Displaying publications 21 - 40 of 162 in total

Abstract:
Sort:
  1. Idris A, Saed K
    J Hazard Mater, 2002 Jul 22;93(2):201-8.
    PMID: 12117466
    Ash produced from a hospital waste incinerator was treated using a high temperature melting process at 1200 degrees C. The quality of the produced slag was characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), leaching tests and sequential chemical extraction of metals. The slag contained large amounts of SiO(2,) CaO, Al(2)O(3), Sn, Ni, Cu, Ba and B. XRD analysis revealed a moderate crystal structure for the melted slag and identified the main crystals as quartz (SiO(2)), kaolinite (Al(2)Si(2)O(5)(OH)(4)), albite (NaAlSi(3)O(8)) and gibbsite (Al(OH)(3)). The observed crystal structure assists in preventing the leaching of heavy metals from the slag. Furthermore, the leaching results found the produced slag to comply with disposal limits set by the US EPA. Results from sequential chemical extraction analysis showed that metals in the slag exhibited the strongest preference to be bound to the residual fraction (stable fraction), which is known to have very low leaching characteristics. Melting was found to stabilize heavy metals in hospital waste successfully and therefore it can be an acceptable method for disposal.
    Matched MeSH terms: Metals, Heavy/analysis*
  2. Chan YM, Agamuthu P, Mahalingam R
    J Hazard Mater, 2000 Oct 02;77(1-3):209-26.
    PMID: 10946129
    Currently, the generated brake lining waste dust, which contains asbestos as its major component, is disposed of into a secure landfill without any additional treatment. As an alternative to this, solidification/stabilization (S/S) disposal of the dust was investigated using Portland cement alone and Portland cement mixed with activated carbon (AC), as the binders. Toxicity Characteristics Leaching Procedure (TCLP) results on the solidified matrix showed that cement was able to immobilize the heavy metals, Ba, Zn, Cr, Pb, Cu and Fe, to within the limits set by the US EPA for TCLP. Addition of AC to the cement reduced the leaching of heavy metals by an additional 4-24% compared to cement alone. The pH of the TCLP leachate extracted from virgin cement, and from dust treated with cement with or without AC was found to increase to 10.9-12.5 as opposed to an initial value of 4.93 for the TCLP extract for the untreated dust. Results of ANS 16.1 (modified) leach protocol revealed that Ba in cement-treated samples showed the highest leach rate, followed by Zn, Pb, Cr, Cu and Fe. The leach rate of heavy metals decreased with progress in time. Cement mixed with AC exhibited similar leach characteristics, however, the leach rate was lower. The linear relationship between the cumulative fraction leached (CFL) and the square root of leaching time in all cement-based samples indicate that a diffusional process is the controlling transport mechanism for the leaching of the heavy metals. The obtained Leachability Indices (L(i)) of 7.6-9.1 and 8.3-9.5 for cement and cement with AC, respectively, were low but exceeded the guidance value of 6, which clearly indicates that all the heavy metals studied are retained well within solid matrices. Cement-based S/S hardening times increased from 30 to 96 h as the dust content increased from 40 to 70 wt.%. The resulting solid matrices exhibited a compressive strength ranging from 1 to 12 MPa, which was well above the specified limit of 414 kPa for such matrices. An economic analysis indicates that the disposal costs for the dust in the only available secure landfill would increase by 40.3% if one were to go for the cement S/S option. Addition of AC to the cement would escalate this by an additional 43.8%. Although the S/S of brake lining dust using cement effectively immobilized the heavy metals of concern, cost considerations may hinder the commercial adaptation of this technique for waste disposal unless new regulatory demands are implemented.
    Matched MeSH terms: Metals, Heavy/analysis
  3. Janaydeh M, Ismail A, Zulkifli SZ, Omar H
    Environ Monit Assess, 2019 Sep 16;191(10):637.
    PMID: 31529162 DOI: 10.1007/s10661-019-7755-y
    Cadmium (Cd) and lead (Pb) are ubiquitous metals widely distributed in the environment, resulting in toxic health effects. This project aims to evaluate Pb and Cd as toxic elements in 15 different tobacco cigarette brands produced and/or sold in Selangor state, Peninsular Malaysia. The concentrations of Pb and Cd in all tobacco brands tested in this study were determined using the air-acetylene flame atomic absorption spectrophotometer (AAS). On average, the concentrations of Pb and Cd in different tobacco brand samples ranged from 3.05 and 0.80 μg/g dw, respectively. The results indicate that assessment mean values of Pb inhaled from smoking one packet of 20 cigarettes were in the range of 1.55-3.51 μg. Furthermore, the concentration of Cd inhaled per packet of cigarettes (20 sticks) is estimated to be 0.04-0.36 μg. However, there was a significant difference in the concentrations of Pb and Cd between the different brands of tobacco cigarettes, among cigarette prices (cheap versus expensive) of tobacco brands. In conclusion, cigarette smokers in Selangor, Malaysia, are heavily exposed to Pb and Cd, and such exposure could adversely affect their health in the long term. The impact of toxic heavy metals on smokers in this state would be an area for future research.
    Matched MeSH terms: Metals, Heavy/analysis
  4. Ahmad A, Sreedhar Reddy S, Rumana G
    Int J Phytoremediation, 2019;21(5):471-478.
    PMID: 30648407 DOI: 10.1080/15226514.2018.1537243
    To assess the tolerance, the rye-grass L. grown on soil amended with petroleum wastewater (PWW) containing four metals lead, zinc, nickel and mercury. The PWW (25 to 50%) showed remarkable increase in length and biomass. Chlorophyll 'a and b' increased with an increase of PWW from 25-50% while such contents decreased on increasing the 75-100% compared to control. The mass balance performed on the system showed the removal of 90-97.6% lead, 85.5-92.9% zinc, 78.9-85.5% nickle and 47.6-27.5% mercury. The model for the maximum metal reduction rate (Rmax) was much better for Pb (89.5) and Zn (72.1) with respect to Ni (57.3) and Hg (32.4). Survival of rye-grass (30-days, statics, and renewal exposures) was increased by 50% as compared to control. The toxicity index Y of PWW showed 0-25% deficiency level, 25-50% tolerance level, 50-90% toxic level and 90-100% lethal level. The experimental data showing high correlation coefficient (R2 = 0.98).
    Matched MeSH terms: Metals, Heavy/analysis*
  5. Sow AY, Ismail A, Zulkifli SZ, Amal MN, Hambali KA
    Sci Rep, 2019 04 23;9(1):6391.
    PMID: 31015502 DOI: 10.1038/s41598-019-42753-2
    This work investigates the metals concentration in the tissues of Asian swamp eel, Monopterus albus. Five selected tissues, including liver, gill, bone, skin, and muscle were examined for the concentration of Zn, Cu, Cd, Pb, and Ni. The concentrations of Cd and Pb were found high in the muscle tissues of the eels. Additionally, high amounts of Zn and Cu metals were observed in the liver, whereas the Cd, Pb, and Ni metals were highly detected in gill. The accumulation of Zn, Cu, Cd, Pb, and Ni in both skin and bone of the eel seems to vary between seasons. Low levels of Zn, Cu, and Ni were identified in the muscle tissues of the eels. This study revealed that the concentration of Cd and Pb in the muscle tissues of Asian swamp eels exceeded the permissible limits by the US EPA, suggesting the consumption of the muscle may be hazardous and can severely affect one's health.
    Matched MeSH terms: Metals, Heavy/analysis*
  6. Sutirman ZA, Sanagi MM, Wan Aini WI
    Int J Biol Macromol, 2021 Mar 31;174:216-228.
    PMID: 33516856 DOI: 10.1016/j.ijbiomac.2021.01.150
    The presence of heavy metal and radionuclides in water bodies has been a long-lasting environmental problem which results in many undesirable consequences. In this framework, the biosorption process, which uses inexpensive and naturally produced material such as alginate, is an alternative technology in the environmental remediation. This review provides relevant and recent literature regarding the application of alginate and its derivatives on removal of various heavy metal ions and radionuclides. The effects of process variables such as solution pH, adsorbent dosage, metal ion concentration, contact time, temperature and co-existing ions used in batch studies in addition to kinetic, isothermal models as well as thermodynamic that fit the adsorption experimental data are critically discussed. This review also includes mechanisms involved during adsorption process. Furthermore, future research needs for the removal of contaminants by alginate-based materials with the aims of improving their adsorption performance and their practical applications are commented.
    Matched MeSH terms: Metals, Heavy/analysis*
  7. Azrina A, Khoo HE, Idris MA, Amin I, Razman MR
    Malays J Nutr, 2011 Aug;17(2):271-6.
    PMID: 22303580 MyJurnal
    Quality drinking water should be free from harmful levels of impurities such as heavy metals and other inorganic elements.
    Matched MeSH terms: Metals, Heavy/analysis*
  8. Qamar Z, Haji Abdul Rahim ZB, Chew HP, Fatima T
    J Pak Med Assoc, 2017 Jan;67(1):116-120.
    PMID: 28065967
    Dental enamel, an avascular, irreparable, outermost and protective layer of the human clinical crown has a potential to withstand the physico-chemical effects and forces. These properties are being regulated by a unique association among elements occurring in the crystallites setup of human dental enamel. Calcium and phosphate are the major components (hydroxyapatite) in addition to some trace elements which have a profound effect on enamel. The current review was planned to determine the aptitude of various trace elements to substitute and their influence on human dental enamel in terms of physical and chemical properties.
    Matched MeSH terms: Metals, Heavy/analysis
  9. Najiah M, Nadirah M, Lee KL, Lee SW, Wendy W, Ruhil HH, et al.
    Vet Res Commun, 2008 Jun;32(5):377-81.
    PMID: 18369732 DOI: 10.1007/s11259-008-9045-y
    Slipper oyster Crassostrea iredalei is a species of good demand for its sweet flavor and white coloured flesh. The filter feeding nature predisposes oysters to accumulation of pathogenic and heavy metals in waters impacted by sewage pollutions and may thus render the oysters unfit for human consumption. A study was undertaken to investigate the presence of bacteria flora and heavy metal concentrations in cultivated oysters Crassostrea iredalei at Setiu Wetland, Terengganu, the only source of cultivated oysters in East Coast of Malaysia. A total of 200 slipper oyster samples were analyzed. The bacteria were isolated using non selective agar such as TSA agar and selective agars before they were then identified using conventional methods in combination with BBL Crystal identification kit. Heavy metals such as zinc (Zn), copper (Cu), cadmium (Cd), and lead (Pb) concentrations were determined using atomic absorption spectrophotometry. Results showed that the oysters harbor predominantly Shewanella putrifaciens followed by Vibrio parahaemolyticus, Vibrio vulnificus, Vibrio cholerae, Enterobacter cloacae, Escherichia coli and Chromobacterium violaceum. They also contain high concentration of Zn (785.68 +/- 285.88 microg/g) with the lowest heavy metal was Pb (0.17 +/- 0.15 microg/g), whilst the concentrations of other heavy metals were Cu (38.9 +/- 13.2 microg/g) and Cd (1.60 +/- 0.28 microg/g). The study is very useful to evaluate the type of bacteria and heavy metal present in oyster meat for human consumption.
    Matched MeSH terms: Metals, Heavy/analysis*
  10. Wang AJ, Bong CW, Xu YH, Hassan MHA, Ye X, Bakar AFA, et al.
    Mar Pollut Bull, 2017 Dec 15;125(1-2):492-500.
    PMID: 28807422 DOI: 10.1016/j.marpolbul.2017.08.010
    To understand the source-to-sink of pollutants in the Kelantan River estuary and the adjacent shelf area in Malaysia, a total of 42 surface sediment samples were collected in the Kelantan River-estuary-shelf system to analyze for grain size, total organic carbon (TOC) content, Al and heavy metals (Cr, Ni, Cu, Zn, Cd and Pb). The surficial sediments were mainly composed of clayey silt and the TOC content in sediments decreased from the river to the shelf. The surficial sediments experienced Pb pollution; Cr only showed a certain level of pollution in the coastal area of the estuary but not in other areas, and Ni, Cu, Zn, and Cd showed no pollution. The heavy metals mainly originated from natural weathering and erosion of rocks and soils in the catchment and enriched near the river mouth. Total organic carbon can promote the enrichment of heavy metals in sediments.
    Matched MeSH terms: Metals, Heavy/analysis*
  11. Diami SM, Kusin FM, Madzin Z
    Environ Sci Pollut Res Int, 2016 Oct;23(20):21086-21097.
    PMID: 27491419
    The composition of heavy metals (and metalloid) in surface soils of iron ore mine-impacted areas has been evaluated of their potential ecological and human health risks. The mining areas included seven selected locations in the vicinity of active and abandoned iron ore-mining sites in Pahang, Malaysia. Heavy metals such as Fe, Mn, Cu, Zn, Co, Pb, Cr, Ni, and Cd and metalloid As were present in the mining soils of the studied area, while Cu was found exceeding the soil guideline value at all sampling locations. However, the assessment of the potential ecological risk index (RI) indicated low ecological risk (RI between 44 and 128) with respect to Cd, Pb, Cu, As, Zn, Co, and Ni in the surface soils. Contributions of potential ecological risk [Formula: see text]by metal elements to the total potential ecological RI were evident for Cd, As, Pb, and Cu. Contribution of Cu appears to be consistently greater in the abandoned mining area compared to active iron ore-mining site. For non-carcinogenic risk, no significant potential health risk was found to both children and adults as the hazard indices (HIs) were all below than 1. The lifetime cancer risk (LCR) indicated that As has greater potential carcinogenic risk compared to other metals that may induce carcinogenic effects such as Pb, Cr, and Cd, while the LCR of As for children fell within tolerable range for regulatory purposes. Irrespective of carcinogenic or non-carcinogenic risk, greater potential health risk was found among children (by an order of magnitude higher for most metals) compared to adults. The hazard quotient (HQ) and cancer risk indicated that the pathways for the risk to occur were found to be in the order of ingestion > dermal > inhalation. Overall, findings showed that some metals and metalloid were still present at comparable concentrations even long after cessation of the iron ore-mining activities.
    Matched MeSH terms: Metals, Heavy/analysis*
  12. Salih NF, Jafri ZM, Jaafar MS
    Environ Sci Pollut Res Int, 2016 Dec;23(23):23662-23674.
    PMID: 27619370
    This study was carried out to determine the concentration of (222)Rn, (226)Ra, and (238)U in 25 different toothpastes available in the local market in Penang, Malaysia, using a CR-39 detector. The results showed the maximum concentration of radon/ radium/uranium to be 4197.644 Bq.m(-3), 54.369 Bq.Kgm(-1), and 0.044 ppm in Colgate4; the annual effective dose was found (0.402 mSvy(-1)) in S07. The average concentration of radon (42 %, 3.224 KBq.m(-3)) was higher than the concentration of (214)Po, (218)Po in POS (32 %, 2.415 KBq.m(-3)) and POW (26 %, 1.979 KBq.m(-3)). Also the values of pH of samples ranged from 4.21 (highly acidic) in S04 to 9.97 (highly basic) in S07, with an average of 6.33 which tended towards an acidic behavior; a low or high pH for a long period of time can cause harmful side-effects and enamel erosion. Concentrations of heavy metals varied from the maximum value 56.156 ppm in the Ca elements in the Colgate 4 sample to a minimum value of -0.858 ppm in the Cd elements in Colgate 6 (Ca 56.156 ppm > Cd 51.572 ppm > Zn 41.039 ppm > Mg 11.682 ppm > Pb 11.009 ppm]. Monitoring the accumulation of these metals in toothpaste samples is very important: the average annual effective dose (0.3118 mSvy(-1)) was below the range (3-10 mSvy(-1)) reported by ICRP (1993), and therefore there is no evidence of health problems. Significant strong positive correlations were found (r = 1, Pearson correlation, p 
    Matched MeSH terms: Metals, Heavy/analysis*
  13. Arumugam A, Li J, Krishnamurthy P, Jia ZX, Leng Z, Ramasamy N, et al.
    Environ Sci Pollut Res Int, 2020 Jun;27(16):19955-19969.
    PMID: 32232757 DOI: 10.1007/s11356-020-08554-1
    Increasing toxic metal content in aquatic products has become a universal burden due to the risks to aquatic organisms and human health associated with the consumption of these products. In this study, toxic metal distribution and accumulation in the organs of fish and bivalve species of economic and culinary importance from the lower reaches of the Yangtze River are examined, and the corresponding health risks are also investigated. In general, the viscera and gill show higher concentration of metals than other tissues. The order of the accumulation sequence of metals in muscle tissue of fish and bivalve is Zn > Cu > Mn > Cr > As > Hg > Pb > Cd and Mn > Zn > Cu > As > Cr > Pb > Cd > Hg respectively. Maximum accumulation of Mn (507.50 μg g-1) and Pb (0.51 μg g-1) in the gill tissues indicates the major uptake of these metals from the water column. According to the Hazard Index (HI) calculations (based on USEPA), the analyzed metals will not cause any harmful health effects to individuals for both normal and habitual fish consumers, except for Hg and As in habitual consumers, if these species are consumed at a larger amount. Compared to the Chinese Food Health Criterion and other international standards (WHO/FAO), metal concentrations in the edible muscle tissues of the studied species are lesser than the acceptable levels and found to be fit for human consumption.
    Matched MeSH terms: Metals, Heavy/analysis*
  14. Sarker KK, Bristy MS, Alam N, Baki MA, Shojib FH, Quraishi SB, et al.
    Environ Sci Pollut Res Int, 2020 Sep;27(25):31827-31840.
    PMID: 32504432 DOI: 10.1007/s11356-020-09384-x
    The study aimed to determine eight hazardous heavy metals in surface water and sediment samples collected from the Naf River, Shah Porir Dwip (estuary), and mostly around Saint Martin's Island in the Bay of Bengal. The results of heavy metals in water samples were ranged as Pb 14.7-313.0, Cd 33.0-70.0, Cr
    Matched MeSH terms: Metals, Heavy/analysis*
  15. Kamaruzzaman BY, Zahir MS, John BA, Waznah AS, Jalal KC, Shahbudin S, et al.
    Pak J Biol Sci, 2010 Dec 15;13(24):1208-13.
    PMID: 21313902
    An effort to analyze selected heavy metal accumulation by the razor clam (Solen brevis) from Tanjung Lumpur was conducted on January to April 2010. A total of fifty individuals of Razor clam Solen brevis were sampled and metals such as Iron (Fe), Zinc (Zn), Copper (Cu), Manganese (Mn), Lead (Pb) and Cadmium (Cd) Concentrations were determined using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Among the metals Fe occurred in elevated concentration in the soft tissue of razor clam followed by Zn. Cd was found to be in least concentration in the sample. Mean concentration of Fe, Zn, Mn, Cu, Cd and Pb in the soft tissue were 415.2 +/- 56.52, 87.74 +/- 11.85, 18.71 +/- 2.10, 8.64 +/- 1.75, 0.67 +/- 0.29 and 1.61 +/- 0.45 microg g(-1) dw, respectively indicating that the bioaccumulation of essential metals in the soft tissue was greater than the non essential heavy metals. Metal accumulation in the soft tissue of razor clam followed Fe > Zn > Mn > Cu > Pb > Cd order in present study. The observed concentration of acute toxicity of metals in Solen brevis (Family: Solenidae) from Tanjung Lumpur Coastal waters was lower than the permissible limit recommended by National and international standards proved that this species could be utilized for human consumption.
    Matched MeSH terms: Metals, Heavy/analysis*
  16. Pradit S, Shazili NA, Towatana P, Saengmanee W
    Bull Environ Contam Toxicol, 2016 Apr;96(4):472-7.
    PMID: 26725081 DOI: 10.1007/s00128-015-1717-z
    This study was undertaken to assess the levels of trace metals (As, Cd, Cu, Pb, and Zn) in two common species of cockles (Anadara granosa and Anadara inaequivalvis) from two coastal areas in Thailand (Pattani Bay) and Malaysia (the Setiu Wetlands). A total of 350 cockles were collected in February and September 2014. Trace metals were determined by Inductively Coupled Plasma Mass Spectrometry. We observed that cockles in both areas had a higher accumulation of metals in September. Notably, the biota-sediment accumulation (BSAF) of Cd was highest in both areas. A strong positive correlation of Cd with the length of the cockles at Pattani Bay (r(2) = 0.597) and the Setiu Wetlands (r(2) = 0.675) was noted. It was suggested that As could be a limiting element (BSAF < 1) of cockles obtained from Pattani Bay. In comparison with the permissible limits set by the Thailand Ministry of Public Health and the Malaysia Food Regulations, mean values of As, Cd, Cu, Pb, and Zn were within acceptable limits, but the maximum values of Cd and Pb exceeded the limits for both areas. Regular monitoring of trace metals in cockles from both areas is suggested for more definitive contamination determination.
    Matched MeSH terms: Metals, Heavy/analysis*
  17. Ab Razak NH, Praveena SM, Aris AZ, Hashim Z
    Public Health, 2016 Feb;131:103-11.
    PMID: 26715317 DOI: 10.1016/j.puhe.2015.11.006
    Information about the quality of drinking water, together with analysis of knowledge, attitude and practice (KAP) analysis and health risk assessment (HRA) remain limited. The aims of this study were: (1) to ascertain the level of KAP regarding heavy metal contamination of drinking water in Pasir Mas; (2) to determine the concentration of heavy metals (Al, Cr, Cu, Fe, Ni, Pb, Zn and Cd) in drinking water in Pasir Mas; and (3) to estimate the health risks (non-carcinogenic and carcinogenic) caused by heavy metal exposure through drinking water using hazard quotient and lifetime cancer risk.
    Matched MeSH terms: Metals, Heavy/analysis*
  18. Ong GH, Wong LS, Tan AL, Yap CK
    Environ Monit Assess, 2016 Jan;188(1):40.
    PMID: 26687083 DOI: 10.1007/s10661-015-5042-0
    Centella asiatica is a commonly used medicinal plant in Malaysia. As heavy metal accumulation in medicinal plants which are highly consumed by human is a serious issue, thus the assessment of heavy metals in C. asiatica is important for the safety of consumers. In this study, the heavy metal accumulation in C. asiatica and the potential health risks were investigated. Samples of C. asiatica and surface soils were collected from nine different sites around Peninsular Malaysia. The concentration of six heavy metals namely Cd, Cu, Ni, Fe, Pb and Zn were determined by air-acetylene flame atomic absorption spectrophotometer (AAS). The degree of anthropogenic influence was assessed by calculating the enrichment factor (EF) and index of geoaccumulation (Igeo). The heavy metal uptake into the plant was estimated through the calculation of translocation factor (TF), bioconcentration factor (BCF) and correlation study. Estimated daily intakes (EDI) and target hazard quotients (THQ) were used to determine the potential health risk of consuming C. asiatica. The results showed that the overall surface soil was polluted by Cd, Cu and Pb, while the uptake of Zn and Ni by the plants was high. The value of EDI and THQ showed that the potential of Pb toxicity in C. asiatica was high as well. As heavy metal accumulation was confirmed in C. asiatica, daily consumption of the plant derived from polluted sites in Malaysia was not recommended.
    Matched MeSH terms: Metals, Heavy/analysis*
  19. Foong PM, Abedi Karjiban R, Normi YM, Salleh AB, Abdul Rahman MB
    Metallomics, 2015 Jan;7(1):156-64.
    PMID: 25412156 DOI: 10.1039/c4mt00163j
    Metal ions are one of the essential elements which are extensively involved in many cellular activities. With rapid advancements in genome sequencing techniques, bioinformatics approaches have provided a promising way to extract functional information of a protein directly from its primary structure. Recent findings have suggested that the metal content of an organism can be predicted from its complete genome sequences. Characterizing the biological metal usage of cold-adapted organisms may help to outline a comprehensive understanding of the metal-partnerships between the psychrophile and its adjacent environment. The focus of this study is targeted towards the analysis of the metal composition of a psychrophilic yeast Glaciozyma antarctica PI12 isolated from sea ice of Antarctica. Since the cellular metal content of an organism is usually reflected in the expressed metal-binding proteins, the putative metal-binding sequences from G. antarctica PI12 were identified with respect to their sequence homologies, domain compositions, protein families and cellular distribution. Most of the analyses revealed that the proteome was enriched with zinc, and the content of metal decreased in the order of Zn > Fe > Mg > Mn, Ca > Cu. Upon comparison, it was found that the metal compositions among yeasts were almost identical. These observations suggested that G. antarctica PI12 could have inherited a conserved trend of metal usage similar to modern eukaryotes, despite its geographically isolated habitat.
    Matched MeSH terms: Metals, Heavy/analysis
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links