Displaying publications 41 - 60 of 432 in total

Abstract:
Sort:
  1. Teh SS, Ee GC, Mah SH, Yong YK, Lim YM, Rahmani M, et al.
    Biomed Res Int, 2013;2013:517072.
    PMID: 24089682 DOI: 10.1155/2013/517072
    The in vitro cytotoxicity tests on the extracts of Mesua beccariana, M. ferrea, and M. congestiflora against Raji, SNU-1, HeLa, LS-174T, NCI-H23, SK-MEL-28, Hep-G2, IMR-32, and K562 were achieved using MTT assay. The methanol extracts of Mesua beccariana showed its potency towards the proliferation of B-lymphoma cell (Raji). In addition, only the nonpolar to semipolar extracts (hexane to ethyl acetate) of the three Mesua species indicated cytotoxic effects on the tested panel of human cancer cell lines. Antioxidant assays were evaluated using DPPH scavenging radical assay and Folin-Ciocalteu method. The methanol extracts of M. beccariana and M. ferrea showed high antioxidant activities with low EC₅₀ values of 12.70 and 9.77  μg/mL, respectively, which are comparable to that of ascorbic acid (EC₅₀ = 5.62  μg/mL). Antibacterial tests were carried out using four Gram positive and four Gram negative bacteria on Mesua beccariana extracts. All the extracts showed negative results in the inhibition of Gram negative bacteria. Nevertheless, methanol extracts showed some activities against Gram positive bacteria which are Bacillus cereus, methicillin-sensitive Staphylococcus aureus (MSSA), and methicillin-resistant Staphylococcus aureus (MRSA), while the hexane extract also contributed some activities towards Bacillus cereus.
  2. Saki E, Saiful Yazan L, Mohd Ali R, Ahmad Z
    Biomed Res Int, 2017;2017:9517287.
    PMID: 28116312 DOI: 10.1155/2017/9517287
    Chemoprevention has become an important area in cancer research due to low success rate of current therapeutic modalities. Diet plays a vital role in the etiology of cancer. This research was carried out to study the chemopreventive properties of germinated rough rice (GRR) crude extract in Sprague-Dawley rats induced with azoxymethane. Germination of rough rice causes significant changes in several chemical compositions of presently bioactive compounds. These compounds may prevent or postpone the inception of cancer. Fifty male Sprague-Dawley rats (6 weeks of age) were randomly divided into 5 groups which were (G1) induced with azoxymethane (AOM) and not given GRR (positive control), (G2) induced with AOM and given 2000 mg/kg GRR, (G3) induced with AOM and given 1000 mg/kg GRR, (G4) induced with AOM and given 500 mg/kg GRR, and (G5) not induced with AOM and not given GRR crude extract (negative control). To induce colon cancer, rats received two IP injections of AOM in saline (15 mg/kg) for two subsequent weeks. Organs were removed and weighed. Aberrant crypt foci (ACF) were evaluated histopathologically. β-Catenin expressions were determined by Western blot. Treatment with 2000 mg/kg GRR crude extract not only resulted in the greatest reduction in the size and number of ACF but also displayed the highest percentage of nondysplastic ACF. Treatment with 2000 mg/kg GRR also gave the lowest level of expression in β-catenin. Thus, GRR could be a promising dietary supplement for prevention of CRC.
  3. Gopalai AA, Lim SY, Chua JY, Tey S, Lim TT, Mohamed Ibrahim N, et al.
    Biomed Res Int, 2014;2014:867321.
    PMID: 25243190 DOI: 10.1155/2014/867321
    The LRRK2 gene has been associated with both familial and sporadic forms of Parkinson's disease (PD). The G2019S variant is commonly found in North African Arab and Caucasian PD patients, but this locus is monomorphic in Asians. The G2385R and R1628P variants are associated with a higher risk of developing PD in certain Asian populations but have not been studied in the Malaysian population. Therefore, we screened the G2385R and R1628P variants in 1,202 Malaysian subjects consisting of 695 cases and 507 controls. The G2385R and R1628P variants were associated with a 2.2-fold (P = 0.019) and 1.2-fold (P = 0.054) increased risk of PD, respectively. Our data concur with other reported findings in Chinese, Taiwanese, Singaporean, and Korean studies.
  4. Moradipoor S, Ismail P, Etemad A, Wan Sulaiman WA, Ahmadloo S
    Biomed Res Int, 2016;2016:1845638.
    PMID: 27781209 DOI: 10.1155/2016/1845638
    Endothelial dysfunction appears to be an early sign indicating vascular damage and predicts the progression of atherosclerosis and cardiovascular disorders. Extensive clinical and experimental evidence suggests that endothelial dysfunction occurs in Type 2 Diabetes Mellitus (T2DM) and prediabetes patients. This study was carried out with an aim to appraise the expression levels in the peripheral blood of 84 genes related to endothelial cells biology in patients with diagnosed T2DM or prediabetes, trying to identify new genes whose expression might be changed under these pathological conditions. The study covered a total of 45 participants. The participants were divided into three groups: group 1, patients with T2DM; group 2, patients with prediabetes; group 3, control group. The gene expression analysis was performed using the Endothelial Cell Biology RT(2) Profiler PCR Array. In the case of T2DM, 59 genes were found to be upregulated, and four genes were observed to be downregulated. In prediabetes patients, increased expression was observed for 49 genes, with two downregulated genes observed. Our results indicate that diabetic and prediabetic conditions change the expression levels of genes related to endothelial cells biology and, consequently, may increase the risk for occurrence of endothelial dysfunction.
  5. Moin M, Saadat S, Rafique S, Maqsood A, Lal A, Vohra F, et al.
    Biomed Res Int, 2021;2021:5185613.
    PMID: 34950734 DOI: 10.1155/2021/5185613
    Introduction: Oral health is considered as one of the essential components of the overall health of every individual. Maintaining oral health is a gradual process that requires commitment. Children who require special care such as hearing impairment experience difficulty in maintaining oral health primarily due to communication difficulties. This study is aimed at using different interventions to evaluate the improvement of oral hygiene in hearing impaired children.

    Materials and Methods: Fifty-nine children were recruited in this study that were allocated randomly into each group with twenty children as follows: group 1: pictorial, group 2: video, and group 3: control. Mean plaque and gingival scores were noted before and after the use of different interventions. Oral hygiene was categorized as "excellent," "good," and "fair." Gingival health was categorized as "healthy," "mild gingivitis," and "moderate gingivitis."

    Results: Thirty-four children (57.6%) were from 12-13 years of age bracket, and 25 (42.4%) belonged to 14-16 years of age. Regarding gender, there were 37 (62.7%) males and 22 (37.3%) females. About comparison of mean gingival and plaque scores before and after interventions in each group, a significant difference was found in group 1 (p < 0.001) and group 2 (p < 0.001), as compared to group 3 where the difference in scores was not significant (p > 0.05).

    Conclusion: Maintaining oral health requires the compliance of individuals to perform different methods of preventive dentistry, such as tooth brushing and use of dental floss. The use of different oral hygiene educational interventions such as pictorial and video methods have been proven and useful for hearing impaired children in improving oral health.

  6. Taghizadeh Davoudi E, Ibrahim Noordin M, Kadivar A, Kamalidehghan B, Farjam AS, Akbari Javar H
    Biomed Res Int, 2013;2013:495319.
    PMID: 24288681 DOI: 10.1155/2013/495319
    Gastrointestinal disturbances, such as nausea and vomiting, are considered amongst the main adverse effects associated with oral anticancer drugs due to their fast release in the gastrointestinal tract (GIT). Sustained release formulations with proper release profiles can overcome some side effects of conventional formulations. The current study was designed to prepare sustained release tablets of Capecitabine, which is approved by the Food and Drug Administration (FDA) for the treatment of advanced breast cancer, using hydroxypropyl methylcellulose (HPMC), carbomer934P, sodium alginate, and sodium bicarbonate. Tablets were prepared using the wet granulation method and characterized such that floating lag time, total floating time, hardness, friability, drug content, weight uniformity, and in vitro drug release were investigated. The sustained release tablets showed good hardness and passed the friability test. The tablets' floating lag time was determined to be 30-200 seconds, and it floated more than 24 hours and released the drug for 24 hours. Then, the stability test was done and compared with the initial samples. In conclusion, by adjusting the right ratios of the excipients including release-retarding gel-forming polymers like HPMC K4M, Na alginate, carbomer934P, and sodium bicarbonate, sustained release Capecitabine floating tablet was formulated.
  7. Wahabi HA, Siddiqui AR, Mohamed AG, Al-Hazmi AM, Zakaria N, Al-Ansary LA
    Biomed Res Int, 2015;2015:576953.
    PMID: 26779537 DOI: 10.1155/2015/576953
    Translation of research evidence into public health programs is lagging in Eastern Mediterranean Region. Graduate level public health curriculum at King Saud University (KSU), College of Medicine, Riyadh, is designed to equip students to integrate best available evidence in public health decision making. The objectives of study were to explore students' opinion about the evidence based public health (EBPH) courses and to survey the knowledge, opinion, and attitude of the students towards EBPH and perceived barriers for implementation of EBPH in decision making in public health. EBPH courses are designed based on a sequential framework. A survey was conducted at the completion of EBPH courses. Forty-five graduate students were invited to complete a validated self-administered questionnaire. It included questions about demography, opinion, and attitude towards EBPH and perceived barriers towards implementation of EBPH in the work environment. The response rate was 73%. Mean age of students was 30.1 (SD 2.3) years, and 51% were males. More than 80% had sound knowledge and could appreciate the importance of EBPH. The main perceived barriers to incorporate EBPH in decision making were lack of system of communication between researchers and policy makers and scarcity of research publications related to the public health problems.
  8. Ganasegeran K, Menke JM, Challakere Ramaswamy VM, Abdul Manaf R, Alabsi AM, Al-Dubai SA
    Biomed Res Int, 2014;2014:370273.
    PMID: 24701573 DOI: 10.1155/2014/370273
    BACKGROUND: Symptomatic knee osteoarthritis, an ancient malady greatly impairing modern population quality of life, has stimulated global attention to find effective modes of prevention and intervention.

    PURPOSE: This study aimed to assess factors affecting knowledge of symptomatic knee osteoarthritis (knee OA) among Malaysian railway workers.

    METHODS: A cross-sectional study was conducted among 513 railway workers involving eight major states within Peninsular Malaysia using population-based sampling. The assessment instrument was a face-validated, prepiloted, self-administered instrument with sociodemographics and knowledge items on knee OA.

    RESULTS: Mean (± SD) age of the respondents was 41.4 (± 10.7), with the majority aged 50 years or older (34.9%). Of the total respondents, 53.6% had low levels of knowledge of knee OA disease. Multivariate analysis found that four demographic predictors, age ≥ 50 years, family history of knee OA, self-awareness, and clinical diagnosis of the disease entity, were significantly associated with knowledge scores.

    CONCLUSION: The finding of a low level knee OA knowledge among Malaysian railway workers points to an urgent need for massive information to be disseminated among the workers at risk to foster primary prevention and self-care.

  9. Al Balawi AN, Yusof NA, Kamaruzaman S, Mohammad F, Wasoh H, Al Abbosh KF, et al.
    Biomed Res Int, 2019;2019:7064073.
    PMID: 30868072 DOI: 10.1155/2019/7064073
    The present study has synthesized poly(4,4'-cyclohexylidene bisphenol oxalate) by the condensation of oxalyl chloride with 4,4'-cyclohexylidene bisphenol, where its efficacy was tested for the solid-phase extraction of DNA. The synthesized polymer in the form of a white powder was characterized by FTIR, TGA-DTG, SEM, and BET analysis. The study utilized solid-phase application of the resulting polymer to extract DNA. The analysis of results provided the information that the extraction efficiency is a strong dependent of polymer amount and binding buffer type. Among the three types of buffers tested, the GuHCl buffer produced the most satisfactory results in terms of yield and efficiency of extraction. Moreover, the absorbance ratio of A260/A280 in all of the samples varied from 1.682 to 1.491, thereby confirming the capability of poly(4,4'-cyclohexylidene bisphenol oxalate) to elute pure DNA. The results demonstrated an increased DNA binding capacity with respect to increased percentage of the polymer. The study has concluded that poly(bisphenol Z oxalate) can be applied as one of the potential candidates for the high efficiency extraction of DNA by means of a simple, cost-effective, and environmentally friendly approach compared to the other traditional solid-phase methods.
  10. Al Batran R, Al-Bayaty FH, Al-Obaidi MM
    Biomed Res Int, 2013;2013:276329.
    PMID: 24151590 DOI: 10.1155/2013/276329
    Alveolar bone resorption is one of the most important facts in denture construction. Porphyromonas gingivalis (Pg) causes alveolar bone resorption, and morphologic measurements are the most frequent methods to identify bone resorption in periodontal studies. This study has aimed at evaluating the effect of Andrographolide (AND) on alveolar bone resorption in rats induced by Pg. 24 healthy male Sprague Dawley rats were divided into four groups as follows: normal control group and three experimental groups challenged orally with Pg ATCC 33277 five times a week supplemented with 20 mg/kg and 10 mg/kg of AND for twelve weeks. Alveolar bones of the left and right sides of the mandible were assessed by a morphometric method. The bone level, that is, the distance from the alveolar bone crest to cementumenamel junction (CEJ), was measured using 6.1 : 1 zoom stereomicroscope and software. AND reduced the effect of Pg on alveolar bone resorption and decreased the serum levels of Hexanoyl-Lysine (HEL); furthermore the reduced glutathione/oxidised glutathione (GSH/GSSG) ratio in AND treated groups (10 and 20 mg/kg) significantly increased when compared with the Pg group (P < 0.05). We can conclude that AND suppresses alveolar bone resorption caused by Pg in rats.
  11. Irawan BA, Irawan SN, Masudi SM, Sukminingrum N, Alam MK
    Biomed Res Int, 2015;2015:327289.
    PMID: 26558267 DOI: 10.1155/2015/327289
    This study aims to evaluate the effects of vital tooth bleaching with carbamide peroxide home bleaching and in-office bleaching on the color stability and 3D surface profile of dental restorative filling materials. Thirty discs (n = 30) measure 6 mm in diameter and 2 mm thick for each of three restorative materials. These are nanofilled composite Filtek Z350 XT, the submicron composite Estelite Σ Quick, and nanofilled glass ionomer Ketac N100 nanoionomer and were fabricated in shade A2. Each group was further divided into three subgroups (n = 10): subgroup A (Opalescence PF), subgroup B (Opalescence Boost in-office bleaching), and subgroup C (distilled water) serving as control. Samples were bleached according to the manufacturer's instructions for a period of two weeks. The Commission Internationale de L'Eclairage (CIE L(*), a(*), b(*)) system was chosen for image processing, while 3D surface profile was tested with atomic force microscopy (AFM). Statistical analyses were performed with the Mann-Whitney tests and Krusal-Wallis with a P value of ≤ 0.05. The three restorative materials showed significant color changes (ΔE); P ≤ 0.05. In diminishing order, the mean color changes recorded were Estelite Σ (3.82 ± 1.6) > Ketac Nano (2.97 ± 1.2) > Filtek Z350 XT (2.25 ± 1.0). However, none of the tested materials showed statistically significant changes in surface roughness; P > 0.05.
  12. Ahmed N, Halim MSB, Ghani ZA, Khan ZA, Abbasi MS, Jamayet NB, et al.
    Biomed Res Int, 2021;2021:6674400.
    PMID: 33969123 DOI: 10.1155/2021/6674400
    The objective of this paper was to evaluate the existence of golden percentage in natural maxillary anterior teeth with the aid of 3D digital dental models and 2D photographs. And to propose regional values of golden percentage for restoration of maxillary anterior teeth. For this purpose, one hundred and ninety dentate subjects with sound maxillary anterior teeth were selected. Standardized frontal images were captured with DSLR, and the apparent width of maxillary anterior teeth was measured utilizing a software on a personal laptop computer. Once the dimensions were recorded, the calculations were made according to the golden percentage theory (GPT). The data were analyzed by independent and paired T-test. The level of significance was set at p < 0.05. The golden percentage values were not found in this study. The values obtained were 16%, 15%, 20%, 20%, 15%, and 16% moving from the right canine to the left canine teeth. There was no significant gender difference in the golden percentage values. Thus, golden percentage should not be used solely for the correction of anterior teeth or for determining dental attractiveness. Emphasis should be given to a range of dental proportion on regional basis.
  13. Ahmed T, Rahman NA, Alam MK
    Biomed Res Int, 2021;2021:6663683.
    PMID: 33959664 DOI: 10.1155/2021/6663683
    Objective: To compare the orthodontic bracket debonding force and assess the bracket failure pattern clinically between different teeth by a validated prototype debonding device. Materials and Method. Thirteen (13) patients at the end of comprehensive fixed orthodontic treatment, awaiting for bracket removal, were selected from the list. A total of 260 brackets from the central incisor to the second premolar in both jaws were debonded by a single clinician using a validated prototype debonding device equipped with a force sensitive resistor (FSR). Mean bracket debonding forces were specified to ten (10) groups of teeth. Following debonding, Intraoral microphotographs of the teeth were taken by the same clinician to assess the bracket failure pattern using a 4-point scale of adhesive remnant index (ARI). Statistical analysis included one-way ANOVA with post hoc Tukey HSD and independent sample t-test to compare in vivo bracket debonding force, Cohen's kappa (κ), and a nonparametric Kruskal-Wallis test for the reliability and the assessment of ARI scoring.

    Results: A significant difference (p < 0.001) of mean debonding force was found between different types of teeth in vivo. Clinically, ARI scores were not significantly different (p = 0.921) between different groups, but overall higher scores were predominant.

    Conclusion: Bracket debonding force should be measured on the same tooth from the same arch as the significant difference of mean debonding force exists between similar teeth of the upper and lower arches. The insignificant bracket failure pattern with higher ARI scores confirms less enamel damage irrespective of tooth types.

  14. Alshammary F, Karobari MI, Assiry AA, Marya A, Shaikh GM, Siddiqui AA, et al.
    Biomed Res Int, 2021;2021:5523242.
    PMID: 34036099 DOI: 10.1155/2021/5523242
    This study is aimed at assessing the influence of Nd:YAG, Er,Cr:YSGG laser irradiation, and adjunctive photodynamic therapy (aPDT) on the bond strength of zirconia posts to radicular dentin. Eighty extracted anterior teeth were randomly categorized into 4 groups (n = 20) based on varying laser irradiation treatments, i.e., conventional cleaning and shaping (CCS), Nd:YAG, Er,Cr:YSGG, and aPDT group, respectively. Using a cutting machine, the samples were prepared for push-out bond strength analysis; 4 sections (2 on each apical and cervical) of around 1 mm thickness were sectioned for all roots at a right angle to the long axis of the post. After making the space for the post, they were incorporated into the root system and were subjected to different laser treatments. The universal testing machine was utilized to assess the push-out bond strength, which had a defined 1 mm/minute crosshead speed until the failure was encountered. Specimens in the aPDT group (8.20 ± 2.14 MPa) demonstrated the highest mean push-out bond strength, whereas the lowest was shown by samples in the CCS group (7.08 ± 1.11 MPa). According to the independent t-test, the mean push-out bond strength scores of the cervical segments were higher as compared to the apical segments in research groups (p < 0.05). Overall, the adhesive type was the most frequently encountered failure mode in all of the experimental groups, with the least number of failures observed in aPDT treated teeth samples. In conclusion, the push-out bond strength to radicular dentin was not much influenced by Nd:YAG, Er,Cr:YSGG laser, and aPDT in comparison with CCS. Although statistically not significant, however, the application of aPDT provided better outcomes as compared to other research groups.
  15. Abbasi H, Saqib M, Jouhar R, Lal A, Ahmed N, Ahmed MA, et al.
    Biomed Res Int, 2021;2021:1119710.
    PMID: 34124238 DOI: 10.1155/2021/1119710
    Introduction: Dental anxiety is a common occurrence in patients undergoing dental treatments, especially in children. The success in paedriatric dental treatments and patient comfort depends on controlling the level of patient's anxiety in clinical settings. This study is aimed at evaluating the efficacy of different techniques applied for the reduction of dental anxiety in paediatric patients. Material and Methods. One hundred and sixty participants were divided into 4 groups; each group having 40 patients as follows: group I: mobile application "little lovely dentist," group II: YouTube® "dental video songs," group III "tell-show-do," and group IV "control." Dental prophylaxis treatments were provided to all the participants. Initial anxiety levels were noted during the patient's education phase by measuring heart rate with pulse oximeter and distress level with facial image scale, at the same time in each group, respectively. The postoperative anxiety was noted later with the same methods, after the application of anxiety reduction techniques. The data obtained were entered in the statistical package for the social sciences software, version 25. One-way ANOVA and paired t-test for matched groups were used to compare mean values of the 4 groups, in this study to determine their effectiveness. A p value of ≤0.05 was considered as statistically significant.

    Results: The mean age of patients in group 1 was 6.8 ± 2.1 years, group 2: 8.15 ± 2.27 years, group 3: 7.5 ± 2.3 years, and group 4: 7.27 ± 1.68 years. The intragroup comparisons of heart rate and facial image scores have shown a significant difference in before and after dental treatment procedures. Marked reduction in heart rate and facial image scale scores were found in patients belonging to group 1 (mobile applications) and group 2 (dental video songs). An increase in heart rate and facial image scale scores was seen in group 3 (tell-show-do) and the control group.

    Conclusion: The paediatric dental anxiety is a common finding in dental clinics. Behavior modification techniques like smartphone applications, "little lovely dentist," and "dental songs" can alleviate dental anxiety experienced by paediatric patients. The "tell-show-do" technique although most commonly used did not prove to be beneficial in the reduction of the anxiety levels.

  16. Ahmed N, Abbasi MS, Haider S, Ahmed N, Habib SR, Altamash S, et al.
    Biomed Res Int, 2021;2021:3194433.
    PMID: 34532499 DOI: 10.1155/2021/3194433
    Objective: Analyzing and comparing the fit and accuracy of removable partial denture (RPDs) frameworks fabricated with CAD/CAM and rapid prototyping methods with conventional techniques.

    Materials and Methods: The present systematic review was carried out according to PRISMA guidelines. The search was carried out on PubMed/MEDLINE, Cochrane collaboration, Science direct, and Scopus scientific engines using selected MeSH keywords. The articles fulfilling the predefined selection criteria based on the fit and accuracy of removable partial denture (RPD) frameworks constructed from digital workflow (CAD/CAM; rapid prototyping) and conventional techniques were included.

    Results: Nine full-text articles comprising 6 in vitro and 3 in vivo studies were included in this review. The digital RPDs were fabricated in all articles by CAD/CAM selective laser sintering and selective laser melting techniques. The articles that have used CAD/CAM and rapid prototyping technique demonstrated better fit and accuracy as compared to the RPDs fabricated through conventional techniques. The least gaps between the framework and cast (41.677 ± 15.546 μm) were found in RPDs constructed through digital CAD/CAM systems.

    Conclusion: A better accuracy was achieved using CAD/CAM and rapid prototyping techniques. The RPD frameworks fabricated by CAD/CAM and rapid prototyping techniques had clinically acceptable fit, superior precision, and better accuracy than conventionally fabricated RPD frameworks.

  17. Ahmed N, Abbasi MS, Zuberi F, Qamar W, Halim MSB, Maqsood A, et al.
    Biomed Res Int, 2021;2021:9751564.
    PMID: 34258283 DOI: 10.1155/2021/9751564
    Objective: The objective of this systematic review was to investigate the quality and outcome of studies into artificial intelligence techniques, analysis, and effect in dentistry.

    Materials and Methods: Using the MeSH keywords: artificial intelligence (AI), dentistry, AI in dentistry, neural networks and dentistry, machine learning, AI dental imaging, and AI treatment recommendations and dentistry. Two investigators performed an electronic search in 5 databases: PubMed/MEDLINE (National Library of Medicine), Scopus (Elsevier), ScienceDirect databases (Elsevier), Web of Science (Clarivate Analytics), and the Cochrane Collaboration (Wiley). The English language articles reporting on AI in different dental specialties were screened for eligibility. Thirty-two full-text articles were selected and systematically analyzed according to a predefined inclusion criterion. These articles were analyzed as per a specific research question, and the relevant data based on article general characteristics, study and control groups, assessment methods, outcomes, and quality assessment were extracted.

    Results: The initial search identified 175 articles related to AI in dentistry based on the title and abstracts. The full text of 38 articles was assessed for eligibility to exclude studies not fulfilling the inclusion criteria. Six articles not related to AI in dentistry were excluded. Thirty-two articles were included in the systematic review. It was revealed that AI provides accurate patient management, dental diagnosis, prediction, and decision making. Artificial intelligence appeared as a reliable modality to enhance future implications in the various fields of dentistry, i.e., diagnostic dentistry, patient management, head and neck cancer, restorative dentistry, prosthetic dental sciences, orthodontics, radiology, and periodontics.

    Conclusion: The included studies describe that AI is a reliable tool to make dental care smooth, better, time-saving, and economical for practitioners. AI benefits them in fulfilling patient demand and expectations. The dentists can use AI to ensure quality treatment, better oral health care outcome, and achieve precision. AI can help to predict failures in clinical scenarios and depict reliable solutions. However, AI is increasing the scope of state-of-the-art models in dentistry but is still under development. Further studies are required to assess the clinical performance of AI techniques in dentistry.

  18. Ahmad WMAW, Yaqoob MA, Noor NFM, Ghazali FMM, Rahman NA, Tang L, et al.
    Biomed Res Int, 2021;2021:5436894.
    PMID: 34904115 DOI: 10.1155/2021/5436894
    Background: Cancer is primarily caused by smoking, alcohol, betel quit, a series of genetic alterations, and epigenetic abnormalities in signaling pathways, which result in a variety of phenotypes that favor the development of OSCC. Oral squamous cell carcinoma (OSCC) is the most common type of oral cancer, accounting for 80-90% of all oral malignant neoplasms. Oral cancer is relatively common, and it is frequently curable when detected and treated early enough. The tumor-node-metastasis (TNM) staging system is used to determine patient prognosis; however, geographical inaccuracies frequently occur, affecting management.

    Objective: To determine the additional relationship between factors discovered by searching for sociodemographic and metastasis factors, as well as treatment outcomes, which could help improve the prediction of the survival rate in cancer patients. Material and Methods. A total of 56 patients were recruited from the ambulatory clinic at the Hospital Universiti Sains Malaysia (USM). In this retrospective study, advanced computational statistical modeling techniques were used to evaluate data descriptions of several variables such as treatment, age, and distant metastasis. The R-Studio software and syntax were used to implement and test the hazard ratio. The statistics for each sample were calculated using a combination model that included methods such as bootstrap and multiple linear regression (MLR).

    Results: The statistical strategy showed R demonstrates that regression modeling outperforms an R-squared. It demonstrated that when data is partitioned into a training and testing dataset, the hybrid model technique performs better at predicting the outcome. The variable validation was determined using the well-established bootstrap-integrated MLR technique. In this case, three variables are considered: age, treatment, and distant metastases. It is important to note that three things affect the hazard ratio: age (β 1: -0.006423; p < 2e - 16), treatment (β 2: -0.355389; p < 2e - 16), and distant metastasis (β 3: -0.355389; p < 2e - 16). There is a 0.003469102 MSE for the linear model in this scenario.

    Conclusion: In this study, a hybrid approach combining bootstrapping and multiple linear regression will be developed and extensively tested. The R syntax for this methodology was designed to ensure that the researcher completely understood the illustration. In this case, a hybrid model demonstrates how this critical conclusion enables us to better understand the utility and relative contribution of the hybrid method to the outcome. The statistical technique used in this study, R, demonstrates that regression modeling outperforms R-squared values of 0.9014 and 0.00882 for the predicted mean squared error, respectively. The conclusion of the study establishes the superiority of the hybrid model technique used in the study.

  19. Hameed HA, Hasan HA, Luddin N, Husein A, Ariffin A, Alam MK
    Biomed Res Int, 2022;2022:3675703.
    PMID: 35496039 DOI: 10.1155/2022/3675703
    AIM: To investigate and compare the cell cytotoxicity, proliferation, cell attachment, and morphology of human fetal osteoblasts (hFOB) cells of coated samples (titanium nanocopper (Ti Cu), titanium nanohydroxyapatite (Ti HA) and titanium nanocopper ion doped hydroxyapatite (Ti Cu/HA) and uncoated samples (Ti) in order to assess the suitability of these surface modifications on Ti-6Al-7Nb for dental implant application.

    MATERIALS AND METHODS: The cytotoxicity was studied by examining the hFOB cell response by MTT assessment. The cell morphology was evaluated by inverted microscopy and observed under scanning electronic microscopy (SEM).

    RESULTS: MTT assay results displayed that the Cu content on the surface of Ti-6Al-7Nb alloys did not produce any cytotoxic effect on cell viability. The cell viability rate in all samples ranges from 97% to 126%, indicating that hFOB cells grew at a high proliferation rate. However, no significant differences in cell viability were observed between Ti and Ti Cu and between Ti HA and Ti Cu/HA groups. Microscopic examination demonstrated no difference in the cell morphology of hFOB among all samples. In addition, SEM observation indicated favorable adhesion and spreading of the cells on the coated and uncoated samples.

    CONCLUSIONS: The surface modification of Ti-6Al-7Nb alloy with Cu, HA, and Cu/HA exhibits good cell biocompatibility, and the Cu has no influence on the cell proliferation and differentiation of hFOB.

Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links