Displaying all 8 publications

Abstract:
Sort:
  1. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Eur Phys J C Part Fields, 2019;79(5):444.
    PMID: 31265003 DOI: 10.1140/epjc/s10052-019-6926-x
    A search for supersymmetry is presented based on events with at least one photon, jets, and large missing transverse momentum produced in proton-proton collisions at a center-of-mass energy of 13



    Te



    . The data correspond to an integrated luminosity of 35.9



    fb

    -
    1



    and were recorded at the LHC with the CMS detector in 2016. The analysis characterizes signal-like events by categorizing the data into various signal regions based on the number of jets, the number of
    b
    -tagged jets, and the missing transverse momentum. No significant excess of events is observed with respect to the expectations from standard model processes. Limits are placed on the gluino and top squark pair production cross sections using several simplified models of supersymmetric particle production with gauge-mediated supersymmetry breaking. Depending on the model and the mass of the next-to-lightest supersymmetric particle, the production of gluinos with masses as large as 2120



    Ge



    and the production of top squarks with masses as large as 1230



    Ge



    are excluded at 95% confidence level.
  2. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Bergauer T, Brandstetter J, et al.
    Phys Rev Lett, 2019 Sep 27;123(13):131802.
    PMID: 31697516 DOI: 10.1103/PhysRevLett.123.131802
    A search for a light charged Higgs boson (H^{+}) decaying to a W boson and a CP-odd Higgs boson (A) in final states with eμμ or μμμ is performed using data from pp collisions at sqrt[s]=13  TeV, recorded by the CMS detector at the LHC and corresponding to an integrated luminosity of 35.9  fb^{-1}. In this search, it is assumed that the H^{+} boson is produced in decays of top quarks, and the A boson decays to two oppositely charged muons. The presence of signals for H^{+} boson masses between 100 and 160 GeV and A boson masses between 15 and 75 GeV is investigated. No evidence for the production of the H^{+} boson is found. Upper limits at 95% confidence level are obtained on the combined branching fraction for the decay chain, t→bH^{+}→bW^{+}A→bW^{+}μ^{+}μ^{-}, of 1.9×10^{-6} to 8.6×10^{-6}, depending on the masses of the H^{+} and A bosons. These are the first limits for these decay modes of the H^{+} and A bosons.
  3. Qadir D, Idris A, Nasir R, Abdul Mannan H, Sharif R, Mukhtar H
    Chemosphere, 2023 Jan;311(Pt 1):136987.
    PMID: 36306961 DOI: 10.1016/j.chemosphere.2022.136987
    This study explains the modeling of synthesized membranes using the Donnan Steric Pore model (DSPM) based on the Extended Nernst Planck Equation (ENP). Conventionally, structural parameters required to predict the performance of the membranes were determined through tedious experimentation, which in this study are found using a new MATLAB technique. A MATLAB program is used to determine the unknown structural parameters such as effective charge density (Xd), effective pore radius (rp), and effective membrane thickness to porosity ratio (Δx/Ak) by using the single solute rejection and permeation data. It was found that the model predicted the rejection of studied membranes accurately, with the E5C1 membrane exceeding the others (E5, E5C5) for rejection of single and divalent salt's aqueous solutions. The rejection of 100 ppm aqueous solution of NaCl for E5C1 was around 60%, whereas, for an aqueous solution of 100 ppm, CaCl2 rejection reached up to 80% at 10 bar feed pressure. The trend of salt rejection for all three membranes was found to be in the following order: E5C1 > E5C5 > E5, confirming that their structural parameters-controlled ion transport in these membranes. The structural parameters, such as effective pore radius, effective membrane thickness to porosity ratio, and effective charge density for the best performing membrane, i.e., E5C1, were determined to be 0.5 nm, 16 μm, and -6.04 mol/m3,respectively. Finally, it can be asserted that this method can be used to predict the real performance of membranes by significantly reducing the number of experiments previously required for the predictive modeling of nanofiltration-type membranes.
  4. Ramli ZAC, Kamarudin SK
    Nanoscale Res Lett, 2018 Dec 22;13(1):410.
    PMID: 30578446 DOI: 10.1186/s11671-018-2799-4
    Platinum (Pt)-based nanoparticle metals have received a substantial amount of attention and are the most popular catalysts for direct methanol fuel cell (DMFC). However, the high cost of Pt catalysts, slow kinetic oxidation, and the formation of CO intermediate molecules during the methanol oxidation reaction (MOR) are major challenges associate with single-metal Pt catalysts. Recent studies are focusing on using either Pt alloys, such as Fe, Ni, Co, Rh, Ru, Co, and Sn metals, or carbon support materials to enhance the catalytic performance of Pt. In recent years, Pt and Pt alloy catalysts supported on great potential of carbon materials such as MWCNT, CNF, CNT, CNC, CMS, CNT, CB, and graphene have received remarkable interests due to their significant properties that can contribute to the excellent MOR and DMFC performance. This review paper summaries the development of the above alloys and support materials related to reduce the usage of Pt, improve stability, and better electrocatalytic performance of Pt in DMFC. Finally, discussion of each catalyst and support in terms of morphology, electrocatalytic activity, structural characteristics, and its fuel cell performance are presented.
  5. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Eur Phys J C Part Fields, 2019;79(2):90.
    PMID: 30814908 DOI: 10.1140/epjc/s10052-019-6556-3
    A search is presented for the single production of vector-like quarks in proton-proton collisions at


    s

    =
    13

    TeV

    . The data, corresponding to an integrated luminosity of 35.9



    fb

    -
    1



    , were recorded with the CMS experiment at the LHC. The analysis focuses on the vector-like quark decay into a top quark and a
    W
    boson, with one muon or electron in the final state. The mass of the vector-like quark candidate is reconstructed from hadronic jets, the lepton, and the missing transverse momentum. Methods for the identification of
    b
    quarks and of highly Lorentz boosted hadronically decaying top quarks and
    W
    bosons are exploited in this search. No significant deviation from the standard model background expectation is observed. Exclusion limits at 95% confidence level are set on the product of the production cross section and branching fraction as a function of the vector-like quark mass, which range from 0.3 to 0.03


    pb

    for vector-like quark masses of 700 to 2000


    GeV

    . Mass exclusion limits up to 1660


    GeV

    are obtained, depending on the vector-like quark type, coupling, and decay width. These represent the most stringent exclusion limits for the single production of vector-like quarks in this channel.
  6. Mohammed BS, Haruna S, Wahab MMA, Liew MS, Haruna A
    Heliyon, 2019 Sep;5(9):e02255.
    PMID: 31687531 DOI: 10.1016/j.heliyon.2019.e02255
    In this present experimental study, geopolymer cement is developed using high calcium fly ash and used in the production of one-part alkali-activated binders. At 8-16 percent of the total precursor materials, the HCFA was activated with anhydrous sodium metasilicate powder and cured in ambient condition. Five mixtures of one-part geopolymer paste were intended at a steady w/b proportion. Density, flowability, setting time, compressive strength, splitting tensile strength and molar ratio impact were envisaged. It was observed that the setting time of the designed one-part geopolymer paste decreases with higher activator content. The experimental findings showed that the resistance of one-part geopolymer cement paste increases with comparatively greater activator content. However, raising the granular activator beyond 12 percent by fly ash weight decreases the strength and workability of the established one-part geopolymer cement. The optimum mix by weight of the fly ash was discovered to be 12 percent (i.e. 6 percent Na2O). At 28 days of curing, one-part alkali-activated paste recorded the greatest compressive strength of almost 50 MPa. The density of the one-part geopolymer paste is nearly the same regardless of the mixes. Microstructural assessment by FESEM, FTIR and XRD has shown that the established geopolymer paste includes quartz, pyrrhotite, aluminosilicate sodium and hydrate gels of calcium aluminosilicate. Based on the experimental information acquired, it can be deduced that the strength growth of one-part geopolymer cement is similar to that of Portland cement.
  7. Raihan R, Tabassum S, Al-Mahtab M, Nessa A, Jahan M, Shamim Kabir CM, et al.
    Euroasian J Hepatogastroenterol, 2015 Jan-Jun;5(1):7-10.
    PMID: 29201677 DOI: 10.5005/jp-journals-10018-1120
    Background: Hepatitis B virus (HBV) infection has many faces. Precore and core promoter mutants resemble inactive carrier status. The identification of hepatitis B core antigen (HBcAg) in hepatocytes may have variable clinical significance. The present study was undertaken to detect HBcAg in chronic hepatitis B (CHB) patients and to assess the efficacy of detection system by indirect immunofluorescence (IIF) and indirect immunoperoxidase (IIP).

    Materials and methods: The study was done in 70 chronic HBV-infected patients. Out of 70 patients, eight (11.4%) were hepatitis B e antigen (HBeAg) positive and 62 (88.57%) were HBeAg negative. Hepatitis B core antigen was detected by indirect immunofluorescence (IIF) and indirect immunoperoxidase (IIP) methods in liver tissue.

    Results: All HBeAg positive patients expressed HBcAg by both IIF and IIP methods. Out of 62 patients with HBeAg-negative CHB, HBcAg was detected by IIF in 55 (88.7%) patients and by IIP in 51 (82.26%) patients. A positive relation among viral load and HBcAg detection was also found. This was more evident in the case of HBeAg negative patients and showed a positive relation with HBV DNA levels.

    Conclusion: Hepatitis B core antigen can be detected using the IIF from formalin fixed paraffin block preparation and also by IIP method. This seems to reflect the magnitudes of HBV replication in CHB.

    How to cite this article: Raihan R, Tabassum S, Al-Mahtab M, Nessa A, Jahan M, Kabir CMS, Kamal M, Aguilar JC. Hepatitis B Core Antigen in Hepatocytes of Chronic Hepatitis B: Comparison between Indirect Immunofluorescence and Immunoperoxidase Method. Euroasian J Hepato-Gastroenterol 2015;5(1):7-10.
  8. Deris ZZ
    Malays J Med Sci, 2015 Sep;22(5):1-6.
    PMID: 28239263
    The global emergence and dissemination of multidrug-resistant Gram-negative superbugs, particularly carbapenem-resistant Acinetobacter baumannii and Klebsiella pneumoniae, lead to the limited effectiveness of antibiotics for treating nosocomial infections. In most cases, polymyxins are the last resort therapy, and these antibiotics must be used intelligently to prolong their efficacy in clinical practice. Polymyxin B and colistin (polymyxin E) were introduced prior to modern drug regulation, and the majority of the 'old' drug information is unreliable. Recent pharmacokinetic data do not support the renal dose adjustment of intravenous (IV) polymyxin B as suggested by the manufacturer, and this drug must be scaled by the total body weight. Whereas IV colistin is formulated as an inactive prodrug, colistin methanesulfonate (CMS) has different pharmacokinetic profiles than polymyxin B. To achieve maximum efficacy, CMS should be administered as a loading dose scaled to body weight and a maintenance dose according to the renal profiles. Polymyxin combination therapy is suggested due to a sub-therapeutic plasma concentration in a significant proportion of patients and a high incidence of polymyxin hetero-resistance among Gram-negative superbugs. In conclusion, polymyxins must be reserved as a last resort and should be wisely used when truly indicated.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links