Displaying publications 21 - 40 of 200 in total

Abstract:
Sort:
  1. Ng SW, Shanmuga Sundara Raj S, Fun HK, Razak IA, Hook JM
    Acta Crystallogr C, 2000 Aug;56 ( Pt 8):966-8.
    PMID: 10944291
    catena-Poly[dicyclohexylammonium [tributyltin-mu-(4-oxo-4H-pyran-2,6-dicarboxylato-O(2):O( 6))]], (C(12)H(24)N)[Sn(C(7)H(2)O(6))(C(4)H(9))(3)], consists of 4-oxo-4H-pyran-2,6-dicarboxylato groups that axially link adjacent tributyltin units into a linear polyanionic chain. The ammonium counter-ions surround the chain, and each cation forms a pair of hydrogen bonds to the double-bond carbonyl O atoms of the same dianionic group. The chain propagates in a zigzag manner along the c axis of the monoclinic cell. In catena-poly[methyl(phenyl)ammonium [tributyltin-mu-(pyridine-2,6-dicarboxylato-O(2):O(6))]], (C(7)H(10)N)[Sn(C(7)H(3)NO(4))(C(4)H(9))(3)], the pyridine-2, 6-dicarboxylato groups also link the tributyltin groups into a chain, but the hydrogen-bonded chain propagates linearly on the ac face of the monoclinic cell.
    Matched MeSH terms: Crystallography, X-Ray
  2. Azami MS, Nawawi WI, Ali H. Jawad, Ishak MAM, Azami MS, K. Ismail
    Sains Malaysiana, 2017;46:1390-1316.
    Nitrogen doped titanium dioxide (N-doped TiO2
    ) was synthesized by microwave using urea as nitrogen sources with
    commercially available TiO2
    -P25. The N-doped TiO2
    was compared with unmodified TiO2
    by carrying out the investigation
    on its properties using x-ray diffraction (XRD) analysis, Brunauer-Emmett-Teller (BET), Fourier transformed infrared
    spectroscopy (FTIR) and diffuse reflectance spectroscopy (UV-Vis DRS). The photocatalytic activities of N-doped TiO2
    and unmodified TiO2 were studied for photodegradation of reactive red 4 (RR4) under light emitting diode (LED) light
    irradiation. An active photoresponse under LED light irradiation was observed from N-doped TiO2
    with 60 min of time
    irradiation to complete RR4 color removal while no photocatalytic degradation was observed from unmodified.
    Matched MeSH terms: Crystallography, X-Ray
  3. Challabi AJH, Chieng BW, Ibrahim NA, Ariffin H, Zainuddin N
    Polymers (Basel), 2019 Mar 13;11(3).
    PMID: 30960466 DOI: 10.3390/polym11030482
    The effectiveness of superheated steam (SHS) as an alternative, eco-friendly treatment method to modify the surface of pineapple leaf fiber (PALF) for biocomposite applications was investigated. The aim of this treatment was to improve the interfacial adhesion between the fiber and the polymer. The treatment was carried out in an SHS oven for different temperatures (190⁻230 °C) and times (30⁻120 min). Biocomposites fabricated from SHS-treated PALFs and polylactic acid (PLA) at a weight ratio of 30:70 were prepared via melt-blending techniques. The mechanical properties, dimensional stability, scanning electron microscopy (SEM), and X-ray diffraction (XRD) for the biocomposites were evaluated. Results showed that treatment at temperature of 220 °C for 60 min gave the optimum tensile properties compared to other treatment temperatures. The tensile, flexural, and impact properties as well as the dimensional stability of the biocomposites were enhanced by the presence of SHS-treated PALF. The SEM analysis showed improvement in the interfacial adhesion between PLA and SHS-treated PALF. XRD analysis showed an increase in the crystallinity with the addition of SHS-PALF. The results suggest that SHS can be used as an environmentally friendly treatment method for the modification of PALF in biocomposite production.
    Matched MeSH terms: Crystallography, X-Ray
  4. Bin Sintang MD, Danthine S, Khalenkow D, Tavernier I, Tzompa Sosa DA, Julmohammad NB, et al.
    Chem Phys Lipids, 2020 08;230:104912.
    PMID: 32371001 DOI: 10.1016/j.chemphyslip.2020.104912
    Phytosterols (PSs) are insoluble in water and poorly soluble in oil, which hampers their potential as cholesterol level regulator in human. To mitigate this problem, monoglycerides (MGs) were used to modulates the crystallization behavior of PSs. Therefore, the understanding on mixing behavior provides the insight into different aspects of crystallization and the resultant effects. The effects on thermal, morphology, diffraction, and spectroscopy behavior were investigated for binary mixtures of 11 different ratios (100:0 to 0:100 MGs:PSs). The phase behavior of binary mixtures of commercial MGs and PSs exhibited complexity with the formation of eutectic mixtures at 90:10 and 80:20 (MGs:PSs) combinations. These combinations revealed a single melting profile and reduced melting enthalpy, though after a month of storage at 5 °C. Conversely, two separate melting regions were observed in others. Furthermore, powder X-ray diffraction (PXRD) analysis of selected combinations revealed a change in crystalline forms with changes in the peaks located between 18-19° (2θ) and 25-26° (2θ). Accordingly, Raman spectroscopy results revealed changes in intensities and peak shape. Therefore, the change in crystalline forms or behavior correlated well to the change in thermal properties. Overall, the characterizations revealed the formation of eutectic mixtures between MGs and PSs at 90:10 and 80:20 (MGs:PSs) in which MGs modified the crystallization of PSs and changed the crystal forms thus, thermal behaviors. This study provides new insight into the mixing behavior of MGs and PSs which supports other research. Therefore, the results of this study are beneficial for the improvement of formulation of phytosterols in food and pharmaceutical products. Nonetheless, this study reveals a simple technique to alter crystal forms of phytosterols through simple complexation with monoglycerides.
    Matched MeSH terms: Crystallography, X-Ray
  5. Zuhailawati Hussain, Yong, Tuck Leong
    MyJurnal
    In this paper, densification of in-situ copper-niobium carbide composite using cold pressing technique was addressed. Mixtures of Cu-20vol%NbC powder were prepared by two methods.
    In first method, a mixture of Cu-15.79wt%Nb-2.04wt%C powder was milled at 400 rpm for 35 hours in a planetary mill. In second method, Cu and commercial NbC powder was mixed at 100 rpm for 2 hours in a jar mill. Then, both powders were pressed at different pressure (i.e. 350 MPa, 450 MPa, 550 MPa and 650 MPa) and sintered at 900 o C for 1 hour. Sample of in-situ and ex-situ Cu-20vol%NbC composite were characterized for density, hardness, phase formation by x-ray diffraction analysis and microstructure by scanning electron microscope. Xray diffraction analysis showed that NbC phase was formed in the in-situ processed sample. Hardness of in-situ processed copper composite was higher than that of the ex-situ processed copper composite due to good interface between coper matrix and niobium carbide reinforcement particle as well as distribution of finer niobium carbide particles in copper matrix. Sintered density of in-situ composite is lower than density of ex-situ composite beacuse of work hardening of the Cu-Nb-C mixture powder during powder to ball collision. Density and hardness of the in-situ and ex-situ Cu-20vol%NbC composites increase with the increase in compaction pressure as porosity is eliminated at higher compaction pressure.
    Matched MeSH terms: Crystallography, X-Ray
  6. Balela, M.D.L., Lockman, Z., Azizan, A., Matsubara, E., Amorsolo , A.V. Jr.
    MyJurnal
    Monodispersed and size-tunable nanocrystalline cobalt (Co) particles in the range of 100 to 400 nm are prepared by the reduction of Co(II) species in propylene glycol. Control of the particle size is achieved by varying the initial Co(II) species concentration and by the addition of nucleating agents. Smaller Co particles are produced with increasing amounts of Co(II) species and in the presence of nucleating agents. X-ray diffraction analysis (XRD) shows that the Co particles are predominantly face-centered cubic crystals of about 8-14 nm. The Co particles are also ferromagnetic at room temperature.
    Matched MeSH terms: Crystallography, X-Ray
  7. Yusof Abdullah, Abdul Razak Daud, Mohd Harun, Roslinda Shamsudin
    MyJurnal
    Al-Si/SiC composites with the fraction of 5 and 15 wt. % fine SiC particles were fabricated using stir casting process by which SiC powders were poured into aluminium melt and cast in a stainless steel mould to form ingot. Characterization by X-ray diffraction (XRD) analysis showed the presence of constituent and intermetallic materials in the composites. Microstructure study revealed that both fine and course particles scattered in the Al-Si matrix. The characterization of thermal properties showed that the thermal conductivity and coefficient of thermal expansion decreased with the increase in SiC content. The conductivity and expansion behavior is correlated to the microstructure and weight fraction of the SiC particles. Meanwhile, the hardness of the composite increased with the increasing of SiC particles in the composites.
    Matched MeSH terms: Crystallography, X-Ray
  8. Ruslimie C, Hasmizam Razali, Wan M. Khairul
    Sains Malaysiana, 2011;40:1179-1186.
    Titanium dioxide photocatalyst was synthesised by microemulsions method under controlled hydrolysis of titanium butoxide, Ti(O(CH2)3)CH3. The synthesised TiO2 photocatalyst was compared with Sigma-commercial TiO2 by carrying out the investigation on its properties using scanning electron microscopy (SEM), x-ray diffraction (XRD) analysis and thermal gravimetric analysis (TGA). The photocatalytic activities for both photocatalysts were studied for atrazine photodegradation.
    Matched MeSH terms: Crystallography, X-Ray
  9. Zainuri DA, Abdullah M, Zaini MF, Bakhtiar H, Arshad S, Abdul Razak I
    PLoS One, 2021;16(9):e0257808.
    PMID: 34582495 DOI: 10.1371/journal.pone.0257808
    The Ultraviolet-visible (UV-Vis) spectra indicate that anthracenyl chalcones (ACs) have high maximum wavelengths and good transparency windows for optical applications and are suitable for optoelectronic applications owing to their HOMO-LUMO energy gaps (2.93 and 2.76 eV). Different donor substituents on the AC affect their dipole moments and nonlinear optical (NLO) responses. The positive, negative, and neutral electrostatic potential regions of the molecules were identified using molecular electrostatic potential (MEP). The stability of the molecule on account of hyperconjugative interactions and accompanying charge delocalization was analyzed using natural bond orbital (NBO) analysis. Open and closed aperture Z-scans were performed using a continuous-wave frequency-doubled diode-pumped solid-state (DPSS) laser to measure the nonlinear absorption and nonlinear refractive index coefficients, respectively. The valley-to-peak profile of AC indicated a negative nonlinear refractive index coefficient. The obtained single crystals possess reverse saturation absorption due to excited-state absorption. The structural and nonlinear optical properties of the molecules have been discussed, along with the role of anthracene substitution for enhancing the nonlinear optical properties. The calculated third-order susceptibility value was 1.10 x10-4 esu at an intensity of 4.1 kW/cm2, higher than the reported values for related chalcone derivatives. The NLO response for both ACs offers excellent potential in optical switching and limiting applications.
    Matched MeSH terms: Crystallography, X-Ray
  10. Shaibullah S, Mohd-Sharif N, Ho KL, Firdaus-Raih M, Nathan S, Mohamed R, et al.
    Acta Crystallogr F Struct Biol Commun, 2014 Dec 01;70(Pt 12):1697-700.
    PMID: 25484229 DOI: 10.1107/S2053230X14025278
    Melioidosis is an infectious disease caused by the pathogenic bacterium Burkholderia pseudomallei. Whole-genome sequencing revealed that the B. pseudomallei genome includes 5855 coding DNA sequences (CDSs), of which ∼25% encode hypothetical proteins. A pathogen-associated hypothetical protein, BPSL1038, was overexpressed in Escherichia coli, purified and crystallized using vapour-diffusion methods. A BPSL1038 protein crystal that grew using sodium formate as precipitant diffracted to 1.55 Å resolution. It belonged to space group C2221, with unit-cell parameters a = 85.36, b = 115.63, c = 46.73 Å. The calculated Matthews coefficient (VM) suggests that there are two molecules per asymmetric unit, with a solvent content of 48.8%.
    Matched MeSH terms: Crystallography, X-Ray
  11. Islam MS, Al-Majid AM, Barakat A, Soliman SM, Ghabbour HA, Quah CK, et al.
    Molecules, 2015 May 07;20(5):8223-41.
    PMID: 25961163 DOI: 10.3390/molecules20058223
    This paper describes an efficient and regioselective method for the synthesis of novel fluorinated spiro-heterocycles in excellent yield by cascade [5+1] double Michael addition reactions. The compounds 7,11-bis(4-fluorophenyl)-2,4-dimethyl- 2,4-diazaspiro[5.5] undecane-1,3,5,9-tetraone (3a) and 2,4-dimethyl-7,11-bis (4-(trifluoromethyl)phenyl)-2,4-diazaspiro[5.5]undecane-1,3,5,9-tetraone (3b) were characterized by single-crystal X-ray diffraction, FT-IR and NMR techniques. The optimized geometrical parameters, infrared vibrational frequencies and NMR chemical shifts of the studied compounds have also been calculated using the density functional theory (DFT) method, using Becke-3-Lee-Yang-Parr functional and the 6-311G(d,p) basis set. There is good agreement between the experimentally determined structural parameters, vibrational frequencies and NMR chemical shifts of the studied compounds and those predicted theoretically. The calculated natural atomic charges using NBO method showed higher polarity of 3a compared to 3b.The calculated electronic spectra are also discussed based on the TD-DFT calculations.
    Matched MeSH terms: Crystallography, X-Ray/methods
  12. Barakat A, Al-Majid AM, Soliman SM, Lotfy G, Ghabbour HA, Fun HK, et al.
    Molecules, 2015;20(11):20642-58.
    PMID: 26610441 DOI: 10.3390/molecules201119710
    The synthesis of the new diethyl ammonium salt of diethylammonium(E)-5-(1,5-bis(4-fluorophenyl)-3-oxopent-4-en-1-yl)-1,3-diethyl-4,6-dioxo-2-thioxohexaydropyrimidin-5-ide 3 via a regioselective Michael addition of N,N-diethylthiobarbituric acid 1 to dienone 2 is described. In 3, the carboanion of the thiobarbituric moiety is stabilized by the strong intramolecular electron delocalization with the adjacent carbonyl groups and so the reaction proceeds without any cyclization. The molecular structure investigations of 3 were determined by single-crystal X-ray diffraction as well as DFT computations. The theoretically calculated (DFT/B3LYP) geometry agrees well with the crystallographic data. The effect of fluorine replacement by chlorine atoms on the molecular structure aspects were investigated using DFT methods. Calculated electronic spectra showed a bathochromic shift of the π-π* transition when fluorine is replaced by chlorine. Charge decomposition analyses were performed to study possible interaction between the different fragments in the studied systems. Molecular docking simulations examining the inhibitory nature of the compound show an anti-diabetic activity with Pa (probability of activity) value of 0.229.
    Matched MeSH terms: Crystallography, X-Ray
  13. Kianfar AH, Kamil Mahmood WA, Dinari M, Farrokhpour H, Enteshari M, Azarian MH
    Spectrochim Acta A Mol Biomol Spectrosc, 2015 Feb 05;136 Pt C:1582-92.
    PMID: 25459719 DOI: 10.1016/j.saa.2014.10.051
    The [Co(naphophen)(PPh3)(OH2)]ClO4 and [Co(naphophen)(PBu3)(OH2)]BF4 (where naphophen=bis(naphthaldehyde)1,2-phenylenediimine) complexes were synthesized and chracterized by FT-IR, UV-Vis, (1)H NMR, (13)C NMR spectroscopy and elemental analysis techniques. The coordination geometry of the synthesized complexes were determined by X-ray crystallography. Cobalt (III) complexes have six-coordinated pseudo-octahedral geometry in which the O(1), O(2), N(1) and N(2) atoms of the Schiff base forms the equatorial plane. These complexes showed a dimeric structure via hydrogen bonding between the phenolate oxygen and the hydrogens of the coordinated H2O molecule. The theoretical calculations were also performed to optimize the structure of the complexes in the gas phase to confirm the structures proposed by X-ray crystallography. In addition, UV-Visible and IR spectra of complexes were calculated and compared with the corresponding experimental spectra to complete the experimental structural identification. The synthesized complexes were incorporated onto the Montmorillonite-K10 nanoclay via simple ion-exchange reaction. The structure and morphology of the obtained nanohybrids were identified by FT-IR, XRD, TGA/DTA, SEM and TEM techniques. Based on the XRD results of the new nanohybrid materials, the Schiff base complexes were intercalated in the interlayer spaces of clay. SEM and TEM micrographs of the clay/complex shows that the resulting hybrid nanomaterials has layer structures.
    Matched MeSH terms: Crystallography, X-Ray
  14. Abd Rahman RN, Ali MS, Sugiyama S, Leow AT, Inoue T, Basri M, et al.
    Protein Pept Lett, 2015;22(2):173-9.
    PMID: 25329331
    Geobacillus zalihae sp. nov., which produces a putative thermostable lipase, represents a novel species, with type strain T1. The characterisation of this intrinsically thermostable T1 lipase either physicochemically or structurally is an important task. The crystallisation of T1lipase in space was carried out using a High-Density Protein Crystal Growth (HDPCG) apparatus with the vapour diffusion method, and X-ray diffraction data were collected. The microgravity environment has improved the size and quality of the crystals as compared to earth grown crystal. The effect of microgravity on the crystallisation of T1 lipase was clearly evidenced by the finer atomic details at 1.35 A resolution. Better electron densities were observed overall compared with the Earth-grown crystals, and comparison shows the subtle but distinct conformations around Na(+) ion binding site stabilized via cation-π interactions. This approach could be useful for solving structure and function of lipases towards exploiting its potentials to various industrial applications.
    Matched MeSH terms: Crystallography, X-Ray
  15. Karim AH, Jalil AA, Triwahyono S, Kamarudin NH, Ripin A
    J Colloid Interface Sci, 2014 May 1;421:93-102.
    PMID: 24594037 DOI: 10.1016/j.jcis.2014.01.039
    Carbon nanotubes-mesostructured silica nanoparticles (CNT-MSN) composites were prepared by a simple one step method with various loading of CNT. Their surface properties were characterized by XRD, N2 physisorption, TEM and FTIR, while the adsorption performance of the CNT-MSN composites were evaluated on the adsorption of methylene blue (MB) while varying the pH, adsorbent dosage, initial MB concentration, and temperature. The CNTs were found to improve the physicochemical properties of the MSN and led to an enhanced adsorptivity for MB. N2 physisorption measurements revealed the development of a bimodal pore structure that increased the pore size, pore volume and surface area. Accordingly, 0.05 g L(-1) CNT-MSN was able to adsorb 524 mg g(-1) (qm) of 60 mg L(-1) MB at pH 8 and 303 K. The equilibrium data were evaluated using the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherm models, with the Langmuir model affording the best fit to the adsorption data. The adsorption kinetics were best described by the pseudo-first order model. These results indicate the potential of CNT-MSN composites as effective new adsorbents for dye adsorption.
    Matched MeSH terms: Crystallography, X-Ray
  16. Low YY, Gan CY, Kam TS
    J Nat Prod, 2014 Jun 27;77(6):1532-5.
    PMID: 24832351 DOI: 10.1021/np500289t
    Racemic andransinine (1), an indole alkaloid derivative obtained during isolation of alkaloids from Alstonia angustiloba and Kopsia pauciflora, was found to undergo spontaneous resolution when crystallized in EtOAc, forming racemic conglomerates (an equimolar mechanical mixture of enantiomerically pure individual crystals). X-ray analyses of the enantiomers (obtained from crystals from EtOAc solution and from chiral-phase HPLC) provided the absolute configuration of each enantiomer as (15R,16S,21R)-(+)-andransinine (1a or I+) and (15S,16R,21S)-(-)-andransinine (1b or I-).
    Matched MeSH terms: Crystallography, X-Ray
  17. Chidan Kumar CS, Panicker CY, Fun HK, Mary YS, Harikumar B, Chandraju S, et al.
    PMID: 24691363 DOI: 10.1016/j.saa.2014.02.185
    2-(4-Chlorophenyl)-2-oxoethyl 3-methylbenzoate is synthesized by reacting 4-chlorophenacyl bromide with 2-methylbenzoic acid using a slight excess of potassium or sodium carbonate in DMF medium at room temperature. The structure of the compound was confirmed by IR and single-crystal X-ray diffraction studies. FT-IR spectrum of 2-(4-chlorophenyl)-2-oxoethyl-3-nitrobenzoate was recorded and analyzed. The crystal structure is also described. The vibrational wavenumbers were computed using HF and DFT methods and are assigned with the help of potential energy distribution method. The first hyperpolarizability and infrared intensities are also reported. The geometrical parameters of the title compound obtained from XRD studies are in agreement with the calculated (DFT) values. The stability of the molecule arising from hyper-conjugative interaction and charge delocalization has been analyzed using NBO analysis. The HOMO and LUMO analysis are used to determine the charge transfer within the molecule. MEP was performed by the DFT method.
    Matched MeSH terms: Crystallography, X-Ray
  18. Arifin K, Minggu LJ, Daud WR, Yamin BM, Daik R, Kassim MB
    PMID: 24184623 DOI: 10.1016/j.saa.2013.09.069
    A new homoleptic dithiolene tungsten complex, tris-{1,2-bis(3,5-dimethoxyphenyl)-1,2-ethylenodithiolene-S,S'}tungsten, was successfully synthesized via a reaction of the thiophosphate ester and sodium tungstate. The thiophosphate ester was prepared from 3,5-dimethoxybenzaldehyde via benzoin condensation to produce the intermediate 1,2-bis-(3,5-dimethoxyphenyl)-2-hydroxy-ethanone compound, followed by a reaction of the intermediate with phosphorus pentasulfide. FTIR, UV-Vis spectroscopy, 1H NMR and 13C NMR and elemental analysis confirmed the product as tris{1,2-bis-(3,5-dimethoxyphenyl)-1,2-ethylenodithiolene-S,S'}tungsten with the molecular formula of C54H54O12S6W. Crystals of the product adopted a monoclinic system with space group of P2(1)/n, where a=12.756(2) Å, b=21.560(3) Å, c=24.980(4) Å and β=103.998(3)°. Three thioester ligands were attached to the tungsten as bidentate chelates to form a distorted octahedral geometry. Density functional theory calculations were performed to investigate the molecular properties in a generalized-gradient approximation framework system using Perdew-Burke-Ernzerhof functions and a double numeric plus polarization basis set. The HOMO was concentrated on the phenyl ligands, while the LUMO was found along the W(S2C2)3 rings. The theoretical optical properties showed a slight blue shift in several low dielectric solvents. The solvatochromism effect was insignificant for high polar solvents.
    Matched MeSH terms: Crystallography, X-Ray
  19. Taha M, Ismail NH, Jamil W, Yousuf S, Jaafar FM, Ali MI, et al.
    Molecules, 2013 Sep 05;18(9):10912-29.
    PMID: 24013406 DOI: 10.3390/molecules180910912
    2,4-Dimethylbenzoylhydrazones 1-30 were synthesized by condensation reactions of 2,4-dimethylbenzoylhydrazide with various aromatic aldehydes and characterized. The assigned structures of compounds 10, 15 and 22 were further supported by single-crystal X-ray diffraction data. The synthesized compounds were evaluated for their in vitro DPPH radical scavenging activity. They exerted varying degree of scavenging activity toward DPPH radical with IC₅₀ values between 25.6-190 µM. Compounds 1, 4, 2, 3, 7, and 6 have IC₅₀ values of 25.6, 28.1, 29.3, 29.8, 30.0 and 30.1 µM respectively, showing better activity than an n-propyl gallate standard (IC₅₀ value = 30.30 µM). For super oxide anion scavenging activity compounds 1, 2 and 3 with IC₅₀ values of 98.3, 102.6, and 105.6, respectively, also showed better activity than the n-propyl gallate standard (IC₅₀ value = 106.34 µM).
    Matched MeSH terms: Crystallography, X-Ray
  20. Nge CE, Gan CY, Low YY, Thomas NF, Kam TS
    Org. Lett., 2013 Sep 20;15(18):4774-7.
    PMID: 23991636 DOI: 10.1021/ol4021404
    Two new indole alkaloids, voatinggine (1) and tabertinggine (2), which are characterized by previously unencountered natural product skeletons, were isolated from a Malayan Tabernaemontana species. The structures and absolute configuration of these alkaloids were determined using NMR and MS analysis, and X-ray diffraction analysis. A possible biogenetic pathway to these novel alkaloids from an iboga precursor, and via a common cleavamine-type intermediate, is presented.
    Matched MeSH terms: Crystallography, X-Ray
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links