MyMedR

Displaying publications 1 - 20 of 161 in total

Abstract:

Sort:

Single-nucleotide polymorphism markers within MVA and MEP pathways among Hevea brasiliensis clones through transcriptomic analysis

Abdul Rahman SN, Bakar MFA, Singham GV, Othman AS

3 Biotech, 2019 Nov;9(11):388.
PMID: 31656726 DOI: 10.1007/s13205-019-1921-3

In this study, RNA sequencing of several Hevea brasiliensis clones grown in Malaysia with different annual rubber production yields and disease resistance was performed on the Illumina platform. A total of 29,862,548 reads were generated, resulting in 101,269 assembled transcripts that were used as the reference transcripts. A similarity search against the non-redundant (nr) protein databases presented 83,771 (83%) positive BLASTx hits. The transcriptome was annotated using gene ontology (GO), the Kyoto Encyclopedia of Genes and Genomes (KEGG) and the Pfam database. A search for putative molecular markers was performed to identify single-nucleotide polymorphisms (SNPs). Overall, 3,210,629 SNPs were detected and a total of 1314 SNPs associated with the genes involved in MVA and MEP pathways were identified. A total of 176 SNP primer pairs were designed from sequences that were related to the MVA and MEP pathways. The transcriptome of RRIM 3001 and RRIM 712 were subjected to pairwise comparison and the results revealed that there were 1262 significantly differentially expressed genes unique to RRIM 3001, 1499 significantly differentially expressed genes unique to RRIM 712 and several genes related to the MVA and MEP pathways such as AACT, HMGS, PMK, MVD, DXS and HDS were included. The results will facilitate the characterization of H. brasiliensis transcriptomes and the development of a new set of molecular markers in the form of SNPs from transcriptome assembly for the genotype identification of various rubber varieties with superior traits in Malaysia.

Matched MeSH terms: Rubber
Fulltext Biodegradable Gloves for Waste Management Post-COVID-19 Outbreak: A Shelf-Life Prediction

Ab Rahman MF, Rusli A, Misman MA, Rashid AA

ACS Omega, 2020 Nov 24;5(46):30329-30335.
PMID: 33251468 DOI: 10.1021/acsomega.0c04964

With increased awareness on the importance of gloves arising from the COVID-19 pandemic, people are expected to continue using them even after the pandemic recedes. This scenario in a way increased the rubber solid waste disposal problem; therefore, the production of biodegradable gloves may be an option to overcome this problem. However, the need to study the shelf life of biodegradable gloves is crucial before commercialization. There are well-established models to address the failure properties of gloves as stated in the American Society for Testing and Material (ASTM) D7160. In this study, polysaccharide-based material-filled natural rubber latex (PFNRL) gloves, which are biodegradable gloves, were subjected to an accelerated aging process at different temperatures of 50-80 °C for 1-120 days. Prediction models based on Arrhenius and shift factors were used to estimate the shelf life of the PFNRL gloves. Based on the results obtained, the estimated time for the PFNRL gloves to retain 75% of their tensile strength at shelf temperature (30 °C) based on Arrhenius and shift factor models was 2.8 years. Verification on the activation energy based on the shift factor model indicated that the shelf life of PFNRL gloves is 2.9 years, which is only a 3.6% difference. The value obtained is aligned with the requirement in accordance with ASTM D7160, which states that only up to a maximum of 3 years' shelf life is allowed for the gloves under accelerated aging conditions.

Matched MeSH terms: Rubber
Fulltext Chitosan Epoxidized Natural Rubber Biocomposites for Sorption and Biodegradability Studies

Raju G, Mas Haris MRH, Azura AR, Ahmed Mohamed Eid AM

ACS Omega, 2020 Nov 10;5(44):28760-28766.
PMID: 33195929 DOI: 10.1021/acsomega.0c04081

The slow-release mechanism of copper into soil followed by soil biodegradation was studied using the chitosan (CTS)/epoxidized natural rubber (ENR) biocomposite. The biocomposite was prepared by homogenizing CTS in ENR50 (ENR with about 50% epoxy content) latex in the presence of curing agents and acetic acid. It was found that the adsorption property of the biocomposite was very much influenced by chitosan loading, where 20phrCTS-t-ENR biocomposite can absorb 76.31% of Cu(II) ions. The desorption study indicates that the copper (II) ion can be released at a very slow and control phase as proven by the kinetic study using zero-order, first-order, Higuchi, and Korsmeyer Peppas equations. The slow-release studies comply with the Higuchi square-root equation, indicating that the release process is diffusion-controlled. Results of desorption and biodegradation process suggest that this biocomposite has the potential use of being a slow-release matrix in the field of agriculture.

Matched MeSH terms: Rubber
Fulltext Effect of high silica loading on uncured properties of epoxidised natural rubber compounds

Mazlina, M.K., Che Su, M.S.

ASM Science Journal, 2012;6(1):31-37.
MyJurnal

A 'green tyre' concept has the advantage of low rolling resistance, improved wet grip and enhanced handling. It has been reported that 3% decrease in rolling resistance is equivalent to 1% fuel saving, thus giving the 'green tyre' economic benefits and customer satisfaction. In this study, epoxidised natural rubber (ENR) compounds containing various loading of silica filler were prepared. The processibility and viscoelastic properties were investigated using the rubber processing analyser and Mooney viscometer. Results showed that the properties were adversely affected by the poor dispersion of silica as supported by the bound rubber measurement. In addition, a reversion in the cure behaviour was also observed as the curing temperature was increased to 170ºC.

Matched MeSH terms: Rubber
Fulltext Sludge-derived fuel from latex products manufacturing industry

Devaraj, V., Zairossani, M.N.

ASM Science Journal, 2012;6(1):15-21.
MyJurnal

Malaysia is the world’s top manufacturer of examination and surgical natural rubber (NR) gloves, exported mainly to the USA and Europe. The glove manufacturing process yields effluent which must be treated to comply with the stringent regulatory requirements imposed by the Malaysian Department of Environment. To make glove manufacturing an eco-friendly process, efforts are geared towards minimizing and utilizing waste or converting it into raw material for making value-added products. Waste generated from the glove industry is mainly rubber sludge which is obtained from the chemical flocculation stage of the effluent treatment process and consists of mainly rubber, remnants of compounding ingredients and water. R&D work by the Malaysian Rubber Board on waste utilization and resource recovery investigations have revealed many uses for this sludge. This paper briefly outlines only one of the many options available, which is the conversion of the sludge into sludge derived fuel (SDF). Preliminary study has identified three formulations of SDF with calorific values (CV) exceeding 16 000 kJ/kg, matching a good grade coal. This was considered as promising results which warrant explorative work for further increasing the CV of SDF to turn it into a viable fuel substitute in the latex products manufacturing industry and subsequently apply for a Clean Development Mechanism status to generate income.

Matched MeSH terms: Rubber
Fulltext Variation in wood density and shrinkage in two latex timber clones of rubber trees in different planting densities

Naji, H.R., Sahri, M.H., Bakar, E.S., Soltani, M., Hamid, H.A.

ASM Science Journal, 2014;8(1):36-43.
MyJurnal

Wood density and types of shrinkage were examined in two rubberwood latex timber clones of rubber (Hevea brasiliensis) namely RRIM 2020 and RRIM 2025, planted at densities of 500, 1000, 1500, and 2000 trees/ha, within a trial plot. The mean wood density showed a low descending trend towards high planting densities in both clones. Wood density was significantly and negatively correlated with planting density. The strength of correlation was moderate. The mean longitudinal shrinkage in both clones and tangential shrinkages in clone RRIM 2020 showed no significant difference among planting densities. The tangential (in RRIM 2025), radial and volumetric shrinkages in both clones decreased from low to high planting densities and the differences were more pronounced between densities of 500 trees/ha and 2000 trees/ha. The magnitudes of correlation between these shrinkages and planting density were low. The regression models indicated that wood density could be more ascribed by planting density followed by volumetric shrinkage. This study exhibited low variations in wood density and shrinkages among clones and the respective planting densities; however, RRIM 2025 was more stable than RRIM 2020.

Matched MeSH terms: Rubber
Fulltext Tensile properties of pre-vulcanised natural rubber latex films via hybrid radiation and peroxide vulcanisations

Sofian Ibrahim, Keong, Chai Chee, Ratnam, Chantara Thevy, Khairiah Badri

ASM Science Journal, 2018;11(2):67-75.
MyJurnal

Radiation pre-vulcanised natural rubber latex (RVNRL) prepared by using gamma irradiation technique has many advantages over the conventionally prepared sulphur pre-vulcanised natural rubber latex (SPVL). Despite the fact that many potential latex dipped products can be made from RVNRL, little effort was made to fully commercialise the products because of the inferior strength of RVNRL products compared to SPVL products. An attempt was made to improve the tensile strength of RVNRL by combining both radiation and peroxide vulcanisation in order to ensure that the products will not tear or fail, and has sufficient stretch. Hexanediol diacrylate (HDDA) plays the main role as sensitizer during radiation vulcanisation and tert-butyl hydroperoxide (t-BHPO) as the co-sensitizer in peroxide vulcanisation. Pre-vulcanised natural rubber latex dipped films via hybrid radiation and peroxidation vulcanisations obtained showed tensile strength of 26.7 MPa, an increment of more than 15% compared to controlled film (22.5 MPa). Besides, the crosslink percentage of the rubber films also showed around 5% increment from 90.7% to 95.6%.

Matched MeSH terms: Rubber
Latex allergy diagnosis: in vivo and in vitro standardization of a natural rubber latex extract

Turjanmaa K, Palosuo T, Alenius H, Leynadier F, Autegarden JE, André C, et al.

Allergy, 1997 Jan;52(1):41-50.
PMID: 9062628

For the diagnosis of IgE-mediated (immediate) hypersensitivity to natural rubber latex (NRL), skin prick testing with extracts of latex gloves has been widely used, but such extracts are difficult to standardize. The present study aimed to produce on an industrial scale an NRL extract from freshly collected NRL and to evaluate, calibrate, and standardize the extract by both in vivo and in vitro testing. The source material, latex of the rubber tree, Hevea brasiliensis (clone RRIM 600), was frozen immediately after collection in Malaysia and shipped in dry ice to Stallergènes SA, France. Protein and allergen profiles were analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), immunoblotting, isoelectric focusing (IEF), crossed immunoelectrophoresis (CIE), and crossed radioimmunoelectrophoresis (CRIE). Allergen quantification was effected by RAST inhibition. The capacity of the preparation to elicit immediate hypersensitivity reactions in vivo was measured by skin prick testing in 46 latex-allergic patients and 76 nonallergic control subjects. SDS-PAGE and immunoblot profiles of the extract and an NRL standard (E8) provided by the US Food and Drug Administration were almost identical, disclosing several distinct IgE-binding proteins with apparent molecular weights of 14, 20, 27, 30, and 45 kDa, conforming to reported molecular weights of several significant NRL allergens. An arbitrary index of reactivity (IR) of 100 was assigned to the extract at 1:200 dilution (w/v), having a protein content of 22 micrograms/ml. Skin prick testing of latex-allergic patients and controls using the extract at 100 IR revealed 93% sensitivity, 100% specificity, 100% negative predictive value, and 96% positive predictive value. In conclusion, a skin prick test reagent for diagnosis of type I NRL allergy was successfully standardized. The reagent was demonstrated to contain most, if not all, of the currently known clinically significant NRL allergens, and it showed high sensitivity and specificity.

Matched MeSH terms: Rubber/administration & dosage; Rubber/analysis; Rubber/standards*
Precipitation of Hevea brasiliensis latex proteins with trichloroacetic acid and phosphotungstic acid in preparation for the Lowry protein assay

Yeang HY, Yusof F, Abdullah L

Anal Biochem, 1995 Mar 20;226(1):35-43.
PMID: 7785777

Many proteins derived from the latex of Hevea brasiliensis that remain soluble in trichloroacetic acid (TCA) can be precipitated by phosphotungstic acid (PTA). A combination of 5% TCA and 0.2% PTA precipitates a wide range of proteins effectively even when they are present in low concentrations (below 1 microgram ml-1). In addition to its protein purification function, acid precipitation also increases the sensitivity of the subsequent protein assay by allowing the test sample to be concentrated. Another advantage of protein precipitation by TCA and PTA is that very small amounts of protein (of the order of 10 micrograms) can be repeatably recovered without the use of precipitate-bulking agents such as sodium deoxycholate. This general procedure of protein purification and concentration is simple and rapid, but the use of PTA may not be fully compatible with the Bradford protein assay. A modified Lowry microassay is described which enables about 3 micrograms ml-1 to be quantitated at the photometric absorbance of 0.05. When used in conjunction with protein concentration by precipitating with TCA/PTA, approximately 0.4 microgram ml-1 protein present in 6 ml of solution can be assayed.

Matched MeSH terms: Rubber/analysis
Fulltext Iatrogenic Mucosal Burn : A Case Report

Musa, S., Awang, H.

Ann Dent, 1996;3(1):-.
MyJurnal

A case of mucosal burn during the placement of fissure sealant on the first permanent molars of a 9-year-old Malay boy is presented. The erythematous lesion with accompanying burning sensation appeared a few minutes after the etching liquid, containing 37% by weight phosphoric acid, had accidentally come into contact with the buccal mucosa on the right side of the angle of the mouth. The mucosa showed complete healing after one week. The use of rubber dam for tooth isolation while doing fissure sealant is essential to avoid accidental contact of potentially caustic chemicals, such as the phosphoric acid etchant, with the oral mucosa as it can result in mucosal burns.

Matched MeSH terms: Rubber Dams
Fulltext A practical model for endodontic radiography teaching

Che Ab Aziz, Z.A.

Ann Dent, 2008;15(2):67-70.
MyJurnal

Aim: To manufacture a clinical simulation apparatus for the undergraduates' endodontic radiography teaching Objectives: • To provide a model for teaching of parallax method using Kelly's forcep • To provide a model for undergraduates to practice radiographic localization employing parallax method. • To allow students to practice taking radiographs in a way that simulates the clinical situations with a good diagnostic quality Methods: Impressions of a dentate arch (maxillary and mandibullary) were used to form a stone cast. A section of the cast, in the area where the natural teeth were to be placed, is sectioned and removed. Three maxillary extracted teeth (canine, first and second premolar) were selected and mounted with acrylic resin at the sectioned area. The resin was cured in a light box. The arches were mounted in a phantom head with a placement of rubber cheek. The first premolar was isolated with rubber dam. The intraoral holder (Kelly's forcep) was attached to a robotic arm. The students were taught the correct angulations of the x-ray cone for the paralleling technique and parallax method using Kelly's forcep during root canal treatment. Results: All students managed to complete the exercise and were considered competent when they produced acceptable quality of radiographs. Conclusion: The model described was improvised from a model that has been used during the past 2 years for undergraduates' endodontic courses. It has been well accepted as it simulates the clinical situation more closely than was possible previously.

Matched MeSH terms: Rubber; Rubber Dams
Fulltext General dental practitioners' confidence in performing molar root canal treatment

Abdullah, M., Che Ab Aziz, Z.A., Roslan Saub, Murat, N., Sulaiman, E., Hashim, N., et al.

Ann Dent, 2009;16(1):9-14.
MyJurnal

The objectives of this study were to assess the practice of molar root canal treatment (RCT) among general dental practitioners (GDPs), confidence level of GDPs in performing molar RCT and to identify factors that influence their confidence in managing molar RCI. One hundred questionnaires were distributed to GDPs in Kuala Lumpur and Selangor. Fifty questionnaires were delivered by mail and the remaining fifty were hand-delivered. All data was coded and verified. Fiftysix OOPs rcsponded to the questionnaires. Only fortyfive questionnaires were accepted (n=45) as eleven OOPs had never performed molar RCI. Most of the OOPs followed the standard quality guidelines while performing molar RCT except for vitality testing (36.4%) and rubber dam usage (27.3%). In this study, 100% of the GDPs were confident in making diagnosis of perinidicular diseases and 95.4% were confident in performing molar RCT from history taking until obturation. Patients' tolerance and availability of instruments and materials (97.7%) were two factors that most influence the GDPs' confidence level. The. least influcncing factor was undergraduate training (78.1 %). Attending seminars and lectures on endodontic, large number of molar teeth treated for ReT, patLents' affordability to pay for RCT and postgraduate training also influencc GDPs' confidence to a certain degree. From this study, it can be concluded that majority of OOPs complied standard quality guidelines except for vitality testing and rubber dam usage. Most of them were confident in performing molar RCT and were greatly influenced by the availability or"instruments and materials in their clinic and patients' tolerance in receiving molar RCI.

Matched MeSH terms: Rubber Dams
Fulltext General dental practitioners' knowledge and practice on root canal treatment

Che Ab Aziz, Z.A., Abdullah, M., Vello, C.D.S., Thangavelu, K.

Ann Dent, 2006;13(1):12-17.
MyJurnal

Background: Majority of root canal treatment in Malaysia was provided by general dental practitioner. The purpose of this study was to evaluate the knowledge and practice (canal’s preparation, use of materials) by them. Methods: A questionnaire was structured and distributed to 120 registered general dental practitioners in selected areas in Perak, Johor and Klang Valley regarding the provision of root canal therapy in their practices. The questionnaires were hand delivered and collected after 1 to 2 weeks. Results: Reply rate was 95% (n=114). The result demonstrated that 62% respondents indicated that they performed the root canal therapy (RCT) themselves. Out of these only 26% included molars in the treatment. Three quarters of them (77%) used step-back technique and 54% used stainless steel instruments to prepare the canals. The majority of the respondents (69%) used calcium hydroxide as intracanal medicaments. Only 30% used rubber dam for isolation whereas the rest used cotton rolls. The numbers of routine radiographs taken were two for anterior teeth and three for molar. Half of the respondents indicated that they usually completed the RCT for the anterior tooth within two visits whereas three visits were needed for the molar tooth. The results were analyzed descriptively. Conclusions: This study indicates that most of the general dental practitioners’ do not comply with quality standards guidelines such as use of rubber dam as isolation. Cotton roll was the most popular isolation method. In spite of this, most of the respondents tend to update their knowledge and practices with current techniques and materials.

Matched MeSH terms: Rubber Dams
Unlocking the Secret of Bio-additive Components in Rubber Compounding in Processing Quality Nitrile Glove

Yew GY, Tham TC, Show PL, Ho YC, Ong SK, Law CL, et al.

Appl Biochem Biotechnol, 2020 May;191(1):1-28.
PMID: 32006247 DOI: 10.1007/s12010-019-03207-7

The sustainability of nitrile glove production process is essential both in the financial and energy perspective. Nitrile glove has the lowest material cost with positive mechanical and chemical performance quality for the disposable glove market. Nitrile glove also holds a major market in disposable gloves sector, and nitrile rubber compounds may contribute to the huge reduction of the capital cost for a pair of surgical gloves due to the inexpensive raw material compares with other synthetic polyisoprene or neoprene. Hence, blending of bio-additive into the nitrile latex might support the 3 pillars of sustainability for environmental, societal, and financial sector. Bio-additives helps increase the degradation rate of gloves under natural conditions. Bio-based substances could be derived from food waste, natural plants, and aquatic plants like micro- and macro algae. Furthermore, antimicrobial agent (e.g. brilliant green and cyclohexadiene) is the trend in surgical glove for coated as protecting layer, due to the capability to remove pathogens or bacterial on the surgeon hands during operation period. Besides, the section in energy recovery is a proposing gateway for reducing the financial cost and makes the process sustainable.

Matched MeSH terms: Rubber/chemistry*
Effects of Running Surface Stiffness on Three-Segment Foot Kinematics Responses with Different Shod Conditions

Abdul Yamin NAA, Basaruddin KS, Salleh AF, Salim MS, Wan Muhamad WZA

Appl Bionics Biomech, 2021;2021:8842591.
PMID: 33603827 DOI: 10.1155/2021/8842591

Objective: The aim of this study was to investigate the effects of surface stiffness on multisegment foot kinematics and temporal parameters during running.
Methods: Eighteen male subjects ran on three different surfaces (i.e., concrete, artificial grass, and rubber) in both heeled running shoes (HS) and minimal running shoes (MS). Both these shoes had dissimilar sole profiles. The heeled shoes had a higher sole at the heel, a thick base, and arch support, whereas the minimal shoes had a flat base sole. Indeed, the studied biomechanical parameters responded differently in the different footwear during running. Subjects ran in recreational mode speed while 3D foot kinematics (i.e., joint rotation and peak medial longitudinal arch (MLA) angle) were determined using a motion capture system (Qualysis, Gothenburg, Sweden). Information on stance time and plantar fascia strain (PFS) was also collected.
Results: Running on different surface stiffness was found to significantly affect the peak MLA angles and stance times for both HS and MS conditions. However, the results showed that the joint rotation angles were not sensitive to surface stiffness. Also, PFS showed no relationship with surface stiffness, as the results were varied as the surface stiffness was changed.
Conclusion: The surface stiffness significantly contributed towards the effects of peak MLA angle and stance time. These findings may enhance the understanding of biomechanical responses on various running surfaces stiffness in different shoe conditions.

Matched MeSH terms: Rubber
Non-thermal plasma for air and water remediation

Hashim SA, Samsudin FN, Wong CS, Abu Bakar K, Yap SL, Mohd Zin MF

Arch Biochem Biophys, 2016 09 01;605:34-40.
PMID: 27056469 DOI: 10.1016/j.abb.2016.03.032

A modular typed dielectric barrier discharge (DBD) device is designed and tested for air and water remediation. The module is made of a number of DBD tubes that can be arranged in series or parallel. Each of the DBD tubes comprises inner electrode enclosed with dielectric barrier and arranged as such to provide a gap for the passage of gases. Non-thermal plasma generated in the gap effectively creates gaseous chemical reactions. Its efficacy in the remediation of gas stream containing high NOx, similar to diesel emission and wastewater containing latex, are presented. A six tubes DBD module has successfully removed more than 80% of nitric oxide from the gas stream. In another arrangement, oxygen was fed into a two tubes DBD to generate ozone for treatment of wastewater. Samples of wastewater were collected from a treatment pond of a rubber vulcanization pilot plant. The water pollution load was evaluated by the chemical oxygen demand (COD) and biological oxygen demand (BOD5) values. Preliminary results showed some improvement (about 13%) on the COD after treatment and at the same time had increased the BOD5 by 42%. This results in higher BOD5/COD ratio after ozonation which indicate better biodegradability of the wastewater.

Matched MeSH terms: Rubber
Low-Cost Self-Made Arthroscopic Training Camera Is Equally as Effective as Commercial Camera: A Comparison Study

Ling JL, Teo SH, Mohamed Al-Fayyadh MZ, Mohamed Ali MR, Ng WM

Arthroscopy, 2019 02;35(2):596-604.
PMID: 30611592 DOI: 10.1016/j.arthro.2018.08.038

PURPOSE: To assess the effectiveness of a low-cost self-made arthroscopic camera (LAC) in basic arthroscopic skills training compared with a commercial arthroscopic camera (CAC).
METHODS: One hundred fifty-three orthopaedic residents were recruited and randomly assigned to either the LAC or CAC. They were allocated 2 practice sessions, with 20 minutes each, to practice 4 given arthroscopic tasks: task 1, transferring objects; task 2, stacking objects; task 3, probing numbers; and task 4, stretching rubber bands. The time taken for participants to complete the given tasks was recorded in 3 separate tests; before practice, immediately after practice, and after a period of 3 months. A comparison of the time taken between both groups to complete the given tasks in each test was measured as the primary outcome.
RESULTS: Significant improvements in time completion were seen in the post-practice test for both groups in all given arthroscopic tasks, each with P < .001. However, there was no significant difference between the groups for task 1 (P = .743), task 2 (P = .940), task 3 (P = .932), task 4 (P = .929), and total (P = .944). The outcomes of the tests (before practice, after practice, and at 3 months) according to repeated measures analysis of variance did not differ significantly between the groups in task 1 (P = .475), task 2 (P = .558), task 3 (P = .850), task 4 (P = .965), and total (P = .865).
CONCLUSIONS: The LAC is equally as effective as the CAC in basic arthroscopic skills training with the advantage of being cost-effective.
CLINICAL RELEVANCE: In view of the scarcity in commercial arthroscopic devices for trainees, this low-cost device, which trainees can personally own and use, may provide a less expensive and easily available way for trainees to improve their arthroscopic skills. This might also cultivate more interest in arthroscopic surgery among junior surgeons.

Matched MeSH terms: Rubber
Nutritional assessment of rural villages and estates in peninsular Malaysia: Total blood cholesterol values in children, adolescents and adults

Wai TN, Lin KG, Siong TE, Hashim N

Asia Pac J Clin Nutr, 2000 Jun;9(2):115-21.
PMID: 24394397

The present study is unique in the Malaysian context on two counts; first, it employs for the first time a functional group approach (groups based on occupational or economic activity) in the assessment of community nutritional status. Second, the study provides on a nationwide-sampling basis, information on total blood cholesterol (TC) levels in rural children (7.0-12.9 years; n = 1921) and adolescents (13.0-17.9 years; n = 753) which were hitherto unavailable. Total blood cholesterol measurements were performed on 7184 subjects ranging from 7 to 75-years-old (males = 3151; females = 4033) from households in 69 rural villages and seven estates in peninsular Malaysia, which were based on selected multistage random sampling according to the household's involvement in the following economic activities: rice farming, rubber smallholding, coconut smallholding, fishing and employment in estates. In all functional groups, TC values increased with age and there was a distinct gender effect, namely females had higher TC values than males throughout the age spectrum analyzed. Mean TC levels for children and adolescents were in the range 3.85-4.37 mmol/L, rising markedly during adulthood to an overall mean of 4.91 ± 1.13 mmol/L for men and 5.17 ± 1.11 mmol/L for women. In adults (>= 18.0 years), there was marked disparity in mean TC values among the functional groups; males and females from rice households had the lowest mean TC values (4.58 and 4.99 mmol/L, respectively). Individuals at 'high risk' (TC > 6.20 mmol/L) averaged 16.0% in women and 11.6% in men, with women from the fishing, rubber and coconut households particularly affected (17.1-21.1%). When compared to earlier rural TC data reported for closely similar rural communities in the peninsula, the present findings suggest a 'hypercholesterolemic shift' approximating 0.39 mmol/L (15 mg/dL) in the adult population; however, this was not apparent in the children and adolescents from these rural communities.

Matched MeSH terms: Rubber
Socioeconomic profile and nutritional status of children in rubber smallholdings

Marjan ZM, Kandiah M, Lin KG, Siong TE

Asia Pac J Clin Nutr, 2002;11(2):133-41.
PMID: 12074180

This paper will present the socioeconomic profile and nutritional status of children aged 1-6 years in the rubber smallholdings of Peninsula Malaysia. A total of 323 households were involved in this study. The sociodemographic data were obtained through interviews with heads of households using a set of questionnaires. Anthropometric measurements were taken from 506 children aged 1-6 years from these households. The weight and height of the children were compared with the reference values of the National Center for Health Statistics (NCHS) and the nutritional status was classified based on the recommendations of WHO. The average age of the fathers was 39.9+/-8.6 years and 34.4+/-7.0 years for the mothers. The mean household size was 6.67+/-2.27. The majority (49.7%) of the heads of households received 4-6 years of formal education and 7.9% received no formal education. Based on the monthly per capita income, 24.0% were found to be in the hardcore poor category, 38.3% fall into the poor category and 37.7% in the above poverty income group. The prevalence of stunting and underweight among children between the ages of 1-6 years were highest among children from the hardcore poor, followed by the poor category and above the poverty line income group. Wasting was present in all income groups, with a prevalence of 4.2% found among the hardcore poor, 9.4% among the poor group and 8.4% in the above poverty income group. The Pearson Product Moment Correlation showed significant relationships between household total income and height-for-age (r = 0.131, P = 0.05) and weight-for-age (r = 0.127, P = 0.05). There were also significant correlations between monthly per capita income with height-for-age (r = 0.16, P < 0.01) and weight-for-age (r = 0.13, P < 0.05). The acreage of land utilised was correlated with height-for-age (r = 0.11, P < 0.05), weight-for-age (r = 0.17, P < 0.05) and weight-for-height (r = 0.16, P < 0.05). However, stepwise multiple regression analysis indicated that the predictor of height-for-age was monthly per capita income (R2 = 0.03, P < 0.01) and acreage of land utilised was a predictor for weight-for-age (R2 = 0.03, P < 0.01) and weight-for-height (R2 = 0.01, P < 0.01). Because income and acreage of land utilised have been shown to be associated with nutritional status, it is recommended that intervention programs that focus on generation of income and diversification of land utilisation should be undertaken. A multidiscipline approach involving the family, community and government agencies should be applied to any type of intervention program.

Matched MeSH terms: Rubber/economics*
Fulltext Prevalence of overweight among Malaysian adults from rural communities

Khor GL, Yusof AM, Tee ES, Kandiah M, Lee Huang MS

Asia Pac J Clin Nutr, 1999 Dec;8(4):272-9.
PMID: 24394228

Assessment of the nutritional status of 4054 households from rural communities in Peninsular Malaysia was undertaken from 1992 to 1995. Body mass index (BMI) and waist-to-hip ratio (WHR) were obtained from a self-selected sample of 1854 men and 2741 women aged >= 18 years. The BMI and WHR results are presented according to gender, age groups and type of community as defined by the main occupation, namely, fishing, rice farming, estate work, rubber and coconut small-holding. The mean BMI for men and women of all age groups are 22.5 kg/m2 and 23.8 kg/m2, respectively. The mean BMI for both genders increases with age between 18.0 and 49.9 years, after which the value declines. The prevalence of pre-obese (BMI >= 25.0-29.9 kg/m2) is 19.8% for men and 28.0% for women. The prevalence of obese men and women (>= 30.0 kg/m2) is 4.2% and 11.1%, respectively. The highest prevalence of pre-obese and obese men is found in the age groups of 30.0-49.9 years, while that for women is in the 40.0-49.9 years age group. The prevalence of pre-obesity and obesity is higher in women than in men for every age group. A similar result was indicated by WHR whereby a higher proportion of women (22.5%) than men (5%) for all ages was found to show central obesity. The prevalence of overweight adults is higher when compared with previous studies on subjects from almost similar rural communities. This study indicated that overweight is on the increase in rural communities, especially among female subjects.

Matched MeSH terms: Rubber

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links