Displaying publications 61 - 80 of 163 in total

Abstract:
Sort:
  1. Senanayake C, Senanayake SM
    Comput Methods Biomech Biomed Engin, 2011 Oct;14(10):863-74.
    PMID: 20924859 DOI: 10.1080/10255842.2010.499866
    In this paper, a gait event detection algorithm is presented that uses computer intelligence (fuzzy logic) to identify seven gait phases in walking gait. Two inertial measurement units and four force-sensitive resistors were used to obtain knee angle and foot pressure patterns, respectively. Fuzzy logic is used to address the complexity in distinguishing gait phases based on discrete events. A novel application of the seven-dimensional vector analysis method to estimate the amount of abnormalities detected was also investigated based on the two gait parameters. Experiments were carried out to validate the application of the two proposed algorithms to provide accurate feedback in rehabilitation. The algorithm responses were tested for two cases, normal and abnormal gait. The large amount of data required for reliable gait-phase detection necessitate the utilisation of computer methods to store and manage the data. Therefore, a database management system and an interactive graphical user interface were developed for the utilisation of the overall system in a clinical environment.
    Matched MeSH terms: Computers
  2. Pai YS, Yap HJ, Md Dawal SZ, Ramesh S, Phoon SY
    Sci Rep, 2016 06 07;6:27380.
    PMID: 27271840 DOI: 10.1038/srep27380
    This study presents a modular-based implementation of augmented reality to provide an immersive experience in learning or teaching the planning phase, control system, and machining parameters of a fully automated work cell. The architecture of the system consists of three code modules that can operate independently or combined to create a complete system that is able to guide engineers from the layout planning phase to the prototyping of the final product. The layout planning module determines the best possible arrangement in a layout for the placement of various machines, in this case a conveyor belt for transportation, a robot arm for pick-and-place operations, and a computer numerical control milling machine to generate the final prototype. The robotic arm module simulates the pick-and-place operation offline from the conveyor belt to a computer numerical control (CNC) machine utilising collision detection and inverse kinematics. Finally, the CNC module performs virtual machining based on the Uniform Space Decomposition method and axis aligned bounding box collision detection. The conducted case study revealed that given the situation, a semi-circle shaped arrangement is desirable, whereas the pick-and-place system and the final generated G-code produced the highest deviation of 3.83 mm and 5.8 mm respectively.
    Matched MeSH terms: Computers
  3. Md Rowshon Kamal, Mohd Amin Mohd Soom, Abdul Rashid Mohamed Shariff
    MyJurnal
    A GIS-based user-interface programme was developed to compute the geospatial Water ProductivityIndex (WPI) of a river-fed rice irrigation scheme in Northwest Selangor, Malaysia. The spatial analysisincludes irrigation blocks with sizes ranging from 20 to 300 ha. The amount of daily water use for eachirrigation block was determined using irrigation delivery model and stored in the database for both mainseason (August to December) and off season (February to May). After cut-off of the irrigation supply,a sub-module was used to compute the total water use including rainfall for each irrigation block. Therice yield data for both seasons were obtained from DOA (Department of Agriculture, Malaysia) of thescheme. Then, the Water Productivity Index (WPI) was computed for each irrigation block and spatialthematic map was also generated. ArcObjects and Visual Basic Application (VBA) programminglanguages were used to structure user-interface in the ArcGIS software. The WPI, expressed in termsof crop yield per unit amount of water used (irrigation and effective rainfall), ranged from 0.02 to 0.57kg/m3 in the main season and 0.02 to 0.40 in off season among irrigation blocks, respectively. Thedevelopment of the overall system and the procedure are illustrated using the data obtained from thestudy area. The approach could be used to depict the gaps between the existing and appropriate watermanagement practices. Suitable interventions could be made to fill the gaps and enhance water useefficiency at the field level and also help in saving irrigation water through remedial measures in theseason. The approach could be useful for irrigation managers to rectify and enhance decision-makingin both the management and operation of the next irrigation season.
    Matched MeSH terms: Computers
  4. Lee, S.W., Tan, S.T., Che Ab Aziz, Z.A.
    Ann Dent, 2005;12(1):-.
    MyJurnal
    Thirty extracted mandibular premolars were randomly divided into 3 groups. Canals were cleaned, obturated and the teeth incubated. Guttapercha removal was performed using: Hedström files with xylene (Group 1); ProFile® alone (Group 2) and combination of both (Group 3). Time required to remove the gutta-percha was recorded. Postoperative radiographs were taken. Specimens were split longitudinally and photographed. Amount of gutta-percha left at coronal, middle and apical thirds was calculated by computer (QWIN software) and the photographs were also evaluated visually by two endodontists. Results showed that the combined technique was fastest in removing gutta-percha. Radiographically, more residual was left in Group 2. Although computer analysis also showed more residual was left in Group 2, they were in a small percentage and there were no significant differences (P>0.05, SPSS paired-samples T test) among groups. Although there were significant differences between the two evaluators in their scoring, both generally agreed (Kappa’s analysis= 0.64) there was more guttapercha residual in Group 2 compared to Group 3 in the apical thirds. Although the differences in efficacy of guttapercha removal among these techniques were not significant, the use of ProFile® increased the speed of the procedure. The combined technique showed the most superior efficacy in gutta-percha removal.
    Matched MeSH terms: Computers
  5. Loh, Kok Fook, Ponusamy, Ragu, Shattri Mansor, Jamil Ismail
    MyJurnal
    Malaysia is in the process of modernizing its oil palm plantation management, by implementing geo-information technologies which include Remote Sensing (RS), Geographic Information System (GIS), and Spatial Decision Support System (DSS). Agencies with large oil palm plantations such as the Federal Land Development Authority (FELDA), Federal Land Consolidation and Rehabilitation Authority (FELCRA), Guthrie Sdn. Bhd., and Golden Hope Sdn. Bhd. have already incorporated GIS in their plantation management, with limited use of RS and DSS. In 2005, FELCRA, Universiti Putra Malaysia (UPM) and Espatial Resources Sdn. Bhd. (ESR) collaborated in a research project to explore the potentials of geo-informatics for oil palm plantation management. The research was conducted in FELCRA located in Seberang Perak Oil Palm Scheme. In that research, a tool integrating RS, GIS and Analytical Hierarchy Process (AHP) was developed to support decision making for replanting of the existing old palms. RS was used to extract productive stand per hectare; AHP was used to compute the criteria weights for the development of a suitable model; and GIS was used for spatial modelling so as to generate the decision support layer for replanting. This paper highlights the approach adopted in developing the tool with special emphasis on the AHP computation.
    Matched MeSH terms: Computers
  6. Khairul Anuar Mohd Salleh, Ab. Razak Hamzah, Wan Muhammad Saridan Wan Hassan
    MyJurnal
    Developments of computer technology and image processing have shifted conventional industrial radiography application to industrial digital radiography (IDR) system. In this study, two types of IDR modules for non destructive testing (NDT), namely drum- and laser- type film digitizer with 50 μm pixel pitch have been evaluated for NDT applications. The modulation transfer function (MTF) and noise power spectrum (NPS) measurement were adapted to evaluate the image quality of IDR images. Results shown the averaged MTF for drum- and laser- type film digitizer at 20% modulation were 6.15 cycles/mm and 6.55 cycles/mm respectively. For NPS measurement and calculation, the result obtained shows that drum type film digitizer produced higher noise then laser type film digitizer. The study shows that the laser type film digitizer is the best system to be used for film digitization purposes because the MTF result shows that it modulates better than drum type and has the lowest and stable NPS.
    Matched MeSH terms: Computers
  7. Mohamed Ibrahim J. Ibrahim, Mohd Zuhri Mohamed Yusoff
    MyJurnal
    This study presents an investigation about the effect of size variation on mechanical
    performance of square core interlocking structures, by using finite element analysis
    (FEA). The material used in this study is flax fibre reinforced polypropylene (PP)
    composite. Abaqus software was used for modelling and visualizing number of six
    interlocking honeycomb structures with different cell sizes and heights. In the first
    analysis, Abaqus/standard was performed on the perfect models by applying quasistatic
    loading to identify the imperfection shape and obtaining the buckling Eigenmodes
    for the models, then the Eigen-modes from abaqus/standard were imported
    to abaqus/explicit to run post-buckling analysis and simulate the overall imperfection
    behaviour of models. The numerical results from the finite element analysis
    simulation were used to plot load-displacement curve to each model. The area under
    the load-displacement curve represents the total absorbed energy, energy absorption
    per unit mass indicates the specific energy absorption, and the highest value of
    specific energy absorption represents the optimum size. The findings demonstrated
    that the square interlocking structure exhibits good energy absorption performance
    in some geometrical cases, and also revealed that the natural fibre composites have
    unique energy absorption capability under quasi-static loads.
    Matched MeSH terms: Computers
  8. Oh YH, See J, Le Ngo AC, Phan RC, Baskaran VM
    Front Psychol, 2018;9:1128.
    PMID: 30042706 DOI: 10.3389/fpsyg.2018.01128
    Over the last few years, automatic facial micro-expression analysis has garnered increasing attention from experts across different disciplines because of its potential applications in various fields such as clinical diagnosis, forensic investigation and security systems. Advances in computer algorithms and video acquisition technology have rendered machine analysis of facial micro-expressions possible today, in contrast to decades ago when it was primarily the domain of psychiatrists where analysis was largely manual. Indeed, although the study of facial micro-expressions is a well-established field in psychology, it is still relatively new from the computational perspective with many interesting problems. In this survey, we present a comprehensive review of state-of-the-art databases and methods for micro-expressions spotting and recognition. Individual stages involved in the automation of these tasks are also described and reviewed at length. In addition, we also deliberate on the challenges and future directions in this growing field of automatic facial micro-expression analysis.
    Matched MeSH terms: Computers
  9. Jamal A, Hazim Alkawaz M, Rehman A, Saba T
    Microsc Res Tech, 2017 Jul;80(7):799-811.
    PMID: 28294460 DOI: 10.1002/jemt.22867
    With an increase in the advancement of digital imaging and computing power, computationally intelligent technologies are in high demand to be used in ophthalmology cure and treatment. In current research, Retina Image Analysis (RIA) is developed for optometrist at Eye Care Center in Management and Science University. This research aims to analyze the retina through vessel detection. The RIA assists in the analysis of the retinal images and specialists are served with various options like saving, processing and analyzing retinal images through its advanced interface layout. Additionally, RIA assists in the selection process of vessel segment; processing these vessels by calculating its diameter, standard deviation, length, and displaying detected vessel on the retina. The Agile Unified Process is adopted as the methodology in developing this research. To conclude, Retina Image Analysis might help the optometrist to get better understanding in analyzing the patient's retina. Finally, the Retina Image Analysis procedure is developed using MATLAB (R2011b). Promising results are attained that are comparable in the state of art.
    Matched MeSH terms: Computers
  10. Othman A, Umar R, Gopir G
    In the past, simulating charge dynamics in solid state devices, such as current mobility, transient current drift velocities are done on mainframe systems or on high performance computing facilities. This is due to the fact that, such simulations are costly in terms of computational requirements when implemented on a single processor-based personal computers (PCs). When simulating charge dynamics, large ensembles of particles are usually preferred, such as exceeding 40000 particles, to ensure a numerically sound result. When implementing this type of simulation on a single processor PCs using the conventional ensemble or single particle Monte Carlo method, the computational time is very long even on the fast 2.0 MHz PCs. Lately, a more efficient, easily made available tools and cost effective solution to this problem is the application of an array of PCs employed in a parallel application. This is done using a computer cluster network in a master-slave model. In this paper we report the development of a LINUX cluster for the purpose of implementing parallel ensemble Monte Carlo modelling for solid states device. We have proposed the use of Parallel Virtual Machine (PVM) standards when running the parallel algorithm of the ensemble MC simulation. Some results of the development are also presented in this paper.
    Matched MeSH terms: Computers; Microcomputers
  11. Aliteh NA, Minakata K, Tashiro K, Wakiwaka H, Kobayashi K, Nagata H, et al.
    Sensors (Basel), 2020 Jan 23;20(3).
    PMID: 31979252 DOI: 10.3390/s20030637
    Oil palm ripeness' main evaluation procedure is traditionally accomplished by human vision. However, the dependency on human evaluators to grade the ripeness of oil palm fresh fruit bunches (FFBs) by traditional means could lead to inaccuracy that can cause a reduction in oil palm fruit oil extraction rate (OER). This paper emphasizes the fruit battery method to distinguish oil palm fruit FFB ripeness stages by determining the value of load resistance voltage and its moisture content resolution. In addition, computer vision using a color feature is tested on the same samples to compare the accuracy score using support vector machine (SVM). The accuracy score results of the fruit battery, computer vision, and a combination of both methods' accuracy scores are evaluated and compared. When the ripe and unripe samples were tested for load resistance voltage ranging from 10 Ω to 10 kΩ, three resistance values were shortlisted and tested for moisture content resolution evaluation. A 1 kΩ load resistance showed the best moisture content resolution, and the results were used for accuracy score evaluation comparison with computer vision. From the results obtained, the accuracy scores for the combination method are the highest, followed by the fruit battery and computer vision methods.
    Matched MeSH terms: Computers
  12. Adeyemi IR, Razak SA, Salleh M, Venter HS
    PLoS One, 2016;11(12):e0166930.
    PMID: 27918593 DOI: 10.1371/journal.pone.0166930
    Comprehension of the statistical and structural mechanisms governing human dynamics in online interaction plays a pivotal role in online user identification, online profile development, and recommender systems. However, building a characteristic model of human dynamics on the Internet involves a complete analysis of the variations in human activity patterns, which is a complex process. This complexity is inherent in human dynamics and has not been extensively studied to reveal the structural composition of human behavior. A typical method of anatomizing such a complex system is viewing all independent interconnectivity that constitutes the complexity. An examination of the various dimensions of human communication pattern in online interactions is presented in this paper. The study employed reliable server-side web data from 31 known users to explore characteristics of human-driven communications. Various machine-learning techniques were explored. The results revealed that each individual exhibited a relatively consistent, unique behavioral signature and that the logistic regression model and model tree can be used to accurately distinguish online users. These results are applicable to one-to-one online user identification processes, insider misuse investigation processes, and online profiling in various areas.
    Matched MeSH terms: Computers
  13. Karim A, Salleh R, Khan MK
    PLoS One, 2016;11(3):e0150077.
    PMID: 26978523 DOI: 10.1371/journal.pone.0150077
    Botnet phenomenon in smartphones is evolving with the proliferation in mobile phone technologies after leaving imperative impact on personal computers. It refers to the network of computers, laptops, mobile devices or tablets which is remotely controlled by the cybercriminals to initiate various distributed coordinated attacks including spam emails, ad-click fraud, Bitcoin mining, Distributed Denial of Service (DDoS), disseminating other malwares and much more. Likewise traditional PC based botnet, Mobile botnets have the same operational impact except the target audience is particular to smartphone users. Therefore, it is import to uncover this security issue prior to its widespread adaptation. We propose SMARTbot, a novel dynamic analysis framework augmented with machine learning techniques to automatically detect botnet binaries from malicious corpus. SMARTbot is a component based off-device behavioral analysis framework which can generate mobile botnet learning model by inducing Artificial Neural Networks' back-propagation method. Moreover, this framework can detect mobile botnet binaries with remarkable accuracy even in case of obfuscated program code. The results conclude that, a classifier model based on simple logistic regression outperform other machine learning classifier for botnet apps' detection, i.e 99.49% accuracy is achieved. Further, from manual inspection of botnet dataset we have extracted interesting trends in those applications. As an outcome of this research, a mobile botnet dataset is devised which will become the benchmark for future studies.
    Matched MeSH terms: Computers; Microcomputers
  14. Ambusam S, Baharudin O, Roslizawati N, Leonard J
    Clin Ter, 2015 Nov-Dec;166(6):256-61.
    PMID: 26794814 DOI: 10.7417/CT.2015.1898
    Document holder is used as a remedy to address occupational neck pain among computer users. An understanding on the effects of the document holder along with other work related risk factors while working in computer workstation requires attention. A comprehensive knowledge on the optimal location of the document holder in computer use and associated work related factors that may contribute to neck pain reviewed in this article. A literature search has been conducted over the past 14 years based on the published articles from January 1990 to January 2014 in both Science Direct and PubMed databases. Medical Subject Headings (MeSH) keywords for search were neck muscle OR head posture OR muscle tension' OR muscle activity OR work related disorders OR neck pain AND/OR document location OR document holder OR source document OR copy screen holder.Document holder placed lateral to the screen was most preferred to reduce neck discomfort among occupational typists. Document without a holder was placed flat on the surface is least preferred. The head posture and muscle activity increases when the document is placed flat on the surface compared to when placed on the document holder. Work related factors such as static posture, repetitive movement, prolong sitting and awkward positions were the risk factors for chronic neck pain. This review highlights the optimal location for document holder for computer users to reduce neck pain. Together, the importance of work related risk factors for to neck pain on occupational typist is emphasized for the clinical management.
    Matched MeSH terms: Computers
  15. Shahabudin SH, Safiah N
    Med Teach, 1991;13(3):205-11.
    PMID: 1745110
    Three years ago the Universiti Kebangsaan Malaysia medical school changed its curriculum from the traditional discipline based curriculum to the integrated organ-system approach. Once change was effected a process of 'refreezing' had to be initiated whereby new responses had to be reintegrated into the ongoing personality or emotional relationships of important people so that the change process will endure and become stable. During this refreezing process the faculty encountered several problems which could thwart further development of the new curricula if left unresolved. The nature of the problems seemed to indicate that curricular change involves more than just efforts at bettering the what and ways of student learning and assessment. A lot of energy was also spent on keeping things going, keeping people motivated, making sure the work was done (at least as well as it has in the past), looking for better ways to do things, weighing new solutions and to be alert to new problems. In ensuring the continuance of change it was important to ensure, from the outset the institutionalization of policies, programmes, procedures and practices for continuing reward, routinization, structural integration into the system, continuing evaluation and providing for continuing maintenance.
    Matched MeSH terms: Computers
  16. Asfahani J, Samuding K, Mostapa R, Othman O
    Appl Radiat Isot, 2021 Jan;167:109296.
    PMID: 33022484 DOI: 10.1016/j.apradiso.2020.109296
    Natural gamma ray well logging technique is used to characterize the radioactivity (GR) laterally and vertically in Banting district, SW of Malaysia. Seven drilled boreholes, along N-S profile with their natural gamma ray records are utilized to compute the heat production (HP) parameter, based on the Bucker and Rybach relationship.The analysis of 3467 measured points in those boreholes indicates that GR varies between 6.24 API and 358.4 API with an average of 79.95 API, while HP varies between 0.086 and 5.65 μw/m3 with an average of 1.25 μw/m3.The multi-fractal Concentration-Number (C-N) is used to characterize the radioactivity and heat production variations and to isolate different GR and HP populations in the study region. The high radioactivity and heat production ranges are mainly related to the silty clay layers, accompanied by uranium and thorium.
    Matched MeSH terms: Computers
  17. Sajid MR, Muhammad N, Zakaria R, Bukhari SAC
    J Public Health Res, 2020 Oct 14;9(4):1893.
    PMID: 33244464 DOI: 10.4081/jphr.2020.1893
    Background: Modifiable risk factors are associated with cardiovascular mortality (CVM) which is a leading form of global mortality. However, diverse nature of urbanization and its objective measurement can modify their relationship. This study aims to investigate the moderating role of urbanization in the relationship of combined exposure (CE) of modifiable risk factors and CVM. Design and Methods: This is the first comprehensive study which considers different forms of urbanization to gauge its manifold impact. Therefore, in addition to existing original quantitative form and traditional two categories of urbanization, a new form consisted of four levels of urbanization was duly introduced. This study used data of 129 countries mainly retrieved from a WHO report, Non-Communicable Diseases Country Profile 2014. Factor scores obtained through confirmatory factor analysis were used to compute the CE. Age-income adjusted regression model for CVM was tested as a baseline with three bootstrap regression models developed for the three forms of urbanization. Results: Results revealed that the CE and CVM baseline relationship was significantly moderated through the original quantitative form of urbanization. Contrarily, the two traditional categories of urbanization could not capture the moderating impact. However, the four levels of urbanization were objectively estimated the urbanization impact and subsequently indicated that the CE was more alarming in causing the CVM in levels 2 and 3 urbanized countries, mainly from low-middle-income countries. Conclusion: This study concluded that the urbanization is a strong moderator and it could be gauged effectively through four levels whereas sufficiency of two traditional categories of urbanization is questionable.
    Matched MeSH terms: Computers
  18. Norsyafiqah Mohamad, Masnita Misiran, Zahayu Md Yusof
    MyJurnal
    Businesses adopt queuing mechanism as it can improve efficiency and provide economic use of
    resources. Some business segment that normally adapted queuing theory include assessing staff
    scheduling, productivity, performance, and customers waiting time. This article will adopt queuing
    theory to current service provided by Department of Labour, Kuala Terengganu. As the department is
    committed to provide quality services to its customer, the level of satisfaction and current queueing
    time need to be investigated. To achieve this, four elements in queueing theory – arrival rate, the
    queuing discipline, the service and also the cost structure are utilized. Arrival rate is measured as way
    in which customer arrives at this department and entered for receiving a service. Single server queuing
    model is known as infinite queue length model (exponential service) was used in this study. This model
    is based on certain assumptions about queuing, as the arrivals are described by Poisson probability
    distribution and arrive from infinite population. This study has demonstrated that, majority of the
    customers are dissatisfied with services offered and the major cause of dissatisfaction is the long waiting
    time. Sunday shows the busiest day at Department of Labour, Kuala Terengganu when there are too
    many customers and duty officer faced a hectic day on Sunday, followed by Thursday and Wednesday.
    Department of Labour, Kuala Terengganu needed to do the other internal procedures for reducing
    waiting times and thus ensuring an effective services system. This study recommended of adding a new
    checkout counter and hiring another employee to help duty officer improve the operation at Department
    of Labour, Kuala Terengganu.
    Matched MeSH terms: Computers
  19. Hendrickson WA, Ward KB
    Biochem Biophys Res Commun, 1975 Oct 27;66(4):1349-56.
    PMID: 5
    Matched MeSH terms: Computers
  20. Hussin, K., Hassan, M.R., Hamzah, M.L., Fadzli, A., Nik Mohamad, N.A., Nik Him, N.A.S.
    MyJurnal
    The importance of rapid ambulance response to emergency medical crises is undeniable. An early
    access to advanced care is crucial to saving a life. Modern computerised call centre and the hospitalbased ambulance services are believed to enhance the quality of service delivery. However, whether
    it will further reduce the ambulance response time is still debatable. A cross-sectional study was
    conducted in June 2012 until July 2012 at three selected tertiary hospitals in Malaysia. The
    ambulance response time was expressed in a median and interquartile range (IQR) and MannWhitney U test was used to determine the associations between types of ambulance and
    computerised call centre system versus voice only. Wilcoxon Rank Sign Test was used to assess
    the significance of means difference. A hospital-based ambulance had the median time of 0.19
    minutes while community-based ambulance had the median time of 0.20 minutes (The Z score -
    0.916, p-value - 0.360). The hospital with computer call centre had the median time of 0.19 minutes
    while hospital without computer call centre had the median of 0.20 minutes (The Z score - 0.816, P
    value - 0.414).The response time of hospital-based ambulance equipped with computerised call
    centre system was comparable in three selected tertiary hospitals in Malaysia.
    Matched MeSH terms: Computers
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links