Displaying publications 1 - 20 of 279 in total

Abstract:
Sort:
  1. Billy TJ, Sreeramareddy CT, Oo PS, Aye SN
    Nicotine Tob Res, 2024 Mar 22;26(4):508-511.
    PMID: 37819726 DOI: 10.1093/ntr/ntad198
    INTRODUCTION: Exposure to tobacco imagery creates a positive impression about smoking and is associated with youth smoking uptake.

    METHODS: From the list of movies released during 2015-2019, we selected the top 10 movies per year rated by the Malaysian Film Development Corporation. Two researchers coded tobacco imagery in each movie considering 5-minute time intervals as a unit. The 5-minute interval coding was adopted from previous research for comparability. Frequencies and the average occurrence of tobacco imagery were compared by movie language, genre, and age categorization.

    RESULTS: In 50 movies analyzed, there were a total of 1037 five-minute intervals of which 26 (52%) movies and 277 (26.7%) of intervals tobacco imagery were present. Brand appearances were absent and health warnings about tobacco use were present in just one movie. The proportions of intervals containing actual use, paraphernalia, and implied use were 63.5%, 22.0%, and 14.5%. Tobacco imagery of actual use, paraphernalia, and implied use was present in 25, 20, and 10 movies, respectively. In those movies with tobacco imagery, the average number of occurrences of actual use, paraphernalia, and implied use was 3 (interquartile range [IQR] 2-11.5), 2.5 (IQR 1.3-4.0), and 1 (IQR 1-4), respectively. Movies classified as "p13" (median 6, IQR 6-13) and "18" (median 5, IQR 0-15) had higher average occurrences of tobacco imagery than "U" movies (median 0, IQR 0-2; p = .028).

    CONCLUSIONS: The lack of health warnings despite the presence of tobacco imagery in Malaysian movies calls for measures to regulate tobacco-related content and reclassify such movies as "for adults-only."

    IMPLICATIONS: Tobacco imagery was prevalent in Malaysian movies that are allowed viewing by individuals aged 13 years and above. A review of the age categorization of Malaysian movies and the placement of health warnings in movies is needed. A comprehensive implementation of the ban on tobacco advertisements, promotion, and sponsorship should also include a ban on tobacco imagery in movies.

    Matched MeSH terms: Motion Pictures as Topic*
  2. Bong May Ing J, Singh DKA, Tan MP, Adam Bujang M, Tiong IK, Whitney J, et al.
    Australas J Ageing, 2023 Dec;42(4):624-637.
    PMID: 37465973 DOI: 10.1111/ajag.13227
    OBJECTIVES: Southeast Asia (SEA) is a rapidly ageing and a diversely populated region that requires strategies to maintain its populations' physical activity and sense of well-being. While the benefits of group exercise programs are known, the characteristics and types of exercises in terms of their effectiveness for physical function and fidelity of the programs have yet to be defined within this population.

    METHODS: Ovid, MEDLINE, Scopus, PEDro (Physiotherapy Evidence Database), EBSCOHOST, Cochrane library and Open Grey databases were searched to identify relevant studies. Methodological quality was assessed using the PEDro Scale and the Newcastle Ottawa Scale (NOS). Meta-analysis was undertaken when the same outcome measures were reported in a minimum of two studies with appropriate data. (PROSPERO: CRD42020177317).

    RESULTS: Eleven studies with 900 participants were included, out of which 395 participants were allocated to group exercise programs and 383 completed the program. Culturally adapted Thai dance programs and multicomponent exercise programs were the most-commonly reported group exercises. The Timed Up and Go test (TUG) and attendance rates were the most-frequently reported outcomes. Meta-analysis demonstrated significant improvement in physical function assessed using the Timed Up and Go test (Random effect model -1.27 s, 95% CI -1.65, -0.88, I2  = 74%). In two studies, adherence (81% and 94%) and dropout rates (4% and 19%) were reported.

    CONCLUSIONS: Group-based exercise programs in Southeast Asia consisting mostly of culturally adapted Thai dance programs and multicomponent exercise programs appear to have positive effects on physical function. However, better descriptions of fidelity, including adherence, are required in future studies.

    Matched MeSH terms: Time and Motion Studies
  3. Piyarathna IE, Thabet AM, Ucgul M, Lemckert C, Lim YY, Tang ZS
    Sensors (Basel), 2023 Jun 01;23(11).
    PMID: 37299984 DOI: 10.3390/s23115257
    Piezoelectric energy harvesting systems have been drawing the attention of the research community over recent years due to their potential for recharging/replacing batteries embedded in low-power-consuming smart electronic devices and wireless sensor networks. However, conventional linear piezoelectric energy harvesters (PEH) are often not a viable solution in such advanced practices, as they suffer from a narrow operating bandwidth, having a single resonance peak present in the frequency spectrum and very low voltage generation, which limits their ability to function as a standalone energy harvester. Generally, the most common PEH is the conventional cantilever beam harvester (CBH) attached with a piezoelectric patch and a proof mass. This study investigated a novel multimode harvester design named the arc-shaped branch beam harvester (ASBBH), which combined the concepts of the curved beam and branch beam to improve the energy-harvesting capability of PEH in ultra-low-frequency applications, in particular, human motion. The key objectives of the study were to broaden the operating bandwidth and enhance the harvester's effectiveness in terms of voltage and power generation. The ASBBH was first studied using the finite element method (FEM) to understand the operating bandwidth of the harvester. Then, the ASBBH was experimentally assessed using a mechanical shaker and real-life human motion as excitation sources. It was found that ASBBH achieved six natural frequencies within the ultra-low frequency range (<10 Hz), in comparison with only one natural frequency achieved by CBH within the same frequency range. The proposed design significantly broadened the operating bandwidth, favouring ultra-low-frequency-based human motion applications. In addition, the proposed harvester achieved an average output power of 427 μW at its first resonance frequency under 0.5 g acceleration. The overall results of the study demonstrated that the ASBBH design can achieve a broader operating bandwidth and significantly higher effectiveness, in comparison with CBH.
    Matched MeSH terms: Motion
  4. Al-Masni MA, Lee S, Al-Shamiri AK, Gho SM, Choi YH, Kim DH
    Comput Biol Med, 2023 Feb;153:106553.
    PMID: 36641933 DOI: 10.1016/j.compbiomed.2023.106553
    Patient movement during Magnetic Resonance Imaging (MRI) scan can cause severe degradation of image quality. In Susceptibility Weighted Imaging (SWI), several echoes are typically measured during a single repetition period, where the earliest echoes show less contrast between various tissues, while the later echoes are more susceptible to artifacts and signal dropout. In this paper, we propose a knowledge interaction paradigm that jointly learns feature details from multiple distorted echoes by sharing their knowledge with unified training parameters, thereby simultaneously reducing motion artifacts of all echoes. This is accomplished by developing a new scheme that boosts a Single Encoder with Multiple Decoders (SEMD), which assures that the generated features not only get fused but also learned together. We called the proposed method Knowledge Interaction Learning between Multi-Echo data (KIL-ME-based SEMD). The proposed KIL-ME-based SEMD allows to share information and gain an understanding of the correlations between the multiple echoes. The main purpose of this work is to correct the motion artifacts and maintain image quality and structure details of all motion-corrupted echoes towards generating high-resolution susceptibility enhanced contrast images, i.e., SWI, using a weighted average of multi-echo motion-corrected acquisitions. We also compare various potential strategies that might be used to address the problem of reducing artifacts in multi-echoes data. The experimental results demonstrate the feasibility and effectiveness of the proposed method, reducing the severity of motion artifacts and improving the overall clinical image quality of all echoes with their associated SWI maps. Significant improvement of image quality is observed using both motion-simulated test data and actual volunteer data with various motion severity strengths. Eventually, by enhancing the overall image quality, the proposed network can increase the effectiveness of the physicians' capability to evaluate and correctly diagnose brain MR images.
    Matched MeSH terms: Motion
  5. Abd Rahman NA, Li S, Schmid S, Shaharudin S
    Phys Ther Sport, 2023 Jan;59:60-72.
    PMID: 36516512 DOI: 10.1016/j.ptsp.2022.11.011
    Low back pain (LBP) can result in increased direct medical and non-medical costs to patients, employers, and health care providers. This systematic review aimed to provide a better understanding of the biomechanical factors associated with chronic non-specific LBP in adults. SCOPUS, ScienceDirect, MEDLINE, and Web of Science databases were searched. In total, 26 studies were included and significant differences were noted between healthy controls and LBP patients in various motion. Biomechanical factors among adults with non-specific LBP were altered and differed as compared to healthy controls in various motion might be to compensate the pain during those motions. This review highlighted the biomechanical differences across those with non-specific LBP and healthy adults. Both groups showed a similar level of pain during functional tasks but LBP patients suffered from a moderate level of disability. Future studies should not rely on questionnaire-based pain scale only. The biomechanical factors summarized in this review can be used to diagnose non-specific LBP accurately, and as modifiable targets for exercise-based intervention.
    Matched MeSH terms: Range of Motion, Articular
  6. Majeed Z, Nawazish S, Baig A, Akhtar W, Iqbal A, Muhammad Khan W, et al.
    PLoS One, 2023;18(2):e0278568.
    PMID: 36848343 DOI: 10.1371/journal.pone.0278568
    Green biomass is a renewable and biodegradable material that has the potential use to trap urea to develop a high-efficiency urea fertilizer for crops' better performance. Current work examined the morphology, chemical composition, biodegradability, urea release, soil health, and plant growth effects of the SRF films subjected to changes in the thickness of 0.27, 0.54, and 1.03 mm. The morphology was examined by Scanning Electron Microscopy, chemical composition was analyzed by Infrared Spectroscopy, and biodegradability was assessed through evolved CO2 and CH4 quantified through Gas Chromatography. The chloroform fumigation technique was used for microbial growth assessment in the soil. The soil pH and redox potential were also measured using a specific probe. CHNS analyzer was used to calculate the total carbon and total nitrogen of the soil. A plant growth experiment was conducted on the Wheat plant (Triticum sativum). The thinner the films, the more they supported the growth and penetration of the soil's microorganisms mainly the species of fungus possibly due to the presence of lignin in films. The fingerprint regions of the infrared spectrum of SRF films showed all films in soil changed in their chemical composition due to biodegradation but the increase in the thickness possibly provides resistance to the films' losses. The higher thickness of the film delayed the rate and time for biodegradation and the release of methane gas in the soil. The 1.03 mm film (47% in 56 days) and 0.54 mm film (35% in 91 days) showed the slowest biodegradability as compared to the 0.27 mm film with the highest losses (60% in 35 days). The slow urea release is more affected by the increase in thickness. The Korsymer Pappas model with release exponent value of < 0.5 explained the release from the SRF films followed the quasi-fickian diffusion and also reduced the diffusion coefficient for urea. An increase in the pH and decrease in the redox potential of the soil is correlated with higher total organic content and total nitrogen in the soil in response to amending SRF films with variable thickness. Growth of the wheat plant showed the highest average plant length, leaf area index and grain per plant in response to the increase in the film's thickness. This work developed an important knowledge to enhance the efficiency of film encapsulated urea that can better slow the urea release if the thickness is optimized.
    Matched MeSH terms: Motion Pictures as Topic*
  7. AlDahas A, Devecchi V, Deane JA, Falla D
    PLoS One, 2023;18(10):e0292798.
    PMID: 37824590 DOI: 10.1371/journal.pone.0292798
    BACKGROUND: People with chronic neck pain (CNP) often present with impaired neck proprioception. The most widely used clinical test for assessing neck proprioception is cervical joint position sense which measures joint position error (JPE). This clinical test is typically performed using a laser pointer to examine the accuracy of returning to a neutral head position (NHP) or target head position (THP) following active neck movements. The aim of this study was to determine the measurement properties of JPE using a laser pointer when tested in people with and without CNP under a variety of different testing conditions (i.e., different movement directions, sitting versus standing, NHP versus THP).

    METHODS: Forty-three participants (23 asymptomatic and 20 with CNP) underwent neck proprioception testing, returning to a NHP and THP in both sitting and standing positions (six trials for each test). A laser pointer was secured on the participant's forehead and inertial measurement unit (IMU) sensors were placed beneath the laser pointer and at the level of the spinous process of the seventh cervical vertebra. Both the absolute and the constant JPE were assessed.

    FINDINGS: For the asymptomatic participants, good reliability (ICC: 0.79) was found only for right rotation of the THP task in sitting. In standing, good reliability (ICC: 0.77) was only found in flexion for the THP task. In standing, good reliability (ICC: 0.77) was only found for right rotation of the THP for the absolute JPE and left rotation (ICC: 0.85) for the constant error of the NHP task. In those with CNP, when tested in sitting, good reliability was found for flexion (ICC: 0.8) for the absolute JPE and good reliability (ICC range: 0.8-0.84) was found for flexion, extension, and right rotation for the constant JPE. In standing, good reliability (ICC range: 0.81-0.88) was found for flexion, and rotation for the absolute JPE. The constant JPE showed good reliability (ICC: 0.85) for right rotation and excellent reliability (ICC: 0.93) for flexion. Validity was weak to strong (r range: 0.26-0.83) and moderate to very strong (r range: 0.47-0.93) for absolute and constant error respectively, when tested in sitting. In standing, the validity was weak to very strong (0.38-0.96) for the absolute JPE and moderate to very strong (r range: 0.54-0.92) for the constant JPE.

    CONCLUSION: The reliability of the measure of JPE when tested in sitting and standing in both groups showed good reliability, but not for all movements. The results of the current study also showed that the laser pointer correlated well with the Noraxon IMUs, but not for all movements. The results of the current study support the use of the JPE using a laser pointer in clinical and research settings.

    Matched MeSH terms: Range of Motion, Articular
  8. Ziaee M, Hejazi F
    PLoS One, 2023;18(8):e0290248.
    PMID: 37590241 DOI: 10.1371/journal.pone.0290248
    Coulomb friction is considered as a mechanical approach to diminish the structural responses during the excitations. However, in case of severe oscillations supplementary mechanisms are employed besides the friction to mitigate the destructive effects of the vibrations in structures. Therefore, the main goal of this research is to develop a new Hybrid System (HS) which is a parallel combination of Viscous Damping (VD) and Coulomb friction for structures subjected to dynamic load. To achieve this goal, the effect of viscous damper is embedded in the equation of motion which is proposed by Den Hartog for a Single-Degree-of-Freedom (SDOF) Coulomb system, and has been extensively implemented for past few decades. In the considered numerical example in this study, implementing the proposed HDM in system resulted in decreasing the maximum displacement in the range of 1% to 98% for different amounts of force amplitude and viscous damping ratios. Also, applying the proposed HDM increased the time lag for about up to 24% for the frequency ratios greater than 1. The developed hybridized system in this study can be utilised as new generation of Tuned Mass Damper (TMD) to improve their energy dissipating efficiency under severe excitations.
    Matched MeSH terms: Motion
  9. Badrasawi M, Hamdan M, Vanoh D, Zidan S, ALsaied T, Muhtaseb TB
    PLoS One, 2022;17(11):e0276967.
    PMID: 36395173 DOI: 10.1371/journal.pone.0276967
    INTRODUCTION: Fear of falling has serious implications for health and is an important threat to autonomy. The purpose of this cross-sectional study was to investigate risk factors for fear of falling among Palestinian older adults in Hebron district.

    METHODS: A cross-sectional study was conducted among Palestinians > 60 years living in Hebron, West Bank. The Falls Efficacy Scale-International was used to predict falls among Palestinian older adults. Moreover, socio-demographic data, medical history, lifestyle habits, body composition, nutritional status, cognitive status (using the Montreal cognitive assessment tool), and functional status (using activities of daily living and instrumental activities of daily living scale), the presence of depressive symptoms (using geriatric depression scale), and physical fitness performance (using senior fitness test) were collected through an interview-based questionnaire. Data were analyzed using univariate and multivariate approach.

    RESULTS: A total of 200 participants were included in the study; 137 (68.5%) females and 63 (31.5%) males. Mean age was 70.5 ± 5.7 years, ranged from 65 to 98 years old. Fear of falling was significantly higher among older adults with advanced aged, living in villages or camps, low educational level, and being married (p < 0.05). Functional status (ADL and IADL), physical fitness status (timed up and go), and depression symptoms were significantly related to fear of falling (p < 0.05).

    CONCLUSION: High concern of falling is significantly associated with advanced age, low education level, being married, and living in villages or camps. ADLs were among the factors that had a significant relationship with increased fear of falling. Predictors of fear of falling among Palestinian older adults were IADL scores, body fat percentage, rapid gait speed, timed up and go test. Future studies could investigate further correlates of fear of falling among older adults.

    Matched MeSH terms: Time and Motion Studies
  10. Teng XJ, Ng WM, Chong WH, Chan DJC, Mohamud R, Ooi BS, et al.
    Langmuir, 2021 08 03;37(30):9192-9201.
    PMID: 34255525 DOI: 10.1021/acs.langmuir.1c01345
    The changes in the transport behavior of a microswimmer before and after cargo loading are crucial to understanding and control of the motion of a biohybrid microbot. In this work, we show the change in swimming behavior of biflagellated microalgae Chlamydomonas reinhardtii picking up a 4.5 μm polystyrene microbead upon collision. The microswimmer changed from linear forward motion into helical motion upon the attachment of the cargo and swam with a decreased swimming velocity. We revealed the helical motion of the microswimmer upon cargo loading due to suppression of flagella by image analysis of magnified time-lapse images of C. reinhardtii with one microbead attached at the anterior end (between the flagella). Furthered suppression on the flagellum imposed by the loading of the second cargo has led to increased oscillation per displacement traveled and decreased swimming velocity. Moreover, the microswimmer with a microbead attached at the posterior end swam with swimming velocity close to free swimming microalgae and did not exhibit helical swimming behavior. The experimental results and analysis showed that the loading location of the cargo has a great influence over the swimming behavior of the microswimmer. Furthermore, the work balance calculation and mathematical analysis based on Lighthill's model are well consistent with our experimental findings.
    Matched MeSH terms: Motion
  11. Teo YX, Chan YS, Gouwanda D, Gopalai AA, Nurzaman SG, Thannirmalai S
    Sci Rep, 2021 07 22;11(1):15020.
    PMID: 34294775 DOI: 10.1038/s41598-021-94268-4
    Although global demand for palm oil has been increasing, most activities in the oil palm plantations still rely heavily on manual labour, which includes fresh fruit bunch (FFB) harvesting and loose fruit (LF) collection. As a result, harvesters and/or collectors face ergonomic risks resulting in musculoskeletal disorder (MSD) due to awkward, extreme and repetitive posture during their daily work routines. Traditionally, indirect approaches were adopted to assess these risks using a survey or manual visual observations. In this study, a direct measurement approach was performed using Inertial Measurement Units, and surface Electromyography sensors. The instruments were attached to different body parts of the plantation workers to quantify their muscle activities and assess the ergonomics risks during FFB harvesting and LF collection. The results revealed that the workers generally displayed poor and discomfort posture in both activities. Biceps, multifidus and longissimus muscles were found to be heavily used during FFB harvesting. Longissimus, iliocostalis, and multifidus muscles were the most used muscles during LF collection. These findings can be beneficial in the design of various assistive tools which could improve workers' posture, reduce the risk of injury and MSD, and potentially improve their overall productivity and quality of life.
    Matched MeSH terms: Range of Motion, Articular*
  12. Yoon KH, Kim JS, Park JY, Park SY, Kiat RYD, Kim SG
    Knee Surg Sports Traumatol Arthrosc, 2021 Jun;29(6):1936-1943.
    PMID: 32914218 DOI: 10.1007/s00167-020-06266-0
    PURPOSE: To compare clinical and radiological outcomes and failure rates between anatomical and high femoral tunnels in remnant-preserving single-bundle posterior cruciate ligament (PCL) reconstruction.

    METHODS: 63 patients who underwent remnant-preserving single-bundle PCL reconstruction between 2011 and 2018 with a minimum 2-year follow-up were retrospectively reviewed. Patients were divided into two groups according to the femoral tunnel position: group A (33 patients with anatomical femoral tunnel) and group H (30 patients with high femoral tunnels). The femoral tunnel was positioned at the center (group A) or upper margin (group H) of the remnant anterolateral bundle. The position of the femoral tunnel was evaluated using the grid method on three-dimensional computed tomography. Clinical and radiological outcomes and failure rates were compared between the groups at the 2-year follow-up.

    RESULTS: The position of the femoral tunnel was significantly high in group H than in group A (87.4% ± 4.2% versus 76.1% ± 3.7%, p motion, and posterior drawer test. Radiological outcomes also showed no intergroup differences in the side-to-side differences of posterior tibial translation and osteoarthritis progression. Side-to-side difference on the Telos stress radiograph was 5.2 ± 2.9 mm in group A and 5.2 ± 2.7 mm in group H (n.s.). There were four failures in group A (12.1%) and one in group H (3.3%). The differences between the groups were not statistically significant.

    CONCLUSION: The clinical and radiological outcomes and failure rates of the high femoral tunnels were comparable with those of the anatomical femoral tunnels at the 2-year follow-up after remnant-preserving single-bundle PCL reconstruction. The findings of this study suggest that high femoral tunnels can be considered an alternative in remnant-preserving single-bundle PCL reconstruction.

    LEVEL OF EVIDENCE: III.

    Matched MeSH terms: Range of Motion, Articular
  13. Alsabery AI, Tayebi T, Kadhim HT, Ghalambaz M, Hashim I, Chamkha AJ
    J Adv Res, 2021 May;30:63-74.
    PMID: 34026287 DOI: 10.1016/j.jare.2020.09.008
    Introduction: Mixed convection flow and heat transfer within various cavities including lid-driven walls has many engineering applications. Investigation of such a problem is important in enhancing the performance of the cooling of electric, electronic and nuclear devices and controlling the fluid flow and heat exchange of the solar thermal operations and thermal storage.

    Objectives: The main aim of this fundamental investigation is to examine the influence of a two-phase hybrid nanofluid approach on mixed convection characteristics including the consequences of varying Richardson number, number of oscillations, nanoparticle volume fraction, and dimensionless length and dimensionless position of the solid obstacle.

    Methods: The migration of composite hybrid nanoparticles due to the nano-scale forces of the Brownian motion and thermophoresis was taken into account. There is an inner block near the middle of the enclosure, which contributes toward the flow, heat, and mass transfer. The top lid cover wall of the enclosure is allowed to move which induces a mixed convection flow. The impact of the migration of hybrid nanoparticles with regard to heat transfer is also conveyed in the conservation of energy. The governing equations are molded into the non-dimensional pattern and then explained using the finite element technique. The effect of various non-dimensional parameters such as the volume fraction of nanoparticles, the wave number of walls, and the Richardson number on the heat transfer and the concentration distribution of nanoparticles are examined. Various case studies for Al2O3-Cu/water hybrid nanofluids are performed.

    Results: The results reveal that the temperature gradient could induce a notable concentration variation in the enclosure.

    Conclusion: The location of the solid block and undulation of surfaces are valuable in the control of the heat transfer and the concentration distribution of the composite nanoparticles.

    Matched MeSH terms: Motion
  14. Abdal S, Hussain S, Siddique I, Ahmadian A, Ferrara M
    Sci Rep, 2021 Apr 08;11(1):7799.
    PMID: 33833251 DOI: 10.1038/s41598-021-86953-1
    It is a theoretical exportation for mass transpiration and thermal transportation of Casson nanofluid over an extending cylindrical surface. The Stagnation point flow through porous matrix is influenced by magnetic field of uniform strength. Appropriate similarity functions are availed to yield the transmuted system of leading differential equations. Existence for the solution of momentum equation is proved for various values of Casson parameter [Formula: see text], magnetic parameter M, porosity parameter [Formula: see text] and Reynolds number Re in two situations of mass transpiration (suction/injuction). The core interest for this study aroused to address some analytical aspects. Therefore, existence of solution is proved and uniqueness of this results is discussed with evaluation of bounds for existence of solution. Results for skin friction factor are established to attain accuracy for large injection values. Thermal and concentration profiles are delineated numerically by applying Runge-Kutta method and shooting technique. The flow speed retards against M, [Formula: see text] and [Formula: see text] for both situations of mass injection and suction. The thermal boundary layer improves with Brownian and thermopherotic diffusions.
    Matched MeSH terms: Motion
  15. Sukari AAA, Singh S, Bohari MH, Idris Z, Ghani ARI, Abdullah JM
    Malays J Med Sci, 2021 Apr;28(2):100-105.
    PMID: 33958964 DOI: 10.21315/mjms2021.28.2.9
    Background: This paper outlines a summary of examination technique to identify the range of movement of the cervical spine. Due to common difficulties in obtaining tools for cervical examination within the district, a standardised compilation of easy-to-replicate examination techniques are provided using different tools.

    Methods: Bedside instruments that can be used includes a measuring tape, compass, goniometer, inclinometer and cervical range of motion (CROM) instrument.

    Discussion: Cervical flexion-extension, lateral flexion and rotation will be assessed with bedside instruments. This would aid in increasing accuracy and precision of objective measurement while conducting clinical examination to determine the cervical range of motion.

    Matched MeSH terms: Range of Motion, Articular
  16. Hanim A, Wafiuddin M, Azfar MA, Awang MS, Nik Abdul Adel NA
    Cureus, 2021 Mar 22;13(3):e14043.
    PMID: 33898129 DOI: 10.7759/cureus.14043
    Introduction This appears to be the first biomechanical study that compares the stability of various locations of the crossing points in crossed pinning Kirschner wiring (K-wire) construct in treating pediatric supracondylar humerus fracture (SCHF). Additionally, this study compared the biomechanical stability between crossed pinning K-wire construct and the three-lateral divergent K-wire construct. Methods For the study purpose, 30 synthetic humerus bones were osteotomised at mid-olecranon fossa, anatomically reduced, and pinned using two 1.6-millimeter K-wires in five different constructs. A total of six samples were prepared for each construct and tested for extension, flexion, valgus, varus, internal rotation, and external rotation forces. Results As for crossed pinning K-wire construct, the center crossing point emerged as the stiffest construct in both linear and rotational forces, in comparison to the lateral crossing point, superior crossing, and medial crossing point Conclusion Based on this analysis, it is highly recommended that, if the crossed pinning construct is selected to treat supracondylar humerus fracture, the surgeon should aim for center crossing point as it is the most stable construct. Nevertheless, if lateral and superior crossing points are obtained during the initial attempt of fixation, the fixation may be accepted without revising the K-wire as the stability of these two constructs are comparable and portrayed no significant difference when compared to that of the center crossing point. Additionally, it is essential to avoid the medial crossing point as it is significantly less stable in terms of rotational force when compared to the center crossing point.
    Matched MeSH terms: Range of Motion, Articular
  17. Ghalambaz M, Mehryan SAM, Hajjar A, Shdaifat MYA, Younis O, Talebizadehsardari P, et al.
    Molecules, 2021 Mar 09;26(5).
    PMID: 33803488 DOI: 10.3390/molecules26051496
    A wavy shape was used to enhance the thermal heat transfer in a shell-tube latent heat thermal energy storage (LHTES) unit. The thermal storage unit was filled with CuO-coconut oil nano-enhanced phase change material (NePCM). The enthalpy-porosity approach was employed to model the phase change heat transfer in the presence of natural convection effects in the molten NePCM. The finite element method was applied to integrate the governing equations for fluid motion and phase change heat transfer. The impact of wave amplitude and wave number of the heated tube, as well as the volume concertation of nanoparticles on the full-charging time of the LHTES unit, was addressed. The Taguchi optimization method was used to find an optimum design of the LHTES unit. The results showed that an increase in the volume fraction of nanoparticles reduces the charging time. Moreover, the waviness of the tube resists the natural convection flow circulation in the phase change domain and could increase the charging time.
    Matched MeSH terms: Motion
  18. Subash Y
    Malays Orthop J, 2021 Mar;15(1):48-54.
    PMID: 33880148 DOI: 10.5704/MOJ.2103.008
    Introduction: Fractures of the proximal tibia are high velocity injuries often associated with soft tissue compromise especially in the type V and VI fracture patterns. Dual plating is the preferred treatment option for these injuries but not in a setting where there is extensive soft tissue injury, as this can lead to problems with wound healing. The aim of this study was to evaluate the functional outcome following hybrid external fixation in the management of Schatzkers type V and VI fractures.

    Materials and Methods: A total of 30 patients with type V and VI proximal tibial fractures who presented between January 2012 to January 2015 were managed with hybrid external fixation and were followed-up for a period of 3 years.

    Results: The mean age of the patients was 42.26 years with the left knee being more commonly affected. Schatzkers type V was the more common fracture type seen. The mean time to union was 12.06 weeks and the average range of motion achieved was 0 to 100°. The mean Rasmussens functional score was 25.4 at last follow-up and we had excellent results in 5 patients and good results in 22 patients.

    Conclusion: Through this study, we conclude that the hybrid external fixation is an excellent option in the type V and VI fractures with extensive soft tissue compromise. It is easy to apply, facilitates early mobilisation of the joint and gives good functional results.

    Matched MeSH terms: Range of Motion, Articular
  19. Sam CX, Anwar AZ, Ahmad AR, Solayar GN
    Malays Orthop J, 2021 Mar;15(1):119-123.
    PMID: 33880158 DOI: 10.5704/MOJ.2103.018
    Introduction: Reverse total shoulder arthroplasty provides a surgical alternative to standard total shoulder arthroplasty for the treatment of cuff tear arthropathy, arthritis and fracture sequelae. This study aimed to assess the short-term outcomes following reverse total shoulder arthroplasty for patients in a large public hospital in Malaysia.

    Materials and Methods: We identified and performed five primary reverse total shoulder arthroplasties between 1 May 2019 and 1 June 2020. All patients were contactable and available for analysis. Assessment of functional outcomes was performed using the Constant-Murley score, the patient satisfaction score (PSS), and imaging studies. The mean follow-up from operation to the time of reporting was 9.6 months (range, 3 to 14 months).

    Results: The median age for our patients was 58 years (±11.91). The most common indication for surgery was post-traumatic arthritis, followed by rotator cuff arthropathy and osteoarthritis. The mean Constant score improved from 9.0 pre-operatively to 52.3 post-operatively at a mean of 9.6 months. The majority of the patients were satisfied with the surgery as the post-operative range of motion, especially anterior elevation and abduction, improved in four of our patients and there were no short-term complications, for example, of infection or revisions, reported at the last follow-up.

    Conclusion: This study has shown that reverse total shoulder arthroplasty can yield good short-term outcomes for the treatment of complex shoulder problems in addition to cuff tear arthropathy. It should be considered a treatment for rotator cuff tears, severe arthritis and ≥ 3 parts proximal humeral fractures.

    Matched MeSH terms: Range of Motion, Articular
  20. Yap YT, Gouwanda D, Gopalai AA, Chong YZ
    Med Biol Eng Comput, 2021 Mar;59(3):711-720.
    PMID: 33625670 DOI: 10.1007/s11517-021-02337-7
    Asymmetrical stiff knee gait is a mechanical pathology that can disrupt lower extremity muscle coordination. A better understanding of this condition can help identify potential complications. This study proposes the use of dynamic musculoskeletal modelling simulation to investigate the effect of induced mechanical perturbation on the kneeand to examine the muscle behaviour without invasive technique. Thirty-eight healthy participants were recruited. Asymmetrical gait was simulated using knee brace. Knee joint angle, joint moment and knee flexor and extensor muscle forces were computed using OpenSim. Differences inmuscle force between normal and abnormal conditions were investigated using ANOVA and Tukey-Kramer multiple comparison test.The results revealed that braced knee experienced limited range of motion with smaller flexion moment occuring at late swing phase. Significant differences were found in all flexormuscle forces and in several extensor muscle forces (p<0.05). Normal knee produced larger flexor muscle force than braced knee. Braced knee generated the largest extensor muscle force at early swing phase. In summary, musculoskeletal modelling simulation can be a computational tool to map and detect the differences between normal and asymmetrical gaits.
    Matched MeSH terms: Range of Motion, Articular
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links