A total of 2,153 high vaginal swabs were processed for the presence of yeasts. The specimens were obtained from pregnant and non-pregnant Malaysian women with and without vaginitis. The yeast species most commonly isolated were Candida albicans, C. glabrata, C. famata and C. parapsilosis. C. albicans was isolated from 27% of pregnant women with vaginitis, 14% of pregnant women with no overt vaginitis, 15% of non-pregnant women with vaginitis, and 3% of non-pregnant women with no vaginitis. The significant difference of the isolation rates from women with and without vaginitis indicates that C. albicans is likely to be a vaginal pathogen.
Vaginal discharge is a common complaint of women attending gynaecological clinics. The purpose of this study was to compare the occurrence of commonly implicated microorganisms in vaginal discharge amongst women with or without the complaint, attending a gynaecological and family planning clinic. The association of Gardnerella vaginalis with bacterial vaginosis was also studied. It was found that there were no significant differences between the cases and controls in the isolation rate of Gardnerella vaginalis, Torulopsis glabrata, Ureaplasma urealyticum, Mycoplasma ssp and Group B streptococcus (p greater than 0.05). Only the isolation rate of Candida albicans was significantly higher in the cases than controls (p less than 0.01). However, there was a significant association of G. vaginalis with bacterial vaginosis.
Ethanolic extract of Cassia alata leaves was investigated for its antimicrobial activities on several microorganisms including bacteria, yeast, dermatophytic fungi and non-dermatophytic fungi. In vitro, the extract exhibited high activity against various species of dermatophytic fungi but low activity against non-dermatophytic fungi. However, bacterial and yeast species showed resistance against in vitro treatment with the extract. The minimum inhibitory concentration (MIC) values of the extract revealed that Trichophyton mentagorphytes var. interdigitale, Trichophyton mentagrophytes var. mentagorophytes, Trichophyton rubrum and Microsporum gypseum had the MIC of 125 mg/ml, whereas Microsporum canis had the MIC of 62.5 mg/ml. The inhibition can be observed on the macroconidia of Microsporum gypseum which resulted in structural degeneration beyond repair. The mechanism of inhibition can be related to the cell leakage as observed by irregular, wrinkle shape and loss in rigidity of the macroconidia.
The extract of the Psophocarpus tetragonolobus pods has been tested for antimicrobial activity in a disk diffusion assay on eight human pathogenic bacteria and two human pathogenic yeasts. The extracts of P. tetragonolobus possessed antimicrobial activity against all tested strains. The ethanolic extract of P. tetragonolobus pods was further tested for in vivo brine shrimp lethality test and in vitro sheep erythrocyte cytotoxic assay. The brine shrimp lethality test exhibited no significant toxicity (LC(50)=1.88 mg/ml) against Artemia salina, whereas sheep erythrocyte test showed significant toxicity. The reason for haemolysis of erythrocyte was discussed. The P. tetragonolobus extract with high LC(50) value signified that this plant is not toxic to human. This result also suggested that the ethanolic extract of P. tetragonolobus pods is potential source for novel antimicrobial compounds.
Consecutive chloroform, ethanol, and ethyl acetate partitions of extracts from winged bean [Psophocarpus tetragonolobus (L.) DC] root, stem, leaf, and pod extracts were tested for their antimicrobial activity against 19 microbial species, including 11 bacterial pathogens, four yeasts, and four molds using the disk diffusion assay technique. The pod extract was found to be most effective against all of the tested organisms, followed by the stem, root, and leaf extracts, and the ethanol fraction showed the most significant (p < 0.05) antimicrobial activity against all of the tests among three soluble fractions of extract, followed by the ethyl acetate and chloroform fractions. The minimum inhibitory concentrations (MICs) of extracts determined by the broth dilution method ranged from 1.25 to 10.0 mg/mL. The MIC of ethanol fraction of pod extracts was the lowest by comparison with the other two extracts. The MIC for fungi was at or below 2.5 mg/mL and for bacteria was at or above 2.5 mg/mL.
Matched MeSH terms: Yeasts/drug effects*; Yeasts/growth & development
Chemical preservatives have been used in the food industry for many years. However, with increased health concerns, consumers prefer additive-free products or food preservatives based on natural products. This study evaluated antimicrobial activities of extracts from Emilia sonchifolia L. (Common name: lilac tassel flower), Tridax procumbens L. (Common name: tridax daisy) and Vernonia cinerea L. (Common name: Sahadevi), belonging to the Asteracea family, to explore their potential for use against general food spoilage and human pathogens so that new food preservatives may be developed. Three methanol extracts of these plants were tested in vitro against 20 bacterial species, 3 yeast species, and 12 filamentous fungi by the agar diffusion and broth dilution methods. The V. cinerea extract was found to be most effective against all of the tested organisms and the methanol fraction showed the most significant (p < 0.05) antimicrobial
activity among all the soluble fractions tested. The minimum inhibitory concentrations (MICs) of extracts determined by the broth dilution method ranged from 1.56 to 100.00mg/mL. The MIC of methanol fraction was the lowest in comparison to the other four extracts. The study findings indicate that bioactive natural products from these plants may be isolated for further testing as leads in the development of new pharmaceuticals in food preservation as well as natural plant-based medicine.
The aim of this study was to investigate the presence of multidrug resistant yeasts in the faeces of synanthropic wild birds from the Bangsar suburb of Kuala Lumpur.
This study describes the killer phenotypes of tropical environmental yeasts and the inhibition effects of the culture filtrates on the biofilm of Candida albicans. A total of 26 (10.5%) of 258 yeast isolates obtained from an environmental sampling study demonstrated killer activity to Candida species. The killer yeasts were identified as species belonging to the genus Aureobasidium, Pseudozyma, Ustilago and Candida based on sequence analysis of the ITS1-5.8S-ITS2 region of the yeasts. Pseudozyma showed the broadest killing effects against sensitive strains of Candida. New species of Ustilago and Pseudozyma demonstrating killer phenotypes were identified in this study. Interestingly, more than 50% reduction in the metabolic activity of Candida albicans biofilm was noted after exposure to the culture filtrates of the nine killer yeasts. Purification and characterization of toxin and metabolites are essential for understanding the yeast killing effects.
Bioethanol production using yeast has become a popular topic due to worrying depleting worldwide fuel reserve. The aim of the study was to investigate the capability of Malaysia yeast strains isolated from starter culture used in traditional fermented food and alcoholic beverages in producing Bioethanol using alginate beads entrapment method. The starter yeast consists of groups of microbes, thus the yeasts were grown in Sabouraud agar to obtain single colony called ST1 (tuak) and ST3 (tapai). The growth in Yeast Potatoes Dextrose (YPD) resulted in specific growth of ST1 at micro = 0.396 h-1 and ST3 at micro = 0.38 h-1, with maximum ethanol production of 7.36 g L-1 observed using ST1 strain. The two strains were then immobilized using calcium alginate entrapment method producing average alginate beads size of 0.51 cm and were grown in different substrates; YPD medium and Local Brown Sugar (LBS) for 8 h in flask. The maximum ethanol concentration measured after 7 h were at 6.63 and 6.59 g L-1 in YPD media and 1.54 and 1.39 g L-1in LBS media for ST1 and ST3, respectively. The use of LBS as carbon source showed higher yield of product (Yp/s), 0.59 g g-1 compared to YPD, 0.25 g g-1 in ST1 and (Yp/s), 0.54 g g-1 compared to YPD, 0.24 g g-1 in ST3 . This study indicated the possibility of using local strains (STI and ST3) to produce bioethanol via immobilization technique with local materials as substrate.
The biodiversity and the killer activity of yeasts isolated from various types of fermented food in Malaysia were investigated in this study. Of 252 yeasts isolated from 48 fermented food samples in this study, 19 yeast species were identified based on sequence analysis of the ITS1-5.8S-ITS2 partial fragments of the yeasts. A total of 29 (11.5%) of the yeast isolates demonstrated killer activity to at least one Candida species tested in this study; including 22 isolates of Trichosporon asahii, 4 isolates of Pichia anomala, and one isolate each of Pichia norvegensis, Pichia fermentans and Issatchenkia orientalis, respectively. The presence of killer yeasts reflects antagonism that occurs during microbial interaction in the fermented food, whereby certain yeasts produce killer toxins and possibly other toxic substances in competition for limited nutrients and space. The anti-Candida activity demonstrated by killer yeasts in this study should be further explored for development of alternative therapy against candidiasis.
The yeast species composition of 12 cocoa bean fermentations carried out in Brazil, Ecuador, Ivory Coast and Malaysia was investigated culture-independently. Denaturing gradient gel electrophoresis of 26S rRNA gene fragments, obtained through polymerase chain reaction with universal eukaryotic primers, was carried out with two different commercial apparatus (the DCode and CBS systems). In general, this molecular method allowed a rapid monitoring of the yeast species prevailing during fermentation. Under similar and optimal denaturing gradient gel electrophoresis conditions, the CBS system allowed a better separated band pattern than the DCode system and an unambiguous detection of the prevailing species present in the fermentation samples. The most frequent yeast species were Hanseniaspora sp., followed by Pichia kudriavzevii and Saccharomyces cerevisiae, independent of the origin of the cocoa. This indicates a restricted yeast species composition of the cocoa bean fermentation process. Exceptionally, the Ivorian cocoa bean box fermentation samples showed a wider yeast species composition, with Hyphopichia burtonii and Meyerozyma caribbica among the main representatives. Yeasts were not detected in the samples when the temperature inside the fermenting cocoa pulp-bean mass reached values higher than 45 °C or under early acetic acid production conditions.
Exotic functions of antifreeze proteins (AFP) and antifreeze glycopeptides (AFGP) have recently been attracted with much interest to develop them as commercial products. AFPs and AFGPs inhibit ice crystal growth by lowering the water freezing point without changing the water melting point. Our group isolated the Antarctic yeast Glaciozyma antarctica that expresses antifreeze protein to assist it in its survival mechanism at sub-zero temperatures. The protein is unique and novel, indicated by its low sequence homology compared to those of other AFPs. We explore the structure-function relationship of G. antarctica AFP using various approaches ranging from protein structure prediction, peptide design and antifreeze activity assays, nuclear magnetic resonance (NMR) studies and molecular dynamics simulation. The predicted secondary structure of G. antarctica AFP shows several α-helices, assumed to be responsible for its antifreeze activity. We designed several peptide fragments derived from the amino acid sequences of α-helical regions of the parent AFP and they also showed substantial antifreeze activities, below that of the original AFP. The relationship between peptide structure and activity was explored by NMR spectroscopy and molecular dynamics simulation. NMR results show that the antifreeze activity of the peptides correlates with their helicity and geometrical straightforwardness. Furthermore, molecular dynamics simulation also suggests that the activity of the designed peptides can be explained in terms of the structural rigidity/flexibility, i.e., the most active peptide demonstrates higher structural stability, lower flexibility than that of the other peptides with lower activities, and of lower rigidity. This report represents the first detailed report of downsizing a yeast AFP into its peptide fragments with measurable antifreeze activities.
The yield and properties of cellulose produced from bacterial fermentation of black tea broth (known as Kombucha) were investigated in this study. The tea broth was fermented naturally over a period of up to 8 days in the presence of sucrose. Tea broth with a sucrose concentration of 90 g/l produced highest yield of bacterial cellulose (66.9%). The thickness and yield of bacterial cellulose increased with fermentation time. The bacterial cellulose production increased correspondingly with increased surface area:depth ratio. Changes in pH were related to the symbiotic metabolic activities of yeasts and acetic acid bacteria, and the counts of both of these in the tea broths were relatively higher than those in the cellulose layer. Findings from this study suggest that the yield of cellulose depends on many factors that need to be optimized to achieve maximum yield.
Onychomycosis is the infection of nail apparatus by dermatophytes, yeasts or non-dermatophyte moulds and is responsible for 50% of all nail disorders. A five year retrospective study was conducted at Universiti Kebangsaan Malaysia to identify the common pathogens responsible for onychomycosis and to describe the epidemiology of the affected patients. A total of 278 abnormal nails were cultured, out of which 231 were positive for fungus. Females constituted 50.2% (n=116) while males 49.8% (n=115). The majority (51.9%, n=120) were between ages 50-69 years. The Malay ethnic group was most commonly affected (44.2%, n=102) followed by Chinese (33.8%, n=78), Indians (18.2%, n=42) and other ethnic groups (3.8%, n=9). The most common fungal element isolated was non-dermatophyte moulds (45.4%, n=105) followed by yeast (34.6%, n=80) and dermatophytes (1.3%, n=3). Aspergillus spp. was the commonest (59.8%,n=81) non-dermatophyte mould, while Candida spp. was the commonest yeast (74.3%, n=89) isolated. In this study, non-dermatophyte moulds are the most common microorganisms implicated to cause onychomysosis. Treatment for non-dermatophyte mould is challenging as the current available antifungal agents are more effective against dermatophytes and yeasts.
Copper nanoparticle synthesis has been gaining attention due to its availability. However, factors such as agglomeration and rapid oxidation have made it a difficult research area. In the present work, pure copper nanoparticles were prepared in the presence of a chitosan stabilizer through chemical means. The purity of the nanoparticles was authenticated using different characterization techniques, including ultraviolet visible spectroscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and field emission scanning electron microscopy. The antibacterial as well as antifungal activity of the nanoparticles were investigated using several microorganisms of interest, including methicillin-resistant Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Salmonella choleraesuis, and Candida albicans. The effect of a chitosan medium on growth of the microorganism was studied, and this was found to influence growth rate. The size of the copper nanoparticles obtained was in the range of 2-350 nm, depending on the concentration of the chitosan stabilizer.
Mixotrophic metabolism was evaluated as an option to augment the growth and lipid production of marine microalga Tetraselmis sp. FTC 209. In this study, a five-level three-factor central composite design (CCD) was implemented in order to enrich the W-30 algal growth medium. Response surface methodology (RSM) was employed to model the effect of three medium variables, that is, glucose (organic C source), NaNO3 (primary N source), and yeast extract (supplementary N, amino acids, and vitamins) on biomass concentration, X(max), and lipid yield, P(max)/X(max). RSM capability was also weighed against an artificial neural network (ANN) approach for predicting a composition that would result in maximum lipid productivity, Pr(lipid). A quadratic regression from RSM and a Levenberg-Marquardt trained ANN network composed of 10 hidden neurons eventually produced comparable results, albeit ANN formulation was observed to yield higher values of response outputs. Finalized glucose (24.05 g/L), NaNO3 (4.70 g/L), and yeast extract (0.93 g/L) concentration, affected an increase of X(max) to 12.38 g/L and lipid a accumulation of 195.77 mg/g dcw. This contributed to a lipid productivity of 173.11 mg/L per day in the course of two-week cultivation.
Cantaloupes continue to ripen after harvesting which is caused by ethylene production due to climacteric behaviour during postharvest storage. In this study, the cantaloupe fruits harvested at commercial maturity were evaluated for quality attributes during three weeks of storage at 10°C and a relative humidity (RH) of 90±5%. In addition, fresh-cut samples were stored for a further 19 days at 2°C and 87% RH. The fresh-cut samples were prepared on a weekly basis by dipping into deionised water (control) at 2°C for 1 minute. The effect of postharvest storage of cantaloupe on the physico-chemical properties and microbial activity was observed prior to fresh-cut processing. It was found that firmness, luminosity (L*), and titratable acidity (TA) decreased, while total soluble solids (TSS), pH, TSS:TA ratio, microbial activity (total plate count (TPC) and yeast and mould (YM)) of the fresh-cut increased over the postharvest storage period of the fruit. Meanwhile, the orange colour and the intensity (hue angle, hab, and chromaticity) of the flesh did not differ significantly during storage. The cantaloupe stored for three weeks at a low temperature indicated a successful potential for fresh-cut processing due to good maintenance of the product quality.