Displaying publications 21 - 40 of 173 in total

Abstract:
Sort:
  1. Babji, A.S., Ghassem, M., Hong, P.K., Maizatul, S.M.S.
    ASM Science Journal, 2012;6(2):144-147.
    MyJurnal
    Research and development trends will continue to design innovative composite foods in which muscle proteins are combined with non-conventional animal products, non-meat proteins and functional food additives, many of which have lost their original inherent properties and characteristics. Composite food are products with meat, non-meat proteins, fats, carbohydrates and functional ingredients such as pre-emulsion, probiotics, enzymes, bioactives, peptides, hormones, emulsifiers, gelatin, animal fats/oils, alcohol and visceral tissues. Traceability of halal meat raw materials should start at the point of animal breeding, production to the stage of halal slaughter, processing operations and final point of consumption. Traceability of food additives used in the food industry remains a major hurdle for the Muslim community seeking halal food. The processes and technological advancements made in raw material processing, ingredient extractions, modifications, purification and resynthesized into many food ingredients make the question of traceability and solving of the materials and processes that are halal a monumental task. Food is only halal if the entire food chain from farm to table, is processed, handled and stored in accordance with the syariah and/or halal standards or guidelines, such as in the Jabatan Kemajuan Islam Malaysia (JAKIM): General guidelines, Malaysia Standards MS 1500:2009 and Codex Alimentarius (Food Labeling). Here lies the challenge and importance of traceability to verify the ‘wholesomeness’ of the sources of halal raw materials and final meat-based food products.
  2. Mohd Armi, A.S., Afiza, A.S., Mohd Ramzi, A.
    ASM Science Journal, 2012;6(2):149-151.
    MyJurnal
    Over the last century, the earth’s climate has changed. It is a serious global, long-term problem which involves complex interactions. A lot of evidence suggests that most of the observed factors contributing to the crisis over the last 50 years can be attributed to human activities. Malaysia has always been vulnerable to extreme climatic events such as typhoons, floods and drought. We expect climate change to exacerbate these vulnerabilities. To ensure, that our water resources will always be secure and ready for use. We need to create awareness in the public and the policy makers so that they will acknowledge that the climate change issue is real. They also need to accept that actions to adapt with our vulnerabilities should be immediately put in place. We can do this by integrating the various sector policies and securing the participation of all stakeholders in Malaysia and other countries.
  3. Nor Aziah, B., Fatiha, I.
    ASM Science Journal, 2013;7(1):1-6.
    MyJurnal
    Transition metals play an important role in the growth of carbon nanotubes (CNTs). Series of unsupported hybrid catalysts consisting of Ni:Cu, Ni:Cr, and Ni:Mn doped with Nd catalyst, respectively were synthesized by impregnation method. The catalytic performance of the catalyst for the production of CNTs was measured in the pyrolysis process of hydrocarbon source by catalytic chemical vapour deposition method. Acetylene gas was used as the source of carbon in the pyrolysis process. The decomposition of acetylene was carried out at 700ºC. The bulk properties of the catalysts were investigated by X-ray diffraction. Field emission scanning electron microscopy and thermal analysis were used to observe the morphology and thermal stability of the as-synthesized CNTs, respectively. Hybrid catalyst of Ni:Mn/Nd and Ni:Cr/Nd in 3:1 atomic ratio gave high percentage of carbon yield which was assigned for the high production of CNTs with the mass of yield 18 times greater than the initial mass of the catalyst used.
  4. Mazlina, M.K., Che Su, M.S.
    ASM Science Journal, 2012;6(1):31-37.
    MyJurnal
    A 'green tyre' concept has the advantage of low rolling resistance, improved wet grip and enhanced handling. It has been reported that 3% decrease in rolling resistance is equivalent to 1% fuel saving, thus giving the 'green tyre' economic benefits and customer satisfaction. In this study, epoxidised natural rubber (ENR) compounds containing various loading of silica filler were prepared. The processibility and viscoelastic properties were investigated using the rubber processing analyser and Mooney viscometer. Results showed that the properties were adversely affected by the poor dispersion of silica as supported by the bound rubber measurement. In addition, a reversion in the cure behaviour was also observed as the curing temperature was increased to 170ºC.
  5. Reza, F., Begum, T., Ahmed, A.L., Omar, H., Muzaimi, M., Abdullah, J.M.
    ASM Science Journal, 2012;6(1):39-45.
    MyJurnal
    The human brain generates different oscillations at different frequencies during various consciousness levels. When these brain waves synchronize with exogenous rhythmic stimulation, the brain experiences strong, yet relaxing emotion that could be involved in the formation of memory. We investigated the character of rhythmic oscillatory dynamics by electroencephalography (EEG) of subjects listening to a short verse of the Holy Quran compared to resting and Arabic news listening. The mean power amplitudes of each frequency band for wavelet-based time-frequency analysis were obtained from 5000 ms of segmented EEG recordings during rest, news and Quran listening conditions. The time series analysis of power from each of three conditions in each frequency band from the grand averaged data was then subjected to autocorrelation study. The results showed significant cyclic overall trends of increasing and decreasing patterns of power in the low frequency brain wave oscillation of different head regions especially global, frontal and temporal sites. These results provided a basis for prediction of the periodicity of the power of the oscillatory brain dynamics of delta and robustly in theta regions which occurred during Quran listening. Despite several limitations, our data offered a plausible scientific basis to the emotional induction during Quran listening that mimics recognized as data from music listening studies. This offered a promising perspective for future studies in translational neurophysiological, cognitive and biofeedback on Quran listening to modify brain behaviour in health and disease.
  6. Bong, C.H.J., Mah, D.Y.S, Putuhena, F.J., Said, S., Bustami, R.A.
    ASM Science Journal, 2012;6(1):47-60.
    MyJurnal
    Hydraulics simulation can be used as a supporting tool for planning and developing a framework, such as Integrated Flood Management for river management. To demonstrate this, a hydraulics model for the Sarawak River Basin was run using InfoWorks RS software by Wallingford Software, UK. InfoWorks River Simulation (RS) was chosen because its applicability has been proven and widely used to model Malaysian rivers. The extraction of computed floodwater level and flood maps for different time intervals would produce the rate of floodplain submergence from river bank level. This information could be incorporated into a logical framework to support decisions on flood management measures. Thus, hydraulics models can be used as tools to provide the necessary decision parameters for developing logical frameworks which would act as to guide the planning when it involved various stakeholders’ participation.
  7. Islam, M.R., Muthuraju, S., Tarmizi, C.H., Zulkifli, M.M., Osman, H., Mohamad, H., et al.
    ASM Science Journal, 2012;6(2):95-102.
    MyJurnal
    Epilepsy is a neurological disorder characterized by recurrent seizures resulting from excessive abnormal electrical discharges in the brain. Medicinal plants may play an invaluable role to discover the new antiepileptic drugs. The aim of the present study was to investigate the anticonvulsant activity of α-terpineol isolated from Myristica fragrans Hountt. The α-terpineol showed a significant inhibition of the seizure episodes and spikes in absence seizures model of Genetic Absence Epilepsy Rats from Strasbourg (GAERS) rats by using electroencephalography records. It showed dose-dependent anticonvulsant activity that was comparable to the known antiepileptic drug of diazepam. It showed a rapid onset and relatively short duration of anticonvulsant effects. The present findings suggest that α-terpineol might possess antiepileptic activities against the partial seizures of human because it prevented seizures in well-established genetic absence seizure animal model of GAERS rats.
  8. Sugandi, G., Majlis, B.Y.
    ASM Science Journal, 2012;6(2):122-127.
    MyJurnal
    Since its invention, polyimide (PI) has been widely used in micro-electro-mechanical system (MEMS) devices. For fabrication, the PI membrane, PI-2723 HD-Microsystems was used as the membrane material due to its Young's modulus of 2.7 GPa and its film thickness could easily be controlled by changing the speed of the spin coater system. The application PI as membrane structure on silicon wafers therefore gave a much better mechanical performance then conventional membranes made of silicon dioxide (SiO2) or silicon nitride (Si3N4) layers. The fabrication of PI membrane was the same as for SiO2 and Si3N4 membranes; the basic step was to etch a side of the silicon wafer using wet anisotropic etching. This paper proposes an effective process for fabrication of PI membrane with f ast and little supervision. In this process, a dual step process was wet anisotropic etching of single crystal silicon using pottasium hydroxyl (KOH) with different concentrations and temperature processes. For the first process, 45% KOH under boiling temperature was used to etch at least 90%–95% of the silicon. In the second process, the silicon was submerged in 45% KOH with temperature at 70ºC–80ºC to etch away the residual silicon until a clean and transparent PI membrane was achieved. Using this method, the fabrication of PI membrane could be generated fast.
  9. A. Tang, S.K. Wong, O.H. Ahmed, N.M. Majid
    ASM Science Journal, 2013;7(1):23-26.
    MyJurnal
    Widespread deforestation has resulted in soil degradation that is often linked to environmental and ecological changes. Rehabilitation of degraded forest is essential to prevent further degradation of the soil. Abundance of soil microbiota could serve as an essential biological indicator of soil health for rehabilitation success. An investigation was conducted to study the relationship between cellulolytic, nitrogen-fixing and phosphate-solubilizing microbial counts and age of rehabilitated forest. A random sampling design was used to obtain four replicates of five composite soil of 0–10 cm depth soil samples of 4, 9, 14 and 19-year-old rehabilitated forest. Three selective media: Congo red cellulose, nitrogen-free malate and calcium phosphate media were used for the enumerations of cellulolytic, nitrogen-fixing and phosphate-solubilizing microbes, respectively. Cellulolytic and phosphate-solubilizing microbes were counted based on the formation of clearing zones, while nitrogen-fixing microbes were based on the formation of blue halo on the respective media. There was positive linear relationship between age of the rehabilitated forest and microbial count. These findings revealed that the potentials of cellulolytic, nitrogen-fixing and phosphate-solubilizing microbial populations could be used as biological indicators of forest soil rehabilitation.
  10. N. Sulaiman, B. Y. Majlis
    ASM Science Journal, 2013;7(1):27-36.
    MyJurnal
    Measurement of low magnetic field has played an important role in many electronics applications such as navigation, military, non-destructive test, traffic detection as well as medical diagnosis and treatment. The presence of magnetic field, particularly its strength and direction, can be measured using magnetometer. There are many types of magnetometers being investigated through the years and one of the prominent types is fluxgate magnetometer. The main components of fluxgate magnetometer consisting of driving coils, sensing coils and magnetic core are developed by MEMS silicon processing technology. In this paper, an investigation on physical characteristics of the three-dimensional coil structure for a micro-scaled fluxgate magnetometer is presented. The physical characteristics such as width of the coil, distance between successive coils, and gap between the top and bottom coils which would influence the magnetic energy in magnetometer is discussed. In this work, finite-element method simulations to investigate the physical characteristics of the sensing coils were carried out, where the parameter of interest is the coils’ inductance as well as the magnetic flux density. Based on the simulation results, the varying of physical characteristics of the coils had its effects particularly in coil inductance, magnetic flux density, and magnetic energy. It could also be seen that the simulated results agreed with the theoretical aspects of magnetism in a coil. From the investigations, suitable coil dimensions were proposed.
  11. M.A.M. Ishak, M.T. Safian, Z.A. Ghani, K. Ismail
    ASM Science Journal, 2013;7(1):7-17.
    MyJurnal
    Solvent flow reactor system was introduced into the extraction system to increase the system efficiency and enhance the extraction yield by adding fresh solvent during the extraction processes. The liquefaction experiment was carried out at various flow-rates (1, 3 and 5 ml/min), reaction times (30, 45 and 60 min) and reaction temperatures (300ºC, 350ºC, 400ºC, 420ºC and 450ºC) with tetralin as solvent. Despite the ability of adding fresh solvent into the extraction process, the conversion of oil+gas was still considered to be low as there was ~25% of coal extracts left to be converted into low molecular weight compounds. One possible option to increase the oil yield is by applying catalyst that will further break up the coal extracts into small molecular weight compounds. In this study, a second reactor was introduced consisting of catalyst (NiSiO2) assuming that the catalyst would interact more effectively with coal extracts rather than the coal itself. In the
    absence of catalyst, the oil yield was 55%. By introducing the Ni catalyst, the oil yield increased by 15%. Further analysis of GCMS showed that the oil from catalytic liquefaction gave out more low molecular weight compounds in comparison to the un-catalytic liquefaction oil.
  12. R. Abd-Shukor, W.Y. Lim
    ASM Science Journal, 2013;7(1):18-22.
    MyJurnal
    The electron-phonon coupling constant of the copper oxide-based high temperature superconductors in the van Hove scenario was calculated using three known models and by employing various acoustic data. Three expressions for the transition temperature from the models were used to calculate the constants. All three models assumed a logarithmic singularity in the density of states near the Fermi surface. The calculated electron-phonon coupling constant ranged from 0.06 to 0.28. The constants increased with the transition temperature indicating a strong correlation between electron-phonon coupling and superconductivity in these materials. These values were smaller than the values estimated for the conventional three-dimensional BCS theory. The results were compared with previous reports on direct measurements of electron-phonon coupling constants in the copper oxide based superconductors.
  13. Low, C.Y., Hii, S.L., Leong, L.K., Yim, Y.Y., Tan, H.W.
    ASM Science Journal, 2012;6(1):61-66.
    MyJurnal
    Cassava starch was used as feedstock for production of bioethanol by Saccharomyces cerevisiae. The cassava starch was hydrolyzed using commercial α-amylase and glucoamylase enzymes followed by a batch ethanol fermentation process using saccharified starch slurry. By using 110 g/L of reducing sugar from saccharified starch slurry, the ethanol yield was promising with maximum ethanol concentration of 20.6 g/L recorded after 55 hours of cultivation process. Three different models - the Logistic model, Luedeking-Piret-like equation and Gompertz equation - were used to characterize and explain the cell growth, reducing sugar consumption and production formation, respectively. The kinetic parameters were estimated by fitting the experimental data to the proposed models using non-linear regression analysis. The correlation coefficient r2 values for the Logistic model, Luedeking-Piret-like equation and the Gompertz equation were 0.994, 0.996 and 0.990, respectively. The high correlation coefficient values indicate that the proposed models were able to describe the ethanol fermentation process.
  14. Abraham, Martin
    ASM Science Journal, 2012;6(1):67-70.
    MyJurnal
    The pursuit, initiation and establishment of multi-stakeholder partnerships, including with the private sector, is often a critical component of attaining and achieving the success and sustainability of many projects the world over. However, the soliciting and securing of socially, economically and environmentally constructive engagements between the private sector on the one hand, and the NGOs, CBOs and local communities on the other hand, is in reality much easier said than done. Notably, since most private sector corporations undoubtedly tend to leave behind various "ecological footprints", differing only in their size and depth, stemming from their respective forms and functions, and their ensuing impacts and implications. The interplay between the civil society and the private sector, especially for resource mobilization. (Copied from article).
  15. Salleh, R.M., Djauhari, M.A.
    ASM Science Journal, 2012;6(1):1-13.
    MyJurnal
    A monitoring procedure was introduced for process variability in a multivariate setting based on individual observations which was a combination of (i) robust high breakdown point approach in the set-up stage to determine the reference sample and (ii) the use of Wilks chart in the mass production stage. This setting is what the Malaysian manufacturing industry is currently lacking in, especially when a robust approach must be used. The advantage of this procedure was revealed by using the case of a female shrouded connector production process in a Malaysian industry. Moreover, this procedure could also be used in any process quality monitoring and for any industry. A recommendation for quality practitioners was also addressed.
  16. Devaraj, V., Zairossani, M.N.
    ASM Science Journal, 2012;6(1):15-21.
    MyJurnal
    Malaysia is the world’s top manufacturer of examination and surgical natural rubber (NR) gloves, exported mainly to the USA and Europe. The glove manufacturing process yields effluent which must be treated to comply with the stringent regulatory requirements imposed by the Malaysian Department of Environment. To make glove manufacturing an eco-friendly process, efforts are geared towards minimizing and utilizing waste or converting it into raw material for making value-added products. Waste generated from the glove industry is mainly rubber sludge which is obtained from the chemical flocculation stage of the effluent treatment process and consists of mainly rubber, remnants of compounding ingredients and water. R&D work by the Malaysian Rubber Board on waste utilization and resource recovery investigations have revealed many uses for this sludge. This paper briefly outlines only one of the many options available, which is the conversion of the sludge into sludge derived fuel (SDF). Preliminary study has identified three formulations of SDF with calorific values (CV) exceeding 16 000 kJ/kg, matching a good grade coal. This was considered as promising results which warrant explorative work for further increasing the CV of SDF to turn it into a viable fuel substitute in the latex products manufacturing industry and subsequently apply for a Clean Development Mechanism status to generate income.
  17. Abdul-Kadir, M.A., Ariffin, J.
    ASM Science Journal, 2012;6(2):128-137.
    MyJurnal
    This paper reviews the advances made on studies related to bank erosion. Bank erosion has been an area of interest by researchers in geological, geotechnical, hydraulic, hydrology and river engineering disciplines. With anticipated global challenges from climate change impacts, bank erosion studies could support challenges faced in ensuring sustainable environmental management. The evolution in the theoretical and laboratory findings have led to the advances in bank erosion and contributed to new knowledge in the said field. This review summarises the findings of previous investigators including measurements approach and prediction of rates of bank erosion through the use of physical models and numerical approach.
  18. Monajemia, H., Daud, M.N., Zain, S.M., Wan Abdullah, W.A.T.
    ASM Science Journal, 2012;6(2):138-143.
    MyJurnal
    Finding a proper transition structure for the peptide bond formation process can lead to a better understanding of the role of the ribosome in catalyzing this reaction. A potential energy surface scan was performed on the ester bond dissociation of the P-site aminoacyl-tRNA and the peptide bond formation of P-site and A-site amino acids. The full fragment of initiator tRNAi met attached to both cognate (met) and non-cognate (ala) amino acids as the P-site substrate and the methionine as the A-site amino acid was used in this study. Due to the large size of tRNA, ONIOM calculations were used to reduce the computational cost. This study illustrated that the rate of peptide bond formation was reduced for misacylated tRNA without the presence of ribosomal bases. This demonstrated that there were indeed specific structural interactions involving the amino acid side chain within the tRNAi met.
  19. Ahmad, Z., Rohana, H., Md Tahir, P.
    ASM Science Journal, 2013;7(1):37-58.
    MyJurnal
    This study investigated the thermal properties of three room temperature curing adhesives containing nano particles which were thixotropic and shear thinning which allowed injection into overhead holes when exposed to different environmental conditions. Viscosity and shear stress of the adhesives were measured as a function of shear rate. The thermal behaviour of the adhesives were measured using dynamic mechanical thermal anylisis following exposures to different temperatures and humidities which included temperatures of 20 degrees Celcius, 30 degrees Celcius and 50 degrees Celcius, relative humidities of 65% RH, 75% RH 95% RH soaked in water at 20 degrees Celcius and placed in the oven at 50 degrees Celcius. The dynamic thermal properties reported include storage and loss modulus, the loss tangent and the glass transition temperature ( Tg ). For nano- and micro-particles filled adhesives, the Tg increased with the temperature increase, even though the adhesives was subjected to high humidity and this was due to further cross-linking. The results showed that room temperature cured epoxies were only partially cured at room temperature.
  20. Kandasamy, R., Azme, Hashim, I., Ismoen, M.
    ASM Science Journal, 2008;2(1):23-33.
    MyJurnal
    The effect of chemical reaction and variable viscosity on mixed convection heat and mass transfer for Hiemenz flow over a porous wedge plate was studied in the presence of heat radiation. The wall of the wedge was embedded in a uniform Darcian porous medium to allow for possible fluid wall suction or injection and had a power-law variation of both the wall temperature and concentration. The fluid was assumed to be viscous and incompressible. Numerical calculations were carried out for different values of dimensionless parameters and an analysis of the results obtained showed that the flow field was influenced appreciably by the buoyancy ratio between species, thermal diffusion and suction/injection at wall surface. The effects of these major parameters on the transport behaviours were investigated methodically and typical results illustrated to reveal the tendency of the solutions. Representative results are presented for the velocity, temperature, and concentration distributions. Comparisons with previously published works were performed and excellent agreement between the results were obtained. It is predicted that this research might prove to be useful for study of the movement of oil or gas and water through the reservoir of an oil or gas field, in the migration of underground water, in filtration, and water purification processes.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links