Displaying publications 1 - 20 of 102 in total

Abstract:
Sort:
  1. Au Jee Yuan, Faridah Yahya
    MyJurnal
    The aim of this study was to determine the effect of different ratios of low protein flour to oyster mushroom (Pleurotus sajor-caju) powder on the physicochemical properties and sensory acceptability of edible tablespoon. Fresh grey oyster mushroom was dried in a convection oven at temperature of 55.0˚C ± 2.0˚C for 20 h prior to the grinding process. The low protein flour (LPF) was then incorporated with oyster mushroom powder (OMP) at different ratios of 100:0, 96:4, 92:8, 88:12 and 84:16, before being with vegetable oil, sugar, egg white and water in formulating the edible tablespoon. The proximate analyses were carried out in triplicate for calorie content, colour profile, hardness value and morphological structure of edible tablespoon. This study revealed that with decreasing LPF and increasing OMP in the formulation, the ash content (1.24% to 1.92%), crude fat content (8.98% to 10.40%) and fiber content (0.13% to 1.24%) were observed to have increased as well as the hardness value (2042.03g to 2844.57g) and pore’s size of the morphological structure of edible tablespoon. However, the carbohydrate content (78.64% to 75.56%) significantly decreased (p>0.05) together with L* value (from 68.47 to 61.71) when the decrease was in the the percentage of LPF and an increase the percentage of OMP. The calorie content, moisture content and protein content of edible tablespoon were not significantly (p>0.05) affected by different ratios of LPF to OMP. The edible tablespoon formulated with up to 8% of OMP was accepted by the sensory panelists but further increase in OMP addition significantly decreased the degree of likeness in terms of colour, odour, taste and overall acceptability of edible tablespoon. This study suggested that oyster mushroom edible tablespoon could be potential alternative disposable cutlery which will help to reduce the use of huge amount of non-biodegradable materials for environmental conservation.
    Matched MeSH terms: Flour
  2. Ramli S, Ismail N, Alkarkhi AF, Easa AM
    Trop Life Sci Res, 2010 Aug;21(1):91-100.
    PMID: 24575193 MyJurnal
    Banana peel flour (BPF) prepared from green or ripe Cavendish and Dream banana fruits were assessed for their total starch (TS), digestible starch (DS), resistant starch (RS), total dietary fibre (TDF), soluble dietary fibre (SDF) and insoluble dietary fibre (IDF). Principal component analysis (PCA) identified that only 1 component was responsible for 93.74% of the total variance in the starch and dietary fibre components that differentiated ripe and green banana flours. Cluster analysis (CA) applied to similar data obtained two statistically significant clusters (green and ripe bananas) to indicate difference in behaviours according to the stages of ripeness based on starch and dietary fibre components. We concluded that the starch and dietary fibre components could be used to discriminate between flours prepared from peels obtained from fruits of different ripeness. The results were also suggestive of the potential of green and ripe BPF as functional ingredients in food.
    Matched MeSH terms: Flour
  3. Felli R, Yang TA, Abdullah WNW, Zzaman W
    Trop Life Sci Res, 2018 Mar;29(1):113-126.
    PMID: 29644019 MyJurnal DOI: 10.21315/tlsr2018.29.1.8
    Nowadays, there is a rising interest towards consuming health beneficial food products. Bread-as one of the most popular food products-could be improved to 'healthy bread' by addition of ingredients high in protein, dietary fiber and low in calorie. Incorporating Jackfruit rind powder (JRP) as a by-product rich in dietary fiber in bread, could not only provide health beneficial bread products, but also lead to develop an environmental friendly technology by solving the problem of waste disposal of residues. In this study, addition of jackfruit rind powder (JRP) as a high dietary fiber and functional ingredient in bread was examined. The results showed that incorporation of JRP in bread improved functional properties of flour such as Oil Holding Capacity (OHC), Water Holding Capacity (WHC) and pasting properties. Addition of 5%, 10% and 15% of JRP in wheat flour caused significantly (p < 0.05) higher insoluble, soluble and total dietary fiber in flour and bread products. Results from proximate composition indicated that all breads substituted with JRP, contained significantly (p < 0.05) higher fiber, moisture and fat. Obtained results confirmed that the JRP has great potential in development of functional foods especially functional bread products.
    Matched MeSH terms: Flour
  4. LAURA DINES NGAU, BOON SIONG WEE, NAZARATUL ASHIFA ABD SALIM
    MyJurnal
    Trace elements play a significant role in giving nutritional benefits to the body because they act as essential cofactors for all physiological processes. However, there are some trace elements which may bring more harm than good when entering the human body. Due to its ability to incorporate trace elements in an amount that is proportional to an individual’s dietary intake and environmental exposure, human fingernails are suitable biomarkers in assessing the health status of an individual as they reflect on the trace element concentration present in the body. This study has analysed fingernail samples of 23 adult females residing in Kuching and Kota Samarahan, Sarawak, Malaysia for four elements, namely Cd, Cu, Pb and Zn. By using flame atomic absorption spectroscopy (FAAS), the mean elemental concentrations found in fingernail samples of research participants were 171.8 ± 33.8 μg/g for Zn, 27.8 ± 14.8 μg/g for Cu and 2.64 ± 0.94 μg/g for Pb. Cd concentrations were not able to be detected as they were below the detection limits. A standard reference material, NIST 1568b Rice Flour was used to verify the methods used in elemental analysis using FAAS. Independent t-test which was used to compare the means of Zn and Cu between vegetarians and non-vegetarians showed no significant differences for both elements. Moreover, correlation analysis showed negative correlations between Cu/Zn pair and Pb/Zn pair, whereas significant positive correlation was obtained for Cu/Pb pair. The overall data from this study showed good agreements with data obtained from studies in other countries. Therefore, the current data in this study represents the latest background elemental concentrations in fingernails of the residents in Kuching and Kota Samarahan, Sarawak.
    Matched MeSH terms: Flour
  5. Gholami M, Behkami S, Zain SM, Bakirdere S
    Sci Rep, 2016 11 17;6:37186.
    PMID: 27853264 DOI: 10.1038/srep37186
    The objective of this work is to prepare a cost-effective, low reagent consumption and high performance polytetrafluoroethylene (PTFE) vessel that is capable to work in domestic microwave for digesting food and environmental samples. The designed vessel has a relatively thicker wall compared to that of commercial vessels. In this design, eight vessels are placed in an acrylonitrile butadiene styrene (ABS) holder to keep them safe and stable. This vessel needs only 2.0 mL of HNO3 and 1.0 mL H2O2 to digest 100 mg of biological sample. The performance of this design is then evaluated with an ICP-MS instrument in the analysis of the several NIST standard reference material of milk 1849a, rice flour 1568b, spinach leave 1570a and Peach Leaves 1547 in a domestic microwave oven with inverter technology. Outstanding agreement to (SRM) values are observed by using the suggested power to time microwave program, which simulates the reflux action occurring in this closed vessel. Taking into account the high cost of commercial microwave vessels and the volume of chemicals needed for various experiments (8-10 mL), this simple vessel is cost effective and suitable for digesting food and environmental samples.
    Matched MeSH terms: Flour
  6. Shahril Anuar Bahari, Kamrie Kamlon, Masitah Abu Kassim
    MyJurnal
    In this study, the rice husk flour-plastic waste composites (RPC) was produced from polypropylene (PP) and high density polyethylene (HDPE) wastes with 30 and 50% rice husk flour (RHF) contents. RPC was made by melt compounding and compression moulding processes. The electrical resistivity, thermal stability and tensile strength of RPC were determined. The RPC was tested in electrical resistivity and tensile strength according to the ASTM D-257 and ASTM D-638 respectively, while thermal stability was tested using thermogravimetric analysis (TGA) method. From the results, high content of RHF reduces all properties, except for tensile modulus of elasticity (TMOE) in tensile strength test. The ability of moisture absorption and the presence of hemicelluloses, cellulose and silica in RHF reduce the electrical resistivity and thermal stability behaviour of RPC from 50% RHF. The good binding elements and filler agglomeration in RPC from 50% RHF improve only TMOE. Insufficient stress transfer and rigid interphase occurred between RHF and plastics during tensile maximum load and elongation at break (Eb) in tensile strength test. In general, RPC from HDPE indicates better thermal stability, tensile modulus of rupture and Eb (in tensile strength test) compared to PP, based on the good behaviour of thermal conductivity, low water absorption, high molecular weight and good elongation properties of HDPE. However, RPC from PP shows good electrical resistance due to the low thermal expansion coefficient of PP.
    Matched MeSH terms: Flour
  7. Wan Rosli W. I., Chow Y
    Sains Malaysiana, 2014;43:1503-1508.
    Sufficient intakes of functional foods containing significant amount of dietary fibre in daily diet are beneficial to human health especially in preventing the prevalence of non-communicable diseases (NCDs). In this study, young corn powder (YCP) was added into Malaysian star cake (Baulu Cermai) to replace wheat flour (WF) partially at the formulations of 5, 10 and 15%. Baulu Cermai with 100% WF and 0% YCP was used as the control. The aim of the present study was to evaluate the effects of YCP addition on the nutritional composition, textural properties and sensory attributes of Baulu Cermai. The results showed that the mean values of moisture, ash, fat and protein content of Baulu Cermai increased in line with the levels of YCP incorporation. In addition, the total dietary fibre (TDF) content was increased proportionally with the increasing levels of YCP added into Baulu Cermai. Addition of YCP did not show any predictable trend in all the textural properties of Baulu Cermai. Meanwhile, the aroma, chewiness and tenderness increased in parallel with the increasing percentages of YCP added in the formulated products. Baulu Cermai added with 10% of YCP showed the highest score of overall acceptance. Addition of YCP at 10% into Baulu Cermai increases moisture, ash, fat, protein and total dietary fibre content without significantly affecting the textural properties and the sensory attributes of Baulu Cermai. Addition of YCP at 5% to replace WF partially in Baulu Cermai resulted in slight improvement of TDF and fat but does not affected moisture, ash, protein content and acceptability of the consumers.
    Matched MeSH terms: Flour
  8. Anis Jauharah M, Wan Rosli W, Daniel Robert S
    Sains Malaysiana, 2014;43:45-52.
    Various types of natural fibre-rich ingredients are added into bakery-based products to improve their fibre content for health promotional purposes. However, most of these products are frequently added with imported dietary fibre ingredients. The aim of this study was to develop bakery products incorporated with young corn powder (YCP) and to evaluate the effects on physicochemical properties and sensory acceptabilities. Dried young corn was used to substitute wheat flour in biscuit and muffin formulations at different levels (0, 10, 20 and 30%). The effects of YCP incorporation on proximate compositions, physical characteristics, texture profile and sensory evaluation of both bakery products were investigated. The present results showed that YCP had significantly increased protein and total dietary fibre contents of both biscuit and muffin. Hardness attribute of both products increased in line with the level of YCP addition. Interestingly, biscuit and muffin containing 10% YCP received better score than the control and other formulations for most of the sensorial attributes judged. In conclusion, YCP can be potentially be used as an alternative functional ingredient for partial replacement of wheat flour in formulating biscuit and muffin because of its ability to improve the nutritional quality without jeopardizing sensorial palatability.
    Matched MeSH terms: Flour
  9. Mohd Afandi P. Mohammed
    Sains Malaysiana, 2014;43:451-457.
    This paper investigates the application of visco-hyperelastic model to soft rubberlike material, that is gluten. Gluten is a major protein in wheat flour dough (a mixture of flour and water) which exists as long network fibers and undergo large deformation under uniaxial tension and compression. The visco-hyperelastic model is represented by a combination of the viscoelastic Prony series and the hyperelastic extended tube model. Calibration of the visco-hyperelastic model to gluten tests result suggests that gluten can be modelled as a finite viscoelastic material.
    Matched MeSH terms: Flour
  10. Uthumporn U, Nadiah I, Izzuddin I, Cheng LH, Aida H
    Sains Malaysiana, 2017;46:223-229.
    This research mainly focused on isolation of non-starch polysaccharide (NSP) from different parts of cassava tuber by using water extraction and to evaluate the effect of NSP addition into flour on nutritional composition, swelling and solubility, pasting properties and dough characteristics by farinograph and extensograph. Three origins of (NSP) extracted were used: cassava peels, coarse and fine portions from cassava flesh. The isolation of NSP was done by using water extraction method and designated as water-extractable (WEP) and water un-extractable non starch polysaccharides (WUP). The percentage yield of WEP (0.24 - 1.64%) from water extraction was significantly lower as compared to WUP (2.58 - 4.33%). Upon the incorporation of 5% NSP, the cassava flour showed lower moisture content compared to the sample without the addition of NSP, while fats and crude fiber content of cassava flours were found to be increased upon the incorporation of 5% NSP from all origins. Swelling power and solubility of cassava flour were being reduced upon the incorporation of 5% of NSP from cassava peel and coarse portion of cassava flesh. The changes in dough characteristics showed that water absorption of the samples upon the addition of 5% NSP into wheat flour was found to be higher compared to control wheat flour. In contrast, dough stability and extensibility, tolerance index, resistance to extension, as well as the work input necessary for dough deformation from wheat flour with addition of 5% NSP resulted lower than control wheat flour. Overall, NSP extracted from cassava peels and coarse portion of cassava flesh performed similar characteristics and functional properties upon the incorporation into the flour.
    Matched MeSH terms: Flour
  11. Samson DO, Jafri MZM, Shukri A, Hashim R, Sulaiman O, Aziz MZA, et al.
    Radiat Environ Biophys, 2020 08;59(3):483-501.
    PMID: 32333105 DOI: 10.1007/s00411-020-00844-z
    For the first time, Rhizophora spp. (Rh. spp.) particleboard phantoms were developed using defatted soy flour (DSF) and soy protein isolate (SPI) modified by sodium hydroxide and itaconic acid polyamidoamine-epichlorohydrin (IA-PAE) adhesive. The microstructural characterization and X-ray diffraction patterns of the material revealed that the modified DSF and SPI adhesives became more compact and homogeneous when NaOH/IA-PAE was added, which prevented damage by moisture. It was confirmed that the composite is crystalline with (101), (002), and (004) orientations. Phantoms made of this material were scanned with X-ray computed tomography (CT) typically used for abdominal examinations with varying energies corresponding to 80, 120, and 135 kVp, to determine CT numbers, electron densities, and density distribution profiles. The radiation attenuation parameters were found to be not significantly different from those of water (XCOM) with p values [Formula: see text] 0.05 for DSF and SPI. The DSF- and SPI-based particleboard phantoms showed CT numbers close to those of water at the three X-ray CT energies. In addition, electron density and density distribution profiles of DSF-SPI-Rh. spp. particleboard phantoms with 15 wt% IA-PAE content were even closer to those of water and other commercial phantom materials at the three X-ray CT energies. It is concluded that DSF-SPI with NaOH/IA-PAE added can be used as a potential adhesive in Rh. spp. particleboard phantoms for radiation dosimetry.
    Matched MeSH terms: Flour*
  12. Jirapa P, Normah H, Zamaliah MM, Asmah R, Mohamad K
    Plant Foods Hum Nutr, 2001;56(3):203-16.
    PMID: 11442221
    Amino acid profiles, protein digestibility, corrected amino acid scores (PDCAAS), chemical scores, essential amino acid indexes, and calculated biological values of controlcowpea flour (CCF), germinated cowpea flour (GCF) prepared from cowpeas germinated at 25 degrees C for either 24 h or 48 h and weaning foods prepared from cowpea flours were determined. Locally available rice, cowpea flour, banana-pumpkin slurry, and skim milk powder and sucrose in the ratio 35:35:15:15:5 were used to formulate weaning food containing not less than 15% protein. The ingredients were cooked into a slurry and oven-dried to produce flakes. The nutritional and sensory qualities of the weaning products were evaluated. Germination had little effect on the amino acid profile of cowpeas. In vitro protein quality and starch digestibility were improved in germinated cowpea flour. The PDCAAS of 24 h germinated cowpea flour (GCF) weaning food was higher (55.49%) than CCF-weaning food (46.74%). Vitamin A activity in 24 h GCF weaning food was higher than in CCF-weaning food. In vitro starch digestibilities of 24 h GCF and 48 h GCF-weaning foods were higher than that of CCF weaning food. The 24 h GCF-weaning food which had a higher overall acceptability score by sensory panelist than 48 h GCF and CCF-weaning food is recommended for household consumption.
    Matched MeSH terms: Flour/analysis*
  13. Abd Elgadir M, Akanda MJ, Ferdosh S, Mehrnoush A, Karim AA, Noda T, et al.
    Molecules, 2012 Jan 09;17(1):584-97.
    PMID: 22231495 DOI: 10.3390/molecules17010584
    A binary mixture of starch-starch or starch with other biopolymers such as protein and non-starch polysaccharides could provide a new approach in producing starch-based food products. In the context of food processing, a specific adjustment in the rheological properties plays an important role in regulating production processing and optimizing the applicability, stability, and sensory of the final food products. This review examines various biopolymer mixtures based on starch and the influence of their interaction on physicochemical and rheological properties of the starch-based foods. It is evident that the physicochemical and rheological characteristics of the biopolymers mixture are highly dependent on the type of starch and other biopolymers that make them up mixing ratios, mixing procedure and presence of other food ingredients in the mixture. Understanding these properties will lead to improve the formulation of starch-based foods and minimize the need to resort to chemically modified starch.
    Matched MeSH terms: Flour
  14. Gammoh S, Alu'datt MH, Alhamad MN, Tranchant CC, Rababah T, Al-U'datt D, et al.
    Molecules, 2023 Aug 11;28(16).
    PMID: 37630264 DOI: 10.3390/molecules28166012
    This research aimed to determine the biofunctional properties of wheat flour (WF) protein fractions and modifications to the antioxidant, anti-α-amylase and anti-angiotensin-I converting enzyme (ACE) activities induced by the action of digestive endopeptidases in vitro. A molecular characterization of the most abundant protein fractions, i.e., albumins, glutelins-1, glutelins-2 and prolamins, showed that low- and high-MW polypeptides rich in cysteine, glutamic acid and leucine were present in albumins and glutelins, whereas low-MW subunits with a high proportion of polar amino acids prevailed in prolamins. Prolamins exhibited the second-highest water holding capacity (54%) after WF (84%), while albumins provided superior foam stability (76%). Prolamins, glutenins-1 and globulins demonstrated the highest antioxidant activity (up to 95%, 68% and 59%, respectively) both before and after hydrolysis with pepsin (P-H) or trypsin-chymotrypsin (TC-H). Prolamins, globulins and WF strongly inhibited α-amylase (>90%) before and after TC-H, and before P-H (55-71%). Moreover, P-H significantly increased α-amylase inhibition by albumins from 53 to 74%. The fractions with strong ACE inhibitory activity (70-89%) included prolamins and globulins after TC-H or P-H, as well as globulins before TC-H and WF before P-H. This novel evidence indicates that WF protein fractions and their peptide-enriched P and TC hydrolysates are excellent sources of multifunctional bioactives with antioxidant, antihyperglycemic and antihypertensive potential.
    Matched MeSH terms: Flour
  15. Foo LH, Khor GL, Tee, E. Siong ES, Prabakaran D
    Malays J Nutr, 2006;12(1):11-21.
    MyJurnal
    Dietary intakes and lifestyle habits during adolescence may predict the occurrence of obesity and other diet-related chronic diseases later in life. The purpose of this study was to determine dietary intake of adolescents in a fishing community in Tuaran District, Sabah. A total of 199 apparently healthy adolescents comprising 94 male and 105 female subjects were purposively selected for the study. The mean age of the subjects was 15.2 f 2.2 years with female subjects having a higher mean age of 15.7 f 2.4 years compared to the males (14.6 k1.8 years). The mean BMI of the subjects was 18.4 f 2.9 kg/m2 with females having a significantly higher BMI (18.9 f 2.8 kg/m2) than the males (17.8 f 3.0 kg/m2). Based on the WHO classification (WHO, 1995), 19.6% of the subjects could be classified as thin while 4.5% were at risk of overweight. Overall for both sexes, intake of energy and most nutrients were below the Malaysian recommended nutrient intake (RNI) levels for adolescents, with the exception of vitamin C and niacin. The male subjects showed higher mean intake for vitamin A, thiamine, niacin and vitamin C than the females. Calcium and iron intake ranked among the lowest levels, at 33.4% and 47.2% respectively of the RNI values for both sexes. The main sources of energy were rice, flour products and tubers while fish and seafood were the chief sources of protein. Majority of the subjects (84%) reported taking breakfast daily, which often consisted of fried noodles, fried banana, doughnuts and coffee. Consumption of snacks was popular and commonly consumed snacks were bread, biscuits, and fried banana. The present study revealed that 25.5% and 14.3% of the male and female adolescents respectively were thin, with majority of them consuming inadequate levels of energy and several key nutrients. The results underscore the need for adolescents to be targeted for nutrition and health education as they go through a period of marked physical, physiological and psychological changes.
    Matched MeSH terms: Flour
  16. Nyam, K.L., Lau, M., Tan, C.P.
    Malays J Nutr, 2013;19(1):99-109.
    MyJurnal
    Introduction: The aims of this study were to determine the proximate composition, functional properties and antioxidant activity of pumpkin seeds and rind. Besides, the effects of dietary fibre in pumpkin seeds and rinds on bread qualities and properties were evaluated. Methods: Formulations for bread substituted with 0%, 5% and 10% pumpkin seed and rind, respectively were produced. Sensory evaluation of the prepared bread samples for such attributes as appearance, aroma, flavour, texture and overall acceptability was undertaken. The physical properties of the bread samples, including dough expansion, loaf volume, crumb colour and bread texture, were determined. Proximate analysis and determination of antioxidant activity of the bread samples were also conducted. Results: Crude fibre of the pumpkin seeds and pumpkin rinds was high at 31.48% and 14.83%, respectively. The total phenolic compound (TPC) and DPPH radical scavenging activity for the pumpkin rinds were 38.60 mg GAE/ 100 g dry weight and 69.38%, respectively, which were higher than those of pumpkin seeds. A 5% level of pumpkin rind bread gave the best overall acceptability and sensory attributes, followed by 5% pumpkin seed bread. Total dietary fibre, total phenolic compound and DPPH radical scavenging activity in breads substituted with 5% pumpkin seed and 5% pumpkin rind flour were higher than the values in control bread. Conclusion: Pumpkin seeds and rinds can be used as dietary fibre sources in bakery.
    Matched MeSH terms: Flour
  17. Wan Rosli, W.I., Chow, Y.N.
    Malays J Nutr, 2014;20(1):93-99.
    MyJurnal
    Introduction: Scientific evidence indicates that higher dietary fibre consumption protects against various chronic diseases and leads to recovery enhancement. Young corn ear is very rich in total dietary fibre (TDF). The study objective was to evaluate the effects of young corn ear addition on the nutritional composition, textural properties and sensory attributes of conventional cake. Methods: Wheat flour used in the preparation of conventional cake was substituted with different percentages (0%, 5%, 10% and 15%) of young corn ear powder (YCP). Moisture, total ash, fat, protein and TDF content of conventional cake samples were investigated. Textural properties including firmness, cohesiveness, springiness, gumminess and chewiness were examined. The aroma, colour, chewiness, tenderness, flavour and overall acceptance of conventional cake were evaluated via sensory evaluation. Results: The conventional cake with addition of 15% YCP recorded the highest moisture content. There was no predictable trend observed in the ash and fat content following the incorporation of YCP. Addition of 15% of YCP increased the protein content significantly while TDF content of conventional cake increased proportionally (1.42%-2.88%) with the level of YCP added. The incorporation of YCP did not produce any trend on all the textural properties of conventional cake. Conventional cake with 10% of YCP was the most preferred manifested by the highest scores in chewiness, tenderness and flavour attributes. Conclusion: In conclusion, 10% of YCP could be recommended as the ideal formulation in order to produce a healthier conventional cake without jeopardising acceptability.
    Matched MeSH terms: Flour
  18. Nur Atirah Hasmi, Siti Sarah Azman, Nadia Nisha Musa, Wan Nurul Hidayah Wan Anuar, Nur Nadirah Rodzali
    Jurnal Inovasi Malaysia, 2020;4(1):99-111.
    MyJurnal
    The potential of natural organic compounds as a repellent in biodegradable organic pot is budding into one of the new agriculture innovation. The use of recyclable materials in the production of the pot can reduce the excessive waste disposal problem and thus prevent pollution problems. The objectives are to recycle old newspapers into biodegradable pot for seedling of plants and to repel plant insect pests using organic compounds (Pandanus sp., Petroselinum crispum and Alium sativum). The production of the biodegradable pot incorporates the use of waste materials such as old newspapers and coconut husk together with natural organic materials such as tapioca flour, Pandanus amaryllifolius (pandan leaf), Petroselinum crispum (parsley) and Alium sativum (garlic). This product is distinguishable among others as it is environmental-friendly since the pot can naturally break over time (biodegradable). The aroma from the Pandanus amaryllifolius, Petroselinum crispum and Alium sativum can repel flying and crawling insect that may attack the crops. The organic insect-repellent biodegradable pot has a potential in replacing plastic polybags since the crops planted in the pot can be directly replanted in the soil without the need of disposing the pot. Root is allowed to grow through the pot where later on, it will be degraded. Apart from that, this pot has high commercial values since it is easy to be handled, low in production cost, eco-friendly where only recyclable and natural organic materials were used, and the most crucial point is it can act as an insect repellent.
    Matched MeSH terms: Flour
  19. Ojukwu M, Ofoedu C, Seow EK, Easa AM
    J Sci Food Agric, 2021 Jul;101(9):3732-3741.
    PMID: 33301191 DOI: 10.1002/jsfa.11004
    BACKGROUND: Rice flour does not contain gluten and lacks cohesion and extensibility, which is responsible for the poor texture of rice noodles. Different technologies have been used to mitigate this challenge, including hydrothermal treatments of rice flour, direct addition of protein in noodles, use of additives such as hydrocolloids and alginates, and microbial transglutaminase (MTG). Recently, the inclusion of soy protein isolate (SPI), MTG, and glucono-δ-lactone (GDL) in the rice noodles system yielded rice noodles with improved texture and more compact microstructure, hence the need to optimize the addition of SPI, MTG, and GDL to make quality rice noodles.

    RESULTS: Numerical optimization showed that rice noodles prepared with SPI, 68.32 (g kg-1 of rice flour), MTG, 5.06 (g kg-1 of rice flour) and GDL, 5.0 (g kg-1 of rice flour) gave the best response variables; hardness (53.19 N), springiness (0.76), chewiness (20.28 J), tensile strength (60.35 kPa), and cooking time (5.15 min). The pH, sensory, and microstructure results showed that the optimized rice noodles had a more compact microstructure with fewer hollows, optimum pH for MTG action, and overall sensory panelists also showed the highest preference for the optimized formulation, compared to other samples selected from the numerical optimization and desirability tests.

    CONCLUSION: Optimization of the levels of SPI, MTG, and GDL yielded quality noodles with improved textural, mechanical, sensory, and microstructural properties. This was partly due to the favourable pH value of the optimized noodles that provided the most suitable conditions for MTG crosslinking and balanced electrostatic interaction of proteins. © 2020 Society of Chemical Industry.

    Matched MeSH terms: Flour/analysis
  20. Jafarzadeh S, Rhim JW, Alias AK, Ariffin F, Mahmud S
    J Sci Food Agric, 2019 Apr;99(6):2716-2725.
    PMID: 30350410 DOI: 10.1002/jsfa.9439
    BACKGROUND: Active food packaging films with improved properties and strong antimicrobial activity were prepared by blending mixed nanomaterials with different ratio [1:4 (40 mg:160 mg), 3:2 (120 mg: 80 mg), 0:5 (0 mg: 200 mg) and 5:0 (200 mg:0 mg)] of ZnO and kaolin with semolina using a solvent casting method and used for the packaging of low moisture mozzarella cheese to test the effect of packaging on the quality change of the cheese for long-term (up to 72 days) refrigerated storage.

    RESULTS: Compared with the neat semolina film, mechanical strength (TS) of the nanocomposite films increased significantly (increase in 21-65%) and water vapor barrier (WVP) and O2 gas barrier (OP) properties decreased significantly (decrease in 43-50% and 60-65%, respectively) depending on the blending ratio of ZnO and kaolin nanoclay. The nanocomposite films also exhibited strong antimicrobial activity against bacteria (E. coli and S. aureus), yeast (C. albicans), and mold (A. niger). The nanocomposite packaging films were effectively prevented the growth of microorganisms (coliforms, total microbial, and fungi) of the cheese during storage at low-temperature and showed microbial growth of less than 2.5 log CFU/g after 72 days of storage compared to the control group, and the quality of the packaged cheese was still acceptable.

    CONCLUSION: The semolina-based nanocomposite films, especially Sem/Z3 K2 film, were effective for packaging of low moisture mozzarella cheese to maintain the physicochemical properties (pH, moisture, and fat content) and quality (color, taste, texture, and overall acceptability) of the cheese as well as preventing microbial growth (coliforms, total microbial, and fungi). © 2018 Society of Chemical Industry.

    Matched MeSH terms: Flour/analysis*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links