MyMedR

Displaying publications 61 - 80 of 646 in total

Abstract:

Sort:

Fulltext Trends in Health Communication: Social Media Needs and Quality of Life among Older Adults in Malaysia

Chen HWJ, Marzo RR, Sapa NH, Ahmad A, Anuar H, Baobaid MF, et al.

Healthcare (Basel), 2023 May 17;11(10).
PMID: 37239741 DOI: 10.3390/healthcare11101455

BACKGROUND: While social media continues to dominate, social media platforms have become powerful health communication tools for older users. However, fulfilling their social media needs can be both detrimental and beneficial to their quality of life (QoL). This study assessed social media needs as they relate to QoL among older adults in Malaysia.
METHODS: We conducted a cross-sectional study and adopted convenience sampling to recruit participants. The participants were required to self-report their sociodemographic profile, social media use and needs, and QoL. Social media use and needs were assessed using the Social Networking Sites Uses and Needs (SNSUN) scale, and QoL was assessed using the WHOQOL-BREF questionnaire. Multiple linear regression was performed to identify the predictors of QoL.
RESULTS: The findings revealed that the fulfilment of social integrative needs was the strongest predictor of higher QoL in all domains. However, those using social media for their affective needs demonstrated lower psychological health quality.
CONCLUSIONS: Fulfilling social integrative needs is the key to improving the QoL among older adults. The continuous development of age-friendly applications is essential to keep up with constantly changing social media trends and bridge the gap of social media inequalities. More importantly, it would enable older adults to utilize social media to its fullest potential and enjoy a higher QoL through accessible health communication tools.
Current Trends of Analytical Techniques for Total Alkalinity Measurement in Water Samples: A Review

Ahmad M, Ahmad A, Omar TFT, Mohammad R

Crit Rev Anal Chem, 2023 Apr 13.
PMID: 37052389 DOI: 10.1080/10408347.2023.2199432

Increasing acidity of seawater caused by increasing anthropogenic carbon dioxide absorbed into the seawater attracted the interest of researchers due to increased concern on the deterioration of marine systems and food supply to humans. Total alkalinity (TA) is one of the important parameters in determining carbonate chemistry and is described as the capacity of the sample to neutralize acids. Over the last two decades, many analytical techniques have been developed to determine TA. This article presents a review of different analytical techniques including titration, colorimetric, spectrophotometric, and potentiometric analyses in measuring TA. Among these analytical techniques, potentiometry analysis, which utilizes electrode systems such as glass electrode and ion-selective electrode used as indicator electrodes, is the most used technique. Important features such as principle, limitations, and challenges of the involved technique are discussed in detail.
Classification, processing, and applications of bioink and 3D bioprinting: A detailed review

Raees S, Ullah F, Javed F, Akil HM, Jadoon Khan M, Safdar M, et al.

Int J Biol Macromol, 2023 Mar 31;232:123476.
PMID: 36731696 DOI: 10.1016/j.ijbiomac.2023.123476

With the advancement in 3D bioprinting technology, cell culture methods can design 3D environments which are both, complex and physiologically relevant. The main component in 3D bioprinting, bioink, can be split into various categories depending on the criterion of categorization. Although the choice of bioink and bioprinting process will vary greatly depending on the application, general features such as material properties, biological interaction, gelation, and viscosity are always important to consider. The foundation of 3D bioprinting is the exact layer-by-layer implantation of biological elements, biochemicals, and living cells with the spatial control of the implantation of functional elements onto the biofabricated 3D structure. Three basic strategies underlie the 3D bioprinting process: autonomous self-assembly, micro tissue building blocks, and biomimicry or biomimetics. Tissue engineering can benefit from 3D bioprinting in many ways, but there are still numerous obstacles to overcome before functional tissues can be produced and used in clinical settings. A better comprehension of the physiological characteristics of bioink materials and a higher level of ability to reproduce the intricate biologically mimicked and physiologically relevant 3D structures would be a significant improvement for 3D bioprinting to overcome the limitations.
Psychosocial Risk Factors Associated with Lifetime Amphetamine-Type Stimulants (ATS) Dependence in Drug Detention Centres: Perspectives from the Multiethnicity Study

Mamat R, Rashid RA, Sim MS, Ibrahim B, Wahab S, Ahmad A

J Psychoactive Drugs, 2023 Mar 20.
PMID: 36940284 DOI: 10.1080/02791072.2023.2190331

ATS dependence in Malaysia is growing tremendously across multiracial Malaysian groups, increasing concerns among public health experts and the community. This study highlighted the chronicity of ATS dependence and factors associated with ATS use. Interviewer-administered questionnaires were administered using ASSIST 3.0. A total of N = 327 multiracial people who use ATS were enrolled in this study. The study findings show that 190/327 (58.1%) respondents were ATS dependent. Malays reported the highest number of ATS-dependent (55.8%), followed by Bajau (21.6%) and Kadazan-Dusun (16.8%) ethnic. Across all races, three factors were significantly associated with the ATS dependence: respondents who had a lifetime history of needle sharing aOR = 0.023 (95% CI: 0.003, 0.183) and a lifetime history of heroin use aOR = 0.192 (95% CI: 0.093, 0.396) were at a reduced odd of ATS dependent. Meanwhile, being married reduced the likelihood of becoming dependent on ATS with aOR = 0.378 (95% CI: 0.206, 0.693) compared to being single or divorced. This study revealed that the use of ATS among multiracial Malaysians is alarmingly high, including those in detention centers. Comprehensive harm reduction strategies are urgently needed to prevent the spreading of infectious diseases and other negative health consequences associated with ATS use.
Molecular prevalence of Anaplasma marginale in ruminants and Rhipicephalus ticks in northern Pakistan

Ali S, Hasan M, Ahmad AS, Ashraf K, Khan JA, Rashid MI

Trop Biomed, 2023 Mar 01;40(1):7-13.
PMID: 37355998 DOI: 10.47665/tb.40.1.005

Anaplasma marginale is the most prevalent tick-borne haemoparasite of cattle and causes huge economic losses to the dairy industry worldwide. This study aimed to determine the occurrence of A. marginale infection in blood and tick samples collected from livestock animals in the districts located in Khyber Pakhtunkhwa (KPK), Pakistan. A total of 184 blood and 370 tick samples were included in this study. It has never been reported that sheep, goats, and cattle in Tank, Ghulam Khan, Birmil and Miran Shah areas were infected with A. marginale. All samples of blood and ticks were collected through random sampling from March 2021 to January 2022 from cattle, sheep and goats and screened through PCR for anaplasmosis by using primer pairs of Anaplasma spp. Three hundred and seventy ticks were collected from infested hosts (120/184, 64.21%). Among the four morphologically identified tick species, the highest occurrence was recorded for Rhipicephalus sanguineus (n=138, 37.29%), followed by Rhipicephalus microplus (n=131, 35.4%), Rhipicephalus annulatus (n=40, 10.81%), Hyalomma anatolicum (n=31, 8.37%), and Hyalomma marginatum (n=30, 8.1%). The occurrence of female tick was highest (n=160, 43.24%), followed by nymphs (n=140, 37.38%) and males ticks (n=70, 18.9%). Among these ticks, A. marginale was detected in female ticks of R. microplus, and R. sanguineus. Molecular identification of A. marginale was confirmed in 120 out of 184 blood samples and 6 out of 74 tick samples. Overall, occurrence of A. marginale in blood and tick samples was found to be 65.21% and 8.1% respectively. Species-wise occurrence in blood samples of goats were 71.11% followed by sheep 68.31% and cattle 50%. Specie-wise occurrence of A. marginale in tick samples of cattle were 12.5% followed by goats 6.89%. The obtained sequence showed similarity with A. marginale reported from Kenya and USA. We report the first PCR based detection of A. marginale infection in blood samples and in R. sanguineus ticks of goats simultaneously.
Fulltext Insecticide susceptibility status in two medically important mosquito vectors, Anopheles gambiae, and Culex quinquefasciatus to three insecticides commonly used in Niger State, Nigeria

Kura Shehu I, Ahmad HB, Kayode Olayemi I, Solomon D, Hassan Ahmad A, Salim H

Saudi J Biol Sci, 2023 Feb;30(2):103524.
PMID: 36660609 DOI: 10.1016/j.sjbs.2022.103524

High resistance ability on insecticides among major mosquito vectors of diseases in Nigeria is of growing concern for severe control strategies. The objective of this study was to assess the susceptibility status of females Anopheles gambiae and Culex quinquefasciatus complexes mosquitoes to permethrin (21.5 μg/bottle-pyrethroids), propoxur(12.5 μg/bottle-carbamate) and malathion (50 μg/bottle organophosphate), in Niger State, North-Central, Nigeria. Anopheline and Culecine larvae were collected from the larval habitats of the studied sites (Bosso, Katcha, Lapai, and Shiroro) larvae and pupae were identified guided by standard keys and reared to adults in troughs. Insecticide susceptibility bioassays were performed according to the CDC bottle bioassay standard operating procedures on 3 days old, sugar-fed female Anopheles and Culex mosquitoes. Post-exposure mortality after 24hr and knockdown values for KDT50 were calculated. Knock-down at 1-hour insecticide exposure ranged (84-96 %) permethrin, (94-100 %) propoxur and (100 %) malathion for An. gambiae and (86-97 %) permethrin, (92-100 %) propoxur and (96-100 %) malathion for Cx. quinquefasciatus. Mortality, after 24hr post-exposure was 100 % in malathion, indicating the high effect of the insecticide. Tested samples were found potentially resistant to permethrin recorded against mosquitoes collected from all study sites, in two locations of the study sites to propoxur and one location site to malathion. All the tested mosquitoes were found to be potentially resistant to permethrin, however, mosquitoes tested in Katcha and Shiroro resist potentially to propoxur. Except, Culex quinqufasciatus from Lapai that partially resist malathion, all the tested mosquitoes were found to be susceptible to malathion, across the study sites.
Fulltext A Machine Learning-Based Severity Prediction Tool for the Michigan Neuropathy Screening Instrument

Haque F, Reaz MBI, Chowdhury MEH, Shapiai MIB, Malik RA, Alhatou M, et al.

Diagnostics (Basel), 2023 Jan 11;13(2).
PMID: 36673074 DOI: 10.3390/diagnostics13020264

Diabetic sensorimotor polyneuropathy (DSPN) is a serious long-term complication of diabetes, which may lead to foot ulceration and amputation. Among the screening tools for DSPN, the Michigan neuropathy screening instrument (MNSI) is frequently deployed, but it lacks a straightforward rating of severity. A DSPN severity grading system has been built and simulated for the MNSI, utilizing longitudinal data captured over 19 years from the Epidemiology of Diabetes Interventions and Complications (EDIC) trial. Machine learning algorithms were used to establish the MNSI factors and patient outcomes to characterise the features with the best ability to detect DSPN severity. A nomogram based on multivariable logistic regression was designed, developed and validated. The extra tree model was applied to identify the top seven ranked MNSI features that identified DSPN, namely vibration perception (R), 10-gm filament, previous diabetic neuropathy, vibration perception (L), presence of callus, deformities and fissure. The nomogram's area under the curve (AUC) was 0.9421 and 0.946 for the internal and external datasets, respectively. The probability of DSPN was predicted from the nomogram and a DSPN severity grading system for MNSI was created using the probability score. An independent dataset was used to validate the model's performance. The patients were divided into four different severity levels, i.e., absent, mild, moderate, and severe, with cut-off values of 10.50, 12.70 and 15.00 for a DSPN probability of less than 50, 75 and 100%, respectively. We provide an easy-to-use, straightforward and reproducible approach to determine prognosis in patients with DSPN.
Development of highly-reproducible hydrogel based bioink for regeneration of skin-tissues via 3-D bioprinting technology

Ullah F, Javed F, Mushtaq I, Rahman LU, Ahmed N, Din IU, et al.

Int J Biol Macromol, 2023 Jan 05;230:123131.
PMID: 36610570 DOI: 10.1016/j.ijbiomac.2022.123131

3-D Bioprinting is employed as a novel approach in biofabrication to promote skin regeneration following chronic-wounds and injury. A novel bioink composed of carbohydrazide crosslinked {polyethylene oxide-co- Chitosan-co- poly(methylmethacrylic-acid)} (PEO-CS-PMMA) laden with Nicotinamide and human dermal fibroblast was successfully synthesized via Free radical-copolymerization at 73 °C. The developed bioink was characterized in term of swelling, structural-confirmation by solid state 13C-Nuclear Magnetic Resonance (NMR), morphology, thermal, 3-D Bioprinting via extrusion, rheological and interaction with DNA respectively. The predominant rate of gelation was attributed to the electrostatic interactions between cationic CS and anionic PMMA pendant groups. The morphology of developed bioink presented a porous architecture satisfying the cell and growth-factor viability across the barrier. The thermal analysis revealed two-step degradation with 85 % weight loss in term of decomposition and molecular changes in the bioink moieties By applying low pressure in the range of 25-50 kPa, the optimum reproducibility and printability were determined at 37 °C in the viscosity range of 500-550 Pa. s. A higher survival rate of 92 % was observed for (PEO-CS-PMMA) in comparison to 67 % for pure chitosan built bioink. A binding constant of K ≈ 1.8 × 106 M-1 recognized a thermodynamically stable interaction of (PEO-CS-PMMA) with the Salmon-DNA. Further, the addition of PEO (5.0 %) was addressed with better self-healing and printability to produce skin-tissue constructs to replace the infected skin in human.
Fulltext Determination and risk assessment of pharmaceutical residues in the urban water cycle in Selangor Darul Ehsan, Malaysia

Mohd Hanafiah Z, Wan Mohtar WHM, Abd Manan TS, Bachi NA, Abu Tahrim N, Abd Hamid HH, et al.

PeerJ, 2023;11:e14719.
PMID: 36748091 DOI: 10.7717/peerj.14719

The environmental fate of non-steroidal anti-inflammatory drugs (NSAIDs) in the urban water cycle is still uncertain and their status is mainly assessed based on specific water components and information on human risk assessments. This study (a) explores the environmental fate of NSAIDs (ibuprofen, IBU; naproxen, NAP; ketoprofen, KET; diazepam, DIA; and diclofenac, DIC) in the urban water cycle, including wastewater, river, and treated water via gas chromatography-mass spectrophotometry (GCMS), (b) assesses the efficiency of reducing the targeted NSAIDs in sewage treatment plant (STP) using analysis of variance (ANOVA), and (c) evaluates the ecological risk assessment of these drugs in the urban water cycle via teratogenic index (TI) and risk quotient (RQ). The primary receptor of contaminants comes from urban areas, as a high concentration of NSAIDs is detected (ranging from 5.87 × 103 to 7.18 × 104 ng/L). The percentage of NSAIDs removal in STP ranged from 25.6% to 92.3%. The NAP and KET were still detected at trace levels in treated water, indicating the persistent presence in the water cycle. The TI values for NAP and DIA (influent and effluent) were more than 1, showing a risk of a teratogenic effect. The IBU, KET, and DIC had values of less than 1, indicating the risk of lethal embryo effects. The NAP and DIA can be classified as Human Pregnancy Category C (2.1 > TI ≥ 0.76). This work proved that these drugs exist in the current urban water cycle, which could induce adverse effects on humans and the environment (RQ in high and low-risk categories). Therefore, they should be minimized, if not eliminated, from the primary sources of the pollutant (i.e., STPs). These pollutants should be considered a priority to be monitored, given focus to, and listed in the guideline due to their persistent presence in the urban water cycle.
Fulltext Effect of diet-induced weight loss on iron status and its markers among young women with overweight/obesity and iron deficiency anemia: a randomized controlled trial

Alshwaiyat NM, Ahmad A, Al-Jamal HAN

Front Nutr, 2023;10:1155947.
PMID: 37284649 DOI: 10.3389/fnut.2023.1155947

INTRODUCTION: Obesity and iron deficiency are prevalent health problems that affect billions of people all over the world. Obesity is postulated to relate to iron deficiency via reduced intestinal iron absorption due to increased serum hepcidin level, which is mediated by chronic inflammation. Weight loss in individuals with overweight or obesity and iron deficiency anemia is believed to be associated with an improvement in iron status however the evidence from clinical trials is scarce. This study was conducted to evaluate the effect of diet-induced weight loss on iron status and its markers among young women with overweight/obesity and iron deficiency anemia.
METHODS: The study design was a single-blinded, randomized controlled trial with two parallel arms (weight loss intervention vs control). Study participants were recruited using the convenience sampling method through public advertisements posted and disseminated through social media. Interested and potential participants were asked to visit the Diet Clinic for eligibility screening. A total of 62 women were recruited and randomized into weight loss intervention and control group. The intervention duration was three months. The intervention group received individual consultation sessions with the dietitian and tailored energy-restricted diets. Physical activity levels, dietary intake, anthropometric measurements and clinical markers were measured at baseline and end of the trial.
RESULTS: There was a significant decrease (p < 0.001) in body weight of the intervention group (-7.4 ± 2.7 kg) that was associated with significant improvements in iron status and its markers (p < 0.01). The intervention group experienced a significant increase in hemoglobin (0.5 ± 0.6 g/dL), serum ferritin (5.6 ± 5.8 ng/mL), and serum iron (13.0 ± 16.2 µg/dL), and a significant decrease in high-sensitivity C-reactive protein (-5.2 ± 5.6 mg/L), and serum hepcidin level (-1.9 ± 2.2 ng/mL) at the end of the trial.
CONCLUSION: Our findings indicate that diet-induced weight loss among participants was associated with an improvement in iron status and its related clinical markers.
CLINICAL TRIAL REGISTRATION: [https://www.thaiclinicaltrials.org/show/TCTR20221009001], identifier [TCTR20221009001].
A Qualitative Exploration of Weight Loss Experiences through Hypnotherapy

Roslim NA, Ahmad A, Mansor M, Aung MMT, Hamzah F, Lua PL

Int J Clin Exp Hypn, 2023;71(3):235-249.
PMID: 37378644 DOI: 10.1080/00207144.2023.2227237

Hypnotherapy has been gaining recognition as an alternative treatment for excess weight problems. This qualitative study aims to explore individuals' experiences of losing weight through hypnotherapy and their perceived barriers and facilitators for healthy lifestyle changes. Semistructured interviews were conducted with 15 participants (11 women and 4 men; mean age of 23 years) who recorded having lost ≥5% weight after undergoing 3 hypnotherapy sessions previously at a public university in Terengganu, Malaysia. Each interview was audiotaped, transcribed, and analyzed using thematic analysis. The themes that emerged were the usefulness of hypnotherapy, barriers, and facilitators of healthy lifestyle changes. All participants contended that hypnotherapy played a role in their weight-loss journey through increased mindful eating and enhanced motivation to make lifestyle modifications. Barriers to healthy lifestyle changes included high costs of healthy foods and lack of support for healthy food sources in social and family settings. Hypnotherapy is essential as an adjunct tool in assisting weight loss. However, additional efforts are needed to improve support in the weight management journey.
Fulltext The utilization of microbes for sustainable food production

Noor-Hassim MB, Ng CL, Teo HM, Azmi WA, Muhamad-Zalan NB, Karim NB, et al.

BioTechnologia (Pozn), 2023;104(2):209-216.
PMID: 37427028 DOI: 10.5114/bta.2023.127209

As the global human population continues to grow, the demand for food rises accordingly. Unfortunately, anthropogenic activities, climate change, and the release of gases from the utilization of synthetic fertilizers and pesticides are causing detrimental effects on sustainable food production and agroecosystems. Despite these challenges, there remain underutilized opportunities for sustainable food production. This review discusses the advantages and benefits of utilizing microbes in food production. Microbes can be used as alternative food sources to directly supply nutrients for both humans and livestock. Additionally, microbes offer higher flexibility and diversity in facilitating crop productivity and agri-food production. Microbes function as natural nitrogen fixators, mineral solubilizers, nano-mineral synthesizers, and plant growth regulator inducers, all of which promote plant growth. They are also active organisms in degrading organic materials and remediating heavy metals and pollution in soils, as well as soil-water binders. In addition, microbes that occupy the plant rhizosphere release biochemicals that have nontoxic effects on the host and the environment. These biochemicals could act as biocides in controlling agricultural pests, pathogens, and diseases. Therefore, it is important to consider the use of microbes for sustainable food production.
Azimuthal correlations in Z +jets events in proton-proton collisions at s=13TeV

Tumasyan A, Adam W, Andrejkovic JW, Bergauer T, Chatterjee S, Damanakis K, et al.

Eur Phys J C Part Fields, 2023;83(8):722.
PMID: 37578844 DOI: 10.1140/epjc/s10052-023-11833-z

The production of Z bosons associated with jets is measured in pp collisions at s=13TeV with data recorded with the CMS experiment at the LHC corresponding to an integrated luminosity of 36.3fb-1. The multiplicity of jets with transverse momentum pT>30GeV is measured for different regions of the Z boson's pT(Z), from lower than 10GeV to higher than 100GeV. The azimuthal correlation Δϕ between the Z boson and the leading jet, as well as the correlations between the two leading jets are measured in three regions of pT(Z). The measurements are compared with several predictions at leading and next-to-leading orders, interfaced with parton showers. Predictions based on transverse-momentum dependent parton distributions and corresponding parton showers give a good description of the measurement in the regions where multiple parton interactions and higher jet multiplicities are not important. The effects of multiple parton interactions are shown to be important to correctly describe the measured spectra in the low pT(Z) regions.
Measurement of the mass dependence of the transverse momentum of lepton pairs in Drell-Yan production in proton-proton collisions at s=13TeV

Tumasyan A, Adam W, Andrejkovic JW, Bergauer T, Chatterjee S, Dragicevic M, et al.

Eur Phys J C Part Fields, 2023;83(7):628.
PMID: 37471210 DOI: 10.1140/epjc/s10052-023-11631-7

The double differential cross sections of the Drell-Yan lepton pair (ℓ+ℓ-, dielectron or dimuon) production are measured as functions of the invariant mass mℓℓ, transverse momentum pT(ℓℓ), and φη∗. The φη∗ observable, derived from angular measurements of the leptons and highly correlated with pT(ℓℓ), is used to probe the low-pT(ℓℓ) region in a complementary way. Dilepton masses up to 1TeV are investigated. Additionally, a measurement is performed requiring at least one jet in the final state. To benefit from partial cancellation of the systematic uncertainty, the ratios of the differential cross sections for various mℓℓ ranges to those in the Z mass peak interval are presented. The collected data correspond to an integrated luminosity of 36.3fb-1 of proton-proton collisions recorded with the CMS detector at the LHC at a centre-of-mass energy of 13TeV. Measurements are compared with predictions based on perturbative quantum chromodynamics, including soft-gluon resummation.
Fulltext CMS pythia 8 colour reconnection tunes based on underlying-event data

Tumasyan A, Adam W, Andrejkovic JW, Bergauer T, Chatterjee S, Damanakis K, et al.

Eur Phys J C Part Fields, 2023;83(7):587.
PMID: 37440247 DOI: 10.1140/epjc/s10052-023-11630-8

New sets of parameter tunes for two of the colour reconnection models, quantum chromodynamics-inspired and gluon-move, implemented in the pythia 8 event generator, are obtained based on the default CMS pythia 8 underlying-event tune, CP5. Measurements sensitive to the underlying event performed by the CMS experiment at centre-of-mass energies s=7 and 13TeV, and by the CDF experiment at 1.96TeV are used to constrain the parameters of colour reconnection models and multiple-parton interactions simultaneously. The new colour reconnection tunes are compared with various measurements at 1.96, 7, 8, and 13TeV including measurements of the underlying-event, strange-particle multiplicities, jet substructure observables, jet shapes, and colour flow in top quark pair (tt¯) events. The new tunes are also used to estimate the uncertainty related to colour reconnection modelling in the top quark mass measurement using the decay products of tt¯ events in the semileptonic channel at 13TeV.
A search for decays of the Higgs boson to invisible particles in events with a top-antitop quark pair or a vector boson in proton-proton collisions at s=13TeV

Tumasyan A, Adam W, Andrejkovic JW, Bergauer T, Chatterjee S, Damanakis K, et al.

Eur Phys J C Part Fields, 2023;83(10):933.
PMID: 37855556 DOI: 10.1140/epjc/s10052-023-11952-7

A search for decays to invisible particles of Higgs bosons produced in association with a top-antitop quark pair or a vector boson, which both decay to a fully hadronic final state, has been performed using proton-proton collision data collected at s=13TeV by the CMS experiment at the LHC, corresponding to an integrated luminosity of 138fb-1. The 95% confidence level upper limit set on the branching fraction of the 125GeV Higgs boson to invisible particles, B(H→inv), is 0.54 (0.39 expected), assuming standard model production cross sections. The results of this analysis are combined with previous B(H→inv) searches carried out at s=7, 8, and 13TeV in complementary production modes. The combined upper limit at 95% confidence level on B(H→inv) is 0.15 (0.08 expected).
Fulltext Harnessing the power of AI: Advanced deep learning models optimization for accurate SARS-CoV-2 forecasting

Tariq MU, Ismail SB, Babar M, Ahmad A

PLoS One, 2023;18(7):e0287755.
PMID: 37471397 DOI: 10.1371/journal.pone.0287755

The pandemic has significantly affected many countries including the USA, UK, Asia, the Middle East and Africa region, and many other countries. Similarly, it has substantially affected Malaysia, making it crucial to develop efficient and precise forecasting tools for guiding public health policies and approaches. Our study is based on advanced deep-learning models to predict the SARS-CoV-2 cases. We evaluate the performance of Long Short-Term Memory (LSTM), Bi-directional LSTM, Convolutional Neural Networks (CNN), CNN-LSTM, Multilayer Perceptron, Gated Recurrent Unit (GRU), and Recurrent Neural Networks (RNN). We trained these models and assessed them using a detailed dataset of confirmed cases, demographic data, and pertinent socio-economic factors. Our research aims to determine the most reliable and accurate model for forecasting SARS-CoV-2 cases in the region. We were able to test and optimize deep learning models to predict cases, with each model displaying diverse levels of accuracy and precision. A comprehensive evaluation of the models' performance discloses the most appropriate architecture for Malaysia's specific situation. This study supports ongoing efforts to combat the pandemic by offering valuable insights into the application of sophisticated deep-learning models for precise and timely SARS-CoV-2 case predictions. The findings hold considerable implications for public health decision-making, empowering authorities to create targeted and data-driven interventions to limit the virus's spread and minimize its effects on Malaysia's population.
Anticancer potential of Cu(II)prolinedithiocarbamate complex: design, synthesis, spectroscopy, molecular docking, molecular dynamic, ADMET, and in-vitro studies

Irfandi R, Raya I, Ahmad A, Fudholi A, Santi S, Puspa Azalea W, et al.

J Biomol Struct Dyn, 2023;41(22):12938-12950.
PMID: 36690606 DOI: 10.1080/07391102.2023.2169764

Breast cancer continues to be a major health issue for women all over the world. Cancer medications like cisplatin, which are widely used, still have negative side effects. The novel complex was created as a potential anticancer medication candidate that is both effective and safe, with few side effects. The Cu(II) complex using the prolinedithiocarbamate ligands was synthesized in situ. The Cu(II) complexes Characterization by UV-Vis, FT-IR spectroscopy and melting point determination, conductivity, and HOMO-LUMO were studied. Computational NMR spectrum analysis was performed. The interaction of Cu(II)prolineditiocarbamate complex with cancer cell target protein (MCF-7) was confirmed by molecular docking and molecular dynamic. The pharmacokinetic/ADMET properties were also performed on the complex. Results of the cytotoxic complex test against cancer cells (MCF-7) undergoing apoptosis with an IC50 value of 13.64 µg/mL showed high anticancer activity in MCF-7 cancer cells. The in-vivo data for Cu(II)prolineditiocarbamate complex was predicted using the Protox online tool with an LD50 value of 2500 mg/kg and belonging to the GHS toxicity class 5, which means the compound has a low acute toxicity effect. The Cu(II) prolineitiocarbamate complex may pave the way for the development of essential metal-based chemotherapy for the treatment of breast cancer.Communicated by Ramaswamy H. Sarma.
Measurement of the top quark mass using a profile likelihood approach with the lepton + jets final states in proton-proton collisions at s=13TeV

Tumasyan A, Adam W, Andrejkovic JW, Bergauer T, Chatterjee S, Damanakis K, et al.

Eur Phys J C Part Fields, 2023;83(10):963.
PMID: 37906635 DOI: 10.1140/epjc/s10052-023-12050-4

The mass of the top quark is measured in 36.3fb-1 of LHC proton-proton collision data collected with the CMS detector at s=13TeV. The measurement uses a sample of top quark pair candidate events containing one isolated electron or muon and at least four jets in the final state. For each event, the mass is reconstructed from a kinematic fit of the decay products to a top quark pair hypothesis. A profile likelihood method is applied using up to four observables per event to extract the top quark mass. The top quark mass is measured to be 171.77±0.37GeV. This approach significantly improves the precision over previous measurements.
Fulltext The Relationship between Corporate Social Responsibility on Social Media and Brand Advocacy Behavior of Customers in the Banking Context

Huang S, Hai X, Adam NA, Fu Q, Ahmad A, Zapodeanu D, et al.

Behav Sci (Basel), 2022 Dec 29;13(1).
PMID: 36661604 DOI: 10.3390/bs13010032

This research study aims to investigate the relationship between corporate social responsibility (CSR)-related communication on social media and brand advocacy behavior of retail banking customers in a developing country. This study also proposes a dual mediating mechanism of customer engagement and customer-company identification in the above-proposed relationship. The data were collected from retail banking customers with the help of a self-administered questionnaire (n = 356). To test the hypothesized relationships, a theoretical model was developed in this study. For hypothesis testing, we used the structural equation modeling (SEM) technique in AMOS software. The empirical analysis results confirmed our theoretical assumption that the manifestation of CSR-related communication on social media by a bank significantly influenced the advocacy behavior of retail banking customers. Our study also confirmed the mediating function of customer engagement and customer-company identification. The findings of this study offer different implications for the banking sector. For example, our study highlights the critical role of CSR-related communication on social media for meaningful customer-brand relationships by promoting the advocacy behavior of customers.

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links