Displaying publications 1 - 20 of 92 in total

Abstract:
Sort:
  1. Kitano YF, Benzoni F, Arrigoni R, Shirayama Y, Wallace CC, Fukami H
    PLoS One, 2014;9(5):e98406.
    PMID: 24871224 DOI: 10.1371/journal.pone.0098406
    The family Poritidae formerly included 6 genera: Alveopora, Goniopora, Machadoporites, Porites, Poritipora, and Stylaraea. Morphologically, the genera can be differentiated based on the number of tentacles, the number of septa and their arrangement, the length of the polyp column, and the diameter of the corallites. However, the phylogenetic relationships within and between the genera are unknown or contentious. On the one hand, Alveopora has been transferred to the Acroporidae recently because it was shown to be more closely related to this family than to the Poritidae by previous molecular studies. On the other hand, Goniopora is morphologically similar to 2 recently described genera, Machadoporites and Poritipora, particularly with regard to the number of septa (approximately 24), but they have not yet been investigated at the molecular level. In this study, we analyzed 93 samples from all 5 poritid genera and Alveopora using 2 genetic markers (the barcoding region of the mitochondrial COI and the ITS region of the nuclear rDNA) to investigate their phylogenetic relationships and to revise their taxonomy. The reconstructed molecular trees confirmed that Alveopora is genetically distant from all poritid genera but closely related to the family Acroporidae, whereas the other genera are genetically closely related. The molecular trees also revealed that Machadoporites and Poritipora were indistinguishable from Goniopora. However, Goniopora stutchburyi was genetically isolated from the other congeneric species and formed a sister group to Goniopora together with Porites and Stylaraea, thus suggesting that 24 septa could be an ancestral feature in the Poritidae. Based on these data, we move G. stutchburyi into a new genus, Bernardpora gen. nov., whereas Machadoporites and Poritipora are merged with Goniopora.
    Matched MeSH terms: Body Weights and Measures
  2. Khairul Azly Zahan, Norhayati Pa’e, Ida Idayu Muhamad
    Sains Malaysiana, 2016;45:393-400.
    Acetobacter xylinum strains are known as efficient producers of cellulose. A. xylinum is an obligate aerobic bacterium that has an oxygen-based metabolism. The dissolved oxygen (DO) concentration in a rotary discs reactor (RDR) is one of the most important factors that need to be observed during the cellulose synthesis by these bacteria. In this study, the effects of different discs rotation speed (5, 7, 9 and 12 rpm) and fermentation period (3, 4, 5 and 6 days) on the DO concentration and production of bacterial cellulose in a 10-L RDR were examined. The highest yield was obtained at 7 rpm with a total dried weight of 28.3 g for 4 days fermentation. The results showed that the DO concentration in the 10-L RDR increased in the range of 13 to 17% with increasing of discs rotation speed from 7 to 12 rpm. However, fermentation with high discs rotation speed at 12 rpm reduced the bacterial cellulose production. Analysis of data using Statistica 8.0 showed a high coefficient of determination value (R2 = 0.92). In conclusion, discs rotation speed gave more significant effect on the DO concentration and production of bacterial cellulose in 10-L RDR compared to fermentation period. This was further combined with synergistic effect from sufficient consumption of oxygen for the enhanced production of bacterial cellulose and providing the controlled environment for encouraging bacterial growth throughout the fermentation process.
    Matched MeSH terms: Body Weights and Measures
  3. Gokhan Gunduz, Barbaros Yaman, Seray Ozden, Suleyman Donmez
    Sains Malaysiana, 2013;42:547-552.
    Composite archery bows have been well known and used by Asiatic societies for thousands of years. The Turkish composite bow, made of wood, horn, sinew and glue is one of the most famous and powerful bows in the world. Because of its high draw weight and mechanical efficiency, the Turkish composite bow became a powerful weapon in the Seljuk and the Ottoman empire. In addition to being a powerful weapon of war, at the same time the bow and arrow (archery) continued
    to be a sport of Ottoman (sultans, state officials, janissaries) until the late Ottoman period. In this study of the Ottoman composite archery bows in the collections of Izmir Ethnography Museum, a small wood sample was investigated on the basis of its wood anatomy. The results showed that it was made of maple wood (Acer sp.) and some of its qualitative and quantitative anatomical properties are presented here. One of the key properties for the identification of maple wood is
    the helical thickening throughout the body of the vessel element. Helical thickenings in vessel elements in cutting surfaces of maple-wooden core increase the bonding surface between the wood and sinew-horn. In most of the woods preferred traditionally for bow-making, helical thickenings in tracheids, vessel elements or ground tissue fibres should be taken into account at a hierarchy of cellular structures for elucidating the efficiency of Ottoman composite-wooden bow.
    Matched MeSH terms: Body Weights and Measures
  4. Nuril Aida K, Idris A
    Anochetus maryatiae, a new species of Formicidae from the subfamily Ponerinae, tribe Ponerini from Ulu Gombak is described and illustrated. This ant genus was last studied in Malaysia by Brown in 1978. Observations were made on morphometric characters which included parameter measurements of total length, head length, head width, mandible length, scape length, antenna length, maximum eye length, oculomandibular distance, funicular length segment 1 to 4, pronotum width, propodeum height, petiole length, petiole height, dorsal petiole width, cephalix index and mandibular index. It was followed by a brief diagnosis, description of morphological structure, microsculpture, pilosity and discussion. Although it has resemblance with Anochetus tua, it could be easily distinguished from other species in having reticulate pronotum. This is the only species from Malaysia with such microsculpture on the pronotum. In addition to that, A. maryatie varies with A. tua in having smaller total length, less than 7.5 mm and lighter colour.
    Matched MeSH terms: Body Weights and Measures
  5. Ademola James, Rohani JM, Olusegun AG, Rani MR
    Work, 2014;47(2):173-81.
    PMID: 23324693 DOI: 10.3233/WOR-121530
    OBJECTIVE: The unavailability of anthropometric data especially in developing countries has remained a limiting factor towards the design of learning facilities with sufficient ergonomic consideration. Attempts to use anthropometric data from developed countries have led to provision of school facilities unfit for the users. The purpose of this paper is to use factor analysis to investigate the suitability of the collected anthropometric data as a database for school design in Nigerian tertiary institutions.
    PARTICIPANTS: Anthropometric data were collected from 288 male students in a Federal Polytechnic in North-West of Nigeria. Their age is between 18-25 years.
    METHODS: Nine vertical anthropometric dimensions related to heights were collected using the conventional traditional equipment. Exploratory factor analysis was used to categorize the variables into a model consisting of two factors. Thereafter, confirmatory factor analysis was used to investigate the fit of the data to the proposed model.
    RESULTS: A just identified model, made of two factors, each with three variables was developed. The variables within the model accounted for 81% of the total variation of the entire data. The model was found to demonstrate adequate validity and reliability. Various measuring indices were used to verify that the model fits the data properly. The final model reveals that stature height and eye height sitting were the most stable variables for designs that have to do with standing and sitting construct.
    CONCLUSION: The study has shown the application of factor analysis in anthropometric data analysis. The study highlighted the relevance of these statistical tools to investigate variability among anthropometric data involving diverse population, which has not been widely used for analyzing previous anthropometric data. The collected data is therefore suitable for use while designing for Nigerian students.
    KEYWORDS: Exploratory factor analysis; measurement model; school ergonomics
    Matched MeSH terms: Body Weights and Measures*
  6. Dawal SZ, Zadry HR, Azmi SN, Rohim SR, Sartika SJ
    Int J Occup Saf Ergon, 2012;18(4):461-72.
    PMID: 23294660
    This paper presents an anthropometric database of high school and university students from Kuala Lumpur, Malaysia. Forty-one high school participants (21 males and 20 females), 13-17 years old, and 143 university students (74 males and 69 females) took part in the study. Twenty-one static body dimensions were measured. The greatest mean differences in the anthropometric data between male and female high school students were found in the sitting elbow height. In addition, a comparison of anthropometric data of male and female university students showed that data for males and females were significantly different, except for buttock-popliteal length, sitting elbow height and thigh clearance. The primary aim of this study was to develop an anthropometric database that could be used as a primary reference in designing products, devices and equipment for ergonomic learning environments.
    Matched MeSH terms: Body Weights and Measures*
  7. Zakaria N, Tarmizi AA, Zuki MAM, Ahmad AB, Mamat MA, Abdullah MT
    Data Brief, 2020 Jun;30:105567.
    PMID: 32382599 DOI: 10.1016/j.dib.2020.105567
    This data article is about bats observed from fragmented forest understories interspaced by agricultural plantations, utility corridors, and man-made structures within rural areas of Setiu (Bukit Kesing Forest Reserve and Ladang Tayor TDM) and Hulu Terengganu (Pengkalan Utama and Sungai Buweh, Kenyir) that are situated in Terengganu state, Peninsular Malaysia. Surveys were conducted from October 2018 until January 2019. These bats were captured using harp traps and mist nets that were set 30 m apart across flyways, streams, rivers and less cluttered trees in the 50 m transect zones (identified at each site). All animals captured were distinguished by morphology and released at the same location it was caught. The data comprise of 15 species of bats from four family groups, namely Hipposideridae, Pteropodidae, Rhinolophidae and Vespertilionidae. The data were interpreted into weight-forearm length (W-FA) to inform about bats Body Condition Index (-0.25 to 0.25).
    Matched MeSH terms: Body Weights and Measures
  8. Mohamed Najib Salleh, Halim Mad Lazim, Hendrik Lamsali
    Movement Health & Exercise, 2018;7(1):179-187.
    MyJurnal
    Body measurement is the first process that must be encountered before any
    custom-made compression garment can be designed. The current practice of
    obtaining the measurement is by traditional methods using tools like
    measuring tape. However, this method is considered to be time-consuming
    and usually not accurate. The most popular solution to the problem is by using
    non-contact measurement. The development of the 3D whole body scanner
    has made non-contact body measurement become a reality due to its capacity
    to capture a vast amount of information. However, the cost to buy the whole
    body scanner is quite expensive. Moreover, their sizes are also bulky which
    make them less portable. Thus, a handheld body scanner provides a solution
    to the problem. Despite that, current handheld scanner only provide image
    and visualization aspect, but not the measurement aspect. This paper reports
    the development of a method to acquire body data from a 3D handheld
    scanner. In this new method, the point cloud of a body part was collected
    using the handheld scanner. Then, the data was transformed into point
    coordinates. Several processes were developed to filter the number of points
    to allow for faster processing time and increasing the measurement accuracy.
    In the first process, only points at specific height/layers are selected. In the
    second process, the remaining points are rearranged according to their height
    and angle. In the last process, the number of points is further reduced. In this
    process, the number of points per layer is limited to 72 points. Results show
    that the method can be used to determine body measurement.
    Matched MeSH terms: Body Weights and Measures
  9. Guo P, Chiew YS, Shaw GM, Shao L, Green R, Clark A, et al.
    Intensive Crit Care Nurs, 2016 Dec;37:52-61.
    PMID: 27401048 DOI: 10.1016/j.iccn.2016.05.003
    Monitoring clinical activity at the bedside in the intensive care unit (ICU) can provide useful information to evaluate nursing care and patient recovery. However, it is labour intensive to quantify these activities and there is a need for an automated method to record and quantify these activities. This paper presents an automated system, Clinical Activity Tracking System (CATS), to monitor and evaluate clinical activity at the patient's bedside. The CATS uses four Microsoft Kinect infrared sensors to track bedside nursing interventions. The system was tested in a simulated environment where test candidates performed different motion paths in the detection area. Two metrics, 'Distance' and 'Dwell time', were developed to evaluate interventions or workload in the detection area. Results showed that the system can accurately track the intervention performed by individual or multiple subjects. The results of a 30-day, 24-hour preliminary study in an ICU bed space matched clinical expectations. It was found that the average 24-hour intervention is 22.0minutes/hour. The average intervention during the day time (7am-11pm) is 23.6minutes/hour, 1.4 times higher than 11pm-7am, 16.8minutes/hour. This system provides a unique approach to automatically collect and evaluate nursing interventions that can be used to evaluate patient acuity and workload demand.
    Matched MeSH terms: Weights and Measures/instrumentation*; Weights and Measures/standards
  10. Johari A, Mat R, Alias H, Hashim H, Hassim M, Zakaria Z, et al.
    Sains Malaysiana, 2014;43:103-109.
    The combustion characteristics of refuse derived fuel (RDF) in a fluidized bed have been studied. The gross heating value (GHv) of the RDF was 14.43 MJIkg with moisture content of 25% by weight. Parameters of interest for sustainable bed combustion were the fluidization number and primary air factor. The study was performed in a rectangular fluidized bed combustor with dimensions of 0.3 m in width, 0.7 m in length and 2 m in height. Sand with mean particle size of 0.34 mm was used as a fluidization medium. The sand bed height was at 0.3 m above the standpipes air distributor. The range of fluidization number under investigation was 5-7 II fin which 5 II newas found to be the optimum. The study was continued for the determination of the optimum primary air factor with the selected range of primary air factors being 0.6, 0.8, 1.0 and 12 in experiments conducted at 5 Unit The final results showed that the optimum primary air factor was at 0.8. An energy balance was also performed to determine the thermal efficiency of the combustion. It was concluded that the thermal efficiency depended on the bed temperature and the primary air factor being used.
    Matched MeSH terms: Body Weights and Measures
  11. Amir Bahram Kashiani, Kim, Geok Soh, Kim, Lam Soh, Swee, Leong Ong, Kittichottipanich, Boonsrin
    Movement Health & Exercise, 2020;9(1):45-66.
    MyJurnal
    Several studies have shown a positive association between variable resistance training (VRT) and improvements in muscular performance. However, the effects of VRT on body composition among untrained individuals remain unclear. The objective of this study was to examine the comparison between of methods of VRT on body composition, muscular strength and functional capacity among untrained male adults. Fifty healthy untrained males (age: 21.5 ± 1.95 years) were selected randomly and assigned into three groups: combined weight and chain (WC), combined weight and elastic band (WE), and free-weight (CG). All three groups completed 12 weeks of high intensity resistance training (70-80% of one-repetition maximum) with three sets of 8-12 repetitions two times per week. Approximately 65% of the whole resistance was provided by free-weights, while the other 35% of the resistance was provided by chains and elastic bands for the WC and WE groups, respectively. Dependent variables including body composition, muscular strength and functional capacity using bioelectrical impedance analyzer, one-repetition maximum and maximum repetitions to muscular fatigue were measured, respectively in pre-test, post-test 1 (week 6) and post-test 2. Significance level was set at P < 0.05. No differences existed among all groups at baseline for depended variables. A mixed model ANOVA with repeated measurements analysis revealed that although there were not significant differences in body composition among the groups (P > 0.05), all groups showed a significant reduction in fat mass and significant increase in fat-free mass during and after the intervention (P = 0.0001), and these differences were insignificantly greater in WE and WC groups compared with CG group. Furthermore, all three groups showed significant improvements in muscular strength and functional capacity during and after intervention (P = 0.0001), and muscular strength and functional capacity were greater in WE and WC groups compared with the CG group, but there were not significant differences in muscular strength and functional capacity between WE and WC groups. However, the WE group showed insignificantly more improvement in muscular strength and functional capacity compared with the WC group during and after the intervention. The results of this study show that VRT has a slightly better effect than free-weight to improve body composition during and after 12 weeks intervention. Also, WE training had a slightly better effect than WC training in improving muscular strength and functional capacity during and after 12 weeks of VRT among untrained male adults.
    Matched MeSH terms: Body Weights and Measures
  12. Ihsan, Yudi Nurul, Khoirunisa, Nita Ulfah, Riyantini, Indah, Elfithri, Rahman, Pribadi, Tri Dewi K., Siti Nor Aisyah Md Bati
    MyJurnal
    Mini purse seine has a major contribution in increasing production of small pelagic catches in Pelabuhan Perikanan Pantai (PPP) Muncar. This research aimed to investigate the effectiveness and efficiency of mini one-boat and two-boat purse seine in Bali Strait, Indonesia. This research was conducted in Mei 2018 in Muncar, East Java, Indonesia. In this study, survey was used to get the data by distributed the questioners to the fisherman. The primary data are total catch composition, fork length, individual weight of total catch and operation time of both fishing gears. Data were analysed by main catch and bycatch proportion, legal size proportion and catch rate. The results showed that the mini two-boat purse seine had a greater catch volume compared to the mini one-boat purse seine. The bycatch composition dominates in both fishing gear. The proportion of legal-size catching is 67% of the total. The fork length is not significantly different and for the total catches is significantly different. The catching rate of the mini purse seine one boat catch rate is lower at 4,048.67 kg/hour, compared to the mini two-boat purse seine which is 9,189.18 kg/hour.
    Matched MeSH terms: Body Weights and Measures
  13. Nor Hasliza Mat Desa, Maznah Mat Kasim, Abdul Aziz Jemain
    Sains Malaysiana, 2015;44:239-247.
    The issue of age difference in hospital admission should be given special attention since it affects the structure of hospital care and treatments. Patients of different age groups should be given different priority in service provision. Due to crucial time and limited resources, healthcare managers need to make wise decisions in identifying priorities in age of admission. This paper aimed to propose a construction of a daily composite hospital admission index (CHAI) as an indicator that captures relevant information about the overall performance of hospital admission over time. It involves five different age groups of total patients admitted to seven major public hospitals in the Klang Valley, Malaysia for respiratory and cardiovascular diseases for a period of three years, 2008 - 2010. The criteria weights were predetermined by aggregating the subjective weight based on rank ordered centroid (ROC) method and objective weight based on entropy - kernel method. The highest and lowest scores of CHAI were marked, while the groups of patients were prioritized according to the criteria weight ranking orders.
    Matched MeSH terms: Body Weights and Measures
  14. Danish M, Kale P, Ahmad T, Ayoub M, Geremew B, Adeloju S
    Data Brief, 2020 Apr;29:105225.
    PMID: 32154335 DOI: 10.1016/j.dib.2020.105225
    The dataset presented here are part of the data planned to produce biodiesel from flaxseed. Biodiesel production from flaxseed oil through transesterification process using KOH as catalyst, and the operating parameters were optimized with the help of face-centered central composite design (FCCD) of response surface methodology (RSM). The operating independent variables selected such as, methanol oil ratio (4:1 to 6:1), catalyst (KOH) weight (0.40-1.0%), temperature (35 °C-65 °C), and reaction time (30 min-60 min) were optimized against biodiesel yield as response. The maximum yield (98.6%) of biodiesel from flaxseed can achieved at optimum methanol oil ratio (5.9:1), catalyst (KOH) weight (0.51%), reaction temperature (59.2 °C), and reaction time (33 min). The statistical significance of the data set was tested through the analysis of variance (ANOVA). These data were the part of the results reported in "Optimization of process variables for biodiesel production by transesterification of flaxseed oil and produced biodiesel characterizations" Renewable Energy [1].
    Matched MeSH terms: Body Weights and Measures
  15. B. Mabel Manjaji Matsumoto, Muhammad Ali Syed Hussein, Yee, Jean-Chai
    MyJurnal
    The central and north west coast of Sabah lies along the western extremity of the Coral Triangle, within which are situated several marine protected areas (MPAs). In the present study we determined in situ coral reef fish populations in several localities along the west coast of Sabah, by exploring species abundance, richness and diversity of ten economically important fish species. The underwater surveys were conducted from May to December 2015. During this eight- month period, surveys at each site were undertaken once every two months. Dives were conducted during the daylight hours. A total of 171 individuals from the targeted fish species were enumerated from the 349 still images and 220 minutes of video footage. Abundance was observed mainly in the semi-protected MPA (n=110) with only one fish species recorded with more than 2 individuals at protected MPA and unprotected sites. We observed a correlation between fish species richness and coral topographic complexity, with study sites at the semi-protected MPA having the most complex topography landscape, and accordingly recording the highest Shannon-Wiener index (H= 2.85). Higher abundance recorded at study sites in the unprotected sites and semi-protected MPA indicate that such areas could potentially become de facto MPAs. A long-term monitoring, assessment and evaluation of the multiple degrees of variables involved such as length-weight relationship, type of habitat, variation in depth, and species behaviour are recommended in order to understand better the relationship and dynamics between these variables.
    Matched MeSH terms: Body Weights and Measures
  16. Hazrol MD, Sapuan SM, Zainudin ES, Zuhri MYM, Abdul Wahab NI
    Polymers (Basel), 2021 Jan 12;13(2).
    PMID: 33445740 DOI: 10.3390/polym13020242
    The research included corn starch (CS) films using sorbitol (S), glycerol (G), and their combination (SG) as plasticizers at 30, 45, and 60 wt %, with a traditional solution casting technique. The introduction of plasticizer to CS film-forming solutions led to solving the fragility and brittleness of CS films. The increased concentration of plasticizers contributed to an improvement in film thickness, weight, and humidity. Conversely, plasticized films reduced their density and water absorption, with increasing plasticizer concentrations. The increase in the amount of the plasticizer from 30 to 60% showed a lower impact on the moisture content and water absorption of S-plasticized films. The S30-plasticized films also showed outstanding mechanical properties with 13.62 MPa and 495.97 MPa, for tensile stress and tensile modulus, respectively. Glycerol and-sorbitol/glycerol plasticizer (G and SG) films showed higher moisture content and water absorption relative to S-plasticized films. This study has shown that the amount and type of plasticizers significantly affect the appearances, physical, morphological, and mechanical properties of the corn starch biopolymer plastic.
    Matched MeSH terms: Body Weights and Measures
  17. Al-Mekhlafi MS, Surin J, Atiya AS, Ariffin WA, Mahdy AK, Abdullah HC
    PMID: 19058591
    A cross-sectional study was carried out to determine the current prevalence of protein-energy malnutrition (PEM) among Orang Asli schoolchildren and to investigate the potential predictors of malnutrition. A total of 241 (120 males and 121 females) Orang Asli schoolchildren age 7-12 years living in remote areas of Pos Betau, Pahang participated voluntarily in this study. Anthropometric and socioeconomic data were collected and the children were screened for intestinal parasitic infections. The overall prevalences of mild and significant underweight conditions were 52.3% and 37.3%, respectively, and the prevalences of mild stunting and wasting were 43.6% and 43.1%, respectively, while the prevalences of significant stunting and wasting were 43.6% and 5.6%, respectively. There was a significant association between gender (male) and malnutrition (p = 0.029). The results also showed a higher prevalence of stunting among children age < or = 10 years than in older children (p = 0.001). Other independent variables, including socioeconomic status and intestinal parasitic infections, had no significant associations with malnutrition indices. PEM is prevalent among schoolchildren in rural Malaysia and therefore of public health concern since PEM diminishes immune function and impairs cognitive function and educational performance. School-based programs of prevention through health education and interventions should be considered as an essential part of measures to improve the quality of life of schoolchildren in rural Malaysia.
    Matched MeSH terms: Body Weights and Measures/statistics & numerical data
  18. Bakr ZH, Wali Q, Ismail J, Elumalai NK, Uddin A, Jose R
    Data Brief, 2018 Jun;18:860-863.
    PMID: 29900250 DOI: 10.1016/j.dib.2018.03.110
    In this data article, we provide energy dispersive X-ray spectroscopy (EDX) spectra of the electrospun composite (SnO2-TiO2) nanowires with the elemental values measured in atomic and weight%. The linear sweep voltammetry data of composite and its component nanofibers are provided. The data collected in this article is directly related to our research article "Synergistic combination of electronic and electrical properties of SnO2 and TiO2 in a single SnO2-TiO2 composite nanowire for dye-sensitized solar cells" [1].
    Matched MeSH terms: Body Weights and Measures
  19. Herpandi, Huda, N., Rosma, A., Wan Nadiah W. A.
    MyJurnal
    Protein-rich by-products from the canning industry, especially dark flesh of skipjack, have limited uses due to several factors such as darken color, susceptibility to oxidation and off flavour. Protein hydrolysates from skipjack dark flesh was produced with different type of industrial proteases (Alcalase®2.4L FG, Protamex®, Neutrase®1.5MG and Flavourzyme®500MG) for 60, 120, 180 and 240 min with level of proteases used of 0.5, 1, 1.5 and 2% per weight of raw material. The degree of hydrolysis and free tryptophan content of hydrolysate were investigated. The results shows longer time with higher concentration of enzyme has increased the degree of hydrolysis. Alcalase®2.4L FG had the highest degree of hydrolysis among all proteases followed by Protamex®, Flavourzyme®500MG and Neutrase® 1.5MG. All enzymes increase free tryptophan content linearly with the increament of protease enzyme level. The longer the hydrolysis time, the higher the content of free tryptophan produced.
    Matched MeSH terms: Body Weights and Measures
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links