Displaying publications 1 - 20 of 58 in total

Abstract:
Sort:
  1. Premalatha GD, Ravindran J
    Med J Malaysia, 2000 Mar;55(1):146-51; quiz 152.
    PMID: 11072503
    The number of women in the workforce in increasing. A substantial proportion are in the reproductive age which brings to attention the problem of work exposures that adversely affect reproductive outcome. These exposures include chemicals, radiation, strenuous physical activity and infections. They affect reproduction by effect on the germ cells, through hormonal distribution which in turn affects transport of germ cells or zygote, implantation and development. Some of these exposures are teratogenic. At present, some regulations and policies seem to be directed at women workers while there is evidence to show that women are not the only victims. Paternal exposures have also been reported to be associated with infertility, spontaneous abortions and other adverse outcomes. There is insufficient information about reproductive effects of work exposures and hence further research is required in this area.
    Matched MeSH terms: Hazardous Substances/adverse effects
  2. Tan CC
    Scand J Work Environ Health, 1991 Aug;17(4):221-30.
    PMID: 1925433
    Nurses are an integral component of the health care delivery system. In discharging their duties, nurses encounter a variety of occupational health problems which may be categorized into biological hazards, chemical hazards, physical hazards, and psychosocial hazards. A review of some examples of each of these four types of hazards is presented in this article. Particular attention has been devoted to hepatitis B, acquired immunodeficiency syndrome, tuberculosis, cytotoxic drugs, anesthetic agents, needlestick injury, back pain, and stress.
    Matched MeSH terms: Hazardous Substances/adverse effects
  3. Wu Y, Liu Y, Kamyab H, Rajasimman M, Rajamohan N, Ngo GH, et al.
    Environ Res, 2023 Sep 01;232:116363.
    PMID: 37295587 DOI: 10.1016/j.envres.2023.116363
    Due to their widespread occurrence and detrimental effects on human health and the environment, endocrine-disrupting hazardous chemicals (EDHCs) have become a significant concern. Therefore, numerous physicochemical and biological remediation techniques have been developed to eliminate EDHCs from various environmental matrices. This review paper aims to provide a comprehensive overview of the state-of-the-art remediation techniques for eliminating EDHCs. The physicochemical methods include adsorption, membrane filtration, photocatalysis, and advanced oxidation processes. The biological methods include biodegradation, phytoremediation, and microbial fuel cells. Each technique's effectiveness, advantages, limitations, and factors affecting their performance are discussed. The review also highlights recent developments and future perspectives in EDHCs remediation. This review provides valuable insights into selecting and optimizing remediation techniques for EDHCs in different environmental matrices.
    Matched MeSH terms: Hazardous Substances/toxicity
  4. Rahim, Z.H.A.
    Ann Dent, 1998;5(1):-.
    MyJurnal
    Saliva collection is non-invasive and less stressful when compared with blood collection. Extensive studies on saliva has been carried out and the use of saliva as a biological sample in clinical diagnosis and for monitoring hormones, drugs and pollutants and viruses has been recommended. The complexities associated with saliva such as proper collection device and strict standardisation of a number of factors which include time of collection, types of saliva and storage made it less favourable to blood.
    Matched MeSH terms: Hazardous Substances
  5. Ho, C. L. I., Choo, B. Q.
    MyJurnal
    In this paper, stormwater runoff from a residential catchment located in Miri, Sarawak, was characterized to determine the pollutant concentrations and loading. The observed average event mean concentrations were 116 mg/L for TSS, 115 mg/L for COD, 1.5 mg/L for NH3-N, and 0.23 mg/L for Pb. Based on Interim National Water Quality Standards (INWQS) for Malaysia, the average event mean concentration, EMC value for TSS exceeded class II (50 mg/L), exceeded class V (>100 mg/L) for COD, and exceeded class III (0.9 mg/L) for NH3-N. All four water quality parameters exhibited first flush characteristic but to varying magnitude which was influenced by the storm characteristics.
    Matched MeSH terms: Hazardous Substances
  6. Ta GC, Mokhtar MB, Peterson PJ, Yahaya NB
    Ind Health, 2011;49(6):765-73.
    PMID: 22020020
    The European Union (EU) and the World Health Organization (WHO) have applied different approaches to facilitate the implementation of the UN Globally Harmonized System of Classification and Labelling of Chemicals (GHS). The EU applied the mandatory approach by gazetting the EU Regulation 1272/2008 incorporating GHS elements on classification, labelling and packaging of substances and mixtures in 2008; whereas the WHO utilized a voluntary approach by incorporating GHS elements in the WHO guidelines entitled 'WHO Recommended Classification of Pesticides by Hazard' in 2009. We report on an analysis of both the mandatory and voluntary approaches practised by the EU and the WHO respectively, with close reference to the GHS 'purple book'. Our findings indicate that the mandatory approach practiced by the EU covers all the GHS elements referred to in the second revised edition of the GHS 'purple book'. Hence we can conclude that the EU has implemented the GHS particularly for industrial chemicals. On the other hand, the WHO guidelines published in 2009 should be revised to address concerns raised in this paper. In addition, both mandatory and voluntary approaches should be carefully examined because the classification results may be different.
    Matched MeSH terms: Hazardous Substances/classification*
  7. Hayyan M, Hashim MA, Hayyan A, Al-Saadi MA, AlNashef IM, Mirghani ME, et al.
    Chemosphere, 2013 Feb;90(7):2193-5.
    PMID: 23200570 DOI: 10.1016/j.chemosphere.2012.11.004
    In continuation of investigation for environmentally benign protocol for new solvents termed deep eutectic solvents (DESs), it is herein reported results concerning the toxicity and cytotoxicity of choline chloride (ChCl) based DESs with four hydrogen bond donors including glycerine, ethylene glycol, triethylene glycol and urea. The toxicity was investigated using two Gram positive bacteria Bacillus subtilis and Staphylococcus aureus, and two Gram negative bacteria Escherichia coli and Pseudomonas aeruginosa. The cytotoxicity effect was tested using the Artemia salina leach. It was found that there was no toxic effect for the tested DESs on all of the studied bacteria confirming their benign effects on these bacteria. Nevertheless, it was found that the cytotoxicity of DESs was much higher than their individual components (e.g. glycerine, ChCl) indicating that their toxicological behavior is different. For our best knowledge this is the first time that toxicity and cytotoxicity of DESs were studied. The toxicity and cytotoxicity of DESs varied depending on the structure of components. Careful usage of the terms non-toxicity and biodegradability must be considered. More investigation on this matter is required.
    Matched MeSH terms: Hazardous Substances/toxicity*
  8. Inayat-Hussain SH, Fukumura M, Muiz Aziz A, Jin CM, Jin LW, Garcia-Milian R, et al.
    Environ Int, 2018 08;117:348-358.
    PMID: 29793188 DOI: 10.1016/j.envint.2018.05.010
    BACKGROUND: Recent trends have witnessed the global growth of unconventional oil and gas (UOG) production. Epidemiologic studies have suggested associations between proximity to UOG operations with increased adverse birth outcomes and cancer, though specific potential etiologic agents have not yet been identified. To perform effective risk assessment of chemicals used in UOG production, the first step of hazard identification followed by prioritization specifically for reproductive toxicity, carcinogenicity and mutagenicity is crucial in an evidence-based risk assessment approach. To date, there is no single hazard classification list based on the United Nations Globally Harmonized System (GHS), with countries applying the GHS standards to generate their own chemical hazard classification lists. A current challenge for chemical prioritization, particularly for a multi-national industry, is inconsistent hazard classification which may result in misjudgment of the potential public health risks. We present a novel approach for hazard identification followed by prioritization of reproductive toxicants found in UOG operations using publicly available regulatory databases.

    METHODS: GHS classification for reproductive toxicity of 157 UOG-related chemicals identified as potential reproductive or developmental toxicants in a previous publication was assessed using eleven governmental regulatory agency databases. If there was discordance in classifications across agencies, the most stringent classification was assigned. Chemicals in the category of known or presumed human reproductive toxicants were further evaluated for carcinogenicity and germ cell mutagenicity based on government classifications. A scoring system was utilized to assign numerical values for reproductive health, cancer and germ cell mutation hazard endpoints. Using a Cytoscape analysis, both qualitative and quantitative results were presented visually to readily identify high priority UOG chemicals with evidence of multiple adverse effects.

    RESULTS: We observed substantial inconsistencies in classification among the 11 databases. By adopting the most stringent classification within and across countries, 43 chemicals were classified as known or presumed human reproductive toxicants (GHS Category 1), while 31 chemicals were classified as suspected human reproductive toxicants (GHS Category 2). The 43 reproductive toxicants were further subjected to analysis for carcinogenic and mutagenic properties. Calculated hazard scores and Cytoscape visualization yielded several high priority chemicals including potassium dichromate, cadmium, benzene and ethylene oxide.

    CONCLUSIONS: Our findings reveal diverging GHS classification outcomes for UOG chemicals across regulatory agencies. Adoption of the most stringent classification with application of hazard scores provides a useful approach to prioritize reproductive toxicants in UOG and other industries for exposure assessments and selection of safer alternatives.

    Matched MeSH terms: Hazardous Substances/analysis*
  9. Kravchenko J, Corsini E, Williams MA, Decker W, Manjili MH, Otsuki T, et al.
    Carcinogenesis, 2015 Jun;36 Suppl 1:S111-27.
    PMID: 26002081 DOI: 10.1093/carcin/bgv033
    An increasing number of studies suggest an important role of host immunity as a barrier to tumor formation and progression. Complex mechanisms and multiple pathways are involved in evading innate and adaptive immune responses, with a broad spectrum of chemicals displaying the potential to adversely influence immunosurveillance. The evaluation of the cumulative effects of low-dose exposures from the occupational and natural environment, especially if multiple chemicals target the same gene(s) or pathway(s), is a challenge. We reviewed common environmental chemicals and discussed their potential effects on immunosurveillance. Our overarching objective was to review related signaling pathways influencing immune surveillance such as the pathways involving PI3K/Akt, chemokines, TGF-β, FAK, IGF-1, HIF-1α, IL-6, IL-1α, CTLA-4 and PD-1/PDL-1 could individually or collectively impact immunosurveillance. A number of chemicals that are common in the anthropogenic environment such as fungicides (maneb, fluoxastrobin and pyroclostrobin), herbicides (atrazine), insecticides (pyridaben and azamethiphos), the components of personal care products (triclosan and bisphenol A) and diethylhexylphthalate with pathways critical to tumor immunosurveillance. At this time, these chemicals are not recognized as human carcinogens; however, it is known that they these chemicalscan simultaneously persist in the environment and appear to have some potential interfere with the host immune response, therefore potentially contributing to promotion interacting with of immune evasion mechanisms, and promoting subsequent tumor growth and progression.
    Matched MeSH terms: Hazardous Substances/adverse effects*; Hazardous Substances/immunology*
  10. Karwowski MP, Morman SA, Plumlee GS, Law T, Kellogg M, Woolf AD
    Environ Geochem Health, 2017 Oct;39(5):1133-1143.
    PMID: 27704308 DOI: 10.1007/s10653-016-9881-6
    Though most childhood lead exposure in the USA results from ingestion of lead-based paint dust, non-paint sources are increasingly implicated. We present interdisciplinary findings from and policy implications of a case of elevated blood lead (13-18 mcg/dL, reference level <5 mcg/dL) in a 9-month-old infant, linked to a non-commercial Malaysian folk diaper powder. Analyses showed the powder contains 62 % lead by weight (primarily lead oxide) and elevated antimony [1000 parts per million (ppm)], arsenic (55 ppm), bismuth (110 ppm), and thallium (31 ppm). These metals are highly bioaccessible in simulated gastric fluids, but only slightly bioaccessible in simulated lung fluids and simulated urine, suggesting that the primary lead exposure routes were ingestion via hand-mouth transmission and ingestion of inhaled dusts cleared from the respiratory tract. Four weeks after discontinuing use of the powder, the infant's venous blood lead level was 8 mcg/dL. Unregulated, imported folk remedies can be a source of toxicant exposure. Additional research on import policy, product regulation, public health surveillance, and culturally sensitive risk communication is needed to develop efficacious risk reduction strategies in the USA. The more widespread use of contaminated folk remedies in the countries from which they originate is a substantial concern.
    Matched MeSH terms: Hazardous Substances/analysis; Hazardous Substances/blood
  11. Kassim A, Halmi MIE, Gani SSA, Zaidan UH, Othman R, Mahmud K, et al.
    Ecotoxicol Environ Saf, 2020 Jun 15;196:110527.
    PMID: 32278138 DOI: 10.1016/j.ecoenv.2020.110527
    Assessment of eco-toxicant using bioluminescent bacterial assay is a widely used and globally accepted method. In this work, a new luminescent bacterium was isolated from squid (Loligo duvauceli) and identified as Photobacterium leiognathi strain AK-MIE using 16S rRNA, phylogeny analysis. The predicted optimum conditions by RSM were 2.76% (w/v) NaCl, 2.28% (w/v) peptone, 0.34% (w/v) yeast extract, and pH 6.83 with 541,211.80 RLU of luminescent production whereas the predicted optimum conditions by ANN were 2.21% (w/v) NaCl, 2.27% (w/v) peptone, 0.39% (w/v) yeast extract, and pH 6.94 which produced 541,986.20 RLU. The validation analysis of both RSM and ANN show 0.60% and 0.69% deviation from the predicted results indicating that both models provided good quality predictions with ANN showing a superior data fitting capability for non-linear regression analysis. Toxicity tests show strain AK-MIE was sensitive to mercury (concentration causing 50% inhibition or IC50 of 0.00978 mgL-1), followed by cadmium (IC50 of 0.5288 mgL-1), copper IC50 of (0.8117 mgL-1), silver (IC50 of 1.109 mgL-1), and lead (IC50 of 10.71 mgL-1) which are more sensitive than previously isolated luminescent bacteria, suggesting that strain AK-MIE has the potential to be used in toxicity assessment of heavy metals in the environment. Based on the field trial results, several sediment samples from industrial areas in Bangi, Selangor managed to inhibit the bioluminescence of strain AK-MIE. Validation method carried out using ICP-MS proved the presence of several toxic heavy metal elements.
    Matched MeSH terms: Hazardous Substances/analysis*; Hazardous Substances/toxicity
  12. Mohammed Taher Alfates, Biak, Dayang Radiah Awang
    MyJurnal
    Transport of fuel is essential to ensure supplies are delivered as per requested by the industrial sites or other demands. Numerous accidents have been reported and recorded in which loss of containment of hazardous chemicals occurred and led to disastrous outcomes. This paper presents the analysis of Boiling Liquid Expanding Vapour Explosion (BLEVE) due to loss of containment for Liquefied Petroleum Gas (LPG) road tankers. The main objective of this paper is to evaluate the potential consequences resulting from overpressure blast and thermal radiation of tankers carrying LPG to the people and the surrounding. The aim is also to compare the outcomes obtained from PHAST software simulator 8.11 with that of established mathematical model. Malaysia North-south Expressway (NSE) was selected as the location of the incident. The volume, weather parameters and properties of LPG were identified. It was found that the effect of BLEVE on people and structures was catastrophic. The results obtained from the mathematical model were similar with that modelled using PHAST software simulator.
    Matched MeSH terms: Hazardous Substances
  13. Muhammad Firdaus Othman,, Nor Aimi Abdul Wahab, Suhaiza Hasan, Marina Mokhtar, Noorezal Atfyinna Mohd Napiah, Mohd Noor Mokhtar, et al.
    Jurnal Inovasi Malaysia, 2019;2(2):123-139.
    MyJurnal
    Teaching, learning and reseach activities in chemical laboratory usually involves a variety of hazardous chemicals. All chemicals stored in the laboratories should be accompanied by a safety data sheet which contains information such as chemical composition, safety precautions for handling and storing chemicals and emergency measures in case of accident. Ineffective management of chemical safety data sheet makes it difficult to access and resulting in slow action taken in the event of accident. To overcome this problem, Quisy-SDS was introduced to ensure a more effective chemical safety information management. Quisy-SDS provides a convenient method for all lab users and emergency respondents to acess the chemical safety information. This method uses a Quick Response (QR) code and website that allow users to acess the information in no time, anytime and anywhere. The use of Quisy-SDS has successfully reduced the search time of chemical safety information by 98% compared to the previous method.
    Matched MeSH terms: Hazardous Substances
  14. Salvaraji L, Jeffree MS, Avoi R, Atil A, Mohd Akhir H, Shamsudin SBB, et al.
    J Public Health Res, 2020 Oct 14;9(4):1994.
    PMID: 33312989 DOI: 10.4081/jphr.2020.1994
    An increasing amount of waste concurrently further extends the risk of exposure to hazardous material among waste collectors. In light of the COVID-19 crisis, municipal waste collectors are one of the most at-risk groups of SARS-Cov-2 exposure. Risk assessment included hazard identification, evaluation of existing control level at the workplace, estimation of likelihood and severity of hazard, risk determination, and control measure recommendations. Five waste collection activities were identified and reviewed. High-risk exposure includes collection of garbage, mechanical manipulation of compactor lorries and unloading of garbage at the disposal site. There is poor practice of personal hygiene and unestablished continuous monitoring of personal protective equipment supplies. The preventive measures in the waste collection industry are influenced by several factors. Until the preventive measures are adopted into practice and adapted according to each company's requirements, biological agents continue to be risk factor to the health workers.
    Matched MeSH terms: Hazardous Substances
  15. Arifin MH, Kayode JS, Ismail MKI, Abdullah AM, Embrandiri A, Nazer NSM, et al.
    J Hazard Mater, 2021 03 15;406:124282.
    PMID: 33199149 DOI: 10.1016/j.jhazmat.2020.124282
    Environmental hazards, industrial, and municipal wastes geochemical and geophysical assessments were carried out at an industrial waste disposal (IWD) site at Bukit Kepong, Kuala Lumpur, Malaysia. RES2-D geophysical method was applied, capable of identification and quantification of the industrial wastes; buried hazardous materials (BHM) and their effects on the subsurface stratum, from the moderately saturated zones, to fully saturated zones housing the aquifer units underneath the water table. Six RES2-D survey profiles were respectively acquired along E-W, and N-S directions. The perpendicular arrangement of the RES2-D survey lines, was tenaciously designed to make possible, the industrial waste materials (IWM)and municipal solid waste (MSW) quantification, with sufficient length of survey lines set at 200 m, and electrode spacing of 5 m, to cover as much details segments of the IWM and MSW as possible. The six RES2-D inversion results, helped in the subsurface stratum classification into three layers, namely; soft layers, which encompasses the waste materials, with varied resistivity values i.e., 0-100 Ω-m, at 10-15 m depths. The consolidated layers produced varied resistivity values i.e., 101-400 Ω-m, at 15-20 m depths. The bedrock has the highest resistivity values i.e., 401-2000 Ω-m, at depths > 20 m. The estimated volume of the waste materials was 312,000 m 3, using 3-D Oasis Montaj modeling via rectangular prism model generated from the inverted RES2-D. Results from the geochemical analysis helped in the validation of the site as a potential contaminated zone with severe health effects.
    Matched MeSH terms: Hazardous Substances
  16. Karthikeyan V, Gnanamoorthy G, Varun Prasath P, Narayanan V, Sagadevan S, Umar A, et al.
    J Nanosci Nanotechnol, 2020 Sep 01;20(9):5759-5764.
    PMID: 32331175 DOI: 10.1166/jnn.2020.17898
    Herein, we report the facile synthesis, characterization and visible-light-driven photocatalytic degradation of perforated curly Zn0.1Ni0.9O nanosheets synthesized by hydrothermal process. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) studies confirmed the cubic phase crystalline structure and growth of high density perforated curly Zn0.1Ni0.9O nanosheets, respectively. As a photocatalyst, using methylene blue (MB) as model pollutant, the synthesized nanosheets demonstrated a high degradation efficiency of ~76% in 60 min under visible light irradiation. The observed results suggest that the synthesized Zn0.1Ni0.9O nanosheets are attractive photocatalysts for the degradation of toxic organic waste in the water under visible light.
    Matched MeSH terms: Hazardous Substances
  17. Anuar, I., Zahedi, F., Kadir, A., Mokhtar, A.B.
    MyJurnal
    Background: The occupationally acquired accident and injuries in Malaysian medical laboratories are still largely unexplored prior to this survey. Some of these questions are attempted in this survey and act as source of reference for the number and accident injuries in medical laboratories in the area of Klang Valley and also in Malaysia.
    Methods : This survey was carried out based on recordable cases throughout the calendar year of 2001 to 2005 from 3 main medical laboratories of Hospital Kuala Lumpur (HKL), Hospital Universiti Kebangsaan Malaysia (HUKM) and Pusat Perubatan Universiti Malaya (PPUM).
    Results : The average annual incident rate for this three medical laboratories is 2.05/100 full time equivalent (FTE) employees. The annual incident rate in individual medical laboratory is 2.04/100 FTE (HKL), 2.07/100 FTE (HUKM) and 2.04/100 FTE (PPUM) employees, respectively. The most common injury that is 25.3% of the total cases reported was due to cuts by sharp objects and the second most common injury was exposure to biohazard and chemical substances which constitutes 19.9% of the total cases. . Needle prick injury (16.8%), fire (8.4%), fall/slip (6.3%) and gases leak and locked in cold room were reported as one case each.
    Conclusion : The average incident rate from this study is remarkably similar compared with the incident injury rate reported by BLS (2006) which is 2.1/100 FTE in the average size of medical laboratory and diagnostic. Besides this incident rate of injury and illness as a comparison, it also can be used as a benchmark to evaluate the safety performance among medical laboratories in Malaysia.
    Matched MeSH terms: Hazardous Substances
  18. Alina, M., Azrina, A., Mohd Yunus, A.S., Mohd Zakiuddin, S., Mohd Izuan Effendi, H., Muhammad Rizal, R.
    MyJurnal
    Level of heavy metals in marine ecosystem has been intensively studied during recent years as these hazardous substances could be accumulated in the biota. Generally, the presence of contaminants in fish is a result of human activities such as industrial and agricultural wastes. In this study, the marine fish and shellfish from the Straits of Malacca were analyzed using Inductively Coupled Plasma Optical Emission Spectrophotometer (ICP-OES) and Flow Injection Mercury System (FIMS) for Cd, As and Pb and Hg, respectively. The Straits of Malacca is one of the busiest shipping routes in the world that make the level of heavy metals potentially high besides the various industrial activities along the west region of Peninsular Malaysia. The range of heavy metals in samples were 1.0-3-6.5-3 µg/ g wet sample for Hg, 0.5-2-47-2 µg/ g wet sample for Cd, 0.01-0.39 µg/ g wet sample for Pb and 0.14-6.57 µg/ g wet sample for As. Most part of the values was below the permitted limit set by FAO/WHO 2004 as well as Food Act 1983 and Food Regulations 1985. Therefore it can be generalized that fish and shellfish from the Straits of Malacca are safe to consume in terms of these heavy metals concentrationand do not constitute a risk for human health.
    Matched MeSH terms: Hazardous Substances
  19. Nor Halim Hasan, Said, M.R., Leman, A.M.
    MyJurnal
    Engineering control is a method of controlling the risk of exposure to contaminants. Health effects to industrial workers are more severe whilst high exposure and time exposed to contaminants at workplace. Installation of industrial ventilation or local exhaust ventilation (LEV) system is the proposed method to reduce the risk. This paper discusses the past, present and future relating to LEV system in Malaysia. Current issues related to monitoring reported by Hygiene Technician in compliance with Occupational Safety and Health (Use of Standard Chemical Hazardous to Health Regulation 2000) carried out in several states in Malaysia as a sample. The nanotechnology is a new area at present and future. The involvement of government, employers and employees need to be justified due to the attention to prevent and control of any exposure. It is suggested that using the Computational Fluid Dynamic (CFD) simulation, a new design of LEV system can be upgraded and predicted.
    Matched MeSH terms: Hazardous Substances
  20. Halmi, M.I.E.
    MyJurnal
    The rise in pollution cases globally is expected to increase in line with industrialization.
    Monitoring activities for pollutants have been hampered by the astronomical costs of
    instrumental-based approach. This has resulted in the intense research on low cost
    biomonitoring systems using enzymes, organisms including microorganisms. Only positive
    samples are sent for instrumental analysis; dramatically cutting the cost of instrumental
    analysis. This review attempts to outline and give due recognition to several selected bioassay
    systems that have been tested for their applicability using polluted water samples as a routine
    first line-of-defense. This includes small aquatic organisms-based assays, enzymes especially
    proteases and bacterial-based systems using respiratory dye or luminescence systems as a
    method for toxicant detection.
    Matched MeSH terms: Hazardous Substances
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links