MyMedR

Displaying publications 21 - 40 of 54 in total

Abstract:

Sort:

Thermal sintering: a novel technique used in the design, optimization and biopharmaceutical evaluation of propranolol HCl gastric floating tablets

Venkata Srikanth M, Songa AS, Nali SR, Battu JR, Kolapalli VR

Drug Dev Ind Pharm, 2014 Jan;40(1):33-45.
PMID: 23317339 DOI: 10.3109/03639045.2012.744416

The objective of the present investigation was to study the applicability of thermal sintering technique for the development of gastric floating tablets of propranolol HCl. Formulations were prepared using four independent variables, namely (i) polymer quantity, (ii) sodium bicarbonate concentration, (iii) sintering temperature and (iv) sintering time. Floating lag time and t95 were taken as dependent variables. Tablets were prepared by the direct compression method and were evaluated for physicochemical properties, in vitro buoyancy and dissolution studies. From the drug release studies, it was observed that drug retarding property mainly depends upon the sintering temperature and time of exposure. The statistically optimized formulation (PTSso) was characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry studies, and no significant chemical interaction between drug and polymer was observed. Optimized formulation was stable at accelerated conditions for a period of six months. PTSso was evaluated for in vivo buoyancy studies in humans for both fed and fasted states and found that gastric residence time of the floating tablets were enhanced by fed stage but not in fasted state. Optimized formulation PTSso and commercial formulation Ciplar LA 80 were subjected to bioavailability studies in healthy human volunteers by estimating pharmacokinetic parameters such as Cmax, Tmax, area under curve (AUC), elimination rate constant (Kel), biological half-life (t1/2) and mean residence time (MRT). There was a significant increase in the bioavailability of the propranolol HCl from PTSso formulation, which was evident from increased AUC levels and larger MRT values than Ciplar LA 80.
Effect of polymer, plasticizer and filler on orally disintegrating film

Liew KB, Tan YT, Peh KK

Drug Dev Ind Pharm, 2014 Jan;40(1):110-9.
PMID: 23311593 DOI: 10.3109/03639045.2012.749889

Difficulty in swallowing tablets or capsules has been identified as one of the contributing factors to non-compliance of geriatric patients. Although orally disintegrating tablet was designed for fast disintegration in mouth, the fear of taking solid tablets and the risk of choking for certain patient populations still exist.
Assessment of antibiofilm activity of magnesium fluoride nanoparticles-stabilized oil-in-water nanosized emulsion

Shunmugaperumal T, Ramamurthy S

Drug Dev Ind Pharm, 2012 Mar 12.
PMID: 22409156 DOI: 10.3109/03639045.2012.665459

Magnesium fluoride (MgF(2)) nanoparticles-stabilized oil-in-water nanosized emulsion was prepared and assessed for its antiadherent and antibiofilm activities over glass coupons against pathogenic microorganisms like Escherichia coli and Staphylococcus aureus.
Sustained-release alginate-chitosan pellets prepared by melt pelletization technique

Wong TW, Nurulaini H

Drug Dev Ind Pharm, 2012 Dec;38(12):1417-27.
PMID: 22309449 DOI: 10.3109/03639045.2011.653364

Alginate-chitosan pellets prepared by extrusion-spheronization technique exhibited fast drug dissolution.
Influence of acetazolamide loading on the (in vitro) performances of non-phospholipid-based cationic nanosized emulsion in comparison with phospholipid-based anionic and neutral-charged nanosized emulsions

Tamilvanan S, Kumar BA

Drug Dev Ind Pharm, 2011 Sep;37(9):1003-15.
PMID: 21417616 DOI: 10.3109/03639045.2011.555407

Acetazolamide (ACZM)-loaded anionic, cationic, and neutral-charged oil-in-water nanosized emulsions were prepared and compared with their mean droplet diameter, surface charge, entrapment efficiency, freeze-thaw cycling stability, in vitro drug release, and transcorneal permeation.
In vitro and in vivo evaluation of hydrophilic and hydrophobic polymers-based nicorandil-loaded peroral tablet compared with its once-daily commercial sustained-release tablet

Tamilvanan S, Venkatesh Babu R, Nappinai A, Sivaramakrishnan G

Drug Dev Ind Pharm, 2011 Apr;37(4):436-45.
PMID: 20923389 DOI: 10.3109/03639045.2010.521161

Hydrophilic and hydrophobic polymer-based nicorandil (10 mg)-loaded peroral tablets were prepared using the wet granulation technique. The influence of varying amounts of hydroxypropyl methylcellulose (HPMC) (30-50 mg), ethylcellulose (2-4 mg), microcrystalline cellulose (5-20 mg) and Aerosil® (5-12 mg) in conjunction with the constant amounts (3 mg) of glidant and lubricant (magnesium stearate and talc) on the in vitro performances of the tablets (hardness, friability, weight variation, thickness uniformity, drug content, and drug release behavior) were investigated.
Detrimental consequences of the paracetamol tablet elastic relaxation during ejection

Anuar MS, Briscoe BJ

Drug Dev Ind Pharm, 2010 Aug;36(8):972-9.
PMID: 20515396 DOI: 10.3109/03639041003610807

It is generally accepted that the tablet elastic relaxation during compaction plays a vital role in undermining the final tablet mechanical integrity. One of the least investigated stages of the compaction process is the ejection stage.
Effects of microwave on drug-release responses of spray-dried alginate microspheres

Mardziah RE, Wong TW

Drug Dev Ind Pharm, 2010 Oct;36(10):1149-67.
PMID: 20380595 DOI: 10.3109/03639041003695063

Microspheres prepared from rigid guluronic acid- (MG) and flexible mannuronic acid-rich (MC) alginate will undergo different drug release changes with respect to the influence of microwave on the matrix. An in-depth understanding of their differences in drug release changes is attainable through investigating cross-linking agent-free alginate microspheres prepared by spray-drying technique.
In vitro and in vivo evaluation of self-microemulsifying drug delivery system of buparvaquone

Venkatesh G, Majid MI, Mansor SM, Nair NK, Croft SL, Navaratnam V

Drug Dev Ind Pharm, 2010 Jun;36(6):735-45.
PMID: 20136493 DOI: 10.3109/03639040903460446

The aim of this study was to prepare a lipid-based self-microemulsifying drug delivery system (SMEDDS) to increase the solubility and oral bioavailability of a poorly water-soluble compound, buparvaquone (BPQ).
Design of a 24-hour controlled porosity osmotic pump system containing PVP: formulation variables

Yakubu R, Peh KK, Tan YT

Drug Dev Ind Pharm, 2009 Dec;35(12):1430-8.
PMID: 19929202 DOI: 10.3109/03639040902988566

The purpose of this study was to design a 24-hour controlled porosity osmotic pump system that utilizes polyvinyl pyrrolidone (PVP) as an osmotic-suspending/release retarding agent of drugs.
Preparation, characterization, and in vivo evaluation of insulin-loaded PLA-PEG microspheres for controlled parenteral drug delivery

Sheshala R, Peh KK, Darwis Y

Drug Dev Ind Pharm, 2009 Nov;35(11):1364-74.
PMID: 19832637 DOI: 10.3109/03639040902939213

AIM: The aim of this study was to prepare insulin-loaded poly(lactic acid)-polyethylene glycol microspheres that could control insulin release at least for 1 week and evaluate their in vivo performance in a streptozotocin-induced diabetic rat model.
METHODS: The microspheres were prepared using a water-in-oil-in-water double emulsion solvent evaporation technique. Different formulation variables influencing the yield, particle size, entrapment efficiency, and in vitro release profiles were investigated. The pharmacokinetic study of optimized formulation was performed with single dose in comparison with multiple dose of Humulin 30/70 as a reference product in streptozotocin-induced diabetic rats.
RESULTS: The optimized formulation of insulin microspheres was nonporous, smooth-surfaced, and spherical in structure under scanning electron microscope with a mean particle size of 3.07 microm and entrapment efficiency of 42.74% of the theoretical amount incorporated. The in vitro insulin release profiles was characterized by a bimodal behavior with an initial burst release because of the insulin adsorbed on the microsphere surface, followed by slower and continuous release corresponding to the insulin entrapped in polymer matrix.
CONCLUSIONS: The optimized formulation and reference were comparable in the extent of absorption. Consequently, these microspheres can be proposed as new controlled parenteral delivery system.
Solubility of core materials in aqueous polymeric solution effect on microencapsulation of curcumin

Aziz HA, Peh KK, Tan YT

Drug Dev Ind Pharm, 2007 Nov;33(11):1263-72.
PMID: 18058323

Curcumin, the main active constituent of turmeric herb (Curcuma longa L.) have been reported to possess many medicinal values. The application of curcumin in dermatological preparations is limited by their intense yellow color property, which stains the fabric and skin. The objectives of this study were to reduce the color staining effect and enhance the stability of curcumin via microencapsulation using gelatin simple coacervation method. As for curcumin, ethanol and acetone were used as coacervating solvents. Curcumin was dispersed in ethanol while dissolved in acetone. Irrespective of the types of coacervating solvents used, microencapsulation resolved the color-staining problem and enhanced the flow properties and photo-stability of curcumin. Nevertheless, it was found that more spherical curcumin microcapsules with higher yield, higher curcumin loading, and higher entrapment efficiency were obtained with acetone than ethanol. The in vitro release of curcumin after microencapsulation was slightly prolonged. Further evaluation of the effects of solubility of core materials in coacervating solvent or polymeric aqueous solution using six different drug compounds, namely, ketoconazole, ketoprofen, magnesium stearate, pseudoephedrine HCl, diclofenac sodium, and paracetamol, suggested that the solubility of core materials in aqueous polymeric solution determined the successful formation of microcapsules. Microcapsules could only be formed if the core materials were not dissolved in the aqueous polymeric solution while the core materials could either be dissolved or dispersed in the coacervating solvent. In summary, microencapsulation not only circumvents the color-staining problem but also improved the stability and flowability of curcumin. The solubility of core material in aqueous polymeric solution plays a pivotal role in determining the successful formation of microcapsules.
Possible mechanism for drug retardation from glyceryl monostearate matrix system

Peh KK, Wong CF, Yuen KH

Drug Dev Ind Pharm, 2000 Apr;26(4):447-50.
PMID: 10769787

Lipophilicity was evaluated as a possible mechanism for drug retardation from a glyceryl monostearate matrix system. Lipophilicity of the glyceryl monostearate matrix system was studied using contact angle measurement of water droplets on the surface of compressed disks, extrudate ascension of water, and movement of water through a powder mixture packed in a high-performance liquid chromatographic (HPLC) column. Increase in glyceryl monostearate content resulted in an increase in water droplet contact angle, decrease in the rate of water ascending the extrudate, and increase in the pressure values as a function of flow rate of water moving through the powder mixture. These could be due to the increase in lipophilicity of the matrix, rendering the matrix less wettable. As a result, the rate of water penetration into the matrix decreased, and the drug release could be sustained.
Relating in vitro/in vivo data of two controlled-release metformin formulations

Yuen KH, Peh KK, Tan BL

Drug Dev Ind Pharm, 1999 May;25(5):613-8.
PMID: 10219530

This study was conducted to compare the bioavailability of two controlled-release metformin preparations (Diabetmin Retard and Glucophage Retard) and also to correlate the in vitro and in vivo data obtained with the two preparations. Twelve healthy volunteers participated in the study, conducted according to a completely randomized, two-way crossover design. The preparations were compared using area under the plasma concentration-time curve AUC0-infinity, time to reach peak plasma concentration Tmax, and peak plasma concentration Cmax, while correlation was determined between in vitro release and in vivo absorption. Diabetmin Retard demonstrated a slower rate of in vitro release, but a faster rate of in vivo absorption than Glucophage Retard. However, the in vivo absorption of both products was found to be slower than that of drug released in vitro. A satisfactory relationship could be established between the in vitro and in vivo results, but there was no rank order correlation. No statistically significant difference was observed between the two preparations in the parameters AUC0-infinity and Cmax. However, a slight but statistically significant difference was observed between the Tmax values, but it may not be therapeutically significant. Moreover, the 90% confidence interval for the ratio of the logarithmic transformed AUC0-infinity values, as well as the logarithmic transformed Cmax values, of Diabetmin Retard over those of Glucophage Retard was within the acceptance criteria of 0.80-1.25.
Comparative bioavailability study of two atenolol tablet preparations

Peh KK, Yuen KH, Wong JW, Toh WT

Drug Dev Ind Pharm, 1999 Mar;25(3):357-60.
PMID: 10071830

A study was conducted to compare the bioavailability of a generic product of atenolol (Normaten FC) with the innovator product, Tenormin. Twelve healthy adult volunteers participated in the study conducted according to a randomized, two-way crossover design. The preparations were compared using area under the plasma concentration-time curve AUC0-infinity, peak plasma concentration Cmax, and time to reach peak plasma concentration Tmax. No statistically significant difference was obtained between the Tmax values and the logarithmic transformed AUC0-infinity and Cmax values of the two products. Moreover, the 90% confidence interval for the ratio of the logarithmically transformed AUC0-infinity values of Normaten FC over those of Tenormin was found to lie between 0.82 and 0.98, while that of the logarithmically transformed Cmax values was between 0.82 and 1.09, both being within the bioequivalence limit of 0.80-1.25. The values of elimination half-life t1/2 between the two products were also found comparable and not significantly different statistically. The t1/2 values obtained in our study were slightly longer than those reported in the literature for other population groups.
Comparative bioavailability study of a generic naltrexone tablet preparation

Yuen KH, Peh KK, Billa N

Drug Dev Ind Pharm, 1999 Mar;25(3):353-6.
PMID: 10071829

The bioavailability of a generic preparation of naltrexone (Narpan) was compared with the innovator product, Trexan. Twelve healthy volunteers participated in the study, conducted according to a completely randomized, two-way crossover design. The preparations were compared using the parameters area under the plasma concentration-time curve AUC0-infinity, peak plasma concentration Cmax, and time to reach peak plasma concentration Tmax. No statistically significant difference was observed between the logarithmic transformed AUC0-infinity and the logarithmically transformed Cmax values of the two preparations. Also, no statistically significant difference was observed between the untransformed Tmax values. In addition, the 90% confidence interval for the ratio of the logarithmic transformed AUC0-infinity values of Narpan over those of Trexan was found to lie between 0.87 and 1.01, while that of the logarithmic transformed Cmax values was between 0.94 and 1.23, both being within the bioequivalence limit of 0.80-1.25. The numerical values of the elimination half-life (t1/2) obtained with the two preparations were also not significantly different and were comparable to those reported in the literature.
Pharmacokinetic and bioequivalent study of a generic Metoprolol tablet preparation

Yuen KH, Peh KK, Chan KL, Toh WT

Drug Dev Ind Pharm, 1998 Oct;24(10):955-9.
PMID: 9876550

A study was conducted to compare the in vivo bioavailability of a generic metoprolol tablet preparation (Metoprolol) with that of the innovator product, Betaloc. Both preparations have a labeled dose of 100 mg metoprolol tartrate. Twelve healthy adult male volunteers participated in the study, which was conducted according to a standard two-way crossover design with a washout period of 1 week. The bioavailability was compared using the total area under the plasma level versus time curve (AUC0-infinity), peak plasma concentration (Cmax), and time to reach peak plasma concentration (Tmax). No statistically significant difference was observed between the logarithmically transformed AUC0-infinity values or the logarithmically transformed Cmax values of the two preparations. However, a statistically significant difference was observed between the Tmax values, but may not be therapeutically significant or important. Moreover, the 90% confidence interval (CI) for the ratio of the logarithmically transformed AUC0-infinity values of Metoprolol over those of Betaloc was calculated to be between 0.94 and 1.02, while that of Cmax was between 0.98 and 1.01, both of which are within the acceptable limit of 0.80-1.25. From the data obtained, it was also observed that a high proportion of our volunteers of Asian origin appeared to be poor metabolizers of metoprolol, which was consistent with what had been observed in our previous study of another preparation of metoprolol.
Transdermal anti-inflammatory activity of bilayer film containing olive compound hydroxytyrosol: physical assessment, in vivo dermal safety and efficacy study in Freund's adjuvant-induced arthritic rat model

Ng SF, Tan LS, Buang F

Drug Dev Ind Pharm, 2017 Jan;43(1):108-119.
PMID: 27588411 DOI: 10.1080/03639045.2016.1224893

Previous studies have shown that hydroxytyrosol (HT) can be a potential alternative therapeutic agent for the treatment of rheumatoid arthritis (RA). However, HT is extensively metabolized following oral administration, which leads to formulating HT in a topical vehicle to prolong drug action as well as to provide a localized effect. Hidrox-6 is a freeze-dried powder derived from fresh olives and contains a high amount of HT (∼3%) and other polyphenols. Alginate bilayer films containing 5% and 10% Hidrox-6 were formulated. The films were characterized with respect to their physical, morphology, rheological properties; drug content uniformity; and in vitro drug release. Acute dermal irritancy tests and a skin sensitization study were carried out in rats. An efficacy study of the bilayer films for RA was conducted using Freund's adjuvant-induced polyarthritis rats. Animal data showed that the bilayer film formulations did not cause skin irritancy. The efficacy in vivo results showed that the Hidrox-6 bilayer films lowered the arthritic scores, paw and ankle circumference, serum IL-6 level and cumulative histological scores compared with those measured for controls. The topical Hidrox-6 bilayer films improve synovitis and inflammatory symptoms in RA and can be a potential alternative to oral RA therapy.
Evaluation of superabsorbent linseed-polysaccharides as a novel stimuli-responsive oral sustained release drug delivery system

Haseeb MT, Hussain MA, Bashir S, Ashraf MU, Ahmad N

Drug Dev Ind Pharm, 2017 Mar;43(3):409-420.
PMID: 27808567 DOI: 10.1080/03639045.2016.1257017

CONTEXT: Advancement in technology has transformed the conventional dosage forms to intelligent drug delivery systems. Such systems are helpful for targeted and efficient drug delivery with minimum side effects. Drug release from these systems is governed and controlled by external stimuli (pH, enzymes, ions, glucose, etc.). Polymeric biomaterial having stimuli-responsive properties has opened a new area in drug delivery approach.
OBJECTIVE: Potential of a polysaccharide (rhamnogalacturonan)-based hydrogel from Linseeds (Linum usitatissimum L.) was investigated as an intelligent drug delivery material.
MATERIALS AND METHODS: Different concentrations of Linseed hydrogel (LSH) were used to prepare caffeine and diacerein tablets and further investigated for pH and salt solution-responsive swelling, pH-dependent drug release, and release kinetics. Morphology of tablets was observed using SEM.
RESULTS: LSH tablets exhibited dynamic swelling-deswelling behavior with tendency to swell at pH 7.4 and in deionized water while deswell at pH 1.2, in normal saline and ethanol. Consequently, pH controlled release of the drugs was observed from tablets with lower release (<10%) at pH 1.2 and higher release at pH 6.8 and 7.4. SEM showed elongated channels in swollen then freeze-dried tablets.
DISCUSSION: The drug release was greatly influenced by the amount of LSH in the tablets. Drug release from LSH tablets was governed by the non-Fickian diffusion.
CONCLUSIONS: These finding indicates that LSH holds potential to be developed as sustained release material for tablet.
Fabrication and characterization of matrix type transdermal patches loaded with tizanidine hydrochloride: potential sustained release delivery system

Shahid N, Siddique MI, Razzaq Z, Katas H, Waqas MK, Rahman KU

Drug Dev Ind Pharm, 2018 Dec;44(12):2061-2070.
PMID: 30081679 DOI: 10.1080/03639045.2018.1509081

OBJECTIVE: This study was designed to optimize and develop matrix type transdermal drug delivery system (TDDS) containing tizanidine hydrochloride (TZH) using different polymers by solvent evaporation method.
SIGNIFICANCE: A strong need exists for the development of transdermal patch having improved bioavailability at the site of action with fewer side effects at off-target organs.
METHODS: The patches were physically characterized by texture analysis (color, flexibility, smoothness, transparency, and homogeneity), in vitro dissolution test and FTIR analysis. Furthermore, functional properties essential for TDDS, in vitro percentage of moisture content, percentage of water uptake, in vitro permeation by following different kinetic models, in vivo drug content estimation and skin irritation were determined using rabbit skin.
RESULTS: The optimized patches were soft, of uniform texture and thickness as well as pliable in nature. Novel transdermal patch showed ideal characteristics in terms of moisture content and water uptake. FTIR analysis confirmed no interaction between TZH and cellulose acetate phthalate (CAP). The patch showed sustained release of the drug which increased the availability of short acting TZH at the site of action. The patch also showed its biocompatibility to the in vivo model of rabbit skin.
CONCLUSIONS: The results demonstrated that topically applied transdermal patch will be a potential medicated sustain release patch for muscle pain which will improve patient compliance.

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links