Displaying publications 1 - 20 of 150 in total

Abstract:
Sort:
  1. Ivorra T, Rahimi R, Goh TG, Azmiera N, Nur-Aliah NA, Low VL, et al.
    Int J Legal Med, 2024 Mar;138(2):677-683.
    PMID: 37211557 DOI: 10.1007/s00414-023-03023-z
    A partially skeletonized human corpse was found in bushes in Selangor, Malaysia in June 2020. Entomological evidence was collected during the autopsy and sent to the Department of Medical Microbiology and Parasitology, Faculty of Medicine, Universiti Teknologi MARA (UiTM) for minimum postmortem interval (PMImin) analysis. Standard protocols were applied when processing preserved and live insect specimens of both larval and pupal stages. Entomological evidence revealed that the corpse was colonized by Chrysomya nigripes Aubertin, 1932 (Diptera: Calliphoridae) and Diamesus osculans (Vigors, 1825) (Coleoptera: Silphidae). Chrysomya nigripes was chosen as the PMImin indicator as this fly species is an earlier colonizer compared to D. osculans beetle larvae which their presence is the indicative of late stage of decomposition. For the present case, the pupae of C. nigripes were the oldest insect evidence collected and based on the available developmental data, the estimated minimum PMI was established between 9 and 12 days. It is noteworthy to highlight that this is the first record of D. osculans colonization on a human corpse.
    Matched MeSH terms: Cadaver
  2. Syed Mohd Daud SM, Heo CC, Mohd Yusof MYP, Khoo LS, Chainchel Singh MK, Mahmood MS, et al.
    J Forensic Sci, 2024 Mar;69(2):542-553.
    PMID: 38402526 DOI: 10.1111/1556-4029.15466
    Manual ground searches and cadaver dogs are traditional methods for locating remains, but they can be time- and resource-intensive, resulting in the decomposition of bodies and delay in victim identification. Therefore, thermal imaging has been proposed as a potentially useful tool for detecting remains based on their temperature. This study investigated the potential of a novel search technique of thermal drones to detect surface remains through the detection of maggot mass temperatures. Two trials were carried out at Selangor, Malaysia, each utilizing 12 healthy male Oryctolagus cuniculus European white rabbits and DJI Matrice 300 RTK drone China, equipped with a thermal camera; Zenmuse H20T to record the thermal imaging footage of the carcasses at various heights (15, 30, 60-100 m) for 14 days for each trial. Our results demonstrated that the larval masses and corresponding heat emissions were at their largest during the active decay stage; therefore, all the carcasses were observable in thermal images on day 5 and remained until day 7. Statistical analyses showed that (1) no statistically significant differences in thermal images between clothed and unclothed subjects (p > 0.05); (2) 15 m above ground level was proven to be the optimal height, as it showed the greatest contrast between the carcass heat signature and the background (p 
    Matched MeSH terms: Cadaver
  3. Wong LP, Tan SL, Alias H, Sia TE, Saw A
    Omega (Westport), 2023 Nov;88(1):157-170.
    PMID: 34490819 DOI: 10.1177/00302228211043613
    This study assessed death anxiety (Death Anxiety Questionnaire, DAQ) and psychophysical- (psychological and physical) symptom experience following cadaveric dissection among the Silent Mentor Program (SMP) participants before thawing (T1), after the suturing, dressing and coffining session (T2), and one month post-program (T3). There was a significant decline in the total DAQ score comparing T1 and T2 (t = 7.69, p 
    Matched MeSH terms: Cadaver*
  4. Wong LP, Alias H, Tan SL, Saw A
    Anat Sci Int, 2023 Sep;98(4):558-565.
    PMID: 37072599 DOI: 10.1007/s12565-023-00723-9
    The new coronavirus disease 2019 (COVID-19) has had a substantial impact on the Silent Mentor Programme (SMP), a programme in which members of the public may pledge their bodies to be used for medical training and research after their death. This study aimed to explore the conduct of body donations and simulation surgery training during the COVID-19 pandemic from the viewpoints of the committee members of the SMP and the next-of-kin of body donor pledgers. This study utilised a qualitative exploration method to seek an in-depth understanding of this phenomenon. In-depth individual interviews were carried out. Thematic analysis was used to identify patterns of themes. The COVID-19 polymerase chain reaction (RT-PCR) test is compulsory before accepting a body donation, and this resulted in the turning down of several donations. Being a donor is the final wish of pledgers and this turning down led to a negative emotional remorseful feeling in the next-of-kin of pledgers. From the perspective of students, it is feared that the conduct of the programme, particularly the home visit session being held online, has impeded teaching of humanistic values, compassion, and empathy, which is the prime philosophy of the programme. Previous to the pandemic, the programme ceremonies were well-attended, denoting the utmost respect and recognition of the mentors; however, travel restrictions due to the pandemic limiting in-person attendance resulted in ceremonies becoming less impactful. Continuous postponements of cadaveric dissection training also resulted in students missing training opportunities, hence potentially impairing their professional practice and humanistic values in the medical profession. Counselling interventions should be directed at easing the negative psychological impact on the next-of-kin of pledgers. As the COVID-19 pandemic may pose a significant impediment to achieving the educational outcomes of cadaveric dissection training, efforts to make up for these gaps are essential.
    Matched MeSH terms: Cadaver
  5. Ivorra T, Rahimi R, Zaini NA, Heo CC
    Leg Med (Tokyo), 2023 May;62:102238.
    PMID: 36913819 DOI: 10.1016/j.legalmed.2023.102238
    This case study reports on two unrecorded Coleopteran species found together on a human corpse in Malaysia. The mummified human remains were discovered in a house in Selangor, Malaysia. The pathologist confirmed that the death was due to a traumatic chest injury. Maggots, beetles, and fly pupal casings were found mainly on the front part of the body. Empty puparia of Diptera were collected during the autopsy and identified later as the muscid Synthesiomyia nudiseta (van der Wulp, 1883) (Diptera: Muscidae). Also, the insect evidence received included larvae and pupae of Megaselia sp. (Diptera: Phoridae). According to the insect development data, the minimum postmortem period was estimated by the time to reach the pupal developmental stage (in days). The entomological evidence included the first record of Dermestes maculatus De Geer, 1774 (Coleoptera: Dermestidae) and Necrobia rufipes (Fabricius, 1781) (Coleoptera: Cleridae), which have not previously been recorded on human remains in Malaysia.
    Matched MeSH terms: Cadaver
  6. Chakravarthi KK, Sarvepalli A, Siddegowda SK, Nelluri V
    Ann Afr Med, 2023;22(3):359-364.
    PMID: 37417026 DOI: 10.4103/aam.aam_93_22
    BACKGROUND: Biceps brachii is an elongated two-headed fusiform muscle of the anterior compartment of the arm which crosses the shoulder as well as the elbow joint. It assists in flexion of the shoulder joint and elbow joint and powerful supinator of the forearm. It also assists in the abduction of the shoulder joint. Accessory heads of biceps brachii muscle not only give additional strength to the joints, at the same time, they may also simulate soft-tissue tumors that can result in neurovascular compression.

    AIMS AND OBJECTIVES: Accordingly, the aim of this study was designed to evaluate the prevalence of accessory heads of biceps brachii muscle in human cadavers.

    MATERIALS AND METHODS: This study was conducted on 107 formalin embalmed human cadavers (male 62 and 45 female), and dissections were performed in accordance with the institutional ethical standards and the Indian Anatomy Act.

    RESULTS: Out of 107 cadavers, three-headed biceps brachii was noted in 18 cadavers (16.82%) associated with the unusual course of musculocutaneous nerve. Rare and unusual unilateral five-headed biceps brachii was noted in one male cadaver (0.93%). All accessory heads noted in this study were supplied by the separate branches of musculocutaneous nerve except the humeral head of five-headed biceps, which was supplied by the radial nerve.

    CONCLUSION: Awareness of these anatomical variations, knowledge is necessary for radiologists, anesthetists, physiotherapists, and orthopedic surgeons to avoid complications during various radiodiagnostic procedures or surgeries of flexor deformities of the upper arm and forearm.

    Matched MeSH terms: Cadaver
  7. Yang Harmony TC, Yusof N, Ramalingam S, Baharin R, Syahrom A, Mansor A
    Clin Orthop Relat Res, 2022 Feb 01;480(2):407-418.
    PMID: 34491235 DOI: 10.1097/CORR.0000000000001968
    BACKGROUND: Gamma irradiation, which minimizes the risk of infectious disease transmission when human bone allograft is used, has been found to negatively affect its biomechanical properties. However, in those studies, the deep-freezing temperature during irradiation was not necessarily maintained during transportation and sterilization, which may have affected the findings. Prior reports have also suggested that controlled deep freezing may mitigate the detrimental effects of irradiation on the mechanical properties of bone allograft.

    QUESTION/PURPOSE: Does a controlled deep-freezing temperature during irradiation help preserve the compressive mechanical properties of human femoral cortical bone allografts?

    METHODS: Cortical bone cube samples, each measuring 64 mm3, were cut from the mid-diaphyseal midshaft of five fresh-frozen cadaver femurs (four male donors, mean [range] age at procurement 42 years [42 to 43]) and were allocated via block randomization into one of three experimental groups (with equal numbers of samples from each donor allocated into each group). Each experimental group consisted of 20 bone cube samples. Samples irradiated in dry ice were subjected to irradiation doses ranging from 26.7 kGy to 27.1 kGy (mean 26.9 kGy) at a deep-freezing temperature below -40°C (the recommended long-term storage temperature for allografts). Samples irradiated in gel ice underwent irradiation doses ranging from 26.2 kGy and 26.4 kGy (mean 26.3 kGy) in a freezing temperature range between -40°C and 0°C. Acting as controls, samples in a third group were not subjected to gamma irradiation. The mechanical properties (0.2% offset yield stress, ultimate compression stress, toughness, and the Young modulus) of samples from each group were subsequently evaluated via axial compression loading to failure along the long axis of the bone. The investigators were blinded to sample group during compression testing.

    RESULTS: The mean ultimate compression stress (84 ± 27 MPa versus 119 ± 31 MPa, mean difference 35 [95% CI 9 to 60]; p = 0.005) and toughness (3622 ± 1720 kJ/m3 versus 5854 ± 2900 kJ/m3, mean difference 2232 [95% CI 70 to 4394]; p = 0.009) of samples irradiated at a higher temperature range (-40°C to 0°C) were lower than in those irradiated at deep-freezing temperatures (below -40°C). The mean 0.2% offset yield stress (73 ± 28 MPa versus 109 ± 38 MPa, mean difference 36 [95% CI 11 to 60]; p = 0.002) and ultimate compression stress (84 ± 27 MPa versus 128 ± 40 MPa, mean difference 44 [95% CI 17 to 69]; p < 0.001) of samples irradiated at a higher temperature range (-40°C to 0°C) were lower than the nonirradiated control group samples. The mean 0.2% offset yield stress (73 ± 28 MPa versus 101 ± 28 MPa, mean difference 28 [95% CI 3 to 52]; p = 0.02; effect size = 1.0 [95% CI 0.8 to 1.2]) of samples irradiated at higher temperature range (-40°C to 0°C) were no different with the numbers available to those irradiated at deep-freezing temperature. The mean toughness (3622 ± 1720 kJ/m3 versus 6231 ± 3410 kJ/m3, mean difference 2609 [95% CI 447 to 4771]; p = 0.02; effect size = 1.0 [95% CI 0.8 to 1.2]) of samples irradiated at higher temperature range (-40°C to 0°C) were no different with the numbers available to the non-irradiated control group samples. The mean 0.2% offset yield stress, ultimate compression stress, and toughness of samples irradiated in deep-freezing temperatures (below -40°C) were not different with the numbers available to the non-irradiated control group samples. The Young modulus was not different with the numbers available among the three groups.

    CONCLUSION: In this study, maintenance of a deep-freezing temperature below -40°C, using dry ice as a cooling agent, consistently mitigated the adverse effects of irradiation on the monotonic-compression mechanical properties of human cortical bone tissue. Preserving the mechanical properties of a cortical allograft, when irradiated in a deep-freezing temperature, may have resulted from attenuation of the deleterious, indirect effects of gamma radiation on its collagen architecture in a frozen state. Immobilization of water molecules in this state prevents radiolysis and the subsequent generation of free radicals. This hypothesis was supported by an apparent loss of the protective effect when a range of higher freezing temperatures was used during irradiation.

    CLINICAL RELEVANCE: Deep-freezing temperatures below -40°C during gamma irradiation may be a promising approach to better retain the native mechanical properties of cortical bone allografts. A further study of the effect of deep-freezing during gamma radiation sterilization on sterility and other important biomechanical properties of cortical bone (such as, tensile strength, fracture toughness, and fatigue) is needed to confirm these findings.

    Matched MeSH terms: Cadaver
  8. Ismail SMY, Murray CM, Olusa TAO, Ismail MM, Hailat NQ, Yen HH, et al.
    Anat Histol Embryol, 2022 Jan;51(1):143-152.
    PMID: 34882828 DOI: 10.1111/ahe.12771
    This study was conducted to describe the morphometrics of nuchal ligament and investigate the effects of different neck and body positions on the nuchal ligament in greyhounds. Nine adult greyhounds cadavers without any locomotion abnormalities were dissected through the neck musculature on the left side to expose the nuchal ligament. Three pins were placed to mark regions of interest on the nuchal ligament: at one cm cranial to the site of origin (the most dorsal point of the spinous process of the first thoracic vertebra), at the midpoint of the nuchal ligament and one cm caudal to the nuchal ligament site of insertion (close to the caudal aspect of the spinous process of the axis). Each cadaver was positioned on a masonite board and placed on a table on the floor in their lateral recumbency and seven different standardized body positions; P1-P7 were mimicked using goniometers and metal wires. Photographs were taken by positioning and fixing the camera above the nuchal ligament region. The length and widths (W1, W2 and W3) of nuchal ligament were measured using Image Pro software (Image-Pro Express version 5.0) on standardized photographs of each of seven different body and neck positions. The length of nuchal ligament in relation to the neutral position (P1) was less (- 7%, p > 0·05) in P6 (neck elevated) and increased in all other positions (+1%, p > 0·05 for P2, +19%, p  0·05 for P5, +40%, p 
    Matched MeSH terms: Cadaver
  9. Aithal Padur A, Kumar N, Lewis MG, Sekaran VC
    Surg Radiol Anat, 2021 Dec;43(12):2039-2046.
    PMID: 34570285 DOI: 10.1007/s00276-021-02837-z
    PURPOSE: Morphometric analysis of the patella and the patellar ligament is crucial in diagnosing and surgical corrections of knee injuries and patellofemoral joint disorders. Dimensions of the patella and the patellar ligament are frequently used in implant design and ACL reconstruction. This study aims to obtain detailed morphometric data on the patellar ligament and its localization based on gross anatomical dissections in the adult cadavers.

    METHODS: The present study consisted of 50 lower limbs from formalin-fixed male adult cadavers aged about 70 years (45-85) belonging to the South Indian population. Total length of the quadriceps tendon, patellar height, patellar ligament height, proximal width, distal width and thickness of the patellar ligament were measured meticulously. Mean, standard deviation, median scores of each parameter were computed for groups using SPSS 16.0. Level of significance was considered as p 

    Matched MeSH terms: Cadaver
  10. Heo CC, Teel PD, OConnor BM, Tomberlin JK
    Exp Appl Acarol, 2021 Dec;85(2-4):223-246.
    PMID: 34762225 DOI: 10.1007/s10493-021-00676-6
    Acari community structure and function associated with delayed pig carrion decomposition has not been examined. In this study, 18 swine carcasses were studied in central Texas, USA, during two consecutive summers (2013 and 2014). Samples of ca. 400 g soil were collected from beneath, aside, and 5 m away from each pig carcass over 180 days. Mites from soil samples were extracted using Berlese funnels and identified to order and family levels and classified according to ecological function. In total 1565 and 1740 mites were identified from the 2013 and 2014 soil samples, respectively. Significant differences were determined for mite community structure at order and family levels temporally on carrion (e.g., day 0 × day 14) regardless of treatments and between soil regions where mites were collected (e.g., soil beneath vs. soil 5 m away from carrion). However, no significant differences were found in mite community structure at the order level between pig carrion with and without delayed Diptera colonization (i.e., treatments). Analysis at the family level determined a significant difference across treatments for both summers. Ecological function of mites did not change significantly following the delayed decomposition of pig carcasses. However, detritivores and fungivores were significant indicator groups during the pig carrion decomposition process. Furthermore, 13 phoretic mite species associated with eight forensically important beetle species were documented. Data from this study indicated that the rate of nutrient flow into the soil impacted associated arthropod communities; however, detecting such shifts depends on the taxonomic resolution being applied.
    Matched MeSH terms: Cadaver
  11. Sermon A, Hofmann-Fliri L, Zderic I, Agarwal Y, Scherrer S, Weber A, et al.
    Medicina (Kaunas), 2021 Aug 28;57(9).
    PMID: 34577822 DOI: 10.3390/medicina57090899
    Background and Objectives: Hip fractures constitute the most debilitating complication of osteoporosis with steadily increasing incidences in the aging population. Their intramedullary nailing can be challenging because of poor anchorage in the osteoporotic femoral head. Cement augmentation of Proximal Femoral Nail Antirotation (PFNA) blades demonstrated promising results by enhancing cut-out resistance in proximal femoral fractures. The aim of this study was to assess the impact of augmentation on the fixation strength of TFN-ADVANCEDTM Proximal Femoral Nailing System (TFNA) blades and screws within the femoral head and compare its effect when they are implanted in centre or anteroposterior off-centre position. Materials and Methods: Eight groups were formed out of 96 polyurethane low-density foam specimens simulating isolated femoral heads with poor bone quality. The specimens in each group were implanted with either non-augmented or cement-augmented TFNA blades or screws in centre or anteroposterior off-centre positions, 7 mm anterior or posterior. Mechanical testing was performed under progressively increasing cyclic loading until failure, in setup simulating an unstable pertrochanteric fracture with a lack of posteromedial support and load sharing at the fracture gap. Varus-valgus and head rotation angles were monitored. A varus collapse of 5° or 10° head rotation was defined as a clinically relevant failure. Results: Failure load (N) for specimens with augmented TFNA head elements (screw/blade centre: 3799 ± 326/3228 ± 478; screw/blade off-centre: 2680 ± 182/2591 ± 244) was significantly higher compared with respective non-augmented specimens (screw/blade centre: 1593 ± 120/1489 ± 41; screw/blade off-centre: 515 ± 73/1018 ± 48), p < 0.001. For both non-augmented and augmented specimens failure load in the centre position was significantly higher compared with the respective off-centre positions, regardless of the head element type, p < 0.001. Augmented off-centre TFNA head elements had significantly higher failure load compared with non-augmented centrally placed implants, p < 0.001. Conclusions: Cement augmentation clearly enhances the fixation stability of TFNA blades and screws. Non-augmented blades outperformed screws in the anteroposterior off-centre position. Positioning of TFNA blades in the femoral head is more forgiving than TFNA screws in terms of failure load.
    Matched MeSH terms: Cadaver
  12. Nayak SB, Shetty SD
    Surg Radiol Anat, 2021 Aug;43(8):1327-1330.
    PMID: 33527215 DOI: 10.1007/s00276-021-02682-0
    Sternohyoid, sternothyroid, omohyoid, and thyrohyoid muscles are collectively known as infrahyoid muscles. These muscles frequently show variations in their attachments. Here, an extremely rare variant muscle belonging to this group has been presented. During cadaveric dissection for undergraduate medical students, an additional muscle was found between sternohyoid and superior belly of omohyoid muscles bilaterally in a male cadaver aged approximately 70 years. This muscle took its origin from posterior surface of the manubrium sterni, capsule of the sternoclavicular joint and the posterior surface of the medial part of the clavicle. It was inserted to the hyoid bone between the attachments of sternohyoid and superior belly of omohyoid muscles and was supplied by a branch of ansa cervicalis profunda. There is no report on such a muscle in the literature and it could be named as "sternocleidohyoid muscle". Knowledge of this muscle could be useful in neck surgeries.
    Matched MeSH terms: Cadaver
  13. Satheesha NB, Soumya KV
    Kathmandu Univ Med J (KUMJ), 2021 6 25;18(72):340-343.
    PMID: 34165088
    Background Gallstone disease (GSD) is one among the most prevalent diseases that affects approximately 10-15% of the population. It is associated with many other diseases like gallbladder cancer, renal stones, atherosclerosis, coronary heart disease and stroke. Objective Objective of this study is to document the prevalence of gallstones among south Indian cadavers. Method One hundred and twenty three South Indian cadaveric livers/gallbladders were observed for the presence of gallstones. The age range was 40 to 70 years. The gallbladders were palpated to know the presence of stones. They were then dissected and the stones were classified based on appearance. Gall bladder walls were also observed to know the associated fibrosis. Result Among the cadavers studied, 0.81% possessed cholesterol stones and 4.06% had pigment stones. Among the stones, 83.33% were pigment stones and 16.66% were cholesterol stones. Conclusion Compared to the western countries and north Indian studies, the prevalence of gallstone diseaseis low in the south Indian population (4.87%). The low prevalence was probably due to the low socioeconomic status and the diet and lifestyle.
    Matched MeSH terms: Cadaver
  14. Moore K, Prasad AM, Satheesha Nayak B
    Kathmandu Univ Med J (KUMJ), 2021 6 24;18(71):313-315.
    PMID: 34158443
    The musculocutaneous and median nerves frequently show variations from their normal course. The purpose of this paper is to report a rare variation, in which the right musculocutaneous nerve was absent. Consequently, the median nerve supplied motor innervation to the flexor compartment of the arm and sensory innervation to the lateral aspect of the forearm. The primary targets of this paper are orthopedic surgeons, anesthesiologists and radiologists. In cases of injuries to the upper limb, knowledge of these variations can assist them in avoiding misdiagnoses.
    Matched MeSH terms: Cadaver
  15. Azmiera N, Low VL, Heo CC
    Acta Parasitol, 2021 Jun;66(2):706-709.
    PMID: 33389626 DOI: 10.1007/s11686-020-00313-z
    INTRODUCTION: Psychoda sp. is often collected from patchy habitats such as sewers, drains and decomposing organic matters. The discovery of Psychoda sp. in forensic studies indicated that it might have noteworthy value in assisting death investigations.

    PURPOSE: This study reports on the first finding of Psychoda larvae collected from decomposing rabbit carcasses placed in Cameron Highlands, Pahang, Malaysia.

    METHODS: The larvae were first observed on rabbit carcasses and were collected using tweezers and carefully preserved in 70% ethanol. They were subsequently mounted on microscopy slides using Hoyer's medium and identified as Psychoda sp. morphologically. The identification was also confirmed through a DNA barcoding analysis.

    RESULTS: Psychoda sp. larvae were collected on day-10 post-mortem where the rabbit carcasses were at the advanced decay stage of decomposition. The cytochrome c oxidase I (COI) gene sequences of the larvae had 90% similarity with the Psychoda spp. in the database.

    CONCLUSION: The finding of these larvae on carrion may provide additional valuable insights into forensic entomology and may assist in death investigations.

    Matched MeSH terms: Cadaver
  16. Nayak SB, Shetty SD
    Surg Radiol Anat, 2021 Mar;43(3):413-416.
    PMID: 33231750 DOI: 10.1007/s00276-020-02619-z
    Knowledge of variations of the internal carotid artery is significant to surgeons and radiologists. The internal carotid artery normally runs a straight course in the neck. Its anomalies can lead to its iatrogenic injuries. We report a case of a large loop of the internal carotid artery in a male cadaver aged about 75 years. The common carotid artery terminated by dividing it into the external carotid artery and internal carotid arteries at the level of the upper border of the thyroid cartilage. From the level of origin, the internal carotid artery coursed upwards, backwards and laterally, and formed a large loop behind the internal jugular vein. The variation was found on the left side of the neck and was unilateral. The uncommon looping of the internal carotid artery might result in altered blood flow to the brain and may lead to misperceptions in surgical, imaging, and invasive procedures.
    Matched MeSH terms: Cadaver
  17. Zyoud TYT, Abdul Rashid SN, Suppiah S, Mahmud R, Kabeer A, Abd Manaf R, et al.
    Malays J Pathol, 2020 Dec;42(3):423-431.
    PMID: 33361724
    INTRODUCTION: Post-mortem computed tomography (PMCT) provides information that helps in the determination of the cause of death and corpse identification of disaster victims. One of the methods for corpse identification includes assessment of the body stature. There is a lack of post-mortem imaging studies that focus on the anthropometric assessment of corpses. Our aim was to identify the relationship between cadaveric spine length and autopsy length (AL) among and autopsy length (AL) among a Malaysian population and derive a regression formula for the estimation of corpse body height using PMCT.

    MATERIALS AND METHODS: We retrospectively assessed 107 cadavers that had undergone conventional autopsy and PMCT. We made 5 measurements from the PMCT that included cervical length (CL), thoracic length (TL), lumbosacral length (LS), total column length of the spine, excluding the sacrum and coccyx (TCL), and ellipse line measurement of the whole spine, excluding the sacrum and coccyx (EL). We compared these anthropometric PMCT measurements with AL and correlated them using linear regression analysis.

    RESULTS: The results showed a significant linear relationship existed between TL and LS with AL, which was higher in comparison with the other parameters than the rest of the spine parameters. The linear regression formula derived was: 48.163 + 2.458 (TL) + 2.246 (LS).

    CONCLUSIONS: The linear regression formula derived from PMCT spine length parameters particularly thoracic and lumbar spine gave a finer correlation with autopsy body length and can be used for accurate estimation of cadaveric height. To the best of our knowledge, this is the first ever linear regression formula for cadaveric height assessment using only post mortem CT spine length measurements.

    Matched MeSH terms: Cadaver*
  18. Singh S, Yong SK, Jalaludin NH, Brau E, Shamsudin NN, Keawbaingam N, et al.
    Trop Biomed, 2020 Dec 01;37(4):1146-1151.
    PMID: 33612767 DOI: 10.47665/tb.37.4.1146
    The immature stages of necrophagous insects such as Diptera and Coleoptera play a vital ecological role in carrion decomposition. These invertebrates reduce the necromass significantly through consumption and recycle nutrients into organic forms which are readily being used by autotrophs or served as an abiotic storage in the soil ecosystem. Fly and beetle larvae are frequently encountered decomposers on ephemeral resource patches; however, lepidopterans associated with carrion decomposition is seldom reported. Here, we report colonization of Monopis sp. (Tineidae) and an unknown species of Psychidae on a rat carcass, and a Lithosiini caterpillar (Arctiidae) on a rabbit carcass in Peninsular Malaysia for the first time. The feeding behaviour and their potential forensic implications are discussed.
    Matched MeSH terms: Cadaver
  19. Kamath SU, Agarwal S, Austine J
    Malays Orthop J, 2020 Nov;14(3):143-150.
    PMID: 33403075 DOI: 10.5704/MOJ.2011.022
    Introduction: With a higher proportion of young individuals undergoing uncemented hip arthroplasty, a close match in the dimension of the proximal femur and the implanted prosthesis is paramount. This is a study to gain insight into geographical variation in proximal femur morphology to determine the reference values to design uncemented femoral stems for a south Indian population, and also the effect of ageing and gender on the proximal femur morphology.

    Materials and Methods: The study comprised of two groups. For the first group, 50 unpaired dry femur bones were obtained from adult human cadavers; and the second group was a clinical group of 50 adult patients. Standardised radiographic techniques were used to measure the extra-cortical and intra-cortical morphometric parameters. Based on these, dimensionless ratios were calculated to express the shape of the proximal femur. The data were expressed in terms of mean and standard deviation and a comparison made with other studies.

    Results: A significant difference was noted across various population subsets within the Indian subcontinent and also in comparison to the Western population, suggestive of regional variation. The measurements made in cadaveric bone differed significantly from those in live patients, especially the femoral head diameter and extra-cortical and intra-cortical width. Femoral offset, head height and diameter were significantly less in females.

    Conclusion: The south Indian population needs customised implants with an increase in neck shaft angle and a decrease in intra-cortical and extra-cortical width for press fit in hip arthroplasty. The variation between the two sexes must also be accounted for during prosthesis design.

    Matched MeSH terms: Cadaver
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links