Displaying publications 21 - 40 of 90 in total

Abstract:
Sort:
  1. Fulltext Air Quality Prediction Using the Fractional Gradient-Based Recurrent Neural Network
    Arora S, Sawaran Singh NS, Singh D, Rakesh Shrivastava R, Mathur T, Tiwari K, et al.
    Comput Intell Neurosci, 2022;2022:9755422.
    PMID: 36531923 DOI: 10.1155/2022/9755422
    In this study, the air quality index (AQI) of Indian cities of different tiers is predicted by using the vanilla recurrent neural network (RNN). AQI is used to measure the air quality of any region which is calculated on the basis of the concentration of ground-level ozone, particle pollution, carbon monoxide, and sulphur dioxide in air. Thus, the present air quality of an area is dependent on current weather conditions, vehicle traffic in that area, or anything that increases air pollution. Also, the current air quality is dependent on the climate conditions and industrialization in that area. Thus, the AQI is history-dependent. To capture this dependency, the memory property of fractional derivatives is exploited in this algorithm and the fractional gradient descent algorithm involving Caputo's derivative has been used in the backpropagation algorithm for training of the RNN. Due to the availability of a large amount of data and high computation support, deep neural networks are capable of giving state-of-the-art results in the time series prediction. But, in this study, the basic vanilla RNN has been chosen to check the effectiveness of fractional derivatives. The AQI and gases affecting AQI prediction results for different cities show that the proposed algorithm leads to higher accuracy. It has been observed that the results of the vanilla RNN with fractional derivatives are comparable to long short-term memory (LSTM).
    Matched MeSH terms: Particulate Matter/analysis
  2. Health impacts from TRAPs and carbon emissions in the projected electric vehicle growth and energy generation mix scenarios in Malaysia
    Kwan SC, Zakaria SB, Ibrahim MF, Wan Mahiyuddin WR, Md Sofwan N, A Wahab MI, et al.
    Environ Res, 2023 Jan 01;216(Pt 2):114524.
    PMID: 36228692 DOI: 10.1016/j.envres.2022.114524
    Road transport contributes over 70% of air pollution in urban areas and is the second largest contributor to the total carbon dioxide emissions in Malaysia at 21% in 2016. Transport-related air pollutants (TRAPs) such as NOx, SO2, CO and particulate matter (PM) pose significant threats to the urban population's health. Malaysia has targeted to deploy 885,000 EV cars on the road by 2030 in the Low Carbon Mobility Blueprint (LCMB). This study aims to quantify the health co-benefits of electric vehicle adoption from their impacts on air quality in Malaysia. Two EV uptake projections, i.e. LCMB and Revised EV Adoption (REVA) projections, and five electricity generation mix scenarios were modelled up to 2040. We used comparative health risk assessment to estimate the potential changes in mortality and burden of diseases (BoD) from the emissions in each scenario. Intake fractions and exposure-risk functions were used to calculate the burden from respiratory diseases (PM2.5, NOx, SO2, CO), cardiovascular diseases and lung cancer (PM2.5). Results showed that along with a net reduction of carbon emissions across all scenarios, there could be reduced respiratory mortality from NOx by 10,200 mortality (176,200 DALYs) and SO2 by 2600 mortality (45,400 DALYs) per year in 2040. However, there could also be additional 719 mortality (9900 DALYs) per year from PM2.5 and 329 mortality (5600 DALYs) from CO per year. The scale of reduction in mortality and BoD from NOx and SO2 are significantly larger than the scale of increase from PM2.5 and CO, indicating potential net positive health impacts from the EV adoption in the scenarios. The health cost savings from the reduced BoD of respiratory mortality could reach up to RM 7.5 billion per year in 2040. In conclusion, EV is a way forward in promoting a healthy and sustainable future transport in Malaysia.
    Matched MeSH terms: Particulate Matter/analysis
  3. Underestimation of biomass burning contribution to PM2.5 due to its chemical degradation based on hourly measurements of organic tracers: A case study in the Yangtze River Delta (YRD) region, China
    Li Q, Zhang K, Li R, Yang L, Yi Y, Liu Z, et al.
    Sci Total Environ, 2023 May 10;872:162071.
    PMID: 36775179 DOI: 10.1016/j.scitotenv.2023.162071
    Biomass burning (BB) has significant impacts on air quality and climate change, especially during harvest seasons. In previous studies, levoglucosan was frequently used for the calculation of BB contribution to PM2.5, however, the degradation of levoglucosan (Lev) could lead to large uncertainties. To quantify the influence of the degradation of Lev on the contribution of BB to PM2.5, PM2.5-bound biomass burning-derived markers were measured in Changzhou from November 2020 to March 2021 using the thermal desorption aerosol gas chromatography-mass spectrometry (TAG-GC/MS) system. Temporal variations of three anhydro-sugar BB tracers (e.g., levoglucosan, mannosan (Man), and galactosan (Gal)) were obtained. During the sampling period, the degradation level of air mass (x) was 0.13, indicating that ~87 % of levoglucosan had degraded before sampling in Changzhou. Without considering the degradation of levoglucosan in the atmosphere, the contribution of BB to OC were 7.8 %, 10.2 %, and 9.3 % in the clean period, BB period, and whole period, respectively, which were 2.4-2.6 times lower than those (20.8 %-25.9 %) considered levoglucosan degradation. This illustrated that the relative contribution of BB to OC could be underestimated (~14.9 %) without considering degradation of levoglucosan. Compared to the traditional method (i.e., only using K+ as BB tracer), organic tracers (Lev, Man, Gal) were put into the Positive Matrix Factorization (PMF) model in this study. With the addition of BB organic tracers and replaced K+ with K+BB (the water-soluble potassium produced by biomass burning), the overall contribution of BB to PM2.5 was enhanced by 3.2 % after accounting for levoglucosan degradation based on the PMF analysis. This study provides useful information to better understand the effect of biomass burning on the air quality in the Yangtze River Delta region.
    Matched MeSH terms: Particulate Matter/analysis
  4. Fulltext On the investigation of COVID-19 lockdown influence on air pollution concentration: regional investigation over eighteen provinces in Iraq
    Hashim BM, Al-Naseri SK, Al Maliki A, Sa'adi Z, Malik A, Yaseen ZM
    Environ Sci Pollut Res Int, 2021 Sep;28(36):50344-50362.
    PMID: 33956319 DOI: 10.1007/s11356-021-13812-x
    At the end of 2019, a novel coronavirus COVID-19 emerged in Wuhan, China, and later spread throughout the world, including Iraq. To control the rapid dispersion of the virus, Iraq, like other countries, has imposed national lockdown measures, such as social distancing, restriction of automobile traffic, and industrial enterprises. This has led to reduced human activities and air pollutant emissions, which caused improvement in air quality. This study focused on the analysis of the impact of the six partial, total, and post-lockdown periods (1st partial lockdown from March 1 to16, 2020, 1st total lockdown from March 17 to April 21, 2nd partial lockdown from April 22 to May 23, 2nd total lockdown from May 24 to June 13, 3rd partial lockdown from June 14 to August 19, and end partial lockdown from August 20 to 31) on the average of daily NO2, O3, PM2.5, and PM10 concentrations, as well as air quality index (AQI) in 18 Iraqi provinces during these periods (from March 1st to August 31st, 2020). The analysis showed a decline in the average of daily PM2.5, PM10, and NO2 concentrations by 24%, 15%, and 8%, respectively from March 17 to April 21, 2020 (first phase of total lockdown) in comparison to the 1st phase of partial lockdown (March 1 to March 16, 2020). Furthermore, the O3 increased by 10% over the same period. The 2nd phase of total lockdown, the 3rd partial lockdown, and the post-lockdown periods witnessed declines in PM2.5 by 8%, 11%, and 21%, respectively, while the PM10 increases over the same period. Iraqi also witnessed improvement in the AQI by 8% during the 1st phase of total lockdown compared to the 1st phase of partial lockdown. The level of air pollutants in Iraq declined significantly during the six lockdown periods as a result of reduced human activities. This study gives confidence that when strict measures are implemented, air quality can improve.
    Matched MeSH terms: Particulate Matter/analysis
  5. Trends in atmospheric particulate matter in Dhaka, Bangladesh, and the vicinity
    Rana MM, Sulaiman N, Sivertsen B, Khan MF, Nasreen S
    Environ Sci Pollut Res Int, 2016 Sep;23(17):17393-403.
    PMID: 27230142 DOI: 10.1007/s11356-016-6950-4
    Dhaka and its neighboring areas suffer from severe air pollution, especially during dry season (November-April). We investigated temporal and directional variations in particulate matter (PM) concentrations in Dhaka, Gazipur, and Narayanganj from October 2012 to March 2015 to understand different aspects of PM concentrations and possible sources of high pollution in this region. Ninety-six-hour backward trajectories for the whole dry season were also computed to investigate incursion of long-range pollution into this area. We found yearly PM10 concentrations in this area about three times and yearly PM2.5 concentrations about six times greater than the national standards of Bangladesh. Dhaka and its vicinity experienced several air pollution episodes in dry season when PM2.5 concentrations were 8-13 times greater than the World Health Organization (WHO) guideline value. Higher pollution and great contribution of PM2.5 most of the time were associated with the north-westerly wind. Winter (November to January) was found as the most polluted season in this area, when average PM10 concentrations in Dhaka, Gazipur, and Narayanganj were 257.1, 240.3, and 327.4 μg m(-3), respectively. Pollution levels during wet season (May-October) were, although found legitimate as per the national standards of Bangladesh, exceeded WHO guideline value in 50 % of the days of that season. Trans-boundary source identifications using concentration-weighted trajectory method revealed that the sources in the eastern Indian region bordering Bangladesh, in the north-eastern Indian region bordering Nepal and in Nepal and its neighboring areas had high probability of contributing to the PM pollutions at Gazipur station.
    Matched MeSH terms: Particulate Matter/analysis*
  6. GIS-based air quality modelling: spatial prediction of PM10 for Selangor State, Malaysia using machine learning algorithms
    Tella A, Balogun AL
    Environ Sci Pollut Res Int, 2022 Dec;29(57):86109-86125.
    PMID: 34533750 DOI: 10.1007/s11356-021-16150-0
    Rapid urbanization has caused severe deterioration of air quality globally, leading to increased hospitalization and premature deaths. Therefore, accurate prediction of air quality is crucial for mitigation planning to support urban sustainability and resilience. Although some studies have predicted air pollutants such as particulate matter (PM) using machine learning algorithms (MLAs), there is a paucity of studies on spatial hazard assessment with respect to the air quality index (AQI). Incorporating PM in AQI studies is crucial because of its easily inhalable micro-size which has adverse impacts on ecology, environment, and human health. Accurate and timely prediction of the air quality index can ensure adequate intervention to aid air quality management. Therefore, this study undertakes a spatial hazard assessment of the air quality index using particulate matter with a diameter of 10 μm or lesser (PM10) in Selangor, Malaysia, by developing four machine learning models: eXtreme Gradient Boosting (XGBoost), random forest (RF), K-nearest neighbour (KNN), and Naive Bayes (NB). Spatially processed data such as NDVI, SAVI, BU, LST, Ws, slope, elevation, and road density was used for the modelling. The model was trained with 70% of the dataset, while 30% was used for cross-validation. Results showed that XGBoost has the highest overall accuracy and precision of 0.989 and 0.995, followed by random forest (0.989, 0.993), K-nearest neighbour (0.987, 0.984), and Naive Bayes (0.917, 0.922), respectively. The spatial air quality maps were generated by integrating the geographical information system (GIS) with the four MLAs, which correlated with Malaysia's air pollution index. The maps indicate that air quality in Selangor is satisfactory and posed no threats to health. Nevertheless, the two algorithms with the best performance (XGBoost and RF) indicate that a high percentage of the air quality is moderate. The study concludes that successful air pollution management policies such as green infrastructure practice, improvement of energy efficiency, and restrictions on heavy-duty vehicles can be adopted in Selangor and other Southeast Asian cities to prevent deterioration of air quality in the future.
    Matched MeSH terms: Particulate Matter/analysis
  7. Fulltext Towards Integrated Air Pollution Monitoring and Health Impact Assessment Using Federated Learning: A Systematic Review
    Neo EX, Hasikin K, Mokhtar MI, Lai KW, Azizan MM, Razak SA, et al.
    Front Public Health, 2022;10:851553.
    PMID: 35664109 DOI: 10.3389/fpubh.2022.851553
    Environmental issues such as environmental pollutions and climate change are the impacts of globalization and become debatable issues among academics and industry key players. One of the environmental issues which is air pollution has been catching attention among industrialists, researchers, and communities around the world. However, it has always neglected until the impacts on human health become worse, and at times, irreversible. Human exposure to air pollutant such as particulate matters, sulfur dioxide, ozone and carbon monoxide contributed to adverse health hazards which result in respiratory diseases, cardiorespiratory diseases, cancers, and worst, can lead to death. This has led to a spike increase of hospitalization and emergency department visits especially at areas with worse pollution cases that seriously impacting human life and health. To address this alarming issue, a predictive model of air pollution is crucial in assessing the impacts of health due to air pollution. It is also critical in predicting the air quality index when assessing the risk contributed by air pollutant exposure. Hence, this systemic review explores the existing studies on anticipating air quality impact to human health using the advancement of Artificial Intelligence (AI). From the extensive review, we highlighted research gaps in this field that are worth to inquire. Our study proposes to develop an AI-based integrated environmental and health impact assessment system using federated learning. This is specifically aims to identify the association of health impact and pollution based on socio-economic activities and predict the Air Quality Index (AQI) for impact assessment. The output of the system will be utilized for hospitals and healthcare services management and planning. The proposed solution is expected to accommodate the needs of the critical and prioritization of sensitive group of publics during pollution seasons. Our finding will bring positive impacts to the society in terms of improved healthcare services quality, environmental and health sustainability. The findings are beneficial to local authorities either in healthcare or environmental monitoring institutions especially in the developing countries.
    Matched MeSH terms: Particulate Matter/analysis
  8. Multi-air pollution risk assessment in Southeast Asia region using integrated remote sensing and socio-economic data products
    Sakti AD, Anggraini TS, Ihsan KTN, Misra P, Trang NTQ, Pradhan B, et al.
    Sci Total Environ, 2023 Jan 01;854:158825.
    PMID: 36116660 DOI: 10.1016/j.scitotenv.2022.158825
    Air pollution has massive impacts on human life and poor air quality results in three million deaths annually. Air pollution can result from natural causes, including volcanic eruptions and extreme droughts, or human activities, including motor vehicle emissions, industry, and the burning of farmland and forests. Emission sources emit multiple pollutant types with diverse characteristics and impacts. However, there has been little research on the risk of multiple air pollutants; thus, it is difficult to identify multi-pollutant mitigation processes, particularly in Southeast Asia, where air pollution moves dynamically across national borders. In this study, the main objective was to develop a multi-air pollution risk index product for CO, NO2, and SO2 based on Sentinel-5P remote sensing data from 2019 to 2020. The risk index was developed by integrating hazard, vulnerability, and exposure analyses. Hazard analysis considers air pollution data from remote sensing, vulnerability analysis considers the air pollution sources, and exposure analysis considers the population density. The novelty of this study lies in its development of a multi-risk model that considers the weights obtained from the relationship between the hazard and vulnerability parameters. The highest air pollution risk index values were observed in urban areas, with a high exposure index that originates from pollution caused by human activity. Multi-risk analysis of the three air pollutants revealed that Singapore, Vietnam, and the Philippines had the largest percentages of high-risk areas, while Indonesia had the largest total high-risk area (4361 km2). Using the findings of this study, the patterns and characteristics of the risk distribution of multiple air pollutants in Southeast Asia can be identified, which can be used to mitigate multi-pollutant sources, particularly with respect to supporting the clean air targets in the Sustainable Development Goals.
    Matched MeSH terms: Particulate Matter/analysis
  9. Fulltext Air quality prediction by machine learning models: A predictive study on the indian coastal city of Visakhapatnam
    Ravindiran G, Hayder G, Kanagarathinam K, Alagumalai A, Sonne C
    Chemosphere, 2023 Oct;338:139518.
    PMID: 37454985 DOI: 10.1016/j.chemosphere.2023.139518
    Clean air is critical component for health and survival of human and wildlife, as atmospheric pollution is associated with a number of significant diseases including cancer. However, due to rapid industrialization and population growth, activities such as transportation, household, agricultural, and industrial processes contribute to air pollution. As a result, air pollution has become a significant problem in many cities, especially in emerging countries like India. To maintain ambient air quality, regular monitoring and forecasting of air pollution is necessary. For that purpose, machine learning has emerged as a promising technique for predicting the Air Quality Index (AQI) compared to conventional methods. Here we apply the AQI to the city of Visakhapatnam, Andhra Pradesh, India, focusing on 12 contaminants and 10 meteorological parameters from July 2017 to September 2022. For this purpose, we employed several machine learning models, including LightGBM, Random Forest, Catboost, Adaboost, and XGBoost. The results show that the Catboost model outperformed other models with an R2 correlation coefficient of 0.9998, a mean absolute error (MAE) of 0.60, a mean square error (MSE) of 0.58, and a root mean square error (RMSE) of 0.76. The Adaboost model had the least effective prediction with an R2 correlation coefficient of 0.9753. In summary, machine learning is a promising technique for predicting AQI with Catboost being the best-performing model for AQI prediction. Moreover, by leveraging historical data and machine learning algorithms enables accurate predictions of future urban air quality levels on a global scale.
    Matched MeSH terms: Particulate Matter/analysis
  10. Smart solutions for clean air: An AI-guided approach to sustainable industrial pollution control in coal-fired power plant
    Lim JY, Teng SY, How BS, Loy ACM, Heo S, Jansen J, et al.
    Environ Pollut, 2023 Oct 15;335:122335.
    PMID: 37558197 DOI: 10.1016/j.envpol.2023.122335
    Conventional fossil fuels are relied on heavily to meet the ever-increasing demand for energy required by human activities. However, their usage generates significant air pollutant emissions, such as NOx, SOx, and particulate matter. As a result, a complete air pollutant control system is necessary. However, the intensive operation of such systems is expected to cause deterioration and reduce their efficiency. Therefore, this study evaluates the current air pollutant control configuration of a coal-powered plant and proposes an upgraded system. Using a year-long dataset of air pollutants collected at 30-min intervals from the plant's telemonitoring system, untreated flue gas was reconstructed with a variational autoencoder. Subsequently, a superstructure model with various technology options for treating NOx, SOx, and particulate matter was developed. The most sustainable configuration, which included reburning, desulfurization with seawater, and dry electrostatic precipitator, was identified using an artificial intelligence (AI) model to meet economic, environmental, and reliability targets. Finally, the proposed system was evaluated using a Monte Carlo simulation to assess various scenarios with tightened discharge limits. The untreated flue gas was then evaluated using the most sustainable air pollutant control configuration, which demonstrated a total annual cost, environmental quality index, and reliability indices of 44.1 × 106 USD/year, 0.67, and 0.87, respectively.
    Matched MeSH terms: Particulate Matter/analysis
  11. Fulltext Improving PM2.5 prediction in New Delhi using a hybrid extreme learning machine coupled with snake optimization algorithm
    Masood A, Hameed MM, Srivastava A, Pham QB, Ahmad K, Razali SFM, et al.
    Sci Rep, 2023 Nov 29;13(1):21057.
    PMID: 38030733 DOI: 10.1038/s41598-023-47492-z
    Fine particulate matter (PM2.5) is a significant air pollutant that drives the most chronic health problems and premature mortality in big metropolitans such as Delhi. In such a context, accurate prediction of PM2.5 concentration is critical for raising public awareness, allowing sensitive populations to plan ahead, and providing governments with information for public health alerts. This study applies a novel hybridization of extreme learning machine (ELM) with a snake optimization algorithm called the ELM-SO model to forecast PM2.5 concentrations. The model has been developed on air quality inputs and meteorological parameters. Furthermore, the ELM-SO hybrid model is compared with individual machine learning models, such as Support Vector Regression (SVR), Random Forest (RF), Extreme Learning Machines (ELM), Gradient Boosting Regressor (GBR), XGBoost, and a deep learning model known as Long Short-Term Memory networks (LSTM), in forecasting PM2.5 concentrations. The study results suggested that ELM-SO exhibited the highest level of predictive performance among the five models, with a testing value of squared correlation coefficient (R2) of 0.928, and root mean square error of 30.325 µg/m3. The study's findings suggest that the ELM-SO technique is a valuable tool for accurately forecasting PM2.5 concentrations and could help advance the field of air quality forecasting. By developing state-of-the-art air pollution prediction models that incorporate ELM-SO, it may be possible to understand better and anticipate the effects of air pollution on human health and the environment.
    Matched MeSH terms: Particulate Matter/analysis
  12. Recent progress on phytoremediation of urban air pollution
    Duan X, Gu H, Lam SS, Sonne C, Lu W, Li H, et al.
    Chemosphere, 2024 Feb;349:140821.
    PMID: 38042424 DOI: 10.1016/j.chemosphere.2023.140821
    The rapid growth of population and economy has led to an increase in urban air pollutants, greenhouse gases, energy shortages, environmental degradation, and species extinction, all of which affect ecosystems, biodiversity, and human health. Atmospheric pollution sources are divided into direct and indirect pollutants. Through analysis of the sources of pollutants, the self-functioning of different plants can be utilized to purify the air quality more effectively. Here, we explore the absorption of greenhouse gases and particulate matter in cities as well as the reduction of urban temperatures by plants based on international scientific literature on plant air pollution mitigation, according to the adsorption, dust retention, and transpiration functions of plants. At the same time, it can also reduce the occurrence of extreme weather. It is necessary to select suitable tree species for planting according to different plant functions and environmental needs. In the context of tight urban land use, the combination of vertical greening and urban architecture, through the rational use of plants, has comprehensively addressed urban air pollution. In the future, in urban construction, attention should be paid to the use of heavy plants and the protection and development of green spaces. Our review provides necessary references for future urban planning and research.
    Matched MeSH terms: Particulate Matter/analysis
  13. Fulltext Machine learning algorithms for high-resolution prediction of spatiotemporal distribution of air pollution from meteorological and soil parameters
    Tao H, Jawad AH, Shather AH, Al-Khafaji Z, Rashid TA, Ali M, et al.
    Environ Int, 2023 May;175:107931.
    PMID: 37119651 DOI: 10.1016/j.envint.2023.107931
    This study uses machine learning (ML) models for a high-resolution prediction (0.1°×0.1°) of air fine particular matter (PM2.5) concentration, the most harmful to human health, from meteorological and soil data. Iraq was considered the study area to implement the method. Different lags and the changing patterns of four European Reanalysis (ERA5) meteorological variables, rainfall, mean temperature, wind speed and relative humidity, and one soil parameter, the soil moisture, were used to select the suitable set of predictors using a non-greedy algorithm known as simulated annealing (SA). The selected predictors were used to simulate the temporal and spatial variability of air PM2.5 concentration over Iraq during the early summer (May-July), the most polluted months, using three advanced ML models, extremely randomized trees (ERT), stochastic gradient descent backpropagation (SGD-BP) and long short-term memory (LSTM) integrated with Bayesian optimizer. The spatial distribution of the annual average PM2.5 revealed the population of the whole of Iraq is exposed to a pollution level above the standard limit. The changes in temperature and soil moisture and the mean wind speed and humidity of the month before the early summer can predict the temporal and spatial variability of PM2.5 over Iraq during May-July. Results revealed the higher performance of LSTM with normalized root-mean-square error and Kling-Gupta efficiency of 13.4% and 0.89, compared to 16.02% and 0.81 for SDG-BP and 17.9% and 0.74 for ERT. The LSTM could also reconstruct the observed spatial distribution of PM2.5 with MapCurve and Cramer's V values of 0.95 and 0.91, compared to 0.9 and 0.86 for SGD-BP and 0.83 and 0.76 for ERT. The study provided a methodology for forecasting spatial variability of PM2.5 concentration at high resolution during the peak pollution months from freely available data, which can be replicated in other regions for generating high-resolution PM2.5 forecasting maps.
    Matched MeSH terms: Particulate Matter/analysis
  14. Traffic-Related Air Pollution (TRAP) in relation to respiratory symptoms and lung function of school-aged children in Kuala Lumpur
    Suhaimi NF, Jalaludin J, Roslan NIS
    Int J Environ Health Res, 2024 Mar;34(3):1384-1396.
    PMID: 37160687 DOI: 10.1080/09603123.2023.2211020
    Traffic-Related Air Pollution (TRAP) exposure has been connected to significant health impacts among children. A cross-sectional comparative study was conducted among school children in Malaysia to determine the relationship between their exposure to TRAP and respiratory health effects. Air monitoring was conducted in schools and residences, while the children's routines were investigated using a diary of daily activities. Respondents' background and respiratory symptoms were obtained from a validated questionnaire, while a spirometry test was performed to determine their lung function status. The distances between schools and residences from the had contributed to the higher concentration of air pollutants in this study, which had associations with the children's respiratory symptoms and lung function status. PM2.5 was the main predictor influencing the respondents' respiratory symptoms and lung function abnormalities. In conclusion, exposure of school children to a high TRAP level might increase their risk of getting respiratory symptoms and lung function reduction.
    Matched MeSH terms: Particulate Matter/analysis
  15. A case study on the source apportionment of indoor air quality at a kindergarten in eastern Peninsular Malaysia using cluster analysis
    Sidek SS, Yatim SRM, Abdullah S, Shafie FA, Ishak AR, Dom NC, et al.
    Med J Malaysia, 2024 Mar;79(Suppl 1):104-109.
    PMID: 38555893
    BACKGROUND: Indoor air quality is an important concern for kindergartener because young children are more vulnerable to the effects of poor air quality. Poor indoor air quality can cause respiratory problems and other health issues, which can negatively affect a child's ability to learn and grow. Aim of this study is to determine the trend and status of indoor air pollutants in study areas by using descriptive statistics and cluster analysis.

    MATERIALS AND METHODS: Air temperature (T), relative humidity (RH), air movement (AM), carbon dioxide (CO2), formaldehyde (HCHO), and particulate matter (PM) are the monitored parameters. Monitoring was carried out in the kindergarten for three consecutive days starting from 8.00am to 12.00pm.

    RESULTS: Indoor carbon dioxide readings were higher at 0800 when parents drove to kindergarten to drop off their children without turning off the engine. In addition to this, the PM10 reading at 1000 was high but still within the standard range according to ICOP-IAQ 2010.

    CONCLUSION: The findings highlight the importance of indoor air quality improvement measures for kindergarten buildings which can be used to improve indoor air quality in kindergarten environments.

    Matched MeSH terms: Particulate Matter/analysis
  16. Wavelet-based time series model to improve the forecast accuracy of PM10 concentrations in Peninsular Malaysia
    Yong NK, Awang N
    Environ Monit Assess, 2019 Jan 11;191(2):64.
    PMID: 30635772 DOI: 10.1007/s10661-019-7209-6
    This study presents the use of a wavelet-based time series model to forecast the daily average particulate matter with an aerodynamic diameter of less than 10 μm (PM10) in Peninsular Malaysia. The highlight of this study is the use of a discrete wavelet transform (DWT) in order to improve the forecast accuracy. The DWT was applied to convert the highly variable PM10 series into more stable approximations and details sub-series, and the ARIMA-GARCH time series models were developed for each sub-series. Two different forecast periods, one was during normal days, while the other was during haze episodes, were designed to justify the usefulness of DWT. The models' performance was evaluated by four indices, namely root mean square error, mean absolute percentage error, probability of detection and false alarm rate. The results showed that the model incorporated with DWT yielded more accurate forecasts than the conventional method without DWT for both the forecast periods, and the improvement was more prominent for the period during the haze episodes.
    Matched MeSH terms: Particulate Matter/analysis*
  17. Fulltext Exposure to Particulate PAHs on Potential Genotoxicity and Cancer Risk among School Children Living Near the Petrochemical Industry
    Sopian NA, Jalaludin J, Abu Bakar S, Hamedon TR, Latif MT
    Int J Environ Res Public Health, 2021 03 04;18(5).
    PMID: 33806616 DOI: 10.3390/ijerph18052575
    This study aimed to assess the association of exposure to particle-bound (PM2.5) polycyclic aromatic hydrocarbons (PAHs) with potential genotoxicity and cancer risk among children living near the petrochemical industry and comparative populations in Malaysia. PM2.5 samples were collected using a low-volume sampler for 24 h at three primary schools located within 5 km of the industrial area and three comparative schools more than 20 km away from any industrial activity. A gas chromatography-mass spectrometer was used to determine the analysis of 16 United States Environmental Protection Agency (USEPA) priority PAHs. A total of 205 children were randomly selected to assess the DNA damage in buccal cells, employing the comet assay. Total PAHs measured in exposed and comparative schools varied, respectively, from 61.60 to 64.64 ng m-3 and from 5.93 to 35.06 ng m-3. The PAH emission in exposed schools was contributed mainly by traffic and industrial emissions, dependent on the source apportionment. The 95th percentiles of the incremental lifetime cancer risk estimated using Monte Carlo simulation revealed that the inhalation risk for the exposed children and comparative populations was 2.22 × 10-6 and 2.95 × 10-7, respectively. The degree of DNA injury was substantially more severe among the exposed children relative to the comparative community. This study reveals that higher exposure to PAHs increases the risk of genotoxic effects and cancer among children.
    Matched MeSH terms: Particulate Matter/analysis
  18. Associations between air pollutants and peak expiratory flow and fractional exhaled nitric oxide in students
    Adman MA, Hashim JH, Manaf MRA, Norback D
    Int J Tuberc Lung Dis, 2020 02 01;24(2):189-195.
    PMID: 32127103 DOI: 10.5588/ijtld.19.0096
    BACKGROUND: Studies on the effects of outdoor air pollution on the respiratory health of students in tropical countries such as Malaysia are limited.OBJECTIVE: To assess associations between outdoor air pollutants and peak expiratory flow (PEF) and fractional exhaled nitric oxide (FeNO).METHOD: PEF and FeNO levels of 487 students recruited in Melaka and Putrajaya, Malaysia, were measured in April and June 2014. Multiple linear regression with mutual adjustment was used to analyse the associations between exposure to air pollution and health.RESULTS: PEF was significantly associated with ozone for 1-day exposure (β = -13.3 l/min, 95% CI -22.7 to -3.8), carbon monoxide for 2-day exposure (β = -57.2 l/min, 95% CI -90.7 to -23.7) and particulate matter ≦10 μm in diameter for 3-day exposure (β = -6.0 l/min, 95% CI -9.2 to -2.8) and 7-day exposure (β = -8.6 l/min, 95% CI -13.0 to -4.1). Stratified analysis showed that associations between PEF and outdoor air pollutant exposures were similar in students with and without elevated FeNO levels.CONCLUSION: Outdoor air pollution in Malaysia may cause airway obstruction unrelated to eosinophilic airway inflammation among students as measured using FeNO.
    Matched MeSH terms: Particulate Matter/analysis
  19. Fulltext Exploring the linkage between PM2.5 levels and COVID-19 spread and its implications for socio-economic circles
    Ali SM, Malik F, Anjum MS, Siddiqui GF, Anwar MN, Lam SS, et al.
    Environ Res, 2021 02;193:110421.
    PMID: 33160973 DOI: 10.1016/j.envres.2020.110421
    A pneumonia-like disease of unknown origin caused a catastrophe in Wuhan city, China. This disease spread to 215 countries affecting a wide range of people. World health organization (WHO) called it a pandemic and it was officially named as Severe Acute Respiratory Syndrome Corona virus 2 (SARS CoV-2), also known as Corona virus disease (COVID-19). This pandemic compelled countries to enforce a socio-economic lockdown to prevent its widespread. This paper focuses on how the particulate matter pollution was reduced during the lockdown period (23 March to April 15, 2020) as compared to before lockdown. Both ground-based and satellite observations were used to identify the improvement in air quality of Pakistan with primary focus on four major cities of Lahore, Islamabad, Karachi and Peshawar. Both datasets have shown a substantial reduction in PM2.5 pollution levels (ranging from 13% to 33% in case of satellite observations, while 23%-58% in ground-based observations) across Pakistan. Result shows a higher rate of COVID-19 spread in major cities of Pakistan with poor air quality conditions. Yet more research is needed in order to establish linkage between COVID-19 spread and air pollution. However, it can be partially attributed to both higher rate of population density and frequent exposure of population to enhanced levels of PM2.5 concentrations before lockdown period.
    Matched MeSH terms: Particulate Matter/analysis
  20. Spatial identification and temporal prediction of air pollution sources using conditional bivariate probability function and time series signature
    Althuwaynee OF, Pokharel B, Aydda A, Balogun AL, Kim SW, Park HJ
    J Expo Sci Environ Epidemiol, 2021 07;31(4):709-726.
    PMID: 33159165 DOI: 10.1038/s41370-020-00271-8
    Accurate identification of distant, large, and frequent sources of emission in cities is a complex procedure due to the presence of large-sized pollutants and the existence of many land use types. This study aims to simplify and optimize the visualization mechanism of long time-series of air pollution data, particularly for urban areas, which is naturally correlated in time and spatially complicated to analyze. Also, we elaborate different sources of pollution that were hitherto undetectable using ordinary plot models by leveraging recent advances in ensemble statistical approaches. The high performing conditional bivariate probability function (CBPF) and time-series signature were integrated within the R programming environment to facilitate the study's analysis. Hourly air pollution data for the period between 2007 to 2016 is collected using four air quality stations, (ca0016, ca0058, ca0054, and ca0025), situated in highly urbanized locations that are characterized by complex land use and high pollution emitting activities. A conditional bivariate probability function (CBPF) was used to analyze the data, utilizing pollutant concentration values such as Sulfur dioxide (SO2), Nitrogen oxides (NO2), Carbon monoxide (CO) and Particulate Matter (PM10) as a third variable plotted on the radial axis, with wind direction and wind speed variables. Generalized linear model (GLM) and sensitivity analysis are applied to verify and visualize the relationship between Air Pollution Index (API) of PM10 and other significant pollutants of GML outputs based on quantile values. To address potential future challenges, we forecast 3 months PM10 values using a Time Series Signature statistical algorithm with time functions and validated the outcome in the 4 stations. Analysis of results reveals that sources emitting PM10 have similar activities producing other pollutants (SO2, CO, and NO2). Therefore, these pollutants can be detected by cross selection between the pollution sources in the affected city. The directional results of CBPF plot indicate that ca0058 and ca0054 enable easier detection of pollutants' sources in comparison to ca0016 and ca0025 due to being located on the edge of industrial areas. This study's CBPF technique and time series signature analysis' outcomes are promising, successfully elaborating different sources of pollution that were hitherto undetectable using ordinary plot models and thus contribute to existing air quality assessment and enhancement mechanisms.
    Matched MeSH terms: Particulate Matter/analysis
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links