HyperDSC™(fast scan rate) was used to study the melting behavior of canola (CLO), sunflower (SFO), palm olein (PO), rice bran oils (RBO), and cocoa butter (CB), and was compared to the melting behaviors using conventional DSC. There was an increase in sensitivity with increase in scan rate. Slow scan rate (5 to 20C/min) gave low sensitivity, which increased when the scan rates were increased to 50, 100 and 200C/min. Peak resolution was affected by scan rate depending on the sample weight. Increase in the size of sample coupled with the use of fast scan rate decreased the peak resolution. Generally small sample sizes gave better peak resolution. Results of the effect of scan rate on glass transition (Tg) shows that Tg, which is a weak transition especially in crystalline and low amorphous materials was not detected using conventional scan rates (5 to 20oC/min). It was however detected using of hyperDSC™ scan rates (100 to 200oC/min). Increasing the scan rate resulted in an increase in the peak temperature and the elimination of shoulder peaks, which were caused due to the polymorphic behavior of the triacylglycerols in the oils. The increase in peak temperature caused a shift in the peak position towards a higher temperature value. There is a positive correlation between the peak temperature and scan rate. The correlation coefficients (r) for CLO, SFO, PO, RBO and CB were 0.96, 0.95, 0.97, 0.96 and 0.96 respectively.
Cardiovascular disease (CVD) is a major cause of disability and premature death throughout the world. This disease is commonly experienced by people with unhealthy lifestyle, stress and physical inactivity. Cholesterol has received the most attention as single risk factor of CVD. Reducing the intake of cholesterol, saturated fat, and trans faty acids may be beneficial, yet controversy is still lingering to what constituents more beneficial dietary fats. The purpose of this article is to give an overview on the impact of major dietary fatty acids on cardiovascular morbidity and mortality and to give an insightful information regarding fatty acids composition in selected fruits oils in search for novel oils as potential therapy against CVD.
This review of literature provides an overview on the compositional data of Rambutan (Nephelium lappaceum Linn.) and rambutan seed fat for usage in chocolate product. It is a seasonal fruit native of west Malaysia and Sumatra. It is harvested when the fruit have reached optimum visual and organoleptic quality. Rambutans rapidly deteriorate unless proper handling techniques are employed. The rambutan fruits are deseeded during processing and these seeds (~ 4-9 g/100 g) are a waste by-product of the canning industry. And some studies was showed that rambutan seed possesses a relatively high amount of fat and these fats are similar to those of cocoa fat, although have some different physical properties. In the present research about rambutan seed fat continued increasing due to from previous research was found that this fat can use as substitute in cocoa butter for chocolate products. Therefore, the extracted fat from rambutan seed not only could be used for manufacturing candles, soaps, and fuels, but it also has a possible to be a source of natural edible fat with feasible industry use.
Impacts and relationships on physicochemical properties in dark chocolate produced from different substitution for cocoa butter by Xanthan gum (XG) and Guar gum (GG) blends were determined using D-optimal mixture design. This study involved three levels of substitution which are 5%, 10% and 15% with constrained cocoa butter content and random blend of gums. Linear design models were applied to analyze parameters including texture (hardness) measurement and melting profile of fat crystal. Products experienced undesirable raises of hardness jointly with the increment of gums incorporation across the level of cocoa butter replacement from 5% to 15%. Similar trend was also agreed with the melting behavior of products as their melting point increased with the gradual diminution of cocoa butter. After all, the replacement of cocoa butter using hydrocolloids was deemed possible as there were products whose melting point and hardness fell in the acceptable range.
Cocoa beans are rich in numbers of beneficial bioactive compounds such as phenolics and
phytosterols, which benefits to human being. The suitable extraction method is needed to
produce high quality and quantity of cocoa butter and other bioactive compounds. There are
many extraction method to extract these compounds such as Soxhlet extraction, supercritical
fluid extraction, ultrasound extraction method and others. The objective of this study is to
determine the effectiveness of the different extraction methods producing high yields of cocoa
butter, lower oxidative value, stable phytosterols and antioxidant content. The cocoa beans were
subjected to different extraction methods such as Soxhlet extraction (SE), Ultrasonic extraction
method (USE), Supercritical carbon dioxide (SCO2
) and Supercritical carbon dioxide with cosolvent
(SCO2
-Ethanol). Cocoa butter extracted using SCO2
-Ethanol has significantly (p
This research was done to evaluate the effect of a commercial exogenous emulsifier
(polyethylene glycol ricinoleate (PEGR)) with high hydrophilic-to-lipophilic balance (HLB)
supplementation to broiler chicken diets on growth performance, digestibility of fat and
apparent metabolisable energy (AME) content in week 1, 3 and 5. A total of 360 one-day-old
male Cobb broiler chicks were assigned in groups of 30 to 12 battery cages. The chicks were
randomly assigned to two dietary treatments, with 6 replicate cages per treatment. The diets
were either standard broiler starter and finisher, with rice bran oil (RBO) as supplemented fat
source or similar diets + 0.05% emulsifier (RBOV). Feed intakes of RBOV groups significantly
increased compared to those of RBO groups from week 2 till 4 while body weights of RBOV
diets significantly increased in week 4 and 5. Both RBOV and RBO groups had similar FCR
except for week 5. Addition of this strongly hydrophilic emulsifier showed no significant
difference in fat digestibility of both RC and RV groups but higher AME was noted for the
treatment than for the control groups at week 5. Therefore, supplementing the exogenous
emulsifier into a broiler diet enriched with rice bran oil improved body weight and AME
content at week 5 with minimal effect on fat digestibility.
Obesity plays a pivotal role in the development of low-grade inflammation. Dietary fatty acids are important modulators of inflammatory responses. Saturated fatty acids (SFA) and n-6 polyunsaturated fatty acids (PUFA) have been reported to exert pro-inflammatory effects. n-3 PUFA in particular, possess anti-inflammatory properties. Numerous clinical studies have been conducted over decades to investigate the impact of dietary fatty acids on inflammatory response in obese individuals, however the findings remained uncertain. High fat meals have been reported to increase pro-inflammatory responses, however there is limited evidence to support the role of individual dietary fatty acids in a postprandial state. Evidence in chronic studies is contradictory, the effects of individual dietary fatty acids deserves further attention. Weight loss rather than n-3 PUFA supplementation may play a more prominent role in alleviating low grade inflammation. In this context, the present review provides an update on the mechanistic insight and the influence of dietary fats on low grade inflammation, based on clinical evidence from acute and chronic clinical studies in obese and overweight individuals.
The blending effects of mango seed fat (MSF), extracted using supercritical fluid, and palm stearin (PS) to formulate hard cocoa butter replacers (CBRs), were investigated. The triglycerides (TG), thermal properties and solid fat content (SFC) of the formulated blends were determined using different chromatographic and thermal techniques. All the blends had three main TGs; namely, 1,3-dipalmitoyl-2-oleoylglycerol (POP) (8.6-17.7%), 1-palmitoyl-2-oleoyl-3-stearoyl-glycerol (POS) (12.6-19.6%), and 1,3-distearoyl-2-oleoyl-glycerol (SOS) (37.2-31.4%), with SOS being the major component. The melting peak temperatures gradually increased and shifted towards higher temperatures with PS. The crystallization onset temperatures increased, while the offset decreased with PS. The SFC did not drop to 0% at 37.5°C, which was shifted to 0% at and above 40°C for some blends. The studies revealed that CBRs could be prepared by blending MSF and PS, and they could be utilised by chocolate manufacturers in tropical countries.
A study was conducted to differentiate lard, chicken fat, beef fat and mutton fat using Gas Chromatography Mass Spectrometry (GC-MS) and Elemental Analyzer-Isotope Ratio Mass Spectrometry (EA-IRMS). The comparison of overall fatty acid data showed that lard and chicken fat share common characteristics by having palmitic, oleic and linoleic acid as major fatty acids while beef and mutton fats shared common characteristics by possessing palmitic, stearic and oleic acid as major fatty acids. The direct comparisons among the fatty acid data, therefore, may not be suitable for discrimination of different animal fats. When the fatty acid distributional data was subjected to Principle Component Analysis (PCA), it was demonstrated that stearic, oleic and linoleic acids as the most discriminating parameters in the clustering of animal fats into four subclasses. The bulk carbon analysis of animal fats using EA-IRMS showed that determination of the carbon isotope ratios (δ¹³C) would be a good indicator for discriminating lard, chicken fat, beef fat and mutton fat. This would lead to a faster and more efficient method to ascertain the source of origin of fats used in food products.
Medium- and long-chain triacylglycerol (MLCT) is a modified lipid containing medium- chain (C6-C12) and long-chain fatty acids (C14-C24) in the same triacylglycerol (TAG) molecule. It can be produced either through enzymatic (with 1,3 specific or nonspecific enzyme) or chemical methods. The specialty of this structured lipid is that it is metabolized differently compared to conventional fats and oils, which can lead to a reduction of fat accumulation in the body. Therefore, it can be used for obesity management. It also contains nutritional properties that can be used to treat metabolic problems. This review will discuss on the health benefits of MLCT, its production methods especially via enzymatic processes and its applications in food industries.
Sponge cake prepared by partial substitution of wheat flour with mango pulp and mango peel flours (MPuF and MPeF, respectively) at different concentrations (control, 5%, 10%, 20% or 30%) were investigated for the physico-chemical, nutritional and organoleptic characteristics. Results showed sponge cake incorporated with MPuF and MPeF to have high dietary fiber with low fat, calorie, hydrolysis and predicted glycemic index compared with the control. Increasing the levels of MPuF and MPeF in sponge cake had significant impact on the volume, firmness and color. Sensory evaluation showed sponge cake formulated with 10% MPuF and 10% MPeF to be the most acceptable. MPeF and MPuF have high potential as fiber-rich ingredients and can be utilized in the preparation of cake and other bakery products to improve the nutritional qualities.
The ability of palm oil (PO) to crystallize as beta prime polymorph has made it an attractive option for the production of margarine fat (MF). Palm stearin (PS) expresses similar crystallization behavior and is considered one of the best substitutes of hydrogenated oils due to its capability to impart the required level of plasticity and body to the finished product. Normally, PS is blended with PO to reduce the melting point at body temperature (37 °C). Lipid phase, formulated by PO and PS in different ratios were subjected to an emulsification process and the following analyses were done: triacylglycerols, solid fat content (SFC), and thermal behavior. In addition, the microstructure properties, including size and number of crystals, were determined for experimental MFs (EMFs) and commercial MFs (CMFs). Results showed that blending and emulsification at PS levels over 40 wt% significantly changed the physicochemical and microstructure properties of EMF as compared to CMF, resulting in a desirable dipalmitoyl-oleoyl-glycerol content of less than 36.1%. SFC at 37 °C, crystal size, crystal number, crystallization, and melting enthalpies (ΔH) were 15%, 5.37 μm, 1425 crystal/μm(2), 17.25 J/g, and 57.69J/g, respectively. All data reported indicate that the formation of granular crystals in MFs was dominated by high-melting triacylglycerol namely dipalmitoyl-oleoyl-glycerol, while the small dose of monoacylglycerol that is used as emulsifier slowed crystallization rate. Practical Application: Most of the past studies were focused on thermal behavior of edible oils and some blends of oils and fats. The crystallization of oils and fats are well documented but there is scarce information concerning some mechanism related to crystallization and emulsification. Therefore, this study will help to gather information on the behavior of emulsifier on crystallization regime; also the dominating TAG responsible for primary granular crystal formations, as well as to determine the best level of stearin to impart the required microstructure properties and body to the finished products.
The incidence of depression is expected to increase over the next 20 years, and many people will have to deal with it. It has been reported that up to 40% of university students experience levels of depression. Several negative consequences are associated with depression symptoms, such as memory impairment, suicide, and substance abuse. Recently, researchers have been studying possible associations between depression and polyunsaturated fatty acids (PUFAs), which may modify depression symptoms. The aim of the present study was to find an association between PUFA levels and depression among Iranian postgraduate students in Malaysia.
The nutritional properties of surimi-like materials produced from spent duck meat processed conventionally (CDS) and processed with acid and alkaline solubilization (ACDS and ALDS, respectively) were studied. The essential amino acids (EAAs) content was significantly higher (p
Diacylglycerol (DAG), which has health-enhancing properties, is sometimes added to bakery shortening to produce baked products with enhanced physical functionality. Nevertheless, the quantity present is often too little to exert any positive healthful effects. This research aimed to produce bakery shortenings containing significant amounts of palm diacyglycerol (PDG). Physicochemical, textural and viscoelastic properties of the PDG bakery shortenings during 3 months storage were evaluated and compared with those of commercial bakery shortening (CS).
The authentication of food products from the presence of non-allowed components for certain religion like lard is very important. In this study, we used proton Nuclear Magnetic Resonance ((1)H-NMR) spectroscopy for the analysis of butter adulterated with lard by simultaneously quantification of all proton bearing compounds, and consequently all relevant sample classes. Since the spectra obtained were too complex to be analyzed visually by the naked eyes, the classification of spectra was carried out.The multivariate calibration of partial least square (PLS) regression was used for modelling the relationship between actual value of lard and predicted value. The model yielded a highest regression coefficient (R(2)) of 0.998 and the lowest root mean square error calibration (RMSEC) of 0.0091% and root mean square error prediction (RMSEP) of 0.0090, respectively. Cross validation testing evaluates the predictive power of the model. PLS model was shown as good models as the intercept of R(2)Y and Q(2)Y were 0.0853 and -0.309, respectively.
In this paper, a comprehensive study has been made on the detection of free fatty acids (FFAs) in palm oil via an optical technique based on enzymatic aminolysis reactions. FFAs in crude palm oil (CPO) were converted into fatty hydroxamic acids (FHAs) in a biphasic lipid/aqueous medium in the presence of immobilized lipase. The colored compound formed after complexation between FHA and vanadium (V) ion solution was proportional to the FFA content in the CPO samples and was analyzed using a spectrophotometric method. In order to develop a rapid detection system, the parameters involved in the aminolysis process were studied. The utilization of immobilized lipase as catalyst during the aminolysis process offers simplicity in the product isolation and the possibility of conducting the process under extreme reaction conditions. A good agreement was found between the developed method using immobilized Thermomyces lanuginose lipase as catalyst for the aminolysis process and the Malaysian Palm Oil Board (MPOB) standard titration method (R2 = 0.9453).
A rapid and direct liquid chromatographic (LC) technique is described for the determination of a eutectic mixture of diphenyl oxide and biphenyl such as Dowtherm A thermal heating fluid (THF) in oleochemicals and palm olein. Analysis is performed with an RP-18 column with fluorescence detection (excitation at 247 nm and emission at 310 nm). The isocratic mobile phase (1.0 mL/min) consists of methanol and water (90 + 10, v/v). A linear calibration model (correlation coefficient = 0.9999) was developed directly from used Dowtherm A THF with the biphenyl peak (4.70 min) as a marker. Average recoveries from spiked glycerin, fatty alcohol mixture, methyl ester mixture, fatty acids, and palm olein were 90.9-108.7%, with a detection limit of 0.1 microgram/mL. The technique requires no prior sample cleanup nor extraction steps and is good for quality assurance purposes.