Displaying publications 1 - 20 of 93 in total

Abstract:
Sort:
  1. MILLIS J
    Med J Malaya, 1958 Mar;12(3):531-9.
    PMID: 13565024
    Matched MeSH terms: Body Weights and Measures*
  2. THOMSON FA
    Med J Malaya, 1961 Mar;15:160-5.
    PMID: 14037851
    Matched MeSH terms: Body Weights and Measures*
  3. Kadri ZN
    Med J Malaya, 1961 Dec;16:115-24.
    PMID: 14452995
    Matched MeSH terms: Body Weights and Measures*
  4. Mustaffa Hj. Abdullah, Tan TK
    Samples of Y-Ba-Cu-O superconductor with nominal compositions of YBa2Cu3O7-d + x (weight %) Y2O3 (x = 0 - 15) were prepared by solid state reaction method using the Y2Cu2O5 and BaCuO2 precursors as the starting reagents. The X-ray diffraction (XRD) diffractograms for the doped samples (x> 0) show an additional non-superconducting Y2BaCuO5 (211) phase. The scanning electron microscope (SEM) micrographs show that the smaller Y2BaCuO5 grains are precipitated on the surface of the larger YBa2Cu3O7-d (YBCO) crystals. The grain size of the YBCO decreases with increasing yttria. The superconducting zero resistivity critical temperature (Tco) of the doped samples is very close to the Tco of the YBCO for x < 5, but it seems to be significantly decreasing for larger x. The transport critical current density (J) for x < 5 is enhanced due to magnetic flux pinning process by the 211 phase. However, Jc decreased for larger x due to the increase of weak links at the grain boundaries of the YBCO phase.
    Sampel superkonduktor Y-Ba-Cu-O dengan komposisi nominal YBa2Cu3O7-d + x (% berat) Y2O3 (x = 0 -15) disediakan dengan kaedah tindakbalas keadaan pepejal menggunakan bahan pelopor Y2Cu2O5 dan BaCuO2 Difraktogram pembelauan sinar-X (XRD) bagi sampel yang didop (x > 0) menunjukkan wujudnya fasa tak mensuperkonduksi Y2BaCuO5 (211). Mikrograf mikroskop imbasan elektron (SEM) menunjukkan bahawa butiran Y2BaCuO5 yang lebih kecil itu termendap di atas permukaan hablur YBa2Cu3O7-d yang lebih besar. Saiz hablur YBCO mengecil dengan peningkatan yittria. Suhu genting kerintangan sifar (Tc) bagi sampel yang didop adalah hampir dengan Tco bagi YBCO untuk x<5, tetapi menurun dengan agak cepat untuk x yang lebih besar. Ketumpatan arus genting angkutan (J) untuk x < 5 meningkat jika dibandingkan dengan YBCO disebabkan oleh proses kepinan fluks magnet oleh fasa 211. Walau bagaimanapun, Jc menurun untuk x yang lebih tinggi kerana meningkatnya hubungan lemah pada sempadan butiran fasa YBCO.
    Matched MeSH terms: Body Weights and Measures
  5. Billa N, Yuen KH
    AAPS PharmSciTech, 2000;1(4):E30.
    PMID: 14727895
    The purpose of this research was to study processing variables at the laboratory and pilot scales that can affect hydration rates of xanthan gum matrices containing diclofenac sodium and the rate of drug release. Tablets from the laboratory scale and pilot scale proceedings were made by wet granulation. Swelling indices of xanthan gum formulations prepared with different amounts of water were measured in water under a magnifying lens. Granules were thermally treated in an oven at 60 degrees C, 70 degrees C, and 80 degrees C to study the effects of elevated temperatures on drug release from xanthan gum matrices. Granules from the pilot scale formulations were bulkier compared to their laboratory scale counterparts, resulting in more porous, softer tablets. Drug release was linear from xanthan gum matrices prepared at the laboratory scale and pilot scales; however, release was faster from the pilot scales. Thermal treatment of the granules did not affect the swelling index and rate of drug release from tablets in both the pilot and laboratory scale proceedings. On the other hand, the release from both proceedings was affected by the amount of water used for granulation and the speed of the impeller during granulation. The data suggest that processing variables that affect the degree of wetness during granulation, such as increase in impeller speed and increase in amount of water used for granulation, also may affect the swelling index of xanthan gum matrices and therefore the rate of drug release.
    Matched MeSH terms: Weights and Measures/standards
  6. Endo H, Kimura J, Oshida T, Stafford BJ, Rerkamnuaychoke W, Nishida T, et al.
    J Vet Med Sci, 2003 Nov;65(11):1179-83.
    PMID: 14665745
    Skulls of the red-cheeked squirrel (Dremomys rufigenis) from various geographical locations: Malaysia (peninsular area), Vietnam (south district)-Laos, and Thailand (north district) were osteometrically examined. The skull size of the squirrels in the southern (Malaysia) population was fundamentally larger than that in the northern (Vietnam, Laos and Thailand) populations. The proportion indices indicated that the splanchnocranium was relatively longer in the Malaysia population, and that the interorbital space was narrower in Vietnam-Laos, and Thailand populations. We suggest that the long nose and laterally-oriented orbits in the skull may be better adapted for terrestrial-insectivorous life in the Malaysia population and the binocular sense facilitated by rostrally-oriented eyes contributes to the arboreal-fruit eating behavior in the two northern populations. The Malaysia population was clearly distinguished from the other populations by the principal component analysis. We suggest that the geographical barrier of the Isthmus of Kra influences the morphological variation of the skull among the squirrel populations.
    Matched MeSH terms: Body Weights and Measures
  7. Sivananthan S, Arif M, Choon DS
    J Orthop Surg (Hong Kong), 2003 Dec;11(2):148-53.
    PMID: 14676339
    To evaluate the clinical and radiological outcome in patients undergoing small stem Exeter total hip replacement.
    Matched MeSH terms: Body Weights and Measures
  8. Moy FM, Atiya AS
    Asia Pac J Public Health, 2003;15(2):99-104.
    PMID: 15038683
    Body Mass Index (BMI) is the most established anthropometric indicator used for assessment of nutritional status. Other anthropometric indicators which are related closely to BMI are waist hip ratio (WHR) and waist circumference. In this paper, receiver operating characteristics (ROC) curves were constructed to assess the value of waist circumference and waist hip ratio as a screening measure for the need of weight management using BMI as the reference test. Sensitivity and specificity were calculated at several cut-offs. The areas under the ROC curve calculated by comparing waist circumference with BMI were high (0.70 - 0.86) while the areas calculated for WHR were low (0.46 - 0.67). Sensitivities of 0.745 and 0.800 were observed at cut-off points of waist circumference at 90cm and 80cm for males and females respectively, while the false positive rates were 0.233 for males and 0.250 for females. These cut-off points could be considered as a fair trade-off. Therefore it is concluded that waist circumference performed better than WHR as a screening test. It is indicative that waist circumference could be used as a tool in raising awareness of weight management in this population.
    Matched MeSH terms: Body Weights and Measures*
  9. Endo H, Fukuta K, Kimura J, Sasaki M, Stafford BJ
    J Vet Med Sci, 2004 Oct;66(10):1229-35.
    PMID: 15528854
    We examined the geographical variation of the skull size and shape of the lesser mouse deer (Tragulus javanicus) from Laos, Thailand, Peninsular Malaysia, Sumatra, Java, Borneo, Langkawi and some Islands of Tenasserim in Myanmar. Although the influence of the climatic condition on skull size was not confirmed in the mainland populations, the skull became rostro-caudally longer in the populations of Tenasserim and Sumatra because of island isolation effect. The skull size was classified into the following three clusters of localities from the matrix of Q-mode correlation coefficients: 1) Langkawi and Tenasserim, 2) Laos and Thailand, 3) Sumatra and Borneo. The skulls in the population of Java belong to the cluster of Langkawi and Tenasserim in male, however were morphologically similar to those in the cluster of Borneo and Sumatra. The canonical discriminant analysis pointed out that the Laos and Tenasserim populations were separated from the other ones and that the populations of Sumatra, Java and Borneo were intermingled each other.
    Matched MeSH terms: Body Weights and Measures
  10. Rogers DW, Baker RH, Chapman T, Denniff M, Pomiankowski A, Fowler K
    J Evol Biol, 2005 May;18(3):642-50.
    PMID: 15842493
    Traditionally it was thought that fitness-related traits such as male mating frequency, with a history of strong directional selection, should have little additive genetic variance and thus respond asymmetrically to bidirectional artificial selection. However, recent findings and theory suggest that a balance between selection for increased male mating frequency and opposing selection pressures on physiologically linked traits will cause male mating frequency to have high additive genetic variation and hence respond symmetrically to selection. We tested these hypotheses in the stalk-eyed fly, Cyrtodiopsis dalmanni, in which males hold harems comprising many females and so have the opportunity to mate at extremely high frequencies. We subjected male stalk-eyed flies to artificial selection for increased ('high') and decreased ('low') mating frequency in the presence of ecologically realistic, high numbers of females. High line males mated significantly more often than control or low line males. The direct response to selection was approximately symmetric in the high and low lines, revealing high additive genetic variation for, and no significant genetic constraints on, increased male mating frequency in C. dalmanni. In order to investigate trade-offs that might constrain male mating frequency under natural conditions we examined correlated responses to artificial selection. We measured accessory gland length, testis length and eyespan after 7 and 14 generations of selection. High line males had significantly larger accessory glands than low line males. No consistent correlated responses to selection were found in testis length or eyespan. Our results suggest that costs associated with the production and maintenance of large accessory glands, although yet to be identified, are likely to be a major constraint on mating frequency in natural populations of C. dalmanni.
    Matched MeSH terms: Body Weights and Measures
  11. Khairil OA, Zulfiqar A, Thambidorai CR, Nizam JM, Ahmad JT, Jamil MA
    Med J Malaysia, 2005 Oct;60(4):469-74.
    PMID: 16570709
    In the initial clinical examination of a child with ambiguous genitalia an accurate measurement of the corporeal length is needed. Most often the corporeal length is measured with a ruler from the symphysis pubis to the tip of the glans of a stretched penis. More recently, ultrasound has been successfully used to measure corporeal length. This study aimed to (i) establish normal values for corporeal length in normal male newborns using ultrasound measurement, (ii) compare these measurements to stretched corporeal measurements, (iii) compare the corporeal length of newborns of different races, and (iv) determine the relationship between corporeal length and birth weight, birth length and head circumference. This was a prospective study of 141 newborns. Ultrasound imaging was done in an oblique parasagittal plane such that the corpus could be included in a single image and measured, Stretched corporeal length was measured with the penis stretched alongside a wooden spatula and the length from the pubic bone to the tip of the glans was marked on the spatula and measured. By ultrasound measurement the mean corporeal length of the normal newborn was 3.18 +/- 0.56cm. There was no significant difference in the mean corporeal length when determined by ultrasound and by stretched corporeal measurement. There was no significant difference in the mean corporeal length of the different races when the length was determined by either ultrasound or stretched corporeal measurement. There was a positive correlation between ultrasound length and birth weight and birth length. However, there was no correlation between ultrasound length and head circumference. There was no significant correlation between the stretched length and either birth weight, birth length or head circumference.
    Matched MeSH terms: Body Weights and Measures/statistics & numerical data
  12. Matsui M, Mohamed M, Shimada T, Sudin A
    Zoolog Sci, 2007 Jan;24(1):101-6.
    PMID: 17409723
    Two forms of Staurois that are differentiated by body size occur parapatrically in the Crocker Range, Sabah, Borneo. Analyses of a total of 1,499 bp of the mitochondrial cytochrome b, 12S rRNA, and 16S rRNA genes revealed that the two forms could be completely split genetically. The two forms could be also clearly differentiated morphologically, not only by snout-vent length but also by the relative sizes of snout, eye, and finger disk. Comparisons of the two forms with all known species of the genus revealed the large and small forms to be S. tuberilinguis and S. parvus, respectively. The latter species has long been synonymized with the former, but we here consider them to represent different species.
    Matched MeSH terms: Body Weights and Measures
  13. Razak Mohd Ali Lee, Khairul Anwar Mohamad, Katsuyoshi, Hamasaki
    MyJurnal
    We put attention on Intrinsic Josephson Junction (IJJ) to study the fundamental physic for device applications. Convenient self-flux method was used to grow BSCCO single crystals. We investigated the lid effect to examine the single crystal growth of high TC (Critical Temperature). We found that for the crystal growth with no lid, two stage transitions of TC ≅ 61 K and 77 K were observed. While for the crystal growth with lid, the BSCCO has TC ≅ 80K, ΔTC = 10K and approximately average size5x2mm 2 . When we increased weight of lid, the single crystal have increased to TC =80K, ΔTC = 4K and the typical size was ≅7x3mm 2 . TC and the crystal growth show a tendency to increase by the effect of the lid. From observed quasi-particle characteristics, c-axis direction changed from semiconductor to intrinsic Josephson characteristic with decreasing temperature.
    Matched MeSH terms: Body Weights and Measures
  14. Kamarul T, Razif A, Elina R, Azura M, Chan KY
    Malays Orthop J, 2007;1(2):11-16.
    MyJurnal
    A study to determine average knee laxity in the Malaysian population and how it affects daily living was conducted at the University Malaya Medical Centre between January and April 2004. Fifty two male and 76 female subjects were recruited for this study, all of whom were healthy volunteers with no ambulatory problems. Side to side knee laxity testing was performed using a KT-1000 arthrometer. Significant differences in knee laxity were noted among different races and between sexes. For instance, overall, Chinese and female study participants had higher knee laxity: (left knee, 2.17 mm (SD=1.30) and right knee was 2.88 mm (SD= 1.51)). On average, the difference between knees was 0.70 ± 1.26 mm (less than 1 mm) which is a smaller variation than reported in previous studies which suggested 3 mm. Despite finding knee laxity ranging from 0 to 8mm, no correlations were found between Lysholm, IKDC and Tegner knee outcome scores and the degree of knee laxity. No other predictors such as height, weight and age correlated with levels of knee laxity. We therefore conclude that knee laxity is a common occurrence in the normal population and is therefore not suitable as a sole predictor of knee function and should not be used as the only criteria for surgical intervention.
    Study site: Orthopedic clinic, Universiti Malaya Medical Centre (UMMC), Kuala Lumpur, Malaysia
    Matched MeSH terms: Body Weights and Measures
  15. Al-Mekhlafi MS, Surin J, Atiya AS, Ariffin WA, Mahdy AK, Abdullah HC
    PMID: 19058591
    A cross-sectional study was carried out to determine the current prevalence of protein-energy malnutrition (PEM) among Orang Asli schoolchildren and to investigate the potential predictors of malnutrition. A total of 241 (120 males and 121 females) Orang Asli schoolchildren age 7-12 years living in remote areas of Pos Betau, Pahang participated voluntarily in this study. Anthropometric and socioeconomic data were collected and the children were screened for intestinal parasitic infections. The overall prevalences of mild and significant underweight conditions were 52.3% and 37.3%, respectively, and the prevalences of mild stunting and wasting were 43.6% and 43.1%, respectively, while the prevalences of significant stunting and wasting were 43.6% and 5.6%, respectively. There was a significant association between gender (male) and malnutrition (p = 0.029). The results also showed a higher prevalence of stunting among children age < or = 10 years than in older children (p = 0.001). Other independent variables, including socioeconomic status and intestinal parasitic infections, had no significant associations with malnutrition indices. PEM is prevalent among schoolchildren in rural Malaysia and therefore of public health concern since PEM diminishes immune function and impairs cognitive function and educational performance. School-based programs of prevention through health education and interventions should be considered as an essential part of measures to improve the quality of life of schoolchildren in rural Malaysia.
    Matched MeSH terms: Body Weights and Measures/statistics & numerical data
  16. Hasnah Ibrahim, Fatah Ab Rahman
    MyJurnal
    Individualising a drug dosage regimen is more appropriate if it is based on pharmacokinetics data derived from local populations. In this study, we estimated valproic acid (VPA) and carbamazepine (CBZ) clearances in the Malaysian population from routinely collected therapeutic drug monitoring (TDM) data. We also evaluated the effects of gender, age, weight and concurrent antiepileptic drug (AED) therapy on VPA and CBZ clearance. Data was collected retrospectively from TDM forms of adult patients. Apparent drug clearance was estimated based on the standard steady state clearance equation. Mann-Whitney and KruskalWallis tests were used to evaluate gender and therapy differences, while Spearman’s Rank correlation was used to determine the associations of age and weight with clearance. One hundred thirty-two samples for VPA and 67 for CBZ were included in the analysis. Patients’ ages ranged from 15 to 72 years old. Mean VPA and CBZ clearances were found to be 0.36 l/kg/d and 1.60 l/kg/d, respectively. VPA clearance correlated positively but poorly with weight. Our results showed significant differences in (i) VPA clearance among male and female patients and (ii) VPA clearance between monotherapy and combination therapy. These findings provide a guide to initiate maintenance doses of VPA and CBZ in our local patients. Awareness of factors influencing drug clearance should help to optimise patients’ dosing regimens.
    Matched MeSH terms: Body Weights and Measures
  17. Hasan NM, Zain RM, Abdul Rahman MF, Mustapha I
    Appl Radiat Isot, 2009 Jul-Aug;67(7-8):1239-43.
    PMID: 19303310 DOI: 10.1016/j.apradiso.2009.02.020
    A bulk of used paper supplied to recycling industry may contain water in their internal voids. This is because the price of the used paper is currently based on their weight and it has a huge potential of suppliers to add with water in order to increase the price. Currently used methods for detecting moisture content in a paper are restricted to a sheet of paper only. This paper presents a non-intrusive method for quick and in-situ measurement of water content in a bulk of used paper. The proposed method extends the capability of common paper moisture gauge, by using a neutron device. A fast neutron source (Am-Be 241) and a portable backscattering neutron detector are used for water measurement. It theoretically indicates that the slow neutron counts can be correlated to the hydrogen or water level in a paper. The method has the potential of being used by the paper-recycling industry for rapid and non-destructive measurement of water in a bulk of used paper.
    Matched MeSH terms: Body Weights and Measures
  18. Ahmad, M.H., Norzaie, J., Al Qbadi, F., Daniel, B.D.
    ASM Science Journal, 2009;3(1):17-26.
    MyJurnal
    The functions of dams are for water supply, flood control and hydroelectric power generation. A concrete faced rockfill dam (CFRD) is preferred by dam consultants due to its many advantages. It is designed to withstand all applied loads, namely gravity load due to its massive weight and hydrostatic load due to water thrust from the reservoir. The structural response of the Bakun CFRD which is the second highest dam in the world after the Shuibuya Dam, was analyzed using finite element method. A two-dimensional plane strain finite element analysis of the non-linear Duncan-Chang hyperbolic model was used in the study of the dam in respect to the deformation and stresses of the main dam of Bakun CFRD project. The Dead-Birth-Ghost element technique was used to simulate sequences of the construction of the dam. The comparison of rigid and flexible foundation on the behaviour of the dam is discussed in this study. In the finite element modeling, the concrete slab on the upstream was represented through a six-noded element, while the interface characteristic between the dam body and the concrete slab was modeled using an interface element. The maximum settlement and stresses of the cross-section were found and their distribution was discussed and tabulated in the form of contours. The effect of reservoir filling loading had a gradual effect on the dam response behaviour. Comparisons with no water impoundment in the dam were also discussed.
    Matched MeSH terms: Body Weights and Measures
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links