Displaying publications 21 - 40 of 47 in total

Abstract:
Sort:
  1. Search for Physics Beyond the Standard Model in Events with High-Momentum Higgs Bosons and Missing Transverse Momentum in Proton-Proton Collisions at 13 TeV
    Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2018 Jun 15;120(24):241801.
    PMID: 29956995 DOI: 10.1103/PhysRevLett.120.241801
    A search for physics beyond the standard model in events with one or more high-momentum Higgs bosons, H, decaying to pairs of b quarks in association with missing transverse momentum is presented. The data, corresponding to an integrated luminosity of 35.9  fb^{-1}, were collected with the CMS detector at the LHC in proton-proton collisions at the center-of-mass energy sqrt[s]=13  TeV. The analysis utilizes a new b quark tagging technique based on jet substructure to identify jets from H→bb[over ¯]. Events are categorized by the multiplicity of H-tagged jets, jet mass, and the missing transverse momentum. No significant deviation from standard model expectations is observed. In the context of supersymmetry (SUSY), limits on the cross sections of pair-produced gluinos are set, assuming that gluinos decay to quark pairs, H (or Z), and the lightest SUSY particle, LSP, through an intermediate next-to-lightest SUSY particle, NLSP. With large mass splitting between the NLSP and LSP, and 100% NLSP branching fraction to H, the lower limit on the gluino mass is found to be 2010 GeV.
    Matched MeSH terms: Physics
  2. Search for Physics beyond the Standard Model in Events with Overlapping Photons and Jets
    Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Bergauer T, Brandstetter J, et al.
    Phys Rev Lett, 2019 Dec 13;123(24):241801.
    PMID: 31922872 DOI: 10.1103/PhysRevLett.123.241801
    Results are reported from a search for new particles that decay into a photon and two gluons, in events with jets. Novel jet substructure techniques are developed that allow photons to be identified in an environment densely populated with hadrons. The analyzed proton-proton collision data were collected by the CMS experiment at the LHC, in 2016 at sqrt[s]=13  TeV, and correspond to an integrated luminosity of 35.9  fb^{-1}. The spectra of total transverse hadronic energy of candidate events are examined for deviations from the standard model predictions. No statistically significant excess is observed over the expected background. The first cross section limits on new physics processes resulting in such events are set. The results are interpreted as upper limits on the rate of gluino pair production, utilizing a simplified stealth supersymmetry model. The excluded gluino masses extend up to 1.7 TeV, for a neutralino mass of 200 GeV and exceed previous mass constraints set by analyses targeting events with isolated photons.
    Matched MeSH terms: Physics
  3. Fulltext Search for new physics in same-sign dilepton events in proton-proton collisions at [Formula: see text]
    Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Asilar E, Bergauer T, et al.
    Eur Phys J C Part Fields, 2016;76(8):439.
    PMID: 28303081 DOI: 10.1140/epjc/s10052-016-4261-z
    A search for new physics is performed using events with two isolated same-sign leptons, two or more jets, and missing transverse momentum. The results are based on a sample of proton-proton collisions at a center-of-mass energy of 13[Formula: see text] recorded with the CMS detector at the LHC, corresponding to an integrated luminosity of 2.3 [Formula: see text]. Multiple search regions are defined by classifying events in terms of missing transverse momentum, the scalar sum of jet transverse momenta, the transverse mass associated with a [Formula: see text] boson candidate, the number of jets, the number of [Formula: see text] quark jets, and the transverse momenta of the leptons in the event. The analysis is sensitive to a wide variety of possible signals beyond the standard model. No excess above the standard model background expectation is observed. Constraints are set on various supersymmetric models, with gluinos and bottom squarks excluded for masses up to 1300 and 680[Formula: see text], respectively, at the 95 % confidence level. Upper limits on the cross sections for the production of two top quark-antiquark pairs (119[Formula: see text]) and two same-sign top quarks (1.7[Formula: see text]) are also obtained. Selection efficiencies and model independent limits are provided to allow further interpretations of the results.
    Matched MeSH terms: Physics
  4. Shear wave elastography in chronic kidney disease - the physics and clinical application
    Ng KH, Wong JHD, Leong SS
    Phys Eng Sci Med, 2024 Mar;47(1):17-29.
    PMID: 38078996 DOI: 10.1007/s13246-023-01358-w
    Chronic kidney disease is a leading public health problem worldwide. The global prevalence of chronic kidney disease is nearly five hundred million people, with almost one million deaths worldwide. Estimated glomerular filtration rate, imaging such as conventional ultrasound, and histopathological findings are necessary as each technique provides specific information which, when taken together, may help to detect and arrest the development of chronic kidney disease, besides managing its adverse outcomes. However, estimated glomerular filtration rate measurements are hampered by substantial error margins while conventional ultrasound involves subjective assessment. Although histopathological assessment is the best tool for evaluating the severity of the renal pathology, it may lead to renal insufficiency and haemorrhage if complications occurred. Ultrasound shear wave elastography, an emerging imaging that quantifies tissue stiffness non-invasively has gained interest recently. This method applies acoustic force pulses to generate shear wave within the tissue that propagate perpendicular to the main ultrasound beam. By measuring the speed of shear wave propagation, the tissue stiffness is estimated. This paper reviews the literature and presents our combined experience and knowledge in renal shear wave elastography research. It discusses and highlights the confounding factors on shear wave elastography, current and future possibilities in ultrasound renal imaging and is not limited to new sophisticated techniques.
    Matched MeSH terms: Physics
  5. Fulltext Understanding Neurobehavioural Dynamics: A Close-Up View on Psychiatry and Quantum Mechanics
    Latif WA, Ggha S
    Malays J Med Sci, 2019 Jan;26(1):147-156.
    PMID: 30914902 DOI: 10.21315/mjms2019.26.1.14
    Psychiatric disorders are prevalent throughout the world and causes heavy burden on mankind. Alone in US, billions of dollars are used for treatment purposes annually. Although advances in treatment strategies had witnessed recently, however the efficacy and overall outcome weren't quite promising. In neurobehavioural sciences, old problems survive through ages and with psychiatric disease, the phenomenon turns intensely complex. While our understanding of brain is mostly based on concepts of particle physics, its functions largely follow the principles of quantum mechanics. The current therapeutics relies on understanding of brain as a material entity that turns to be one of the chief reasons for the unsatisfactory therapeutic outcomes. Collectively, as mankind we are suffering huge loss due to the least effective treatment strategies. Even though we just begin to understand about how brain works, we also do not know much about quantum mechanics and how subatomic particles behave with quantum properties. Though it is apparent that quantum properties like particle and wave function duality coincides with the fundamental aspects of brain and mind duality, thus must share some common basis. Here in this article, an opinion is set that quantum mechanics in association with brain and more specifically psychiatry may take us towards a better understanding about brain, behaviour and how we approach towards treatment.
    Matched MeSH terms: Physics
  6. Medical physics is alive and well and growing in South East Asia
    Ng K, Pirabul R, Peralta A, Soejoko D
    Australas Phys Eng Sci Med, 1997 Mar;20(1):27-32.
    PMID: 9141310
    In recent years there has been a significant economic growth in South East Asia, along with it a concurrent development of medical physics. The status of four countries--Malaysia, Thailand, the Philippines and Indonesia are presented. Medical physicists in these countries have been experiencing the usual problems of lack of recognition, low salaries, and insufficient facilities for education and training opportunities. However the situation has improved recently through the initiative of local enthusiastic medical physicists who have started MS graduate programs in medical physics and begun organizing professional activities to raise the profile of medical physics. The tremendous support and catalytic roles of the American Association of Physicists in Medicine (AAPM) and international organizations such as International Organization for Medical Physics (IOMP), International Atomic Energy Agency (IAEA), World Health Organization (WHO), and International Center for Theoretical Physics (ICTP) have been instrumental in achieving progress. Contributions by these organizations include co-sponsorship of workshops and conferences, travel grants, medical physics libraries programs, and providing experts and educators. The demand for medical physicists is expected to rise in tandem with the increased emphasis on innovative technology for health care, stringent governmental regulation, and acceptance by the medical community of the important role of medical physicists.
    Matched MeSH terms: Biophysics/trends*; Physics/trends*
  7. Medical physicists in Malaysia: A national workforce survey 2019
    Wong JHD, Zin HM, Pawanchek M, Ng KH
    Phys Med, 2019 Nov;67:40-49.
    PMID: 31669669 DOI: 10.1016/j.ejmp.2019.10.019
    OBJECTIVE: Medical physics in Malaysia is still considered a young profession. This workforce survey aims to understand the status, aspirations, motivation and experiences of medical physicists (MPs) in the country. A subsection of this survey also aims to understand the role of women.

    METHOD: A survey was carried out between April 20 and May 30, 2018 by a working group under the Medical Physics Division of the Malaysian Institute of Physics (IFM). The survey form was designed using Google Form and sent to various public and private institutions nationwide that employed MPs registered with IFM.

    RESULTS: A total of 106 responses (28% men and 72% women) were analysed. This represented 30% of the medical physics workforce. Majority of them had postgraduate degrees, but their clinical training is mostly obtained on the job with no certification. The number of low-ranking female MPs was disproportionately high. MPs worked long hours and achieving work-life balance (WLB) was a challenge. Factors that improved their WLB included working close to home, having a supportive manager and flexible working hours. Most MPs aspired to become professional and mentor younger compatriots, besides contributing to patient care and research. Gender discrimination was reportedly low.

    CONCLUSION: Medical physics in Malaysia is growing and has a strong representation of women. In future, they would probably take over the top management from their male counterparts, whose number had stagnated. A united effort was essential to set up a proper clinical training system to train clinically qualified MPs.

    Matched MeSH terms: Physics/statistics & numerical data*
  8. Medical physics aspects of Intensity-Modulated Radiotherapy practice in Malaysia
    Hizam NDA, Ung NM, Jong WL, Zin HM, Rahman ATA, Loh JPY, et al.
    Phys Med, 2019 Nov;67:34-39.
    PMID: 31655398 DOI: 10.1016/j.ejmp.2019.10.023
    PURPOSE: Intensity Modulated Radiotherapy (IMRT) has changed the practice of radiotherapy since its implementation in the 1990s. The purpose of this study is to review current practice of IMRT in Malaysia.

    METHODS: A survey on medical physics aspects of IMRT is conducted on radiotherapy departments across Malaysia to assess the usage, experience and QA in IMRT, which is done for the first time in this country. A set of questionnaires was designed and sent to the physicist in charge for their responses. The questionnaire consisted of four sections; (i) Experience and qualification of medical physicists, (ii) CT simulation techniques (iii) Treatment planning and treatment unit, (iv) IMRT process, delivery and QA procedure.

    RESULTS: A total of 26 responses were collected, representing 26 departments out of 33 radiotherapy departments in operation across Malaysia (79% response rate). Results showed that the medical physics aspects of IMRT practice in Malaysia are homogenous, with some variations in certain areas of practices. Thirteen centres (52%) performed measurement-based QA using 2D array detector and analysed using gamma index criteria of 3%, 3 mm with variation confidence range. In relation to the IMRT delivery, 44% of Malaysia's physicist takes more than 8 h to plan a head and neck case compared to the UK study possibly due to the lack of professional training.

    CONCLUSIONS: This survey provides a picture of medical physics aspects of IMRT in Malaysia where the results/data can be used by radiotherapy departments to benchmark their local policies and practice.

    Matched MeSH terms: Physics*
  9. Fulltext Direct synthesis of nanodiamonds by femtosecond laser irradiation of ethanol
    Nee CH, Yap SL, Tou TY, Chang HC, Yap SS
    Sci Rep, 2016 Sep 23;6:33966.
    PMID: 27659184 DOI: 10.1038/srep33966
    Carbon nanomaterials exhibit novel characteristics including enhanced thermal, electrical, mechanical, and biological properties. Nanodiamonds; first discovered in meteorites are found to be biocompatible, non-toxic and have distinct optical properties. Here we show that nanodiamonds with the size of <5 nm are formed directly from ethanol via 1025 nm femtosecond laser irradiation. The absorption of laser energy by ethanol increased non-linearly above 100 μJ accompanied by a white light continuum arises from fs laser filamentation. At laser energy higher than 300 μJ, emission spectra of C, O and H in the plasma were detected, indicating the dissociation of C2H5OH. Nucleation of the carbon species in the confined plasma within the laser filaments leads to the formation of nanodiamonds. The energy dependence and the roles of the nonlinear phenomenon to the formation of homogeneous nanodiamonds are discussed. This work brings new possibility for bottom-up nanomaterials synthesis based on nano and ultrafast laser physics.
    Matched MeSH terms: Physics
  10. Fulltext Current concepts in cancer research
    Ivan Kok Seng Yap, Ammu Kutty Radhakrishnan, Chee Onn Leong
    International e-Journal of Science, Medicine & Education, 2013;7(11):19-31.
    MyJurnal
    Cancer research is an extremely broad topic covering many scientific disciplines including biology (e.g. biochemistry and signal transduction), chemistry (e.g. drug discover and development), physics (e.g. diagnostic devices) and even computer science (e.g. bioinformatics). Some would argue that
    cancer research will continue in much the same way as it is by adding further layers of complexity to the scientific knowledge that is already complex and almost beyond measure. But we anticipate that cancer research will undergo a dramatic paradigm shift due to the recent explosion of new discoveries in cancer biology. This review article focuses on the latest horizons in cancer research concerning cancer epigenetics, cancer stem cells, cancer immunology and cancer metabolism.
    Matched MeSH terms: Physics
  11. Fulltext Intrastromal corneal foreign body – case series and discussion on the physics of injury
    Andrea, B.K., Safinaz, M.K., Umi Kalthum, M.N., Mushawiahti, M.
    Journal of Surgical Academia, 2018;8(2):23-26.
    MyJurnal
    Traumatic injury to the eye can occur due to various causes, most of which are avoidable. Here we report three cases of intrastromal corneal foreign bodies (FB) which required surgical removal. Most corneal FBs are removed easily at the slit lamp, however, these cases required surgical intervention due to the mechanism of which the FB penetrated into the stroma. Although the mechanism of injury was similar, with all three cases occurring at high velocity, we observed that the entry and level of penetration differed in each case. In the first case, the corneal FB penetrated the cornea and was embedded in the anterior stroma, whereas in the second case, the FB was embedded in the posterior stroma, but with an intact endothelium. In the third case, the FB caused a full thickness, self-sealed laceration wound but remained embedded in the stroma. Through further evaluation, we noted that several factors contribute towards the severity of the injury, namely, anatomy of the cornea, area affected, shape, size, mass and velocity of the object. We speak in depth about the mechanism of injury and physics associated with these injuries and why the penetration differed in each case.
    Matched MeSH terms: Physics
  12. Carbon nanotubes buckypaper radiation studies for medical physics applications
    Alanazi A, Alkhorayef M, Alzimami K, Jurewicz I, Abuhadi N, Dalton A, et al.
    Appl Radiat Isot, 2016 Nov;117:106-110.
    PMID: 26777569 DOI: 10.1016/j.apradiso.2016.01.001
    Graphite ion chambers and semiconductor diode detectors have been used to make measurements in phantoms but these active devices represent a clear disadvantage when considered for in vivo dosimetry. In such circumstance, dosimeters with atomic number similar to human tissue are needed. Carbon nanotubes have properties that potentially meet the demand, requiring low voltage in active devices and an atomic number similar to adipose tissue. In this study, single-wall carbon nanotubes (SWCNTs) buckypaper has been used to measure the beta particle dose deposited from a strontium-90 source, the medium displaying thermoluminescence at potentially useful sensitivity. As an example, the samples show a clear response for a dose of 2Gy. This finding suggests that carbon nanotubes can be used as a passive dosimeter specifically for the high levels of radiation exposures used in radiation therapy. Furthermore, the finding points towards further potential applications such as for space radiation measurements, not least because the medium satisfies a demand for light but strong materials of minimal capacitance.
    Matched MeSH terms: Health Physics/instrumentation; Health Physics/methods
  13. Fulltext A model for online interactive remote education for medical physics using the Internet
    Woo MK, Ng KH
    J Med Internet Res, 2003 Jan-Mar;5(1):e3.
    PMID: 12746208
    Medical physics is a relatively small community but it spans great geographical distances, usually with a scarcity of experts whose expertise could greatly benefit students entering into the field. In addition there are many software systems for which an interactive education method would be most advantageous.
    Matched MeSH terms: Nuclear Physics/education*; Nuclear Physics/methods
  14. Fulltext Conductance modulation of charged lipid bilayer using electrolyte-gated graphene-field effect transistor
    Kiani MJ, Harun FK, Ahmadi MT, Rahmani M, Saeidmanesh M, Zare M
    Nanoscale Res Lett, 2014;9(1):371.
    PMID: 25114659 DOI: 10.1186/1556-276X-9-371
    Graphene is an attention-grabbing material in electronics, physics, chemistry, and even biology because of its unique properties such as high surface-area-to-volume ratio. Also, the ability of graphene-based materials to continuously tune charge carriers from holes to electrons makes them promising for biological applications, especially in lipid bilayer-based sensors. Furthermore, changes in charged lipid membrane properties can be electrically detected by a graphene-based electrolyte-gated graphene field effect transistor (GFET). In this paper, a monolayer graphene-based GFET with a focus on the conductance variation caused by membrane electric charges and thickness is studied. Monolayer graphene conductance as an electrical detection platform is suggested for neutral, negative, and positive electric-charged membrane. The electric charge and thickness of the lipid bilayer (Q LP and L LP) as a function of carrier density are proposed, and the control parameters are defined. Finally, the proposed analytical model is compared with experimental data which indicates good overall agreement.
    Matched MeSH terms: Physics
  15. Fulltext ‘Smartfan’ – An energy saving innovation for workplace
    Nur Jannah Azman, Wan Mohd Rizlan Wan Idris, Alice Shanthi
    Jurnal Inovasi Malaysia, 2019;2(2):111-122.
    MyJurnal
    Circular 10/2016 issued by UiTM Vice-Chancellor’s office comprises a clear guideline for 2017 Strategic Budget Planning. The guidelines can help the Head of PTJ’s to plan and take necessary cost effective measures to reduce on utility expenditure especially to counter the rising monthly electricity bills related to the use of air conditioners on campuses. Looking at the figures drawn from the energy management office in UiTM Negeri Sembilan Branch, UiTM Kuala Pilah campus has spent an average of RM153, 028.88 monthly in 2016. As of August 2016, the cost of electricity consumption in UiTM Kuala Pilah has reached RM1,224,231.03. This amount has surpassed the overall approved allocation of RM 800,000.00 for 2016 electricity bill. In order to reduce spending and encourage saving, as well as responding to the ‘Energy Savings Campaign’ held at the campus level, various efforts have been taken at the departmental levels. One of the innovative products that came about from the campaign is the ‘Smartfan’ project pioneered by the Physics and Materials Science Unit. The main objective of this project is the production of a “smartfan” or a mini air conditioner which is a simple, cost-effective and an energy saving device. In addition, products and ideas from the campaign can be piloted and taken to innovative, inventions and design contests at national and international levels.
    Matched MeSH terms: Physics
  16. Fulltext Physico-chemical properties of spray-dried red pitaya (Hylocereus polyrhizus) peel powder during storage
    Ee, S.C., Bakar, J., Kharidah, M., Dzulkifly, M.H., Noranizan, A.
    International Food Research Journal, 2014;21(3):1213-1218.
    MyJurnal
    The physico-chemical properties of spray-dried pitaya peel powders kept at accelerated (45 ± 2°C) and room temperature (28 ± 2°C) for 14 weeks and 6 months, respectively were evaluated. Changes in physico-chemical properties of the peel powder were used as indicators of stability, while changes of the betacyanin pigment retention was used to calculate the shelf-life of the powder. Storage temperatures significantly (p < 0.05) affected all the studied parameters and Hunter a value had the most significant change. The pigment retention of peel powder was approximately 87% at 45°C and 89% at room temperature storage. Degradation of betacyanin pigment in the powder followed the first order reaction kinetics with the half-life (t1/2) of approximately 76 weeks at 45°C and 38 months at 28°C. The spray-dried pitaya peel powder had a solubility of 87 to 92% and low in powder hygroscopicity. The final Aw of the powder did not exceed 0.6 for both storage temperatures.
    Matched MeSH terms: Physics
  17. The physics interviewing project: a tour of interviews in Asia
    Callen E, Scadron M
    Science, 1978 Jun 2;200(4345):1018-22.
    PMID: 17740674
    The Physics Interviewing Project assists graduate physics departments in evaluating foreign applicants. Supported by some 20 universities, two interviewers, both working scientists, travel abroad and interview students individually for about 1 hour each. Prospective teaching assistants are rated on physics knowledge, problem-solving ability, and English language proficiency. Ratings on all interviewees are sent to all supporting schools and other schools as requested. The Project aids able students from countries that have no physics Ph.D. programs (Indonesia, Malaysia, Thailand) to obtain assistantships and Ph.D.'s abroad, assists in the technological development of those countries, and helps U.S. schools in selecting the most promising foreign candidates. A similar program should be beneficial in other sciences.
    Matched MeSH terms: Physics
  18. Fulltext Study of growth in Bi2Sr2CaCu2Oy single crystals
    Razak Mohd Ali Lee, Khairul Anwar Mohamad, Katsuyoshi, Hamasaki
    Journal of Nuclear and Related Technologies, 2007;2007(1):195-198.
    MyJurnal
    We put attention on Intrinsic Josephson Junction (IJJ) to study the fundamental physic for device applications. Convenient self-flux method was used to grow BSCCO single crystals. We investigated the lid effect to examine the single crystal growth of high TC (Critical Temperature). We found that for the crystal growth with no lid, two stage transitions of TC ≅ 61 K and 77 K were observed. While for the crystal growth with lid, the BSCCO has TC ≅ 80K, ΔTC = 10K and approximately average size5x2mm 2 . When we increased weight of lid, the single crystal have increased to TC =80K, ΔTC = 4K and the typical size was ≅7x3mm 2 . TC and the crystal growth show a tendency to increase by the effect of the lid. From observed quasi-particle characteristics, c-axis direction changed from semiconductor to intrinsic Josephson characteristic with decreasing temperature.
    Matched MeSH terms: Physics
  19. An insight into nanocellulose as soft condensed matter: Challenge and future prospective toward environmental sustainability
    Tan K, Heo S, Foo M, Chew IM, Yoo C
    Sci Total Environ, 2019 Feb 10;650(Pt 1):1309-1326.
    PMID: 30308818 DOI: 10.1016/j.scitotenv.2018.08.402
    Nanocellulose, a structural polysaccharide that has caught tremendous interests nowadays due to its renewability, inherent biocompatibility and biodegradability, abundance in resource, and environmental friendly nature. They are promising green nanomaterials derived from cellulosic biomass that can be disintegrated into cellulose nanofibrils (CNF) or cellulose nanocrystals (CNC), relying on their sensitivity to hydrolysis at the axial spacing of disordered domains. Owing to their unique mesoscopic characteristics at nanoscale, nanocellulose has been widely researched and incorporated as a reinforcement material in composite materials. The world has been consuming the natural resources at a much higher speed than the environment could regenerate. Today, as an uprising candidate in soft condensed matter physics, a growing interest was received owing to its unique self-assembly behaviour and quantum size effect in the formation of three-dimensional nanostructured material, could be utilised to address an increasing concern over global warming and environmental conservation. In spite of an emerging pool of knowledge on the nanocellulose downstream application, that was lacking of cross-disciplinary study of its role as a soft condensed matter for food, water and energy applications toward environmental sustainability. Here we aim to provide an insight for the latest development of cellulose nanotechnology arises from its fascinating physical and chemical characteristic for the interest of different technology holders.
    Matched MeSH terms: Physics
  20. Fulltext Employing of Trukhan Model to Estimate Ion Transport Parameters in PVA Based Solid Polymer Electrolyte
    Aziz SB, B Marif R, Brza MA, Hamsan MH, Kadir MFZ
    Polymers (Basel), 2019 Oct 16;11(10).
    PMID: 31623158 DOI: 10.3390/polym11101694
    In the current paper, ion transport parameters in poly (vinyl alcohol) (PVA) based solid polymer electrolyte were examined using Trukhan model successfully. The desired amount of lithium trifluoromethanesulfonate (LiCF3SO3) was dissolved in PVA host polymer to synthesis of solid polymer electrolytes (SPEs). Ion transport parameters such as mobility (μ), diffusion coefficient (D), and charge carrier number density (n) are investigated in detail using impedance spectroscopy. The data results from impedance plots illustrated a decrement of bulk resistance with an increase in temperature. Using electrical equivalent circuits (EEC), electrical impedance plots (ZivsZr) are fitted at various temperatures. The results of impedance study demonstrated that the resistivity of the sample decreases with increasing temperature. The decrease of resistance or impedance with increasing temperature distinguished from Bode plots. The dielectric constant and dielectric loss values increased with an increase in temperature. The loss tangent peaks shifted to higher frequency region and the intensity increased with an increase in temperature. In this contribution, ion transport as a complicated subject in polymer physics is studied. The conductivity versus reciprocal of temperature was found to obey Arrhenius behavior type. The ion transport mechanism is discussed from the tanδ spectra. The ion transport parameters at ambient temperature are found to be 9 × 10-8 cm2/s, 0.8 × 1017 cm-3, and 3 × 10-6 cm2/Vs for D, n, andμ respectively. All these parameters have shown increasing as temperature increased. The electric modulus parameters are studied in an attempt to understand the relaxation dynamics and to clarify the relaxation process and ion dynamics relationship.
    Matched MeSH terms: Physics
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links