Displaying publications 41 - 60 of 218 in total

Abstract:
Sort:
  1. Exergy analysis of a whole-crop safflower biorefinery: A step towards reducing agricultural wastes in a sustainable manner
    Khounani Z, Hosseinzadeh-Bandbafha H, Nazemi F, Shaeifi M, Karimi K, Tabatabaei M, et al.
    J Environ Manage, 2021 Feb 01;279:111822.
    PMID: 33348185 DOI: 10.1016/j.jenvman.2020.111822
    The huge amount of agro-wastes generated due to expanding agricultural activities can potentially cause serious environmental and human health problems. Using the biorefinery concept, all parts of agricultural plants can be converted into multiple value-added bioproducts while reducing waste generation. This approach can be viewed as an effective strategy in developing and realizing a circular bioeconomy by accomplishing the dual goals of waste mitigation and energy recovery. However, the sustainability issue of biorefineries should still be thoroughly scrutinized using comprehensive resource accounting methods such as exergy-based approaches. In light of that, this study aims to conduct a detailed exergy analysis of whole-crop safflower biorefinery consisting of six units, i.e., straw handling, biomass pretreatment, bioethanol production, wastewater treatment, oil extraction, and biodiesel production. The analysis is carried out to find the major exergy sink in the developed biorefinery and discover the bottlenecks for further performance improvements. Overall, the wastewater treatment unit exhibits to be the major exergy sink, amounting to over 70% of the total thermodynamic irreversibility of the process. The biomass pretreatment and bioethanol production units account for 12.4 and 10.3% of the total thermodynamic inefficiencies of the process, respectively. The exergy rates associated with bioethanol, biodiesel, lignin, biogas, liquid digestate, seed cake, sodium sulfate, and glycerol are determined to be 5918.5, 16516.8, 10778.9, 1741.4, 6271.5, 15755.8, 3.4, and 823.5 kW, respectively. The overall exergetic efficiency of the system stands at 72.7%, demonstrating the adequacy of the developed biorefinery from the thermodynamic perspective.
    Matched MeSH terms: Lignin
  2. Fulltext Conceptual design of natural composite grating platform
    Ahmad Fuad Ab Ghani, Mohamad Kamarul Anwar Sahar, Muhammad Ridzuan Husyairi Azmi, Nurul Izzati Medon, Muhammad Syazwan Samsuri, Muhammad Syurabil Abdani
    Malaysian Journal of Applied Sciences, 2018;1(2):62-70.
    MyJurnal
    There are several types of grating, such as platform, bridge decks and filters. In design process, there
    are several important terms that have to be prioritised; engineering design, strength to weight ratio, cost,
    maintainability, reparability etcetera. Advanced materials, such as composite materials offer great
    strength to weight ratio and high mechanical properties for grating fabrication. Furthermore the
    reparability and maintenance problems could be solved as it is anti corrosion and the long service life
    attribute of composite makes it a great design material for replacement of conventional steel or
    aluminium. Bio composites, such as bamboo and coir fiber yield advantage in terms of less cost and
    abundance availability compared to commercial unidirectional composite materials, such as glass fiber
    reinforced polymer (GFRP) and carbon fiber reinforced polymer (CFRP) which is considerably
    expensive yet possess higher mechanical properties. This papers presents a conceptual design of
    grating design utilizing bamboo composite as material. Pugh method has been chosen as design criteria
    selection matrix in finalizing the design of industrial grating for scaffolding (Pugh, 1991).
    Matched MeSH terms: Lignin
  3. Fulltext Experimental data on compressive and flexural strengths of coir fibre reinforced foamed concrete at elevated temperatures
    Othuman Mydin MA, Zamzani NM, Ghani ANA
    Data Brief, 2019 Aug;25:104320.
    PMID: 31428668 DOI: 10.1016/j.dib.2019.104320
    Quantifying the elevated temperature strengths of cement-based material is crucial to the design of building structural systems for fire resistance purpose. This paper collates a database of elevated temperature axial compressive and flexural strengths of coir fibre reinforced foamed concrete exposed to heating temperatures of 105 °C, 200 °C, 300 °C, 400 °C, 500 °C, 600 °C, 700 °C and 800 °C. There were four densities of foamed concrete of 700, 1100, 1500 and 1900 kg/m3 were prepared and tested. The untreated coir fibre was added in foamed concrete in percentages of 0.1%, 0.2%, 0.3%, 0.4%, 0.5%, and 0.6% by mix volume fraction. The database can aid in prediction of elevated temperature strengths of fibre reinforced foamed concrete which can be exploited to assist manufacturers to develop their products without having to perform numerous large-scale elevated temperature tests in the future.
    Matched MeSH terms: Lignin
  4. Aerobic oxidation of 5-hydroxymethylfurfural into 2,5-diformylfuran using manganese dioxide with different crystal structures: A comparative study
    Lin KA, Oh WD, Zheng MW, Kwon E, Lee J, Lin JY, et al.
    J Colloid Interface Sci, 2021 Jun 15;592:416-429.
    PMID: 33691223 DOI: 10.1016/j.jcis.2021.02.030
    Aerobic oxidation of 5-Hydroxymethylfurfural (HMF) to 2,5-Diformylfuran (DFF) using O2 gas represents a sustainable approach for valorization of lignocellulosic compounds. As manganese dioxide (MnO2) is validated as a useful oxidation catalyst and many crystalline forms of MnO2 exist, it is critical to explore how the crystalline structures of MnO2 influence their physical/chemical properties, which, in turn, determine catalytic activities of MnO2 crystals for HMF oxidation to DFF. In particular, six MnO2 crystals, α-MnO2, β-MnO2, γ-MnO2, δ-MnO2, ε-MnO2, and λ-MnO2 are prepared and investigated for their catalytic activities for HMF oxidation to DFF. With different morphologies and crystalline structures, these MnO2 crystals possess very distinct surficial chemistry, redox capabilities, and textural properties, making these MnO2 exhibit different catalytic activities towards HMF conversion. Especially, β-MnO2 can produce much higher DFF per surface area than other MnO2 crystals. β-MnO2 could achieve the highest CHMF = 99% and YDFF = 97%, which are much higher than the reported values in literature, possibly because the surficial reactivity of β-MnO2 appears to be highest in comparison to other MnO2 crystals. Especially, β-MnO2 could exhibit YDFF > 90% over 5 cycles of reusability test, and maintain its crystalline structure, revealing its advantageous feature for aerobic oxidation of HMF to DFF. Through this study, the relationship between morphology, surface chemistry, and catalytic activity of MnO2 with different crystal forms is elucidated for providing scientific insights into design, application and development of MnO2-based materials for aerobic oxidation of bio-derived molecules to value-added products.
    Matched MeSH terms: Lignin
  5. Sustainable and cost-effective approach for the synthesis of lignin-containing cellulose nanocrystals from oil palm empty fruit bunch
    Teh KC, Foo ML, Ooi CW, Leng Chew IM
    Chemosphere, 2021 Mar;267:129277.
    PMID: 33385850 DOI: 10.1016/j.chemosphere.2020.129277
    Cellulose nanocrystals (CNC) have received great research attention since the last few decades due to their extraordinary properties and wide range of applications. In this study, a sustainable and cost-effective method for the synthesis of lignin-containing cellulose nanocrystals (LCNC) from oil palm empty fruit bunch (EFB) is presented. This method is able to retain the lignin in EFB and manifest the properties of lignin. The proposed synthesis process is simpler than the conventional method of producing lignin-coated CNC by first removing the lignin to synthesize CNC followed by the re-coating of lignin on the structure. The samples of LCNC were characterized by transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy and water contact angle analysis. In addition, by altering the acid concentration during acid hydrolysis process (53% - 60% H2SO4), both surface hydrophobicity (66.0° - 75.1°) and length of LCNC (467 nm-177 nm) can be altered wherein a higher concentration of acid resulted in a greater contact angle and a shorter length of LCNC. Cost and energy analysis deduced that the proposed synthesis method saved about 62% of the total material cost and 80% less energy as compared to the synthesis of lignin-coated CNC.
    Matched MeSH terms: Lignin
  6. Fulltext Ganoderma Boninense efficacy in delignifying Oil Palm empty fruit bunches
    Siti Sarah Jumali, Shaleha Ismail
    Pertanika Journal of Science & Technology, 2017;25(103):1-8.
    MyJurnal
    Oil palm empty fruit bunches (EFB) were subjected to microbial pre-treatment of lignocellulosic biomass bioconversion to fermentable sugar. Microbial pre-treatment was carried out by inoculating Ganoderma boninense spores through solid state fermentation. The samples were initially treated with Sulphuric acid method prior to reading with UV-Visible Spectrometer. The readings were taken before and after inoculation of EFB with G. boninense. Bioconversion of 20 g EFB via solid state fermentation was done in five different amounts of G. boninense spore namely 0.0 g (control), 0.5 g (T2), 0.7 g (T3), 0.9 g (T4) and 1.1 g (T5) in 7 days. The result shows the highest delignification in sample inoculated with 1.1g of G. boninense spores, in which the spores are successfully reduced by 61.97% of lignin from total EFB biomass in 7 days compared to 60.08% (T4), 58.65% (T3) and 54.85% (T2). Meanwhile, for control the lignin content was reduced by 5.07% in 7 days. The study shows that G. boninense has the ability to remove lignin from EFB whereby longer incubation period and higher number of spores contribute to higher delignification percentage.
    Matched MeSH terms: Lignin
  7. Fulltext Structural examination and elemental composition analysis of rattan waste fibers for binderless board application
    Zuraida, A., Maisarah, T., Zahurin, H., Muhammad Luqman, A., Roszaliya, A., Wan Shazlin Maisarah, W.M.Y., et al.
    Malaysian Journal of Microscopy, 2015;11(1):39-44.
    MyJurnal
    The chemical composition and anatomical characteristics on lignin distribution of rattan waste were analyzed to determine its suitability to be used in binderless board fabrication. The chemical composition was analyzed by using TAPPI methods. Observation and determination of lignin distribution and board structure were executed by using optical microscopy (OM) and scanning electron microscope (SEM). High amount of hemicellulose, cellulose and lignin content found in rattan waste chemical composition is seen to help in binderless board fabrication. The micrographs revealed that the rattan has fine structural construction that helps in producing good qualities of binderless boards with particular manufacturing parameters.
    Matched MeSH terms: Lignin
  8. Fulltext Potential of coir fibres as soil reinforcement
    Pvivi Anggraini
    The Pertanika Journal of Scholarly Research Reviews, 2016;2(1):95-106.
    MyJurnal
    This paper presents an evaluation of the alternative use of natural cellulose coir fibres for
    soil reinforcement. Soil reinforcement is defined as a technique to improve the engineering properties
    of soil. Inserting natural fibres into the soil has been proposed as a reinforcement method. Randomly
    distributed coir fibre reinforced soils have recently attracted increasing attention in geotechnical
    engineering due to their strength. Furthermore, there is a need to develop an innovative and
    sustainable pre-treatment method to improve the effectiveness and performance of coir fibre as soil
    reinforcement. The primary purpose of this paper is, therefore, to review the characteristics, benefits,
    applications and weaknesses of coir fibre as soil reinforcement.
    Matched MeSH terms: Lignin
  9. Influence of humic acids on radium adsorption by coir pith in aqueous solution
    Zalina Laili, Muhamad Samudi Yasir, Muhamat Omar, Mohd Zaidi Ibrahim, Philip E
    Sains Malaysiana, 2010;39:333-336.
    This study examines the influence of humic acids (HA) on adsorption of radium (Ra) ions onto coir pith (CP) in aqueous solution. The adsorption behaviours of Ra ions onto CP under the influence of HA in aqueous solution were investigated in the series of batch mode adsorption experiments. The effects of various experimental conditions such as pH, contact time, adsorbent dosage and initial concentration of Ra ions have been studied. The results revealed that the presence of HA in aqueous solution enhanced the adsorption of Ra ions onto CP. The adsorption results showed that the percentage of Ra adsorbed was increased with an increase in the pH or alkalinity of aqueous solutions. Time dependence of the batch studies showed that a contact time of one day was sufficient to reach equilibrium. The result also showed that there was no significant difference on the effect of adsorbent dose on adsorption of radium onto CP. It was shown that the equilibrium data could be fitted by Freundlich equation.
    Matched MeSH terms: Lignin
  10. Kesan mangkin ke atas resin fenolik biopolimer dengan menggunakan kaedah pencecairan lignin soda
    Sharifah Nabihah Syed Jaafar, Sarani Zakaria, Rozaidi Rasid, Nurul Ain Zulkifli, Ali Ahmadzadeh
    Sains Malaysiana, 2010;39.
    Proses pencecairan lignin soda telah dilakukan dengan menggunakan fenol dengan nisbah 1:3. Proses dilakukan selama 90 minit pada suhu 130oC dalam keadaan refluk. Hasil pencecairan iaitu pemfenolan lignin (PL) telah dianalisis dengan Spektrometer Inframerah Transformasi Fourier (FTIR), reometer dan analisis termogravimetri (TGA). Sampel yang disintesis dengan menggunakan asid hidroklorik sebagai mangkin memberikan keputusan yang terbaik. Analisis FTIR menunjukkan kehadiran kumpulan berfungsi yang signifikan seperti gelang aromatik, alkohol dan karbonil. Kesemua sampel PL mematuhi persamaan Arhenius dan bersifat pseudo-plastik. Peratus kehilangan berat sampel dan kadar penguraian sampel PL dipengaruhi oleh jenis mangkin yang digunakan. Sampel PL yang disintesis dikelaskan sebagai biopolimer resin fenolik.
    Matched MeSH terms: Lignin
  11. Sequential pretreatment with alkaline hydrogen peroxide and choline chloride:copper (II) chloride dihydrate - Synergistic fractionation of oil palm fronds
    Ho MC, Wu TY
    Bioresour Technol, 2020 Apr;301:122684.
    PMID: 31954964 DOI: 10.1016/j.biortech.2019.122684
    In this study, a novel Type II deep eutectic solvent (DES) namely, choline chloride:copper(II) chloride dihydrate (ChCl:CuCl2·2H2O) was used to pretreat oil palm fronds (OPFs). The sequential pretreatment with alkaline hydrogen peroxide (0.25 vol%, 90 min) at ambient conditions and a Type II DES (90 °C, 3 h) at a later stage resulted in a delignification of 55.14% with high xylan (80.79%) and arabinan (98.02%) removals. The characterizations of pretreated OPFs confirmed the excellent performance of DES in OPF fractionation. Thus, the application of a Type II DES at ambient pressure and relatively lower temperature was able to improve the lignin and hemicellulose removals from OPFs.
    Matched MeSH terms: Lignin
  12. Combination of gamma irradiation and sodium carbonate pretreatment on oil palm empty fruit bunch (efb) for high acidic hydrolysis yield
    Siew XC, Chin HC, Sarani Zakaria, Sahrim Ahmad, Siti Masrinda Tasirin
    Sains Malaysiana, 2017;46:167-173.
    Oil palm empty fruit bunch (EFB) fibres were pretreated by gamma irradiation followed by sodium carbonate (Na2
    CO3
    )
    before the acid hydrolysis process to produce reducing sugars using diluted sulphuric acid (H2
    SO4
    ). In this study, EFB
    fibres were irradiated at different doses, i.e. 0, 100 and 200 kGy. Meanwhile, the gamma irradiated sample were then
    subjected to Na2
    CO3 pretreatment with 0 and 5% total titratable alkali (TTA). The effect of the pretreatment using gamma
    irradiation and Na2
    CO3
    on the physical and chemical properties of the EFB fibres and the yield of the reducing sugar
    obtained from the acid hydrolysis process was investigated. The obtained results showed that the content of holocellulose
    was increased significantly with the increase of irradiation doses combined with Na2
    CO3 pretreatment, whereas lignin
    content of the EFB was decreased. The gamma irradiation and Na2
    CO3 pretreatment resulted in structure breakage
    and removal of silica of EFB fibres which can be due to the swelling of the fibres. A synergistic effect between gamma
    irradiation and Na2
    CO3 was observed, in which the yield of reducing sugars was increased by combining the gamma
    irradiation and Na2
    CO3 pretreatment.
    Matched MeSH terms: Lignin
  13. Phyllosilicate derived catalysts for efficient conversion of lignocellulosic derived biomass to biodiesel: A review
    Nawaz S, Ahmad M, Asif S, Klemeš JJ, Mubashir M, Munir M, et al.
    Bioresour Technol, 2022 Jan;343:126068.
    PMID: 34626762 DOI: 10.1016/j.biortech.2021.126068
    The efforts have been made to review phyllosilicate derived (clay-based) heterogeneous catalysts for biodiesel production via lignocellulose derived feedstocks. These catalysts have many practical and potential applications in green catalysis. Phyllosilicate derived heterogeneous catalysts (modified via any of these approaches like acid activated clays, ion exchanged clays and layered double hydroxides) exhibits excellent catalytic activity for producing cost effective and high yield biodiesel. The combination of different protocols (intercalated catalysts, ion exchanged catalysts, acidic activated clay catalysts, clay-supported catalysts, composites and hybrids, pillared interlayer clay catalysts, and hierarchically structured catalysts) was implemented so as to achieve the synergetic effects (acidic-basic) in resultant material (catalyst) for efficient conversion of lignocellulose derived feedstock (non-edible oils) to biodiesel. Utilisation of these Phyllosilicate derived catalysts will pave path for future researchers to investigate the cost-effective, accessible and improved approaches in synthesising novel catalysts that could be used for converting lignocellulosic biomass to eco-friendly biodiesel.
    Matched MeSH terms: Lignin
  14. Structural properties and hydrolysability of recycled poplar residues (Populus L.): Effects of two-step acetic acid and sodium sulphite pre-treatment
    Chu J, Li S, Chen N, Wen P, Sonne C, Ma NL
    Chemosphere, 2022 Mar;291(Pt 1):132679.
    PMID: 34718007 DOI: 10.1016/j.chemosphere.2021.132679
    Poplar trees rapidly yield wood and are therefore suitable as a biofuel feedstock; however, the quality of poplar is modest, and the profitability of poplar cultivation depends on the efficiency of the harvesting process. This study offers a simple and sustainable technique to harvest lignocellulosic resources from poplar for bioethanol production. The proposed two-step pretreatment method increased the surface lignin content and decreased the surface polysaccharide content. The cellulose content increased to 54.9% and the xylan content decreased to 6.7% at 5% AC. The cellulose yield of poplar residues (Populus L.) reached 65.5% by this two-step acetic acid (AC) and sodium sulphite (SS) treatment method. Two-step pretreatment using 5% AC and 4% SS obtained a recovery of nearly 80% of the total available fermentable sugar. The surface characterization showed a higher porosity in treated samples, which improved their hydrolysability. This method decreased the amount of lignin in plant biomass, making it applicable for further wood resource recovery or waste recycling for biorefinery purposes at very low costs.
    Matched MeSH terms: Lignin
  15. Deep eutectic solvent and inorganic salt pretreatment of lignocellulosic biomass for improving xylose recovery
    Loow YL, Wu TY, Yang GH, Ang LY, New EK, Siow LF, et al.
    Bioresour Technol, 2018 Feb;249:818-825.
    PMID: 29136937 DOI: 10.1016/j.biortech.2017.07.165
    Deep eutectic solvents (DESs) have received considerable attention in recent years due to their low cost, low toxicity, and biodegradable properties. In this study, a sequential pretreatment comprising of a DES (choline chloride:urea in a ratio of 1:2) and divalent inorganic salt (CuCl2) was evaluated, with the aim of recovering xylose from oil palm fronds (OPF). At a solid-to-liquid ratio of 1:10 (w/v), DES alone was ineffective in promoting xylose extraction from OPF. However, a combination of DES (120°C, 4h) and 0.4mol/L of CuCl2 (120°C, 30min) resulted in a pretreatment hydrolysate containing 14.76g/L of xylose, remarkably yielding 25% more xylose than the CuCl2-only pretreatment (11.87g/L). Characterization studies such as FE-SEM, BET, XRD, and FTIR confirmed the delignification of OPF when DES was implemented. Thus, the use of this integrated pretreatment system enabled xylose recoveries which were comparable with other traditional pretreatments.
    Matched MeSH terms: Lignin
  16. Organosolv Processes
    Brosse N, Hussin MH, Rahim AA
    Adv. Biochem. Eng. Biotechnol., 2017 3 11;166:153-176.
    PMID: 28280848 DOI: 10.1007/10_2016_61
    Biofuels and chemicals can be produced from lignocellulosic feedstocks using biotechnological processes. The effective utilization of carbohydrates from biomass for the production of biofuels necessitates the development of pretreatment technologies to enhance their enzymatic digestibility. Among all the various pretreatment methods currently studied and developed, the organosolv processes, in which organic solvents or aqueous organic solvent mixtures are used as the pretreatment medium, appear to be specially promising in the context of the biorefinery because (1) they produce cellulosic pulp with a good enzymatic digestibility for monomeric glucose production and (2) they allow a clean fractionation of the major biomass components (cellulose, lignin, and hemicelluloses) into three process streams. In this chapter we give an updated overview of organosolv methods using conventional solvents and ionic liquids which have recently gained considerable interest as solvents for lignocellulosic biomass and pretreatment.
    Matched MeSH terms: Lignin
  17. Assessment of pure, mixed and diluted deep eutectic solvents on Napier grass (Cenchrus purpureus): Compositional and characterization studies of cellulose, hemicellulose and lignin
    Gundupalli MP, Cheenkachorn K, Chuetor S, Kirdponpattara S, Gundupalli SP, Show PL, et al.
    Carbohydr Polym, 2023 Apr 15;306:120599.
    PMID: 36746569 DOI: 10.1016/j.carbpol.2023.120599
    Pretreatment with pure, mixed, and diluted deep eutectic solvents (DESs) was evaluated for its effect on Napier grass through compositional and characterization studies. The morphological changes of biomass caused by pretreatment were analyzed by FTIR and XRD. The cellulose and hemicellulose content after pretreatment using mixed DES increased and decreased 1.29- and 4.25-fold, respectively, when compared to untreated Napier grass. The crystallinity index (CrI. %) of mixed DES sample increased due to the maximum removal of hemicellulose (76 %) and delignification of 62 %. The material costs of ChCl/FA and ChCl/LA for a single run are ≈2.16 USD and ≈1.65 USD, respectively. Pure DES showed that ChCl/LA pretreatment enhanced delignification efficiency and that ChCl/FA increased hemicellulose removal. It was estimated that a single run using ChCl/LA:ChCl/FA to achieve maximum hemicellulose and lignin removal would cost approximately ≈1.89 USD. Future work will evaluate the effect of DES mixture on enzyme digestibility and ethanol production from Napier grass. HYPOTHESES: Deep eutectic solvent (DES) pretreatment studies on the fractionation of lignocellulosic biomass have grown exponentially. The use of pure and diluted DES has been reported to improve saccharification efficiency, delignification, and cellulose retention (Gundupalli et al., 2022). These studies have reported maximum lignin removal but also a lower effect on hemicellulose removal from lignocellulosic biomass. It was hypothesized that mixing two pure DESs could result in maximum removal of hemicellulose and lignin after pretreatment. To our knowledge, no studies have been performed to investigate the efficiency of pretreatment using a DES mixture and compared the outcome with pure and diluted DESs. Furthermore, it was hypothesized that using two pure DESs in a mixed form could lower the material cost for each experimental run. Process efficiency was determined by compositional, XRD, and FTIR analysis. Avenues for future research include determining glucose and ethanol yields during the enzymatic saccharification and fermentation processes.
    Matched MeSH terms: Lignin
  18. Divergent accumulation of amino sugars and lignins mediated by soil functional carbon pools under tropical forest conversion
    Li T, Cheng H, Li Y, Mou Z, Zhu X, Wu W, et al.
    Sci Total Environ, 2023 Jul 10;881:163204.
    PMID: 37044342 DOI: 10.1016/j.scitotenv.2023.163204
    Tropical primary forests are being destroyed at an alarming rate and converted for other land uses which is expected to greatly influence soil carbon (C) cycling. However, our understanding of how tropical forest conversions affect the accumulation of compounds in soil functional C pools remains unclear. Here, we collected soils from primary forests (PF), secondary forests (SF), oil-palm (OP), and rubber plantations (RP), and assessed the accumulation of plant- and microbial-derived compounds within soil organic carbon (SOC), particulate (POC) and mineral-associated (MAOC) organic C. PF conversion to RP greatly decreased SOC, POC, and MAOC concentrations, whereas conversion to SF increased POC concentrations and decreased MAOC concentrations, and conversion to OP only increased POC concentrations. PF conversion to RP decreased lignin concentrations and increased amino sugar concentrations in SOC pools which increased the stability of SOC, whereas conversion to SF only increased the lignin concentrations in POC, and conversion to OP just increased lignin concentrations in POC and decreased it in MAOC. We observed divergent dynamics of amino sugars (decrease) and lignin (increase) in SOC with increasing SOC. Only lignin concentrations increased in POC with increasing POC and amino sugars concentrations decreased in MAOC with increasing MAOC. Conversion to RP significantly decreased soil enzyme activities and microbial biomasses. Lignin accumulation was associated with microbial properties, whereas amino sugar accumulation was mainly associated with soil nutrients and stoichiometries. These results suggest that the divergent accumulation of plant- and microbial-derived C in SOC was delivered by the distribution and original composition of functional C pools under forest conversions. Forest conversions changed the formation and stabilization processes of SOC in the long run which was associated with converted plantations and management. The important roles of soil nutrients and stoichiometry also provide a natural-based solution to enhance SOC sequestration via nutrient management in tropical forests.
    Matched MeSH terms: Lignin
  19. Sustainable lignin nanoparticles from coconut fiber waste for enhancing multifunctional properties of macroalgae biofilms
    Alfatah T, Abdul Khalil HPS
    Int J Biol Macromol, 2024 Feb;258(Pt 2):128858.
    PMID: 38128796 DOI: 10.1016/j.ijbiomac.2023.128858
    Multifunctional and sustainable packaging biofilms felicitous to changeable conditions are in large demand as substitutes to petroleum-derived synthetic films. Macroalgae with noticeable film-formation, abundant, low-cost, and edible properties is a promising bioresource for sustainable and eco-friendly packaging materials. However, the poor hydrophobicity and mechanical properties of sustainable macroalgae biofilms seriously impede their practical applications. Herein, lignin nanoparticles (LNPs) produced by a sustainable approach from black liquor of coconut fiber waste were incorporated in the macroalgae matrix to improve the water tolerance and mechanical characteristics of the biofilms. The effect of different LNPs loadings on the performance of biofilms, such as physical, morphological, surface roughness, structural, water resistance, mechanical, and thermal behaviors, were systematically evaluated and found to be considerably improved. Biofilm with 6 % LNPs presented the optimum enhancement in most ultimate performances. The optimized biofilm exhibited great hydrophobic features with a water contact angle of over 100° and high enhancement in the tensile strength of >60 %. This study proposes a facile and sustainable approach for designing and developing LNPs-macroalgae biofilms with excellent and multifunctional properties for sustainable high-performance packaging materials.
    Matched MeSH terms: Lignin
  20. Aromatic biomass (torch ginger) leaf-derived three-dimensional honeycomb-like carbon to enhance gravimetric supercapacitor
    Taer E, Yanti N, Padang E, Apriwandi A, Zulkarnain Z, Haryanti NH, et al.
    J Sci Food Agric, 2023 Dec;103(15):7411-7423.
    PMID: 37431642 DOI: 10.1002/jsfa.12846
    BACKGROUND: Porous carbon electrode (PCE) is identified as a highly suitable electrode material for commercial application due to its production process, which is characterized by simplicity, cost-effectiveness and environmental friendliness. PCE was synthesized using torch ginger (Etlingera elatior (Jack) R.M. Smith) leaves as the base material. The leaves were treated with different concentrations of ZnCl2 , resulting in a supercapacitor cell electrode with unique honeycomb-like three-dimensional (3D) morphological pore structure. This PCE comprises nanofibers from lignin content and volatile compounds from aromatic biomass waste.

    RESULTS: From the characterization of physical properties, PCE-0.3 had an impressive amorphous porosity, wettability and 3D honeycomb-like structural morphology with a pore framework consisting of micropores and mesopores. According to the structural advantages of 3D hierarchical pores such as interconnected honeycombs, PCE-0.3 as supercapacitor electrode had a high specific capacitance of up to 285.89 F g-1 at 1 A. Furthermore, the supercapacitor exhibited high energy and power density of 21.54 Wh kg-1 and 161.13 W kg-1 , respectively, with a low internal resistance of 0.059 Ω.

    CONCLUSION: The results indicated that 3D porous carbon materials such as interconnected honeycombs derived from the aromatic biomass of torch ginger leaves have significant potential for the development of sustainable energy storage devices. © 2023 Society of Chemical Industry.

    Matched MeSH terms: Lignin
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links