Displaying publications 1 - 20 of 185 in total

Abstract:
Sort:
  1. Fulltext A Novel Hydrazinecarbothioamide as a Potential Corrosion Inhibitor for Mild Steel in HCl
    Al-Amiery AA, Kadhum AAH, Mohamad AB, Junaedi S
    Materials (Basel), 2013 Apr 02;6(4):1420-1431.
    PMID: 28809218 DOI: 10.3390/ma6041420
    2-(1-methyl-4-((E)-(2-methylbenzylidene)amino)-2-phenyl-1H-pyrazol-3(2H)-ylidene)-hydrazineecarbothioamide (HCB) was synthesized as a corrosion inhibitor from the reaction of 4-aminoantipyrine, thiosemicarbazide and 2-methylbenzaldehyde. The corrosion inhibitory effects of HCB on mild steel in 1.0 M HCl were investigated using potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS). The results showed that HCB inhibited mild steel corrosion in acidic solution and inhibition efficiency increased with an increase in the concentration of the inhibitor. The inhibition efficiency was up to 96.5% at 5.0 mM. Changes in the impedance parameters suggested that HCB adsorbed on the surface of mild steel, leading to the formation of a protective film. The novel corrosion inhibitor synthesized in the present study was characterized using Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) spectral data.
    Matched MeSH terms: Steel
  2. Fulltext A case study on manual handling at an electronic component manufacturing company
    Deros, B.M., Daruis, D.D.I., Ghani, J.A., Saleh, C., Wazir, R.M., Yasim, M.K., et al.
    Malaysian Journal of Public Health Medicine, 2016;16(10):0-0.
    MyJurnal
    This An Ergonomic hazard often exists in any industry. However, majority of the employees are not aware of practicing good body posture until the MSDs symptoms become permanent and chronic. The main objective of this study is to determine the manual handling problems among workers at an electronic component manufacturing company. The scope of this study focused on the study entire body disorders among workers on electronic manufacturing company using the Rapid Entire Body Assessment (REBA). A cross sectional study involving observation of the workplace, the work task and the working environment, photographs and videos taken during the observation. Later, a survey questionnaire was given to the respondents to obtain their socio-demography information, work activity and health problems. Rapid Entire Body Assessment (REBA) was conducted on all respondents to determined REBA scores in different work positions. The study was conducted at an electronic component manufacturing company located in Klang Valley, Selangor. A total of 124 workers were surveyed and REBA assessment was performed on 20 workers at Company X production area. It includes 5 categories of position at Company X, such as:loading steel bar into casing; pushing the steel bar, turning movement while adjusting the steel bar, adjusting steel bar into the loading area, unloading steel bar from casing into the machine. The study found that turning section has the highest MSDs problems regarding manual handling because majority of the respondents in the turning department felt the pain while performing their work. This is due to their job demand, which they need to handle with tools weighing from 200 to 400 kg. The REBA scores showed that17 out of 20 respondents performing turning operations, moving and pushing the steel bar recorded the highest score of 11 or more which are categorize in the very high risk group. The position of pushing and turning steel bar while moving the steel bar has higher risk that contributed to the ergonomics risk factor, which in-turn can contribute to Muscular Skeletal Disorders (MSDs). More detailed investigation and remedial measures should be taken immediately, especially for the workers performing the manual handlings activities.
    Matched MeSH terms: Steel
  3. A comparative evaluation of cleaning efficacy (debris and smear layer removal) of hand and two NiTi rotary instrumentation systems (K3 and ProTaper): a SEM study
    Reddy KB, Dash S, Kallepalli S, Vallikanthan S, Chakrapani N, Kalepu V
    J Contemp Dent Pract, 2013 Nov 1;14(6):1028-35.
    PMID: 24858745
    The present study was conducted to compare the cleaning efficacy (debris and smear layer removal) of hand and two NiTi rotary instrumentation systems (K3 and ProTaper).
    Matched MeSH terms: Stainless Steel/chemistry
  4. A comparative life cycle assessment (LCA) of concrete and steel-prefabricated prefinished volumetric construction structures in Malaysia
    Balasbaneh AT, Ramli MZ
    Environ Sci Pollut Res Int, 2020 Dec;27(34):43186-43201.
    PMID: 32734541 DOI: 10.1007/s11356-020-10141-3
    In recent years, off-site volumetric construction has been promoted as a viable strategy for improving the sustainability of the construction industry. Most prefabricated prefinished volumetric construction (PPVC) structures are composed of either steel or concrete; thus, it is imperative to carry out life cycle assessments (LCAs) for both types of structures. PPVC is a method by which free-standing volumetric modules-complete with finishes for walls, floors, and ceilings-are prefabricated and then transferred and erected on-site. Although many studies have examined these structures, few have combined economic and environmental life cycle analyses, particularly for prefinished volumetric construction buildings. The purpose of this study is to utilize LCA and life cycle cost (LCC) methods to compare the environmental impacts and costs of steel and concrete PPVCs "from cradle to grave." The results show that steel necessitates higher electricity usage than concrete in all environmental categories, while concrete has a higher emission rate. Steel outperforms concrete by approximately 37% in non-renewable energy measures, 38% in respiratory inorganics, 43% in land occupation, and 40% in mineral extraction. Concrete, on the other hand, performs 54% better on average in terms of measures adopted for greenhouse gas (GHG) emissions. Steel incurs a higher cost in the construction stage but is ultimately the more economical choice, costing 4% less than concrete PPVC owing to the recovery, recycling, and reuse of materials. In general, steel PPVC exhibits better performance, both in terms of cost and environmental factors (excluding GHG emissions). This study endeavors to improve the implementation and general understanding of PPVC.
    Matched MeSH terms: Steel
  5. A comprehensive review of milk fouling on heated surfaces
    Sadeghinezhad E, Kazi SN, Dahari M, Safaei MR, Sadri R, Badarudin A
    Crit Rev Food Sci Nutr, 2015;55(12):1724-43.
    PMID: 24731003 DOI: 10.1080/10408398.2012.752343
    Heat exchanger performance degrades rapidly during operation due to formation of deposits on heat transfer surfaces which ultimately reduces service life of the equipment. Due to scaling, product deteriorates which causes lack of proper heating. Chemistry of milk scaling is qualitatively understood and the mathematical models for fouling at low temperatures have been produced but the behavior of systems at ultra high temperature processing has to be studied further to understand in depth. In diversified field, the effect of whey protein fouling along with pressure drop in heat exchangers were conducted by many researchers. Adding additives, treatment of heat exchanger surfaces and changing of heat exchanger configurations are notable areas of investigation in milk fouling. The present review highlighted information about previous work on fouling, influencing parameters of fouling and its mitigation approach and ends up with recommendations for retardation of milk fouling and necessary measures to perform the task.
    Matched MeSH terms: Stainless Steel/chemistry
  6. A contrast stretching bilateral closing top-hat Otsu threshold technique for crack detection in images
    Sim KS, Kho YY, Tso CP, Nia ME, Ting HY
    Scanning, 2013 Mar-Apr;35(2):75-87.
    PMID: 22777599 DOI: 10.1002/sca.21037
    Detection of cracks from stainless steel pipe images is done using contrast stretching technique. The technique is based on an image filter technique through mathematical morphology that can expose the cracks. The cracks are highlighted and noise removal is done efficiently while still retaining the edges. An automated crack detection system with a camera platform has been successfully implemented. We compare crack extraction in terms of quality measures with those of Otsu's threshold technique and the another technique (Iyer and Sinha, 2005). The algorithm shown is able to achieve good results and perform better than these other techniques.
    Matched MeSH terms: Stainless Steel
  7. A facile, bio-based, novel approach for synthesis of covalently functionalized graphene nanoplatelet nano-coolants toward improved thermo-physical and heat transfer properties
    Sadri R, Hosseini M, Kazi SN, Bagheri S, Abdelrazek AH, Ahmadi G, et al.
    J Colloid Interface Sci, 2018 Jan 01;509:140-152.
    PMID: 28898734 DOI: 10.1016/j.jcis.2017.07.052
    In this study, we synthesized covalently functionalized graphene nanoplatelet (GNP) aqueous suspensions that are highly stable and environmentally friendly for use as coolants in heat transfer systems. We evaluated the heat transfer and hydrodynamic properties of these nano-coolants flowing through a horizontal stainless steel tube subjected to a uniform heat flux at its outer surface. The GNPs functionalized with clove buds using the one-pot technique. We characterized the clove-treated GNPs (CGNPs) using X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). We then dispersed the CGNPs in distilled water at three particle concentrations (0.025, 0.075 and 0.1wt%) in order to prepare the CGNP-water nanofluids (nano-coolants). We used ultraviolet-visible (UV-vis) spectroscopy to examine the stability and solubility of the CGNPs in the distilled water. There is significant enhancement in thermo-physical properties of CGNPs nanofluids relative those for distilled water. We validated our experimental set-up by comparing the friction factor and Nusselt number for distilled water obtained from experiments with those determined from empirical correlations, indeed, our experimental set-up is reliable and produces results with reasonable accuracy. We conducted heat transfer experiments for the CGNP-water nano-coolants flowing through the horizontal heated tube in fully developed turbulent condition. Our results are indeed promising since there is a significant enhancement in the Nusselt number and convective heat transfer coefficient for the CGNP-water nanofluids, with only a negligible increase in the friction factor and pumping power. More importantly, we found that there is a significant increase in the performance index, which is a positive indicator that our nanofluids have potential to substitute conventional coolants in heat transfer systems because of their overall thermal performance and energy savings benefits.
    Matched MeSH terms: Stainless Steel
  8. Fulltext A review on strengthening steel beams using FRP under fatigue
    Kamruzzaman M, Jumaat MZ, Sulong NH, Islam AB
    ScientificWorldJournal, 2014;2014:702537.
    PMID: 25243221 DOI: 10.1155/2014/702537
    In recent decades, the application of fibre-reinforced polymer (FRP) composites for strengthening structural elements has become an efficient option to meet the increased cyclic loads or repair due to corrosion or fatigue cracking. Hence, the objective of this study is to explore the existing FRP reinforcing techniques to care for fatigue damaged structural steel elements. This study covers the surface treatment techniques, adhesive curing, and support conditions under cyclic loading including fatigue performance, crack propagation, and failure modes with finite element (FE) simulation of the steel bridge girders and structural elements. FRP strengthening composites delay initial cracking, reduce the crack growth rate, extend the fatigue life, and decrease the stiffness decay with residual deflection. Prestressed carbon fibre-reinforced polymer (CFRP) is the best strengthening option. End anchorage prevents debonding of the CRRP strips at the beam ends by reducing the local interfacial shear and peel stresses. Hybrid-joint, nanoadhesive, and carbon-flex can also be attractive for strengthening systems.
    Matched MeSH terms: Steel/standards*; Steel/chemistry
  9. Fulltext A systematic approach in the gamma spectrometric determination of radionuclides in coolant of puspati triga reactor
    Muhamat Omar, Zalina Laili, Abd Khalik Wood, Julia Abdul Karim, Zarina Masood, Mohd Fazli Zakaria, et al.
    Jurnal Sains Nuklear Malaysia, 2011;23(2):1-11.
    MyJurnal
    A systematic study to assess the concentration of radionuclides in primary coolant and associated water samples from the operation of a TRIGA Mark II reactor has been carried out. The samples were transferred into appropriate counting container and were counted by efficiency-calibrated gamma spectrometer systems for several hours to obtain statistically adequate data for qualitative and quantitative evaluation of the radioactive materials presence. The primary coolant was found to contain various gamma emitting radionuclides including 24Na, 41Ar, 42K, 51Cr, , 54Mn, 56Mn, 60Co, 99mTc, 122Sb, 124Sb and 187W. Most of the detected radionuclides were inferred to be originated from activation products of (n,) nuclear reactions of elements of reactor components such as stainless steel and aluminium alloy used in the reactor system. The study confirms the integrity of the reactor system with no apparent release of any fission products radionuclide into the coolant water system.
    Matched MeSH terms: Stainless Steel
  10. Adhesion of Pseudomonas fluorescens biofilms to glass, stainless steel and cellulose
    Wan Dagang WR, Bowen J, O'Keeffe J, Robbins PT, Zhang Z
    Biotechnol Lett, 2016 May;38(5):787-92.
    PMID: 26892223 DOI: 10.1007/s10529-016-2047-x
    The adhesion of colloidal probes of stainless steel, glass and cellulose to Pseudomonas fluorescens biofilms was examined using atomic force microscopy (AFM) to allow comparisons between surfaces to which biofilms might adhere.
    Matched MeSH terms: Stainless Steel
  11. Fulltext Allergic reaction to stainless steel sternotomy wires requiring removal: A case report and literature review
    Lopez JM, Sachithanandan A, Leow MP
    Med J Malaysia, 2016 Jun;71(3):142-3.
    PMID: 27495890 MyJurnal
    Hypersensitivity to stainless steel sternal sutures are an uncommon occurrence. We present a case of such a patient who developed chronic tissue overgranulation over a sternotomy wound eight weeks post-operatively. Primary suspicion was infection, a more common complication however radiological and laboratory investigation showed otherwise. Conservative management provided limited ephemeral success. After ensuring adequate sternal bone healing, the sutures and granulation tissue were eventually surgically removed without complication and the reoperated wound healed well.
    Matched MeSH terms: Steel
  12. Fulltext An Eddy Current Testing Platform System for Pipe Defect Inspection Based on an Optimized Eddy Current Technique Probe Design
    Rifai D, Abdalla AN, Razali R, Ali K, Faraj MA
    Sensors (Basel), 2017 Mar 13;17(3).
    PMID: 28335399 DOI: 10.3390/s17030579
    The use of the eddy current technique (ECT) for the non-destructive testing of conducting materials has become increasingly important in the past few years. The use of the non-destructive ECT plays a key role in the ensuring the safety and integrity of the large industrial structures such as oil and gas pipelines. This paper introduce a novel ECT probe design integrated with the distributed ECT inspection system (DSECT) use for crack inspection on inner ferromagnetic pipes. The system consists of an array of giant magneto-resistive (GMR) sensors, a pneumatic system, a rotating magnetic field excitation source and a host PC acting as the data analysis center. Probe design parameters, namely probe diameter, an excitation coil and the number of GMR sensors in the array sensor is optimized using numerical optimization based on the desirability approach. The main benefits of DSECT can be seen in terms of its modularity and flexibility for the use of different types of magnetic transducers/sensors, and signals of a different nature with either digital or analog outputs, making it suited for the ECT probe design using an array of GMR magnetic sensors. A real-time application of the DSECT distributed system for ECT inspection can be exploited for the inspection of 70 mm carbon steel pipe. In order to predict the axial and circumference defect detection, a mathematical model is developed based on the technique known as response surface methodology (RSM). The inspection results of a carbon steel pipe sample with artificial defects indicate that the system design is highly efficient.
    Matched MeSH terms: Steel
  13. Fulltext An improved in-house method for the determination of 241am in surface sediment within the exclusive economic zone of east coast peninsular Malaysia
    Wo, Yii Mei, Hidayah Shahar, Zaharudin Ahmad
    Jurnal Sains Nuklear Malaysia, 2013;25(2):30-39.
    MyJurnal
    Present of 241Am in the environment is being determined as part of surveillance and research
    programs related to nuclear activities. The separation of 241Am from environmental samples was
    carried out against the IAEA’s reference material by using an improved in-house radiochemical
    separation method through anion exchange column, followed by the electro-deposition on a
    stainless steel disc, and finally assayed on alpha spectrometry counting system. The resulting
    spectra showed good isolated peak, indicating a good separation of the radionuclide of interest.
    The analytical results were in good agreement with the certified value for IAEA-326 and IAEA-368
    with the calculated U-score was 0.36 and 0.82, respectively, showing no significant difference
    between the experimental and certified value. Using this method, distributions of 241Am in seabed
    surface sediment in the Exclusive Economic Zone of East Coast Peninsular Malaysia were studied.
    Samples were collected during June 2008 where the concentrations of 241Am were found to be
    ranged from < 0.08 to 0.36 Bq/kg, dry weight.
    Matched MeSH terms: Stainless Steel
  14. Fulltext An integrated methodology for establishing industrial effluent limits in developing countries: Iran as a case study
    Mahjouri M, Ishak MB, Torabian A, Manaf LA, Halimoon N
    J Environ Health Sci Eng, 2018 Dec;16(2):181-192.
    PMID: 30728990 DOI: 10.1007/s40201-018-0306-6
    Background: Environmental policies should be developed in a contextual decision-making process regarding local environmental concerns emphasizing the economic, technical, social and institutional considerations. Establishing emission limit levels, especially in the industrial sector, is one of the most problematic environmental issues in developing countries, for which it is essential to include several criteria that reflect their country-specific constraints and capacities. Since Best Available Technology (BAT) is acknowledged to be the reference element for sustainable development and a basis for Emissions Limit Values (ELVs), the objective of this study is to present a reliable methodology for establishing ELVs thresholds with an emphasis on the BAT concept for national regulation at the sector level.

    Methods: A hybrid fuzzy multiple-criteria decision-making (FMCDM) process, consisting of the Analytic Hierarchy Process (AHP) and fuzzy Technique for Order of Preference by Similarity to Ideal Solution (fuzzy TOPSIS) method, is structured to aggregate the different criteria and rank different ELV alternatives in this complicated evaluation. In order to use the most profound knowledge and judgment of a professional expert team, this qualitative assessment highlights the importance of supportive information.

    Results: The results obtained indicate that experts have considered the country-specific information as a reliable reference in their decisions. Among different key evaluation criteria in effluent standard setting, the highest experts' priority is "Environmental protection". For both the conventional and toxic pollutants, the influence of all other criteria namely "Economic feasibility", "Technology viability" and "Institutional capacity", as constraining criteria in developing countries, have not reduced the responsibility towards the environmental objectives. In ELVs ranking, experts have made their decisions with respect to the specific characteristics of each pollutant and the existing capacities and constraints of the country, without emphasizing on any specific reference.

    Conclusions: This systematic and transparent approach has resulted in defensible country-specific ELVs for the Iron and Steel industry, which can be developed for other sectors. As the main conclusion, this paper demonstrates that FMCDM is a robust tool for this comprehensive assessment especially regarding the data availability limitations in developing countries.

    Matched MeSH terms: Steel
  15. Fulltext An investigation on longitudinal residual strains distribution of thin-walled press-braked cold formed steel sections using 3D FEM technique
    Mutafi A, Yidris N, Ishak MR, Zahari R
    Heliyon, 2018 Nov;4(11):e00937.
    PMID: 30839801 DOI: 10.1016/j.heliyon.2018.e00937
    Steel sections are normally shaped via cold work manufacturing processes. The extent of cold work to shape the steel sections might induce residual stresses in the region of bending. Previously, researchers had performed studies on the influences of local buckling on the failure behavior of steel compression members which shown that failure will happen when most of the yielding has extended to the middle surface in the bend region of the sections. Therefore, these cold work methods may have major effect on the behavior of the steel section and also its load-bearing capability. In addition, another factor may play significant role in formed section's load-bearing capacity which is the longitudinal residual strain. The longitudinal residual strain raised during forming procedure can be used to define the section imperfection of the formed section and its relation to the existence of defects. Therefore, the main motivation of this research paper is to perform three-dimensional finite element (3D-FE) to investigate peak longitudinal residual strains of a thin-walled steel plate with large bending angle along member length. A 3D finite element simulation in ABAQUS has been employed to simulate this forming process. The study concluded that the longitudinal residual strain at the section corner edge was higher than those at the rest of the corner region. These strains at the edge were higher than the yield strain


    (



    ε


    y



    )


    of the formed section which occurred due to the lack of transverse restraint. This made the plate edge tended to bend toward the normal direction when it was under a high transverse bending. This causes a significant difference in longitudinal strain at the plate edge.
    Matched MeSH terms: Steel
  16. Analysis of laser sintered materials using finite element method
    AHMAD SHAHIR BIN JAMALUDIN, ABDULLAH BIN YASSIN
    Sains Malaysiana, 2013;42:1727-1733.
    Invention of milling combined laser sintering system (MLSS) is able to reduce the mould manufacturing time and improve the mould accuracy. Thus, more study is needed to increase the understanding for the laser sintered material machining characteristic to gain benefit from the invention of MLSS. This paper clarified the analysis of laser sintered material machinability with the application of Finite Element Method (FEM). Mild steel AISI1055 was applied in developing the Finite Element model in this study due to its popularity in machinability test and adequate level of data availability. 2D orthogonal cutting was employed on edge design tools with updated Lagrangian coupled thermo mechanical plane strain model. Adaptive meshing, tool edge radius and various types of friction models were assigned to obtain efficient simulations and precise cutting results. Cutting force and cutting-edge temperature estimated by Finite Element Method are validated against corresponding experimental values by previous researchers. In the study, cutting force increases when radial depth increases and lowest error acquired when the shear friction factor of 0.8 was applied. Machining simulation for laser sintered materials estimated lower cutting force compared with mild steel AISI1055 due to lower Young modulus. Higher cutting temperature estimated for machining simulation laser sintered material compared with machining simulation mild steel AISI1055 due to its low thermal conductivity.
    Matched MeSH terms: Steel
  17. Fulltext Analysis of machining pit by using electrical discharge machine die sinking
    Md Razak Daud, Wan Nor Shela Ezwane Wan Jusoh, Syahrullail Samion
    Journal of Engineering and Science Research, 2018;2(6):63-67.
    MyJurnal
    This study investigates metal removal rate (MRR) of the biomaterial by using discharge machine Neuar CNC A50 Electrical Discharge Machine Die Sinking (EDM DS). The purpose of this study is to compare machining curvature cup for material SKD 11 and stainless steel with shape curvature cup acetabular. The result showed that electrode wear is higher when high current is applied. For each applied current 0.5A and 3.0A could result electrode wear of 0.236 mm, 0.246 mm and 0.269 mm respectively. Mean time of complete discharged for each pit with 0.3mm depth with supply 0. 5A is 6.51 minutes; 1. 5A is 3.54 minutes and 3A is 1.52 minutes. The biggest mean parameter of the pit is 0.356 mm, with 3A of current is applied. From this study, it can be concluded that low current set may give lower electrode copper wear. The experiment will help a researcher to discharge biomaterial types of metal with small size of copper electrode use of EDM DS Neuar for discharge multi hole or micro pit.
    Matched MeSH terms: Stainless Steel
  18. Analysis of natural okra extracts as corrosion inhibitors for mild steel in acidic medium
    Sulaimon AA, Murungi PI, Tackie-Otoo BN, Nwankwo PC, Bustam MA
    Environ Sci Pollut Res Int, 2023 Dec;30(56):119309-119328.
    PMID: 37924403 DOI: 10.1007/s11356-023-30635-0
    Plant extracts have been shown to effectively inhibit metal corrosion. Using the Box-Behnken design, gravimetric, and electrochemical techniques, analyses were designed to investigate the anti-corrosion potential of okra in a 1M HCl medium. The inhibition performances derived from the various methods were in good agreement, demonstrating that physio-chemisorption was effective and adhered to the Langmuir isotherm model. The efficiency of okra mucilage extract was 96% at a much lower concentration compared to 91.2% and 88.4% for the unsieved extract and gelly-okra filtrate, respectively. FTIR results showed the presence of several functional groups in the okra mucilage extract that are associated with adsorption, and TGA analysis revealed that the extract has high thermal stability. FESEM analysis also supported evidence of adsorption. It was determined that corrosion inhibition by okra mucilage extract was primarily influenced by temperature, followed by extract concentration, with immersion time having the least effect. From the model optimization, it was observed that okra mucilage extract at 200 ppm, 60°C, and 24 h gave an inhibition efficiency of 89.98% and high desirability. These results demonstrate the high capacity of natural okra as an efficient biodegradable corrosion inhibitor.
    Matched MeSH terms: Steel
  19. Fulltext Analysis of shotcrete lining of underground tunnels
    Ghiasi, Vahed, Husaini Omar
    Pertanika Journal of Science & Technology, 2011;19(2):249-257.
    MyJurnal
    Shotcrete is a process where concrete is projected or “shot” under pressure, using a feeder or a
    “gun” onto a surface to form structural shapes including walls, floors, and roofs. The surface can
    be wood, steel, polystyrene, or any other surfaces that concrete can be projected onto. The surface
    can be trowel led smooth while the concrete is still wet. Shotcrete has high strength, durability, low
    permeability, excellent bond, and limitless shape possibilities. These properties allow shotcrete
    to be used as a structural material in most cases. Although the hardened properties of shotcrete
    are similar to conventional cast-in-place concrete, the nature of the placement process provides
    additional benefits, such as excellent bond with most substrates and instant or rapid capabilities,
    particularly on complex forms or shapes. In addition to building homes, shotcrete can also be used
    to build pools. The practice of underground tunneling shows that the degree of stability of tunnels
    is dependent on the state of the soil, rock mass, and shotcrete around the tunnel contour. The
    development in the urban or suburban areas leads to the construction of tunnels in all kinds of soil
    and rock. Meanwhile, the construction of tunnels in shallow depth or soft soils causes the ground
    to displace. The determination of soil and rock mechanical properties to assess the stability of New
    Austrian Tunnelling Method (NATM) tunnels and design the support system is one of the most
    important steps in tunnelling. This paper provides information pertaining to the safety and increase
    the stability of NATM tunnel before, during and after the operation of the tunnel. Therefore, the
    shotcrete process is a recognized method for cemented sandy silt stabilization, with the aid of high
    pressure shot concrete to increase the stability of tunnels.
    Matched MeSH terms: Steel
  20. Fulltext Anticorrosive and Microbial Inhibition Performance of a Coating Loaded with Andrographis paniculata on Stainless Steel in Seawater
    Kamaruzzaman WMIWM, Fekeri MFM, Nasir NAM, Hamidi NASM, Baharom MZ, Adnan A, et al.
    Molecules, 2021 Jun 03;26(11).
    PMID: 34205014 DOI: 10.3390/molecules26113379
    With the trend for green technology, the study focused on utilizing a forgotten herb to produce an eco-friendly coating. Andrographis paniculata or the kalmegh leaves extract (KLE) has been investigated for its abilities in retarding the corrosion process due to its excellent anti-oxidative and antimicrobial properties. Here, KLE was employed as a novel additive in coatings and formulations were made by varying its wt%: 0, 3, 6, 9, and 12. These were applied to stainless steel 316L immersed in seawater for up to 50 days. The samples were characterized and analyzed to measure effectiveness of inhibition of corrosion and microbial growth. The best concentration was revealed to be 6 wt% KLE; it exhibited the highest performance in improving the ionic resistance of the coating and reducing the growth of bacteria.
    Matched MeSH terms: Stainless Steel/pharmacology*; Stainless Steel/chemistry
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links