Mushroom cultivation has been more popular recently in Malaysia. They are favoured due to their delicious flavour and low calorific value. Apart from that, they also contain high amount of protein and other essential nutrients. As recommended by food pyramid, people should take in more of their calories from whole grains-based foods than any other sources. Three selected carbohydrate based products namely rice-porridge (RP), paratha flat bread (PB) and conventional cake (CC) were formulated with dried Pleurotus sajor-caju (PSC) powder. All three products were analyzed for proximate analysis and sensory evaluation. Result shows the percentage of moisture, ash, fat and protein of RP increased in line with the levels of PSC powder used except for carbohydrate. Whereas for PB and CCs added with 2%, 4% and 6% PSC, the percentage of all nutrients were higher than control (0%) except for fat. Mushroombased RP had significantly higher value of odour attribute as compared to control, with RP added with 6% PSC powder received the highest score. Meanwhile, mushroom-based PB received better score on textural attribute compared the control. In CC, panels prefer the cake added with 4% PSC powder as they gave higher scores for softness and flavour attributes. In conclusion, addition of PSC powder to partially replace rice and wheat flour in RP, CC and PB enhance essential nutritional components and well accepted by consumers. Thus, PSC powder can be considered to be utilized in carbohydrate–based food products with the purpose of enhancing nutrient compositions without affecting its sensory acceptance.
The development of food products using composite flour has increased and is attracting much attention from researchers, especially in the production of bakery products and pastries. This article focuses on the use of composite flour to produce food products, namely bread, biscuits, and pasta, with looks at on its impact, following some improvements made, on the sensory quality, rheology characteristics, and nutritional values as well as its overall acceptance. The blending of wheat flour with various sources of tubers, legumes, cereals and fruit flour in different percentages to produce variety of food products are also reported in this review. It was found that composite flour used to produce food products is still able to maintain similar characteristics to products made from full-wheat flour. The positive effects of the use of composite flour can be seen in the final product related to the functional and physicochemical properties and health benefits of raw blended flour along with percentage blending. Overall, composite flour is a good new approach to utilizing uncommon food products as the application of composite flour produced products with different characteristics and quality, depending on the types and percentage of wheat flour used in the formulation.
Banana pulp (BP) noodles prepared by partial substitution of wheat flour with green Cavendish banana pulp flour were assessed pH, color, tensile strength and elasticity, and in-vitro hydrolysis index (HI) and estimated glycemic index (GI). BP noodles had lower L* (darker) and b* values (less yellow) but higher tensile strength and elasticity modulus than control noodles. Following an in-vitro starch hydrolysis studies, it was found that GI of BP noodles was lower than control noodles. Partial substitution of green banana pulp into noodles may be useful for controlling starch hydrolysis of yellow noodles.
This study evaluated the effects of different flours (tapioca, wheat, sago and potato) on the physicochemical properties of duck sausage. The examined physicochemical properties included proximate composition, cooking yield, color (lightness, redness and yellowness), folding, texture profile (hardness, elasticity, cohesiveness, gumminess and chewiness) and sensory properties. The study found that different flours have no effect on the cooking yield of duck sausage. The tapioca formulation showed a mid-range lightness value, folding score and textural properties. Duck sausages made with wheat flour had higher protein content and lightness value and a harder texture. Sausages made with potato flour had a darker color, the lowest folding scores and a softer texture. The addition of sago flour resulted in a higher folding score, greater elasticity and increased overall acceptability of sausage due to higher scores for texture and juiciness. These results show that the properties of duck sausage are influenced by the type of flour used.
This study was to investigate the effects of wheat flour substitution with legume flour (mung bean and chick pea) in cookies in terms of the physicochemical and organoleptic properties. Three formulations of cookies were prepared from (a) Control (100% wheat flour), (b) Mung bean (50% wheat flour + 35% mung bean flour + 15% corn flour) and (c) Chickpea (50% wheat flour + 35% chickpea flour + 15% corn flour). The physicochemical and organoleptic attributes of the three types of cookie were evaluated. Results showed significant different (p
The objective of this study was to evaluate the effects of using tapioca and sago flours with or without egg white powder (EWP) on the physicochemical and sensory properties of duck sausages. There was significant increase (P0.05) in hardness and cohesiveness attributes among all the samples examined but significant differences (P
Over 114 countries in the world grow rice and more than 50 countries have an annual rice production of 100,000 tonnes or more. Asian farmers produce about 90% of the global total rice production. Generally, there are two most common varieties of rice; cultivated and hill rice. Nowadays a lot of agriculture land is contaminated with toxic elements owing to the use of sludge or municipal compost, pesticides, fertilizers and emissions from municipal waste incinerators, car exhausts, residues from metalliferous mines, and smelting industries. The distribution and concentration of several toxic elements in grains particularly rice has lately become a big concern. A study to determine the concentrations of some elements in a few varieties of rice in our local market using Instrumental Neutron Activation Analysis has been performed by Waste and Environmental Technology Division, Malaysian Nuclear Agency. A total of 15 elements were measured. The method was validated by analysing the Standard Reference Material SRM-1568a (Rice Flour) and SRM-1573a (Tomato Leaves) of NIST. The measured concentrations of major and minor elements were analysed in terms of the average intake of nutrient content and comparison of several toxic elements to other studied values.
Evaluation on the physicochemical and sensory properties of wheat flour doughnuts substituted with banana flour (BF) was investigated. Wheat flour was substituted with green banana (Musa paradisiaca var. Awak) flour at 0% (control), 10%, 20% and 30% levels in yeast-raised doughnut prepared by the straight dough method. Chemical (moisture, fat, protein, ash, carbohydrate, crude fibre, total dietary fibre and caloric content), physical (volume, specific volume and colour) and sensory evaluation were conducted on all samples. Chemical analyses result indicated a higher percentage of total dietary fibre and caloric content in doughnut substituted with BF than the control. Colour evaluation showed that the dough, crust and crumb of doughnut with BF ranged from 68.97 ± 0.59 – 84.78 ± 0.16 (red – yellow quadrant). The change from light to darker colour correlated with the amount of BF added. Results also showed that the volume and specific volume was significantly affected (p < 0.05) by levels of BF substituted. Doughnut substituted with 20% BF showed the highest score in overall acceptability (6.71 ± 1.40).
Cavendish (Musa paradisiaca L, cv cavendshii) and Dream (Musa acuminata colla. AAA, cv ‘Berangan’) banana flours were prepared from ripe fruits collected from eleven markets located in Penang, Malaysia. The mineral composition (Na, K, Ca, Mg, Cu, Fe, Mn, Zn) of the flour were analyzed by atomic absorption spectrophotometer and the data obtained were analyzed using logistic regression model. Ripe banana flours were rich source of K and a fair source of other minerals, however logistic regression model identified Mg as an indicator to discriminate between the two types of banana flour affording 100 % correct assignation. Based on this result, mineral analysis may be suggested as a method to authenticate ripe banana flour. This study also presents the usefulness of logistic regression technique for analysis and interpretation of complex data.
Pumpkin products confer natural sweetness, desirable flavours and β-carotene, a vitamin A precursor when added as ingredients to extruded snacks. Therefore, a potential use for dried pumpkin flour is as an ingredient in ready-to-eat (RTE) snack foods. Growth in this market has driven food manufacturers to produce a variety of new high value snack foods incorporating diverse ingredients to enhance the appearance and nutritional properties of these foods. Ready-to-eat snacks were made by extruding corn grits with 5%, 10%, 15% and 20% of pumpkin flour. Snacks made from 100% corn grits were used as control products for this work. The effect of formulation and screw speeds of 250 rpm and 350 rpm on torque and specific mechanical energy (SME, kWh/kg), physical characteristics (expansion ratio, bulk density, true density and hardness) and the microstructure of the snacks were studied. Increasing the screw speed resulted in a decrease of torque for all formulations. When pumpkin flour was added the specific mechanical energy (SME) decreased by approximately 45%. Increasing the percentage of pumpkin flour at the higher screw speed resulted in a harder texture for the extruded products. X-ray tomography of pumpkin flour-corn grit snacks showed that increased levels of pumpkin flour decreased both the bubble area and bubble size. However, no significant differences (p > 0.05) in bubble wall thickness were measured. By understanding the conditions during extrusion, desirable nutritional characteristics can be incorporated while maximizing expansion to make a product with low bulk density, a fine bubble structure and acceptable organoleptic properties.
The objective of this research is to develop an “energy” snack bar supplying energy and
electrolytes in one bar by utilizing local Malaysian ingredients. The local ingredients used to make
this snack bar were banana, glutinous rice flour, and coconut milk. It is a wholesome nutritious
food for different age groups from adolescents to elderly people. Proximate composition, total
carbohydrate, energy value, and sensory quality of prototype were determined. The developed
snack bar contains 13.23% of moisture, 1.13% of ash, 6.36% of crude protein, 22.39% of
crude fat, 1.16% of crude fibre, 56.89% of total carbohydrate, and 454.51 kcal of energy. The
“energy” snack bar was highly acceptable with desirable sensory quality by all consumers.
This study examined the physicochemical properties of rice flours with five different particle sizes (≤63, 80, 100, 125, and 140 μm) prepared by dry milling and their effects on textural properties of laksa noodles. Rice flour with the smallest particle size had the highest water absorption index, peak viscosity, hot paste viscosity, breakdown, final or cold paste viscosity and gel hardness, but the lowest gelatinization temperature. Reduction of rice flour particle size improved textural properties of laksa noodle. Laksa noodle produced from rice flour with the smallest particle size had the best textural properties.
Adzuki bean is high in protein and fiber with a potential to be used as meat extender and fat replacer in the meat product. Replacement of both the corn flour and fat with different percentages of adzuki beans flour (ABF) has successfully produced acceptable reduced fat meatballs. Meatballs with 100% (w/w) ABF replacement exhibited highest cooking yield and higher moisture content compared to meatballs without the flour, which indicates its ability to bind water. Increasing the ABF content also increased the hardness and chewiness of the meatballs, whilst decreasing their lightness and yellowness. Replacing the corn flour and fat contents with ABF has obviously decreased the fat and calorie contents of the meatballs, yet their protein and carbohydrate contents remained the same compared to control. The sensory test revealed that meatball samples with 25% (w/w) and 50% (w/w) ABF showed no significant difference compared to control but received highest overall acceptability among the panelists. This indicates that replacement of corn flour and fat with ABF especially at 50% (w/w) in the production of reduced fat meatballs resulted with better physicochemical properties and acceptable sensory compared to original meatballs.
The primary objectives of this study were to process corncob into corncob powder (CCP)
and to apply CCP in the formulation of instant cereal beverage (ICB) in order to produce
high fibre ICB, and to investigate the physicochemical and sensory properties of the
corncob-based instant cereal beverage. Corncobs were sourced and washed thoroughly
before drying and grinding into CCP. CCP was then imparted into ICB formulation in
three different ratios (10, 20 and 30% w/w) to partially substitute corn flour in the
formulation. All four ICB samples including the commercial counterpart were analysed
for their physicochemical and sensory properties. The incorporation of CCP has affected
the viscosity, colour and sensory attributes significantly of the produced ICB. Higher
contents of CCP in the formulation was found to be responsible for less viscous and
browner effect compared to the commercial ICB samples. Formulation of ICB
incorporated with 30% w/w CCP had the highest mean scores (6.00, p
Incorporation of Green Banana Flour (BF) into Chinese steamed bread (CSB) may be a
strategy to fortify the traditional CSB due to its health benefits. However, BF-incorporated
foods in general, have poorer sensory properties affecting consumer acceptability. The aim
of this study was to examine the adjustment of water content from the original formulation
and addition of coffee flavour on physical properties and consumer acceptability of BFincorporated
CSB. Wheat flour as control was substituted with 15% BF varied by addition
of 30% water and coffee flavour. Physical analysis (colour, volume, spread ratio and
texture) of CSB and hedonic test for appearance, aroma, flavour, overall acceptability and
preference ranking of CSB were conducted. Results showed no significant differences
(p>0.05) in specific volume, springiness, and adhesiveness among samples. A significant
increase (p
Sufficient intakes of functional foods containing significant amount of dietary fibre in daily diet are beneficial to human health especially in preventing the prevalence of non-communicable diseases (NCDs). In this study, young corn powder (YCP) was added into Malaysian star cake (Baulu Cermai) to replace wheat flour (WF) partially at the formulations of 5, 10 and 15%. Baulu Cermai with 100% WF and 0% YCP was used as the control. The aim of the present study was to evaluate the effects of YCP addition on the nutritional composition, textural properties and sensory attributes of Baulu Cermai. The results showed that the mean values of moisture, ash, fat and protein content of Baulu Cermai increased in line with the levels of YCP incorporation. In addition, the total dietary fibre (TDF) content was increased proportionally with the increasing levels of YCP added into Baulu Cermai. Addition of YCP did not show any predictable trend in all the textural properties of Baulu Cermai. Meanwhile, the aroma, chewiness and tenderness increased in parallel with the increasing percentages of YCP added in the formulated products. Baulu Cermai added with 10% of YCP showed the highest score of overall acceptance. Addition of YCP at 10% into Baulu Cermai increases moisture, ash, fat, protein and total dietary fibre content without significantly affecting the textural properties and the sensory attributes of Baulu Cermai. Addition of YCP at 5% to replace WF partially in Baulu Cermai resulted in slight improvement of TDF and fat but does not affected moisture, ash, protein content and acceptability of the consumers.
Dough mixing and thermal properties including the pasting profiles of various commercial wheat flour (WF)-banana pseudostem flour (BP)-hydrocolloid blends were determined using a farinograph, differential scanning calorimetry (DSC) and a rapid-visco analyser (RVA). The prepared blends were WF, WF substituted with 10% BP (10BP) and 10BP with added 0.8% w/w (flour weight basis) xanthan gum (XG) or sodium carboxymethylcellulose (CMC) (10BPX and 10BPC, respectively). The dough of 10BP and the doughs containing XG or CMC reduced stability and breakdown time compared with the WF dough. All dough containing BP demonstrated greater water absorption and mixing tolerance index values than the WF dough. The substitution of 10% BP into WF and the addition of hydrocolloids did not significantly affect the conclusion temperature (Tc) of the mixture, but did increased the onset temperature (To), peak temperature (Tp) and decreased the gelatinisation enthalpy change (ΔHg) of the blends. Samples of 10BP, 10BPX and 10BPC significantly decreased (p
The aim of this study was to evaluate the effect of barrel temperature and flour types on the residence time and physical properties of various flour extrudates. Corn flour, rice flour, corn flour with potato starch (30% w/w, d.b), and rice flour with potato starch (30%w/w, d.b) were extruded at screw speed of 75rpm, feed moisture at 25% (w/w, w.b.), barrel temperature ranging from 80°C to 140°C and die size of 1.88mm. The extrudates were dried at 50°C overnight and further analysed. Results showed that an increase in extruder barrel temperature decreased the residence time of the flours in the extruder (from 4.11-11.32min to 2.24-6.76min), but increased the expansion ratio, rehydration ratio, water absorption index, water solubility index and b value of the extrudate (p≤0.05). The extrudates had the mean residence time and physical properties of rice flour
Belinjau (Gnetum gnemon L.) seed flour was evaluated for nutritional composition, antioxidant activity and functional properties. Seed flour was found to be rich in protein (19.0g/100g), crude fibre (8.66g/100g), carbohydrates (64.1%), total dietary fibre (14.5%) and encompassed adequate amounts of essential amino acids, fatty acids and minerals. Antioxidant compounds such as total phenols (15.1 and 12.6mgGAE/100g), tannins (35.6 and 16.1mgCE/100g) and flavonoids (709 and 81.6mgCEQ/100g) were higher in ethanolic extracts over aqueous extracts, respectively. Inhibition of DPPH was high in ethanol extracts (48.9%) compared to aqueous extracts (19.7%), whereas aqueous extracts showed a higher FRAP value compared to ethanol extracts (0.98 and 0.61mmolFe(II)/100g, respectively). Results on functional properties revealed acceptable water and oil absorption capacities (5.51 and 1.98g/g, respectively), emulsion capacity and stability (15.3% and 6.90%, respectively), and foaming capacity (5.78%). FTIR spectral analysis showed seed flour to encompass major functional groups such as: amines, amides, amino acids, polysaccharides, carboxylic acids, esters and lipids. As belinjau seed flour possesses a rich nutraceutical value, it has high potential to be used as a basic raw material to develop new low cost nutritious functional foods.
Yellow alkaline noodles (YAN) prepared by partial substitution of wheat flour with soy protein isolate and treated with microbial transglutaminase (MTG) and ribose were investigated during cooking. Cooking caused an increase in lightness but a decrease in redness and yellowness, pH, tensile strength and elasticity values of noodles. The extents of these changes were influenced by formulation and cross-linking treatments. The pH and lightness for YAN-ribose were lowest but the yellowness and redness were the highest whilst the tensile strength and elasticity values remained moderate. For YAN-MTG, the color and pH values were moderate, but tensile strength and elasticity values were the highest. YAN prepared with both cross-linking agents had physical values between YAN-ribose and YAN-MTG. Although certain sensory parameters showed differences in score, the overall acceptability of all 10-min-cooked YAN was similar. It is possible to employ cross-linking agents to improve physical properties of cooked YAN.