Epoxidised Natural Rubber (ENR) is now a commercially available polymer produced by chemical modification of natural rubber. Currently, three types of ENR are commercially available, and these are ENR 10, ENR 25, and ENR 50 with 10%, 25%, and 50% mol epoxidation, respectively. Studies on prevulcanisation of ENR 50 and postvulcanisation of the latex films were carried out. The objective of this study was to develop ENR 50 that could be dipped easily in coagulant dipping solution to produce dipped products. Several attempts were made by compounding prevulcanised ENR 50 at various sulphur levels ranging from 0.5 to 3.0 pphr. Using suitable coagulant dipping systems, ENR 50 film could be formed despite the high contents of non-ionic surfactant. It was found that the tensile strength of prevulcanised ENR 50 film decreased with the increase in the sulphur level. The results show that as level of sulphur increased, M300 also increased to an optimum value of 1.5 pphr of sulphur. For the postvulcanised ENR 50 film, however, the tensile strength increased and then decreased with the increasing sulphur level. Meanwhile M300 increased with the increasing postvulcanization time and sulphur level. The postvulcanisation of ENR 50 film seems to be a more effective way of increasing tensile properties than by prevulcanisation of ENR 50.
The Short Form Health Survey SF-36 is a well-known generic health-related quality of life measure that has widely been used worldwide. However, given the cultural, social and ethnic differences in some countries, it might not follow the intended structure of the instrument. Hence, this study aims to determine the psychometric properties of the Malay version of Short Form Health Survey (SF-12) among postpartum mothers. A cross-sectional study was conducted among 1-month postpartum mothers attending Obstetric and Gynecology clinic, Universiti Sains Malaysia Hospital, Kelantan, Malaysia. Reliability was estimated using internal consistency and the factor structure was extracted by performing confirmatory factor analysis using SPSS v. 20 and AMOS v. 20. A total of 108 women responded. The mean (SD) score for the Physical Component Summary (PCS) score and Mental Component Summary (MCS) score were 43.3 (7.08) and 42.4 (6.87) respectively. The Cronbach alpha for PCS-12 was 0.749 and MCS-12 was 0.701. Spearman correlations of individual items and the SF-12 component summary scores showed PF, RP, BP and GH items correlated higher with the PCS score, whereas the VT, SF, RE, and MH items correlated higher with the MCS score lending support to its good convergent validity. The confirmatory factor solution showed final model with two factors structure and six items each with acceptable factor loadings, satisfactory absolute and parsimonious fitness (RMSEA=0.1, x2/df=2.4). The psychometric tests of the Malay version of SF-12 generally showed acceptable validity and reliability among postpartum women.
Study site: Obstretic and gynecology Hospital Universiti Sains Malaysia (HUSM)
Konjac glucomannan (KGM) was treated with or without sonication and/or hydrochloric acid (HCl).
Hydrolysis effects on KGM were studied for properties such as degree of hydrolysis, fluidity, molecular mass, and creep properties. The degree of hydrolysis for sonicated KGM and acid treated KGM were not significantly different. However, the combination treatment of acid hydrolysis and sonication was found effective in yielding a smaller molecular weight fraction of KGM and solution with higher fluidity. From the creep analysis, KGM treated with combination treatment exhibited the highest compliance among samples tested. In general, ultrasound mediated acid hydrolysis was found to be a promising technique in degrading high molecular weight biopolymer. This could be attributed to a localized high temperature and high shear forces generated during cavitation that facilitated the endothermic acid hydrolysis.
Thermal characterization of sugar palm fibre (SPF), reinforced high impact polystyrene (HIPS)
composites, was studied by means of thermogravimetric analysis. The effects of alkaline treatment and compatibilizing agent on the thermal stability of the composites were evaluated. Alkaline treatment was carried out by soaking the fibres in 4 and 6% of NaOH solution, while treatment with compatibilizing agent was employed by adding 2 and 3% maleic anhydride-graft-polystyrene (MA-g-PS) to the composites. Both the treatments were aimed to improve the mechanical performance of the composites. From the study, the thermal stability of the treated composites was found to be higher than that of untreated composites. It is shown that the incorporation of sugar palm fibre influences the degree of thermal stability of the composites. The treatments on composites also contributed to shifting the peak temperature of degradation of the composites. In other words, there are strong chemical reactions between the components of the treated composites. The thermal stability of the composites, with alkaline treatment and compatibilizing agent, was found to be better as compared to those of the untreated composites.
In the moving layer of particles with variable concentration, the shear estimation is not directly predictable and there is no existing clear mathematical or empirical formula to achieve this objective. This paper presents a developed approach to estimate the shear forces in a flow having suspended and moving layers of solid particles in liquid flow. The two-layer approach was taken whereby the flow consisting of one upper suspended layer of particles in the liquid, and the bottom layer was the moving bed of particles. In the present work, the method of finding the force acting on the pipe wall by the particles in the layer, termed as the ‘dry force’, was presented using a “pseudo hydrostatic pressure” method. To attain the equation for the dry force, a mathematical approach is taken with the assumptions that the flow is horizontal, two-phase pipe flow (solid in Newtonian liquid), incompressible and it is at steady-state. The analysis was conducted considering various particles densities, various concentrations in the suspended layer and different thicknesses of the moving bed. Changing the concentration in the suspended layer from 0.00001 up to 0.001 didn’t showed significant changes in the dry force evaluation. The dry friction force is increasing with increasing moving bed thickness. The developed mathematical model can be
applicable in solving for the shear force in horizontal solid liquid two-phase flows.
Tetragonal Y2O3 stabilized Zirconia (t-Y-ZrO2) powders were doped with Nb2O5 to seek a possibility if electronics doping would enhance the electronics conductivity of the insulating oxide. In this work Y2O3 was added as a stabilizer to produce tetragonal ZrO2 whereas Nb2O5 was added for the electronic doping. Several compositions of powders were prepared by thermal decomposition method and were post annealed at different temperatures. Precursor solutions were prepared from the mixture of zirconyl nitrate, yttrium nitrate and niobium tartarate as well as TEA (triethanolamine). The mixed solution were evaporated, pyrolysed and calcined to produce nanosized powders. The phase formation of the as-made powders was investigated by x-ray diffractometer. The additions of 7% Y2O3 were found to stabilize the tetragonal phase of zirconia.
The addition of Nb2O5 did not alter the stability of the tetragonal phase but it was found that the conductivity of the material has changed. The band gap as measured by the UV-Visible Spectrometer gave a value in the range of 2.97 to 5.01 eV. XRD was also used to deduce the crystallite size (by using Scherer’s equation) and transmission electron microcopy was used to view the particle sizes and shapes. The Nb doped t-Y-ZrO2 prepared in this work was to be nanosized crystal with size ranges from 7 nm to 15 nm.
This work aims at optimizing the media constituents for citric acid production from oil palm empty fruit bunches (EFB) as renewable resource using artificial neural networks (ANN) approach. The bioconversion process was done through solid state bioconversion using Aspergillus niger. ANN model was built using MATLAB software. A dataset consists of 20 runs from our previous work was used to develop ANN. The predictive and generalization ability of ANN and the results of RSM were compared. The determination coefficients (R2-value) for ANN and RSM models were 0.997 and 0.985, respectively, indicating the superiority of ANN in capturing the non-linear behavior of the system. Validation process was done and the maximum citric acid production (147.74 g/kg-EFB) was achieved using the optimal solution from ANN which consists of 6.1% sucrose, 9.2% mineral solution and 15.0% inoculum.
This paper presents the solution to a calculation of the pH of a very dilute solution of a weak acid, taking into account the effect of the hydroxonium ions generated from the ionization of the acid on the ionization of water, also a very weak acid. To be solved successfully, this calculation involves the concepts of conservation of charge, pH, equilibria and the application of the general solution to a cubic equation. Such an exercise requires the application of skills in algebra, and can provide a core of understanding that can prepare advanced students for many different sorts of calculations that represent real-life problems in the chemical sciences. A programme is presented in C++ which enables the work of students to be individualized so that each student in a class can work through a slightly different pH calculation, in such a way that a class supervisor can quickly check each student’s result for accuracy.This exercise is presented as a potential means of enabling students to undertake and master similar types of calculations involving the application of complex algebra to problems related to equilibria and solution dynamics.
This paper presents the solution to a calculation of the pH of a very dilute solution of a strong acid or base, taking into account the effect of the hydronium or hydroxyl ions generated from the ionisation of the strong acid or base on the ionisation of water, as a second very weak acid. To be solved successfully, this calculation involves the concepts of conservation of charge, pH and the application of the general solution to a quadratic equation. Such an exercise involves the application of skills in basic numeracy, and can provide a core of understanding that can prepare students for
many different sorts of calculations that represent reallife problems in the medical and biological sciences.A programme is presented in C++ which enables the work of students to be individualised so that each student in a class can work through a slightly different pH calculation, in such a way that a class supervisor can quickly check each student’s result for accuracy. This exercise is presented as a potential means of enabling students to undertake and master similar types of calculations involving simple or more complex equilibria.
α-Mangostin was extracted from the pericarp of the Malaysian local Garcinia mangostana linn., The structure was characterised by Infrared red, UV-Visible and Nuclear Magnetic Resonance spectroscopic data. The fluorescence peak at 500nm in ethanol was not observed in PNIPAM microgel solution. The increase of colloidal size of the gel in the presence of α-mangostin was studied by Dynamic Light Scattering and Transmission Electron Microscope. The size of the particle also increases with increasing temperature up to 45⁰C after which it began to shrink. The TEM micrograph at 45°C showed a uniformly structured pattern of the gel occurs in the range of the lowest solution critical temperature.
Lattice Boltzmann Model for Shallow Water Equation with Turbulence Modeling (LABSWETM) is used to study the flow patterns of sidewall friction effects. The lattice Boltzmann method (LBM) approach in recovery the macroscopic governing equation which is shallow water equation from the microscopic flow behavior of particle movement as described by kinetic theory is explored. With the solution of force term to be used in lattice Boltzmann equation, the boundary condition of LBM is explored. With the use of bed and wall friction coefficients, the importance of Manning’s coefficient in determining the outcome of flow patterns simulation is explained. For model verification, the model represents a straight channel with a circular cavity attached to it. The result of this simulation includes the water circulation patterns, cross-section of average velocity distribution, and water depth. For validation, the cross-sections of the model in term of velocity vectors are compared against alternative numerical and experimental data.
At present, research in composite materials is being directed at using natural fibres instead of synthetic fibres. Kenaf which is extensively grown in the Far East including Malaysia, has been identified as a bast (stem) fibre with significant market potential. In this work, long and random kenaf fibres (non-woven mat form) were used in the as-received condition and alkalized with a 0.06M NaOH solution. They were combined with polypropylene thin sheets, sandwiched between layers of kenaf fibres and hot-pressed to form natural fibre composites. The mechanical properties of the composites were investigated to observe the effect of fibre alignment, fibre treatment and pre-irradiation method used. A general trend was observed whereby alkalized and long fibre composites gave higher flexural modulus and flexural strength compared with random mat and untreated fibres. The long fibre composites also gave a higher work of fracture. However, the correlation between fibre surface treatment and the work of fracture was less clear. Pre-irradiation on the polypropylene pellets and fibres before the composite is manufactured showed significant improvement on the flexural modulus and flexural strength. The bond performance test performed on the treated composites demonstrated good bonding and interfacial adhesion between the fibre and matrix. However, the method of moulding used need to be improved to optimize the performance of the composites.
Introduction: The purpose of the present study was to investigate exploratory factor analysis of the
Beck Anxiety Inventory (BAI) and reports its reliability and validity in Malaysia. Method: One thousand
and ninety participants from four different samples (namely students, general population, medical and
psychiatric patients) completed the Malay version of Beck Anxiety Inventory, as well as additional
questionnaires such as Fear Questionnaire, Anxiety Sensitivity Index, Depression Anxiety Stress Scale, and Catastrophic Cognition Questionnaire. Results: Exploratory factor analysis revealed a three factor solution and accounted for 48.01% of the total variance. The three-factor structure appeared to be; subjective anxiety, autonomic, and neurophysiology. The Cronbach alpha coefficients (α) ranged from 0.66 to 0.89 with satisfactory overall alpha value (.91). Evidence was also found acceptable concurrent validity of the BAI-Malay (range between r=.22 to r=.67). Conclusion: This study shows that the BAIMalay is a reliable and valid instrument to measure symptoms of anxiety in the Malay population
and can be used in research and clinical service in Malaysia. However, replication of study by using
confirmatory factor analysis and application of the instrument among anxiety patients worth of further
investigation.
The purpose of this study was to determine the adsorption coefficient (Koc) of chlorpyrifos in clay soil by measuring the Freundlich adsorption coefficient (Kads(f)) and desorption coefficient (1/n value) of chlorpyrifos. It was found that the Freundlich adsorption coefficient (Kads(f)) and the linear regression (r 2 ) of the Freundlich adsorption isotherm for chlorpyrifos in the clay soil were 52.6 L/kg and 0.5344, respectively. Adsoprtion equilibrium time was achieved within 24 hours for clay soil. This adsoprtion equilibrium time was used to determine the effect of concentration on adsorption. The adsorption coefficient (Koc) of clay soil was found to be 2783 L/kg with an initial concentration solution of 1 µg/g, soil-solution ratio (1:5) at 30 o C when the equilibrium between the soil matrix and solution was 24 hours. The Kdes decreased over four repetitions of the desorption process. The chlorpyrifos residues may be strongly adsorbed onto the surface of clay.
Formalin is a clear solution of 37% formaldehyde in water. It is used in dentistry as a disinfectant, antiseptic and mainly as tissue fixative for preserving biologic specimens for histopathologic examination. The human knowledge on systemic formaldehyde intoxication is inadequate as only few cases of formalin ingestion have been reported. This paper presents a brief communication of the adverse effect of formalin to the human tissue.
Texture evolution of NiO formed during oxidation of polycrystalline single oriented (100) Ni-Cr was investigated. This foil was also termed rolling assisted biaxially textured substrate (RABiTS). X-ray diffractograms of oxidized Ni-Cr RABiTS foil showed the existence of mostly (200) NiO indicating (100)-type NiO formed exclusively on (100) singly oriented Ni-Cr grains. Epitaxial relationship between the two layers is observed. However the dual-in-plane texture was recorded.
The in-plane texture was assessed by conducting phi scan and plotting series of pole figures measured at (111) NiO peak. The mechanism of the oxides formation was proposed to take into account the formation of (100)-type NiO. Cross section morphology of the oxidised foils reveals two oxidation layers; fast growing external layer consisting of the (100)-type NiO and an internal layer consisted of mostly Cr2O3 and maybe NiCr2O4. The thickness of NiO was ~ 10Pm. Cr2O3 formed as needle-like oxides embedded in a matrix of Ni foil. Inward diffusion of oxygen is believed to have caused this to happen. The external NiO layer was consisted of duplex microstructure characterised by columnar layer growing vertical on the surface of the metal and a few micron thick of equiaxed NiO. Delamination of the outer NiO layer often occurred at the columnarequiaxed interface which could be cured by CeO2 deposition on the foil prior to the oxidation process. CeO2 was deposited by conversion immersion using Ce(NO3)3.6H2O solution. (200) NiO formed on this coated sample as well.
The impact of good assessment in medical education depends on how appropriately the tools measure the clinical performance and how reliable, valid and feasible they are to achieve the logical decision. The traditional methods of clinical examination using long and short cases and orals are often argued for its subjectivity, low reliability and inadequate context specificity. Oral test though comparatively more valid due to its face-to-face questions are considered less reliable for problems of unstandardized questions, inconsistent marking and lack of sufficient testing time. Development of an “objective structured clinical examination” (OSCE) was sought as a solution to these problems. But the fragmented representation of the context in a number of stations in OSCE makes it less authentic for an integrated judgment of performance. Yet another method to thought of, was the workplace-based assessment (WPBA) but it takes a snapshot as a predefined attribute of a more complex integrated assessment such as long case. However due to the problem of feasibility it is less likely that high stakes examination as summative assessment will ever be able to attain workplace-based assessment such as Mini-CEX and DOPS. A TOACS (task oriented assessment of clinical skills) format currently used in high stakes fellowship examination in one of the center and claimed to have more active role for examiners was analyzed and compared with OSCE. Author however, did not find a difference except the difference of acronyms of the two formats. Both have multiple, fragmented static or interactive stations of 5-10 minutes duration with or without examiners, patients or exhibits and a marking scheme comprising of checklist or global rating. In the backdrop of this context a new assessment format named the ‘task integrated objective structured clinical examination” or TIOSCE modified from OSCE is currently developed in School of Medical Sciences (SMS) at USM. However, it is a different version of OSCE in which though the principle concept is the same as that of an OSCE, the continuum of clinical skill’s work up of the same patient’s is followed through to test multiple short attributes of clinical competences. As it retains most of the favorable features, TIOSCE also addresses some of the odds features of OSCE.
Dye-sensitized solar cell (DSSC) is the third generation of thin film solar cell. In this work, carrot fruit dye was prepared and used in DSSC as a sensitizer. TiO2–ZrO2 fine binary oxide was mechanochemically prepared and made paste. TiO2–ZrO2 paste (colloidal) was deposited onto FTO/glass in two ways, i.e. as single and double coatings by rolling method. It was immersed in the carrot solution to get dyed cell. The dyed TiO2-ZrO2-FTO/glass cell was offset with the FTO/glass cell coated with adhesive carbon paste. Photovoltaic properties of prepared TiO2–ZrO2 DSSC cell were measured. Results showed that the efficiency of double coating cell was greater than that of the single coating cell. According to the fill factor from the experiments, both the DSSC cells were acceptable for industrial requirement. Hence, it can be concluded that the results obtained were acceptable in the use of cost-effective and eco-favourable dye-sensitized solar cell.
A stability-indicating HPLC-UV method for the simultaneous determination of sildenafil citrate and dapoxetine hydrochloride in solution and tablet was developed. The mobile phase was comprised of acetonitrile and 0.2M ammonium acetate buffer. The analyte was eluted at 3.392min and 7.255min for sildenafil citrate and dapoxetine HCl respectively using gradient system at a flow rate of 1.5mL/min. The theoretical plates count was>2000, tailing factor
In this paper, an implicit 2-point Block Backward Differentiation formula (BBDF) method was considered for solving Delay Differential Equations (DDEs). The method was implemented by using a constant stepsize via Newton Iteration. This implicit block method was expected to produce two points simultaneously. The efficiency of the method was compared with the existing classical 1-point Backward Differentiation Formula (BDF) in terms of execution time and accuracy.