Displaying publications 1 - 20 of 50 in total

Abstract:
Sort:
  1. Bidin, N.
    ASM Science Journal, 2008;2(2):179-182.
    MyJurnal
    The laser technology laboratory (LTL) of the Physics Department, University of Technology Malaysia was established in 1989 to support research and development activities. The laboratory provides activities for short- and long-term projects to serve final year undergraduate and post-graduate students in masters and PhD programmes.
    Matched MeSH terms: Physics
  2. Jesudason, C.G.
    ASM Science Journal, 2007;1(1):7-18.
    MyJurnal
    Molecular dynamics reaction simulation showed that the rate constant is not constant over the concentration profile of reactants and products over a fixed temperature regime, and this variation is expressed in terms of the defined reactivity coefficients. The ratio of these coefficients for the forward and backward reactions were found to equal that of the activity coefficient ratio for the product and reactant species. A theory was developed to explain kinetics in general based on these observations. Several other theorems had first to be developed, most striking of all was the inference that the excess Helmholtz free energy was the thermodynamical function which had a direct relation to these activity factors than the Gibbs free energy. The theory is applied to a class of ionic reactions which could not be rationalized using the standard Bjørn-Bjerrum theory of ionic reactions.
    Matched MeSH terms: Physics
  3. Alanazi A, Alkhorayef M, Alzimami K, Jurewicz I, Abuhadi N, Dalton A, et al.
    Appl Radiat Isot, 2016 Nov;117:106-110.
    PMID: 26777569 DOI: 10.1016/j.apradiso.2016.01.001
    Graphite ion chambers and semiconductor diode detectors have been used to make measurements in phantoms but these active devices represent a clear disadvantage when considered for in vivo dosimetry. In such circumstance, dosimeters with atomic number similar to human tissue are needed. Carbon nanotubes have properties that potentially meet the demand, requiring low voltage in active devices and an atomic number similar to adipose tissue. In this study, single-wall carbon nanotubes (SWCNTs) buckypaper has been used to measure the beta particle dose deposited from a strontium-90 source, the medium displaying thermoluminescence at potentially useful sensitivity. As an example, the samples show a clear response for a dose of 2Gy. This finding suggests that carbon nanotubes can be used as a passive dosimeter specifically for the high levels of radiation exposures used in radiation therapy. Furthermore, the finding points towards further potential applications such as for space radiation measurements, not least because the medium satisfies a demand for light but strong materials of minimal capacitance.
    Matched MeSH terms: Health Physics/instrumentation; Health Physics/methods
  4. Bradley DA, Nawi SNM, Khandaker MU, Almugren KS, Sani SFA
    Appl Radiat Isot, 2020 Jul;161:109168.
    PMID: 32321700 DOI: 10.1016/j.apradiso.2020.109168
    Present work concerns polymer pencil-lead graphite (PPLG) and the potential use of these in elucidating irradiation-driven structural alterations. The study provides detailed analysis of radiation-induced structural interaction changes and the associated luminescence that originates from the energy absorption. Thermally stimulated emission from the different occupied defect energy levels reflects the received radiation dose, different for the different diameter PPLGs. The PPLG samples have been exposed to photon irradiation, specifically x-ray doses ranging from 1 to 10 Gy, extended to 30-200 Gy through use of a60Co gamma-ray source. Trapping parameters such as order of kinetics, activation energy and frequency factor are estimated using Chen's peak-shape method for a fixed-dose of 30 Gy. X-ray diffractometry was used to characterize the crystal structure of the PPLG, the aim being to identify the degree of structural order, atomic spacing and lattice constants of the various irradiated PPLG samples. The mean atomic spacing and degree of structural order for the different diameter PPLG are found to be 0.3332 nm and 26.6° respectively. Photoluminescence spectra from PPLG arising from diode laser excitation at 532 nm consist of two adjacent peaks, 602 nm (absorption) and 1074 nm (emission), with mean energy band gap values within the range 1.113-1.133 eV.
    Matched MeSH terms: Physics
  5. Ng KH, Cheung KY, Hu YM, Inamura K, Kim HJ, Krisanachinda A, et al.
    Australas Phys Eng Sci Med, 2009 Dec;32(4):175-9.
    PMID: 20169835
    This document is the first of a series of policy statements being issued by the Asia-Oceania Federation of Organizations for Medical Physics (AFOMP). The document was developed by the AFOMP Professional Development Committee (PDC) and was endorsed for official release by AFOMP Council in 2006. The main purpose of the document was to give guidance to AFOMP member organizations on the role and responsibilities of clinical medical physicists. A definition of clinical medical physicist has also been provided. This document discusses the following topics: professional aspects of education and training; responsibilities of the clinical medical physicist; status and organization of the clinical medical physics service and the need for clinical medical physics service.
    Matched MeSH terms: Health Physics/education*
  6. Ng KH
    Australas Phys Eng Sci Med, 2008 Jun;31(2):85-9.
    PMID: 18697700
    From the time when Roentgen and other physicists made the discoveries which led to the development of radiology, radiotherapy and nuclear medicine, medical physicists have played a pivotal role in the development of new technologies that have revolutionized the way medicine is practiced today. Medical physicists have been transforming scientific advances in the research laboratories to improving the quality of life for patients; indeed innovations such as computed tomography, positron emission tomography and linear accelerators which collectively have improved the medical outcomes for millions of people. In order for radiation-delivery techniques to improve in targeting accuracy, optimal dose distribution and clinical outcome, convergence of imaging and therapy is the key. It is timely for these two specialties to work closer again. This can be achieved by means of cross-disciplinary research, common conferences and workshops, and collaboration in education and training for all. The current emphasis is on enhancing the specific skill development and competency of a medical physicist at the expense of their future roles and opportunities. This emphasis is largely driven by financial and political pressures for optimizing limited resources in health care. This has raised serious concern on the ability of the next generation of medical physicists to respond to new technologies. In addition in the background loom changes of tsunami proportion. The clearly defined boundaries between the different disciplines in medicine are increasingly blurred and those between diagnosis, therapy and management are also following suit. The use of radioactive particles to treat tumours using catheters, high-intensity focused ultrasound, electromagnetic wave ablation and photodynamic therapy are just some areas challenging the old paradigm. The uncertainty and turf battles will only explode further and medical physicists will not be spared. How would medical physicists fit into this changing scenario? We are in the midst of molecular revolution. Are we prepared to explore the newer technologies such as nanotechnology, drug discovery, pre-clinical imaging, optical imaging and biomedical informatics? How are our curricula adapting to the changing needs? We should remember the late Professor John Cameron who advocated imagination and creativity - these important attributes will make us still relevant in 2020 and beyond. To me the future is clear: "To achieve more, we should imagine together."
    Matched MeSH terms: Health Physics/education*; Health Physics/trends*
  7. Ng K, Pirabul R, Peralta A, Soejoko D
    Australas Phys Eng Sci Med, 1997 Mar;20(1):27-32.
    PMID: 9141310
    In recent years there has been a significant economic growth in South East Asia, along with it a concurrent development of medical physics. The status of four countries--Malaysia, Thailand, the Philippines and Indonesia are presented. Medical physicists in these countries have been experiencing the usual problems of lack of recognition, low salaries, and insufficient facilities for education and training opportunities. However the situation has improved recently through the initiative of local enthusiastic medical physicists who have started MS graduate programs in medical physics and begun organizing professional activities to raise the profile of medical physics. The tremendous support and catalytic roles of the American Association of Physicists in Medicine (AAPM) and international organizations such as International Organization for Medical Physics (IOMP), International Atomic Energy Agency (IAEA), World Health Organization (WHO), and International Center for Theoretical Physics (ICTP) have been instrumental in achieving progress. Contributions by these organizations include co-sponsorship of workshops and conferences, travel grants, medical physics libraries programs, and providing experts and educators. The demand for medical physicists is expected to rise in tandem with the increased emphasis on innovative technology for health care, stringent governmental regulation, and acceptance by the medical community of the important role of medical physicists.
    Matched MeSH terms: Biophysics/trends*; Physics/trends*
  8. Ng Kh, Wong J
    Biomed Imaging Interv J, 2008 Apr;4(2):e21.
    PMID: 21614324 DOI: 10.2349/biij.4.2.21
    Informal discussion started in 1996 and the South East Asian Federation of Organizations for Medical Physics (SEAFOMP) was officially accepted as a regional chapter of the IOMP at the Chicago World Congress in 2000 with five member countries, namely Indonesia, Malaysia, Philippines, Singapore and Thailand. Professor Kwan-Hoong Ng served as the founding president until 2006. Brunei (2002) and Vietnam (2005) joined subsequently. We are very grateful to the founding members of SEAFOMP: Anchali Krisanachinda, Kwan-Hoong Ng, Agnette Peralta, Ratana Pirabul, Djarwani S Soejoko and Toh-Jui Wong.The objectives of SEAFOMP are to promote (i) co-operation and communication between medical physics organizations in the region; (ii) medical physics and related activities in the region; (iii) the advancement in status and standard of practice of the medical physics profession; (iv) to organize and/or sponsor international and regional conferences, meetings or courses; (v) to collaborate or affiliate with other scientific organizations.SEAFOMP has been organizing a series of congresses to promote scientific exchange and mutual support. The South East Asian Congress of Medical Physics (SEACOMP) series was held respectively in Kuala Lumpur (2001), Bangkok (2003), Kuala Lumpur (2004) and Jakarta (2006). The respective congress themes indicated the emphasis and status of development. The number of participants (countries in parentheses) was encouraging: 110 (17), 150 (16), 220 (23) and 126 (7).In honour of the late Professor John Cameron, an eponymous lecture was established. The inaugural John Cameron Lecture was delivered by Professor Willi Kalender in 2004. His lecture was titled "Recent Developments in Volume CT Scanning".
    Matched MeSH terms: Physics
  9. Woo M, Ng Kh
    Biomed Imaging Interv J, 2008 Jan;4(1):e13.
    PMID: 21614306 MyJurnal DOI: 10.2349/biij.4.1.e13
    Medical physics is a relatively small professional community, usually with a scarcity of expertise that could greatly benefit students entering the field. However, the reach of the profession can span great geographical distances, making the training of students a difficult task. In addition to the requirement of training new students, the evolving field of medical physics, with its many emerging advanced techniques and technologies, could benefit greatly from ongoing continuing education as well as consultation with experts.Many continuing education courses and workshops are constantly being offered, including many web-based study courses and virtual libraries. However, one mode of education and communication that has not been widely used is the real-time interactive process. Video-based conferencing systems do exist, but these usually require a substantial amount of effort and cost to set up.The authors have been working on promoting the ever-expanding capability of the Internet to facilitate the education of medical physics to students entering the field. A pilot project has been carried out for six years and reported previously. The project is a collaboration between the Department of Medical Physics at the Toronto Odette Cancer Centre in Canada and the Department of Biomedical Imaging at the University of Malaya in Malaysia. Since 2001, medical physics graduate students at the University of Malaya have been taught by lecturers from Toronto every year, using the Internet as the main tool of communication.The pilot study explored the different methods that can be used to provide real-time interactive remote education, and delivered traditional classroom lectures as well as hands-on workshops.Another similar project was started in 2007 to offer real-time teaching to a class of medical physics students at Wuhan University in Hubei, China. There are new challenges as well as new opportunities associated with this project. By building an inventory of tools and experiences, the intent is to broaden the real-time teleteaching method to serve a wide community so that future students entering the field can have efficient access to high-quality education that will benefit the profession in the long term.
    Matched MeSH terms: Physics
  10. Lan BL
    Chaos, 2006 Sep;16(3):033107.
    PMID: 17014212
    The dynamics of a periodically delta-kicked Hamiltonian system moving at low speed (i.e., at speed much less than the speed of light) is studied numerically. In particular, the trajectory of the system predicted by Newtonian mechanics is compared with the trajectory predicted by special relativistic mechanics for the same parameters and initial conditions. We find that the Newtonian trajectory, although close to the relativistic trajectory for some time, eventually disagrees completely with the relativistic trajectory, regardless of the nature (chaotic, nonchaotic) of each trajectory. However, the agreement breaks down very fast if either the Newtonian or relativistic trajectory is chaotic, but very much slower if both the Newtonian and relativistic trajectories are nonchaotic. In the former chaotic case, the difference between the Newtonian and relativistic values for both position and momentum grows, on average, exponentially. In the latter nonchaotic case, the difference grows much slower, for example, linearly on average.
    Matched MeSH terms: Physics/methods*
  11. Ali NA, Sazelee N, Yahya MS, Ismail M
    Front Chem, 2020;8:457.
    PMID: 32656179 DOI: 10.3389/fchem.2020.00457
    In this study, the modification of the desorption behavior of LiAlH4 by the addition of K2NbF7 was explored for the first time. The addition of K2NbF7 causes a notable improvement in the desorption behavior of LiAlH4. Upon the addition of 10 wt.% of K2NbF7, the desorption temperature of LiAlH4 was significantly lowered. The desorption temperature of the LiAlH4 + 10 wt.% K2NbF7 sample was lowered to 90°C (first-stage reaction) and 149°C (second-stage reaction). Enhancement of the desorption kinetics performance with the LiAlH4 + 10 wt.% K2NbF7 sample was substantiated, with the composite sample being able to desorb hydrogen 30 times faster than did pure LiAlH4. Furthermore, with the presence of 10 wt.% K2NbF7, the calculated activation energy values for the first two desorption stages were significantly reduced to 80 and 86 kJ/mol; 24 and 26 kJ/mol lower than the as-milled LiAlH4. After analysis of the X-ray diffraction result, it is believed that the in situ formation of NbF4, LiF, and K or K-containing phases that appeared during the heating process promoted the amelioration of the desorption behavior of LiAlH4 with the addition of K2NbF7.
    Matched MeSH terms: Physics
  12. Ee, S.C., Bakar, J., Kharidah, M., Dzulkifly, M.H., Noranizan, A.
    MyJurnal
    The physico-chemical properties of spray-dried pitaya peel powders kept at accelerated (45 ± 2°C) and room temperature (28 ± 2°C) for 14 weeks and 6 months, respectively were evaluated. Changes in physico-chemical properties of the peel powder were used as indicators of stability, while changes of the betacyanin pigment retention was used to calculate the shelf-life of the powder. Storage temperatures significantly (p < 0.05) affected all the studied parameters and Hunter a value had the most significant change. The pigment retention of peel powder was approximately 87% at 45°C and 89% at room temperature storage. Degradation of betacyanin pigment in the powder followed the first order reaction kinetics with the half-life (t1/2) of approximately 76 weeks at 45°C and 38 months at 28°C. The spray-dried pitaya peel powder had a solubility of 87 to 92% and low in powder hygroscopicity. The final Aw of the powder did not exceed 0.6 for both storage temperatures.
    Matched MeSH terms: Physics
  13. Ivan Kok Seng Yap, Ammu Kutty Radhakrishnan, Chee Onn Leong
    MyJurnal
    Cancer research is an extremely broad topic covering many scientific disciplines including biology (e.g. biochemistry and signal transduction), chemistry (e.g. drug discover and development), physics (e.g. diagnostic devices) and even computer science (e.g. bioinformatics). Some would argue that
    cancer research will continue in much the same way as it is by adding further layers of complexity to the scientific knowledge that is already complex and almost beyond measure. But we anticipate that cancer research will undergo a dramatic paradigm shift due to the recent explosion of new discoveries in cancer biology. This review article focuses on the latest horizons in cancer research concerning cancer epigenetics, cancer stem cells, cancer immunology and cancer metabolism.
    Matched MeSH terms: Physics
  14. Nurain Azmi, Sabirin Mustafa, Nur Hazirah Mohd Yunos, Wan Nor Azlin Wan Mohd Sakri, Muhammad Nazzim Abdul Halim, Amin Aadenan
    MyJurnal
    In this paper, a simple analysis yet a straight forward method of determining the Planck’s constant by
    evaluating the stopping potential of five different colors of light emitting diodes (LEDs) is presented.
    The study aimed to identify the Planck’s constant based on the relationship between the potential
    difference of LEDs to their respective frequencies under room temperature with low illumination of
    ambient light by applying a simple theoretical analysis. The experiment was performed by connecting
    the circuit in series connection and the voltage reading of LEDs were recorded and then presented in a
    graph of frequency, f versus stopping voltage, Vo. To determine the Planck’s constant, the best fit line
    was analyzed and the centroid was also identified in order to find the minimum and maximum errors
    due the gradient of the graph. From the analysis, results showed that the Planck constant value was
    (5.997 ± 1.520) × 10–34 J.s with approximately 10% of deviation from the actual value. This
    demonstrates that a simple analysis can be utilized to determine the Planck’s constant for the purpose
    of the laboratory teaching and learning at the undergraduate level and can be served as a starting point
    for the students to understand the concept of quantization of energy in Modern Physics more
    effectively. This is to further suggest that the Planck’s constant can be identified via a low-cost and
    unsophisticated experimental setup.
    Matched MeSH terms: Physics
  15. Anuar Alias, Ithnin Abdul Jalil, Tajuddin, W.A.
    MyJurnal
    String theory is currently considered as the leading candidate for a unified theory of physics combining the Standard Model of forces and particles with gravity which is best described by Einstein theory of General Relativity. Contrary to classical model of point particle, String theory proposes that matter, force, even space and time are composed of tiny vibrating strings. This paper is to elaborate on the correspondence between string states and quantum fields by initially constructing general time-dependent states from string basis states analogous to general timedependent super-positions of basis states for a point particle. From this derivation we can show that an equation emerges from the 'classical' Schrodinger equation that represents the Schrodinger equation in String theory. This is very interesting to investigate since the Schrodinger equation is at the core of Quantum Mechanics which is the foundation of Standard Model that is the pillar of Nuclear physics.
    Matched MeSH terms: Nuclear Physics; Physics
  16. Razak Mohd Ali Lee, Khairul Anwar Mohamad, Katsuyoshi, Hamasaki
    MyJurnal
    We put attention on Intrinsic Josephson Junction (IJJ) to study the fundamental physic for device applications. Convenient self-flux method was used to grow BSCCO single crystals. We investigated the lid effect to examine the single crystal growth of high TC (Critical Temperature). We found that for the crystal growth with no lid, two stage transitions of TC ≅ 61 K and 77 K were observed. While for the crystal growth with lid, the BSCCO has TC ≅ 80K, ΔTC = 10K and approximately average size5x2mm 2 . When we increased weight of lid, the single crystal have increased to TC =80K, ΔTC = 4K and the typical size was ≅7x3mm 2 . TC and the crystal growth show a tendency to increase by the effect of the lid. From observed quasi-particle characteristics, c-axis direction changed from semiconductor to intrinsic Josephson characteristic with decreasing temperature.
    Matched MeSH terms: Physics
  17. Ong, Jian Fuh, Ithnin Abdul Jalil
    MyJurnal
    Neutrino is one of the nuclear particles that are necessary for the correct description of nuclear beta decay. The standard idea is that it is a massless neutral particle and its existence was postulated in order to save the conservation of ener gy principle. This particle was later detected experimentally and it is now known that neutrino has mass. The problem of astrophysical neutrino detection has produced a new phenomenon of neutrino oscillation where the three neutrino flav ours can oscillate between themselves. This paper studies the two component neutrino oscillation problem. We study the neutrino oscillation by using the Lagrangian formulation. In our study, we assume that the neutrinos are produced as n eutrino mass eigenstate and propagate in the vacuum in the superposition of two neutrino flavour state. The Lagrangian for neutrinos with their mass and the oscillation terms were obtained. By using the mass matrix in the Lagrangian, we formulate the time evolution operator in the interaction picture. The neutrino oscillation probability obtained by using the Lagrangian formulation have the same result with the one obtained by using quantum mechanics formulation. This study hopes to gain some deeper understanding into the behaviour of neutrino beyond the Standard Model.
    Matched MeSH terms: Physics
  18. Andrea, B.K., Safinaz, M.K., Umi Kalthum, M.N., Mushawiahti, M.
    MyJurnal
    Traumatic injury to the eye can occur due to various causes, most of which are avoidable. Here we report three cases of intrastromal corneal foreign bodies (FB) which required surgical removal. Most corneal FBs are removed easily at the slit lamp, however, these cases required surgical intervention due to the mechanism of which the FB penetrated into the stroma. Although the mechanism of injury was similar, with all three cases occurring at high velocity, we observed that the entry and level of penetration differed in each case. In the first case, the corneal FB penetrated the cornea and was embedded in the anterior stroma, whereas in the second case, the FB was embedded in the posterior stroma, but with an intact endothelium. In the third case, the FB caused a full thickness, self-sealed laceration wound but remained embedded in the stroma. Through further evaluation, we noted that several factors contribute towards the severity of the injury, namely, anatomy of the cornea, area affected, shape, size, mass and velocity of the object. We speak in depth about the mechanism of injury and physics associated with these injuries and why the penetration differed in each case.
    Matched MeSH terms: Physics
  19. Woo MK, Ng KH
    J Med Internet Res, 2003 Jan-Mar;5(1):e3.
    PMID: 12746208
    Medical physics is a relatively small community but it spans great geographical distances, usually with a scarcity of experts whose expertise could greatly benefit students entering into the field. In addition there are many software systems for which an interactive education method would be most advantageous.
    Matched MeSH terms: Nuclear Physics/education*; Nuclear Physics/methods
  20. Nur Jannah Azman, Wan Mohd Rizlan Wan Idris, Alice Shanthi
    Jurnal Inovasi Malaysia, 2019;2(2):111-122.
    MyJurnal
    Circular 10/2016 issued by UiTM Vice-Chancellor’s office comprises a clear guideline for 2017 Strategic Budget Planning. The guidelines can help the Head of PTJ’s to plan and take necessary cost effective measures to reduce on utility expenditure especially to counter the rising monthly electricity bills related to the use of air conditioners on campuses. Looking at the figures drawn from the energy management office in UiTM Negeri Sembilan Branch, UiTM Kuala Pilah campus has spent an average of RM153, 028.88 monthly in 2016. As of August 2016, the cost of electricity consumption in UiTM Kuala Pilah has reached RM1,224,231.03. This amount has surpassed the overall approved allocation of RM 800,000.00 for 2016 electricity bill. In order to reduce spending and encourage saving, as well as responding to the ‘Energy Savings Campaign’ held at the campus level, various efforts have been taken at the departmental levels. One of the innovative products that came about from the campaign is the ‘Smartfan’ project pioneered by the Physics and Materials Science Unit. The main objective of this project is the production of a “smartfan” or a mini air conditioner which is a simple, cost-effective and an energy saving device. In addition, products and ideas from the campaign can be piloted and taken to innovative, inventions and design contests at national and international levels.
    Matched MeSH terms: Physics
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links