, the prevalence of NAFLD and its risk factors in rural communities remains incompletely defined. This study aimed to determine the prevalence and factors associated with ultrasound-diagnosed NAFLD amongst a rural community in Sarawak. An indigenous village was randomly selected where all adults aged 21 years and above underwent an abdominal ultrasound, biochemical tests and an anthropometric assessment. Respondents with a score > or =8 on an alcohol-use disorders-identification test (AUDIT) indicating harmful or hazardous drinking were excluded. Seventy-seven respondents (46.8% male, mean age 48.4 SD 16.64), met inclusion criteria. The prevalence of ultrasound diagnosed NAFLD was 44.2% (n=34), among them 52.9% had moderate NAFLD. There were no significant age or gender differences between respondents with and without NAFLD, although those with NAFLD were older. Respondents with NAFLD had a significantly higher BMI t,han those without NAFLD (p<0.001). Both male and female respondents with NAFLD had a significantly higher waist circumference than those without NAFLD (p<0.001). Prevalence of diabetes, hypertension, hyperglycemia and hypertriglyceridemia were significantly higher among those with NAFLD. However, there were no significant differences in terms of percentage of unhealthy body fat and muscle, and serum HDL levels. Risk factors independently associated with NAFLD included male gender (odd ratio 0.06; 95% CI 0.008-0.523) and waist circumference (odd ratio 1.2; 95% CI 1.036-1.421). There was a high prevalence of NAFLD and the presence of more severe stages of disease in this indigenous population. Life-style related diseases, such as fatty liver disease, can occur in rural as well as urban populations.
    Matched MeSH terms: Body Weights and Measures
  16. Chin KY, Nirwana SI, Ngah WZ
    Clin Interv Aging, 2015;10:1377-80.
    PMID: 26346636 DOI: 10.2147/CIA.S90233
    Previous reports of patients undergoing parathyroidectomy and of patients receiving teriparatide as antiosteoporotic treatment have suggested a plausible relationship between parathyroid hormone (PTH) and uric acid. However, similar data at population level were lacking. The current study aimed to determine the relationship between PTH and uric acid in a group of apparently healthy Malaysian men.
    Matched MeSH terms: Body Weights and Measures
  17. Chua CS, Huang SY, Cheng CW, Bai CH, Hsu CY, Chiu HW, et al.
    Medicine (Baltimore), 2017 Dec;96(49):e9094.
    PMID: 29245334 DOI: 10.1097/MD.0000000000009094
    Abdominal pain is one of the key symptoms of irritable bowel syndrome (IBS). Studies have indicated an increase in the incidence of IBS in Asia. However, yet the pathophysiology of this disease remains unknown. Women are more likely to develop the condition than men, especially the constipation-predominant type. Essential fatty acid (EFA) malnutrition is one of several theories discussing the mechanism of IBS.The authors hypothesized that significant EFA deficiency may cause abdominal pain in patients with IBS. However, because patterns in the oral intake of EFAs differ between cultures, the authors narrowed this study to examine the nutritional status of Asian female patients with IBSThe authors investigated Asian female patients with IBS and compared them with a group of healthy controls. Thirty patients with IBS and 39 healthy individuals were included in this study. The participants' age, height, weight, and waist size were recorded. The 24-item Hamilton Depression Rating Scale was documented. Both erythrocyte and plasma fatty acid content were analyzed through gas-liquid chromatography.The authors found that patients with IBS exhibited significantly higher scores for depression, higher proportions of plasma saturated fatty acids and monounsaturated fatty acids, and lower proportions of docosahexaenoic acid and total omega-3 polyunsaturated fatty acids in plasma are associated with IBS in Asian female patients. Further study is indicated to confirm the causality of this association.
    Matched MeSH terms: Body Weights and Measures
  18. Dahlia Lema, A.M., Kartini, K., Dyg. Siti Quraisyah, A.A., Anthony, A.D., Nuraini, T., Siti Rahimah, R.
    MyJurnal
    Sludge is an unavoidable product of wastewater treatment that creates problems of disposal. Increasingly, strict environmental control regulations have resulted in limitations on sludge disposal options.Disposal by incineration has been found to be a good option. In this research, application of domestic waste sludge powder (DWSP) was used as cement replacement in concrete mix. This study utilised replacement of 3 %, 5 %, 7 %, 10 % and 15 % by weight of OPC with water binder (w/b) ratio of 0.60, 0.55 and 0.40 for Grade 30, Grade 40 and Grade 50 respectively. The performance of DWSP concrete in terms of its compressive strength, water absorption, water permeability and Rapid Chloride Ion penetration were investigated. All values of compressive strength for DWSP concrete were lower compared to the OPC control, and the strength decreased as the percentage of replacement with DWSP increased for Grade 30 and Grade 50, except for Grade 40 at replacement of 7 %. Meanwhile, water absorption and water permeability for the DWSP concrete increased as the replacement increased. Overall, with further research in producing quality DWSP, the potential of using this waste as a cement replacement material is very promising.
    Matched MeSH terms: Body Weights and Measures
  19. Danish M, Kale P, Ahmad T, Ayoub M, Geremew B, Adeloju S
    Data Brief, 2020 Apr;29:105225.
    PMID: 32154335 DOI: 10.1016/j.dib.2020.105225
    The dataset presented here are part of the data planned to produce biodiesel from flaxseed. Biodiesel production from flaxseed oil through transesterification process using KOH as catalyst, and the operating parameters were optimized with the help of face-centered central composite design (FCCD) of response surface methodology (RSM). The operating independent variables selected such as, methanol oil ratio (4:1 to 6:1), catalyst (KOH) weight (0.40-1.0%), temperature (35 °C-65 °C), and reaction time (30 min-60 min) were optimized against biodiesel yield as response. The maximum yield (98.6%) of biodiesel from flaxseed can achieved at optimum methanol oil ratio (5.9:1), catalyst (KOH) weight (0.51%), reaction temperature (59.2 °C), and reaction time (33 min). The statistical significance of the data set was tested through the analysis of variance (ANOVA). These data were the part of the results reported in "Optimization of process variables for biodiesel production by transesterification of flaxseed oil and produced biodiesel characterizations" Renewable Energy [1].
    Matched MeSH terms: Body Weights and Measures
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links