Displaying publications 21 - 40 of 177 in total

Abstract:
Sort:
  1. Newman-Morris G
    Med J Malaysia, 1974 Dec;29(2):107-9.
    PMID: 4282393
    Matched MeSH terms: Water Pollution/prevention & control
  2. Zieritz A, Lopes-Lima M, Bogan AE, Sousa R, Walton S, Rahim KA, et al.
    Sci Total Environ, 2016 Nov 15;571:1069-78.
    PMID: 27473771 DOI: 10.1016/j.scitotenv.2016.07.098
    Freshwater mussels (Bivalvia, Unionida) fulfil important ecosystem functions and are one of the most threatened freshwater taxa globally. Knowledge of freshwater mussel diversity, distribution and ecology in Peninsular Malaysia is extremely poor, and the conservation status of half of the species presumed to occur in the region has yet to be assessed. We conducted the first comprehensive assessment of Peninsular Malaysia's freshwater mussels based on species presence/absence and environmental data collected from 155 sites spanning all major river catchments and diverse habitat types. Through an integrative morphological-molecular approach we recognised nine native and one widespread non-native species, i.e. Sinanodonta woodiana. Two species, i.e. Pilsbryoconcha compressa and Pseudodon cambodjensis, had not been previously recorded from Malaysia, which is likely a result of morphological misidentifications of historical records. Due to their restriction to single river catchments and declining distributions, Hyriopsis bialata, possibly endemic to Peninsular Malaysia, Ensidens ingallsianus, possibly already extinct in the peninsula, and Rectidens sumatrensis, particularly require conservation attention. Equally, the Pahang, the Perak and the north-western river catchments are of particular conservation value due to the presence of a globally unique freshwater mussel fauna. Statistical relationships of 15 water quality parameters and mussel presence/absence identified acidification and nutrient pollution (eutrophication) as the most important anthropogenic factors threatening freshwater mussel diversity in Peninsular Malaysia. These factors can be linked to atmospheric pollution, deforestation, oil-palm plantations and a lack of functioning waste water treatment, and could be mitigated by establishing riparian buffers and improving waste water treatment for rivers running through agricultural and residential land.
    Matched MeSH terms: Water Pollution, Chemical/analysis*
  3. Najib MZM, Salmiati, Ujang Z, Salim MR, Ibrahim Z, Muda K
    Bioresour Technol, 2016 Dec;221:157-164.
    PMID: 27639234 DOI: 10.1016/j.biortech.2016.08.119
    The developed microbial granules containing photosynthetic pigments had successfully achieved approximately 18-21% of carbon dioxide (CO2) removal in POME for one complete SBR cycle. Also, the granules had reached CO2 removal at 15-29% within 24h and removal of 25% after 5 days. Both results were inconsistent possibly due to the slow mass transfer rate of CO2 from gas to liquid as well as the simultaneous effect of CO2 production and respiration among the microbes. Furthermore, results showed the removal of CO2 from air increases proportionally with the CO2 removed in liquid. The CO2 biofixation of granules attained was approximately 0.23g/L/day for a week. Using the regression model, the removal of CO2 between liquid and gas, CO2 biofixation rate were highly correlated with the treatment time. A statistically significant relationship was obtained between CO2 concentration in liquid, biomass productivity and treatment time for the CO2 biofixation rate of the granules.
    Matched MeSH terms: Water Pollution, Chemical/analysis
  4. Sekaran AS
    Med J Malaysia, 1974 Dec;29(2):97-102.
    PMID: 4282408
    Matched MeSH terms: Water Pollution/prevention & control
  5. Mukred AM, Abd-Hamid A, Hamzah A, Yusoff WM
    Pak J Biol Sci, 2008 Jul 01;11(13):1708-12.
    PMID: 18819623
    The bioremediation of polluted groundwater, wastewater aeration pond and biopond sites was investigated using bacteria isolated from these sites located at the oil refinery Terengganu Malaysia. Out of 62 isolates, only 16 isolates from groundwater (8) and wastewater aeration pond (3) and biopond (5) were chosen based on growth medium containing 1% (v/v) Tapis crude oil. Only four isolates; Acinetobacter faecalis, Staphylococcus sp., Pseudomonas putida and Neisseria elongata showed percentage biodegradation of crude oil more than 50% after 5 days using Mineral Salts Medium (MSM). The effect of physical parameters (temperature, pH and agitation) on growth by all four strains showed a maximum growth in MSM medium with 1% Tapis crude oil at 37 degrees C with pH 7 and agitation of 130 rpm.
    Matched MeSH terms: Water Pollution, Chemical/analysis*
  6. Med J Malaysia, 1974 Dec;29(2):125.
    PMID: 4282397
    Matched MeSH terms: Water Pollution
  7. Mustafa S, Bahar A, Aziz ZA, Darwish M
    J Contam Hydrol, 2020 Aug;233:103662.
    PMID: 32569923 DOI: 10.1016/j.jconhyd.2020.103662
    This article provides an analytical solute transport model to investigate the potential of groundwater contamination by polluted surface water in a two dimensional domain. The clogging of streambed which makes the aquifer partially penetrated by the stream, is considered in the model. The impacts of pumping process, hydraulic conductivity and clogging layer on the quality of water produced from nearby drinking water wells are evaluated. It is found that results are consistent with numerical simulation conducted by MODFLOW software. Moreover, the model is applied using data of contamination occurrence in Malaysia, where high contaminants concentrations are found close to streams. Results show that the pumping activities (rate and time period) are crucial factors when evaluating the risk of groundwater contamination from surface water. Additionally, this study illustrates that the increase in either hydraulic conductivity or leakance coefficient parameters due to the clogging layer will enlarge the area of contamination. The model is able to determine the suitable pumping rate and location of the well so that the contamination plume never reaches the extraction well, which is useful in constructing riverbank filtration sites.
    Matched MeSH terms: Water Pollution
  8. Palani G, Arputhalatha A, Kannan K, Lakkaboyana SK, Hanafiah MM, Kumar V, et al.
    Molecules, 2021 May 10;26(9).
    PMID: 34068541 DOI: 10.3390/molecules26092799
    In the recent decades, development of new and innovative technology resulted in a very high amount of effluents. Industrial wastewaters originating from various industries contribute as a major source of water pollution. The pollutants in the wastewater include organic and inorganic pollutants, heavy metals, and non-disintegrating materials. This pollutant poses a severe threat to the environment. Therefore, novel and innovative methods and technologies need to adapt for their removal. Recent years saw nanomaterials as a potential candidate for pollutants removal. Nowadays, a range of cost-effective nanomaterials are available with unique properties. In this context, nano-absorbents are excellent materials. Heavy metal contamination is widespread in underground and surface waters. Recently, various studies focused on the removal of heavy metals. The presented review article here focused on removal of contaminants originated from industrial wastewater utilizing nanomaterials.
    Matched MeSH terms: Water Pollution
  9. Md Suhaimi Elias, Mohd Suhaimi Hamzah, Mohd Suhaimi Hamzah, Siong, Wee Boon, Nazaratul Ashifa Abdullah Salim
    MyJurnal
    Assessment of source and sediment quality was carried out on marine sediments collected from the Tuanku Abdul Rahman National Park. Enrichment factors (EF), pollution load index (PLI) and geo-accumulation index (Igeo) were used to identify the sources of pollution, degree of contamination and sediment quality, respectively. Elemental analyses of marine sediment samples were performed by using the Instrumental Neutron Activation Analysis (INAA). Results from the Tunku Abdul Rahman National Park of Sabah indicated that most of the elements are considered to be from lithological or natural origin with EF values of less than 2 except for As (10 stations), Cr (3 stations), Lu (5 stations), Mg (2 stations), Sb (6 stations) and U (3 stations). For the sediment quality, most of the study area can be categorised as unpolluted for most of the elements (Igeo value < 2) except for As, Cr, Lu, Mg, Sb and U. A few study areas were slightly low contaminated with As, Cr, Lu, Mg, Sb and U. The contamination of As, Cr, Lu, Mg, Sb and U in the study area can be categorised as moderate with Igeo values ranged from 1 to 2. Meanwhile, the results of PLI value for sediment were ranged from 0.93 to 1.47 (PLI < 50) indicating there are not required to perform drastic rectification measures for the screening of the elements in the Tunku Abdul Rahman Park. Overall, assessment of the sediment quality at the Tunku Abdul Rahman National Park showed a few elements such as As, Cr, Lu, Mg, Sb and U were slightly enriched while most of the elements were similar to background values.
    Matched MeSH terms: Water Pollution, Chemical
  10. Yuhani Jamian, Zainap Lamat, Nurazura Rali
    MyJurnal
    Sungai Sarawak is the most important river in Sarawak. This study was aimed at assessing water quality in the selected stations from Satok bridge to the downstream, Muara Tebas, located along Sungai Sarawak. Water quality trend analysis was conducted to determine the correlation between the water quality parameters. Trend analysis was carried out using Mann-Kendall Test because data collected was non-parametric. Next, Spearman rank was used in order to determine the correlation between parameters. The results obtained and the observation made in this study reveals that the trend exists only for Chemical Oxygen Value (COD). But there are trends for Biochemical Oxygen Demand, (BOD), Dissolved Oxygen (DO), Total Suspended Solid (TSS), Ammoniacal Nitrogen (NH4N) and Turbidity to decrease or increase with no trends between 2007 and 2011. The correlation between parameters is not very strong because there are many determinants of water quality parameters. The result from this study would provide useful information for water quality management in order to maintain and improve the water quality of Sungai Sarawak.
    Matched MeSH terms: Water Pollution, Chemical
  11. Yusof, N., Jaswir, I., Jamal, P., Jami, M.S., Octavianti, F.
    MyJurnal
    Extraction of gelatin using traditional acid-base pretreatment method has several limitations
    such as time consuming and causes serious water pollution. Chemical treatment often being used
    as an alternative process to overcome the weaknesses of the conventional method. However,
    excessive chemical elements would damage the structure of the gelatin due to its high sensitivity
    to the acid content. High Pressure Processing (HPP) is a novel and environmental friendly
    method that has been suggested to assist gelatin extraction. Pressurization during pretreatment
    could reduce the extraction time and amount of acid used. It also has a potential in enhancing the
    properties of the gelatin extract and increasing the gelatin yield. In this research, One-Factor-
    at-Time (OFAT) and optimization study were done to determine the optimum parameters for
    extraction of gelatin assisted by HPP from red tilapia skin. Four parameters; applied pressure,
    pressure holding time, ratio of acid to skin and extraction time have been selected for the OFAT
    design and concentration of the gelatin extract and percentage of yield gelatin were evaluated.
    From OFAT, optimum technical parameters for response surface optimization design were 250
    MPa pressure, 7.5 ml of acid to 1 g of skin and 12 hours extraction time. Pressure holding
    time was fixed for 10 min. FCCCD has been used for optimization study. Results from the
    data shows that the optimum conditions for gelatin extraction from red tilapia skin were 250
    MPa for pressure, 10 min of pressure holding time, 7.5 ml of acid for 1 g of skin and 12 hours
    of extraction time while the maximum concentration and yield were 19.51 mg/ml and 32.04%
    (320.4 mg/g), respectively. These findings proved that HPP could increase the concentration
    and the yield of the gelatin while reducing the chemical waste and shortening the extraction
    process.
    Matched MeSH terms: Water Pollution
  12. Mohammad H, Sharifuddin Mohd Zain, Rashid Atta Khan, Khalisanni Khalid
    Sains Malaysiana, 2014;43:1915-1925.
    Spillage of water polluting substances via industrial disaster may cause pollution to our environment. Thus, reversed-flow gas chromatography (RF-GC) technique, which applies flow perturbation gas chromatography, was used to investigate the evaporation and estimate the diffusion coefficients of liquid pollutants. Selected alcohols (99.9% purity) and its mixtures were used as samples. The evaporating liquids (stationary phase) were carried out by carrier gas-nitrogen, 99.9% purity (mobile phase) to the detector. The findings of this work showed the physicochemical measurements may vary depending on the composition of water and alcohol mixtures, temperature of the mixtures, as well as the types of alcohol used. This study implies that there is a variation in the results based on the concentration, types and temperature of the liquids that may contribute in the references for future research in the area of environmental pollution analysis.
    Matched MeSH terms: Water Pollution
  13. Norshidah Baharuddin, Nor'ashikin Saim, Sharifuddin M. Zain, Hafizan Juahir, Rozita Osman, Aziah Aziz
    Sains Malaysiana, 2014;43:1355-1362.
    Water pollution has become a growing threat to human society and natural ecosystem in recent decades, increasing the need to better understand the variabilities of pollutants within aquatic systems. This study presents the application of two chemometric techniques, namely, cluster analysis (CA) and principal component analysis (PCA). This is to classify and identify the water quality variables into groups of similarities or dissimilarities and to determine their significance. Six stations along Kinta River, Perak, were monitored for 30 physical and chemical parameters during the period of 1997-2006. Using CA, the 30 physical and chemical parameters were classified into 4 clusters; PCA was applied to the datasets and resulted in 10 varifactors with a total variance of 78.06%. The varifactors obtained indicated the significance of each of the variables to the pollution of Kinta River.
    Matched MeSH terms: Water Pollution
  14. Izyan Munirah M. Zaideen, Suhaimi Suratman, Norhayati Mohd Tahir
    Sains Malaysiana, 2017;46:1513-1520.
    This study investigates the spatial variation of water quality parameters in Sungai Setiu Basin at ten different locations from March 2010 to February 2011. The water quality was assessed using the Water Quality Index by Malaysian Department of Environment (DOE-WQI) and classified according to the Malaysia Interim National Water Quality Standard (INWQS). Six water quality parameters embedded in the DOE-WQI were dissolved oxygen (DO), biochemical oxygen demand (BOD), chemical oxygen demand (COD), pH, ammoniacal nitrogen (AN) and total suspended solid (TSS). In addition, this study also examined the changes in water quality over the past 10 years by comparing the present water quality to the previous works. The overall mean WQI value obtained was 84.0 which indicate that the Sungai Setiu basin is in clean condition and all measured water quality parameters gave value within the permissible limits of the INWQS classification except for pH which fall in Class III. It can be concluded that water quality in Sungai Setiu does not varies greatly over a decade. Hence continuous monitoring is needed to improve the water quality and minimize water pollution.
    Matched MeSH terms: Water Pollution
  15. Gazzaz NM, Yusoff MK, Aris AZ, Juahir H, Ramli MF
    Mar Pollut Bull, 2012 Nov;64(11):2409-20.
    PMID: 22925610 DOI: 10.1016/j.marpolbul.2012.08.005
    This article describes design and application of feed-forward, fully-connected, three-layer perceptron neural network model for computing the water quality index (WQI)(1) for Kinta River (Malaysia). The modeling efforts showed that the optimal network architecture was 23-34-1 and that the best WQI predictions were associated with the quick propagation (QP) training algorithm; a learning rate of 0.06; and a QP coefficient of 1.75. The WQI predictions of this model had significant, positive, very high correlation (r=0.977, p<0.01) with the measured WQI values, implying that the model predictions explain around 95.4% of the variation in the measured WQI values. The approach presented in this article offers useful and powerful alternative to WQI computation and prediction, especially in the case of WQI calculation methods which involve lengthy computations and use of various sub-index formulae for each value, or range of values, of the constituent water quality variables.
    Matched MeSH terms: Water Pollution/analysis*; Water Pollution/statistics & numerical data
  16. Kathuria V
    J Environ Manage, 2006 Mar;78(4):405-26.
    PMID: 16171929
    The policy prescription for solving environmental problems of developing countries and countries-in-transition (CIT) is slowly getting polarized into two viewpoints. One group of researchers and policy advocates including multilateral organizations upholds extensive use of market based instruments (MBIs) in these countries. The other group argues that institutions need to be built first or the policy makers should select the incremental or tiered approach taking into account the existing capabilities. The group also insists that the financial, institutional and political constraints make environmental regulation in these countries more problematic than in industrialized countries. In the short-run, the immediate needs of the developing countries can be addressed effectively by learning lessons from the difficulties encountered by a few successful cases and accordingly evolving an appropriate policy instrument. In this paper an attempt has been made to highlight three such cases from three different parts of the world--Malaysia (Asia-pacific), Poland (Eastern Europe) and Colombia (Latin America). The paper looks into what policy instruments led to a fall in water pollution levels in these countries and what role did MBIs play in this pollution mitigation? The case studies suggest that it is a combination of instruments--license fee, standards, charge and subsidies--reinforced by active enforcement that led to an overall improvement in environment compliance.
    Matched MeSH terms: Water Pollution/economics; Water Pollution/prevention & control*
  17. Mohd Zaideen IM
    Mar Pollut Bull, 2019 Nov;148:3-4.
    PMID: 31422300 DOI: 10.1016/j.marpolbul.2019.07.041
    The strategic location of Malaysia along the world's busiest trade waterways underscores the need to cope ballast water issues for both domestic and international shipping. The adoption of Ballast Water Management Convention 2004 (BWMC) by the International Maritime Organization is suitable for management plans intended to prevent the introduction of invasive species through ballast water discharge. Malaysia has ratified the BWMC in September 2010 and the Convention has come into force in September 2017. However up to now, the BWMC has not been fully implemented by Malaysia for ships operating in its waters. This paper analyse the headway in implementing the provisions of the BWMC in Malaysia as well as the issues and challenges encountered for the implementation. The paper concludes that Malaysian government should promulgate laws and policies to clearly communicate on ballast water issues to the shipping industry communities.
    Matched MeSH terms: Water Pollution/legislation & jurisprudence; Water Pollution/prevention & control*
  18. Wilkinson JL, Boxall ABA, Kolpin DW, Leung KMY, Lai RWS, Galbán-Malagón C, et al.
    Proc Natl Acad Sci U S A, 2022 Feb 22;119(8).
    PMID: 35165193 DOI: 10.1073/pnas.2113947119
    Environmental exposure to active pharmaceutical ingredients (APIs) can have negative effects on the health of ecosystems and humans. While numerous studies have monitored APIs in rivers, these employ different analytical methods, measure different APIs, and have ignored many of the countries of the world. This makes it difficult to quantify the scale of the problem from a global perspective. Furthermore, comparison of the existing data, generated for different studies/regions/continents, is challenging due to the vast differences between the analytical methodologies employed. Here, we present a global-scale study of API pollution in 258 of the world's rivers, representing the environmental influence of 471.4 million people across 137 geographic regions. Samples were obtained from 1,052 locations in 104 countries (representing all continents and 36 countries not previously studied for API contamination) and analyzed for 61 APIs. Highest cumulative API concentrations were observed in sub-Saharan Africa, south Asia, and South America. The most contaminated sites were in low- to middle-income countries and were associated with areas with poor wastewater and waste management infrastructure and pharmaceutical manufacturing. The most frequently detected APIs were carbamazepine, metformin, and caffeine (a compound also arising from lifestyle use), which were detected at over half of the sites monitored. Concentrations of at least one API at 25.7% of the sampling sites were greater than concentrations considered safe for aquatic organisms, or which are of concern in terms of selection for antimicrobial resistance. Therefore, pharmaceutical pollution poses a global threat to environmental and human health, as well as to delivery of the United Nations Sustainable Development Goals.
    Matched MeSH terms: Water Pollution, Chemical/analysis*; Water Pollution, Chemical/prevention & control*
  19. Zabed H, Suely A, Faruq G, Sahu JN
    Sci Total Environ, 2014 Feb 15;472:363-9.
    PMID: 24295752 DOI: 10.1016/j.scitotenv.2013.11.051
    A sacred ritual well with continuously discharging of methane gas through its water body was studied for physicochemical and microbiological quality in three seasons and during ritual mass bathing. Most of the physicochemical parameters showed significant seasonal variations (P<0.05) and a sharp fluctuation during mass bathing. Dissolved oxygen (DO) was found negatively correlated with temperature (r=-0.384, P<0.05), biochemical oxygen demand (BOD) (r=-0.58, P<0.001) and ammonia (r=-0.738, P<0.001), while BOD showed positive correlation with chemical oxygen demand (COD) (r=0.762, P<0.001) and ammonia (r=0.83, P<0.001). Simple regression analysis also yielded significant linear relationship in DO vs. temperature (r(2)=0.147, P<0.05), DO vs. ammonia (r(2)=0.544, P<0.001) and BOD vs. DO (r(2)=0.336, P<0.001). A total of eight microbial indicators were studied and found that all of them increased unusually during mass bathing comparing with their respective seasonal values. Total coliforms (TC) were found positively correlated with fecal coliforms (FC) (r=0.971), FC with Escherichia coli (EC) (r=0.952), EC with intestinal enterococci (IE) (r=0.921), fecal streptococci (FS) with IE (r=0.953) and Staphylococcus aureus (SA) with Pseudomonas aeruginosa (PA) (r=0.946), which were significant at P<0.001. Some regression models showed significant linear relationship at P<0.001 with r(2) value of 0.943 for FC vs. TC, 0.907 for EC vs. FC, 0.869 for FS vs. FC, 0.848 for IE vs. EC and 0.909 for IE vs. FS. The overall results found in this study revealed that well water is suitable for bathing purpose but the religious activity considerably worsen its quality.
    Matched MeSH terms: Water Pollution/analysis*; Water Pollution/statistics & numerical data
  20. Shuhaimi-Othman M, Mushrifah I, Lim EC, Ahmad A
    Environ Monit Assess, 2008 Aug;143(1-3):345-54.
    PMID: 17987397
    Water from 15 sampling stations in Tasik Chini (Chini Lake), Peninsular Malaysia were sampled for 12 months from September 2004 until August 2005 and analyzed for 11 metals including iron (Fe), aluminum (Al), manganese (Mn), barium (Ba), zinc (Zn), lead (Pb), copper (Cu), cadmium (Cd), nickel (Ni), chromium (Cr) and cobalt (Co). Results showed that the mean (min-max) metal concentrations (in micrograms per liter) in Tasik Chini waters for the 12 months sampling based on 15 sampling stations (in descending order) for Fe, Al, Mn, Ba, Zn, Pb, Cu and Cd were 794.84 (309.33-1609.07), 194.53 (62.37-665.93), 29.16 (16.68-79.85), 22.07 (15.64-29.71), 5.12 (2.224-6.553), 2.36 (1.165-4.240), 0.832 (0.362-1.443) and 0.421 (0.254-0.696) respectively. Concentration for three metals i.e. Ni, Cr and Co were too low and not detected by the graphite furnace Atomic Absorption Spectrophotometry (AAS). Comparison with various water quality standards showed that the mean metals concentration in surface water of Tasik Chini were low and within the range of natural background except for Fe and Al. In general, metal concentrations in Tasik Chini water varied temporally and spatially. The main factors influencing these metal concentrations in the water were the raining season and mining activities. Stations located at Tanjung Jerangking and Melai areas were the most effected due to those factors.
    Matched MeSH terms: Water Pollution/analysis*; Water Pollution/prevention & control
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links