Granulation is an important step during the production of urea granules. Most of the commercial binders used for granulation are toxic and non-biodegradable. In this study, a fully biodegradable and cost-effective starch-based binder is used for urea granulation in a fluidized bed granulator. The effect of binder properties such as viscosity, surface tension, contact angle, penetration time, and liquid bridge bonding force on granulation performance is studied. In addition, the effect of fluidized bed process parameters such as fluidizing air inlet velocity, air temperature, weight of primary urea particles, binder spray rate, and binder concentration is also evaluated using response surface methodology. Based on the results, binder with higher concentration demonstrates higher viscosity and higher penetration time that potentially enhance the granulation performance. The viscous Stokes number for binder with higher concentration is lower than critical Stokes number that increases coalescence rate. Higher viscosity and lower restitution coefficient of urea particles result in elastic losses and subsequent successful coalescence. Statistical analysis indicate that air velocity, air temperature, and weight of primary urea particles have major effects on granulation performance. Higher air velocity increases probability of collision, whereby lower temperature prevents binder to be dried up prior to collision. Findings of this study can be useful for process scale-up and industrial application.
Accurate values are a must in medicine. An important parameter in determining the quality of a medical instrument is agreement with a gold standard. Various statistical methods have been used to test for agreement. Some of these methods have been shown to be inappropriate. This can result in misleading conclusions about the validity of an instrument. The Bland-Altman method is the most popular method judging by the many citations of the article proposing this method. However, the number of citations does not necessarily mean that this method has been applied in agreement research. No previous study has been conducted to look into this. This is the first systematic review to identify statistical methods used to test for agreement of medical instruments. The proportion of various statistical methods found in this review will also reflect the proportion of medical instruments that have been validated using those particular methods in current clinical practice.
Matched MeSH terms: Weights and Measures/instrumentation; Weights and Measures/standards
This data article is about bats observed from fragmented forest understories interspaced by agricultural plantations, utility corridors, and man-made structures within rural areas of Setiu (Bukit Kesing Forest Reserve and Ladang Tayor TDM) and Hulu Terengganu (Pengkalan Utama and Sungai Buweh, Kenyir) that are situated in Terengganu state, Peninsular Malaysia. Surveys were conducted from October 2018 until January 2019. These bats were captured using harp traps and mist nets that were set 30 m apart across flyways, streams, rivers and less cluttered trees in the 50 m transect zones (identified at each site). All animals captured were distinguished by morphology and released at the same location it was caught. The data comprise of 15 species of bats from four family groups, namely Hipposideridae, Pteropodidae, Rhinolophidae and Vespertilionidae. The data were interpreted into weight-forearm length (W-FA) to inform about bats Body Condition Index (-0.25 to 0.25).
Research on joint torque reduction in robot manipulators has received considerable attention in recent years. Minimizing the computational complexity of torque optimization and the ability to calculate the magnitude of the joint torque accurately will result in a safe operation without overloading the joint actuators. This paper presents a mechanical design for a three dimensional planar redundant manipulator with the advantage of the reduction in the number of motors needed to control the joint angle, leading to a decrease in the weight of the manipulator. Many efforts have been focused on decreasing the weight of manipulators, such as using lightweight joints design or setting the actuators at the base of the manipulator and using tendons for the transmission of power to these joints. By using the design of this paper, only three motors are needed to control any n degrees of freedom in a three dimensional planar redundant manipulator instead of n motors. Therefore this design is very effective to decrease the weight of the manipulator as well as the number of motors needed to control the manipulator. In this paper, the torque of all the joints are calculated for the proposed manipulator (with three motors) and the conventional three dimensional planar manipulator (with one motor for each degree of freedom) to show the effectiveness of the proposed manipulator for decreasing the weight of the manipulator and minimizing driving joint torques.
Double-burden of malnutrition (DBM) is an emerging public health concern among the Orang Asli (indigenous peoples) of Peninsular Malaysia. This study aimed to identify the presence of DBM at the community and household levels in Orang Asli population and its associated demographic and socio-economic factors.
General obesity, as reflected by BMI, is an established risk factor for esophageal adenocarcinoma (EAC), a suspected risk factor for gastric cardia adenocarcinoma (GCC) and appears unrelated to gastric non-cardia adenocarcinoma (GNCC). How abdominal obesity, as commonly measured by waist circumference (WC), relates to these cancers remains largely unexplored. Using measured anthropometric data from 391,456 individuals from the European Prospective Investigation into Cancer and Nutrition (EPIC) study and 11 years of follow-up, we comprehensively assessed the association of anthropometric measures with risk of EAC, GCC and GNCC using multivariable proportional hazards regression. One hundred twenty-four incident EAC, 193 GCC and 224 GNCC were accrued. After mutual adjustment, BMI was unrelated to EAC, while WC showed a strong positive association (highest vs. lowest quintile HR = 1.19; 95% CI, 0.63-2.22 and HR = 3.76; 1.72-8.22, respectively). Hip circumference (HC) was inversely related to EAC after controlling for WC, while WC remained positively associated (HR = 0.35; 0.18-0.68, and HR=4.10; 1.94-8.63, respectively). BMI was not associated with GCC or GNCC. WC was related to higher risks of GCC after adjustment for BMI and more strongly after adjustment for HC (highest vs. lowest quintile HR = 1.91; 1.09-3.37, and HR = 2.23; 1.28-3.90, respectively). Our study demonstrates that abdominal, rather than general, obesity is an indisputable risk factor for EAC and also provides evidence for a protective effect of gluteofemoral (subcutaneous) adipose tissue in EAC. Our study further shows that general obesity is not a risk factor for GCC and GNCC, while the role of abdominal obesity in GCC needs further investigation.
A twelve-week controlled intervention trial was carried out to evaluate the effects of combined physical activity and dietary intervention on obesity and metabolic risk factors among employees of Universiti Putra Malaysia. Participants consisted of adults aged 25-55 years with no reported chronic diseases but with abdominal obesity. They were assigned to either a combined physical activity and dietary intervention group or a control group. The final sample consisted of 56 participants, with an equal number of 28 for each study group. No significant group effect was observed for any variable except for hip circumference (HC) and fasting plasma glucose (FPG). There was a significant increase in HC (p=0.007) and reduction in FPG (p=0.02) in the intervention group compared to the control group. In the intervention group, HC (p=0.002), triglycerides (TG) (p=0.0001), total cholesterol (TC) (p=0.0001), LDL cholesterol (LDLC) (p=0.0001) and FPG (p=0.005) were significantly reduced, while waist circumference (WC) (p=0.025) and the waist-to-hip ratio (WHR) (p=0.027) were significantly reduced in the control group. No significant change in steps/day or calorie intake'was observed in either group. Taken together, these data indicate that the combined physical activity and dietary intervention was not effective at improving diet or physical activity level. However, the intervention was effective in improving FPG among participants with abdominal obesity. The significant increase in HC in the interventions group warrants further study. These findings will be useful to further improve group-based intervention for the prevention and management of obesity.
Free-piston engine generators (FPEGs) have huge potential to be the principal energy conversion device for generating electricity from fuel as part of a hybrid-electric vehicle (EV) powertrain system. The principal advantages lay in the fact that they are theoretically more efficient, more compact, and more lightweight compared to other competing EV hybrid and range-extender solutions (internal combustion engines, rotary engines, fuel cells, etc.). However, this potential has yet to be realized. This article details a novel dual-piston FPEG configuration and presents the full layout of a system and provides technical evidence of a commercial FPEG system's likely size and weight. The work also presents the first results obtained from a project which set-out to realize an operational FPEG system in hardware through the development and testing of a flexible prototype test platform. The work presents the performance and control system characteristics, for a first of a kind system; these show great technical potential with stable and repeatable combustion events achieved with around 700 W per cylinder and 26% indicated efficiency.
Bridges are designed to withstand different types of loads, including dead, live, environmental, and occasional loads during their service period. Moving vehicles are the main source of the applied live load on bridges. The applied load to highway bridges depends on several traffic parameters such as weight of vehicles, axle load, configuration of axles, position of vehicles on the bridge, number of vehicles, direction, and vehicle's speed. The estimation of traffic loadings on bridges are generally notional and, consequently, can be excessively conservative. Hence, accurate prediction of the in-service performance of a bridge structure is very desirable and great savings can be achieved through the accurate assessment of the applied traffic load in existing bridges. In this paper, a review is conducted on conventional vehicle-based health monitoring methods used for bridges. Vision-based, weigh in motion (WIM), bridge weigh in motion (BWIM), drive-by and vehicle bridge interaction (VBI)-based models are the methods that are generally used in the structural health monitoring (SHM) of bridges. The performance of vehicle-assisted methods is studied and suggestions for future work in this area are addressed, including alleviating the downsides of each approach to disentangle the complexities, and adopting intelligent and autonomous vehicle-assisted methods for health monitoring of bridges.
BACKGROUND: Osteoporotic fracture is a major health burden. Early diagnosis and management would improve the quality of life and reduce costs to the society.
OBJECTIVE: We aimed to identify risk factors associated with osteoporosis followed by development and validation of a screening tool in the hope of providing an appropriate regime to detect low bone density (BMD) in Malaysia.
METHODOLOGY: Between November 1999 and November 2002, 514 healthy women aged ≥ 45 with intact uterus, non-HRT users were recruited. Following BMD testing, a screening tool was developed. For validation, 72 women were recruited from June 2003 to December 2003.
RESULTS: Age and a longer duration postmenopause were negatively linked to BMD. Higher family income, BMI, waist and hip circumference were positively correlated. A score of ≥ 4, the screening tool had a sensitivity of 73.2%, a specificity of 61.6% for identifying women with low BMD (T score ≤ -2) plus a sensitivity of 80.2% in selecting women with osteoporosis. The tool enabled a 45.9% reduction in unnecessary DEXA testing. Validation of the screening tool showed a negative predictive value of 97.8%, sensitivity and specificity of 87.5% and 70.3%, respectively.
CONCLUSION: The Malaysian Osteoporosis Screening Tool (MOST) is relatively simple. Its usage may reduce unnecessary DEXA test.
In a meristic, morphometric and distributional study of Neolissochilus from Peninsular Malaysia, Khaironizam et al. (2015) subsumed Lissochilus tweediei Herre in Herre & Myers 1937 and a taxon they called "Tor soro Bishop 1973" into the synonymy of N. soroides (Duncker 1904) based on data collected from museum specimens. However, "Bishop 1973" is not the correct author citation for Tor soro. Instead, Tor (now placed in Neolissochilus) soro was originally described as Barbus soro by Valenciennes in Cuvier & Valenciennes (1842:191). Since "Tor soro Bishop 1973" is not a valid name/author combination, Neolissochilus soro, as treated by Khaironizam et al. (2015), cannot be considered a junior synonym of N. soroides.
The physico-mechanical properties data of fruits are important in the design of various handling, packing, and storage and transportation system. The physical-mechanical properties of pineapple fruit from the Josapine variety, namely the weight of the fruit (with and without peel), pulp to peel ratio, diameter of the whole fruit (with and without peel), at three different positions along the longitudinal axis of the fruit, length of the fruit (with and without peel) and the length of crown were studied using the standard method at seven stages of maturity during storage at 25°C and 52% (RH). The effect of fruit maturity on the firmness of each fruit at three different locations was measured using a cylindrical die of 6 mm in diameter with the Instron Universal Testing Machine. The results indicated that the average total weight of a single fruit is 886.86 ± 49.67 g. The average pulp to peel ratio is 1.91. The average diameter (with and without peel) was 86.83 ± 5.24 mm and 80.95 ± 4.15 mm (top section), 100.77 ± 3.84 mm and 90.19 ± 3.73 mm (middle section) and 97.17 ± 3.49 mm and 73.30 ± 5.11 mm (bottom section), respectively. The average length of the fruit (with and without peel) was 126.65 mm and 113.64 mm, respectively. The average length of crown was 89.13 mm. The firmness of the fruits was found to decrease with the stage of maturity. These data are important in determining the optimum stage of maturity for fruit processing.
Traditionally it was thought that fitness-related traits such as male mating frequency, with a history of strong directional selection, should have little additive genetic variance and thus respond asymmetrically to bidirectional artificial selection. However, recent findings and theory suggest that a balance between selection for increased male mating frequency and opposing selection pressures on physiologically linked traits will cause male mating frequency to have high additive genetic variation and hence respond symmetrically to selection. We tested these hypotheses in the stalk-eyed fly, Cyrtodiopsis dalmanni, in which males hold harems comprising many females and so have the opportunity to mate at extremely high frequencies. We subjected male stalk-eyed flies to artificial selection for increased ('high') and decreased ('low') mating frequency in the presence of ecologically realistic, high numbers of females. High line males mated significantly more often than control or low line males. The direct response to selection was approximately symmetric in the high and low lines, revealing high additive genetic variation for, and no significant genetic constraints on, increased male mating frequency in C. dalmanni. In order to investigate trade-offs that might constrain male mating frequency under natural conditions we examined correlated responses to artificial selection. We measured accessory gland length, testis length and eyespan after 7 and 14 generations of selection. High line males had significantly larger accessory glands than low line males. No consistent correlated responses to selection were found in testis length or eyespan. Our results suggest that costs associated with the production and maintenance of large accessory glands, although yet to be identified, are likely to be a major constraint on mating frequency in natural populations of C. dalmanni.
We put attention on Intrinsic Josephson Junction (IJJ) to study the fundamental physic for device applications. Convenient self-flux method was used to grow BSCCO single crystals. We investigated the lid effect to examine the single crystal growth of high TC (Critical Temperature). We found that for the crystal growth with no lid, two stage transitions of TC ≅ 61 K and 77 K were observed. While for the crystal growth with lid, the BSCCO has TC ≅ 80K, ΔTC = 10K and approximately average size5x2mm 2 . When we increased weight of lid, the single crystal have increased to TC =80K, ΔTC = 4K and the typical size was ≅7x3mm 2 . TC and the crystal growth show a tendency to increase by the effect of the lid. From observed quasi-particle characteristics, c-axis direction changed from semiconductor to intrinsic Josephson characteristic with decreasing temperature.
The alkali-silica reaction (ASR) is an important consideration in ensuring the long-term durability of concrete materials, especially for those containing reactive aggregates. Although fly ash (FA) has proven to be useful in preventing ASR expansion, the filler effect and the effect of FA fineness on ASR expansion are not well defined in the present literature. Hence, this study aimed to examine the effects of the filler and fineness of FA on ASR mortar expansion. FAs with two different finenesses were used to substitute ordinary Portland cement (OPC) at 20% by weight of binder. River sand (RS) with the same fineness as the FA was also used to replace OPC at the same rate as FA. The replacement of OPC with RS (an inert material) was carried out to observe the filler effect of FA on ASR. The results showed that FA and RS provided lower ASR expansions compared with the control mortar. Fine and coarse fly ashes in this study had almost the same effectiveness in mitigating the ASR expansion of the mortars. For the filler effect, smaller particles of RS had more influence on the ASR reduction than RS with coarser particles. A significant mitigation of the ASR expansion was obtained by decreasing the OPC content in the mortar mixture through its partial substitution with FA and RS.
Logistic regression was applied to develop a morphometric sexing method of two closely related stork species that were previously sexed through amplification of the CHD gene. Tarsus length (TL) and bill length (BL) measurements were recorded from captive populations of adult Milky Stork (Mycteria cinerea) (n = 60) and Painted Stork (Mycteria leucocephala) (n = 58) at Zoo Negara Malaysia. Despite having monomorphic plumages, both stork species exhibited normal sexual size dimorphism in which males were significantly larger than females in the tested variables. Based on logistic regression analysis, BL correctly classified the sex of sampled individuals from Painted and Milky stork with an overall predicted accuracy of 94.8 and 90.0%, respectively. However, TL measurements generated a lower predicted accuracy level of 86.2% and a same accuracy level of 90% on the sex classification of individuals from Painted and Milky stork, respectively. By comparing the measurements of both species, only the average BL measurements of the Milky storks were significantly lower than that of Painted storks (t-test, P80.001). The logistic regression equation in this study may serve as a simple and more practical option for sexing Milky and Painted storks for their breeding and conservation programmes.
This paper presents a comparison on the effects of blending chitin and/or starch with poly(lactic acid) (PLA). Three sets of composites (PLA-chitin, PLA-starch and PLA-chitin-starch) with 92%, 94%, 96% and 98% PLA by weight were prepared. The percentage weight (wt.%) amount of the chitin and starch incorporated ranges from 2% to 8%. The mechanical, dynamic mechanical, thermal and microstructural properties were analyzed. The results from the tensile strength, yield strength, Young's modulus, and impact showed that the PLA-chitin-starch blend has the best mechanical properties compared to PLA-chitin and PLA-starch blends. The dynamic mechanical analysis result shows a better damping property for PLA-chitin than PLA-chitin-starch and PLA-starch. On the other hand, the thermal property analysis from thermogravimetry analysis (TGA) shows no significant improvement in a specific order, but the glass transition temperature of the composite increased compared to that of neat PLA. However, the degradation process was found to start with PLA-chitin for all composites, which suggests an improvement in PLA degradation. Significantly, the morphological analysis revealed a uniform mix with an obvious blend network in the three composites. Interestingly, the network was more significant in the PLA-chitin-starch blend, which may be responsible for its significantly enhanced mechanical properties compared with PLA-chitin and PLA-starch samples.