Displaying publications 21 - 40 of 141 in total

Abstract:
Sort:
  1. Taqi M, Razak IA, Ab-Murat N
    J Pak Med Assoc, 2018 Oct;68(10):1483-1487.
    PMID: 30317346
    OBJECTIVE: To estimate the frequency and pattern of sugar intake among Pakistani school going children and its association with early carious lesion and caries history.

    METHODS: The cross-sectional study was conducted from January to May 2016 in seven schools of Bhakkar district in the Punjab province of Pakistan, and comprised of school children aged 11-12 years. Diet diaries were used to assess the frequency of sugar intake while caries was assessed using the Modified International Caries Detection and Assessment System. Bivariate analysis was used to assess the association of sugar consumption and early carious lesion with selected sociodemographic variables, and regression analysis was performed to evaluate the factor that matters most in caries occurrence.

    RESULTS: Of the 226 subjects, 115(51%) had early carious lesion. Mean frequency of sugar intake was 5.2±3.2 times per day. Children who consumed sugar between main meals (p=0.01) and within two hours before bedtime (p=0.04) had significantly higher history of having caries. Cariogenic intake before bedtime was significantly associated with overall caries risk (p=0.02).

    CONCLUSIONS: The frequency of sugar intake among the subjects was slightly higher than the recommended level. .

    Matched MeSH terms: Dietary Sucrose/administration & dosage*; Dietary Sucrose/adverse effects
  2. Masood M, Masood Y, Newton T
    Caries Res, 2012;46(6):581-8.
    PMID: 23006794 DOI: 10.1159/000342170
    The aim of this study was to examine the impact that national income and income inequality in high and low income countries have on the relationship between dental caries and sugar consumption.
    Matched MeSH terms: Dietary Sucrose/adverse effects; Dietary Sucrose/supply & distribution*
  3. Prakash I, Chaturvedula VS, Markosyan A
    Nat Prod Commun, 2013 Nov;8(11):1523-6.
    PMID: 24427932
    From the extract of the leaves of Stevia rebaudiana Bertoni, a diterpene glycoside was isolated which was identified as 13-[(2-O-beta-D-glucopyranosyl-3-O-beta-D-glucopyranosyl-beta-D-glucopyranosyl)oxy] ent-kaur-16-en-19-oic acid-(2-O-beta-D-glucopyranosyl-3-O-beta-D-glucopyranosyl-D-glucopyranosyl) ester (1). The complete 1H and 13C NMR assignment of 1 is reported for the first time, from extensive NMR (1H and 13C, COSY, HSQC, and HMBC) and mass spectral data. Also, we report the sensory evaluation of 1 against sucrose for the sweetness property of this molecule.
    Matched MeSH terms: Sucrose
  4. Razaif-Mazinah MRM, Anis SNS, Harun HI, Rashid KA, Annuar MSM
    Biotechnol Appl Biochem, 2017 Mar;64(2):259-269.
    PMID: 26800648 DOI: 10.1002/bab.1482
    Pseudomonas putida Bet001 and Delftia tsuruhatensis Bet002, isolated from palm oil mill effluent, accumulated poly(3-hydroxyalkanoates) (PHAs) when grown on aliphatic fatty acids, sugars, and glycerol. The substrates were supplied at 20:1 C/N mole ratio. Among C-even n-alkanoic acids, myristic acid gave the highest PHA content 26 and 28 wt% in P. putida and D. tsuruhatensis, respectively. Among C-odd n-alkanoic acids, undecanoic gave the highest PHA content at 40 wt% in P. putida and 46 wt% in D. tsuruhatensis on pentadecanoic acid. Sugar and glycerol gave <10 wt% of PHA content for both bacteria. Interestingly, D. tsuruhatensis accumulated both short- and medium-chain length PHA when supplied with n-alkanoic acids ranging from octanoic to lauric, sucrose, and glycerol with 3-hydroxybutyrate as the major monomer unit. In P. putida, the major hydroxyalkanoates unit was 3-hydroxyoctanoate and 3-hydroxydecanoate when grown on C-even acids. Conversely, 3-hydroxyheptanoate, 3-hydrxoynonanoate, and 3-hydroxyundecanoate were accumulated with C-odd acids. Weight-averaged molecular weight (Mw ) was in the range of 53-81 kDa and 107-415 kDa for P. putida and D. tsuruhatensis, respectively. Calorimetric analyses indicated that both bacteria synthesized semicrystalline polymer with good thermal stability with degradation temperature (Td ) ranging from 178 to 282 °C.
    Matched MeSH terms: Sucrose
  5. Mustafa SE, Mustafa S, Ismail A, Abas F, Abd Manap MY, Ahmed Hamdi OA, et al.
    Heliyon, 2020 Oct;6(10):e05298.
    PMID: 33134584 DOI: 10.1016/j.heliyon.2020.e05298
    The influence of commercial prebiotics (fructo-oligosaccharides and inulin) and sugars (glucose and sucrose) on enhancing equol production from soymilk isoflavones by Bifidobacterium longum BB536 and Bifidobacterium breve ATCC 15700 was evaluated in vitro. Sterilized soymilk was inoculated with each bacterial species at 37 °C for 48 h. The growth and β-glucosidase enzyme activity for the two Bifidobacterium species in soymilk throughout fermentation were assessed. The highest viable count for B. breve (8.75 log CFU/ml) was reached at 36 h and for B. longum (8.55 log CFU/ml) at 24 h. Both bacterial species displayed β-glucosidase activity. B. breve showed increased enzyme activity (4.126 U) at 36 h, while B. longum exhibited maximum activity (3.935 U) at 24 h of fermentation. Among the prebiotics screened for their effect in isoflavones transformation to equol, inulin delivered the highest effect on equol production. The co-culture of B. longum BB536 and B. breve ATCC15700 in soymilk supplemented with inulin produced the highest level (11.49 mmol/l) of equol at 48 h of fermentation process. Level of daidzin declined whereas that of daidzein increased, and then gradually decreased due to formation of equol when soymilk was fermented using bifidobacterial. This suggests that the nutritional value of soymilk may be increased by increasing bioavailability of the bioactive ingredients. Collectively these data identify probiotics and prebiotic combinations suitable for inclusion in soymilk to enhance equol production.
    Matched MeSH terms: Sucrose
  6. Wan-Mohtar WAAQI, Ab Kadir S, Halim-Lim SA, Ilham Z, Hajar-Azhari S, Saari N
    Food Sci Biotechnol, 2019 Dec;28(6):1747-1757.
    PMID: 31807347 DOI: 10.1007/s10068-019-00602-y
    In submerged-liquid fermentation, seven key parameters were assessed using one-factor-at-a-time to obtain the highest GABA yield using an industrial soy sauce koji Aspergillus oryzae strain NSK (AOSNSK). AOSNSK generated maximum GABA at 30 °C (194 mg/L) and initial pH 5 (231 mg/L), thus was able to utilize sucrose (327 mg/L of GABA) for carbon source. Sucrose at 100 g/L, improved GABA production at 646 mg/L. Single nitrogen sources failed to improve GABA production, however a combination of yeast extract (YE) and glutamic acid (GA) improved GABA at 646.78 mg/L. Carbon-to-nitrogen ratio (C8:N3) produced the highest cell (24.01 g/L) and GABA at a minimal time of 216 h. The key parameters of 30 °C, initial pH 5, 100 g/L of sucrose, combination YE and GA, and C8:N3 generated the highest GABA (3278.31 mg/L) in a koji fermentation. AOSNSK promisingly showed for the development of a new GABA-rich soy sauce.
    Matched MeSH terms: Sucrose
  7. Sari E, Mahira KF, Patel DN, Chua LS, Pratami DK, Sahlan M
    Heliyon, 2021 May;7(5):e06912.
    PMID: 34013079 DOI: 10.1016/j.heliyon.2021.e06912
    Royal jellies (RJs) possess moisturizing, emulsifying, and stabilizing properties, and several pharmacological activities have also been found to be present, which make them an ideal component for cosmetic and skin care products. However, despite the abundant efficacies, there is a lack of studies that explore the chemical composition of RJ using metabolome analysis. Furthermore, an evaluation of the chemical composition of Indonesian RJs collected from different regions has yet to be carried out. Therefore, the main objective of this study was to identify any differences in the chemical composition of such RJs. Chemical profiling was also carried out to enable more targeted utilization based on the actual compositions. Chemical profiling is also important given the rich Indonesian biodiversity and the high dependence of the RJ compositions on the botanical source. In this research, ultra-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry was used as part of an untargeted metabolomics approach. From the chemical profiling, >30 compounds were identified across four RJ samples. The major constituents of the samples were found to be oligosaccharides, fatty acids, and adenosine monophosphate derivatives. Meanwhile, sucrose and planteose were found to be highest in the samples from Banjarnegara and Kediri, whereas dimethyloctanoic acid was found to be unique to the sample from Banjarnegara. It was also discovered that the RJs from Demak and Tuban contained more organic fatty acids and oligosaccharides than the other samples. Although the sample from Demak demonstrated good potential for use in the cosmetic, skin care, and bio-supplement industries, the higher abundance of fatty acids and oligosaccharides in the sample from Tuban indicated that it is perhaps the most suitable RJ for use in this field.
    Matched MeSH terms: Sucrose
  8. HAIDAR HARIRI ABU SEMAN, HUSNI HAYATI MOHD RAFDI
    MyJurnal
    Pink Antigonon leptopushave potential to be commercialized as cut flowers for flower arrangement. In order to determine cut inflorescences' vase life, vase solution treatments containing Artificial Tap Water as control, salicyclic acid (SA) at 100, 200, 300 mg/L and combination of 100, 200, 300 mg/L SA with 2% sucrose were conducted. Parameters observed were vase life, relative fresh weight (RFW), vase solution uptake (VSU), flower drop (FD), flower colour, relative water content (RWC) and pH. The results showed that cut inflorescences in vase treatment containing 200 mg/L SA + 2% sucrose and 300 mg/L + 2% sucrose had 1.6 fold longer vase life than the control, showing higher water uptake and reduced flower drop by 28%.
    Matched MeSH terms: Sucrose
  9. Labrooy C, Abdullah TL, Stanslas J
    Trop Life Sci Res, 2020 Apr;31(1):123-139.
    PMID: 32963715 DOI: 10.21315/tlsr2020.31.1.8
    Kaempferia parviflora is an ethnomedicinally important plant. Conventional propagation of K. parviflora is hindered by slow growth rate, long dormancy periods and dual use of rhizomes for seeds as well as marketable produce. In our study, we developed a promising dual-phase micropropagation protocol to increase number of plantlets, survivability, biomass and quality plantlets for mass production. Multiple shoot regeneration was found most successful on Murashige and Skoog (MS) media supplemented with 35.52 μM N6-benzyladenine (BA) in terms of highest number of shoots (22.4 ± 1.84), leaves (29.27 ± 1.30), and roots (17.8 ± 1.72) per explant. High survivability was observed with an acclimatisation percentage of 100% in sterile perlite medium. This method was shown to be preferable compared to conventional propagation in terms of propagation time and number of plantlets. Regenerated in vitro plantlets were then successfully induced to form microrhizomes in MS media with an optimal concentration of 6% (w/v) sucrose. Increase in microrhizome biomass (35.7 ± 2.59 g per flask), number of microrhizomes (5.2 ± 0.78), shoots (8.5 ± 1.58) and roots (8.5 ± 1.58) were observed for this treatment. This investigation successfully highlights the manipulation of single factors in short time frame to produce a simple and efficient alternative propagation method for K. parviflora.
    Matched MeSH terms: Sucrose
  10. Nadzirah, K.Z., Zainal, S., Noriham, A., Normah, I., Siti Roha, A.M., Nadya, H.
    MyJurnal
    The aim of this study is to determine colour changes during storage and physico- chemical properties of peel, core and crown extracts of pineapple variety N36 for maturity indices of 1, 2 and 3. The L* (lightness), a* (redness) and b* (yellowness) values for peels increased significantly (p ≤ 0.05) at each maturity stage during seven days storage. pH of pineapple peel, core and crown extracts were in the range of 3.24 to 3.84. The titratable acidity, percentage of pulp and Total Soluble Solid (TSS) of pineapple peel, core and crown extracts were in the range of 0.16 to 0.36%, 1.37 to 2.91% and 1.4 to 5.3˚Brix, respectively. Fructose and glucose contents were significantly highest (p ≤ 0.05) in pineapple core extract followed by pineapple peel extract and pineapple crown extract for maturity index 2. Significant difference (p ≤ 0.05) was found in sucrose content between pineapple core and peel extracts with 8.92% and 3.87%, respectively for maturity index 3. However, sucrose was not detected in pineapple crown extract. Pineapple core extract was significantly higher (p ≤ 0.05) amount of total sugar content compared to pineapple peel and crown extracts for all maturity indices.
    Matched MeSH terms: Sucrose
  11. Ismail, I., Anuar, M.S., Shamsudin, R.
    MyJurnal
    Green coffee beans are stored for a certain period and under certain conditions until they are finally utilized. The storage period may depend on customer demand while the storage conditions depend on where the coffee beans are stored. Thus, this research emphasizes the physicochemical changes that occur in Liberica coffee beans during storage under the Malaysian
    climate (average temperature and relative humidity of 29.33ºC and 71.75% respectively). The changes in the physico-chemical (coffee size, mass, densities, colour, proximate analysis, sucrose, chlorogenic acid content) and microbiological (yeast and mould count) properties were evaluated during eight months of storage. After the storage, the physical properties of the coffee changed as the coffee beans expanded in size, reduced in mass and density and became brighter in colour. Changes in the chemical properties were also detected where the moisture decreased and the ash content increased. In addition, the sucrose level was found to decrease with a corresponding increase in chlorogenic acid. During storage, the counts of yeast and mould were reduced. Model equations describing the changes in the properties were developed. The overall conclusion was that the coffee beans reduced in quality during storage.
    Matched MeSH terms: Sucrose
  12. Ricca, R.N., Jami, Mohammed Saedi, Alam, Md. Zahangir
    MyJurnal
    This work aims at optimizing the media constituents for citric acid production from oil palm empty fruit bunches (EFB) as renewable resource using artificial neural networks (ANN) approach. The bioconversion process was done through solid state bioconversion using Aspergillus niger. ANN model was built using MATLAB software. A dataset consists of 20 runs from our previous work was used to develop ANN. The predictive and generalization ability of ANN and the results of RSM were compared. The determination coefficients (R2-value) for ANN and RSM models were 0.997 and 0.985, respectively, indicating the superiority of ANN in capturing the non-linear behavior of the system. Validation process was done and the maximum citric acid production (147.74 g/kg-EFB) was achieved using the optimal solution from ANN which consists of 6.1% sucrose, 9.2% mineral solution and 15.0% inoculum.
    Matched MeSH terms: Sucrose
  13. Jamilah, B., Shu, C. E., Kharidah, M., Dzulkifly, M. A., Noranizan, A.
    MyJurnal
    Pitaya peel (Hylocereus polyrhizus), which consists approximately 22% of the whole fruit weight, is discarded during processing. Physico-chemical properties of the discarded pitaya peel were determined in
    order to evaluate its potential for recovery of any value-added materials. The moisture content of the peel was approximately 92.7% and it was low in total soluble solids, protein, ash and fat content. Betacyanin pigment (150.46 ± 2.19 mg/100 g) and pectin (10.8%) were high in the peel. Glucose, maltose and fructose were detected in the peel but not sucrose and galactose. The peel also had very high insoluble and soluble dietary fibre which had exhibited a good ratio of insoluble dietary fibre to soluble dietary fibre (3.8: 1.0).
    Matched MeSH terms: Sucrose
  14. Santana, P., Huda, N., Yang, T.A.
    MyJurnal
    Surimi refers to concentrated myofibrial protein extracted from fish flesh by washing process. Surimi powder, is normally prepared in a dried form, and potentially useful as a raw material for preparation of seafood products. Surimi powder offers many advantages in industrial application, such as easy handling, low distribution cost, and physically convenient for addition to dry mixtures. In order to prevent the denaturation of the protein during drying, dryoprotectants such as sucrose and polyols can be added. Surimi powder is classified as fish protein concentrate type A because its protein content is higher than 65%. Surimi powder has good functional properties, such as gelation, water holding capacity, and emulsifying and foaming properties. Gel-based fish products and fish snacks are common products that can be made from surimi powder.
    Matched MeSH terms: Sucrose
  15. Haj Najafi, A., Yusof, Y. A., Rahman, R. A., Ganjloo, A., Ling, C. N.
    MyJurnal
    In the current research, osmotic dehydration of red pitaya (Hylocereus polyrhizusis) cubes using sucrose solution at mild temperature (35ºC) was investigated. Sucrose solution (40, 50 and 60% w/w) was employed for osmotic dehydration process. Responses of weight reduction (WR), solid gain (SG), water loss (WL), color (L*, a* and b*) and texture (hardness) were evaluated. It was found that sucrose concentration significantly (p < 0.05) affected the mass transfer terms during osmosis process. The results obtained revealed an increase in yellowness (b*), decrease in lightness (L*) and redness (a*) as the sucrose concentration increased. Furthermore, osmotically dehydrated samples were considerably softer than untreated samples. Increasing of sucrose concentration and dehydration time caused softer tissue of dehydrated product compared with the fresh red pitaya.
    Matched MeSH terms: Sucrose
  16. Asmah Awal, Nazatul Asikin Muda
    MyJurnal
    In this paper, a micropropagation protocol of sugar palm (Arenga pinnata Wurmb Merr) through callogenesis and somatic embryogenesis was examined. Callus induction frequency and somatic embryogenesis response were dependent on plant growth regulators (PGRs) and genotype. Semi-compact and compact embryogenic calluses were induced from excised immature zygotic embryo (IZE) cultured on semi-solid MS (Murashige & Skoog, 1962) medium supplemented with various concentration and combination of 2,4-dichlorophenoxyacetic acid (2,4-D) and 6-benzyl aminopurine acid (BAP). MS medium supplemented with 0.4 mg/L 2,4-D and 0.5 mg/L BAP was found optimum to induce 100% rate of embryogenic calluses and maximum degree of callus formation after 8 and 12 weeks of culture. The incorporation of increased sucrose concentration (60.0 g/L) and 2.0 g/L casein hydrolysate (CH) to the culture medium with similar PGRs composition enhanced the induction of globular somatic embryos (SEs), while addition of silver nitrate (AgNO3) produced SEs of different stages. SEs maturated in MS medium containing 1.0 mg/L BAP and 1.0 mg/L naphthalene-acetic acid (NAA) formed cotyledon-stage embryos. Clonal roots regeneration was obtained on half-strength MS devoid of PGRs after 4 months of culture. Frequent subcultures increased embryogenesis rate favourably.
    Matched MeSH terms: Sucrose
  17. Siti Roha, A.M., Zainal, S., Noriham, A., Nadzirah, K.Z.
    MyJurnal
    Pineapple waste is a by-product resulting from canning processing of pineapple that produce about 35% of fruit waste and lead to serious environmental pollution. Pineapple waste contains valuable nutrient components of simple sugar such as sucrose, glucose and fructose. Analysis of sugar content is important for further processing such as fermentation. The aim of this study was to determine the amount of sugar in different parts of pineapple waste (peel, core and crown) from variety N36. The selected pineapple waste for maturity indices 1, 2 and 3 was cut into small pieces before crushed in a food processor. The crushed waste was then filtered through muslin cloth followed by membrane filter 0.45μm to produce pineapple waste extract. Sugar content was determined using High Performance Liquid Chromatography. It was found that fructose content was significantly higher in core (2.24%) followed by peel (2.04%) and crown (0.87%). It was also found that glucose content was significantly higher in core (2.56%) followed by peel (2.18%) and crown (0.53%). Significant difference (p < 0.05) was found for sucrose content between pineapple core and peel extract with the value of 8.92% and 3.87%, respectively. However, sucrose was not detected in pineapple crown. It means that pineapple core extract had the highest values of fructose, glucose and sucrose compared to the other parts of pineapple waste extract. Besides, it was found that sucrose content was significantly higher in pineapple core for index 3 as compared to indices 1 and 2. Glucose and fructose was significantly higher in pineapple core for index 2 compared to indices 1 and 3.
    Matched MeSH terms: Sucrose
  18. Goh YK, Marzuki NF, Tan SY, Tan SS, Tung HJ, Goh YK, et al.
    Mycology, 2016;7(1):36-44.
    PMID: 30123614 DOI: 10.1080/21501203.2015.1137985
    The influence of different medium components (glucose, sucrose, and fructose) on the growth of different Ganoderma isolates and species was investigated using mixture design. Ten sugar combinations based on three simple sugars were generated with two different concentrations, namely 3.3% and 16.7%, which represented low and high sugar levels, respectively. The media were adjusted to either pH 5 or 8. Ganoderma isolates (two G. boninense from oil palm, one Ganoderma species from coconut palm, G. lingzhi, and G. australe from tower tree) grew faster at pH 8. Ganoderma lingzhi proliferated at the slowest rate compared to all other tested Ganoderma species in all the media studied. However, G. boninense isolates grew the fastest. Different Ganoderma species were found to have different sugar preferences. This study illustrated that the mixture design can be used to determine the optimal combinations of sugar or other nutrient/chemical components of media for fungal growth.
    Matched MeSH terms: Sucrose
  19. Zakarya S, Kassim A, Lim H, Anwar N, Huang N
    Titanium dioxide particles were successfully prepared using microemulsion-mediated hydrothermal processing route, with sucrose ester as a stabilising agent. X-ray diffraction patterns revealed that the particles possessed anatase crystal phase. Scanning electron micrographs showed micron-sized spherical particles with rough and smooth surfaces, which eventually interconnected with one another. The formation mechanism of the titanium dioxide microstructures was postulated. The as-prepared particles were subjected to photocatalytic degradation of methylene blue, which exhibited higher photocatalytic activity compared to their commercial counterpart.
    Matched MeSH terms: Sucrose
  20. Anwar N, Kassim A, Lim H, Zakarya S, Huang N
    Sains Malaysiana, 2010;39:261-265.
    Titanium dioxide nanoparticles were synthesized via low-temperature sucrose ester micelle-mediated hydrothermal processing route using titanium isopropoxide as the precursor. X-ray diffractometer revealed that the samples possessed a mixed crystalline phases consisting of anatase and brookite in which anatase was the main phase. Upon increasing the hydrothermal reaction temperature, the degree of crystallinity of the nanoparticles improved and their morphology transformed from bundles of needles to rods and to spheres. Photocatalytic behaviour of the as-synthesized nanoparticles was investigated by photodegradation of methylene blue solution in an ultraviolet A irradiating photoreactor. The as-synthesized nanoparticles exhibited higher photocatalytic performance as compared to the commercial counterpart.
    Matched MeSH terms: Sucrose
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links