Displaying publications 21 - 40 of 280 in total

Abstract:
Sort:
  1. Hamid RA, Nazar R, Pop I
    Sci Rep, 2015;5:14640.
    PMID: 26440761 DOI: 10.1038/srep14640
    The paper deals with a stagnation-point boundary layer flow towards a permeable stretching/shrinking sheet in a nanofluid where the flow and the sheet are not aligned. We used the Buongiorno model that is based on the Brownian diffusion and thermophoresis to describe the nanofluid in this problem. The main purpose of the present paper is to examine whether the non-alignment function has the effect on the problem considered when the fluid suction and injection are imposed. It is interesting to note that the non-alignment function can ruin the symmetry of the flows and prominent in the shrinking sheet. The fluid suction will reduce the impact of the non-alignment function of the stagnation flow and the stretching/shrinking sheet but at the same time increasing the velocity profiles and the shear stress at the surface. Furthermore, the effects of the pertinent parameters such as the Brownian motion, thermophoresis, Lewis number and the suction/injection on the flow and heat transfer characteristics are also taken into consideration. The numerical results are shown in the tables and the figures. It is worth mentioning that dual solutions are found to exist for the shrinking sheet.
    Matched MeSH terms: Motion
  2. Chen RP, Chen Z, Chew KH, Li PG, Yu Z, Ding J, et al.
    Sci Rep, 2015;5:10628.
    PMID: 26024434 DOI: 10.1038/srep10628
    A caustic vector vortex optical field is experimentally generated and demonstrated by a caustic-based approach. The desired caustic with arbitrary acceleration trajectories, as well as the structured states of polarization (SoP) and vortex orders located in different positions in the field cross-section, is generated by imposing the corresponding spatial phase function in a vector vortex optical field. Our study reveals that different spin and orbital angular momentum flux distributions (including opposite directions) in different positions in the cross-section of a caustic vector vortex optical field can be dynamically managed during propagation by intentionally choosing the initial polarization and vortex topological charges, as a result of the modulation of the caustic phase. We find that the SoP in the field cross-section rotates during propagation due to the existence of the vortex. The unique structured feature of the caustic vector vortex optical field opens the possibility of multi-manipulation of optical angular momentum fluxes and SoP, leading to more complex manipulation of the optical field scenarios. Thus this approach further expands the functionality of an optical system.
    Matched MeSH terms: Motion
  3. Muhammad Khairul Anuar Mohamed, Nor Aida Zuraimi Md Noar, Mohd Zuki Salleh, Anuar Ishak
    Sains Malaysiana, 2016;45:189-296.
    In this paper, the problem of free convection boundary layer flow on a horizontal circular cylinder in a nanofluid with viscous dissipation and constant wall temperature is investigated. The transformed boundary layer equations are solved numerically using finite difference scheme namely the Keller-box method. Numerical solutions were obtained for the reduced skin friction coefficient, Nusselt number and Sherwood number as well as the velocity and temperature profiles.The features of the flow and heat transfer characteristics for various values of the Brownian motion parameter, thermophoresis parameter, Lewis number and Eckert number were analyzed and discussed.
    Matched MeSH terms: Motion
  4. Tso CP, Hor CH, Chen GM, Kok CK
    Heliyon, 2018 Dec;4(12):e01085.
    PMID: 30627676 DOI: 10.1016/j.heliyon.2018.e01085
    The synovial fluid motion in an artificial hip joint is important in understanding the thermo-fluids effects that can affect the reliability of the joint, although it is difficult to be studied theoretically, as the modelling involves the viscous fluid interacting with a moving surface. A new analytical solution has been derived for the maximum induced fluid motion within a spherical gap with an oscillating lower surface and a stationary upper surface, assuming one-dimensional incompressible laminar Newtonian flow with constant properties, and using the Navier-Stokes equation. The resulting time-dependent motion is analysed in terms of two dimensionless parameters R and β, which are functions of geometry, fluid properties and the oscillation rate. The model is then applied to the conditions of the synovial fluid enclosed in the artificial hip joint and it is found that the motion may be described by a simpler velocity variation, whereby laying the foundation to thermal studies in the joint.
    Matched MeSH terms: Motion
  5. Abdal S, Hussain S, Siddique I, Ahmadian A, Ferrara M
    Sci Rep, 2021 Apr 08;11(1):7799.
    PMID: 33833251 DOI: 10.1038/s41598-021-86953-1
    It is a theoretical exportation for mass transpiration and thermal transportation of Casson nanofluid over an extending cylindrical surface. The Stagnation point flow through porous matrix is influenced by magnetic field of uniform strength. Appropriate similarity functions are availed to yield the transmuted system of leading differential equations. Existence for the solution of momentum equation is proved for various values of Casson parameter [Formula: see text], magnetic parameter M, porosity parameter [Formula: see text] and Reynolds number Re in two situations of mass transpiration (suction/injuction). The core interest for this study aroused to address some analytical aspects. Therefore, existence of solution is proved and uniqueness of this results is discussed with evaluation of bounds for existence of solution. Results for skin friction factor are established to attain accuracy for large injection values. Thermal and concentration profiles are delineated numerically by applying Runge-Kutta method and shooting technique. The flow speed retards against M, [Formula: see text] and [Formula: see text] for both situations of mass injection and suction. The thermal boundary layer improves with Brownian and thermopherotic diffusions.
    Matched MeSH terms: Motion
  6. Alsabery AI, Tayebi T, Chamkha AJ, Hashim I
    Sci Rep, 2020 Oct 22;10(1):18048.
    PMID: 33093608 DOI: 10.1038/s41598-020-75095-5
    This study investigates thermal natural convective heat transfer in a nanofluid filled-non-Darcian porous and wavy-walled domain under the local thermal non-equilibrium condition. The considered cavity has corrugated and cold vertical walls and insulated horizontal walls except the heated part positioned at the bottom wall. The transport equations in their non-dimensional model are numerically solved based on the Galerkin finite-element discretization technique. The dimensionless governing parameters of the present work are the nanoparticle in volume concentration, the Darcy number, number of undulations, modified heat conductivity ratio, dimensionless heated part length, and location. Comparisons with other published theoretical and experimental results show good agreement with the present outcomes. The findings indicate that the heater length, its position, and the waves number on the side vertical walls as well as the nanoparticles concentration can be the control parameters for free convective motion and heat transport within the wavy cavity.
    Matched MeSH terms: Motion
  7. Mohd Firdaus Abdul Razak, Mohd Saiful Aizat Mohd Shafie, Muhamad Sharafee Shamsudin, Muhamad Faris Che Aminudin
    MyJurnal
    The main objective of this study is to compare the execution times produced by fending off techniques of Seni Silat Cekak Malaysia (SSCM), Kaedah A for different movement trajectories. Three kind of movement trajectories for Kaedah A were carried out, which were Trajectory A (normal path), Trajectory B (curve path) and Trajectory C (starting by pulling the hand to the back and continue as Trajectory A). The experiments were conducted using a motion capture system. The movement position of the left hand during the execution of Kaedah A were recorded by a Kinect sensor, prior to storing and processing via Virtual Sensei (VS) Lite software. A total of four (4) experienced practitioners from SSCM were selected to perform Kaedah A techniques. The data acquired were further analyzed to determine their kinematic characteristics. The results showed that the execution of Kaedah A using Trajectory A produced the shortest time and highest velocity with averages of 0.071±0.007s and 6.438±0.863ms-1 respectively, compared to Trajectory B (0.087±0.011s, 5.230±0.578 ms-1) and Trajectory C (0.149±0.015s, 2.903±0.273ms-1). Therefore, Trajectory A is considered to be more efficient than Trajectory B and Trajectory C in terms of execution times and maximum velocity produced by Kaedah A.
    Matched MeSH terms: Motion
  8. Ahmad NS
    Sensors (Basel), 2020 Jun 30;20(13).
    PMID: 32630046 DOI: 10.3390/s20133673
    Motion control involving DC motors requires a closed-loop system with a suitable compensator if tracking performance with high precision is desired. In the case where structural model errors of the motors are more dominating than the effects from noise disturbances, accurate system modelling will be a considerable aid in synthesizing the compensator. The focus of this paper is on enhancing the tracking performance of a wheeled mobile robot (WMR), which is driven by two DC motors that are subject to model parametric uncertainties and uncertain deadzones. For the system at hand, the uncertain nonlinear perturbations are greatly induced by the time-varying power supply, followed by behaviour of motion and speed. In this work, the system is firstly modelled, where correlations between the model parameters and different input datasets as well as voltage supply are obtained via polynomial regressions. A robust H ∞ -fuzzy logic approach is then proposed to treat the issues due to the aforementioned perturbations. Via the proposed strategy, the H ∞ controller and the fuzzy logic (FL) compensator work in tandem to ensure the control law is robust against the model uncertainties. The proposed technique was validated via several real-time experiments, which showed that the speed and path tracking performance can be considerably enhanced when compared with the results via the H ∞ controller alone, and the H ∞ with the FL compensator, but without the presence of the robust control law.
    Matched MeSH terms: Motion
  9. Teng XJ, Ng WM, Chong WH, Chan DJC, Mohamud R, Ooi BS, et al.
    Langmuir, 2021 08 03;37(30):9192-9201.
    PMID: 34255525 DOI: 10.1021/acs.langmuir.1c01345
    The changes in the transport behavior of a microswimmer before and after cargo loading are crucial to understanding and control of the motion of a biohybrid microbot. In this work, we show the change in swimming behavior of biflagellated microalgae Chlamydomonas reinhardtii picking up a 4.5 μm polystyrene microbead upon collision. The microswimmer changed from linear forward motion into helical motion upon the attachment of the cargo and swam with a decreased swimming velocity. We revealed the helical motion of the microswimmer upon cargo loading due to suppression of flagella by image analysis of magnified time-lapse images of C. reinhardtii with one microbead attached at the anterior end (between the flagella). Furthered suppression on the flagellum imposed by the loading of the second cargo has led to increased oscillation per displacement traveled and decreased swimming velocity. Moreover, the microswimmer with a microbead attached at the posterior end swam with swimming velocity close to free swimming microalgae and did not exhibit helical swimming behavior. The experimental results and analysis showed that the loading location of the cargo has a great influence over the swimming behavior of the microswimmer. Furthermore, the work balance calculation and mathematical analysis based on Lighthill's model are well consistent with our experimental findings.
    Matched MeSH terms: Motion
  10. Rasedee AFN, Abdul Sathar MH, Othman KI, Hamzah SR, Ishak N
    PLoS One, 2021;16(2):e0246904.
    PMID: 33577619 DOI: 10.1371/journal.pone.0246904
    Differential equations are commonly used to model various types of real life applications. The complexity of these models may often hinder the ability to acquire an analytical solution. To overcome this drawback, numerical methods were introduced to approximate the solutions. Initially when developing a numerical algorithm, researchers focused on the key aspect which is accuracy of the method. As numerical methods becomes more and more robust, accuracy alone is not sufficient hence begins the pursuit of efficiency which warrants the need for reducing computational cost. The current research proposes a numerical algorithm for solving initial value higher order ordinary differential equations (ODEs). The proposed algorithm is derived as a three point block multistep method, developed in an Adams type formulae (3PBCS) and will be used to solve various types of ODEs and systems of ODEs. Type of ODEs that are selected varies from linear to nonlinear, artificial and real life problems. Results will illustrate the accuracy and efficiency of the proposed three point block method. Order, stability and convergence of the method are also presented in the study.
    Matched MeSH terms: Motion
  11. Mohd Ashraf Ahmad, Zaharuddin Mohamed
    MyJurnal
    This paper presents investigations into the development of control schemes for end-point vibration
    suppression and input tracking of a flexible manipulator. A constrained planar single-link flexible manipulator is considered and the dynamic model of the system is derived using the assumed mode method. To study the effectiveness of the controllers, a Linear Quadratic Regulator (LQR) was initially developed for control of rigid body motion. This is then extended to incorporate a noncollocated PID controller and a feedforward controller based on input shaping techniques to control vibration (flexible motion) of the system. For feedforward controller, positive and modified specified negative amplitude (SNA) input shapers are proposed and designed based on the properties of the system. Results from the simulation of the manipulator responses with the controllers are presented in time and frequency domains. The performances of the control schemes are assessed in terms of level of vibration reduction, input tracking capability and time response specifications. Finally, a comparative assessment of the control techniques is presented and discussed.
    Matched MeSH terms: Motion
  12. Corrado R, Lacorata G, Palatella L, Santoleri R, Zambianchi E
    Sci Rep, 2017 04 11;7:46291.
    PMID: 28397797 DOI: 10.1038/srep46291
    The multi-scale and nonlinear nature of the ocean dynamics dramatically affects the spreading of matter, like pollutants, marine litter, etc., of physical and chemical seawater properties, and the biological connectivity inside and among different basins. Based on the Finite-Scale Lyapunov Exponent analysis of the largest available near-surface Lagrangian data set from the Global Drifter Program, our results show that, despite the large variety of flow features, relative dispersion can ultimately be described by a few parameters common to all ocean sub-basins, at least in terms of order of magnitude. This provides valuable information to undertake Lagrangian dispersion studies by means of models and/or of observational data. Moreover, our results show that the relative dispersion rates measured at submesoscale are significantly higher than for large-scale dynamics. Auxiliary analysis of high resolution GPS-tracked drifter hourly data as well as of the drogued/undrogued status of the buoys is provided in support of our conclusions. A possible application of our study, concerning reverse drifter motion and error growth analysis, is proposed relatively to the case of the missing Malaysia Airlines MH370 aircraft.
    Matched MeSH terms: Motion
  13. Tang, S.H., Khaksar, W., Ismail, N.B., Ariffin, M.K.A.
    MyJurnal
    The ability of a robot to plan its own motion seems pivotal to its autonomy, and that is why the motion planning has become part and parcel of modern intelligent robotics. In this paper, about 100 research are reviewed and briefly described to identify and classify the amount of the existing work for each motion planning approach. Meanwhile, around 200 research were used to determine the percentage of the application of each approach. The paper includes comparative tables and charts showing the application frequency of each approach in the last 30 years. Finally, some open areas and challenging topics are presented based on the reviewed papers.
    Matched MeSH terms: Motion
  14. Arifin, N.M., Mokhtar, N.F.M., Nazar, R., Pop, I.
    ASM Science Journal, 2007;1(1):57-62.
    MyJurnal
    Linear stability analysis was used to investigate the onset of Marangoni convection in a two-layer system. The system comprised a saturated porous layer over which was a layer of the same fluid. The fluid was heated from below and the upper free surface was deformable. At the interface between the fluid and the porous layer, the Beavers-Joseph slip condition was used and in the porous medium the Darcy law was employed to describe the flow. Predictions for the onset of convection were obtained from the analysis by the perturbation technique. The effect of surface deformation and depth ratio, z (which is equal to the depth of the fluid layer/depth of the porous layer) on the onset of fluid motion was studied in detail.
    Matched MeSH terms: Motion
  15. Sharif, J.M., Latiff, M.S.A., Ngadi, M.A.
    ASM Science Journal, 2007;1(2):109-128.
    MyJurnal
    Spatio-temporal datasets are a collection of datasets where data can vary in both space and time. Theoretically, such datasets can be considered as continuous and discrete. For example, specification of the function, F: Ed  T Rn, where Ed denotes d-dimensional Euclidean space, T = R* ∩ {} the domain of time and Rn an n-dimensional scalar field. Examples of such data sets include time-varying simulation results, film and videos, time-varying medical datasets, geometry models with motion or deformation, meteorological measurements, and many more. It is therefore highly desirable to use visualisation to summarize meaningful information in higher dimensional spatio-temporal datasets. Our aim is to conceive an efficient visual study to facilitate scientists in identifying temporal association among complex and chaotic atom movements in ion trajectories. An application that uses a streamline for spatial motion of ion trajectories and Colour Number Coding Scheme for temporal encoding of high degree of timeline events among mobile ions is proposed. With an anthology of the visual examples, it was revealed that this application would be beneficial for scientists to visually mine any 3D spatio-temporal dataset.
    Matched MeSH terms: Motion
  16. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2018 Jun 15;120(24):241801.
    PMID: 29956995 DOI: 10.1103/PhysRevLett.120.241801
    A search for physics beyond the standard model in events with one or more high-momentum Higgs bosons, H, decaying to pairs of b quarks in association with missing transverse momentum is presented. The data, corresponding to an integrated luminosity of 35.9  fb^{-1}, were collected with the CMS detector at the LHC in proton-proton collisions at the center-of-mass energy sqrt[s]=13  TeV. The analysis utilizes a new b quark tagging technique based on jet substructure to identify jets from H→bb[over ¯]. Events are categorized by the multiplicity of H-tagged jets, jet mass, and the missing transverse momentum. No significant deviation from standard model expectations is observed. In the context of supersymmetry (SUSY), limits on the cross sections of pair-produced gluinos are set, assuming that gluinos decay to quark pairs, H (or Z), and the lightest SUSY particle, LSP, through an intermediate next-to-lightest SUSY particle, NLSP. With large mass splitting between the NLSP and LSP, and 100% NLSP branching fraction to H, the lower limit on the gluino mass is found to be 2010 GeV.
    Matched MeSH terms: Motion
  17. Farah Kamil, Tang, S.H., Zulkifli, N., Ahmad, S.A., Khaksar, W.
    MyJurnal
    Robotic navigation has remained an open issue through the last two decades. Mobile robot
    is required to navigate safely to goal location in presence of obstacles. Recently the use of mobile
    robot in unknown dynamic environment has significantly increased. The aim of this paper is to offer a
    comprehensive review over different approaches to mobile robots in dynamic environments,
    particularly on how they solve many issues that face the researchers recently. This paper also explains
    the advantages and drawbacks of each reviewed paper. The authors decide to categorize these articles
    based on the entire content of each paper into ten common challenges which have been discussed in
    this paper, including: traveling distance, traveling time, safety, motion control, smooth path, future
    prediction, stabilization, competence, precision, and low computation cost. Finally, some open areas
    and challenging topics are offered according to the articles mentioned.
    Matched MeSH terms: Motion
  18. Sibidanov A, Varvell KE, Adachi I, Aihara H, Al Said S, Asner DM, et al.
    Phys Rev Lett, 2018 Jul 20;121(3):031801.
    PMID: 30085771 DOI: 10.1103/PhysRevLett.121.031801
    We report the results of a search for the rare, purely leptonic decay B^{-}→μ^{-}ν[over ¯]_{μ} performed with a 711  fb^{-1} data sample that contains 772×10^{6}  BB[over ¯] pairs, collected near the ϒ(4S) resonance with the Belle detector at the KEKB asymmetric-energy e^{+}e^{-} collider. The signal events are selected based on the presence of a high momentum muon and the topology of the rest of the event showing properties of a generic B-meson decay, as well as the missing energy and momentum being consistent with the hypothesis of a neutrino from the signal decay. We find a 2.4 standard deviation excess above background including systematic uncertainties, which corresponds to a branching fraction of B(B^{-}→μ^{-}ν[over ¯]_{μ})=(6.46±2.22±1.60)×10^{-7} or a frequentist 90% confidence level interval on the B^{-}→μ^{-}ν[over ¯]_{μ} branching fraction of [2.9,10.7]×10^{-7}.
    Matched MeSH terms: Motion
  19. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2018 Aug 10;121(6):062002.
    PMID: 30141647 DOI: 10.1103/PhysRevLett.121.062002
    The pseudorapidity distributions of dijets as functions of their average transverse momentum (p_{T}^{ave}) are measured in proton-lead (pPb) and proton-proton (pp) collisions. The data samples were collected by the CMS experiment at the CERN LHC, at a nucleon-nucleon center-of-mass energy of 5.02 TeV. A significant modification of the pPb spectra with respect to the pp spectra is observed in all p_{T}^{ave} intervals investigated. The ratios of the pPb and pp distributions are compared to next-to-leading order perturbative quantum chromodynamics calculations with unbound nucleon and nuclear parton distribution functions (PDFs). These results give the first evidence that the gluon PDF at large Bjorken x in lead ions is strongly suppressed with respect to the PDF in unbound nucleons.
    Matched MeSH terms: Motion
  20. Gradoni G, Russer J, Baharuddin MH, Haider M, Russer P, Smartt C, et al.
    Philos Trans A Math Phys Eng Sci, 2018 Oct 29;376(2134).
    PMID: 30373944 DOI: 10.1098/rsta.2017.0455
    This paper reviews recent progress in the measurement and modelling of stochastic electromagnetic fields, focusing on propagation approaches based on Wigner functions and the method of moments technique. The respective propagation methods are exemplified by application to measurements of electromagnetic emissions from a stirred, cavity-backed aperture. We discuss early elements of statistical electromagnetics in Heaviside's papers, driven mainly by an analogy of electromagnetic wave propagation with heat transfer. These ideas include concepts of momentum and directionality in the realm of propagation through confined media with irregular boundaries. We then review and extend concepts using Wigner functions to propagate the statistical properties of electromagnetic fields. We discuss in particular how to include polarization in this formalism leading to a Wigner tensor formulation and a relation to an averaged Poynting vector.This article is part of the theme issue 'Celebrating 125 years of Oliver Heaviside's 'Electromagnetic Theory''.
    Matched MeSH terms: Motion
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links