Displaying publications 41 - 60 of 150 in total

Abstract:
Sort:
  1. Cling film plastic wrap: An innovation for dead body packaging, preservation and transportation by first responders as a replacement for cadaver body bag in large scale disasters
    Khoo LS, Lai PS, Saidin MH, Noor Z, Mahmood MS
    Forensic Sci Int, 2018 Apr;285:50-57.
    PMID: 29433011 DOI: 10.1016/j.forsciint.2018.01.018
    Cadaver body bags are the conventional method to contain a human body or human remains, which includes the use for storage and transportation of the deceased at any crime scene or disaster scene. During disasters, most often than not, the first responders including the police will be equipped with cadaver body bags to do scene processing of human remains and collection of personal belongings at the disaster site. However, in an unanticipated large scale disasters involving hundreds and thousands of fatalities, cadaver body bags supplies may be scarce. The authors have therefore innovated the cling film plastic wrap as an alternative for the cadaver body bag used at the disaster site. The plastic wrap was tested on six different experimental subjects, i.e. both adult and child mannequins; body parts of the mannequin figure (arm and hand); a human adult subject and an unknown dead body. The strengths of the cling film plastic wrap are discussed in comparison with the cadaver body bag in the aspects of costing, weight, duration of the wrap, water and body fluid resistant properties, visibility and other advantages. An average savings of more than 5000% are noted for both adult body wrap and child body wrap compared to the cadaver body wrap. This simply means that the authors can either wrap 25 adult dead bodies or 80 children dead bodies with the cost of 1 cadaver body bag. The cling film plastic wrap has proven to have significant innovation impact for dead body management particularly by the first responders in large scale disasters. With proper handling of dead bodies, first responders can manage the dead with dignity and respect in an overwhelmed situation to facilitate the humanitarian victim identification process later.
    Matched MeSH terms: Cadaver*
  2. Colonization of Rabbit Carcasses by Drain Fly Larvae, Psychoda sp. (Diptera: Psychodidae): The First Report
    Azmiera N, Low VL, Heo CC
    Acta Parasitol, 2021 Jun;66(2):706-709.
    PMID: 33389626 DOI: 10.1007/s11686-020-00313-z
    INTRODUCTION: Psychoda sp. is often collected from patchy habitats such as sewers, drains and decomposing organic matters. The discovery of Psychoda sp. in forensic studies indicated that it might have noteworthy value in assisting death investigations.

    PURPOSE: This study reports on the first finding of Psychoda larvae collected from decomposing rabbit carcasses placed in Cameron Highlands, Pahang, Malaysia.

    METHODS: The larvae were first observed on rabbit carcasses and were collected using tweezers and carefully preserved in 70% ethanol. They were subsequently mounted on microscopy slides using Hoyer's medium and identified as Psychoda sp. morphologically. The identification was also confirmed through a DNA barcoding analysis.

    RESULTS: Psychoda sp. larvae were collected on day-10 post-mortem where the rabbit carcasses were at the advanced decay stage of decomposition. The cytochrome c oxidase I (COI) gene sequences of the larvae had 90% similarity with the Psychoda spp. in the database.

    CONCLUSION: The finding of these larvae on carrion may provide additional valuable insights into forensic entomology and may assist in death investigations.

    Matched MeSH terms: Cadaver
  3. Common celiaco-mesenterico-phrenic trunk and renal vascular variations
    Nayak S
    Saudi Med J, 2006 Dec;27(12):1894-6.
    PMID: 17143371
    The knowledge of vascular variations like other anatomical variations, is important during the operative, diagnostic, and endovascular procedures in abdomen. This report describes multiple variations in the upper abdominal vessels as found during the routine dissection in a 60-year-old male cadaver. The variations found were; presence of a celiaco-mesenterico-phrenic trunk, a common inferior phrenic trunk, 2 right renal arteries originating from abdominal aorta, 2 suprarenal arteries originating from the lower right renal artery, 3 right renal veins opening separately into inferior vena cava, and termination of right testicular vein into the lowest vein among the 3 right renal veins. The existence of a celiaco-mesenterico-phrenic trunk has not been reported yet. Although, other variations reported in this case exist as individual variations, a concomitant variation of them has not been reported yet. The knowledge of such variations is quite useful in planning any upper abdominal surgery.
    Matched MeSH terms: Cadaver
  4. Comparison between percutaneous fluoroscopic-guided and conventional open pedicle screw placement techniques for the thoracic spine: a safety evaluation in human cadavers
    Kwan MK, Chiu CK, Lee CK, Chan CY
    Bone Joint J, 2015 Nov;97-B(11):1555-61.
    PMID: 26530660 DOI: 10.1302/0301-620X.97B11.35789
    Percutaneous placement of pedicle screws is a well-established technique, however, no studies have compared percutaneous and open placement of screws in the thoracic spine. The aim of this cadaveric study was to compare the accuracy and safety of these techniques at the thoracic spinal level. A total of 288 screws were inserted in 16 (eight cadavers, 144 screws in percutaneous and eight cadavers, 144 screws in open). Pedicle perforations and fractures were documented subsequent to wide laminectomy followed by skeletalisation of the vertebrae. The perforations were classified as grade 0: no perforation, grade 1: < 2 mm perforation, grade 2: 2 mm to 4 mm perforation and grade 3: > 4 mm perforation. In the percutaneous group, the perforation rate was 11.1% with 15 (10.4%) grade 1 and one (0.7%) grade 2 perforations. In the open group, the perforation rate was 8.3% (12 screws) and all were grade 1. This difference was not significant (p = 0.45). There were 19 (13.2%) pedicle fractures in the percutaneous group and 21 (14.6%) in the open group (p = 0.73). In summary, the safety of percutaneous fluoroscopy-guided pedicle screw placement in the thoracic spine between T4 and T12 is similar to that of the conventional open technique.
    Matched MeSH terms: Cadaver
  5. Comparison of patient survival between various subgroups among renal transplant patients: a single center experience
    Go KW, Teo SM
    Transplant Proc, 2004 Sep;36(7):2046-7.
    PMID: 15518740
    To compare patient graft survival between various subgroups among renal transplant patients.
    Matched MeSH terms: Cadaver
  6. Fulltext Complex pattern of a variant hepatic artery
    Hlaing KP, Othman F
    Singapore Med J, 2012 Sep;53(9):e186-8.
    PMID: 23023911
    Liver transplantation is the only solution for end-stage liver diseases. The common hepatic artery (CHA) arises from the coeliac trunk (CT), and the right (RHA) and left hepatic (LHA) arteries are its terminal branches. An abnormal arterial pattern would influence the surgical outcome. The anterior layer of the lesser omentum of a female cadaver was cleaned to identify the CHA, which was traced backwards for its origin and toward the porta hepatis for its terminal branches. In this case, the replaced RHA originated from the CT and ran posterior to the portal vein and the common bile duct. The replaced LHA arose from the left gastric artery. The CHA originated from the CT and branched out as the middle hepatic and gastroduodenal arteries. The replaced RHA and LHA with alteration in relation to the neighbouring structures is a complex and rare variant. Knowledge of this uncommon arterial anomaly is beneficial for hepatobiliary surgeons.
    Matched MeSH terms: Cadaver
  7. Fulltext Concomitant Anomalous branching of Facial Nerve and Double Parotid Duct: A case report
    Amro Mohamed Soliman, Elvy Suhana Ramli, Srijit Das, Norzana Abd Ghafar
    International Medical Journal Malaysia, 2017;16(1):139-142.
    MyJurnal
    The facial nerve divides within the parotid gland into upper temporozygomatic and lower cervicofacial branches. The two branches further subdivide and emerge from the parotid gland as five main branches. We observed a rare anomalous branching pattern of the facial nerve along with double parotid duct on the right side of a 50-year-old male cadaver. The two parotid ducts emerged at the level of the anterior border of parotid gland then united to form one single duct thereby opened into the oral cavity. The first duct (D1) emerged from the upper one third of the anterior border of the parotid gland and traversed horizontally for 9 mm to join the second duct. Knowledge of anomalous branching pattern of facial nerve and double parotid ducts may be beneficial for maxillofacial surgeons.
    Matched MeSH terms: Cadaver
  8. Concurrent Variations of Celiac and Superior Mesenteric Arteries
    Satheesha Nayak B, Shetty SD, Sirasanagandla SR, Kumar N, Swamy Ravindra S, Abhinitha P
    Kathmandu Univ Med J (KUMJ), 2019 11 16;16(64):345-347.
    PMID: 31729351
    Celiac trunk is the first ventral branch of the abdominal aorta. It usually terminates by giving three branches; the common hepatic artery, the left gastric artery and the splenic artery. We report a rare variation of the branching pattern of the celiac trunk. The Celiac trunk divided into two branches; left gastric artery and splenicogastroduodenal trunk. The splenico-gastroduodenal trunk divided into splenic and gastroduodenal arteries. The superior mesenteric artery and hepatic artery took origin from a common hepato-mesenteric trunk. The hepatic artery had a winding course around the portal vein and hepatic duct. The knowledge of these variations is important while doing radiological investigations and liver transplant and pancreatic surgeries.
    Matched MeSH terms: Cadaver
  9. Fulltext Conduct of body donation and cadaveric dissection training during the COVID-19 pandemic: challenges, impacts and mitigation
    Wong LP, Alias H, Tan SL, Saw A
    Anat Sci Int, 2023 Sep;98(4):558-565.
    PMID: 37072599 DOI: 10.1007/s12565-023-00723-9
    The new coronavirus disease 2019 (COVID-19) has had a substantial impact on the Silent Mentor Programme (SMP), a programme in which members of the public may pledge their bodies to be used for medical training and research after their death. This study aimed to explore the conduct of body donations and simulation surgery training during the COVID-19 pandemic from the viewpoints of the committee members of the SMP and the next-of-kin of body donor pledgers. This study utilised a qualitative exploration method to seek an in-depth understanding of this phenomenon. In-depth individual interviews were carried out. Thematic analysis was used to identify patterns of themes. The COVID-19 polymerase chain reaction (RT-PCR) test is compulsory before accepting a body donation, and this resulted in the turning down of several donations. Being a donor is the final wish of pledgers and this turning down led to a negative emotional remorseful feeling in the next-of-kin of pledgers. From the perspective of students, it is feared that the conduct of the programme, particularly the home visit session being held online, has impeded teaching of humanistic values, compassion, and empathy, which is the prime philosophy of the programme. Previous to the pandemic, the programme ceremonies were well-attended, denoting the utmost respect and recognition of the mentors; however, travel restrictions due to the pandemic limiting in-person attendance resulted in ceremonies becoming less impactful. Continuous postponements of cadaveric dissection training also resulted in students missing training opportunities, hence potentially impairing their professional practice and humanistic values in the medical profession. Counselling interventions should be directed at easing the negative psychological impact on the next-of-kin of pledgers. As the COVID-19 pandemic may pose a significant impediment to achieving the educational outcomes of cadaveric dissection training, efforts to make up for these gaps are essential.
    Matched MeSH terms: Cadaver
  10. Congenital arteriovenous communication in the arm: a cadaveric study
    Das S, Othman F, Suhaimi FH, Latiff AA
    Rom J Morphol Embryol, 2008;49(3):421-3.
    PMID: 18758652
    An abnormal communication between an artery and a vein is known as arteriovenous malformation (AVM) or arteriovenous fistula (AVF). The AVM or the AVF might be congenital in origin or even acquired. The arteriovenous communications are usually surgically made in patients undergoing repeated hemodialysis, while suffering from any chronic renal disease. The abnormal arteriovenous communications may be asymptomatic in nature. The arteriovenous communications might be an incidental finding during any anatomical dissections or medico-legal autopsies. The present study reports the presence of BBC on both sides of a 54-year-old male cadaver who died of road traffic accident. There was a communication between the brachial artery and the brachial vein, 11.5 cm above the medial epicondyle. The oblique communicating channel measured 1.5 cm in length and connected the brachial artery to the brachial vein. A detailed histological study of the communication showed the presence of thick tunica media. Knowledge of arteriovenous communications may be beneficial for any academic studies and equally important for vascular surgeons and radiologists performing angiographic studies.
    Matched MeSH terms: Cadaver
  11. Fulltext DNA typing of Calliphorids collected from human corpses in Malaysia
    Kavitha R, Tan TC, Lee HL, Nazni WA, Sofian-Azirun M
    Trop Biomed, 2013 Mar;30(1):119-24.
    PMID: 23665717 MyJurnal
    Estimation of post-mortem interval (PMI) is crucial for time of death determination. The advent of DNA-based identification techniques forensic entomology saw the beginning of a proliferation of molecular studies into forensically important Calliphoridae (Diptera). The use of DNA to characterise morphologically indistinguishable immature calliphorids was recognised as a valuable molecular tool with enormous practical utility. The local entomofauna in most cases is important for the examination of entomological evidences. The survey of the local entomofauna has become a fundamental first step in forensic entomological studies, because different geographical distributions, seasonal and environmental factors may influence the decomposition process and the occurrence of different insect species on corpses. In this study, calliphorids were collected from 13 human corpses recovered from indoors, outdoors and aquatic conditions during the post-mortem examination by pathologists from the government hospitals in Malaysia. Only two species, Chrysomya megacephala and Chrysomya rufifacies were recovered from human corpses. DNA sequencing was performed to study the mitochondrial encoded COI gene and to evaluate the suitability of the 1300 base pairs of COI fragments for identification of blow fly species collected from real crime scene. The COI gene from blow fly specimens were sequenced and deposited in GenBank to expand local databases. The sequenced COI gene was useful in identifying calliphorids retrieved from human corpses.
    Matched MeSH terms: Cadaver*
  12. Fulltext Deceased Donor Organs: What Can Be Done to Raise Donation Rates Using Evidence From Malaysia?
    Rasiah R, Manikam R, Chandrasekaran SK, Naghavi N, Mubarik S, Mustafa R, et al.
    Am J Transplant, 2016 05;16(5):1540-7.
    PMID: 26602367 DOI: 10.1111/ajt.13603
    Organ donation rates have continued to fall seriously short of needs worldwide, with the lowest rates recorded among developing economies. This study seeks to analyze evidence from a developing economy to explore the usefulness of social psychological theory to solve the problem. The study deployed a large survey (n = 10 412) using a convenience sampling procedure targeted at increasing the number of Malaysians registered with the Ministry of Health, Malaysia who are willing to donate organs upon death. Structural equation modeling was deployed to estimate simultaneously the relative influence of cognitive and noncognitive variables on willingness to donate deceased organs. The cognitive factors of donation perception, socioeconomic status and financial incentives, and the noncognitive factors of demography and fear showed a high statistically significant (1%) relationship with willingness to donate organs after death. While financial incentives were significant, cash rewards showed the least impact. Donation perception showed the highest impact, which shows that the development of effective pedagogic programs with simultaneous improvements to the quality of services provided by medical personnel engaged in retrieving and transplanting deceased donor organs can help raise organ donation rates.
    Matched MeSH terms: Cadaver
  13. Decomposition process and post mortem changes: review
    Teo Chee Hau, Noor Hazfalinda Hamzah, Hing Hiang Lian, Sri Pawita Albakri Amir Hamzah
    Sains Malaysiana, 2014;43:1873-1882.
    Decomposition is degradation process of a corpse into basic respective constituents macroscopically and microscopically by action of microorganisms, arthropods and scavengers. Post mortem changes could be separated into early post mortem changes (i.e. algor mortis, rigor mortis and livor mortis) and putrefaction stages of corpse. These changes function as suitable indicators for determination of post mortem interval (PMI). In this paper, different stages of post mortem changes, possible variations such as mummification and formation of adipocere and special circumstances such as burial condition is discussed. This article also refers to several arguments in the different texture of adipocere and the influence of different types of fabric in affecting the post mortem changes and formation of adipocere. This is largely due to the property of permeability and resistance of material against degradation process. Undeniably, decomposition process involves numerous potential variables including burial condition, presence of clothing, potential formation of adipocere and mummification. Hence, studies in forensic taphonomy combined with real case scenario are crucial in understanding the nature of decomposition and estimation of PMI with higher accuracy.
    Matched MeSH terms: Cadaver
  14. Fulltext Deep-Freezing Temperatures During Irradiation Preserves the Compressive Strength of Human Cortical Bone Allografts: A Cadaver Study
    Yang Harmony TC, Yusof N, Ramalingam S, Baharin R, Syahrom A, Mansor A
    Clin Orthop Relat Res, 2022 Feb 01;480(2):407-418.
    PMID: 34491235 DOI: 10.1097/CORR.0000000000001968
    BACKGROUND: Gamma irradiation, which minimizes the risk of infectious disease transmission when human bone allograft is used, has been found to negatively affect its biomechanical properties. However, in those studies, the deep-freezing temperature during irradiation was not necessarily maintained during transportation and sterilization, which may have affected the findings. Prior reports have also suggested that controlled deep freezing may mitigate the detrimental effects of irradiation on the mechanical properties of bone allograft.

    QUESTION/PURPOSE: Does a controlled deep-freezing temperature during irradiation help preserve the compressive mechanical properties of human femoral cortical bone allografts?

    METHODS: Cortical bone cube samples, each measuring 64 mm3, were cut from the mid-diaphyseal midshaft of five fresh-frozen cadaver femurs (four male donors, mean [range] age at procurement 42 years [42 to 43]) and were allocated via block randomization into one of three experimental groups (with equal numbers of samples from each donor allocated into each group). Each experimental group consisted of 20 bone cube samples. Samples irradiated in dry ice were subjected to irradiation doses ranging from 26.7 kGy to 27.1 kGy (mean 26.9 kGy) at a deep-freezing temperature below -40°C (the recommended long-term storage temperature for allografts). Samples irradiated in gel ice underwent irradiation doses ranging from 26.2 kGy and 26.4 kGy (mean 26.3 kGy) in a freezing temperature range between -40°C and 0°C. Acting as controls, samples in a third group were not subjected to gamma irradiation. The mechanical properties (0.2% offset yield stress, ultimate compression stress, toughness, and the Young modulus) of samples from each group were subsequently evaluated via axial compression loading to failure along the long axis of the bone. The investigators were blinded to sample group during compression testing.

    RESULTS: The mean ultimate compression stress (84 ± 27 MPa versus 119 ± 31 MPa, mean difference 35 [95% CI 9 to 60]; p = 0.005) and toughness (3622 ± 1720 kJ/m3 versus 5854 ± 2900 kJ/m3, mean difference 2232 [95% CI 70 to 4394]; p = 0.009) of samples irradiated at a higher temperature range (-40°C to 0°C) were lower than in those irradiated at deep-freezing temperatures (below -40°C). The mean 0.2% offset yield stress (73 ± 28 MPa versus 109 ± 38 MPa, mean difference 36 [95% CI 11 to 60]; p = 0.002) and ultimate compression stress (84 ± 27 MPa versus 128 ± 40 MPa, mean difference 44 [95% CI 17 to 69]; p < 0.001) of samples irradiated at a higher temperature range (-40°C to 0°C) were lower than the nonirradiated control group samples. The mean 0.2% offset yield stress (73 ± 28 MPa versus 101 ± 28 MPa, mean difference 28 [95% CI 3 to 52]; p = 0.02; effect size = 1.0 [95% CI 0.8 to 1.2]) of samples irradiated at higher temperature range (-40°C to 0°C) were no different with the numbers available to those irradiated at deep-freezing temperature. The mean toughness (3622 ± 1720 kJ/m3 versus 6231 ± 3410 kJ/m3, mean difference 2609 [95% CI 447 to 4771]; p = 0.02; effect size = 1.0 [95% CI 0.8 to 1.2]) of samples irradiated at higher temperature range (-40°C to 0°C) were no different with the numbers available to the non-irradiated control group samples. The mean 0.2% offset yield stress, ultimate compression stress, and toughness of samples irradiated in deep-freezing temperatures (below -40°C) were not different with the numbers available to the non-irradiated control group samples. The Young modulus was not different with the numbers available among the three groups.

    CONCLUSION: In this study, maintenance of a deep-freezing temperature below -40°C, using dry ice as a cooling agent, consistently mitigated the adverse effects of irradiation on the monotonic-compression mechanical properties of human cortical bone tissue. Preserving the mechanical properties of a cortical allograft, when irradiated in a deep-freezing temperature, may have resulted from attenuation of the deleterious, indirect effects of gamma radiation on its collagen architecture in a frozen state. Immobilization of water molecules in this state prevents radiolysis and the subsequent generation of free radicals. This hypothesis was supported by an apparent loss of the protective effect when a range of higher freezing temperatures was used during irradiation.

    CLINICAL RELEVANCE: Deep-freezing temperatures below -40°C during gamma irradiation may be a promising approach to better retain the native mechanical properties of cortical bone allografts. A further study of the effect of deep-freezing during gamma radiation sterilization on sterility and other important biomechanical properties of cortical bone (such as, tensile strength, fracture toughness, and fatigue) is needed to confirm these findings.

    Matched MeSH terms: Cadaver
  15. Development patterns of necrophagous flies infesting rabbit carcasses decomposing in Mount Kapur Cave and its surrounding primary forest in Kuching, Sarawak
    Nordin NH, Ahmad UK, Abdul Rahim NA, Kamaluddin MR, Ismail D, Muda NW, et al.
    Trop Biomed, 2020 Jun 01;37(2):333-356.
    PMID: 33612803
    In addition to the scarcity of forensic entomology baseline data on oviposition of necrophagous insects and completion of their life cycles in the Borneo region, similar data derived from caves remain unreported. Since entomological baseline data can differ from one biogeoclimatic region to another, the lack of such data would limit the practical values of applying entomological evidence in estimating minimum postmortem interval (mPMI). Therefore, this present research that investigated oviposition and completion of life cycles of necrophagous flies infesting rabbit carcasses decomposing in Mount Kapur Cave and its surrounding forest habitat in Kuching, Sarawak merits forensic consideration. In general, 13 taxa of necrophagous flies were identified viz. Hypopygiopsis violacea, Hypopygiopsis fumipennis, Hemipyrellia ligurriens, Hemipyrellia tagaliana, Chrysomya megacephala, Chrysomya villeneuvi, Chrysomya rufifacies, Chrysomya chani, Chrysomya pinguis, Chrysomya nigripes, Ophyra spinigera and Ophyra chalcogaster, as well as unidentified Sarcophagidae. In addition, Hyp. violacea and Hyp. fumipennis were the two earlier necrophagous flies that oviposited in all rabbit carcasses decomposing in both habitats. While all these necrophagous flies were observed infesting carcasses in Mount Kapur Cave, Hem. ligurriens and Hem. tagaliana were not found infesting carcasses in the surrounding forest habitat. Complete life cycles for six and five different necrophagous fly species were successfully observed in Mount Kapur Cave and its surrounding forest habitat, respectively. Significant delay in oviposition, as well as longer durations for completing the life cycles in several necrophagous fly species were observed in Mount Kapur Cave when compared with those of surrounding forest habitat (p < 0.05). These findings deserve consideration as the first ever forensic empirical baseline data on oviposition and completion of life cycles for necrophagous flies in Sarawak as well as in a cave habitat, in view of its practical values for estimating mPMI for forensic practical caseworks.
    Matched MeSH terms: Cadaver
  16. Diagnostic accuracy of periapical radiography and cone beam computed tomography in detecting apical periodontitis using histopathological findings as a reference standard
    Kanagasingam S, Lim CX, Yong CP, Mannocci F, Patel S
    Int Endod J, 2017 May;50(5):417-426.
    PMID: 27063209 DOI: 10.1111/iej.12650
    AIM: To compare the diagnostic accuracy of periapical radiography (PR) and cone beam computed tomography (CBCT) in detecting apical periodontitis (AP) using histopathological findings as a reference standard.

    METHODOLOGY: Jaw sections containing 67 teeth (86 roots) were collected from unclaimed bodies due for cremation. Imaging was carried out to detect AP by digital PR with a central view (DP group), digital PR combining central with 10˚ mesially and distally angled (parallax) views (DPS group) and CBCT scans. All specimens underwent histopathological examination to confirm the diagnosis of AP. Sensitivity, specificity and predictive values of PR and CBCT were analysed using rater mean (n = 5). Receiver-operating characteristic (ROC) analysis was carried out.

    RESULTS: Sensitivity was 0.27, 0.38 and 0.89 for DP, DPS and CBCT scans, respectively. CBCT had specificity and positive predictive value of 1.0 whilst DP and DPS had specificity and positive predictive value of 0.99. The negative predictive value was 0.39, 0.44 and 0.81 for DP, DPS and CBCT scans, respectively. Area under the curve (AUC) for the various imaging methods was 0.629 (DP), 0.688 (DPS), and 0.943 (CBCT).

    CONCLUSIONS: All imaging techniques had similar specificity and positive predictive values. Additional parallax views increased the diagnostic accuracy of PR. CBCT had significantly higher diagnostic accuracy in detecting AP compared to PR, using human histopathological findings as a reference standard.

    Matched MeSH terms: Cadaver
  17. Fulltext Durability of cling film plastic wrap usage on dead body towards human decomposition changes
    Khoo LS, Mahmood MS
    Forensic science international. Synergy, 2020;2:72-75.
    PMID: 32412001 DOI: 10.1016/j.fsisyn.2020.01.003
    This study explores the practicability and usability of the cling film plastic wrap on the dead body with decomposition changes, whereby the feasibility of wrapping the remains to ensure the containment of the decomposition fluid within the cling film plastic wrap. Unknown and unclaimed dead bodies were used. Wrapping and preservation of human remains using the cling film plastic wrap could be the best operational practices for first responders rather than leaving bodies exposed on the disaster site, when the supplies of the cadaver body bags are inadequate. Thinking out of the box, the conventional way of using cadaver body bags to the cling film plastic wrap forms a new perspective in managing the dead and facilitating the human identification needs. New inventive idea of adopting the cling film plastic wrap as means of protecting the dignity of the dead person, could be the way forward in humanitarian forensic action.
    Matched MeSH terms: Cadaver
  18. Estimation of body height from spinal length measurements using post-mortem computed tomographic images
    Zyoud TYT, Abdul Rashid SN, Suppiah S, Mahmud R, Kabeer A, Abd Manaf R, et al.
    Malays J Pathol, 2020 Dec;42(3):423-431.
    PMID: 33361724
    INTRODUCTION: Post-mortem computed tomography (PMCT) provides information that helps in the determination of the cause of death and corpse identification of disaster victims. One of the methods for corpse identification includes assessment of the body stature. There is a lack of post-mortem imaging studies that focus on the anthropometric assessment of corpses. Our aim was to identify the relationship between cadaveric spine length and autopsy length (AL) among and autopsy length (AL) among a Malaysian population and derive a regression formula for the estimation of corpse body height using PMCT.

    MATERIALS AND METHODS: We retrospectively assessed 107 cadavers that had undergone conventional autopsy and PMCT. We made 5 measurements from the PMCT that included cervical length (CL), thoracic length (TL), lumbosacral length (LS), total column length of the spine, excluding the sacrum and coccyx (TCL), and ellipse line measurement of the whole spine, excluding the sacrum and coccyx (EL). We compared these anthropometric PMCT measurements with AL and correlated them using linear regression analysis.

    RESULTS: The results showed a significant linear relationship existed between TL and LS with AL, which was higher in comparison with the other parameters than the rest of the spine parameters. The linear regression formula derived was: 48.163 + 2.458 (TL) + 2.246 (LS).

    CONCLUSIONS: The linear regression formula derived from PMCT spine length parameters particularly thoracic and lumbar spine gave a finer correlation with autopsy body length and can be used for accurate estimation of cadaveric height. To the best of our knowledge, this is the first ever linear regression formula for cadaveric height assessment using only post mortem CT spine length measurements.

    Matched MeSH terms: Cadaver*
  19. Extent of maxillary sinus surgery and its effect on instrument access, irrigation penetration, and disease clearance
    Govindaraju R, Cherian L, Macias-Valle L, Murphy J, Gouzos M, Vreugde S, et al.
    Int Forum Allergy Rhinol, 2019 10;9(10):1097-1104.
    PMID: 31343852 DOI: 10.1002/alr.22397
    BACKGROUND: Middle meatal antrostomy (MMA) provides limited access to the anteromedial and inferior aspect of the maxillary sinus (MS) often resulting in residual disease and inflammatory burden. Newer extended procedures, such as mega-antrostomy (Mega-A) and extended modified mega-antrostomy (EMMA), have been developed to address this limitation. This study assesses the effect of varying extent of MS surgery on irrigation penetration and access of instrumentation.

    METHODS: The MS of 5 fresh-frozen cadavers were sequentially dissected. Irrigation was evaluated with a squeeze bottle (SB) in different head positions and using different volumes of fluid. Surgical reach and visualization were examined using common sinus instruments and different angled endoscopes. A disease simulation was also performed to check for residual debris after instrumentation and irrigations.

    RESULTS: Irrigation penetration improved as antrostomy size increased (p < 0.0001), with a significant difference observed between the extended procedures and MMA. The effect of the volume was significant for SB (p < 0.0001) but head positions appeared irrelevant (p = 0.613). Overall visualization improved for Mega-A and EMMA. A similar trend was seen for the reach of the instruments to all sinus wall subsites. EMMA facilitated the most removal of "sinus disease" in the disease simulation model when compared with both MMA and Mega-A, due to its reach of the anteroinferior aspects of the maxillary sinus.

    CONCLUSIONS: High-volume irrigation using SB achieved good sinus penetration, irrespective of head position. Extended MS procedures appear to further increase irrigation penetration as well as surgical access.

    Matched MeSH terms: Cadaver
  20. Fulltext Femoral articular geometry and patellofemoral stability
    Iranpour F, Merican AM, Teo SH, Cobb JP, Amis AA
    Knee, 2017 Jun;24(3):555-563.
    PMID: 28330756 DOI: 10.1016/j.knee.2017.01.011
    BACKGROUND: Patellofemoral instability is a major cause of anterior knee pain. The aim of this study was to examine how the medial and lateral stability of the patellofemoral joint in the normal knee changes with knee flexion and measure its relationship to differences in femoral trochlear geometry.

    METHODS: Twelve fresh-frozen cadaveric knees were used. Five components of the quadriceps and the iliotibial band were loaded physiologically with 175N and 30N, respectively. The force required to displace the patella 10mm laterally and medially at 0°, 20°, 30°, 60° and 90° knee flexion was measured. Patellofemoral contact points at these knee flexion angles were marked. The trochlea cartilage geometry at these flexion angles was visualized by Computed Tomography imaging of the femora in air with no overlying tissue. The sulcus, medial and lateral facet angles were measured. The facet angles were measured relative to the posterior condylar datum.

    RESULTS: The lateral facet slope decreased progressively with flexion from 23°±3° (mean±S.D.) at 0° to 17±5° at 90°. While the medial facet angle increased progressively from 8°±8° to 36°±9° between 0° and 90°. Patellar lateral stability varied from 96±22N at 0°, to 77±23N at 20°, then to 101±27N at 90° knee flexion. Medial stability varied from 74±20N at 0° to 170±21N at 90°. There were significant correlations between the sulcus angle and the medial facet angle with medial stability (r=0.78, p<0.0001).

    CONCLUSIONS: These results provide objective evidence relating the changes of femoral profile geometry with knee flexion to patellofemoral stability.

    Matched MeSH terms: Cadaver
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links