Displaying publications 21 - 40 of 189 in total

Abstract:
Sort:
  1. Hazarika PJ, Chakraborty S
    Sains Malaysiana, 2014;43:1801-1809.
    Hidden truncation (HT) and additive component (AC) are two well known paradigms of generating skewed distributions from known symmetric distribution. In case of normal distribution it has been known that both the above paradigms lead to Azzalini's (1985) skew normal distribution. While the HT directly gives the Azzalini's ( 1985) skew normal distribution, the one generated by AC also leads to the same distribution under a re parameterization proposed by Arnold and Gomez (2009). But no such re parameterization which leads to exactly the same distribution by these two paradigms has so far been suggested for the skewed distributions generated from symmetric logistic and Laplace distributions. In this article, an attempt has been made to investigate numerically as well as statistically the closeness of skew distributions generated by HT and AC methods under the same re parameterization of Arnold and Gomez (2009) in the case of logistic and Laplace distributions.
    Matched MeSH terms: Biometry
  2. Yahya N, Sukiman NK, Suhaimi NA, Azmi NA, Manan HA
    PLoS One, 2019;14(3):e0213583.
    PMID: 30897166 DOI: 10.1371/journal.pone.0213583
    BACKGROUND: The accessibility to radiotherapy facilities may affect the willingness to undergo treatment. We sought to quantify the distance and travel time of Malaysian population to the closest radiotherapy centre and to estimate the megavoltage unit (MV)/million population based on the regions.

    MATERIALS & METHODS: Data for subdistricts in Malaysia and radiotherapy services were extracted from Department of Statistics Malaysia and Directory of Radiotherapy Centres (DIRAC). Data from DIRAC were validated by direct communication with centres. Locations of radiotherapy centres, distance and travel time to the nearest radiotherapy were estimated using web mapping service, Google Map.

    RESULTS: The average distance and travel time from Malaysian population to the closest radiotherapy centre were 82.5km and 83.4mins, respectively. The average distance and travel were not homogenous; East Malaysia (228.1km, 236.1mins), Central (14.4km, 20.1mins), East Coast (124.2km, 108.8mins), Northern (42.9km, 42.8mins) and Southern (36.0km, 39.8mins). The MV/million population for the country is 2.47, East Malaysia (1.76), Central (4.19), East Coast (0.54), Northern (2.40), Southern (2.36). About 25% of the population needs to travel >100 km to get to the closest radiotherapy facility.

    CONCLUSION: On average, Malaysians need to travel far and long to reach radiotherapy facilities. The accessibility to radiotherapy facilities is not equitable. The disparity may be reduced by adding centres in East Malaysia and the East Coast.

    Matched MeSH terms: Biometry
  3. MAYCOCK HG, GIBSON-HILL MM
    Med J Malaya, 1954 Jun;8(4):343-50.
    PMID: 13193272
    Matched MeSH terms: Biometry*
  4. Kuan BB, Lim TK
    Med J Malaysia, 1984 Dec;39(4):280-4.
    PMID: 6544933
    Ultrasound measurement of ocular dimension is the chosen method for assessing axial length when determining dioptric power for intraocular lens. From the current results of 30 cases studied, the mean axial length ranges from 22 to 23 mm. Despite the limitation of the accuracy of the ultrasonic measurements with the 7.5 mHz transducer, the power of intraocular lens can. be determined satisfactorily in accordance with the knowledge of keratometric reading. Hence, high refractive errors could be avoided post-operatively.
    Matched MeSH terms: Biometry/methods
  5. Wong JY, Chu C, Chong VC, Dhillon SK, Loh KH
    J Fish Biol, 2016 Aug;89(2):1324-44.
    PMID: 27364089 DOI: 10.1111/jfb.13039
    Combined multiple 2D views (proximal, anterior and ventral aspects) of the sagittal otolith are proposed here as a method to capture shape information for fish classification. Classification performance of single view compared with combined 2D views show improved classification accuracy of the latter, for nine species of Sciaenidae. The effects of shape description methods (shape indices, Procrustes analysis and elliptical Fourier analysis) on classification performance were evaluated. Procrustes analysis and elliptical Fourier analysis perform better than shape indices when single view is considered, but all perform equally well with combined views. A generic content-based image retrieval (CBIR) system that ranks dissimilarity (Procrustes distance) of otolith images was built to search query images without the need for detailed information of side (left or right), aspect (proximal or distal) and direction (positive or negative) of the otolith. Methods for the development of this automated classification system are discussed.
    Matched MeSH terms: Biometry/methods*
  6. PATERSON PY, LEY HL, WISSEMAN CL, POND WL, SMADEL JE, DIERCKS FH, et al.
    Am J Hyg, 1952 Nov;56(3):320-33.
    PMID: 12996500
    Matched MeSH terms: Biometry*
  7. Sadia F, Mahmud I, Dhar E, Jahan N, Hossain SS, Zaidi Satter AKM
    Data Brief, 2019 Apr;23:103741.
    PMID: 31372407 DOI: 10.1016/j.dib.2019.103741
    The article identifies the relationship among different agile software development approaches such as response extensiveness, response efficiency, team autonomy, team diversity, and software functionality that software teams face difficult challenges in associating and achieving the right balance between the two agility dimensions. This research strategy, in terms of quantity, is descriptive and correlational. Statistical analysis of the data was carried out, using SmartPLS 3.0. Statistical population, consist of employees of software industries in Bangladesh, who were engaged in 2017 and their total number is about 100 people. The data show that the response extensiveness, response efficiency, team autonomy, team diversity, and software functionality have impact on software development agility and software development performance.
    Matched MeSH terms: Biometry
  8. Chaudhry MH, Ahmad A, Gulzar Q, Farid MS, Shahabi H, Al-Ansari N
    Sensors (Basel), 2021 Feb 27;21(5).
    PMID: 33673425 DOI: 10.3390/s21051649
    Unmanned Aerial Vehicle (UAV) is one of the latest technologies for high spatial resolution 3D modeling of the Earth. The objectives of this study are to assess low-cost UAV data using image radiometric transformation techniques and investigate its effects on global and local accuracy of the Digital Surface Model (DSM). This research uses UAV Light Detection and Ranging (LIDAR) data from 80 meters and UAV Drone data from 300 and 500 meters flying height. RAW UAV images acquired from 500 meters flying height are radiometrically transformed in Matrix Laboratory (MATLAB). UAV images from 300 meters flying height are processed for the generation of 3D point cloud and DSM in Pix4D Mapper. UAV LIDAR data are used for the acquisition of Ground Control Points (GCP) and accuracy assessment of UAV Image data products. Accuracy of enhanced DSM with DSM generated from 300 meters flight height were analyzed for point cloud number, density and distribution. Root Mean Square Error (RMSE) value of Z is enhanced from ±2.15 meters to 0.11 meters. For local accuracy assessment of DSM, four different types of land covers are statistically compared with UAV LIDAR resulting in compatibility of enhancement technique with UAV LIDAR accuracy.
    Matched MeSH terms: Biometry
  9. Mohamad R, Awang N, Kamaludin NF, Jotani MM, Tiekink ER
    Acta Crystallogr E Crystallogr Commun, 2017 Feb 01;73(Pt 2):260-265.
    PMID: 28217355 DOI: 10.1107/S2056989017001098
    The complete mol-ecule of the title compound, [Sn(C4H9)2(C5H10NOS2)2], is generated by a crystallographic mirror plane, with the SnIV atom and the two inner methyl-ene C atoms of the butyl ligands lying on the mirror plane; statistical disorder is noted in the two terminal ethyl groups, which deviate from mirror symmetry. The di-thio-carbamate ligand coordinates to the metal atom in an asymmetric mode with the resulting C2S4 donor set defining a skew trapezoidal bipyramidal geometry; the n-butyl groups are disposed to lie over the longer Sn-S bonds. Supra-molecular chains aligned along the a-axis direction and sustained by methyl-ene-C-H⋯S(weakly coordinating) inter-actions feature in the mol-ecular packing. A Hirshfeld surface analysis reveals the dominance of H⋯H contacts in the crystal.
    Matched MeSH terms: Biometry
  10. Pang,Nicholas Tze Ping, Koh,Eugene Boon Yau, Sandi James, Mohd Amiruddin Mohd Kassim
    Borneo Epidemiology Journal, 2020;1(2):157-162.
    MyJurnal
    Background and Objective: Biostatistics and epidemiology have been integral subjects in any postgraduate courses, including medical specialties Master programs. Both are widely accepted as among the difficult and confusing subjects, which worsen by lack of adequate exposure and often, time constraints. Hence, peer-led learning approach was proposed as a viable option to the traditional lecturer-driven learning style
    Method: The peer-led approach intends to promote targeted learning and conceptual understanding, instead of widely sweeping learning, which is rather directionless and could cause information overload
    Discussion: Students were divided into two groups, namely humanities-inclined group and science inclined group. Different pedagogical methods to address the different groups were discussed.
    Conclusion: This approach helps to make the learning more palatable, boosting knowledge retention and fostering camaraderie spirit among colleagues
    Matched MeSH terms: Biometry
  11. Bariah Mohd-Ali, Nazirin Arsad, Zainora Mohammed
    MyJurnal
    It is possible that different techniques used to measure axial length (AL) and anterior chamber depth (ACD) is the cause of discrepancy in refractive outcomes of cataract surgery. This study evaluated the agreement and repeatability of AL and ACD measurements using immersion and contact A-scan biometry techniques and compared the refractive outcomes from both techniques. Twenty four patients were evaluated for agreement and repeatability of AL and ACD measurements using the two different methods. The results were analyzed using Bland and Altman plots. Another 60 patients with age-related cataract were selected to compare the refractive outcomes between both methods. The IOL power was calculated using Sanders- Retzlaff- Kraff- Theoretical (SRK-T) equation. Refraction was determined between four to six weeks postoperatively and the results were analyzed using paired t-test. The results of this study showed good agreement between both techniques was noted with no significant difference detected between measurements (p > 0.05). Significant correlation was found in all parameters (AL: r = 0.99; p < 0.01, r = 0.99; p < 0.01) ACD: r = 0.91; p < 0.01, r = 0.97; p < 0.01). No significant difference in refractive outcomes of post cataract surgery was detected between the two techniques (p = 0.07). This study concludes that contact A-scan biometry and immersion techniques provide reliable results and should not be the cause of discrepancy in the refractive planned and outcome of cataract surgery.
    Matched MeSH terms: Biometry
  12. Maher D. Fuad Fuad, Munn Sann, L., Normala Ibrahim, Phang, Cheng Kar, Siti Irma Ismail, Balsam Mahdi Nasir Al-Zurfi
    MyJurnal
    Students-t test is the most popular statistical test. The test compares two mean values to judge if they are different or not. For small data it is possible to conduct it using manual calculation – however that is not the case. Researchers would need to use statistical software and packages to conduct their analysis. This guide will help the junior researchers to conduct independent- and paired-t test using STATA software.
    Matched MeSH terms: Biometry
  13. Wan Nor Arifin
    MyJurnal
    Multivariate analyses depend on multivariate normality assumption. Although the analyses are available in SPSS, it is not possible to assess the assumption from the basic package. Statistical assessment of the normality is available in a specialized package, SPSS Amos, in form of Mardia's multivariate kurtosis. However, graphical assessment of the normality by chi-square versus Mahalanobis distance plot is not available in both of the packages. The aim of this article is to present the steps to construct the plot in SPSS in a point-and-click manner as expected by most SPSS users.
    Matched MeSH terms: Biometry
  14. Wan Nor Arifin
    MyJurnal
    One of the most common reasons why researchers seek help from statistician is sample size calculation. However despite the common believe that it only involves formula and calculation, researchers often ignore other aspects of research design that leads to proper sample size calculation. In this article, the author outlines basic steps toward sample size calculation. The author also introduces the logic behind sample size calculation for single mean and single proportion in simplified and less intimidating forms to those not statistically inclined.
    Matched MeSH terms: Biometry
  15. Rafdzah, Z., Bulgiba, A., Ismail, N.A.
    JUMMEC, 2013;16(1):1-7.
    MyJurnal
    INTRODUCTION AND OBJECTIVE:
    Most of important variables measured in medicine are in numerical forms or continuous in nature. New instruments and tests are constantly being developed for the purpose of measuring various variables, with the aim of providing cheaper, non-invasive, more convenient and safe methods. When a new method of measurement or instrument is invented, the quality of the instrument has to be assessed. Agreement and reliability are both important parameters in determining the quality of an instrument. This article will discuss some issues related to methods comparison study in medicine for the benefit of medical professional and researcher.

    METHOD:
    This is a narrative review and this article review the most common statistical methods used to assess agreement and reliability of medical instruments that measure the same continuous outcome. The two methods discussed in detail were the Bland-Altman Limits of Agreement, and Intra-class Correlation Coefficient (ICC). This article also discussed some issues related to method comparison studies including the application of inappropriate statistical methods, multiple statistical methods, and the strengths and weaknesses of each method. The importance of appropriate statistical method in the analysis of agreement and reliability in medicine is also highlighted in this article.

    CONCLUSION:
    There is no single perfect method to assess agreement and reliability; however researchers should be aware of the inappropriate methods that they should avoid when analysing data in method comparison studies. Inappropriate analysis will lead to invalid conclusions and thus validated instrument might not be accurate or reliable. Consequently this will affect the quality of care given to a patient.
    Matched MeSH terms: Biometry
  16. Gradoni G, Russer J, Baharuddin MH, Haider M, Russer P, Smartt C, et al.
    Philos Trans A Math Phys Eng Sci, 2018 Oct 29;376(2134).
    PMID: 30373944 DOI: 10.1098/rsta.2017.0455
    This paper reviews recent progress in the measurement and modelling of stochastic electromagnetic fields, focusing on propagation approaches based on Wigner functions and the method of moments technique. The respective propagation methods are exemplified by application to measurements of electromagnetic emissions from a stirred, cavity-backed aperture. We discuss early elements of statistical electromagnetics in Heaviside's papers, driven mainly by an analogy of electromagnetic wave propagation with heat transfer. These ideas include concepts of momentum and directionality in the realm of propagation through confined media with irregular boundaries. We then review and extend concepts using Wigner functions to propagate the statistical properties of electromagnetic fields. We discuss in particular how to include polarization in this formalism leading to a Wigner tensor formulation and a relation to an averaged Poynting vector.This article is part of the theme issue 'Celebrating 125 years of Oliver Heaviside's 'Electromagnetic Theory''.
    Matched MeSH terms: Biometry
  17. Abu Hassan Shaari Mohd Nor, Ahmad Shamiri, Zaidi Isa
    In this research we introduce an analyzing procedure using the Kullback-Leibler information criteria (KLIC) as a statistical tool to evaluate and compare the predictive abilities of possibly misspecified density forecast models. The main advantage of this statistical tool is that we use the censored likelihood functions to compute the tail minimum of the KLIC, to compare the performance of a density forecast models in the tails. Use of KLIC is practically attractive as well as convenient, given its equivalent of the widely used LR test. We include an illustrative simulation to compare a set of distributions, including symmetric and asymmetric distribution, and a family of GARCH volatility models. Our results on simulated data show that the choice of the conditional distribution appears to be a more dominant factor in determining the adequacy and accuracy (quality) of density forecasts than the choice of volatility model.
    Matched MeSH terms: Biometry
  18. Suhaila J, Sayang Mohd Deni, Wan Zawiah Wan Zin, Abdul Aziz Jemain
    This study investigated the spatial pattern and trends of the daily rainfall data in Peninsular Malaysia based on seasonal rainfall indices. Five rainfall indices which describe the main characteristics of rainfall, the total amount of rainfall, frequency of wet days, rainfall intensity, extreme frequency, and extreme intensity, were employed in this study. The statistics of rainfall indices were calculated in terms of their means for four regions in Peninsular Malaysia for the period 1975 to 2004. The findings indicate that the southwest monsoon had the greatest impact on the western part of the Peninsula, particularly in characterizing the rainfall pattern of the northwest region. During this season, the northwest region could be considered as the wettest region since all rainfall indices tested are higher than in other regions of the Peninsula. Otherwise, the northwest region is denoted as the driest part of the Peninsula during the northeast monsoon period. The northwest region is less influenced by the northeast monsoon because of the existence of the Titiwangsa Range, which blocks the region from receiving heavy rainfall. On the other hand, it is found that the lowlands areas such as the eastern part of the Peninsula are strongly characterized by the northeast monsoonal flow. Based on the results of the Mann-Kendall test, as the trend of the total amount of rainfall and the frequency of wet days during the southwest monsoon decrease at most of the stations, the rainfall intensity increases. In contrast, increasing trends in both the total amount of rainfall and the frequency of wet days were observed at several stations during the northeast monsoon, which give rise to the increasing trend of rainfall intensity. The results for both seasons indicate that there are significantly decreasing trends in the frequency of wet days during the extreme events for most of the stations on the peninsula. However, a smaller number of significant trends was found for extreme intensity.
    Matched MeSH terms: Biometry
  19. S.Z. Satari, Y.Z. Zubairi, S.F. Hassan, A.G. Hussin
    Sains Malaysiana, 2015;44:1521-1530.
    The statistical characteristics of wind direction that was recorded at maximum wind speed in Peninsular Malaysia for two monsoons from 1999 to 2008 for seven stations were analyzed in this study. Modeled by von Mises distribution, the change in parameters values namely mean direction and concentration parameter was measured. Statistical summary, graphical representations, Watson-William Test and linear-circular correlation are used in the analysis. It is found that there is a significant change in the mean direction of wind over the period of ten years for most stations in Peninsular Malaysia. However, there is a weak relationship between wind direction and wind speed. This study suggested the presence of prominent direction of wind that blows in Peninsular Malaysia by monsoon. This finding may provide useful information on giving a better understanding of the behavior of the wind in Peninsular Malaysia and the potential use of wind as an alternative source of energy.
    Matched MeSH terms: Biometry
  20. Abdullah HM, Khairudin R, Fatimah wH
    Jurnal Psikologi Malaysia, 2014;olume 28:88-97.
    This study was carried out to determine the influence of LMX towards the SCB worker dimension in a national automotive company in Malaysia. There were 360 respondents from the automotive company involved in this study. Data collected from respondents were analysed using descriptive (demographic frequencies) and inferential statistics (correlation and regression analysis). The results showed that one of the four independent variables has a positive influence on SCB. In terms of the demographic factors, none of the variables (age, gender and period of service) made any significant difference on LMX and SCB, except the position category. Further suggestions regarding LMX and SCB are discussed based on the findings.
    Matched MeSH terms: Biometry
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links