MyMedR

Displaying publications 21 - 40 of 52 in total

Abstract:

Sort:

Linking mesohabitat selection and ecological traits of a fish assemblage in a small tropical stream (Tinggi River, Pahang Basin) of the Malay Peninsula

Kano Y, Miyazaki Y, Tomiyama Y, Mitsuyuki C, Nishida S, Rashid ZA

Zoolog Sci, 2013 Mar;30(3):178-84.
PMID: 23480377 DOI: 10.2108/zsj.30.178

Mesohabitat selection in fluvial fishes was studied in a small tropical stream of the Malay Peninsula. A total of 681 individuals representing 24 species were sampled at 45 stations within heterogeneous stream (ca. 1 km in length), in which water depth, water velocity, substrate size, and riparian canopy cover were measured as environmental variables. A canonical correspondence analysis (CCA) yielded a diagram that shows a specific mesohabitat selection of the fish assemblage, in which the species were plotted widely on the CCA1-CCA2 biplot. Generalized linear model also revealed a significant pattern of the mesohabitat selection of several species. Water velocity and substrate size mainly separated on CCA1, indicating variation of pool (deep, slow-flow section) and riffle (shallow, fast-flow section) structures is a primary factor of mesohabitat selection in the fluvial fish assemblage. The mean body weight of species significantly correlated with CCA1; larger species tended to inhabit pools, while small ones occupied riffles. The riparian canopy cover separated on CCA2. The trophic level of species significantly correlated with CCA2; herbivorous species (low trophic level) selected open sites without riparian cover, whereas omnivorous/carnivorous (middle-high trophic level) species preferred highly covered sites. In conclusion, our results suggest that mesohabitat selection is closely related to the species feeding habit, which is consistent with the results of previous studies.

Matched MeSH terms: Human Activities
Human factors for a sustainable future

Thatcher A, Yeow PH

Appl Ergon, 2016 May 24.
PMID: 27234806 DOI: 10.1016/j.apergo.2016.05.007

Current human activities are seriously eroding the ability of natural and social systems to cope. Clearly we cannot continue along our current path without seriously damaging our own ability to survive as a species. This problem is usually framed as one of sustainability. As concerned professionals, citizens, and humans there is a strong collective will to address what we see as a failure to protect the natural and social environments that supports us. While acknowledging that we cannot do this alone, human factors and ergonomics needs to apply its relevant skills and knowledge to assist where it can in addressing the commonly identified problem areas. These problems include pollution, climate change, renewable energy, land transformation, and social unrest amongst numerous other emerging global problems. The issue of sustainability raises two fundamental questions for human factors and ergonomics: which system requires sustaining and what length of time is considered sustainable? In this paper we apply Wilson (2014) parent-sibling-child model to understanding what is required of an HFE sustainability response. This model is used to frame the papers that appear in this Special Issue.

Matched MeSH terms: Human Activities
River and fish pollution in Malaysia: A green ergonomics perspective

Poon WC, Herath G, Sarker A, Masuda T, Kada R

Appl Ergon, 2016 Feb 21.
PMID: 26911247 DOI: 10.1016/j.apergo.2016.02.009

Human activities, such as industrial, agricultural, and domestic pursuits, discharge effluents into riverine ecological systems that contains aquatic resources, such as fish, which are also used by humans. We conducted case studies in Malaysia to investigate the impacts of these human activities on water and fish resources, as well as on human well-being from an ergonomics perspective. This research shows that a green ergonomics approach can provide us with useful insights into sustainable relationships between humans and ecology in facilitating human well-being in consideration of the overall performance of the social-ecological system. Heavy metal concentrations contained in the effluents pollute river water and contaminate fish, eventually creating significant health risks and economic costs for residents, including the polluters. The study suggests a number of policy interventions to change human behavior and achieve greater collaboration between various levels of government, academia, civil society, and businesses to help establish sustainable relationships between humans and ecology in Malaysia.

Matched MeSH terms: Human Activities
Fulltext Phylogenetic Relatedness of Several Agarwood-Producing Taxa (Thymelaeaceae) from Indonesia

Lee SY, Turjaman M, Mohamed R

Trop Life Sci Res, 2018 Jul;29(2):13-28.
PMID: 30112138 MyJurnal DOI: 10.21315/tlsr2018.29.2.2

Indonesia is home to several tree taxa that are harvested for agarwood. This highly valuable oleoresin ironically was the cause for some species to become vulnerable due to gluttonous human activity. However, information on the genetic diversity of these endangered trees is limited. In this study, 28 specimens representing eight species from two genera, Aquilaria and Gyrinops, were collected from ex-situ and in-situ populations in Indonesia. Phylogenetic analysis conducted on DNA sequences of the nuclear ribosomal internal transcribed spacer (ITS) and the trnL-trnF intergenic spacer regions, revealed that Aquilaria and Gyrinops are paraphyletic when Aquilaria cumingiana is excluded. The phylogenetic analysis for ITS and trnL-trnF showed capability to categorise agarwood-producing species based on their regions: East Indonesia and West Indonesia, using Wallace's Line as the divider. In addition, we discuss challenges in species identification and taxonomy of agarwood-producing genera, and their conservation efforts in Indonesia.

Matched MeSH terms: Human Activities
Fulltext Heavy metals (mercury, arsenic, cadmium, plumbum) in selected marine fish and shellfish along the Straits of Malacca

Alina, M., Azrina, A., Mohd Yunus, A.S., Mohd Zakiuddin, S., Mohd Izuan Effendi, H., Muhammad Rizal, R.

International Food Research Journal, 2012;19(1):135-140.
MyJurnal

Level of heavy metals in marine ecosystem has been intensively studied during recent years as these hazardous substances could be accumulated in the biota. Generally, the presence of contaminants in fish is a result of human activities such as industrial and agricultural wastes. In this study, the marine fish and shellfish from the Straits of Malacca were analyzed using Inductively Coupled Plasma Optical Emission Spectrophotometer (ICP-OES) and Flow Injection Mercury System (FIMS) for Cd, As and Pb and Hg, respectively. The Straits of Malacca is one of the busiest shipping routes in the world that make the level of heavy metals potentially high besides the various industrial activities along the west region of Peninsular Malaysia. The range of heavy metals in samples were 1.0-3-6.5-3 µg/ g wet sample for Hg, 0.5-2-47-2 µg/ g wet sample for Cd, 0.01-0.39 µg/ g wet sample for Pb and 0.14-6.57 µg/ g wet sample for As. Most part of the values was below the permitted limit set by FAO/WHO 2004 as well as Food Act 1983 and Food Regulations 1985. Therefore it can be generalized that fish and shellfish from the Straits of Malacca are safe to consume in terms of these heavy metals concentrationand do not constitute a risk for human health.

Matched MeSH terms: Human Activities
Fulltext Impact of climate change on water resources: global and Malaysian scenarios

Mohd Armi, A.S., Afiza, A.S., Mohd Ramzi, A.

ASM Science Journal, 2012;6(2):149-151.
MyJurnal

Over the last century, the earth’s climate has changed. It is a serious global, long-term problem which involves complex interactions. A lot of evidence suggests that most of the observed factors contributing to the crisis over the last 50 years can be attributed to human activities. Malaysia has always been vulnerable to extreme climatic events such as typhoons, floods and drought. We expect climate change to exacerbate these vulnerabilities. To ensure, that our water resources will always be secure and ready for use. We need to create awareness in the public and the policy makers so that they will acknowledge that the climate change issue is real. They also need to accept that actions to adapt with our vulnerabilities should be immediately put in place. We can do this by integrating the various sector policies and securing the participation of all stakeholders in Malaysia and other countries.

Matched MeSH terms: Human Activities
Fulltext Global warming: can we do something?

Ghazally Ismail

ASM Science Journal, 2011;5(1):73-74.
MyJurnal

Human activity has ‘very likely’ been the primary cause of global warming since the start of the Industrial Revolution (18th–19th century). As a new player in industrial transformation, Malaysia can choose to ignore the warnings of global warming. blame. This may not augur well. Release of greenhouse gases have been categorically linked to climate change and global warming. In her march towards industrialization, Malaysia too has contributed to the release of greenhouse gases. Apart from those arising from natural sources, the industrial sector in Malaysia also releases other types of gases such as the fluorocarbons. This is evident from the worsening air quality in some of our cities. (Copied from article).

Matched MeSH terms: Human Activities
Managing cancer using community participatory approach

Khalib Abdul Latiff

Journal of Health Management, 2008;4(1):10-14.
MyJurnal

Researchers all over the world have continuously contributed knowledge on common human cancers and its related risks. Despite these mountains of information, the trend of cancer problems has not significantly declined and perhaps in certain occasion, it gradually increased affecting those who are previously known to be less risky'. Cancer is still identified to be one of the top leading killer worldwide and is also the main source of psychosocial burden of the community particularly to the caregiver' Its problems are expected to be further increased as human beings are constantly modified and manipulated by unpredictable and dynamic human activities and globalization phenomena. Furthermore, the current advances in cancer therapy and others clinical interventions are not always guaranteed of a permanent cure, improve survival or prognosis, sustainable compliances, prolonging life and improving quality of life, thus the mortality and its associated biological and management complications are still prevalence. (Copied from article).

Matched MeSH terms: Human Activities
The need of industrial and organizational psychologist in Malaysia

Shukran Abdul Rahman

Journal of Occupational Safety and Health, 2004;1(2):64-73.
MyJurnal

Psychology has been well-accepted for application in virtually all aspects of human activities, including making a living. Thus, the objective of this paper is to introduce the application of psychology at workplaces. Specifically this paper addresses the importance of the profession of Industrial and Organizational Psychologist in the increasingly advanced and industrious society of Malaysia. It highlights the areas that the professional cares for, as well as its roles and positions in the view of the nation’s needs. Besides that, this paper also stresses the essential issues that Industrial and Organizational Psychologist practicing in Malaysia should consider. In short, this paper advocates the need of having professionals to look into the well-being of individuals contributing towards making Malaysia a developed nation.

Matched MeSH terms: Human Activities
Fulltext Orangutans venture out of the rainforest and into the Anthropocene

Spehar SN, Sheil D, Harrison T, Louys J, Ancrenaz M, Marshall AJ, et al.

Sci Adv, 2018 06;4(6):e1701422.
PMID: 29963619 DOI: 10.1126/sciadv.1701422

Conservation benefits from understanding how adaptability and threat interact to determine a taxon's vulnerability. Recognizing how interactions with humans have shaped taxa such as the critically endangered orangutan (Pongo spp.) offers insights into this relationship. Orangutans are viewed as icons of wild nature, and most efforts to prevent their extinction have focused on protecting minimally disturbed habitat, with limited success. We synthesize fossil, archeological, genetic, and behavioral evidence to demonstrate that at least 70,000 years of human influence have shaped orangutan distribution, abundance, and ecology and will likely continue to do so in the future. Our findings indicate that orangutans are vulnerable to hunting but appear flexible in response to some other human activities. This highlights the need for a multifaceted, landscape-level approach to orangutan conservation that leverages sound policy and cooperation among government, private sector, and community stakeholders to prevent hunting, mitigate human-orangutan conflict, and preserve and reconnect remaining natural forests. Broad cooperation can be encouraged through incentives and strategies that focus on the common interests and concerns of different stakeholders. Orangutans provide an illustrative example of how acknowledging the long and pervasive influence of humans can improve strategies to preserve biodiversity in the Anthropocene.

Matched MeSH terms: Human Activities
Fulltext Ergonomic design optimization for train seat fit parameters

Teo Chuun, B., Dian Darina Indah, D., Darliana, M.

Malaysian Journal of Public Health Medicine, 2018;18(102):73-78.
MyJurnal

This study is aimed at seat design optimization for high-speed train based on the Malaysians sitting anthropometry
data focusing on seat fit parameters. An analysis of anthropometry data composed of 15 dimensions that are
required in seat design was done with 50 male subjects. These data were collected through direct measuring
methods with standard equipment. According to the Malaysian automotive seat fit parameters, the backrest width,
backrest height, cushion width, and cushion length were established based on these anthropometric dimensions:
interscye breadth (5th percentile female and 95th percentile male), hip breadth (95th percentile female), sitting
shoulder height (5th percentile female), and buttock-popliteal length (5th percentile female), respectively. This
study uses the CATIA software to design and analyse the proposed seat design. The fit parameters proposed for the
new design are seat height, 380mm; cushion width, 450mm; backrest width, 450mm and backrest height, 850mm.
The CATIA human activity analysis (based on Rapid Upper Limb Analysis, RULA) was also executed. From the study,
the new conceptual seat design gives the most optimized fit when compared to the current seat.

Matched MeSH terms: Human Activities
Fulltext Conceptualizing a Sustainable Food System in an Automated World: Toward a "Eudaimonian" Future

Shepon A, Henriksson PJG, Wu T

Front Nutr, 2018;5:104.
PMID: 30456214 DOI: 10.3389/fnut.2018.00104

The industrialized world has entered a new era of widespread automation, and although this may create long-term gains in economic productivity and wealth accumulation, many professions are expected to disappear during the ensuing shift, leading to potentially significant disruptions in labor markets and associated socioeconomic difficulties. Food production, like many other industrial sectors, has also undergone a century of mechanization, having moved toward increasingly large-scale monoculture production-especially in developed economies-with higher yields but detrimental environmental impacts on a global scale. Certain characteristics of the food sector and its products cast doubts on whether future automation will influence it in the same ways as in other sectors. We conceptualize a model of future food production within the socioeconomic conditions created by widespread automation. We ideate that despite immediate shocks to the economy, in the long run higher productivity can free up human activity to be channeled toward more interactive, skill-intensive food production systems, where communal efforts can reduce industrial reliance, diversify farming, and reconnect people to the biosphere-a realization of human well-being that resembles the classical philosophical ideal of Eudaimonia. We explore food production concepts, such as communal gardens and polyculture, and the economic conditions and institutions needed to underwrite them [e.g., a universal basic income (UBI)]. However, arguments can be raised as to why social-ecological systems would benefit from more labor-intensive food production. In this paper we: (1) discuss the current state of the food system and the need to reform it in light of its environmental and social impacts; (2) present automation as a lever that could move society toward more sustainable food production; (3) highlight the beneficial attributes of a Eudaimonian model; and (4) discuss the potential challenges to its implementation. Our purpose is to highlight a possible outcome that future research will need to refine and expand based on evidence and successful case studies. The ultimate aim is to promote a food system that can provide food security while staying within the safe operating space of planetary boundaries, produce more nutritious diets, enhance social capital, and reconnect communities with the biosphere.

Matched MeSH terms: Human Activities
Fulltext 10Po, 210Pb and 210Po/210Pb in sediment core from surrounding Sungai Linggi estuary

Zal U’yun Wan Mahmood, Mei, Wo Yii, Abdul Kadir Ishak

Jurnal Sains Nuklear Malaysia, 2016;28(1):1-8.
MyJurnal

This study was performed to observe the variation in the distribution of 210Po,210Pb and 210Po/210Pb activity ratio throughtheir vertical profile of the sediment cores takenat surrounding Sungai Linggi estuary. Five sediment cores were takenin February 2011 and were cutto an intervalof 2 cm layer. Activity concentrations of 210Po and 210Pb were determined using alpha radiochemical analysis and gamma direct measurement, respectively. Generally, the measured activity of 210Po, 210Pb and 210Po/210Pbwere in the ranges of 22.73 –139.06 Bqkg-1dw., 37.88 –176.24 Bqkg-1dw.and 0.23 –1.34, respectively. The variation in the distribution profile for the radionuclides are believed to be influencedby human activities such as agriculture, fertilizer, vehicles, burned fuel fossil and forest, industrialand others via river input from land-base.Other factor is due to organic mattercontent played importantrole as the geochemical carrier to transportthose radionuclides at study area. It was provedthat hasa strong correlation between the radionuclide distribution and the sedimentcomposition of organic matter.Furthermore, in those rangesreflectedthat 210Pb activities were higher than210Po with an activity ratio average of 0.79. This is probably due to dramatic increase of excess 210Pb supplied from atmospheric deposition, in situ decay of 226Ra and as a result of diagenetic remolibilazationof 210Pbin deeper layesof the sediment column. Thus, thosefactors are majorcontributions on thevariation of 210Po and 210Pb in the sediment core at surrounding Sungai Linggi estuary.

Matched MeSH terms: Human Activities
Fulltext Classification of Human Daily Activities Using Ensemble Methods Based on Smartphone Inertial Sensors

Ku Abd Rahim KN, Elamvazuthi I, Izhar LI, Capi G

Sensors (Basel), 2018 Nov 26;18(12).
PMID: 30486242 DOI: 10.3390/s18124132

Increasing interest in analyzing human gait using various wearable sensors, which is known as Human Activity Recognition (HAR), can be found in recent research. Sensors such as accelerometers and gyroscopes are widely used in HAR. Recently, high interest has been shown in the use of wearable sensors in numerous applications such as rehabilitation, computer games, animation, filmmaking, and biomechanics. In this paper, classification of human daily activities using Ensemble Methods based on data acquired from smartphone inertial sensors involving about 30 subjects with six different activities is discussed. The six daily activities are walking, walking upstairs, walking downstairs, sitting, standing and lying. It involved three stages of activity recognition; namely, data signal processing (filtering and segmentation), feature extraction and classification. Five types of ensemble classifiers utilized are Bagging, Adaboost, Rotation forest, Ensembles of nested dichotomies (END) and Random subspace. These ensemble classifiers employed Support vector machine (SVM) and Random forest (RF) as the base learners of the ensemble classifiers. The data classification is evaluated with the holdout and 10-fold cross-validation evaluation methods. The performance of each human daily activity was measured in terms of precision, recall, F-measure, and receiver operating characteristic (ROC) curve. In addition, the performance is also measured based on the comparison of overall accuracy rate of classification between different ensemble classifiers and base learners. It was observed that overall, SVM produced better accuracy rate with 99.22% compared to RF with 97.91% based on a random subspace ensemble classifier.

Matched MeSH terms: Human Activities
Correlation and persistence of hunting and logging impacts on tropical rainforest mammals

Brodie JF, Giordano AJ, Zipkin EF, Bernard H, Mohd-Azlan J, Ambu L

Conserv Biol, 2015 Feb;29(1):110-21.
PMID: 25196079 DOI: 10.1111/cobi.12389

Humans influence tropical rainforest animals directly via exploitation and indirectly via habitat disturbance. Bushmeat hunting and logging occur extensively in tropical forests and have large effects on particular species. But how they alter animal diversity across landscape scales and whether their impacts are correlated across species remain less known. We used spatially widespread measurements of mammal occurrence across Malaysian Borneo and recently developed multispecies hierarchical models to assess the species richness of medium- to large-bodied terrestrial mammals while accounting for imperfect detection of all species. Hunting was associated with 31% lower species richness. Moreover, hunting remained high even where richness was very low, highlighting that hunting pressure persisted even in chronically overhunted areas. Newly logged sites had 11% lower species richness than unlogged sites, but sites logged >10 years previously had richness levels similar to those in old-growth forest. Hunting was a more serious long-term threat than logging for 91% of primate and ungulate species. Hunting and logging impacts across species were not correlated across taxa. Negative impacts of hunting were the greatest for common mammalian species, but commonness versus rarity was not related to species-specific impacts of logging. Direct human impacts appeared highly persistent and lead to defaunation of certain areas. These impacts were particularly severe for species of ecological importance as seed dispersers and herbivores. Indirect impacts were also strong but appeared to attenuate more rapidly than previously thought. The lack of correlation between direct and indirect impacts across species highlights that multifaceted conservation strategies may be needed for mammal conservation in tropical rainforests, Earth's most biodiverse ecosystems.

Matched MeSH terms: Human Activities
The Genus Cladophora Kützing (Ulvophyceae) as a Globally Distributed Ecological Engineer

Zulkifly SB, Graham JM, Young EB, Mayer RJ, Piotrowski MJ, Smith I, et al.

J Phycol, 2013 Feb;49(1):1-17.
PMID: 27008383 DOI: 10.1111/jpy.12025

The green algal genus Cladophora forms conspicuous nearshore populations in marine and freshwaters worldwide, commonly dominating peri-phyton communities. As the result of human activities, including the nutrient pollution of nearshore waters, Cladophora-dominated periphyton can form nuisance blooms. On the other hand, Cladophora has ecological functions that are beneficial, but less well appreciated. For example, Cladophora has previously been characterized as an ecological engineer because its complex structure fosters functional and taxonomic diversity of benthic microfauna. Here, we review classic and recent literature concerning taxonomy, cell biology, morphology, reproductive biology, and ecology of the genus Cladophora, to examine how this alga functions to modify habitats and influence littoral biogeochemistry. We review the evidence that Cladophora supports large, diverse populations of microalgal and bacterial epiphytes that influence the cycling of carbon and other key elements, and that the high production of cellulose and hydrocarbons by Cladophora-dominated periphyton has the potential for diverse technological applications, including wastewater remediation coupled to renewable biofuel production. We postulate that well-known aspects of Cladophora morphology, hydrodynamically stable and perennial holdfasts, distinctively branched architecture, unusually large cell and sporangial size and robust cell wall construction, are major factors contributing to the multiple roles of this organism as an ecological engineer.

Matched MeSH terms: Human Activities
Review of chitosan composite as a heavy metal adsorbent: Material preparation and properties

Begum S, Yuhana NY, Md Saleh N, Kamarudin NHN, Sulong AB

Carbohydr Polym, 2021 May 01;259:117613.
PMID: 33673980 DOI: 10.1016/j.carbpol.2021.117613

A large amount of wastewater is typically discharged into water bodies and has extremely harmful effects to aquatic environments. The removal of heavy metals from water bodies is necessary for the safe consumption of water and human activities. The demand for seafood has considerably increased, and millions of tons of crustacean waste are discarded every year. These waste products are rich in a natural biopolymer known as chitin. The deacetylated form of chitin, chitosan, has attracted attention as an adsorbent. It is a biocompatible and biodegradable polymer that can be modified and converted to various derivatives. This review paper focuses on relevant literature on strategies for chemically modifying the biopolymer and its use in the removal of heavy metals from water and wastewater. The different aspects of chitosan-based derivatives and their preparation and application are elucidated. A list of chitosan-based composites, along with their adsorptivity and experimental conditions, are compiled.

Matched MeSH terms: Human Activities
Fulltext Fractionation of as, co, cu and zn by sequential extraction in surface sediment of Kuala Terengganu river estuary

Muhammad Nazirul Mubin Abd Halim Shah, Lee, Siang Hing, Mohd Yusoff Nurulnadia, Meng, Chuan Ong

Malaysian Journal of Applied Sciences, 2020;5(2):57-68.
MyJurnal

Development and urbanization processes around Terengganu River estuary are expected to release a significant amount of heavy metals into the existing surface sediment. However, information on how and why these metals are attached into specific fraction of sediments is still lacking. Therefore, this study aimed to explain the heavy metal concentration distribution in each available fraction in Terengganu River estuary. In this study, nine surface sediments originated from various human activities area in Terengganu River estuary were collected during four different sampling sessions in 2017. Heavy metal content from the collected sediments were extracted using 3-steps BCR sequential extraction method followed by detection using Inductively Coupled Plasma Mass-Spectrometer (ICP-MS) and we discovered that the total concentration of arsenic (As), cobalt (Co), copper (Cu), and zinc (Zn) ranged from 2.18 to 17.48 mg/kg dry wt., 2.53 to 20.53 mg/kg dry wt., 1.01 to 13.13 mg/kg dry wt., and 6.10 to 65.71 mg/kg dry wt., respectively. Dominance of metals in each fraction can be arranged as follows: As: residual > reducible > exchangeable > oxidizable; Co: residual > exchangeable > reducible > oxidizable; Cu: residual > oxidizable > reducible > exchangeable; Zn: residual > exchangeable > reducible > oxidizable. Availability of metals in the sediment at Terengganu River estuary is limited since that majority of metals resides in non-mobilisable fraction of the sediment. In essence, the sequential extraction provides information regarding the metals’ fractionation, availability and mobility, which could be used in assessing the environmental contamination in the area.

Matched MeSH terms: Human Activities
ADA-SR: Activity detection and analysis using security robots for reliable workplace safety

Zhang G, Jing W, Tao H, Rahman MA, Salih SQ, Al-Saffar A, et al.

Work, 2021;68(3):935-943.
PMID: 33612535 DOI: 10.3233/WOR-203427

BACKGROUND: Human-Robot Interaction (HRI) has become a prominent solution to improve the robustness of real-time service provisioning through assisted functions for day-to-day activities. The application of the robotic system in security services helps to improve the precision of event detection and environmental monitoring with ease.
OBJECTIVES: This paper discusses activity detection and analysis (ADA) using security robots in workplaces. The application scenario of this method relies on processing image and sensor data for event and activity detection. The events that are detected are classified for its abnormality based on the analysis performed using the sensor and image data operated using a convolution neural network. This method aims to improve the accuracy of detection by mitigating the deviations that are classified in different levels of the convolution process.
RESULTS: The differences are identified based on independent data correlation and information processing. The performance of the proposed method is verified for the three human activities, such as standing, walking, and running, as detected using the images and sensor dataset.
CONCLUSION: The results are compared with the existing method for metrics accuracy, classification time, and recall.

Matched MeSH terms: Human Activities
Fulltext Diversity and host associations of Myrsidea chewing lice (Phthiraptera: Menoponidae) in the tropical rainforest of Malaysian Borneo

Madrid RS, Sychra O, Benedick S, Edwards DP, Efeykin BD, Fandrem M, et al.

Int J Parasitol Parasites Wildl, 2020 Dec;13:231-247.
PMID: 33294362 DOI: 10.1016/j.ijppaw.2020.10.011

The tropical rainforests of Sundaland are a global biodiversity hotspot increasingly threatened by human activities. While parasitic insects are an important component of the ecosystem, their diversity and parasite-host relations are poorly understood in the tropics. We investigated parasites of passerine birds, the chewing lice of the speciose genus MyrsideaWaterston, 1915 (Phthiraptera: Menoponidae) in a natural rainforest community of Malaysian Borneo. Based on morphology, we registered 10 species of lice from 14 bird species of six different host families. This indicated a high degree of host specificity and that the complexity of the system could be underestimated with the potential for cryptic lineages/species to be present. We tested the species boundaries by combining morphological, genetic and host speciation diversity. The phylogenetic relationships of lice were investigated by analyzing the partial mitochondrial cytochrome oxidase I (COI) and the nuclear elongation factor alpha (EF-1α) genes sequences of the species. This revealed a monophyletic group of Myrsidea lineages from seven hosts of the avian family Pycnonotidae, one host of Timaliidae and one host of Pellorneidae. However, species delimitation methods supported the species boundaries hypothesized by morphological studies and confirmed that four species of Myrsidea are not single host specific. Cophylogenetic analysis by both distance-based test ParaFit and event-based method Jane confirmed overall congruence between the phylogenies of Myrsidea and their hosts. In total we recorded three cospeciation events for 14 host-parasite associations. However only one host-parasite link (M. carmenae and their hosts Terpsiphone affinis and Hypothymis azurea) was significant after the multiple testing correction in ParaFit. Four new species are described: Myrsidea carmenaesp.n. ex Hypothymis azurea and Terpsiphone affinis, Myrsidea franciscaesp.n. ex Rhipidura javanica, Myrsidea ramonisp.n. ex Copsychus malabaricus stricklandii, and Myrsidea victoriaesp.n. ex. Turdinus sepiarius.

Matched MeSH terms: Human Activities

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links