Displaying publications 41 - 60 of 677 in total

Abstract:
Sort:
  1. Noor Ashikin Mohd Rashid, Wan Nor Liza Wan Mahadi
    Sains Malaysiana, 2014;43:909-914.
    Evaluation of magnetic properties of electrical steel is vital in improving the quality of electrical machinery since it is used as magnetic cores for transformers, motors and generators. A double yoke single sheet tester (ssT) was modeled using two identical C-cores wound with copper wires at limb side in horizontal arrangement. The magnetic properties for electrical steels, grade M4 and M19 were tested under a frequency of 50 Hz with the current ranging from 02 to 2.4A. The effects of the sample dimension and anisotropy on magnetic measurements were investigated. Evaluation on specimen dimensions indicate that the non-uniformity of sample magnetization in overhang sample can attribute to the flux leakage between the yoke legs. The stray flux is also increased with the overhang sample. However, the so-called fit-in sample which is fitted nicely between the yoke end poles can minimize the effect of stray flux. One way ANOVA and T-test were used as statistical methods and executed at the 5% significance level. It is statistically proven that the magnetic properties of both magnetic materials are influenced by their anisotropy.
    Matched MeSH terms: Analysis of Variance
  2. Noraidah Sahari @ Ashaari, Hairulliza Mohd Judi, Abdul Azim Abdul Ghani, Mohd Hasan Selamat, Aida Suraya Md Yunus
    Tujuan utama kajian ini adalah untuk menghasilkan bukti kesahan dan kebolehpercayaan metrik pengukuran kebergunaan perisian kursus matematik secara psikometrik dan seterusnya membentuk rumus skor kebergunaan. Kertas ini membincangkan pembentukan rumus kebergunaan. Berdasarkan pandangan secara teori, satu model hipotesis kebergunaan dengan tiga faktor iaitu kebolehgunaan, kefungsian dan kecekapan dan 85 metrik dicadangkan. Melalui pengesahan pakar dan ujian kebolehpercayaan metrik kebergunaan dikurangkan kepada 64. Instrumen dengan 64 metrik ditadbir ke atas 620 guru matematik di lima zon di Malaysia. Mereka diminta melayari perisian kursus matematik (PKM) sambil melengkapkan instrumen. Analisis faktor penjelajahan dilakukan untuk mengesahkan konstruk kebergunaan manakala analisis faktor pengesahan dijalankan untuk membentuk model berstruktur dengan memadankan 34 metrik dengan model hipotesis. Ujian-t dan ujian ANOVA mendapati tiga pembolehubah iaitu, bidang pengkhususan guru, pengalaman menggunakan komputer dan ralat penilaian menyumbang kepada skor kebergunaan. Dapatan ini digunakan untuk membentuk rumus kebergunaan PKM.
    Matched MeSH terms: Analysis of Variance
  3. Arbain Mokhtar, Azniza Abdul Ghani, Rozainah MZ
    Penanaman semula hutan paya bakau dipertimbangkan sebagai satu usaha terbaik bagi melindungi dan memelihara kawasan pesisir pantai. Dalam kajian ini sejumlah 180 anak benih Bruguiera cylindrica telah ditanam di kawasan pesisir pantai Pulau Carey. Dua set eksperimen daripada segi corak dan medium dilakukan dengan 3 plot replika bagi setiap rawatan dengan kaedah Blok Rawak Lengkap. Kadar keterushidupan anak bakau B. cylindrica dicatat setiap 2 minggu selama 20 minggu. Keputusan menunjukkan corak penanaman secara kelompok adalah lebih sesuai (20%). Anak bakau yang ditanam secara langsung di atas tanah menunjukkan kadar hidup yang lebih tinggi (30%). Namun ujian analisis ANOVA menunjukkan tiada perbezaan yang signifikan antara ketiga-tiga corak taburan penanaman dan penggunaan medium yang berbeza ini terhadap keterushidupan anak bakau B. cylindrica.
    Matched MeSH terms: Analysis of Variance
  4. Nur 'Aqilah M, Nizam M, Latiff A
    Sains Malaysiana, 2013;42:1523-1528.
    Data bagi Sapindaceae dalam suatu plot kekal 50 ha di Hutan Simpan Pasoh, Negeri Sembilan, Malaysia telah diperoleh dari Institut Penyelidikan Hutan Malaysia (FRIM), Kepong dan telah diguna untuk menilai pengeluaran primer dan taburan famili. Lima bancian telah dijalankan dalam tahun 1985-2005 dan analisis data telah dijalankan ke atas bancian terakhir. Walau bagaimanapun perbandingan telah dibuat antara kelima-lima bancian untuk menentukan kevariabelan. Daripada bancian tahun 2005, 10 genus dan 18 spesies Sapindaceae telah direkodkan di dalam plot. Sejumlah 13360 dirian pokok telah dikira dan spesies yang paling banyak ialah Xerospermum noronhianum (7678 dirian). Jumlah biojisim bagi famili telah dianggarkan sebanyak 7.25 t/ha dan biojisim atas tanah tertinggi telah disumbangkan oleh X. noronhianum, dengan anggaran sebanyak 2.78 t/ha. Spesies ini juga mempunyai nilai keluasan pangkal tertinggi dengan 17.68 m2/ha. Anggaran biojisim untuk 20 tahun telah berkurangan secara signifikan (ANOVA, p<0.05) antara empat bancian. Genus yang mempunyai dirian tertinggi ialah Xerospermum (57.47%). Bagi melihat corak taburan, Indeks Taburan Morisita (Id) telah digunakan dan mendapati semua spesies mempunyai corak taburan secara rawak. Sebanyak 2292 dirian telah didapati mati (278/tahun) dan 1246 dirian baru direkodkan (172/tahun) pada tahun 2005. Secara keseluruhannya pertambahan saiz diameter bagi tempoh 20 tahun adalah sangat kecil iaitu 0.03 cm/tahun.
    Matched MeSH terms: Analysis of Variance
  5. Wong Y, Taufiq-Yap YH, Ramli I
    Sains Malaysiana, 2015;44:281-290.
    Biodiesel was produced via transesterification of palm oil with methanol in the presence of CaO-Nb2O5 mixed oxide catalyst. Response surface methodology (RSM) with central composite design (CCD) was performed to determine the optimum operating conditions and to optimize the biodiesel yield. In this study, the reaction variables being optimized were reaction time, catalyst loading and methanol to oil molar ratio. From the analysis of variance (ANOVA), the most influential parameter on biodiesel production was reaction time. The predicted yield was found in good agreement with the experimental value, with R2= 0.9902. The optimum biodiesel yield of 97.67% was achieved at 2.67 h reaction time, with 3.60 wt. % of catalyst and with methanol to oil molar ratio of 13.04. The high biodiesel yield can be correlated to the synergic effect of basicity between the metallic ions of CaO-Nb2O5 shown in the physicochemical analysis.
    Matched MeSH terms: Analysis of Variance
  6. Ola-Fadunsin SD, Gimba FI, Abdullah DA, Jesse Abdullah FF, Sani RA
    Data Brief, 2020 Apr;29:105315.
    PMID: 32140522 DOI: 10.1016/j.dib.2020.105315
    This dataset investigated the diversity, the geographic and spatial distribution of haematophagous flies collected from cattle farms in Peninsular Malaysia. Biting flies were trapped from 25 cattle farms over a one-year period. One-way Analysis of Variance (ANOVA) was used to establish the presence/absence of statistical differences in the number of flies caught in relation to the different geographic distributions (zones). Three thousand eight hundred and eighty-nine haematophagous flies comprising of 36 different species, including Musca species (3189; 82.0%), Stomoxys species (588; 15.1%), Tabanus species (58; 1.5%), Chrysops species (19; 0.5%), Haematopota javana (3; 0.1%), Haematobosca species (29; 0.7%) and Haematobia exigua (3; 0.1%) were collected using three different types of fly traps. More biting flies were trapped in the southwest (1070; 27.5%) and south (1045; 26.9%) zones compared to other arbitrary zones of Peninsular Malaysia. Haematophagous flies were spatially distributed both in the inland and coastal parts of the country. The difference in the catch of Stomoxys species within zones was not significant (F = 1.299; df = 5; p = 0.306), although it was highest in the southwest zone. The number of Musca species caught was highest in the south zone compared to other zones, the differences was not significant (F = 0.770; df = 5; p = 0.583). Tabanidae fly species were most abundant in the southwest zone, the differences among zones was not significant (F = 1.179; df = 5; p = 0.356).
    Matched MeSH terms: Analysis of Variance
  7. Soundhar A, Zubar HA, Sultan MTBHH, Kandasamy J
    Data Brief, 2019 Apr;23:103671.
    PMID: 30788395 DOI: 10.1016/j.dib.2019.01.019
    Newly prepared titanium alloy (Ti-13Zr-13Nb (TZN)) using powder metallurgy is considered in this investigation. Titanium alloys (TZN) are used in hip and knee replacement for orthopedic implants. Conventional machining, TZN alloys produce higher tool wear rate and poor surface quality, but this can be reduced by Electrical Discharge Machining (EDM) method. Moreover, EDM produce good biological and corrosion resistant surface. In this research, experiments were conducted by considering the influential process factors such as pulse on time, pulse off time, voltage, and current. The experiments were designed based on Response Surface Methodology (RSM) of face centered central composite design. Analysis of Variance (ANOVA) was conducted to identify the significance process factors and their relation to output responses such as Electrode Wear Rate (EWR), Surface Roughness (SR) and Material Removal Rate (MRR). Further, an empirical model was developed by RSM in order to predict the output responses.
    Matched MeSH terms: Analysis of Variance
  8. Wan Nur ‘Amirah Ibrahim, Zainora Mohammed, Norliza Mohamad Fadzil, Sumithira Narayanasamy, Mohd ‘Izzuddin Hairol
    Sains Malaysiana, 2018;47:1835-1842.
    Illumination is one of the important physical aspects that influences comfortability during learning session particularly
    among visually impaired students. The purpose of this study was to determine changes in illumination level in classrooms
    during learning session at Sekolah Menengah Pendidikan Khas (SMPK), Setapak. The second objective was to compare
    the illumination level in the classrooms under three different lighting conditions: daylight only, with additional artificial
    light and with removal of obstructions to daylight. Illumination levels in 17 classrooms was measured at one hour interval,
    between 8 am to 1 pm for the first stage and 19 classrooms under three different lighting conditions from 11 am to 12 noon
    for the second stage, using ILM1335 (ISO-TECH, Taiwan) digital luxmeter. Illumination level increased significantly from
    8 am to 11 am (One-Way Repeated Measures ANOVA: F(2.14, 34.26)=76.49, p<0 .001) and was maximum at 1 pm. The
    illumination level was highest for the condition of daylight with additional artificial light (One-Way Repeated Measures
    ANOVA: F(2,34)=110.51, p<0.001) compared to other conditions. Illumination levels for daylight without obstruction
    was significantly higher than daylight only (pairwise comparison: p=0.001). Classroom illumination level was lowest
    in the early morning. However, classroom illumination can be increased either by removing the obstructions to daylight
    or with additional artificial lighting.
    Matched MeSH terms: Analysis of Variance
  9. Noor Afiqah Md Noor, Maizura Murad, Effarizah Mohd Esah
    Sains Malaysiana, 2018;47:2047-2054.
    This study was designed to determine the physicochemical, antioxidant and microbial properties of fresh sugarcane juice
    with calamansi juice addition. The sugarcane that was used in the experiments was the black cane variety (Saccharum
    officinarum). Sugarcane pressed with and without their peel was juiced and added with calamansi juice before analysis
    was carried out. Standard method was used to analyse physicochemical properties such as pH, total soluble solids,
    acidity and colour of sugarcane juice. Total phenolic content (TPC), DPPH and FRAP assay were conducted for antioxidant
    properties. Total plate count and yeast and mould count were carried out for the microbiological analyses. Two way
    analysis of variance (ANOVA) shows significant (p<0.05) difference on colour of sugarcane juiced after extraction with and
    without peel. There were no significant (p>0.05) difference shown for pH, acidity and total soluble solids of sugarcane
    juice pressed with and without peel. Sugarcane juice pressed with peel produced higher antioxidant value compared
    to sugarcane pressed without peel. However, sugarcane juice pressed without peeled showed a lower microbial count
    compared to sugarcane juice pressed with peel. The addition of calamansi juice proved to have significant (p<0.05)
    effect on colour, antioxidant and microbial count of the sugarcane juices.
    Matched MeSH terms: Analysis of Variance
  10. Yusoff N, Anuar NN, Reza MF
    Malays J Med Sci, 2018 May;25(3):103-110.
    PMID: 30899191 MyJurnal DOI: 10.21315/mjms2018.25.3.10
    Background: Sex is a psychobiological factor that is important in the process of emotion. This study determines the effect of sex on the electropsychological process of various intensities of emotional arousal.

    Methods: In the Event-related Potential (ERP) session, electroencephalographic (EEG) data was recorded for 90 participants, 60% of whom were females. The participants responded to 30 universal emotional pictures, randomly chosen from the International Affective Picture System (IAPS), which were classified as invoking high, moderate, and low intensity of emotional arousal.

    Results: From the analysis of variance of two-way mixed design, the interaction between sex and emotional intensity was observed in the occipital regions (O2), indexed by the amplitude of P300 and N200 components. Males exhibited higher amplitude of P300 and N200 components (in the occipital region) as responded to high and low emotional arousal stimuli than females.

    Conclusion: Sex is a fundamental factor that modulates psychological states in reaction to emotional stimuli.

    Matched MeSH terms: Analysis of Variance
  11. Al-Qazzaz NK, Bin Mohd Ali SH, Ahmad SA, Islam MS, Escudero J
    Sensors (Basel), 2015;15(11):29015-35.
    PMID: 26593918 DOI: 10.3390/s151129015
    We performed a comparative study to select the efficient mother wavelet (MWT) basis functions that optimally represent the signal characteristics of the electrical activity of the human brain during a working memory (WM) task recorded through electro-encephalography (EEG). Nineteen EEG electrodes were placed on the scalp following the 10-20 system. These electrodes were then grouped into five recording regions corresponding to the scalp area of the cerebral cortex. Sixty-second WM task data were recorded from ten control subjects. Forty-five MWT basis functions from orthogonal families were investigated. These functions included Daubechies (db1-db20), Symlets (sym1-sym20), and Coiflets (coif1-coif5). Using ANOVA, we determined the MWT basis functions with the most significant differences in the ability of the five scalp regions to maximize their cross-correlation with the EEG signals. The best results were obtained using "sym9" across the five scalp regions. Therefore, the most compatible MWT with the EEG signals should be selected to achieve wavelet denoising, decomposition, reconstruction, and sub-band feature extraction. This study provides a reference of the selection of efficient MWT basis functions.
    Matched MeSH terms: Analysis of Variance
  12. Seow LL, Toh CG, Wilson NH
    J Dent, 2015 Jan;43(1):126-32.
    PMID: 25448436 DOI: 10.1016/j.jdent.2014.10.001
    OBJECTIVES: The aim of this study was to investigate the recovery of cuspal stiffness and fracture resistance in endodontically treated maxillary premolars restored with bonded ceramic inlays and onlays of various designs.
    METHODS: Seventy intact premolars were selected for this study; six cavity designs were investigated: (i) mesio-occlusal-distal (MOD) inlay (I), (ii) MOD inlay with palatal cusp coverage (IPC), (iii) MOD onlay (O), (iv) MOD inlay with pulp chamber extension (IPE), (v) MOD inlay with palatal cusp coverage and pulp chamber extension (IPCPE), and (vi) MOD onlay with pulp chamber extension (OPE). Intact teeth acted as control. Strain gauges were attached to the buccal and palatal surfaces of the teeth to measure cuspal stiffness under static loading. All specimens were eventually subjected to compressive load to failure. Cuspal stiffness and fracture resistance data were analyzed using ANOVA and Tukey test.
    RESULTS: The I and IPE restorations restored cuspal stiffness to 75% of the sound tooth value. The O and OPE restored teeth had stiffness values greater than that of a sound tooth. The I, IPC, O, IPE, IPCPE and OPE restored teeth demonstrated fracture strength values of 938N±113 N (s.d.), 1073N±176 N and 1317N±219 N, 893N±129 N, 1062N±153 N and 1347N±191 N respectively.
    CONCLUSIONS: Within the limitations of this study, it was concluded that the all-ceramic onlay or inlay with palatal cusp coverage provided best biomechanical advantage in restoring an endodontically treated maxillary premolar tooth.
    CLINICAL SIGNIFICANCE: The onlay approach which is more conservative compared to full coverage restoration is considered an appropriate approach to the restoration of endodontically treated maxillary premolars. The addition of a pulpal extension to the all-ceramic restorations, apart from being technically challenging, was not found to offer any biomechanical advantage to the restored teeth.
    KEYWORDS: Endodontically treated teeth; Fracture strengths; Inlay; Onlay; Pulp chamber extension; Strains
    Matched MeSH terms: Analysis of Variance
  13. Ebrahimiasl S, Zakaria A
    Sensors (Basel), 2014;14(2):2549-60.
    PMID: 24509767 DOI: 10.3390/s140202549
    A nanocrystalline SnO2 thin film was synthesized by a chemical bath method. The parameters affecting the energy band gap and surface morphology of the deposited SnO2 thin film were optimized using a semi-empirical method. Four parameters, including deposition time, pH, bath temperature and tin chloride (SnCl2·2H2O) concentration were optimized by a factorial method. The factorial used a Taguchi OA (TOA) design method to estimate certain interactions and obtain the actual responses. Statistical evidences in analysis of variance including high F-value (4,112.2 and 20.27), very low P-value (<0.012 and 0.0478), non-significant lack of fit, the determination coefficient (R2 equal to 0.978 and 0.977) and the adequate precision (170.96 and 12.57) validated the suggested model. The optima of the suggested model were verified in the laboratory and results were quite close to the predicted values, indicating that the model successfully simulated the optimum conditions of SnO2 thin film synthesis.
    Matched MeSH terms: Analysis of Variance
  14. Masood M, Reidpath DD
    Curr Med Res Opin, 2014 May;30(5):857-63.
    PMID: 24328497 DOI: 10.1185/03007995.2013.875466
    BACKGROUND: The aim of this paper was to review the types of approaches currently utilized in the analysis of multi-country survey data, specifically focusing on design and modeling issues with a focus on analyses of significant multi-country surveys published in 2010.
    METHODS: A systematic search strategy was used to identify the 10 multi-country surveys and the articles published from them in 2010. The surveys were selected to reflect diverse topics and foci; and provide an insight into analytic approaches across research themes. The search identified 159 articles appropriate for full text review and data extraction.
    RESULTS: The analyses adopted in the multi-country surveys can be broadly classified as: univariate/bivariate analyses, and multivariate/multivariable analyses. Multivariate/multivariable analyses may be further divided into design- and model-based analyses. Of the 159 articles reviewed, 129 articles used model-based analysis, 30 articles used design-based analyses. Similar patterns could be seen in all the individual surveys.
    CONCLUSION: While there is general agreement among survey statisticians that complex surveys are most appropriately analyzed using design-based analyses, most researchers continued to use the more common model-based approaches. Recent developments in design-based multi-level analysis may be one approach to include all the survey design characteristics. This is a relatively new area, however, and there remains statistical, as well as applied analytic research required. An important limitation of this study relates to the selection of the surveys used and the choice of year for the analysis, i.e., year 2010 only. There is, however, no strong reason to believe that analytic strategies have changed radically in the past few years, and 2010 provides a credible snapshot of current practice.
    Matched MeSH terms: Analysis of Variance
  15. Bashir MJ, Aziz HA, Yusoff MS, Aziz SQ, Mohajeri S
    J Hazard Mater, 2010 Oct 15;182(1-3):115-22.
    PMID: 20580491 DOI: 10.1016/j.jhazmat.2010.06.005
    The treatability of stabilized sanitary landfill leachate via synthetic anion exchange resin (INDION FFIP MB) was investigated. An ideal experimental design was conducted based on central composite design using a response surface methodology to assess individual and interactive effects of critical operational variables (i.e., anionic dosage; contact time; shaking speed) and pH on treatment performance in terms of color, chemical oxygen demand (COD), suspended solid (SS), and turbidity removal efficiencies. Optimum operational conditions were established as 30.9 cm(3) anionic dosage, 90 min contact time, 150 rpm shaking speed, and pH 3.1. Under these conditions, the color, COD, SS, and turbidity removal efficiencies of 91.5, 70.3, 93.1, and 92.4% were experimentally attained and were found to fit well with the prediction model. According to these results, stabilized leachate treatment using INDION FFIP MB could be an effective alternative in the administration of color, COD, SS, and turbidity problems of landfill leachates.
    Matched MeSH terms: Analysis of Variance
  16. Rosli TI, Abdul Rahman R, Abdul Rahman SR, Ramli R
    Singapore Dent J, 2005 Dec;27(1):17-22.
    PMID: 16438264
    The objectives of this study were to determine the sources of stress among undergraduate dental students, and to compare the sources of stress among the 5 years of undergraduate study, between gender, and with other studies done elsewhere. A total of 325 students across the 5 academic years (88.8% response rate) of the Faculty of Dentistry, Universiti Kebangsaan Malaysia, completed the modified Dental Environment Stress questionnaire. All respondents reported that they experienced some form of stress. The preclinical students reported that examinations and fear of failure caused the most stress. The main stressor for clinical students was clinical training, particularly factors relating to meeting clinical requirements. Female students perceived more stress generally than male students. However, male students were more stressed when faced with factors related to clinical training.
    Matched MeSH terms: Analysis of Variance
  17. Lee WC, Khoo BE, Bin Abdullah AF, Abdul Aziz ZB
    J Forensic Sci, 2013 May;58(3):658-63.
    PMID: 23488634 DOI: 10.1111/1556-4029.12103
    Bloodstain photography is important in forensic applications, especially for bloodstain pattern analysis. This study compares the enhancement effect of bloodstain photography using three different types of light source: fluorescent white light, near-ultraviolet (UV) light-emitting diode (LED) light, and 410 nm LED light. Randomized complete block designs were implemented to identify the lighting that would statistically produce the best enhancement results for bloodstains on different types of surfaces. Bloodstain samples were prepared on white cotton, brown carpet, tar road, and wood. These samples were photographed in darkroom conditions using a Canon EOS 50D digital SLR camera, with Canon EFS 60 mm f/2.8 Macro USM lens. Two-way analysis of variance and Fisher's least significant difference test were used to analyze the contrast of the images. The statistical analysis showed that 410 nm light is the best among the tested lights for enhancing bloodstains on the tested surfaces, where the contrast of bloodstain to background was the highest.
    Matched MeSH terms: Analysis of Variance
  18. Trivedi K, Bhaskar V, Ganesh M, Venkataraghavan K, Choudhary P, Shah S, et al.
    J Pharm Bioallied Sci, 2015 Aug;7(Suppl 2):S474-80.
    PMID: 26538901 DOI: 10.4103/0975-7406.163508
    AIM: This study evaluates erosive potential of commonly used beverages, medicated syrup, and their effects on dental enamel with and without restoration in vitro.

    MATERIALS AND METHODS: Test medias used in this study included carbonated beverage, noncarbonated beverage, high-energy sports drink medicated cough syrup, distilled water as the control. A total of 110 previously extracted human premolar teeth were selected for the study. Teeth were randomly divided into two groups. Test specimens were randomly distributed to five beverages groups and comprised 12 specimens per group. Surface roughness (profilometer) readings were performed at baseline and again, following immersion for 14 days (24 h/day). Microleakage was evaluated. The results obtained were analyzed for statistical significance using SPSS-PC package using the multiple factor ANOVA at a significance level of P < 0.05. Paired t-test, Friedman test ranks, and Wilcoxon signed ranks test.

    RESULTS: For surface roughness high-energy sports drink and noncarbonated beverage showed the highly significant difference with P values of 0.000 and 0.000, respectively compared to other test media. For microleakage high-energy sports drink had significant difference in comparison to noncarbonated beverage (P = 0.002), medicated syrup (P = 0.000), and distilled water (P = 0.000).

    CONCLUSION: High-energy sports drink showed highest surface roughness value and microleakage score among all test media and thus greater erosive potential to enamel while medicated syrup showed least surface roughness value and microleakage among all test media.

    Matched MeSH terms: Analysis of Variance
  19. Shahid F, Alam MK, Khamis MF
    Eur J Dent, 2016 4 21;10(2):176-182.
    PMID: 27095892 DOI: 10.4103/1305-7456.178299
    OBJECTIVE: Comprehensive diagnosis and treatment planning are essential in a successful orthodontic practice. The purpose of this study is to determine and compare intermaxillary tooth size discrepancy (IMTSD) using traditional digital caliper (DC) measurement on plaster dental models and stereomicroscopic digital dental models (SM).

    MATERIALS AND METHODS: The samples were randomly selected from different states of Pakistan. Total 7168 variables were measured on plaster dental casts (128) and SM digital dental models (128) according to the selection criteria. For IMTSD, the 6 variable measured as for anterior tooth size (maxilla, mandibular), overall tooth size (maxilla, mandibular), Bolton's anterior ratios (BAR), and Bolton's overall ratios (BOR). The independent t-test and ANOVA were used for statistical analyses.

    RESULTS: Significant sexual disparities in the sum of anterior tooth size and overall tooth size via DC and SM methods. No significant sexual disparities for BAR and BOR. No statistically significant differences were found in BAR and BOR between DC and SM. No significant differences were found on IMTSD ratio among different arch length and arch perimeters groups.

    CONCLUSIONS: Norms were developed based on DC and SM for IMTSD. Sexual disparities were observed in the sum of teeth size. However, no significant differences in BAR and BOR for IMTSD between the two methods.

    Matched MeSH terms: Analysis of Variance
  20. Shahid F, Alam MK, Khamis MF
    Eur J Dent, 2016 3 2;9(4):490-499.
    PMID: 26929686 DOI: 10.4103/1305-7456.172620
    OBJECTIVE: To investigate the maxillary and mandibular anterior crown width/height ratio and its relation to various arch perimeters, arch length, and arch width (intercanine, interpremolar, and intermolar) groups.

    MATERIALS AND METHODS: The calculated sample size was 128 subjects. The crown width/height, arch length, arch perimeter, and arch width of the maxilla and mandible were obtained via digital calliper (Mitutoyo, Japan). A total of 4325 variables were measured. The sex differences in the crown width and height were evaluated. Analysis of variance was applied to evaluate the differences between arch length, arch perimeter, and arch width groups.

    RESULTS: Males had significantly larger mean values for crown width and height than females (P ≤ 0.05) for maxillary and mandibular arches, both. There were no significant differences observed for the crown width/height ratio in various arch length, arch perimeter, and arch width (intercanine, interpremolar, and intermolar) groups (P ≤ 0.05) in maxilla and mandible, both.

    CONCLUSIONS: Our results indicate sexual disparities in the crown width and height. Crown width and height has no significant relation to various arch length, arch perimeter, and arch width groups of maxilla and mandible. Thus, it may be helpful for orthodontic and prosthodontic case investigations and comprehensive management.

    Matched MeSH terms: Analysis of Variance
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links