Displaying publications 61 - 80 of 149 in total

Abstract:
Sort:
  1. Bhardwaj A, Nagandla K, Das Gupta E, Ibrahim S
    MyJurnal
    Workplace learning is essentially informal that is unstructured, unintended and opportunistic from educational view point. Recall of factual knowledge and applying skills is central in workplace so learning becomes meaningful and evidence based. To maximise their learning, the learners must take active participation in their own learning, set goals and march towards achieving these goals. The objective of the teacher at this juncture is obliging to the needs of the learners and of the patients. This review aims to address the teaching and learning theories that impact the workplace learning, factors influencing workplace based learning, identifying opportunities for learning to occur parallel with work and strategies that maximise successful workplace learning.
  2. Santy JE, Kamal J, Abdul-Rashid AH, Ibrahim S
    Malays Orthop J, 2015 Jul;9(2):13-16.
    PMID: 28435603 MyJurnal DOI: 10.5704/MOJ.1507.006
    Percutaneous pinning after closed reduction is commonly used to treat supracondylar fractures of the humerus in children. Minor pin tract infections frequently occur. The aim of this study was to prevent pin tract infections using a rubber stopper to reduce irritation of the skin against the Kirschner (K) wire following percutaneous pinning. Between July 2011 and June 2012, seventeen children with closed supracondylar fracture of the humerus of Gartland types 2 and 3 were treated with this technique. All patients were treated with closed reduction and percutaneous pinning and followed up prospectively. Only one patient, who was a hyperactive child, developed pin tract infection due to softening of the plaster slab. We found using the rubber stopper to be a simple and inexpensive method to reduce pin tract infections following percutaneous pinning.
  3. Lee G, Ibrahim S, Kittappa S, Park H, Park CM
    Ultrason Sonochem, 2018 Jun;44:64-72.
    PMID: 29680629 DOI: 10.1016/j.ultsonch.2018.02.015
    Novel heterostructured β-Bi2O3/Bi2O2CO3 nanoplates (hBN) were synthesized to observe the sonocatalytic degradation of bisphenol A (BPA) (widely used as a model pollutant) under ultrasonic (US) irradiation. Prior to obtaining the hBN, the Bi2O2CO3 micropowder precursor was prepared under hydrothermal conditions and then converted to hBN by increasing the calcination temperature to 300 °C. The synthesized hBN samples were characterized by field emission scanning electron microscope with energy dispersive X-ray analysis (FESEM/EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), ultraviolet-visible spectrophotometer diffuse reflection spectroscopy (UV-vis DRS), and X-ray photoelectron spectroscopy (XPS). The hBN/US system exhibited greater sonocatalytic activity for the degradation of BPA than the US treatment with the single element bismuth oxide, β-Bi2O3 prepared by annealing the Bi2O2CO3 precursor at 400 °C for 1 h. The US frequency and US power intensity in the hBN/US system were the key operating parameters, which were responsible for the complete degradation of BPA during 6 h of reactions. The degradation efficiency of BPA under the US irradiation was positively correlated with the dose of hBN. Our findings indicate that heterostructured hBN can be used as an efficient sonocatalyst for the catalytic degradation of BPA in water and wastewater treatment.
  4. Wong SL, Ibrahim S, Abdul Kadir N, Mohd Salleh S
    Appl Health Econ Health Policy, 2019 10;17(5):641-654.
    PMID: 31093937 DOI: 10.1007/s40258-019-00480-9
    BACKGROUND: High medicines prices are a barrier to medicines access, and their impact is greater in developing countries.

    OBJECTIVE: This study assessed the availability, prices and affordability of medicines in public and private sectors in Malaysia to understand the pharmaceutical environment and guide policy recommendations.

    METHODS: This nationwide cross-sectional study adapted the World Health Organization/Health Action International (WHO/HAI) methodology. A total of 87 premises from both public and private sectors participated in this study. Data on 50 medicines were collected to analyze availability, prices and affordability. Medicine prices were compared against the international reference prices (IRPs), and affordability was assessed by daily income level.

    RESULTS: In the public sector, the average availability of generics (74.8%) was higher than that of the originator brand name products (19.4%). However, in the private sector, the availability of originator brands was higher (52.2%) than generics (49.1%). Procurement prices in the public sector were up to 1.5 times the IRPs, but up to 8.4 times in the private sector. The study also observed large price variation across medicines in the private sector. Median retail mark-ups in private hospitals (generics 166.9%; originators 51.0%) were higher than in retail pharmacies (generics 94.7%; originators 22.4%). Generics were generally affordable, but originator brands were unaffordable.

    CONCLUSION: Current policies on generic medicines need to be strengthened to improve the availability and use of generics in the country. High medicine prices and large price variation in the current free market suggest that coherent pricing policies and regulations are needed to safeguard the accessibility and affordability of medicines for the people.

  5. Arafat MM, Rozali S, Haseeb ASMA, Ibrahim S
    Nanotechnology, 2020 Jan 09.
    PMID: 31918416 DOI: 10.1088/1361-6528/ab69b3
    In this research work, nanowires were grown on brass (Cu - 37.2 wt% Zn) substrate by thermal oxidation process. The substrate was oxidized at temperature ranging from 350-600 °C in the presence of varying concentrations of O2 in N2 (1-100%) flown at a rate of 200 sccm. The oxidized brass surface was characterized by field emission scanning electron microscope (FESEM) equipped with energy dispersive X-ray (EDX) spectroscope and transmission electron microscope (TEM). Four different types of morphological variations such as thin, thick with branches, circular-flake and flat-cone shape were observed during oxidation at different conditions. However, the prevalence of thin, thick morphology with branches was more prominent and found in all growth conditions. The length and diameter of the nanowires were varied from 1-30 µm and 50-500 nm, respectively whereas the length of the branches varied from 1-3 µm. The composition of the nanowires was ZnO possessing of hexagonal wurtzite structure. The selected area diffraction confirms that the nanowires grew along <1 1 0> directions. Based on the results, a stress induced based mechanism is proposed for the growth of ZnO nanowires on Cu - 37.2 wt% Zn substrate.
  6. Choong CE, Ibrahim S, Yoon Y, Jang M
    Ecotoxicol Environ Saf, 2018 Feb;148:142-151.
    PMID: 29040822 DOI: 10.1016/j.ecoenv.2017.10.025
    In this work, palm shell waste powder activated carbon coated by magnesium silicate (PPAC-MS) were synthesized by the impregnation of magnesium silicate (MgSiO3) using economical material (silicon dioxide powder) via mild hydrothermal approach for the first time. As an effective adsorbent, PPAC-MS simultaneously removes BPA and Pb(II) in single and binary mode. Surprisingly, PPAC-MS exhibited a homogeneous thin plate mesh-like structure, as well as meso- and macropores with a high surface area of 772.1m2g-1. Due to its specific morphological characteristics, PPAC-MS had adsorption capacities of Pb(II) as high as 419.9mgg-1 and 408.8mgg-1 in single mode and binary mode based on Freudliuch isotherm model while those for BPA by PPAC-MS were 168.4mgg-1 and 254.7mgg-1 for single mode and binary modes corresponding to Langmuir isotherm model. Experiment results also indicated that the synergistic removal of BPA occurred because the precipitation process of Pb(II) leads to the co-precipitation of BPA with Pb(OH)2 compound. PPAC-MS showed a good reusability for 5 regeneration cycles using Mg(II) solution followed by thermal treatment. Overall, PPAC-MS has a high potential in the treatment process for wastewater containing both toxic heavy metals and emerging pollutants due to its high sorption capacities and reusability.
  7. Mousavi SA, Mehralian M, Khashij M, Ibrahim S
    Environ Technol, 2018 Nov;39(22):2891-2899.
    PMID: 28820045 DOI: 10.1080/09593330.2017.1369578
    The CANON process is a promising method for nitrogen removal in wastewaters with low organic carbon content like reject water. This study investigated the effect of important factors for optimization of the CANON process through inhibition of nitrite-oxidizing bacteria (NOB). In the acclimation period, complete ammonium removal and 43.3% total N removal were obtained at hydraulic retention time of 12 h, temperature of 30°C ± 0.5°C and DO equal to 7-9 mg/L. The effects of air flow rate (AFR) (representative of DO), SRT and C/N were evaluated. Air flow rate was the most important factor for controlling the process, but the effect of SRT was negligible. When AFR was increased from 100 to 500 mL/min, both ammonium removal efficiency (33-43% to 81-83%) and nitrite accumulation (nitritation, 40 mgN/L to 100-120 mgN/L) were increased, but with increasing AFR to 1000 mL/min only ammonium removal efficiency was increased and because of better condition (high DO) for NOBs, nitritation was decreased. C/N had an effect like AFR of 1000 and only increased ammonium removal efficiency and total N removal. With increasing AFR and C/N, both OUR and AUR were increased, but SVI was decreased.
  8. Zomorodian M, Lai SH, Homayounfar M, Ibrahim S, Pender G
    PLoS One, 2017;12(12):e0188489.
    PMID: 29216200 DOI: 10.1371/journal.pone.0188489
    Conflicts over water resources can be highly dynamic and complex due to the various factors which can affect such systems, including economic, engineering, social, hydrologic, environmental and even political, as well as the inherent uncertainty involved in many of these factors. Furthermore, the conflicting behavior, preferences and goals of stakeholders can often make such conflicts even more challenging. While many game models, both cooperative and non-cooperative, have been suggested to deal with problems over utilizing and sharing water resources, most of these are based on a static viewpoint of demand points during optimization procedures. Moreover, such models are usually developed for a single reservoir system, and so are not really suitable for application to an integrated decision support system involving more than one reservoir. This paper outlines a coupled simulation-optimization modeling method based on a combination of system dynamics (SD) and game theory (GT). The method harnesses SD to capture the dynamic behavior of the water system, utilizing feedback loops between the system components in the course of the simulation. In addition, it uses GT concepts, including pure-strategy and mixed-strategy games as well as the Nash Bargaining Solution (NBS) method, to find the optimum allocation decisions over available water in the system. To test the capability of the proposed method to resolve multi-reservoir and multi-objective conflicts, two different deterministic simulation-optimization models with increasing levels of complexity were developed for the Langat River basin in Malaysia. The later is a strategic water catchment that has a range of different stakeholders and managerial bodies, which are however willing to cooperate in order to avoid unmet demand. In our first model, all water users play a dynamic pure-strategy game. The second model then adds in dynamic behaviors to reservoirs to factor in inflow uncertainty and adjust the strategies for the reservoirs using the mixed-strategy game and Markov chain methods. The two models were then evaluated against three performance indices: Reliability, Resilience and Vulnerability (R-R-V). The results showed that, while both models were well capable of dealing with conflict resolution over water resources in the Langat River basin, the second model achieved a substantially improved performance through its ability to deal with dynamicity, complexity and uncertainty in the river system.
  9. Kadar M, Ibrahim S, Razaob NA, Chai SC, Harun D
    Aust Occup Ther J, 2018 02;65(1):63-68.
    PMID: 29315609 DOI: 10.1111/1440-1630.12441
    BACKGROUND/AIM: The Lawton Instrumental Activities of Daily Living Scale is a tool often used to assess independence among elderly at home. Its suitability to be used with the elderly population in Malaysia has not been validated. This current study aimed to assess the validity and reliability of the Lawton Instrumental Activities of Daily Living Scale - Malay Version to Malay speaking elderly in Malaysia.

    METHODS: This study was divided into three phases: (1) translation and linguistic validity involving both forward and backward translations; (2) establishment of face validity and content validity; and (3) establishment of reliability involving inter-rater, test-retest and internal consistency analyses. Data used for these analyses were obtained by interviewing 65 elderly respondents.

    RESULTS: Percentages of Content Validity Index for 4 criteria were from 88.89 to 100.0. The Cronbach α coefficient for internal consistency was 0.838. Intra-class Correlation Coefficient of inter-rater reliability and test-retest reliability was 0.957 and 0.950 respectively.

    CONCLUSIONS: The result shows that the Lawton Instrumental Activities of Daily Living Scale - Malay Version has excellent reliability and validity for use with the Malay speaking elderly people in Malaysia. This scale could be used by professionals to assess functional ability of elderly who live independently in community.

  10. Ibrahim SF, Pickering J, Ramachandran V, Roberts KJ
    Pharm Res, 2022 Dec;39(12):3063-3078.
    PMID: 35778633 DOI: 10.1007/s11095-022-03314-x
    PURPOSE: Development of a quantitative model and associated workflow for predicting the mechanical deformation properties (plastic deformation or cleavage fracture) of organic single crystals from their crystallographic structures using molecular and crystallographic modelling.

    METHODS: Intermolecular synthons, hydrogen bonding, crystal morphology and surface chemistry are modelled using empirical force fields with the data integrated into the analysis of lattice deformation as computed using a statistical approach.

    RESULTS: The approach developed comprises three main components. Firstly, the identification of the likely direction of deformation based on lattice unit cell geometry; secondly, the identification of likely lattice planes for deformation through the calculation of the strength and stereochemistry of interplanar intermolecular interactions, surface plane rugosity and surface energy; thirdly, identification of potential crystal planes for cleavage fracture by assessing intermolecular bonding anisotropy. Pentaerythritol is predicted to fracture by brittle cleavage on the {001} lattice planes by strong in-plane hydrogen-bond interactions in the <110>, whereas pentaerythritol tetranitrate is predicted to deform by plastic deformation through the slip system {110} , with both predictions being in excellent agreement with known experimental data.

    CONCLUSION: A crystallographic framework and associated workflow for predicting the mechanical deformation of molecular crystals is developed through quantitative assessment of lattice energetics, crystal surface chemistry and crystal defects. The potential for the de novo prediction of the mechanical deformation of pharmaceutical materials using this approach is highlighted for its potential importance in the design of formulated drug products process as needed for manufacture by direct compression.

  11. Ibrahim RK, Hayyan M, AlSaadi MA, Hayyan A, Ibrahim S
    Environ Sci Pollut Res Int, 2016 Jul;23(14):13754-88.
    PMID: 27074929 DOI: 10.1007/s11356-016-6457-z
    Global deterioration of water, soil, and atmosphere by the release of toxic chemicals from the ongoing anthropogenic activities is becoming a serious problem throughout the world. This poses numerous issues relevant to ecosystem and human health that intensify the application challenges of conventional treatment technologies. Therefore, this review sheds the light on the recent progresses in nanotechnology and its vital role to encompass the imperative demand to monitor and treat the emerging hazardous wastes with lower cost, less energy, as well as higher efficiency. Essentially, the key aspects of this account are to briefly outline the advantages of nanotechnology over conventional treatment technologies and to relevantly highlight the treatment applications of some nanomaterials (e.g., carbon-based nanoparticles, antibacterial nanoparticles, and metal oxide nanoparticles) in the following environments: (1) air (treatment of greenhouse gases, volatile organic compounds, and bioaerosols via adsorption, photocatalytic degradation, thermal decomposition, and air filtration processes), (2) soil (application of nanomaterials as amendment agents for phytoremediation processes and utilization of stabilizers to enhance their performance), and (3) water (removal of organic pollutants, heavy metals, pathogens through adsorption, membrane processes, photocatalysis, and disinfection processes).
  12. Yong SW, Law SH, Ibrahim S, Mohamad WNW
    Environ Sci Pollut Res Int, 2023 Feb;30(8):20849-20861.
    PMID: 36260231 DOI: 10.1007/s11356-022-23615-3
    ICTs (information and communication technologies) have emerged as a potent new force. Digitalization, modernization, and automation of the manufacturing process are expected to facilitate ICT adoption, resulting in increased genuine environmental concerns. This research aims to examine the impact of ICTs on environmental quality and the relationship between ICTs, environmental quality, and economic growth. Dynamic panel threshold regression was employed, and the sample countries comprised 69 developing countries from 2010 to 2019. The threshold technique will identify the precise threshold value of ICTs and highlights the impacts of ICTs on the environmental quality nexus when above and below the threshold value in developing countries. Empirical evidence suggests that ICTs positively impact environmental quality (CO2) when above the ICTs threshold value. However, ICTs provide a positive but insignificant impact on environmental quality when below the ICTs threshold value of 4.699. Additionally, ICTs affect the economic growth and environmental quality nexus, with increasing economic growth resulting in a decrease in CO2 emissions in developing countries when ICTs are below the threshold value. Thus, the ICTs threshold value should be used to ensure that ICTs adoption promotes sustainable economic growth and resolves environmental degradation issues in developing nations.
  13. Logarajan RD, Nor NM, Ibrahim S, Said R
    Nutrition, 2023 Jul;111:112030.
    PMID: 37172456 DOI: 10.1016/j.nut.2023.112030
    OBJECTIVE: This study aims to assess social determinants of stunting among children aged <5 y within the Malay ethnicity in Malaysia.

    METHODS: This study used data from the National Health and Morbidity Survey 2016: Maternal and Child Health. It includes a sample of 10 686 children, ages 0 to 59 mo, of Malay ethnicity. Height-for-age z score was determined based on the World Health Organization Anthro software. A binary logistic regression model was used to examine the association between the selected social determinants and the occurrence of stunting.

    RESULTS: About 22.5% of children aged <5 y of Malay ethnicity were stunted. For those ages 0 to 23 mo, stunting is more prevalent in boys, in rural areas, and in those who have screen exposure, whereas a reduction of stunting was observed for those children whose mothers work in the private sector and in those who consume formula milk and meat. As for those ages 24 to 59 mo, there was a higher prevalence of stunting for those with self-employed mothers and reduced prevalence in children with hygienic waste disposal practices as well as those who play with toys.

    CONCLUSIONS: The prevalence of stunting among children of Malay ethnicity aged <5 in Malaysia necessitates immediate intervention. It is pertinent to facilitate early identification of those children at risk of stunting for additional care to promote healthy growth.

  14. Mohd-Razali S, Ahmad-Affandi K, Ibrahim S, Abdul-Rashid AH, Abdul-Shukor N
    Malays Orthop J, 2023 Mar;17(1):180-183.
    PMID: 37064633 DOI: 10.5704/MOJ.2303.021
    Purpura fulminans (PF) is a severe clinical manifestation of Neisseria meningitides infection that is associated with high mortality rates in children. Survivors are frequently left with debilitating musculoskeletal sequelae. There is a paucity of reports on the musculoskeletal pathology of purpura fulminans. We report on a 2-year-old boy with purpura fulminans due to meningococcemia. The child developed distal gangrene in both the upper and lower limbs. Amputations were done for both lower limbs. Histological examination of the amputated specimens showed an inflammatory process and features of osteonecrosis. The latest follow-up at the age of 6 years showed a right knee valgus due to asymmetrical growth arrest of the proximal tibia. PF and its complications are challenging to treat and may require a multidisciplinary approach to improve patient's functional ability.
  15. Yin J, Ibrahim S, Mohd NNA, Zhong C, Mao X
    Environ Sci Pollut Res Int, 2024 Jan;31(2):2836-2850.
    PMID: 38063969 DOI: 10.1007/s11356-023-31231-y
    Carbon reduction has become a major challenge for China's economy in its transition toward sustainability. The government has been monitoring the behavior of enterprises through regulations to protect the environment, while green finance has rapidly developed in recent years as a new tool to reduce carbon emissions. Despite these measures, few studies have explored the interaction between these two drivers of carbon reduction. Therefore, this study aimed to examine the impact of green finance and environmental regulations on carbon emissions. To determine whether their coordination can lead to greater carbon reduction, the spatial spillover effect of this impact was also investigated. The results show that green finance can reduce carbon emissions and that the interaction of green finance with environmental regulations plays a significant positive role in reducing carbon emissions. Finally, this study concludes that the carbon reduction effects of green finance and environmental regulations have positive spillover effects on adjacent areas.
  16. Zakaria NZJ, Rozali S, Mubarak NM, Ibrahim S
    PMID: 35194538 DOI: 10.1007/s13399-022-02430-3
    Grown only in humid tropical conditions, the palm tree provides high-quality oil essential for cooking and personal care or biofuel in the energy sector. After the refining process, this demand could cause numerous oil palm biomass waste management problems. However, the emergence of carbon nanomaterials or CNMs could be a great way to put this waste to a good cause. The composition of the palm waste can be used as a green precursor or starting materials for synthesizing CNMs. Hence, this review paper summarizes the recent progress for the CNMs production for the past 10 years. This review paper extensively discusses the method for processing CNMs, chemical vapor deposition, pyrolysis, and microwave by the current synthesis method. The parameters and conditions of the synthesis are also analyzed. The application of the CNMs from palm oil and future recommendations are also highlighted. Generally, this paper could be a handy guide in assisting the researchers in exploring economic yet simple procedures in synthesizing carbon-based nanostructured materials derived from palm oil that can fulfill the required applications.
  17. Ng YH, Chai YC, Mazli N, Jaafar NF, Ibrahim S
    Malays Orthop J, 2024 Mar;18(1):60-65.
    PMID: 38638655 DOI: 10.5704/MOJ.2403.008
    INTRODUCTION: To describe the duration of survival among bone tumour patients with endoprosthesis reconstruction and to determine frequency of implant failure, revision of surgery, and amputation after endoprosthesis reconstruction.

    MATERIALS AND METHODS: A retrospective cross-sectional review of all patients with either primary bone tumour or secondary bone metastases treated with en bloc resection and endoprosthesis reconstruction from January 2008 to December 2020.

    RESULTS: A total of 35 failures were recorded among the 27 (48.2%) patients with endoprostheses. Some of the patients suffered from one to three types of modes of failure on different timelines during the course of the disease. Up to eight patients suffered from more than one type of failure throughout the course of the disease. Out of all modes of failure, local recurrence (type 5 failure) was the most common, accounting for 25.0% of all failure cases. Four patients (7.1%) eventually underwent amputation, which were either due to infection (2 patients) or disease progression causing local recurrence (2 patients).

    CONCLUSION: The overall result of endoprosthesis reconstruction performed in our centre was compatible with other centres around the world. Moreover, limb salvage surgery should be performed carefully in a selected patient group to maximise the benefits of surgery.

  18. Kura NU, Ramli MF, Ibrahim S, Sulaiman WN, Zaudi MA, Aris AZ
    ScientificWorldJournal, 2014;2014:796425.
    PMID: 25574493 DOI: 10.1155/2014/796425
    The existing knowledge regarding seawater intrusion and particularly upconing, in which both problems are linked to pumping, entirely relies on theoretical assumptions. Therefore, in this paper, an attempt is made to capture the effects of pumping on seawater intrusion and upconing using 2D resistivity measurement. For this work, two positions, one perpendicular and the other parallel to the sea, were chosen as profile line for resistivity measurement in the coastal area near the pumping wells of Kapas Island, Malaysia. Subsequently, water was pumped out of two pumping wells simultaneously for about five straight hours. Then, immediately after the pumping stopped, resistivity measurements were taken along the two stationed profile lines. This was followed by additional measurements after four and eight hours. The results showed an upconing with low resistivity of about 1-10 Ωm just beneath the pumping well along the first profile line that was taken just after the pumping stopped. The resistivity image also shows an intrusion of saline water (water enriched with diluted salt) from the sea coming towards the pumping well with resistivity values ranging between 10 and 25 Ωm. The subsequent measurements show the recovery of freshwater in the aquifer and how the saline water is gradually diluted or pushed out of the aquifer. Similarly the line parallel to the sea (L2) reveals almost the same result as the first line. However, in the second and third measurements, there were some significant variations which were contrary to the expectation that the freshwater may completely flush out the saline water from the aquifer. These two time series lines show that as the areas with the lowest resistivity (1 Ωm) shrink with time, the low resistivity (10 Ωm) tends to take over almost the entire area implying that the freshwater-saltwater equilibrium zone has already been altered. These results have clearly enhanced our current understanding and add more scientific weight to the theoretical assumptions on the effects of pumping on seawater intrusion and upconing.
  19. Ghassem M, Fern SS, Said M, Ali ZM, Ibrahim S, Babji AS
    J Food Sci Technol, 2014 Mar;51(3):467-75.
    PMID: 24587521 DOI: 10.1007/s13197-011-0526-6
    This study was conducted to evaluate the kinetic characteristics of proteolytic activity of proteases on Channa striatus protein fractions. Degree of hydrolysis (DH), amino acid composition and kinetic parameters of sarcoplasmic and myofibrillar proteins were investigated when incubated with proteinase K and thermolysin, separately. After 30 min incubation with proteases, a decrease in DH of sarcoplasmic protein was observed whereas, hydrolysis of myofibrillar protein with proteases took 2 h with an increase in DH. The major amino acids were glutamic acid (16.6%) in thermolysin- myofibrillar hydrolysate followed by aspartic acid (11.1%) in sarcoplasmic protein fraction with no enzyme treatment and lysine (10%) in thermolysin-myofibrillar hydrolysate. The apparent Michaelis constant of proteinase K was lower than thermolysin for both sarcoplasmic and myofibrillar proteins. However, rate of turnover and enzyme efficiency suggested that sarcoplasmic and myofibrillar proteins are suitable substrates for proteinase K and thermolysin hydrolytic reaction, respectively.
  20. Bakhshipour Z, Huat BB, Ibrahim S, Asadi A, Kura NU
    ScientificWorldJournal, 2013;2013:629476.
    PMID: 24501583 DOI: 10.1155/2013/629476
    This work describes the application of the electrical resistivity (ER) method to delineating subsurface structures and cavities in Kuala Lumpur Limestone within the Batu Cave area of Selangor Darul Ehsan, Malaysia. In all, 17 ER profiles were measured by using a Wenner electrode configuration with 2 m spacing. The field survey was accompanied by laboratory work, which involves taking resistivity measurements of rock, soil, and water samples taken from the field to obtain the formation factor. The relationship between resistivity and the formation factor and porosity for all the samples was established. The porosity values were plotted and contoured. A 2-dimensional and 3-dimensional representation of the subsurface topography of the area was prepared through use of commercial computer software. The results show the presence of cavities and sinkholes in some parts of the study area. This work could help engineers and environmental managers by providing the information necessary to produce a sustainable management plan in order to prevent catastrophic collapses of structures and other related geohazard problems.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links