Displaying publications 41 - 60 of 145 in total

Abstract:
Sort:
  1. Masir N, Ghoddoosi M, Mansor S, Abdul-Rahman F, Florence CS, Mohamed-Ismail NA, et al.
    Histopathology, 2012 Apr;60(5):804-15.
    PMID: 22320393 DOI: 10.1111/j.1365-2559.2011.04127.x
    To investigate RCL2 as a fixative for tissue fixation in routine histopathological examination and to assess tissue suitability for ancillary investigations.
    Matched MeSH terms: Formaldehyde*
  2. Jie Y, Ismail NH, Jie X, Isa ZM
    J Formos Med Assoc, 2011 Sep;110(9):555-63.
    PMID: 21930065 DOI: 10.1016/j.jfma.2011.07.003
    This review summarizes the results of epidemiological studies focusing on the detrimental effects of home environmental factors on asthma morbidity in adults. We reviewed the literature on indoor air quality (IAQ), physical and sociodemographic factors, and asthma morbidity in homes, and identified commonly reported asthma, allergic, and respiratory symptoms involving the home environment. Reported IAQ and asthma morbidity data strongly indicated positive associations between indoor air pollution and adverse health effects in most studies. Indoor factors most consistently associated with asthma and asthma-related symptoms in adults included fuel combustion, mold growth, and environmental tobacco smoke. Environmental exposure may increase an adult's risk of developing asthma and also may increase the risk of asthma exacerbations. Evaluation of present IAQ levels, exposure characteristics, and the role of exposure to these factors in relation to asthma morbidity is important for improving our understanding, identifying the burden, and for developing and implementing interventions aimed at reducing asthma morbidity.
    Matched MeSH terms: Formaldehyde/adverse effects
  3. Khalid S, Shaik Mossadeq WM, Israf DA, Hashim P, Rejab S, Shaberi AM, et al.
    Med Princ Pract, 2010;19(4):255-9.
    PMID: 20516700 DOI: 10.1159/000312710
    To study the effects of Tamarindus indica L. aqueous fruit extract on the antinociceptive activities in rodent models.
    Matched MeSH terms: Formaldehyde/adverse effects
  4. Ong KC, Devi S, Cardosa MJ, Wong KT
    J Virol, 2010 Jan;84(1):661-5.
    PMID: 19864378 DOI: 10.1128/JVI.00999-09
    Enterovirus 71 (EV71) causes childhood hand, foot, and mouth disease and neurological complications, and no vaccines or therapeutic drugs are currently available. Formaldehyde-inactivated whole-virus vaccines derived from EV71 clinical isolates and a mouse-adapted virus (MAV) were tested in a mouse model of EV71 encephalomyelitis. After only two immunizations, given to mice at 1 and 7 days of age, the MAV vaccine protected mice at 14 days of age from disease. Tissues from immunized mice were negative for virus by viral culture, reverse transcriptase PCR, immunohistochemistry analysis, and in situ hybridization. Cross-neutralizing EV71 antibodies to strains with genotypes B3, B4, and C1 to C5 generated in immunized adult mice were able to passively protect 14-day-old mice from disease.
    Matched MeSH terms: Formaldehyde/pharmacology
  5. Kuan YH, Bhat R, Senan C, Williams PA, Karim AA
    J Agric Food Chem, 2009 Oct 14;57(19):9154-9.
    PMID: 19757813 DOI: 10.1021/jf9015625
    The impact of ultraviolet (UV) irradiation on the physicochemical and functional properties of gum arabic was investigated. Gum arabic samples were exposed to UV irradiation for 30, 60, 90, and 120 min; gum arabic was also treated with formaldehyde for comparison. Molecular weight analysis using gel permeation chromatography indicated that no significant changes occurred on the molecular structure on the samples exposed to UV irradiation. Free amino group analysis indicated that mild UV irradiation (30 min) could induce cross-linking on gum arabic; this result was comparable with that of samples treated with formaldehyde. However, viscosity break down was observed for samples exposed to UV irradiation for longer times (90 and 120 min). All irradiated and formaldehyde-treated samples exhibited better emulsification properties than unirradiated samples. These results indicate that UV-irradiated gum arabic could be a better emulsifier than the native (unmodified) gum arabic and could be exploited commercially.
    Matched MeSH terms: Formaldehyde/pharmacology
  6. Yeap BH, Muniandy S, Lee SK, Sabaratnam S, Singh M
    Asian J Surg, 2007 Jul;30(3):183-7.
    PMID: 17638637
    The determination of tumour-free margin in breast cancer is crucial in deciding subsequent patient management. To exemplify the phenomenon of margin contraction during specimen preparation for histopathological analysis, we quantified the shrinkage of breast specimens as a result of formalin fixation.
    Matched MeSH terms: Formaldehyde/pharmacology
  7. Yeong YS, Nazni WA, Santana RL, Mohd Noor I, Lee HL, Mohd Sofian A
    Trop Biomed, 2011 Aug;28(2):325-32.
    PMID: 22041752
    In Malaysia, maggot debridement therapy (MDT) utilizes maggots of Lucilia cuprina (Wiedemann) to debride necrotic tissue from wound surface, reduce bacterial infection and therefore, enhance wound healing process. To evaluate the sterility of the sterile maggots produced after sterilization process before delivering onto patient wounds. Sterility of sterile maggots is crucial in ensuring the safe usage of MDT and patient's health. Eggs of L. cuprina collected from a laboratory colony were divided into treated group (sterilized) and control group (non-sterilized). Treated group underwent sterilization while eggs from control group were allowed to hatch without sterilization. Sodium hypochlorite and formaldehyde were the main disinfectants used in this sterilization process. Scanning electron microscope (SEM) was used to examine and ascertain the sterility of sterile maggots. SEM results showed that all sterilized L. cuprina eggs and maggots achieved sterility and all were cleared from bacterial contamination. In contrast, all non-sterilized eggs and maggots were found to be colonized by microorganisms. Sterilization method employed to sterilize eggs and maggots used in Malaysia MDT was proven successful and MDT is safe to be used as wound management tools.
    Matched MeSH terms: Formaldehyde/toxicity
  8. Chong LE, Jow TK
    Dent J Malaysia Singapore, 1967 Oct;7(2):44-51.
    PMID: 5247441
    Matched MeSH terms: Formaldehyde/therapeutic use
  9. Liu W, Zhang J, Hashim JH, Jalaludin J, Hashim Z, Goldstein BD
    Environ Health Perspect, 2003 Sep;111(12):1454-60.
    PMID: 12948883
    Burning mosquito coils indoors generates smoke that can control mosquitoes effectively. This practice is currently used in numerous households in Asia, Africa, and South America. However, the smoke may contain pollutants of health concern. We conducted the present study to characterize the emissions from four common brands of mosquito coils from China and two common brands from Malaysia. We used mass balance equations to determine emission rates of fine particles (particulate matter < 2.5 microm in diameter; PM(2.5)), polycyclic aromatic hydrocarbons (PAHs), aldehydes, and ketones. Having applied these measured emission rates to predict indoor concentrations under realistic room conditions, we found that pollutant concentrations resulting from burning mosquito coils could substantially exceed health-based air quality standards or guidelines. Under the same combustion conditions, the tested Malaysian mosquito coils generated more measured pollutants than did the tested Chinese mosquito coils. We also identified a large suite of volatile organic compounds, including carcinogens and suspected carcinogens, in the coil smoke. In a set of experiments conducted in a room, we examined the size distribution of particulate matter contained in the coil smoke and found that the particles were ultrafine and fine. The findings from the present study suggest that exposure to the smoke of mosquito coils similar to the tested ones can pose significant acute and chronic health risks. For example, burning one mosquito coil would release the same amount of PM(2.5) mass as burning 75-137 cigarettes. The emission of formaldehyde from burning one coil can be as high as that released from burning 51 cigarettes.
    Matched MeSH terms: Formaldehyde/analysis
  10. Mabruk MJ
    Expert Rev Mol Diagn, 2004 Sep;4(5):653-61.
    PMID: 15347259
    In situ hybridization is a method for detecting specific nucleic acid sequences within individual cells. This technique permits visualization of viral nucleic acid or gene expression in individual cells within their histologic context. In situ hybridization is based on the complementary binding of a labeled nucleic acid probe to complementary sequences in cells or tissue sections, followed by visualization of target sequences within the cells. It has been used widely for the detection of viral nucleic acid sequences within individual cells. This review will define the technical approaches of in situ hybridization and its current application to detect viral nucleic acids within formalin-fixed, paraffin-embedded tissue samples, with special reference to the Epstein-Barr virus.
    Matched MeSH terms: Formaldehyde/chemistry*
  11. Mustaffa F, Indurkar J, Ismail S, Mordi MN, Ramanathan S, Mansor SM
    Pharmacognosy Res, 2010 Mar;2(2):76-81.
    PMID: 21808545 DOI: 10.4103/0974-8490.62952
    Cinnomomum iners standardized leaves methanolic extract (CSLE) was subjected to analgesic, toxicity and phytochemical studies. The analgesic activity of CSLE was evaluated using formalin, hot plate and tail flick tests at doses of 100, 200 and 500 mg/kg. CSLE showed significant activity (P < 0.05) in the formalin model (late phase) on the rats at doses of 200 and 500 mg/kg. However, CSLE did not show activity in the hot plate and tail flick tests. The results obtained suggest that CSLE acts peripherally to relieve pain. For the toxicity study, CSLE was orally administered to the Swiss albino mice according to the Organization for Economic Co-Operation and Development (OECD) guideline 423. There was no lethality or toxic symptoms observed for all the tested doses throughout the 14-day period. Phytochemical screening of CSLE showed the presence of cardiac glycoside, flavonoid, polyphenol, saponin, sugar, tannin and terpenoid.
    Matched MeSH terms: Formaldehyde
  12. Guo HF, Mohd Ali R, Abd Hamid R, Chang SK, Zainal Z, Khaza'ai H
    Int J Burns Trauma, 2020;10(5):218-224.
    PMID: 33224609
    Burns are injuries on the skin or other tissues. Burns are divided into superficial, partial, and full-thickness, characterized by the depth of the affected tissues. Histological analysis is critical to assess the burn wound healing process. Thus, a systematic evaluation system is imperative for burn research. In the present study, a total of thirty Sprague-Dawley rats were randomly divided into five groups. Deep partial-thickness burn wound was induced on the dorsal part of the rats. Six animals from each group were sacrificed on the 3rd, 7th, 11th, 14th and 21st day post-burn, respectively. Half of the wound tissue was immediately fixed in buffered neutral formalin for hematoxylin & eosin staining. The healing of the epidermis was evaluated with scores ranging from 0 to 7 based on the state of crust on wound surface, the degree of epithelialization as well as the formation of rete ridges. Meanwhile, healing of the dermis was also evaluated with scores ranging from 0 to 7 according to the proportion of adipose cells, inflammatory cells and fibroblasts, the state of collagen deposition as well as the formation of hair follicles. Furthermore, temporal changes of histological score of epidermis and dermis in the skin tissue with deep partial-thickness burn was evaluated. In conclusion, a new comprehensive system for assessing microscopic changes in the healing process of deep partial-thickness burn wound in hematoxylin & eosin staining slides was established, which simplified the scoring process and helped to obtain reproducible and accurate results in the burn study.
    Matched MeSH terms: Formaldehyde
  13. Zadeh-Ardabili PM, Rad SK
    Biotechnol Rep (Amst), 2019 Jun;22:e00341.
    PMID: 31061816 DOI: 10.1016/j.btre.2019.e00341
    Although inflammation is a reactive to injurious stimuli and considered as beneficial process in body, but it causes some discomforts, such as pain. Murine dietary contains appreciable amounts of fatty acids and antioxidants which encourages researchers to focus on their potential therapeutic effects. This study is aimed to examine the analgesic and anti-inflammatory activity of Neptune krill oil (NKO) and fish oil (FO) in rodent model which are two well-known sources of rich content of n-3 polyunsaturated fatty acids (n-3 PUFAs), mostly eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA). NKO and FO were used at the same dose of 500 mg and also balanced at similar doses of EPA: 12 in NKO vs. 12 in FO wt%, DHA: 7 NKO vs. 8 FO wt%. Application of NKO and FO in acetic acid-induced writhing effect, hot plate, and formalin induced test, indicated the nociceptive activity of the two tested drugs in comparison with normal saline. Also, the anti-inflammatory effect of these supplements was confirmed by carrageenan test. Analysis of cytokines levels in the blood samples of the mice after induction inflammation by carrageenan indicated decreased levels of those proteins compared to that in the normal groups. Both tested drugs, effectively could reduce severe inflammation and pain in rodents in comparison with the references drugs (depends on the tests); however, NKO was found to be more effective.
    Matched MeSH terms: Formaldehyde
  14. Abu Bakar NA, Sulaiman MR, Lajis N, Akhtar MN, Mohamad AS
    J Pharm Bioallied Sci, 2020 Nov;12(Suppl 2):S711-S717.
    PMID: 33828366 DOI: 10.4103/jpbs.JPBS_344_19
    Introduction: Pain is a major global health issue, where its pharmacotherapy prompts unwanted side effects; hence, the development of effective alternative compounds from natural derivatives with lesser side effects is clinically needed. Chalcone; the precursors of flavonoid, and its derivatives have been widely investigated due to its pharmacological properties.

    Objective: This study addressed the therapeutic effect of 3-(2,5-dimethoxyphenyl)-1-(5-methyl furan-2-yl) prop-2-en-1-one (DMPF-1); synthetic chalcone derivative, on antinociceptive activity in vivo.

    Materials and Methods: The antinociceptive profile was evaluated using acetic-acid-induced abdominal writhing, hot plate, and formalin-induced paw licking test. Capsaicin, phorbol 12-myristate 12 acetate (PMA), and glutamate-induced paw licking test were carried out to evaluate their potential effects toward different targets.

    Results: It was shown that the doses of 0.1, 0.5, 1, and 5 mg/kg of DMPF-1 given via intraperitoneal injection showed significant reduction in writhing responses and increased the latency time in hot-plate test where reduced time spent on licking the injected paw in formalin and dose contingency inhibition was observed. The similar results were observed in capsaicin, PMA, and glutamate-induced paw licking test. In addition, the challenge with nonselective opioid receptor antagonist (naloxone) aimed to evaluate the involvement of the opioidergic system, which showed no reversion in analgesic profile in formalin and hot-plate test.

    Conclusion: Collectively, this study showed that DMPF-1 markedly inhibits both peripheral and central nociception through the mechanism involving an interaction with vanilloid and glutamatergic system regardless of the activation of the opioidergic system.

    Matched MeSH terms: Formaldehyde
  15. Yue X, Ma NL, Sonne C, Guan R, Lam SS, Van Le Q, et al.
    J Hazard Mater, 2021 03 05;405:124138.
    PMID: 33092884 DOI: 10.1016/j.jhazmat.2020.124138
    Indoor air pollution with toxic volatile organic compounds (VOCs) and fine particulate matter (PM2.5) is a threat to human health, causing cancer, leukemia, fetal malformation, and abortion. Therefore, the development of technologies to mitigate indoor air pollution is important to avoid adverse effects. Adsorption and photocatalytic oxidation are the current approaches for the removal of VOCs and PM2.5 with high efficiency. In this review we focus on the recent development of indoor air pollution mitigation materials based on adsorption and photocatalytic decomposition. First, we review on the primary indoor air pollutants including formaldehyde, benzene compounds, PM2.5, flame retardants, and plasticizer: Next, the recent advances in the use of adsorption materials including traditional biochar and MOF (metal-organic frameworks) as the new emerging porous materials for VOCs absorption is reviewed. We review the mechanism for mitigation of VOCs using biochar (noncarbonized organic matter partition and adsorption) and MOF together with parameters that affect indoor air pollution removal efficiency based on current mitigation approaches including the mitigation of VOCs using photocatalytic oxidation. Finally, we bring forward perspectives and directions for the development of indoor air mitigation technologies.
    Matched MeSH terms: Formaldehyde
  16. Wan Mansor WN, Abdullah S, Jarkoni MNK, Vaughn JS, Olsen DB
    Data Brief, 2020 Dec;33:106580.
    PMID: 33304969 DOI: 10.1016/j.dib.2020.106580
    A diesel engine has been a desirable machine due to its better fuel efficiency, reliability, and higher power output. It is widely used in transportations, locomotives, power generation, and industrial applications. The combustion of diesel fuel emits harmful emissions such as unburned hydrocarbons (HC), particulate matter (PM), nitrogen oxides (NOx), and carbon monoxides (CO). This article presents data on the efficiency, combustion, and emission of a 4-stroke diesel engine. The engine is a 6.8 L turbocharged 6-cylinder Tier II diesel engine fitted with a common rail injection system. The test was carried out at the Powerhouse Energy Campus, Colorado State University Engines and Energy Conversion facility. The ISO Standard 8178:4 Cycle D2 cycle was adopted for this study consists of five test runs at 1800 rpm. During the testing, CO, carbon dioxide (CO2), oxygen (O2), NOx, PM, unburned HC as a total HC (THC), methane (CH4), formaldehyde (CH2O), and volatile organic compound (VOC) emissions were measured. At the same time, the data acquisition system recorded the combustion data. The engine's performance is characterized by the brake specific fuel combustion (BSFC) and thermal efficiency. A dataset of correlations among the parameters was also presented in this article.
    Matched MeSH terms: Formaldehyde
  17. Abu Nor N, Zamri-Saad M, Md Yasin IS, Salleh A, Mustaffa-Kamal F, Matori MF, et al.
    Vaccines (Basel), 2020 Dec 04;8(4).
    PMID: 33291587 DOI: 10.3390/vaccines8040734
    Vibrio harveyi causes vibriosis in various commercial marine fish species. The infection leads to significant economic losses for aquaculture farms, and vaccination is an alternative approach for the prevention and control of fish diseases for aquaculture sustainability. This study describes the use of formalin-killed Vibrio harveyi (FKVh) strain Vh1 as a vaccine candidate to stimulate innate and adaptive immunities against vibriosis in a marine red hybrid tilapia model. Tilapia are fast growing; cheap; resistant to diseases; and tolerant to adverse environmental conditions of fresh water, brackish water, and marine water and because of these advantages, marine red hybrid tilapia is a suitable candidate as a model to study fish diseases and vaccinations against vibriosis. A total of 180 healthy red hybrid tilapias were gradually adapted to the marine environment before being divided into two groups, with 90 fish in each group and were kept in triplicate with 30 fish per tank. Group 1 was vaccinated intraperitoneally with 100 µL of FKVh on week 0, and a booster dose was similarly administered on week 2. Group 2 was similarly injected with PBS. Skin mucus, serum, and gut lavage were collected weekly for enzyme-linked immunosorbent assay (ELISA) and a lysozyme activity assay from a total of 30 fish of each group. On week 4, the remaining 60 fish of Groups 1 and 2 were challenged with 108 cfu/fish of live Vibrio harveyi. The clinical signs were monitored while the survival rate was recorded for 48 h post-challenge. Vaccination with FKVh resulted in a significantly (p < 0.05) higher rate of survival (87%) compared to the control (20%). The IgM antibody titer and lysozyme activities of Group 1 were significantly (p < 0.05) higher than the unvaccinated Groups 2 in most weeks throughout the experiment. Therefore, the intraperitoneal exposure of marine red hybrid tilapia to killed V. harveyi enhanced the resistance and antibody response of the fish against vibriosis.
    Matched MeSH terms: Formaldehyde
  18. Gao P, Mohd Noor NQI, Md Shaarani S
    PMID: 33356490 DOI: 10.1080/10408398.2020.1866490
    Food safety issues associated with aquatic food products become more important with the increasing consumption and followed by its ongoing challenges. The objective of this paper is to review the food safety hazards and health risks related to aquatic food products for the Southeast Asian region. These hazards can be categorized as microplastics (MPs) hazard, biological hazards (pathogenic bacteria, biogenic amines, viruses, parasites), and chemical hazards (antimicrobial, formaldehyde, heavy metal). In different Southeast Asian countries, the potential health risks of aquatic food products brought by food hazards to consumers were at different intensity and classes. Among all these hazards, pathogenic bacteria, antimicrobials, and heavy metal were a particular concern in the Southeast Asian region. With environmental changes, evolving consumption patterns, and the globalization of trade, new food safety challenges are created, which put forward higher requirements on food technologies, food safety regulations, and international cooperation.
    Matched MeSH terms: Formaldehyde
  19. Asmilia N, Aliza D, Fahrimal Y, Abrar M, Ashary S
    Vet World, 2020 Jul;13(7):1457-1461.
    PMID: 32848324 DOI: 10.14202/vetworld.2020.1457-1461
    Background and Aim: Although existing research confirms the antiparasitic effect of the Malacca plant against Plasmodium, its effect on the liver, one of the target organs of Plasmodium has not been investigated. Therefore, this study was conducted to explore the potential of the ethanolic extract of Malacca (Phyllanthus emblica) leaves in preventing liver damage in mice (Mus musculus) caused by Plasmodium berghei infection.

    Materials and Methods: This study was conducted using the livers of 18 mice fixed in 10% neutral-buffered formalin. A completely randomized design with a unidirectional pattern comprising six treatments was used in this study, with each treatment consisting of three replications. Treatment 0 was the negative control group infected with P. berghei, treatment 1 was the positive control group infected with P. berghei followed by chloroquine administration at a dose of 5 mg/kg BW, and treatments 2, 3, 4, and 5 were groups infected with P. berghei and administered Malacca leaf ethanolic extracts at doses of 100, 300, 600, and 1200 mg/kg BW, respectively. The extracts were administered orally using a gastric tube for 4 consecutive days. Mice were sacrificed on the 7th day and livers were collected for histopathological examination.

    Results: Histopathological examination of the livers of mice infected with P. berghei demonstrated the presence of hemosiderin, hydropic degeneration, fat degeneration, necrosis, and megalocytosis. However, all these histopathological changes were reduced in the livers of P. berghei-infected mice treated with various doses of Malacca leaf ethanolic extract. The differences between the treatments were found be statistically significant (p<0.05).

    Conclusion: Ethanolic extract of Malacca leaves has the potential to protect against liver damage in mice infected with P. berghei. The dose of 600 mg/kg BW was found to be the most effective compared with the doses of 100, 300, and 1200 mg/kg BW.

    Matched MeSH terms: Formaldehyde
  20. Abdullah CK, Ismail I, Nurul Fazita MR, Olaiya NG, Nasution H, Oyekanmi AA, et al.
    Polymers (Basel), 2021 May 17;13(10).
    PMID: 34067604 DOI: 10.3390/polym13101615
    The effect of incorporating different loadings of oil palm bio-ash nanoparticles from agriculture waste on the properties of phenol-formaldehyde resin was investigated in this study. The bio-ash filler was used to enhance the performance of phenol-formaldehyde nanocomposites. Phenol-formaldehyde resin filled with oil palm bio-ash nanoparticles was prepared via the in-situ polymerization process to produce nanocomposites. The transmission electron microscope and particle size analyzer result revealed that oil palm bio-ash nanoparticles had a spherical geometry of 90 nm. Furthermore, X-ray diffraction results confirmed the formation of crystalline structure in oil palm bio-ash nanoparticles and phenol-formaldehyde nanocomposites. The thermogravimetric analysis indicated that the presence of oil palm bio-ash nanoparticles enhanced the thermal stability of the nanocomposites. The presence of oil palm bio-ash nanoparticles with 1% loading in phenol-formaldehyde resin enhanced the internal bonding strength of plywood composites. The scanning electron microscope image revealed that phenol-formaldehyde nanocomposites morphology had better uniform distribution and dispersion with 1% oil palm bio-ash nanoparticle loading than other phenol-formaldehyde nanocomposites produced. The nanocomposite has potential use in the development of particle and panel board for industrial applications.
    Matched MeSH terms: Formaldehyde
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links