Displaying publications 21 - 40 of 105 in total

Abstract:
Sort:
  1. Akanbi, T.O., Nazamid, S., Adebowale, A.A., Farooq, A., Olaoye, A.O.
    MyJurnal
    Proximate compositions, culinary and sensory properties of noodles prepared from proportionate combinations of breadfruit starch and wheat flour were investigated. Breadfruit starch (BS) isolated from matured breadfruit (Artocarpus altilis) was used to produce noodles in combination with hard red wheat flour (WF) at a ratio of 100% WF:0% BS, 80% WF:20% BS, 60% WF:40% BS, 40% WF:60% BS, 20% WF:80% BS. The protein, fat, ash, crude fibre and moisture contents of the Breadfruit starch-Wheat flour (BSWF) noodles prepared from the above blends ranged from 0.65 to 10.88%, 0.35 to 3.15%, 1.28 to 2.25%, 1.18 to 1.45% and 4.65 to 5.45%, respectively. The contents of protein, fat, ash and crude fibre increased as the percentage breadfruit starch decreased. However, values of moisture content did not follow the same trend, instead higher values were found for 100% BS:0% WF (5.35%) and 20% BS:80% WF (5.45%). The cooking yield of the BSWF noodles ranged from 21.02 (60% BS:40% WF) to 23.75 g (100% BS:0% WF), cooking loss ranged from 5.49 (20% BS:80% WF) to 9.19% (100% BS:0% WF), while swelling index ranged from 3.1 (20% BS:80% WF) to 3.4 (100% BS:0% WF). Throughout the study, noodles produced from blends of 20% breadfruit starch and 80% wheat flour showed superior proximate, culinary and sensory attributes.
    Matched MeSH terms: Triticum
  2. Mamat, H., Hill, S.E.
    MyJurnal
    Biscuit is a popular food product where it is produced using wheat flour, sugar and fat as its main ingredients. Wheat flour is the major material used in biscuit production and within the flour starch is the principal component. The details of starch properties such as pasting properties, gelatinisation properties, crystallinity were discussed in this review. Starch is the major structural element in many foods, with the fat or sugar also playing key roles. Sugar gives sweetness, colour, add volumes and influence the texture of a biscuit. Besides that, it shows significant impact on starch gelatinization properties. Fat plays an important role in biscuit production and the type of fat used determines the quality of the final product. In this article, the functional properties of major ingredients of biscuit were also reviewed with emphasis on wheat flour, sugar and fat.
    Matched MeSH terms: Triticum
  3. Mohd Afandi P. Mohammed
    Sains Malaysiana, 2014;43:451-457.
    This paper investigates the application of visco-hyperelastic model to soft rubberlike material, that is gluten. Gluten is a major protein in wheat flour dough (a mixture of flour and water) which exists as long network fibers and undergo large deformation under uniaxial tension and compression. The visco-hyperelastic model is represented by a combination of the viscoelastic Prony series and the hyperelastic extended tube model. Calibration of the visco-hyperelastic model to gluten tests result suggests that gluten can be modelled as a finite viscoelastic material.
    Matched MeSH terms: Triticum
  4. Iqbal SZ, Rehman B, Selamat J, Akram N, Ahmad MN, Sanny M, et al.
    J Food Prot, 2020 Aug 01;83(8):1284-1288.
    PMID: 32678886 DOI: 10.4315/0362-028X.JFP-19-361
    ABSTRACT: A total of 133 samples of whole wheat and barley grains and wheat and barley flour collected from retail markets in the main cities of Punjab, Pakistan, were analyzed for the mycotoxin fumonisin B1 (FB1) using reverse phase high-performance liquid chromatography with fluorescence detection. Of these samples, 120 (90%) were positive for FB1, and 75 (63%) of the 120 positive samples had FB1 concentrations higher than the European Union maximum (200 μg/kg). The limit of detection was 4 μg/kg. The highest mean (±SD) concentration of FB1 was found in whole wheat samples, 980.5 ± 211.4 μg/kg. The calculated dietary intakes of FB1 from wheat and barley flours were 4,456 and 503.7 ng/g of body weight per day, respectively.
    Matched MeSH terms: Triticum
  5. Iqbal SZ, Rabbani T, Asi MR, Jinap S
    Food Chem, 2014 Aug 15;157:257-62.
    PMID: 24679779 DOI: 10.1016/j.foodchem.2014.01.129
    Aflatoxins (AFs), ochratoxin A (OTA) and zearalenone (ZEN) were analysed in 237 breakfast cereal samples collected from central areas of Punjab, Pakistan. According to the results, 41% of the samples were found contaminated with AFs, out of which 16% and 8% samples were found to be above the European Union (EU) maximum content for AFB1 and total AFs, respectively. About 48% samples were found contaminated with OTA and 30% samples were found to be above the EU maximum content. The results have shown that 53% samples of breakfast cereals were found contaminated with ZEN and 8% samples were found to be above the permissible limit of EU. The highest mean level of AFB1 and total AFs were found in semolina i.e. 3.60 and 4.55 μg/kg, respectively. Similarly, semolina was the highest contaminated breakfast cereal for OTA (3.90 μg/kg), while cornflakes (brand B) was found highest contaminated with ZEN (13.45 μg/kg).
    Matched MeSH terms: Triticum/chemistry*
  6. Ho LH, Abdul Aziz NA, Azahari B
    Food Chem, 2013 Aug 15;139(1-4):532-9.
    PMID: 23561142 DOI: 10.1016/j.foodchem.2013.01.039
    The physico-chemical and sensorial properties of the control (BCtr), commercial wheat flour (CWF) bread substituted with 10% BPF (banana pseudo-stem flour) (B10BPF) and B10BPF with added 0.8% w/w (flour weight basis) xanthan gum (XG) or sodium carboxymethylcellulose (CMC) (B10BPFXG and B10BPFCMC, respectively) were examined. The proximate analyses revealed that the composite bread had significantly higher moisture, ash, crude fibre, soluble, insoluble and total dietary fibre contents but lower protein, fat and carbohydrate contents than the BCtr. Bread incorporated with BPF resulted in a lower volume, darker crumb and lighter crust colour than the BCtr. The addition of CMC improved the bread volume. All breads containing BPF had greater total phenolics, and antioxidant properties than the control bread. Sensory evaluation indicated that the B10BPFCMC bread had the highest acceptability.
    Matched MeSH terms: Triticum/chemistry*
  7. Chan KW, Khong NM, Iqbal S, Ismail M
    Int J Mol Sci, 2012;13(6):7496-507.
    PMID: 22837707 DOI: 10.3390/ijms13067496
    The present study was conducted to evaluate the antioxidant properties of wheat and rice flours under simulated gastrointestinal pH condition. After subjecting the wheat and rice flour slurries to simulated gastrointestinal pH condition, both slurries were centrifuged to obtain the crude phenolic extracts for further analyses. Extraction yield, total contents of phenolic and flavonoids were determined as such (untreated) and under simulated gastrointestinal pH condition (treated). 1,1-diphenyl-2-picrylhydrazyl radical (DPPH(•)) scavenging activity, 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) radical cation (ABTS(•+)) scavenging activity, ferric reducing antioxidant power (FRAP), beta-carotene bleaching (BCB) and iron chelating activity assays were employed for the determination of antioxidant activity of the tested samples. In almost all of the assays performed, significant improvements in antioxidant properties (p < 0.05) were observed in both flours after treatment, suggesting that wheat and rice flours contain considerably heavy amounts of bound phenolics, and that their antioxidant properties might be improved under gastrointestinal digestive conditions.
    Matched MeSH terms: Triticum/chemistry*
  8. Hafeez F, Abbas M, Zia K, Ali S, Farooq M, Arshad M, et al.
    PLoS One, 2021;16(10):e0257952.
    PMID: 34644343 DOI: 10.1371/journal.pone.0257952
    Wheat (Triticum aestivum L.) production is significantly altered by the infestation of sucking insects, particularly aphids. Chemical sprays are not recommended for the management of aphids as wheat grains are consumed soon after crop harvests. Therefore, determining the susceptibility of different wheat genotypes and selecting the most tolerant genotype could significantly lower aphid infestation. This study evaluated the susceptibility of six different wheat genotypes ('Sehar-2006', 'Shafaq-2006', 'Faisalabad-2008', 'Lasani-2008', 'Millat-2011' and 'Punjab-2011') to three aphid species (Rhopalosiphum padi Linnaeus, Schizaphis graminum Rondani, Sitobion avenae Fabricius) at various growth stages. Seed dressing with insecticides and plant extracts were also evaluated for their efficacy to reduce the incidence of these aphid species. Afterwards, an economic analysis was performed to compute cost-benefit ratio and assess the economic feasibility for the use of insecticides and plant extracts. Aphids' infestation was recorded from the seedling stage and their population gradually increased as growth progressed towards tillering, stem elongation, heading, dough and ripening stages. The most susceptible growth stage was heading with 21.89 aphids/tiller followed by stem elongation (14.89 aphids/tiller) and dough stage (13.56 aphids/tiller). The genotype 'Punjab-2011' recorded the lower aphid infestation than 'Faisalabad-2008', 'Sehar-2006', 'Lasani-2008' and 'Shafaq-2006'. Rhopalosiphum padi appeared during mid-February, whereas S. graminum and S. avenae appeared during first week of March. Significant differences were recorded for losses in number of grains/spike and 1000-grain weight among tested wheat genotypes. The aphid population had non-significant correlation with yield-related traits. Hicap proved the most effective for the management of aphid species followed by Hombre and Husk among tested seed dressers, while Citrullus colocynthis L. and Moringa oleifera Lam. plant extracts exhibited the highest efficacy among different plant extracts used in the study. Economic analysis depicted that use of Hombre and Hicap resulted in the highest income and benefit cost ratio. Therefore, use of genotype Punjab-2011' and seed dressing with Hombre and Hicap can be successfully used to lower aphid infestation and get higher economic returns for wheat crop.
    Matched MeSH terms: Triticum/genetics*
  9. Watson A, Ghosh S, Williams MJ, Cuddy WS, Simmonds J, Rey MD, et al.
    Nat Plants, 2018 Jan;4(1):23-29.
    PMID: 29292376 DOI: 10.1038/s41477-017-0083-8
    The growing human population and a changing environment have raised significant concern for global food security, with the current improvement rate of several important crops inadequate to meet future demand 1 . This slow improvement rate is attributed partly to the long generation times of crop plants. Here, we present a method called 'speed breeding', which greatly shortens generation time and accelerates breeding and research programmes. Speed breeding can be used to achieve up to 6 generations per year for spring wheat (Triticum aestivum), durum wheat (T. durum), barley (Hordeum vulgare), chickpea (Cicer arietinum) and pea (Pisum sativum), and 4 generations for canola (Brassica napus), instead of 2-3 under normal glasshouse conditions. We demonstrate that speed breeding in fully enclosed, controlled-environment growth chambers can accelerate plant development for research purposes, including phenotyping of adult plant traits, mutant studies and transformation. The use of supplemental lighting in a glasshouse environment allows rapid generation cycling through single seed descent (SSD) and potential for adaptation to larger-scale crop improvement programs. Cost saving through light-emitting diode (LED) supplemental lighting is also outlined. We envisage great potential for integrating speed breeding with other modern crop breeding technologies, including high-throughput genotyping, genome editing and genomic selection, accelerating the rate of crop improvement.
    Matched MeSH terms: Triticum/genetics*
  10. Tariq Shahzad, Muhammad Mansoor Javaid, Hasnain Waheed, Tasawer Abbas, Muhammad Ashraf, Feng-Min Li, et al.
    Sains Malaysiana, 2018;47:2625-2635.
    Drought is one of the commonly occurring environmental stresses, limiting crop production in many countries. Selection
    of cultivar is the most effective and economical means for alleviating the adverse effects of drought stress on crops. The
    present study aimed to investigate the growth, some physiological processes, yield and quality of some newly-developed
    wheat cultivars (AARI-2011, AAS-2011, Faisalabad-2008, Millat-2011 and Punjab-2011) under field drought stress
    conditions. The cultivars were sown in a field under normal irrigation and drought-induced conditions. Maximum net
    photosynthetic rate was recorded in cv. AAS-2011 at growth stage of 67 days after wheat emergence under normal irrigation
    and cv. Faisalabad-2008 at 67 days after wheat emergence under drought condition. Leaf stomatal conductance and
    transpiration rate were maximum in cv. Faisalabad-2008 under drought conditions. The adverse effects of drought stress
    were observed more on cv. Millat-2011 than Faisalabad-2008, with respect to net photosynthetic rate and transpiration.
    Drought exerted a significant adverse effect on leaf stomatal conductance at 74 days after wheat emergence which was
    recorded as 230 mmol m-2 s-1. Among the cultivars, AAS-2011 recorded maximum yield traits and grain yield under normal
    irrigation condition and Faisalabad-2008 under drought condition. Cultivar Millat-2011 was the most susceptible to
    drought and Faisalabad-2008 the most resistant to drought. Faisalabad-2008 maintained the quality at the most under
    drought stress conditions. It is concluded that Fasialabad-2008 should be grown under field drought conditions to achieve
    maximal yield and quality of wheat.
    Matched MeSH terms: Triticum
  11. Nayan N, van Erven G, Kabel MA, Sonnenberg AS, Hendriks WH, Cone JW
    J Sci Food Agric, 2019 Jun;99(8):4054-4062.
    PMID: 30737799 DOI: 10.1002/jsfa.9634
    BACKGROUND: White rot fungi have been used to improve the nutritive value of lignocellulose for ruminants. In feed analysis, the Van Soest method is widely used to determine the cell wall contents. To assess the reliability of this method (Method A) for determination of cell wall contents in fungal-treated wheat straw, we compared a combined monosaccharide analysis and pyrolysis coupled to gas chromatography with mass spectrometry (Py-GC/MS) (Method B). Ruminal digestibility, measured as in vitro gas production (IVGP), was subsequently used to examine which method explains best the effect of fungal pretreatment on the digestibility of wheat straw.

    RESULTS: Both methods differed considerably in the mass recoveries of the individual cell wall components, which changed on how we assess their degradation characteristics. For example, Method B gave a higher degradation of lignin (61.9%), as compared to Method A (33.2%). Method A, however, showed a better correlation of IVGP with the ratio of lignin to total structural carbohydrates, as compared to Method B (Pearson's r of -0.84 versus -0.69). Nevertheless, Method B provides a more accurate quantification of lignin, reflecting its actual modification and degradation. With the information on the lignin structural features, Method B presents a substantial advantage in understanding the underlying mechanisms of lignin breakdown. Both methods, however, could not accurately quantify the cellulose contents - among others, due to interference of fungal biomass.

    CONCLUSION: Method A only accounts for the recalcitrant residue and therefore is more suitable for evaluating ruminal digestibility. Method B allows a more accurate quantification of cell wall, required to understand and better explains the actual modification of the cell wall. The suitability of both methods, therefore, depends on their intended purposes. © 2019 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

    Matched MeSH terms: Triticum/metabolism; Triticum/microbiology*; Triticum/chemistry
  12. Tijani, I.D.R., Jamal, P., Alam, M.Z., Mirghani, M.E.S.
    MyJurnal
    Media components such as wheat flour, MgSO4 and particle size were screened by Placket Burman design (PBD) while the operating range was fixed by one-factor-at-a-time method (OFAT), primarily for the enrichment of cassava peels as animal feed. Optimization of the selected media components was carried out using Face–Centered Central Composite Design (FCCCD) of the Response Surface Methodology (RSM) and the responses were measured in term of protein and lignin contents. Statistical analysis of the result showed that the quadratic term of wheat flour and the interaction between wheat flour and particle size were highly significant (P
    Matched MeSH terms: Triticum
  13. Siti Faridah, M.A., Noor Aziah, A.A.
    MyJurnal
    Response Surface Methodology (RSM) with Central Composite Rotatable Design (CCRD) was performed in this study to develop an acceptable reduced calorie chocolate cake. The range of the independent variables, namely Jackfruit Seed (JFS) flour (20-25% replacement of wheat flour) and polydextrose (10-15% replacement of sucrose) were identified which affect the volume, specific volume, symmetry and uniformity of the chocolate cake. The coefficient of determination, R2 values for volume, specific volume, symmetry and uniformity were greater than 0.900. The optimum level for replacement of sugar with polydextrose was at 11% and wheat flour with JFS flour was at 16% with calorie reduction approximately 34% from the control cake formulation.
    Matched MeSH terms: Triticum
  14. Zawawi, N., Gangadharan, P., Ahma Zaini, R., Samsudin, M.G., Karim, R., Maznah, I.
    MyJurnal
    Kenaf (Hibiscus cannabinus) seeds have always being wasted as agricultural waste. Recent studies revealed that the seeds contain high fiber. The purpose of this study is to develop defatted kenaf seeds yellow noodles (DKSY) and assess the nutritional and physicohemical properties of the noodles. Defatted kenaf flour at 25% and 75% were used to make DKSY noodles and compared to wheat yellow noodles (Control). Fresh DKSY noodles were analyzed for their nutritional and physiochemical properties. The ash and fiber contents increased in order of Control > 25% DKSY > 75% DKSY noodles. While total phenolic contents (TPC) was found to be higher in 75% DKSY noodles (138.30 ± 1.63 mg GAE/100 g) than Control noodles. Colour (L, b) and hardness decreased in order of Control > 25% DKSY > 75% DKSY indicating that DKSY noodles developed less quality than Control noodles. However, cooking loss values were found to be in the same order while cooking values exist in the opposite order indicating that. DKSY noodles have better noodle cooking quality. In conclusion, nutritional properties and noodle cooking quality of yellow noodles increased with higher concentration of defatted kenaf flour but the physicochemical properties were compromised. More research needs to be done in order to develop a formulation that can increase all of the attributes studied.
    Matched MeSH terms: Triticum
  15. Shamsabadi, H.T., Biabani, A., Desa Ahmad
    MyJurnal
    A field study was conducted on the effect of four primary tillage implements and three seed densities on the grain yield of rain fed wheat (Tajan cultivar), using a drill planting machine with the end wheels. The experimental design was a split plot design in a 4×3 factorial with three replications. In this study, the main plots were the tillage treatments, namely Mouldboard plough, Disc Plough, Chisel Plough, Offset Disc, and sub-plots were seed rates of 350, 400 and 450 seeds.m-2. Determinations included grain yield and selected yield components. The results showed that grain yield was not affected by the densities of seed and tillage machine treatments. The use of Chisel Plough, with 400 seeds.m-2 sowing rate, had the highest grain yield of wheat grown in the Golestan province (Iran), a region with an average annual rainfall of 450 mm.
    Matched MeSH terms: Triticum
  16. Noor Aziah, A.A., Komathi, C.A.
    MyJurnal
    There is an increasing demand for fibre rich food and food ingredients. In this study, pumpkin pulp, unripe banana pulp, unripe mango pulp and peel which are high in dietary fibre were processed into flour and substituted at 5% level for wheat flour in a composite flour crackers formulation. The control crackers comprised of 100% wheat flour. Sensory evaluation was conducted using a 9-point hedonic scale with 31 panelists evaluating the crackers based on colour, crrispiness, taste and overall acceptance. Different types of composite flour crackers were not significantly different (p≤0.05) in term of crispiness. For colour, taste and overall acceptance, the pumpkin, banana and control crackers differ significantly (p≤0.05) with the mango pulp and mango peel crackers.
    Matched MeSH terms: Triticum
  17. Anis Jauharah M, Wan Rosli W, Daniel Robert S
    Sains Malaysiana, 2014;43:45-52.
    Various types of natural fibre-rich ingredients are added into bakery-based products to improve their fibre content for health promotional purposes. However, most of these products are frequently added with imported dietary fibre ingredients. The aim of this study was to develop bakery products incorporated with young corn powder (YCP) and to evaluate the effects on physicochemical properties and sensory acceptabilities. Dried young corn was used to substitute wheat flour in biscuit and muffin formulations at different levels (0, 10, 20 and 30%). The effects of YCP incorporation on proximate compositions, physical characteristics, texture profile and sensory evaluation of both bakery products were investigated. The present results showed that YCP had significantly increased protein and total dietary fibre contents of both biscuit and muffin. Hardness attribute of both products increased in line with the level of YCP addition. Interestingly, biscuit and muffin containing 10% YCP received better score than the control and other formulations for most of the sensorial attributes judged. In conclusion, YCP can be potentially be used as an alternative functional ingredient for partial replacement of wheat flour in formulating biscuit and muffin because of its ability to improve the nutritional quality without jeopardizing sensorial palatability.
    Matched MeSH terms: Triticum
  18. Nasrine S, El-Darier S, El-Taher H
    Sains Malaysiana, 2013;42:1501-1504.
    The aim of the present study was to investigate the potential allelopathic effects of Euphorbia guyoniana (donor species) aqueous extract on germination efficiency of two weeds (Bromus tectorum and Melilotus indica) and one crop species (Triticum aestivum) under laboratory conditions. The germination efficiency, plumule and radicle length of Bromus was completely inhibited at the highest concentration of aqueous extracts of the donor species level (10%). The two recipient species exerted weak measures as affected by the highest concentration level of the donor. This inhibition was markedly obvious in B. tectorum than in M. indica indicating that B. tectorum is more sensitive to the tested donor, while the M. indica is more adapted to the aqueous extract than the B. tectorum.
    Matched MeSH terms: Triticum
  19. Uthumporn U, Nadiah I, Izzuddin I, Cheng LH, Aida H
    Sains Malaysiana, 2017;46:223-229.
    This research mainly focused on isolation of non-starch polysaccharide (NSP) from different parts of cassava tuber by using water extraction and to evaluate the effect of NSP addition into flour on nutritional composition, swelling and solubility, pasting properties and dough characteristics by farinograph and extensograph. Three origins of (NSP) extracted were used: cassava peels, coarse and fine portions from cassava flesh. The isolation of NSP was done by using water extraction method and designated as water-extractable (WEP) and water un-extractable non starch polysaccharides (WUP). The percentage yield of WEP (0.24 - 1.64%) from water extraction was significantly lower as compared to WUP (2.58 - 4.33%). Upon the incorporation of 5% NSP, the cassava flour showed lower moisture content compared to the sample without the addition of NSP, while fats and crude fiber content of cassava flours were found to be increased upon the incorporation of 5% NSP from all origins. Swelling power and solubility of cassava flour were being reduced upon the incorporation of 5% of NSP from cassava peel and coarse portion of cassava flesh. The changes in dough characteristics showed that water absorption of the samples upon the addition of 5% NSP into wheat flour was found to be higher compared to control wheat flour. In contrast, dough stability and extensibility, tolerance index, resistance to extension, as well as the work input necessary for dough deformation from wheat flour with addition of 5% NSP resulted lower than control wheat flour. Overall, NSP extracted from cassava peels and coarse portion of cassava flesh performed similar characteristics and functional properties upon the incorporation into the flour.
    Matched MeSH terms: Triticum
  20. Sim, S.Y., Noor Aziah, A.A., Teng, T.T., Cheng, L.H.
    MyJurnal
    The effects of food gums addition on wheat dough freeze-thaw and frozen storage stability were studied. Thermal and dynamic mechanical properties of frozen wheat dough without yeast addition were
    determined by means of Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA).
    DSC results revealed that food gums showed the ability to increase freeze-thaw stability in frozen-stored
    samples wherein lower difference in melting enthalpy between first and second freeze-thaw cycle was shown. Based on DMA results, in general, difference between Tg’ and storage temperature (- 18°C) of dough became smaller upon addition of food gums. This may have a practical implication whereby the unfrozen phase could be better protected against physical degradation.
    Matched MeSH terms: Triticum
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links