‘Nasi kandar’ is defined as boiled white rice placed inside a wooden basket and carried on the shoulder using a pole. The rice is served with a variety of pairing dishes that are usually fried, curried or boiled. The tradition of carrying rice and pairing dishes on the shoulder began to die out in the 20th century as seller resorted to a more conventional way of selling ‘nasi kandar’. The ‘nasi kandar’ business in Malaysia has evolved from being sold as a street food into a multi-million dollar franchise business rivalling the fast food business. It is available 24 hours and enjoyed by Malaysians from all walks of life. This study aims to compare ‘nasi kandar’ eating pattern among patrons in the Klang Valley and Penang. Three hundred sets of questionnaires were answered and collected. Data from the questionnaires were analyzed in PASW 18.0 using descriptive statistics and chi-square test for association. Klang Valley patrons (72%) would consume ‘nasi kandar’ once a week. More than half (53.3%) of the patrons from Penang consumed ‘nasi kandar’ more than twice a week. A significant relationship exists between patron’s region and frequency of ‘nasi kandar’ consumption where p = <0.0001 and r = 0.277. A significant but moderate relationship between patron’s region and consumption of ‘nasi kandar’ during breakfast (p = <0.001, r = 0.250), lunch (p = <0.0001, r = 264) and dinner (p = <0.0001, r = 0.336). Patrons in Penang consumed ‘nasi kandar’ more often than their Klang Valley counterparts. Klang Valley patrons were more particular than Penang patrons when it comes to cleanliness, menu pricing, friendly service, air-condition and separate smoking area. Klang Valley patrons tend to consume more chicken based dishes while Penang patrons tend to consume more meat, fish, and squid based dishes.
Disaster can strike at any time on a small or large scale, but if an institution is prepared, the damage may be reduced or avoided. A disaster is a serious disruption of the functioning of a society, causing widespread human, material, or environmental losses which exceed the ability of affected society to cope using only its own resources. Disasters are often classified according to their speed of onset (sudden or ‘slow burning’), or according to their cause (natural or man-made). There is no single and specific method in handling a disaster. The application and method of disaster management do not only depend on types, location and levels of disaster, but also depend on the effectiveness and good system of management as well as the total commitment of first responders and disaster managers involved in handling a disaster. National Security Council Directive No. 20 is both a proactive and reactive generic plan to manage disasters in Malaysia. It is an integrated disaster management plan in mitigation, preparedness, response and recovery.
Industrial heat pumps are heat-recovery systems that allow the temperature of waste-heat stream to be increased to a higher, more efficient temperature. Consequently, heat pumps can improve energy efficiency in industrial processes as well as energy savings when conventional passive-heat recovery is not possible. In this paper, possible ways of saving energy in the chemical industry are considered, the objective is to reduce the primary energy (such as coal) consumption of power plant. Particularly the thermodynamic analyses of integrating backpressure turbine of a power plant with distillation units have been considered. Some practical examples such as conventional distillation unit and heat pump are used as a means of reducing primary energy consumption with tangible indications of energy savings. The heat pump distillation is operated via electrical power from the power plant. The exergy efficiency of the primary fuel is calculated for different operating range of the heat pump distillation. This is then compared with a conventional distillation unit that depends on saturated steam from a power plant as the source of energy. The results obtained show that heat pump distillation is an economic way to save energy if the temperature difference between the overhead and the bottom is small. Based on the result, the energy saved by the application of a heat pump distillation is improved compared to conventional distillation unit.
The process of etching is the most crucial part of the work of manufacturing printed circuit boards (PCB). In the etching process by nitric acid, a spent etching waste solution of composition 250 g/L HNO3, 30-40 g/L Cu, 30-40 g/L Sn, 30-40 g/L Pb and 20-25 g/L Fe is produced. High metal concentrations in the spent etching waste solution make it a viable candidate for the recovery of metals. Recovery of metals from spent etching waste solution is a significant concern as the recent growth in production of printed circuit boards has generated a drastic increase of spent etching waste solution each year. This study concerns itself with the recovery of metals from spent etching waste. In this study a dilution was made in order to increase the pH of the solution as spent etching waste solution has high acidity, and the electrowinning method was performed to recover metals from the spent etching waste solution. Glassy carbon and platinum were used as cathode and anode in order to investigate the electrodeposition of metals and cyclic voltammetry investigation suggests that the deposition of metals on glassy carbon electrodes occurs at four different overpotentials mainly at -0.15 V, -0.35 V, -0.45 V and -0.75 V. Microscopy observation demonstrates that there is a deposition of metals by applying the potentials in a set of current-time transient study for a duration of 60 seconds and the metals recovered formed as aggregates.
This study aims to determine the combined effects of hydrolysis time, temperature, pH and ratio of enzyme to substrate on the degree of hydrolysis (DH) of silver catfish frame using Response Surface Methodology. The proximate compositions of silver catfish frame and silver catfish hydrolysate powder were determined as well. The effects of independent factors were described using a three-level factors Face Centered Central Composite design. The suggested hydrolysis conditions for obtaining the optimum DH using Alcalase® were – temperature of 55oC, hydrolysis time of 163 min, pH of substrate at 9.45 and an enzyme concentration of 2.0%. The generated model showed a quadratic fit with experimental data. Proximate analyses revealed that silver catfish frame contained 25.02% protein, 68.21% fat and 7.08% ash. While silver catfish frame hydrolysate powder contained 65.05% protein, 32.92% fat and 0.86% ash. The protein recovery in silver catfish frame hydrolysate was as high as 71.6%.
The exponential fed-batch cultivation of Bacillus sphaericus UPMB10 in 2 l stirred tank fermenter was performed by feeding the initial batch culture with 14 g l-1 of glycerol according to the algorithm aimed at controlling the specific growth rate (μ) of the bacterium. Very high viable cell count (1.14 x 1010 cfu ml-1), which was four times higher as compared to batch cultivation, was achieved in the fed-batch with a controlled μ at 0.4 h-1. In repeated exponential fed-batch cultivation, consisting of four cycles of harvesting and recharging, a final cell concentration of 1.9 x 1011 cfu ml-1 was obtained at the end of the fourth cycle (46 h). Meanwhile, acetylene reduction of cell samples collected from repeated fed-batch cultivation remained unchanged and was maintained at around 20 nmol C2H2 h-1 ml-1 after prolonged cultivation period, and was comparable to those obtained in batch and exponential fed-batch cultivation. Glycerol could be used as a carbon source for high performance cultivation of B. sphaericus, a nitrogen fixing bacterium, in repeated fed-batch cultivation with high cell yield and cell productivity. The productivity (0.68 g l-1 h-1) for repeated fed-batch cultivation increased about 6 times compared to that obtained in conventional batch cultivation (0.11 g l1 h-1). A innovative method in utilizing glycerol for efficient cultivation of nitrogen fixing bacterium could be beneficial to get more understanding and reference in manipulating the integrated plans for sustainable and profitable biodiesel industry.
Mediastinal mature cycstic teratomas are rare germ cell tumors most commonly found in the anterior mediastinum, and constitute about 3-12% of all mediastinal tumors. They grow slowly and are usually diagnosed incidentally. This is a rare presentation of a young lady with mediastinal mature cystic teratoma (dermoid cyst) presenting with chronic cough and haemoptysis.
In July 1997 at 7 pm , 49 members 0f the public complained of dizziness, sore throat, eyes irritation and tightness of chest after exposed to sulphur dioxide while traveling on the road about 100 meter 90m the sulphuric acid factory in Teluk Kalong Kemaman. The incident was caused by leaking sulfur dioxide from return pipe of scrubber circulation. tank in the factory. The problem had occurred due to carelessness of the operator to inspect the level of water in the scrubber circulation tank during the operation.
Although lipoma is common in the upper limbs, it rarely occurs in the palm, and usually does not compress the surrounding structures. Here, we report a patient presenting with compressive neuropathy of the ulna and median nerves secondary to a palmar lipoma. Surgical excision led to full neurological recovery.
Since the discovery of carbon nanotubes (CNTs) in 1991, a fundamental question still remained on how to control morphologically the synthesis of CNTs. This task has always been a challenge. In this paper, we report the results that we have published previously with the aim of sharing the possible controlled synthesis approach via this novel production method. Findings demonstrated that various CNTs could be synthesized by using specially developed supported catalysts from the catalytic decomposition of methane. These synthesized CNTs include carbon nanofibres, single-walled and multi-walled CNTs, Y-junction CNTs and CNTs with special morphologies. It was also revealed that catalyst composition and reaction parameters played an important role in controlling the morphology and type of CNTs formed. The synthesis of CNTs with various morphologies is important because this can enrich the nanostructures of the carbon family. This finding also provides useful data for better understanding of the parameters that govern the growth mechanism of CNTs which may be required in the near future for enhanced controlled synthesis of CNTs.
The central coast of Tamil Nadu, Andaman and Nicobar Islands, along with other regions, was severely hit by the tsunami on 26 December 2004. A strange spawning behaviour of the Indian horseshoe crabs (Tachypleus gigas, Müller) was observed after the tsunami disturbance. Along the northeast coast of India, the horseshoe crabs normally migrate towards the shore in large numbers coinciding with the tidal height and grain size of the sediment and spawn in nests made in sand. The spawning behaviour was normal until November 2004 and throughout that period about 35 to 45 nests in 200 m2 of area of the breeding beach were examined. However, no nesting was observed from December 2004 to March 2005, i.e. after the occurrence of tsunami. The number of nests per 200 m2 of area (~82) and the number of eggs per nest (750-1000 eggs) were increased considerably when the normal conditions were restored in April 2005. The absence of spawning migration, from December 2004 to March 2005, is totally an unusual behaviour and this happened for the first time during the past several years of the study period.
Natural radionuclides such as 210 Po and 210 Pb were analyzed in soft part of cockle (Anadara granosa) obtained from Kuala Selangor in the west coast Peninsular of Malaysia. The activity levels of both nuclides fluctuated within the size of cockles from 41.3 ± 2.5 Bq/kg to 114 ± 7 Bq/kg and 12.9 ± 1.7 Bq/kg to 96.8 ± 5.3 Bq/kg in dry weight (dwt) for 210 Po and 210 Pb, respectively. The level activity in wet weight (wwt) also varied from 8.60 ± 0.52 Bq/kg to 25.70 ± 1.63 Bq/kg and 2.47 ± 0.40 Bq/kg to 19.27 ± 1.05 Bq/kg for 210 Po and 210 Pb, respectively, probably related to the different of metabolic rate and growth of cockles. Activity ratio of 210 Po/ 210 Pb in dry weight also fluctuated from 0.93 to 6.41 with not related to the decay of 210 Pb.
Sulfonamides (SAs), synthetic antibiotics, are commonly used by veterinarians in chicken for therapeutic, prophylactic or as growth promoter and halt the growth of bacteria in animal production. Four common SAs, Sulfadiazine (SDZ), Sulfamethazine (SMZ), Sulfamethoxazole (SMX) and Sulfaquinoxaline (SQX), were determined in chicken breast and liver samples using reverse phase HPLC using UV detector at 266nm. The concentration of SAs detected in samples from 11 states in Peninsular Malaysia ranged from 0.006-0.062 µg/g in breast meat samples and 0.08-0.193 µg/g in liver samples. Except for sample from Johor, concentration of SAs in all the samples were lower than MRLs established by Malaysia (0.1 µg/g). Exposure of sulfonamides in Malaysian consumers ranged from 0.002-0.088 µg/kg body wt. /day. The highest value of sulfonamides exposure was found in Johor with an estimated daily intake (EDA) of Sulfamethoxazole (SMX) in Johor.
Currently, data concerning the content of naturally occurring dietary folate in Malaysian foods is scarce. The aim of this study was to determine the folate content of vegetables, fruits, legumes and cereals that were commonly consumed among Malaysians. The total folate content of 156 samples (51 vegetables, 33 fruits, 22 legumes and legume products, and 50 cereals and cereal products) available in Malaysia was determined by microbiological assay using Lactobacillus casei (L. casei) after trienzyme treatment with protease, α-amylase and folate conjugase (from rat serum). An internal quality control system was used throughout the study by analyzing CRM 121 (wholemeal flour) and CRM 485 (lyophilized mixed vegetables); percent recovery (as mean ± SD) of 97 ± 2.0 and 101 ± 4.0 was obtained. The range of folate content in vegetables, fruits, legumes and cereals were 1-11 μg/100 g and 1-31on the basis of fresh weight and 1-31 µg/100 g and 2-156 µg/100 g on the basis of dry weight, respectively. This study has shown that some of these underutilized vegetables and fruits are good sources of folate and could fulfill the recommended dietary intake of total folate.
Amitraz poisoning is rare and there has been no reported cases in the Malaysian literature. Ingestion of this compound carries many life threatening side effects. We describe a case of Amitraz poisoning in an 18 years old young adult. He developed hypotension, required ventilatory support and a day of intensive care unit stay. He had a quick recovery after he was treated symptomatically and was discharged well after 3 days.
In agricultural systems, animals play a very important multifunctional role for developing communities
throughout the world. This is reflected in the generation of value-added products like meat, milk and eggs for food security; socio-economic benefits like increased income, security and survival, and an infinite variety of services such as the supply of draught power and dung for soil fertility. However, and despite this importance, the situation is awesome since the projected total meat and milk consumption levels in 2020 are far in excess of anticipated supply, and projections of both meat and milk will have to be doubled by 2050 to meet human requirements. Strategies for productivity growth from animals are therefore urgent, and are discussed in the context of the scenario of waning agriculture, extreme poverty and hunger, food crisis, the current contributions from the components of the animal industries, prevailing constraints, opportunities and strategies for improved production. Current trends suggest that the non-ruminant pig and poultry industries will continue to contribute the major share of meat and all of egg production to meet projected human needs. With ruminants by comparison, overall meat production continues to come mainly from the slaughter of numbers. Strategic opportunities exist for maximising productivity in improved production systems. These include targeting rainfed areas, development of small farms, integrated crop-animal systems, intensive application of productivity-enhancing technologies, promoting intensive use of crop residues and expanding the R&D frontiers with interdisciplinarity and farming
systems perspectives. The issues, together with increased investments and institutional commitment, provide for expanded animal production systems and productivity which can forcefully impact on improved human welfare in Asia in the immediate tomorrow.
Salmonella has caused foodborne illnesses globally and it has been a rising threat on fresh produce. The objective of this study was to determine the prevalence and concentration of Salmonella spp., Salmonella Typhi and Salmonella Typhimurium in freshly prepared fruit juice sold at hawker stalls. Analysis was conducted by employing most probable number-polymerase chain reaction (MPN-PCR). A total of 50 freshly prepared fruit juices were examined and the prevalence of Salmonella spp., Salmonella Typhi and Salmonella Typhimurium in the fruit juices were 34%, 20% and 10%, respectively, with an estimated microbial load varying from 0 to 42 MPN/g. Of the five different fruits, carrot juice had the highest prevalence of Salmonella spp. (60%) and Salmonella Typhi (40%). However, Salmonella Typhimurium was detected in apple (30%), orange (10%) and starfruit juice (10%). Factors contributing to the presence of Salmonella were cross-contamination and poor sanitation practice. Besides, negligence on temperature and storage time also led to the growth of Salmonella. Proper monitoring and risk assessment are needed in order to establish control measures to ensure the quality and safety of fruit juices in Malaysia.
Tropical greenhouses require active evaporative cooling system such as pad-and-fan to ensure a suitable microclimate for crop production. Excess heat causes indoor temperature to become hotter than desired resulting in detrimental effects to crop growth and production. Solar radiation intensity and outside temperature affect temperature and relative humidity level inside a greenhouse, while wide gradients in temperature and relative humidity can cause problems related to crop growth and production uniformity. A 300 m2 greenhouse, equipped with evaporative pad and four exhaust fans at each end walls, was used in the study. Horizontal and vertical profiles of the temperature and relative humidity inside the greenhouse were investigated. Results showed that temperature increased from evaporative pad area to exhaust fans area in a horizontal plane, while relative humidity showed an inverse pattern from temperature. In the vertical plane, temperature increased, while relative humidity decreased from lower level to the upper level. ANOVA results showed that in overall, temperature and relative humidity inside the greenhouse were uniform as there was no significant difference at 95% confidence interval. Thus, it was concluded that greenhouse cooling system by evaporative pad and exhaust fans are suitable for application in a tropical country such as Malaysia.
Lead-free solder paste printing processes account for the majority of assembly defects in the electronic manufacturing industry. In the stencil printing process, the solder paste must be able to withstand low and high shear rates which result in continuous structural breakdown and build-up. This study investigated the effect of the addition of nickel and platinum powders to the thixotropic behaviour of lead-free Sn/Ag/Cu solder pastes using the structural kinetic model. A hysteresis loop test and constant shear test were utilized to investigate the thixotropic behaviour of the pastes using parallel plate rheometry at 25ºC. In this study, the shear rates were increased from 0.01 s–1 to 10 s–1 and the second curve was a result of decreasing the shear rate from 10 s–1 to 0.01 s–1. For the constant shear test, the samples were subjected to five different shear rates of 0.01s–1, 0.1s–1, 1s–1, 10s–1 and 100s–1. The constant shear rate test was designed to study the structural breakdown and build-up of the paste materials. From this investigation, the hysteresis loop test was shown to be an effective test method to differentiate the extent of structural recovery in the solder pastes. All the pastes showed a high degree of shear thinning behaviour with time. This might be due to the agglomeration of particles in the flux that prohibited paste flow under low shear rate. The action of high shear rate would break the agglomerates into smaller pieces which facilitated the flow of pastes, thus viscosity was reduced at high shear rate.
Pathogenic Vibrio parahaemolyticus is one of the leading causes of bacterial gastroenteritis in many countries. Among the strains examined, 36 RAPD-types were found when amplified with primers OPA8 and OPA10. The analysis shows the majority of V. parahaemolyticus isolates originated from seafood were branched into four major clusters at 18.2%, 20.7% 34% and 3.4% similarity levels. This suggests that there is potential for a single strain to be distributed widely within a population and there also potential for multiple contaminating strains of different clonal lineages to be present within the same population. Optimum temperature (37ºC) was the highest and stable formation of biofilm. The total percentage of biofilm formation at 37ºC was 33.33% for each of weak, moderate and strong biofilm producers. Room temperature produces 61.1% of weak biofilm producer, while 13. 89% for moderate biofilm producers and produce 25% of strong biofilm. While a total of 91.67% weak biofilm producers at 4ºC and 8:33% for room temperature and no growth of strong biofilm. Upon analysis, strong biofilm was tracked from the largest group at 37°C and room temperature which produce 27.27% of strong biofilm producer respectively. Interestingly, they are derived from cockles.