Displaying publications 21 - 40 of 372 in total

Abstract:
Sort:
  1. Chew ZL, Tan EH, Palaniandy SA, Woon KS, Phuang ZX
    Sci Total Environ, 2023 Jan 15;856(Pt 1):159007.
    PMID: 36167122 DOI: 10.1016/j.scitotenv.2022.159007
    Improper discard of oil palm trunk and empty fruit bunch renders massive greenhouse gases. Turning these palm wastes into solid biofuels could aid in carbon reduction. The embodied environmental impacts of the solid biofuel densification process are neglected in carbon emission quantification studies applying Greenhouse Gas Protocol while the significance of classifying the system's direct and indirect carbon emissions were overlooked in those utilising life cycle assessment. Despite the prospect of both methodologies to complement their limitations for carbon emissions quantification, no study integrates both methodologies to investigate direct and indirect emissions systematically from a life cycle perspective. An integrated framework of life cycle assessment and Greenhouse Gas Protocol is developed to quantify the direct and indirect carbon emissions of oil palm trunk and empty fruit bunch densification from cradle-to-gate for three pellet plants in Indonesia and Malaysia. The emissions are categorised into three emission scopes: Scope 1, Scope 2, and Scope 3 according to the Greenhouse Gas Protocol, integrated with avoided emissions which are quantified via life cycle assessment. The pellet plants generate 534.7-732.3 kg CO2-eq/tonnepellet per hour, in which Scope 1 (i.e., direct emissions) is the major emission scope due to high emissions from wastewater production and drying fuel combustion. Washing equipment (169.2-439.0 kg CO2-eq/tonnepellet per hour) and burners (87.1-214.5 kg CO2-eq/tonnepellet per hour) are the hotspots found in the pellet plants. Producing empty fruit bunch pellets could reduce 62.0-74.1 % of emissions than landfilling the empty fruit bunch. Empty fruit bunch pellet and oil palm trunk pellet are recommended to co-fire with coal to phase down coal usage in achieving COP26 pledge. This study provides data-driven insights for quantifying carbon emissions through the integrated framework and could be a reference in future life cycle carbon footprint studies of the biomass densification process.
    Matched MeSH terms: Biofuels*
  2. Nawaz S, Ahmad M, Asif S, Klemeš JJ, Mubashir M, Munir M, et al.
    Bioresour Technol, 2022 Jan;343:126068.
    PMID: 34626762 DOI: 10.1016/j.biortech.2021.126068
    The efforts have been made to review phyllosilicate derived (clay-based) heterogeneous catalysts for biodiesel production via lignocellulose derived feedstocks. These catalysts have many practical and potential applications in green catalysis. Phyllosilicate derived heterogeneous catalysts (modified via any of these approaches like acid activated clays, ion exchanged clays and layered double hydroxides) exhibits excellent catalytic activity for producing cost effective and high yield biodiesel. The combination of different protocols (intercalated catalysts, ion exchanged catalysts, acidic activated clay catalysts, clay-supported catalysts, composites and hybrids, pillared interlayer clay catalysts, and hierarchically structured catalysts) was implemented so as to achieve the synergetic effects (acidic-basic) in resultant material (catalyst) for efficient conversion of lignocellulose derived feedstock (non-edible oils) to biodiesel. Utilisation of these Phyllosilicate derived catalysts will pave path for future researchers to investigate the cost-effective, accessible and improved approaches in synthesising novel catalysts that could be used for converting lignocellulosic biomass to eco-friendly biodiesel.
    Matched MeSH terms: Biofuels*
  3. Sanjeevannavar MB, Banapurmath NR, Soudagar MEM, Atgur V, Hossain N, Mujtaba MA, et al.
    Chemosphere, 2022 Feb;288(Pt 2):132450.
    PMID: 34624353 DOI: 10.1016/j.chemosphere.2021.132450
    Biodiesel commercialization is questionable due to poor brake thermal efficiency. Biodiesel utilization should be improved with the addition of fuel additives. Hydrogen peroxide is a potential fuel additive due to extra hydrogen and oxygen content, which improves the combustion process. In this experimental study, biodiesel has been produced from Jatropha oil employing catalyzed transesterification homogeneously to examine its influence on the performance and emissions at engine loads with 1500 rpm utilizing a four-stroke single-cylinder diesel engine. D60B40 (having 60% diesel and 40% biodiesel) and D60B30A10 (60% diesel, 30% biodiesel and 10% hydrogen peroxide (H2O2)), are the fuel mixtures in the current study. The addition of H2O2 reduces emissions and enhances the combustion process. This effect occurred due to the micro-explosion of the injected fuel particles (which increases in-cylinder pressure and heat release rate (HRR)). An increase of 20% in BTE and 25% reduction in BSFC for D60B30A10 was observed compared to D60B40. Significant reduction in emissions of HC up to 17.54%, smoke by 24.6% CO2 by 3.53%, and an increase in NOx was noticed when the engine is operated with D60B30A10. The HRR increased up to 18.6%, ID reduced by 10.82%, and in-cylinder pressure increased by 8.5%. Test runs can be minimized as per Taguchi's design of experiments. It is possible to provide the estimates for the full factorial design of experiments. Exhaust gas temperature standards are evaluated and examined for all fuel blends.
    Matched MeSH terms: Biofuels*
  4. Su G, Ong HC, Mofijur M, Mahlia TMI, Ok YS
    J Hazard Mater, 2022 Feb 15;424(Pt B):127396.
    PMID: 34673394 DOI: 10.1016/j.jhazmat.2021.127396
    The application of waste oils as pyrolysis feedstocks to produce high-grade biofuels is receiving extensive attention, which will diversify energy supplies and address environmental challenges caused by waste oils treatment and fossil fuel combustion. Waste oils are the optimal raw materials to produce biofuels due to their high hydrogen and volatile matter content. However, traditional disposal methods such as gasification, transesterification, hydrotreating, solvent extraction, and membrane technology are difficult to achieve satisfactory effects owing to shortcomings like enormous energy demand, long process time, high operational cost, and hazardous material pollution. The usage of clean and safe pyrolysis technology can break through the current predicament. The bio-oil produced by the conventional pyrolysis of waste oils has a high yield and HHV with great potential to replace fossil fuel, but contains a high acid value of about 120 mg KOH/g. Nevertheless, the application of CaO and NaOH can significantly decrease the acid value of bio-oil to close to zero. Additionally, the addition of coexisting bifunctional catalyst, SBA-15@MgO@Zn in particular, can simultaneously reduce the acid value and positively influence the yield and quality of bio-oil. Moreover, co-pyrolysis with plastic waste can effectively save energy and time, and improve bio-oil yield and quality. Consequently, this paper presents a critical and comprehensive review of the production of biofuels using conventional and advanced pyrolysis of waste oils.
    Matched MeSH terms: Biofuels*
  5. Pocha CKR, Chia SR, Chia WY, Koyande AK, Nomanbhay S, Chew KW
    Chemosphere, 2022 Mar;290:133246.
    PMID: 34906526 DOI: 10.1016/j.chemosphere.2021.133246
    The ever-growing human population has resulted in the expansion of agricultural activity; evident by the deforestation of rainfoamrests as a means of acquiring fertile land for crops. The crops and fruits produced by such means should be utilized completely; however, there are still losses and under-exploitation of these produces which has resulted in wastes being mounted in landfills. These underutilized agricultural wastes including vegetables and fruits can serve as a potential source for biofuels and green diesel. This paper discusses the main routes (e.g., biological and thermochemical) for producing biofuels such as bioethanol, biodiesel, biogas, bio-oil and green diesel from underutilized crops by emphasizing recent technological innovations for improving biofuels and green diesel yields. The future prospects of a successful production of biofuels and green diesel by this source are also explained. Underutilized lignocelluloses including fruits and vegetables serve as a prospective biofuel and green diesel generation source for the future prosperity of the biofuel industry.
    Matched MeSH terms: Biofuels*
  6. Kabir G, Mohd Din AT, Hameed BH
    Bioresour Technol, 2017 Oct;241:563-572.
    PMID: 28601774 DOI: 10.1016/j.biortech.2017.05.180
    Oil palm mesocarp fiber (OPMF) and palm frond (PF) were respectively devolatilized by pyrolysis to OPMF-oil and PF-oil bio-oils and biochars, OPMF-char and PF-char in a slow-heating fixed-bed reactor. In particular, the OPMF-oil and PF-oil were produced to a maximum yield of 48wt% and 47wt% bio-oils at 550°C and 600°C, respectively. The high heating values (HHVs) of OPMF-oil and PF-oil were respectively found to be 23MJ/kg and 21MJ/kg, whereas 24.84MJ/kg and 24.15MJ/kg were for the corresponding biochar. The HHVs of the bio-oils and biochars are associated with low O/C ratios to be higher than those of the corresponding biomass. The Fourier transform infrared spectra and peak area ratios highlighted the effect of pyrolysis temperatures on the bio-oil compositions. The bio-oils are pervaded with numerous oxygenated carbonyl and aromatic compounds as suitable feedstocks for renewable fuels and chemicals.
    Matched MeSH terms: Biofuels*
  7. Tan YL, Abdullah AZ, Hameed BH
    Bioresour Technol, 2017 Nov;243:85-92.
    PMID: 28651142 DOI: 10.1016/j.biortech.2017.06.015
    Durian shell (DS) was pyrolyzed in a drop-type fixed-bed reactor to study the physicochemical properties of the products. The experiment was carried out with different particle sizes (up to 5mm) and reaction temperatures (250-650°C). The highest bio-oil yield was obtained at 650°C (57.45wt%) with DS size of 1-2mm. The elemental composition and higher heating value of the feedstock, bio-oil (650°C), and bio-char (650°C) were determined and compared. The compositions of product gases were determined via gas chromatography with thermal conductivity detector. The chemical composition of bio-oil was analyzed by gas chromatography-mass spectrometry. The bio-oil produced at lower temperature yields more alcohols, whereas the bio-oil produced at higher temperature contains more aromatics and carbonyls. Bio-oil has potential to be used as liquid fuel or fine chemical precursor after further upgrading. The results further showed the potential of bio-char as a solid fuel.
    Matched MeSH terms: Biofuels*
  8. Chia SR, Chew KW, Show PL, Yap YJ, Ong HC, Ling TC, et al.
    Biotechnol J, 2018 Jun;13(6):e1700618.
    PMID: 29356369 DOI: 10.1002/biot.201700618
    Microalgae are considered promising feedstock for the production of biofuels and other bioactive compounds, yet there are still challenges on commercial applications of microalgae-based products. This review focuses on the economic analysis, environmental impact, and industrial potential of biofuels production from microalgae. The cost of biofuels production remains higher compared to conventional fuel sources. However, integration of biorefinery pathways with biofuels production for the recovery of value-added products (such as antioxidants, natural dyes, cosmetics, nutritional supplements, polyunsaturated fatty acids, and so forth) could substantially reduce the production costs. It also paves the way for sustainable energy resources by significantly reducing the emissions of CO2 , NOx , SOx , and heavy metals. Large-scale biofuels production has yet to be successfully commercialized with many roadblocks ahead and heavy competition with conventional fuel feedstock as well as technological aspects. One of the prominent challenges is to develop a cost-effective method to achieve high-density microalgal cultivation on an industrial scale. The biofuels industry should be boosted by Government's support in the form of subsidies and incentives, for addressing the pressing climate change issues, achieving sustainability, and energy security.
    Matched MeSH terms: Biofuels/economics*
  9. Brosse N, Hussin MH, Rahim AA
    Adv. Biochem. Eng. Biotechnol., 2017 3 11;166:153-176.
    PMID: 28280848 DOI: 10.1007/10_2016_61
    Biofuels and chemicals can be produced from lignocellulosic feedstocks using biotechnological processes. The effective utilization of carbohydrates from biomass for the production of biofuels necessitates the development of pretreatment technologies to enhance their enzymatic digestibility. Among all the various pretreatment methods currently studied and developed, the organosolv processes, in which organic solvents or aqueous organic solvent mixtures are used as the pretreatment medium, appear to be specially promising in the context of the biorefinery because (1) they produce cellulosic pulp with a good enzymatic digestibility for monomeric glucose production and (2) they allow a clean fractionation of the major biomass components (cellulose, lignin, and hemicelluloses) into three process streams. In this chapter we give an updated overview of organosolv methods using conventional solvents and ionic liquids which have recently gained considerable interest as solvents for lignocellulosic biomass and pretreatment.
    Matched MeSH terms: Biofuels*
  10. Interdonato R, Bourgoin J, Grislain Q, Tagarelli A
    PLoS One, 2022;17(12):e0277608.
    PMID: 36454792 DOI: 10.1371/journal.pone.0277608
    Large-scale national and transnational commercial land transactions, or Large-Scale Land Acquisitions (LSLAs), have been gaining a lot of academic attention since the late 2000s and since the reported rush for land, resulting in turn from an increase in demand for arable land. If many data exist to characterize land deals, the analysis of investment networks remain limited and predominantly portrays power asymmetries between countries from the Global North investing in the Global South. The aim of this work is to perform a deeper investigation on the land trade market, specifically focusing on cases that do not follow such narratives. For instance, almost 25% of the countries included in the transnational land trade network do not follow a strict investor/target dichotomy, thus being characterized by a double role, i.e., they both acquire and cede land in the transnational context. In order to globally acknowledge for what was currently considered as abnormal cases, we model open access data about LSLAs extracted from the Land Matrix Initiative (LMI) open-access database into a network graph, and adapt an eigenvector based centrality method originally conceived for online social networks, namely LurkerRank, to identify and rank anomalous profiles in the land trade market. We take into account three different network snapshots: a multi-sector network (including all the transnational deals in the LMI database), and three networks referring to specific investment sectors (agriculture,mines and biofuels). Experimental results show that emerging economies (e.g., China and Malaysia) play a central role in the land trade market, by creating alternative dynamics that escape the classic North/South one. Our analyses also show how African countries that are often seen as targets of land trade transactions in a specific sector, may often acquire foreign land in the context of investments in the same sector (i.e., Zimbabwe for biofuels and the Democratic Republic of Congo for the mining sector).
    Matched MeSH terms: Biofuels*
  11. Rashedul HK, Kalam MA, Masjuki HH, Teoh YH, How HG, Monirul IM, et al.
    Environ Sci Pollut Res Int, 2017 Apr;24(10):9305-9313.
    PMID: 28233198 DOI: 10.1007/s11356-017-8573-9
    The study represents a comprehensive analysis of engine exhaust emission variation from a compression ignition (CI) diesel engine fueled with diesel-biodiesel blends. Biodiesel used in this investigation was produced through transesterification procedure from Moringa oleifera oil. A single cylinder, four-stroke, water-cooled, naturally aspirated diesel engine was used for this purpose. The pollutants from the exhaust of the engine that are monitored in this study are nitrogen oxide (NO), carbon monoxide (CO), hydrocarbon (HC), and smoke opacity. Engine combustion and performance parameters are also measured together with exhaust emission data. Some researchers have reported that the reason for higher NO emission of biodiesel is higher prompt NO formation. The use of antioxidant-treated biodiesel in a diesel engine is a promising approach because antioxidants reduce the formation of free radicals, which are responsible for the formation of prompt NO during combustion. Two different antioxidant additives namely 2,6-di-tert-butyl-4-methylphenol (BHT) and 2,2'-methylenebis(4-methyl-6-tert-butylphenol) (MBEBP) were individually dissolved at a concentration of 1% by volume in MB30 (30% moringa biodiesel with 70% diesel) fuel blend to investigate and compare NO as well as other emissions. The result shows that both antioxidants reduced NO emission significantly; however, HC, CO, and smoke were found slightly higher compared to pure biodiesel blends, but not more than the baseline fuel diesel. The result also shows that both antioxidants were quite effective in reducing peak heat release rate (HRR) and brake-specific fuel consumption (BSFC) as well as improving brake thermal efficiency (BTE) and oxidation stability. Based on this study, antioxidant-treated M. oleifera biodiesel blend (MB30) can be used as a very promising alternative source of fuel in diesel engine without any modifications.
    Matched MeSH terms: Biofuels*
  12. Mahlia TMI, Ismail N, Hossain N, Silitonga AS, Shamsuddin AH
    Environ Sci Pollut Res Int, 2019 May;26(15):14849-14866.
    PMID: 30937750 DOI: 10.1007/s11356-019-04563-x
    Due to global warming and increasing price of fossil fuel, scientists all over the world have been trying to find reliable alternative fuels. One of the most potential candidates is renewable energy from biomass. The race for renewable energy from biomass has long begun and focused on to combat the deteriorating condition of the environment. Palm oil has been in the spotlight as an alternative of bioenergy sources to resolve fossil fuel problem due to its environment-friendly nature. This review will look deep into the origins of palm oil and how it is processed, bioproducts from this biomass, and oil palm biomass-based power plant in Malaysia. Palm oil is usually processed from oil palm fruits and other parts of the oil palm plant are candidates for raw material of bioproduct generation. Oil palm biomass can be turned into three subcategories: bioproduct, biofuels, and biopower. Focusing on biofuel, the biodiesel from palm oil will be explored in detail and its implication in Malaysia as one of the biggest producers of oil palm in the world will also be emphasized comprehensively. The paper presents the detail of a schematic flow diagram of a palm oil mill process of transforming oil palm into crude palm oil and it wastes. This paper will also discuss the current oil palm biomass power plants in Malaysia. Palm oil has been proven itself as a potential alternative to reduce negative environmental impact of global warming.
    Matched MeSH terms: Biofuels*
  13. Isa MH, Bashir MJK, Wong LP
    Environ Sci Pollut Res Int, 2022 Jun;29(29):44779-44793.
    PMID: 35138542 DOI: 10.1007/s11356-022-19022-3
    In this study, palm oil mill effluent (POME) treated by ultrasonication at optimum conditions (sonication power: 0.88 W/mL, sonication duration: 16.2 min and total solids: 6% w/v) obtained from a previous study was anaerobically digested at different hydraulic retention times (HRTs). The reactor biomass was subjected to metagenomic study to investigate the impact on the anaerobic community dynamics. Experiments were conducted in two 5 L continuously stirred fill-and-draw reactors R1 and R2 operated at 30 ± 2 °C. Reactor R1 serving as control reactor was fed with unsonicated POME with HRT of 15 and 20 days (R1-15 and R1-20), whereas reactor R2 was fed with sonicated POME with the same HRTs (R2-15 and R2-20). The most distinct archaea community shift was observed among Methanosaeta (R1-15: 26.6%, R2-15: 34.4%) and Methanobacterium (R1-15: 7.4%, R2-15: 3.2%). The genus Methanosaeta was identified from all reactors with the highest abundance from the reactors R2. Mean daily biogas production was 6.79 L from R2-15 and 4.5 L from R1-15, with relative methane gas abundance of 85% and 73%, respectively. Knowledge of anaerobic community dynamics allows process optimization for maximum biogas production.
    Matched MeSH terms: Biofuels*
  14. Masudi A, Muraza O, Jusoh NWC, Ubaidillah U
    Environ Sci Pollut Res Int, 2023 Feb;30(6):14104-14125.
    PMID: 36585583 DOI: 10.1007/s11356-022-25048-4
    Fewer fossil fuel deposits, price volatility, and environmental concerns have intensified biofuel-based studies. Saccharification, gasification, and pyrolysis are some of the potential methods of producing carbohydrate-based fuels, while lipid extraction is the preferred method of producing biodiesel and green diesel. Over the years, multiple studies have attempted to identify an ideal catalyst as well as optimize the abovementioned methods to produce higher yields at a lower cost. Therefore, this present study comprehensively examined the factors affecting biodiesel stability. Firstly, isomerization, which is typically used to reduce unsaturated fatty acid content, was found to improve oxidative stability as well as maintain and improve cold flow properties. Meanwhile, polymers, surfactants, or small molecules with low melting points were found to improve the cold flow properties of biodiesel. Meanwhile, transesterification with an enzyme could be used to remove monoacylglycerols from oil feedstock. Furthermore, combining two natural antioxidants could potentially slow lipid oxidation if stainless steel, carbon steel, or aluminum are used as biodiesel storage materials. This present review also recommends combining green diesel and biodiesel to improve stability. Furthermore, green diesel can be co-produced at oil refineries that are more selective and have a limited supply of hydrogen. Lastly, next-generation farming should be examined to avoid competing interests in food and energy as well as to improve agricultural efficiency.
    Matched MeSH terms: Biofuels*
  15. Shah MA, Hayder G, Kumar R, Kumar V, Ahamad T, Kalam MA, et al.
    Sci Rep, 2023 Aug 30;13(1):14248.
    PMID: 37648719 DOI: 10.1038/s41598-023-41446-1
    A comprehensive understanding of physiochemical properties, thermal degradation behavior and chemical composition is significant for biomass residues before their thermochemical conversion for energy production. In this investigation, teff straw (TS), coffee husk (CH), corn cob (CC), and sweet sorghum stalk (SSS) residues were characterized to assess their potential applications as value-added bioenergy and chemical products. The thermal degradation behavior of CC, CH, TS and SSS samples is calculated using four different heating rates. The activation energy values ranged from 81.919 to 262.238 and 85.737-212.349 kJ mol-1 and were generated by the KAS and FWO models and aided in understanding the biomass conversion process into bio-products. The cellulose, hemicellulose, and lignin contents of CC, CH, TS, and SSS were found to be in the ranges of 31.56-41.15%, 23.9-32.02%, and 19.85-25.07%, respectively. The calorific values of the residues ranged from 17.3 to 19.7 MJ/kg, comparable to crude biomass. Scanning electron micrographs revealed agglomerated, irregular, and rough textures, with parallel lines providing nutrient and water transport pathways in all biomass samples. Energy Dispersive X-ray spectra and X-ray diffraction analysis indicated the presence of high carbonaceous material and crystalline nature. FTIR analysis identified prominent band peaks at specific wave numbers. Based on these findings, it can be concluded that these residues hold potential as energy sources for various applications, such as the textile, plastics, paints, automobile, and food additive industries.
    Matched MeSH terms: Biofuels*
  16. Ağbulut Ü, Sirohi R, Lichtfouse E, Chen WH, Len C, Show PL, et al.
    Bioresour Technol, 2023 May;376:128860.
    PMID: 36907228 DOI: 10.1016/j.biortech.2023.128860
    Microalgae have great potential in producing energy-dense and valuable products via thermochemical processes. Therefore, producing alternative bio-oil to fossil fuel from microalgae has rapidly gained popularity due to its environmentally friendly process and elevated productivity. This current work aims to review comprehensively the microalgae bio-oil production using pyrolysis and hydrothermal liquefaction. In addition, core mechanisms of pyrolysis and hydrothermal liquefaction process for microalgae were scrutinized, showing that the presence of lipids and proteins could contribute to forming a large amount of compounds containing O and N elements in bio-oil. However, applying proper catalysts and advanced technologies for the two aforementioned approaches could improve the quality, heating value, and yield of microalgae bio-oil. In general, microalgae bio-oil produced under optimal conditions could have 46 MJ/kg heating value and 60% yield, indicating that microalgae bio-oil could become a promising alternative fuel for transportation and power generation.
    Matched MeSH terms: Biofuels*
  17. Zhang C, Chen WH, Ho SH, Zhang Y, Lim S
    Bioresour Technol, 2023 Oct;386:129531.
    PMID: 37473787 DOI: 10.1016/j.biortech.2023.129531
    This study performs the comparative advantage analysis of oxidative torrefaction of corn stalks to investigate the advantages of oxidative torrefaction for biochar fuel property upgrading. The obtained results indicate that oxidative torrefaction is more efficient in realizing mass loss and energy density improvement, as well as elemental carbon accumulation and surface functional groups removal, and thus leads to a better fuel property. The maximum values of relative mass loss, higher heating value, enhancement factor, and energy yield are 3.00, 1.10, 1.03, and 0.87, respectively. The relative elemental carbon, hydrogen, and oxygen content ranges are 1.30-3.10, 1.50-3.30, and 2.00-6.80, respectively. In addition, an excellent linear distribution is obtained between the comprehensive pyrolysis index and torrefaction severity index, with elemental carbon and oxygen component variation stemming from pyrolysis performance correlating to the elemental component and valance.
    Matched MeSH terms: Biofuels*
  18. Sundaram T, Rajendran S, Gnanasekaran L, Rachmadona N, Jiang JJ, Khoo KS, et al.
    Bioengineered, 2023 Dec;14(1):2252228.
    PMID: 37661811 DOI: 10.1080/21655979.2023.2252228
    Algae-based biofuel developed over the past decade has become a viable substitute for petroleum-based energy sources. Due to their high lipid accumulation rates and low carbon dioxide emissions, microalgal species are considered highly valuable feedstock for biofuel generation. This review article presented the importance of biofuel and the flaws that need to be overcome to ensure algae-based biofuels are effective for future-ready bioenergy sources. Besides, several issues related to the optimization and engineering strategies to be implemented for microalgae-based biofuel derivatives and their production were evaluated. In addition, the fundamental studies on the microalgae technology, experimental cultivation, and engineering processes involved in the development are all measures that are commendably used in the pre-treatment processes. The review article also provides a comprehensive overview of the latest findings about various algae species cultivation and biomass production. It concludes with the most recent data on environmental consequences, their relevance to global efforts to create microalgae-based biomass as effective biofuels, and the most significant threats and future possibilities.
    Matched MeSH terms: Biofuels*
  19. Purba LDA, Susanti H, Admirasari R, Praharyawan S, Taufikurahman, Iwamoto K
    J Environ Manage, 2024 Feb 14;352:120104.
    PMID: 38242026 DOI: 10.1016/j.jenvman.2024.120104
    Cultivation of microalgae in wastewater stream has been extensively reported, especially for simultaneous production of biolipid and wastewater treatment process. This study aimed to derive the research trend and focus on biolipid production from microalgae cultivated in wastewater by using bibliometric approach. The search strategy used in Scopus database resulted in 1339 research articles from 1990 to November 2023. Majority of publications (46%) were affiliated to China and India, showing their predominance in this field. Keywords related to the center of attention included biodiesel, biofuel, biomass and nutrient removal. Meanwhile, keyword with recent publication year, indicating the emerging research trends, revolved around the cultivation techniques and application of the system. Co-culture involving more than one microalgae species, bacteria and yeast showed promising results, while addition of nanoparticles was also found to be beneficial. Increasing exploration on the application of microalgae for treatment of saline wastewater was also reported and the carbon fixation mechanism by microalgae has been widely investigated to promote less environmental impact. Future research on these topics were suggested based on the findings of the bibliometric analyses.
    Matched MeSH terms: Biofuels/analysis
  20. Soudagar MEM, Kiong TS, Jathar L, Nik Ghazali NN, Ramesh S, Awasarmol U, et al.
    Chemosphere, 2024 Apr;353:141540.
    PMID: 38423144 DOI: 10.1016/j.chemosphere.2024.141540
    The development of algae is seen as a potential and ecologically sound approach to address the increasing demands in multiple sectors. However, successful implementation of processes is highly dependent on effective growing and harvesting methods. The present study provides a complete examination of contemporary techniques employed in the production and harvesting of algae, with a particular emphasis on their sustainability. The review begins by examining several culture strategies, encompassing open ponds, closed photobioreactors, and raceway ponds. The analysis of each method is conducted in a systematic manner, with a particular focus on highlighting their advantages, limitations, and potential for expansion. This approach ensures that the conversation is in line with the objectives of sustainability. Moreover, this study explores essential elements of algae harvesting, including the processes of cell separation, dewatering, and biomass extraction. Traditional methods such as centrifugation, filtration, and sedimentation are examined in conjunction with novel, environmentally concerned strategies including flocculation, electro-coagulation, and membrane filtration. It evaluates the impacts on the environment that are caused by the cultivation process, including the usage of water and land, the use of energy, the production of carbon dioxide, and the runoff of nutrients. Furthermore, this study presents a thorough examination of the current body of research pertaining to Life Cycle Analysis (LCA) studies, presenting a perspective that emphasizes sustainability in the context of algae harvesting systems. In conclusion, the analysis ends up with an examination ahead at potential areas for future study in the cultivation and harvesting of algae. This review is an essential guide for scientists, policymakers, and industry experts associated with the advancement and implementation of algae-based technologies.
    Matched MeSH terms: Biofuels*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links