The rapid thermal cracking technology of biomass can convert biomass into bio-oil and is beneficial for industrial applications. Agricultural and forestry wastes are important parts of China's energy, and their high-grade utilization is useful to solve the problem of energy shortages and environmental pollution. To the best of our knowledge, the impact of nanocatalysts on converting biowastes for bio-oil has not been studied. Consequently, we examined the production of bio-oil by pyrolysis of Aesculus chinensis Bunge Seed (ACBS) using nanocatalysts (Fe2O3 and NiO catalysts) for the first time. The pyrolysis products of ACBS include 1-hydroxy-2-propanone (3.97%), acetic acid (5.42%), and furfural (0.66%). These chemical components can be recovered for use as chemical feedstock in the form of bio-oil, thus indicating the potential of ACBS as a feedstock to be converted by pyrolysis to produce value-added bio-oil. The Fe2O3 and NiO catalysts enhanced the pyrolysis process, which accelerated the precipitation of gaseous products. The pyrolysis rates of the samples gradually increased at DTGmax, effectively promoting the catalytic cracking of ACBS, which is beneficial to the development and utilization of ACBS to produce high valorization products. Combining ACBS and nanocatalysts can change the development direction of high valorization agricultural and forestry wastes in the future.
Pharmaceutically active compounds from medical plants are attractive as a major source for new drug development. Prenylated stilbenoids with increased lipophilicity are valuable secondary metabolites which possess a wide range of biological activities. So far, many prenylated stilbenoids have been isolated from Morus alba but the enzyme responsible for the crucial prenyl modification remains unknown. In the present study, a stilbenoid-specific prenyltransferase (PT), termed Morus alba oxyresveratrol geranyltransferase (MaOGT), was identified and functionally characterized in vitro. MaOGT recognized oxyresveratrol and geranyl diphosphate (GPP) as natural substrates, and catalyzed oxyresveratrol prenylation. Our results indicated that MaOGT shared common features with other aromatic PTs, e.g. multiple transmembrane regions, conserved functional domains and targeting to plant plastids. This distinct PT represents the first stilbenoid-specific PT accepting GPP as a natural prenyl donor, and could help identify additional functionally varied PTs in moraceous plants. Furthermore, MaOGT might be applied for high-efficiency and large-scale prenylation of oxyresveratrol to produce bioactive compounds for potential therapeutic applications.
Tumor necrosis factor-alpha (TNF) is a pleiotropic cytokine, which is thought to play a major role in the pathogenesis of inflammatory diseases, including allergy. TNF is produced at the early stage of allergen sensitization, and then continues to promote the inflammation cascade in the effector phase of allergic reactions. Consequently, anti-TNF treatment has been proposed as a potential therapeutic option. However, recent studies reveal anti-intuitive effects of TNF in the activation and proliferative expansion of immunosuppressive Tregs, tolerogenic DCs and MDSCs. This immunosuppressive effect of TNF is mediated by TNFR2, which is preferentially expressed by immunosuppressive cells. These findings redefine the role of TNF in allergic reaction, and suggest that targeting TNF-TNFR2 interaction itself may represent a novel strategy in the treatment of allergy.
Skin and soft tissue infections are major concerns with respect to wound repair. Recently, anti-bacterial wound dressings have been emerging as promising candidates to reduce infection, thus accelerating the wound healing process. This paper presents our work to develop and characterize poly(vinyl alcohol) (PVA)/chitosan (CS)/silk sericin (SS)/tetracycline (TCN) porous nanofibers, with diameters varying from 305 to 425 nm, both in vitro and in vivo for potential applications as wound dressings. The fabricated nanofibers possess a considerable capacity to take up water through swelling (~325-650%). Sericin addition leads to increased hydrophilicity and elongation at break while decreasing fiber diameter and mechanical strength. Moreover, fibroblasts (L929) cultured on the nanofibers with low sericin content (PVA/CS/1-2SS) displayed greater proliferation compared to those on nanofibers without sericin (PVA/CS). Nanofibers loaded with high sericin and tetracycline content significantly inhibited the growth of Escherichia coli and Staphylococcus aureus. In vivo examination revealed that PVA/CS/2SS-TCN nanofibers enhance wound healing, re-epithelialization, and collagen deposition compared to traditional gauze and nanofibers without sericin. The results of this study demonstrate that the PVA/CS/2SS-TCN nanofiber creates a promising alternative to traditional wound dressing materials.
Magnesium (Mg) alloys present great potential for the development of orthopedic implants, whereas, their high degradation rate and poor antibacterial performance have restricted orthopedic applications. In this work, PLLA/GO-AgNP (poly-L-lactic acid/graphene oxide- silver nanoparticle) with different concentration of GO-AgNPs were deposited on Mg alloy via electrospinning method for enhancement of corrosion resistance and antibacterial performance. The result revealed that incorporation of GO into PLLA fibrous considerably slowed down the degradation rate of Mg alloy substrate and reduced the H2 release rate from the substrate. Also, co-incorporation of GO and AgNPs into PLLA fibrous resulted in substantial escalate in compressive strength after immersion in simulated body fluid (SBF). Antibacterial activity test exhibited that Mg alloy and neat PLLA fibrous presented minimal inhibition area toward Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). In contrast, using PLLA/GO-AgNPs fibrous improved antibacterial performance against both bacteria. Cytocompatibility results indicated that PLLA/GO-AgNPs fibrous with a low amount of GO-AgNPs enhanced cell proliferation and growth while high co-incorporation of GO-AgNPs showed a negative effect on cell proliferation. Taken together, PLLA/1GO-AgNPs fibrous coating shows suitable corrosion resistance, cytocompatibility, and antibacterial function for use in orthopedic applications.
Due to the complexity of surgery for large-area bone injuries, implanting a large volume of materials into the injury site remains a big challenge in orthopedics. To solve this difficulty, in this study, a series of biomimetic hydroxyapatite/shape-memory composite scaffolds were designed and synthesized with programmable pore structures, based on poly(ε-caprolactone) (PCL), polytetrahydrofuran (PTMG) and the osteoconductive hydroxyapatite (HA). The obtained scaffolds presented various pore structures, high connectivity, tunable mechanical properties, and excellent shape memory performance. Moreover, the mineralization activity of the developed scaffolds could enhance the formation of hydroxyapatite and they showed good biocompatibility in vitro. The in vivo experiments show that scaffolds could promote the formation of new bone in critical size cranial defects. The programmable porous scaffold biomaterials exhibited potential application promise in bone regeneration.
Capilliposide B (CPS-B) and Capilliposide C (CPS-C), as the key components in Lysimachia capillipes Hemsl., increasingly aroused the interest and research concern of many researchers due to the good bioactivities. Nowadays, the reference standards of CPS-B and CPS-C yield were very limited. Due to the deficit of reference standards, the determination could be difficult to carry out, and the quality control and evaluation would be restrained afterwards. To solve this urgent problem, a quantitative analysis of multi-components by single-marker (QAMS) method was proposed and established based on high-performance liquid-chromatography tandem evaporative light-scattering detector. In this QAMS method, the content of the two bioactive components could be calculated by buddlejasaponin IV, which is applied as an external standard and readily obtained. And the methodological experiments were evaluated and indicated accuracy, stability and feasibility of this QAMS method. Therefore, in this study, this built method would properly meet the requirement of determination of CPS-B, CPS-C and quality control of the L. capillipes Hemsl. plant.
A novel interpenetrating network hydrogel for drug controlled release, composed of modified poly(aspartic acid) (KPAsp) and carboxymethyl chitosan (CMCTS), was prepared in aqueous system. The surface morphology and composition of hydrogels were characterized by SEM and FTIR. The swelling properties of KPAsp, KPAsp/CMCTS semi-IPN and KPAsp/CMCTS IPN hydrogels were investigated and the swelling dynamics of the hydrogels was analyzed based on the Fickian equation. The pH, temperature and salt sensitivities of hydrogels were further studied, and the prepared hydrogels showed extremely sensitive properties to pH, temperature, the ionic salts kinds and concentration. The results of controlled drug release behaviors of the hydrogels revealed that the introduction of IPN observably improved the drug release properties of hydrogels, the release rate of drug from hydrogels can be controlled by the structure of the hydrogels and pH value of the external environment, a relative large amount of drug released was preferred under simulated intestinal fluid. These results illustrated high potential of the KPAsp/CMCTS IPN hydrogels for application as drug carriers.
Waste cooking oil (WCO) is a hazardous waste generated at staggering values globally. WCO disposal into various ecosystems, including soil and water, could result in severe environmental consequences. On the other hand, mismanagement of this hazardous waste could also be translated into the loss of resources given its energy content. Hence, finding cost-effective and eco-friendly alternative pathways for simultaneous management and valorization of WCO, such as conversion into biodiesel, has been widely sought. Due to its low toxicity, high biodegradability, renewability, and the possibility of direct use in diesel engines, biodiesel is a promising alternative to mineral diesel. However, the conventional homogeneous or heterogeneous catalysts used in the biodiesel production process, i.e., transesterification, are generally toxic and derived from non-renewable resources. Therefore, to boost the sustainability features of the process, the development of catalysts derived from renewable waste-oriented resources is of significant importance. In light of the above, the present work aims to review and critically discuss the hazardous WCO application for bioenergy production. Moreover, various waste-oriented catalysts used to valorize this waste are presented and discussed.
Metal sulfides are promising anode materials for lithium ion batteries because of the high specific capacities and better electrochemical kinetics comparing to their oxide counterparts. In this paper, novel monocrystalline wurtzite ZnS@N-doped carbon (ZnS@N-C) nanoplates, whose morphology and phase are different from the common ZnS particles with cubic phase, are successfully synthesized. The ZnS@N-C nanoplates exhibit long cycle life with a high reversible specific capacity of 536.8 mAh · g-1after 500 cycles at a current density of 500 mA · g-1, which is superior to the pure ZnS nanoplates, illustrating the obvious effect of the N-doped carbon coating for mitigating volume change of the ZnS nanoplates and enhancing the electronic conductivity during charge/discharge processes. Furthermore, it is revealed that the ZnS single crystals with wurtzite phase in the ZnS@N-C nanoplates are transformed to the polycrystalline cubic phase ZnS after charge/discharge processes. In particular, the ZnS@N-C nanoplates are combined with the commercial LiNi0.6Co0.2Mn0.2O2cathode to fabricate a new type of LiNi0.6Co0.2Mn0.2O2/ZnS@N-C complete battery, which exhibits good cycling durability up to 120 cycles at a charge/discharge rate of 1 C after the prelithiation treatment on the ZnS@N-C anode, highlighting the potential of the ZnS@N-C nanoplates anode material applied in lithium ion battery.
The popularmedicinal mushroomGanodermalucidum was often cultivated by the natural-log. Generally the short log after cultivation were discarded and became pollutant. Rapid and less destructive method of analysis technical by Fourier Transform Infrared (FTIR) and Two-dimension Infrared (2DIR) correlation spectroscopy were selected to determine the composition changes of the logs after G.lucidum cultivation after first year to fifth year. The FTIR accumulated spectra formed without processed baseline showed the samples relied upon a sequenced increase of higher level than spectrum control Q (Q = Quercus acuttisima) from L + Q-5 (L = Lingzhi), L + Q-3, L + Q-1 to L + Q-2. The spectrum L + Q-4 has the optimum highest peak at box B, C and E from this lumped spectral view. The split spectra pinpointed on the fingerprint region of a sample begins from peak 1737 cm-1. ascribed C = O stretching vibration on acetyl and carboxyl hemicellulose group bonding gradually faded from L + Q-1 to L + Q-4 but appeared again on L + Q-5, possibly due to the degradation of hemicellulose. The absorption of peak around 1626 cm-1,1318 cm-1 and 781 cm-1 could be the characteristic absorption peak of calcium oxalate monohydrate. The correlation table indicated, most of the original structure of the building block of the wooden part was deteriorated and marked the lowest correlation value of the 4th year sample with control Q. The sudden changing pattern of 2nd derivative spectrum L + Q-3 to more flatten pattern spectrum L + Q-4 ascribed the changing contents of cellulose and hemicellulose included the lignin within one year during the G. lucidum cultivation. The 2DIR spectrum of the raw material sample precisely showed that the active site with red color was clustered with the area around 1800-1700 cm-1, 1450-800 cm-1 and 750-400 cm-1. In between, the range 1450-800 cm-1 was the most active cluster. Each of the sample showed the different sequence of autopeak comparison. This study has examined the impact of G. lucidum on the degradation of Q. acuttisima in term of their ecosystem life chain. The components of healthy Q. acuttisima wood including lignin, cellulose, hemicellulose and calcium oxalate monohydrate underwent changes after different years of G. lucidum cultivation.
Microplastics are among the major contaminations in terrestrial and marine environments worldwide. These persistent organic contaminants composed of tiny particles are of concern due to their potential hazards to ecosystem and human health. Microplastics accumulates in the ocean and in terrestrial ecosystems, exerting effects on living organisms including microbiomes, fish and plants. While the accumulation and fate of microplastics in marine ecosystems is thoroughly studied, the distribution and biological effects in terrestrial soil call for more research. Here, we review the sources of microplastics and its effects on soil physical and chemical properties, including water holding capacity, bulk density, pH value as well as the potential effects to microorganisms and animals. In addition, we discuss the effects of microplastics in combination with other toxic environmental contaminants including heavy metals and antibiotics on plant growth and physiology, as well as human health and possible degradation and remediation methods. This reflect is an urgent need for monitoring projects that assess the toxicity of microplastics in soil and plants in various soil environments. The prospect of these future research activities should prioritize microplastics in agro-ecosystems, focusing on microbial degradation for remediation purposes of microplastics in the environment.
Persimmon (Diospyros kaki Thunb.) is widely cultivated in China. On October 15, 2019, about 10% of persimmon fruits showed fruit rot in the orchards of Guilin, Guangxi, China (24°45' N, 110°24' E), which could cause more than 15% of yield losses. The initial symptoms of fruit rot exhibited irregular brown to black spots (range from 2 to 4 cm in diameter), the areas surrounding the blackened spots would be soft and rotten, and three diseased fruit samples were collected from three orchards, respectively. Tissues (5×5 mm) were cut from infected margins, surface-disinfected in 75% ethanol for 10 s, 2% NaClO for 2 min, rinsed three times in sterilized distilled water, and incubated on potato dextrose agar (PDA) at 25°C under 12/12 h light/darkness for a week. Forty-one tissues yielded morphologically similar cultures, and three representative isolates LPG1-1, LPG1-2, and YSG-1 were selected from three samples for further study, respectively. Their colonies showed wavy edges, white surfaces, and dense aerial hyphae on PDA after two weeks. Conidia were fusiform, straight to slightly curved, and 4-septate; basal cells were conical, hyaline, thin, and verruculose with two or three long and hyaline apical appendages and one short apical appendage; three median cells of LPG1-1 with length 14.06 to 17.69 μm (n=100), and LPG1-2 with length 14.03 to 17.61 μm (n=100) were dark brown to olivaceous, while three median cells of YSG-1 with length 12.54 to 15.58 μm (n=100) were dark brown. The conidial sizes of LPG1-1, LPG1-2, and YSG-1 were 17.41 to 27.68 × 4.63 to 8.55 μm (n=100), 18.06 to 27.41 × 4.33 to 8.21 μm (n=100), and 16.58 to 27.73 × 4.99 to 8.39 μm (n=100), respectively. The morphological characteristics were consistent with Neopestalotiopsis spp. (Maharachchikumbura et al. 2012; Maharachchikumbura et al. 2014). Primer pairs ITS4/ITS5, BT2a/BT2b, and EF1-526F/EF-1567R were used to amplify internal transcribed spacer (ITS), beta-tubulin (TUB2), and translation elongation factor 1 alpha (TEF1-α), respectively (Shu et al., 2020). All DNA fragments were sequenced by Sangon Biotech Co., Ltd. (Shanghai, China). Sequences have been deposited in GenBank (ITS: OM349120 to OM349122, TUB2: OM688188 to OM688190, TEF1-α: OM688191 to OM688193). Based on BLASTn analysis of ITS, TUB2, and TEF1-α sequences, the LPG1-1 and LPG1-2 showed over 99% similarity to N. saprophytica, and YSG-1 showed over 99% similarity to N. ellipsospora. Phylogenetic analysis of the three isolates was performed with MEGA10 (version 10.0) based on sequences of ITS, TUB2, and TEF1-α using maximum parsimony analysis. The results revealed that LPG1-1 and LPG1-2 were clustered with N. saprophytica, and YSG-1 was clustered with N. ellipsospora. Pathogenicity tests of three isolates were conducted on 72 healthy persimmon fruits with and without wounds, and 9 fruits are for each treatment. The wound was made by a sterilized needle. Fruits were pre-processed with 75% ethanol for 10 s, 1% NaClO for 2 min and rinsed three times in sterile water. Conidial suspensions (10 µL, 106 conidia/mL in 0.1% sterile Tween 20) were inoculated on each site (4 sites/fruit). Control group was treated with 0.1% sterile Tween 20. All inoculated sites were covered with wet cotton. The inoculated fruits were placed in a plastic box to maintain humidity at 28℃. After 5 days, all wounded fruits showed fruit rot, whereas unwounded and control fruits remained asymptomatic, there were significant differences (P<0.05) in aggressiveness between N. saprophytica (average lesion diameter 13.1 mm) and N. ellipsospora (average lesion diameter 14.9 mm). Koch's postulates were fulfilled by re-isolating the causal agents from inoculated fruits. N. ellipsospora was previously reported as an endophyte in D. montana in southern India (Reddy et al. 2016). N. saprophytica could cause leaf spot of Erythropalum scandens and Magnolia sp., and fruit rot of Litsea rotundifolia in China and leaf spot of Elaeis guineensis in Malaysia (Yang et al. 2021, Ismail et al. 2017). To our knowledge, this is the first report of N. ellipsospora and N. saprophytica causing fruit rot on persimmon in the world. The results will provide a foundation for controlling fruit rot caused by pestalotioid fungi on persimmon.
Polyphenol oxidase (PPO) catalyzes the o-hydroxylation of monophenols and oxidation of o-diphenols to quinones. Although the effects of PPO on plant physiology were recently proposed, little has been done to explore the inherent molecular mechanisms. To explore the in vivo physiological functions of PPO, a model with decreased PPO expression and enzymatic activity was constructed on Clematis terniflora DC. using virus-induced gene silencing (VIGS) technology. Proteomics was performed to identify the differentially expressed proteins (DEPs) in the model (VC) and empty vector-carrying plants (VV) untreated or exposed to high levels of UV-B and dark (HUV-B+D). Following integration, it was concluded that the DEPs mainly functioned in photosynthesis, glycolysis, and redox in the PPO silence plants. Mapman analysis showed that the DEPs were mainly involved in light reaction and Calvin cycle in photosynthesis. Further analysis illustrated that the expression level of adenosine triphosphate (ATP) synthase, the content of chlorophyll, and the photosynthesis rate were increased in VC plants compared to VV plants pre- and post HUV-B+D. These results indicate that the silence of PPO elevated the plant photosynthesis by activating the glycolysis process, regulating Calvin cycle and providing ATP for energy metabolism. This study provides a prospective approach for increasing crop yield in agricultural production.
Industrialization and overpopulation have polluted aquatic environments with significant impacts on human health and wildlife. The main pollutants in urban sewage are nitrogen, phosphorus, heavy metals and organic pollutants, which need to be treated with sewage, and the use of aquatic plants to purify wastewater has high efficiency and low cost. However, the effectiveness and efficiency of phytoremediation are also affected by temperature, pH, microorganisms and other factors. The use of biochar can reduce the cost of wastewater purification, and the combination of biochar and nanotechnology can improve the efficiency of wastewater purification. Some aquatic plants can enrich pollutants in wastewater, so it can be considered to plant these aquatic plants in constructed wetlands to achieve the effect of purifying wastewater. Biochar treatment technology can purify wastewater with high efficiency and low cost, and can be further applied to constructed wetlands. In this paper, the latest research progress of various pollutants in wastewater purification by aquatic plants is reviewed, and the efficient treatment technology of wastewater by biochar is discussed. It provides theoretical basis for phytoremediation of urban sewage pollution in the future.
In response to the growing concern for environmental pollution, two lanthanide compounds {[Ln(L)(H2O)]·4H2O}n (where Ln = Tb and Gd, H3L = 1-amino-2,4,6-benzene tricarboxylic acid) were synthesized using a -NH2 modified ligand and systematically characterized. Both compounds exhibit remarkable fluorescence response, adsorption of CrO42- ions, and photocatalytic degradation properties, as well as exceptional acid-base and thermal stability. Remarkably, the pH-dependent 1-Tb exhibits exceptional performance as a fluorescent probe for detecting Fe3+ and CrO42-/Cr2O72- ions in aqueous solutions, while also serving as a ratiometric fluorescent probe for the detection of Cr3+, offering rapid response, high sensitivity, selectivity, and recoverability advantages in application. Moreover, 1-Tb exhibits excellent detection capabilities and displays effective adsorption of CrO42- ions, with a maximum adsorption capacity of 230.71 mg/g. On the other hand, 1-Gd exhibits superior performance compared to 1-Tb in the photocatalytic degradation of antibiotics. The degradation mechanism is further elucidated by conducting experiments with DFT theoretical calculations.
As the economy evolves and markets change after Covid-19, demand and competition in the labor market increase in China, and employees become increasingly concerned about their career opportunities, pay, and organizational commitment. This category of factors is often considered a key predictor of turnover intentions and job satisfaction, and it is important that companies and management have a good understanding of the factors that contribute to job satisfaction and turnover intentions. The purpose of this study was to investigate the factors that influence employees' job satisfaction and turnover intention and to examine the moderating role of employees' job autonomy. This cross-sectional study aimed to quantitatively assess the influence of perceived career development opportunity, perceived pay for performance, and affective organisational commitment on job satisfaction and turnover intention, as well as the moderating effect of job autonomy. An online survey, which involved 532 young workforce in China, was conducted. All data were subjected to partial least squares-structural equation modelling (PLS-SEM). The obtained results demonstrated the direct influence of perceived career development, perceived pay for performance, and affective organisational commitment on turnover intention. These three constructs were also found to have indirect influence on turnover intention through job satisfaction. Meanwhile, the moderating effect of job autonomy on the hypothesised relationships was not statistically significant. This study presented significant theoretical contributions on turnover intention in relation to the unique attributes of young workforce. The obtained findings may also benefit managers in their efforts of understanding the turnover intention of the workforce and promoting empowerment practices.
This work has aimed to investigate the consumers' green product purchase attitudes and behavioral intention during COVID-19 pandemic. Data was collected through a survey method of 503 consumers in Malaysia. Data were analyzed using the partial least square method. The findings revealed that fear of COVID-19 pandemic has a significant impact on green product behavioral intention. Green product literacy, green product orientation, and social influence have a significant influence on green product purchase attitudes. The results also indicated that consumers' green product purchase attitudes mediate the effect of green product literacy, green product orientation, and social influence on behavioral intention. The findings of this work will provide strategically relevant references to green marketers and retail managers in the understanding of consumers' green product purchase attitudes and green product behavioral intention during the ongoing uncertainty of the COVID-19 pandemic.
Styphnolobium japonicum (L.) Schott (family Fabaceae Juss.) also called pagoda tree, is widely planted in northern China in landscape plantings, for erosion control and forestry. In recent years, symptoms of branch dieback were observed on S. japonicum in the southern part of Xinjiang province, China. From 2019 to 2022, in total ca. 1000 ha area was surveyed in Korla (41.68°N, 86.06°E), Bohu (41.95°N, 86.53°E) and Alaer (41.15°N, 80.29°E). Typical symptoms were observed in 70% of the surveyed branches. To identify the cause, we collected 50 symptomatic branches. Symptoms were initially observed on green current-year twigs, which turned grayish white in color. In the later stages of disease development, a large number of nacked black conidia formed under epidermis of perennial branches, causing visible black protrusions (pycnidia) on branch surface. The disease occurred throughout the entire growing season of S. japonicum. Symptoms also occurred on the inflorescence, fruit, and twigs. In some cases, infection resulted in tree mortality. Isolations were made from the margin between healthy and diseased tissues. Small pieces were excised, surface disinfested (75% ethanol 30 s, 1% NaClO solution 5 mins), cut into pieces (5 to 10 mm2), and incubated on PDA medium at 28℃ for 3 days. A total of 16 isolates (GH01-GH16) with similar colony morphology were obtained. The colonies were initially white, gradually turning to olive-green on the surface and black on the underside after 7 days. Microscopically, the conidia were aseptate, 1-septate, two-septate, and muriform, 2.6-4.5 × 2.9-27.6 μm (n=50). Pycnidia ranged in size from 120.2 to 135.5 × 112.4 to 118.6 µm (n=20). Those morphological characters matched the descriptions of Neoscytalidium dimidiatum (previously N. novaehollandiae) (Alizadeh et al. 2022; Pavlic et al. 2008). For molecular identification, genomic DNA of GH01-GH16 were extracted from fresh mycelia. The internal transcribed spacer (ITS), large subunit ribosomal RNA gene (LSU), and translation elongation factor 1-alpha (EF1-α) gene were amplified using the primer sets ITS1/ITS4 (White 1990), LRoR/LR5 (Vilgalys and Hester 1990) and EF1-728F/EF1-986R (Carbone and Kohn 1999). The sequences were deposited in GenBank (accession No. OP379832, OQ096643-OQ096657 for ITS, OP389048, OQ127403-OQ127417 for LSU, and OQ136617, OQ586044-OQ586058 for EF1-α). The ITS sequence had 100% identity (505/505 bp) to MT362600. Similarly, the LSU and EF1-α sequences were found to be identical to MW883823 (100%, 821/821 bp) and KX464763(99%, 256/258 bp), respectively. Pathogenicity was tested on one-year-old healthy S. japonicum seedlings. Spores of representative isolate GH01 were produced on PDA by incubating for 7-days at 28℃. Conidia were washed with sterile water. Five trees were inoculated with 1 × 106 conidia/ml conidial suspensions and five trees were sprayed with sterile water. All trees were covered with plastic bags for 24 h and kept at 25°C in a greenhouse. Signs and symptoms were similar to those observed in field collections one month after inoculation, while no symptoms occurred on the controls. The original fungus was successfully reisolated from the inoculated trees and was identified as N. dimidiatum following the methods described above. N. dimidiatum has been reported in many Asian country such as Malaysia, India, Turkey, and Iran(Akgül et al. 2019; Alizadeh et al. 2022; Khoo et al. 2023; Salunkhe et al. 2023). To our knowledge, this is the first report of N. dimidiatum associated with branch dieback of S. japonicum in China. Our findings have expanded the host range of N. dimidiatum in China and provides a theoretical basis for the diagnosis and treatment of the disease.
The rapid growth of population and economy has led to an increase in urban air pollutants, greenhouse gases, energy shortages, environmental degradation, and species extinction, all of which affect ecosystems, biodiversity, and human health. Atmospheric pollution sources are divided into direct and indirect pollutants. Through analysis of the sources of pollutants, the self-functioning of different plants can be utilized to purify the air quality more effectively. Here, we explore the absorption of greenhouse gases and particulate matter in cities as well as the reduction of urban temperatures by plants based on international scientific literature on plant air pollution mitigation, according to the adsorption, dust retention, and transpiration functions of plants. At the same time, it can also reduce the occurrence of extreme weather. It is necessary to select suitable tree species for planting according to different plant functions and environmental needs. In the context of tight urban land use, the combination of vertical greening and urban architecture, through the rational use of plants, has comprehensively addressed urban air pollution. In the future, in urban construction, attention should be paid to the use of heavy plants and the protection and development of green spaces. Our review provides necessary references for future urban planning and research.