A β-cyclodextrin (β-Cyd) inclusion complex containing azomethine as a guest was prepared by kneading method with aliquot addition of ethanol. The product was characterized by Fourier Transform Infrared (FTIR) spectrometer, 1H Nuclear Magnetic Resonance (1H NMR) and Thermogravimetric Analyzer (TGA), which proves the formation of the inclusion complex where the benzyl part of azomethine has been encapsulated by the hydrophobic cavity of β-Cyd. The interaction of β-Cyd and azomethine was also analyzed by means of spectrometry by UV-Vis spectrophotometer to determine the formation constant. The formation constant was calculated by using a modified Benesi-Hildebrand equation at 25 °C. The apparent formation constant obtained was 1.29 × 104 L/mol. Besides that, the stoichiometry ratio was also determined to be 1:1 for the inclusion complex of β-Cyd with azomethine.
Common beans (Phaseolus vulgaris L.) are widely consumed as a source of proteins and natural products. However, its yield needs to be increased. In line with the agenda of Phaseomics (an international consortium), work of expressed sequence tags (ESTs) generation from bean pods was initiated. Altogether, 5972 ESTs have been isolated. Alcohol dehydrogenase (AD) encoding gene cDNA was a noticeable transcript among the generated ESTs. This AD is an important enzyme; therefore, to understand more about it this study was undertaken.
This work aimed to study the application of liquid biphasic flotation (LBF) for the efficient and rapid recovery of astaxanthin from H. pluvialis microalgae. The performance of LBF for the extraction of astaxanthin was studied comprehensively under different operating conditions, including types and concentrations of food-grade alcohol and salt, volume ratio, addition of neutral salt, flotation period, and mass of dried H. pluvialis biomass powder. The maximum recovery, extraction efficiency and partition coefficient of astaxanthin obtained from the optimum LBF system were 95.11 ± 1.35%, 99.84 ± 0.05% and 385.16 ± 3.87, respectively. A scaled-up LBF system was also performed, demonstrating the feasibility of extracting natural astaxanthin from microalgae at a larger scale. This exploration of LBF system opens a promising avenue to the extraction of astaxanthin at lower cost and shorter processing time.
Alcohol consumption has consequences for the health and quality of life of individuals and communities. It is a problem among some of the Indigenous groups of Sabah and Sarawak with some of the highest prevalence of risky drinking in Malaysia. Alcohol is considered to be part of the culture of some of these Indigenous groups and a way to maintain the connection to their culture and traditions. However, drinking too much on a single occasion and drinking regularly over time is not a part of the culture. Therefore, this study aimed to investigate the positive and negative effects of alcohol on quality of life (QoL) of an Indigenous community of Sabah. A total of 56 villagers from the West Coast Division of Sabah were interviewed in focus group discussions using the diamond dialogue tool. Data were analysed using thematic analysis and revealed that alcohol consumption has both beneficial and adverse effects on health, behavioural, social, economic and psychological factors, depending on the drinking patterns. These harmful results suggest that awareness and harm-reduction programmes may help to empower the Indigenous groups of Sabah to reduce alcohol-related harm
PMMA polymer microfiber doped Multi Walled Carbon Nanotubes (MWCNTs) was reported for alcohol sensing application. The sensitivity of the sensor is increasing relatively with the increment of the alcohol concentration which affects the transmission output power. However, the challenges are on choosing the right material and the simplicity on the fabrication of microfiber sensor for an improvement of the sensitivity of the sensor. A PMMA polymer microfiber doped MWCNTs was introduced for an application of alcohol detection system. Direct drawing technique was used to form a uniform waist size of microfiber sensor with 6µm diameter and 5mm length respectively. The performance of the fabricated sensor was tested with two types of alcohol, namely ethanol and 2-propanol at concentrations varying from 2% to 8% with 2% intervals. The performance which includes sensitivity, linearity and resolution were studied and analysed for the undoped PMMA and PMMA doped MWCNTs-doped polymer microfiber. The PMMA doped MWCNTs sensor which exhibited higher sensitivity for ethanol sensing with 83.23dBm/% with a linearity of 99.96% and a sensitivity of 73.75dBm/% with linearity 99.82% for 2- propanol sensing. The resolution has improved significantly by 0.0004% and 0.0007% respectively. In conclusion, PMMA doped MWCNTs was able to increase the sensitivity as well as the reproducibility of the microfiber sensor for the alcohol detection system.
Nowadays, downstream bioprocessing industries inclines towards the development of a green and high efficient bioseparation technology. Betacyanins are presently gaining higher interest in the food science as driven by their high tinctorial strength and health promoting functional properties. In this study, a novel green integration process of liquid biphasic electric partitioning system (LBEPS) was proposed for betacyanins extraction from peel and flesh of red-purple pitaya. Initially, the betacyanins extraction using LBEPS with initial settings was compared with that of liquid biphasic partitioning system (LBPS), and the results revealed that both systems demonstrated a comparable betacyanins extraction. This was followed by further optimizing the LBEPS for better betacyanins extraction. Several operating parameters including operation time, voltage applied, and position of graphitic electrodes in the system were investigated. Moreover, comparison between optimized LBEPS and LBPS with optimized conditions of electric system (as post-treatment) as well as color characterization and antioxidant properties assessment were conducted. Overall, the betacyanins extraction employing the optimized LBEPS showed the significant highest values of betacyanins concentration in alcohol-rich top phase (C t ) and partition coefficient (K) of betacyanins from peel (99.256 ± 0.014% and 133.433 ± 2.566) and flesh (97.189 ± 0.172% and 34.665 ± 2.253) of red-purple pitaya. These results inferred that an optimal betacyanins extraction was successfully achieved by this approach. Also, the LBEPS with the peel and flesh showed phase volume ratio (V r ) values of 1.667 and 2.167, respectively, and this indicated that they have a clear biphasic separation. In addition, the peel and flesh extract obtained from the optimized LBEPS demonstrated different variations of red color as well as their antioxidant properties were well-retained. This article introduces a new, reliable, and effective bioseparation approach for the extraction of biomolecules, which is definitely worth to explore further as a bioseparation tool in the downstream bioprocessing.
This paper investigates the optimum processing conditions of microwave assisted extraction (MAE) of anthraquinone (aloe emodin, AE) and flavonoids (kaempferol 3-gentiobioside, K3G and kaempferol, KA) from Senna alata (L.) Roxb. The kinetic study indicates that MAE showed a greater extraction rate, compared to ultrasonic-assisted and maceration, due to the enhanced power which altered the leaf microstructures. The optimisation was undertaken using one-factor-at-a-time, two-level factorial design and central composite design were used to maximise the yield of the target compounds. The optimum yield of K3G (4.27 mg/g DW), KA (8.54 mg/g DW) and AE (0.86 mg/g DW) was obtained at 90.5% ethanol, microwave power of 18.6 W/mL with a desirability of 0.82. In addition, the yield of K3G and KA is correlated positively with the antioxidant activity.
Raloxifene HCl belongs to a class of selective estrogen receptor modulators (SERMs) which is used for the management of breast cancer. The major problem reported with raloxifene is its poor bioavailability which is only up to 2%. The main objective of the present work was to formulate raloxifene loaded ethosomal preparation for transdermal application and compare it with an oral formulation of the drug. Five ethosomal formulations with different concentrations of ethanol and a conventional liposomes formulation were prepared by rotary evaporation method. The prepared systems were characterised by high resolution transmission electron microscopy (HRTEM), force emission electron microscopy (FESEM), atomic force microscopy (AFM), X-ray diffraction (XRD) and 31P NMR study. All these advanced characterization study established that the ethosome formulation was well defined by its size, shape and its bilayer formation. Transdermal flux of the optimized ethosome formulation was 22.14 ± 0.83 µg/ml/cm2 which was 21 times higher when compared to the conventional liposomes. Confocal microscopy study revealed an enhanced permeation of coumarin-6 dye loaded ethosomes to much deeper layers of skin when compared with conventional liposomes. The gel was found to be pseudoplastic with elastic behaviour. In-vivo studies on rats showed a higher bioavailability of RXL (157% times) for ethosomal formulation when compared with the oral formulation. In conclusion, RXL loaded ethosomal formulation via transdermal route showed superior drug delivery properties as compared to oral formulation.
The emerging studies suggest antioxidant may represent an important role in defence against certain diseases outlined the necessity of determining their contents in tamarillo (Cyphomandra betacea), cherry tomato (Solanum lycopersicum var. cerasiforme), and tomato (Lycopersicon esculentum). This study aims to determine the antioxidant capacity, total phenolic content and total flavonoid content in tamarillo, yellow cherry tomato, red cherry tomato, and tomato in 70% ethanol and water extracts. The ethanol extract showed the highest scavenging activity, ferric reducing activity, phenolic and flavonoid contents, whereas, the water extract showed higher value for antioxidant activity in β-Carotene bleaching assay. Tamarillo showed the highest antioxidant activity (22.92 ± 3.60%, 28.89 ± 3.85%), scavenging activity (44.25 ± 0.82 μg/ml, 47.38 ± 1.11 μg/ml), ferric reducing activity (12.17 ± 0.53 μM Fe (II)/g, 3.72 ± 0.20 μM Fe (II)/g), phenolic content (7.63 ± 0.37 mg GAE/g edible portion, 1.83 ± 0.50 mg GAE/g edible portion) and flavonoid content (6.44 ± 0.16 mg CE/g edible portion, 2.22 ± 0.31 mg CE/g edible portion) in ethanol and water extracts respectively. For ethanol extracts a positive correlations existed (0.66 ≤ r ≥ 0.97) between ferric reducing activity, antioxidant activity, phenolic content and flavonoid content. While, in water extract correlation test revealed a positive correlations between antioxidant activity, ferric reducing activity and phenolic content (0.645 ≤ r ≥ 0.706) and between antioxidant activity and flavonoid content (r = 0.820). In conclusion, tamarillo exhibits the highest antioxidant capacity, phenolic content and also flavonoid content.
Carbon nanomaterials exhibit novel characteristics including enhanced thermal, electrical, mechanical, and biological properties. Nanodiamonds; first discovered in meteorites are found to be biocompatible, non-toxic and have distinct optical properties. Here we show that nanodiamonds with the size of <5 nm are formed directly from ethanol via 1025 nm femtosecond laser irradiation. The absorption of laser energy by ethanol increased non-linearly above 100 μJ accompanied by a white light continuum arises from fs laser filamentation. At laser energy higher than 300 μJ, emission spectra of C, O and H in the plasma were detected, indicating the dissociation of C2H5OH. Nucleation of the carbon species in the confined plasma within the laser filaments leads to the formation of nanodiamonds. The energy dependence and the roles of the nonlinear phenomenon to the formation of homogeneous nanodiamonds are discussed. This work brings new possibility for bottom-up nanomaterials synthesis based on nano and ultrafast laser physics.
Introduction: Alcohol is a major risk factor for various non-communicable diseases (NCDs) such as cardiovascular related illnesses, liver cirrhosis and cancer. Despite the dangers of alcohol use, there is limited local research available to assist policy and advocacy. This commentary attempts to highlight what is presently available and suggestions to move forward in this field of research and services provision. Methods: A brief report of recent updates is provided for this article. Results and Conclusion: A number of recommendations are provided to assist in deliberating discussions to shape future policies which will improve current available practice and clinical service in the field of alcohol addiction.
Bifurcation and chaos are important phenomena affecting many physical and chemical systems. They are also related to the stability/instability and multiplicity phenomena associated with these systems. The phenomena are not only of theoretical/mathematical interest but are also important for laboratory, pilot plant and commercial units. This paper concentrates on 3 systems:
1. The novel auto-thermic Circulating Fluidized Membrane Steam Reformer (CFBMSR) for the efficient production of the clean fuel hydrogen and which shows multiplicity of the steady state (static bifurcation)
2. A novel fermentor for the efficient production of bio-ethanol that shows static/dynamic bifurcation as well as chaotic behaviour
3. The neurocycle of the acetylcholine transmitter in the brain using diffusion-reaction models in order to gain insight into their possible connection to Alzheimer and Parkinson Diseases (AD/PD); these are preliminary efforts to investigate the bifurcation and chaotic behaviour of this neurocycle.
Complex dielectric permittivity measurements of propylene glycol (PG) in ethanol at various mole fractions were measured by using open-ended coaxial probe technique at different temperatures in the frequency range 0.02ethanol and their binary system have been evaluated theoretically at gaseous state as well as alcoholic medium by using PCM and IEFPCM solvation models from the Hatree-Fock (HF) and Density Functional Theory (DFT-B3LYP) methods with 6-311G* and 6-311G** basis sets. The obtained results have been interpreted in terms of the short and long range ordering of the dipoles, Kirkwood correlation factor (geff), thermodynamic parameters, mean molecular polarizability (αM) and interaction in the mixture through hydrogen bonding.
The extraction of pectin from dragon fruit (Hylocereus polyrhizus) peels under three different extraction conditions was identified as an alternative source of commercial pectin. In this work, dried alcohol-insoluble residues (AIR) of dragon fruit peels were treated separately with 0.25% ammonium oxalate/oxalic acid at a pH of 4.6 at 85oC; 0.03 M HCl at a pH of 1.5 at 85oC; and de-ionized water at 75oC. The pectin obtained from these methods was compared in terms of yield, physicochemical properties and chemical structure. Fourier Transform Infrared Spectroscopy (FTIR) was used in the identification of dragon fruit pectins. The results showed that the pectin yield (14.96-20.14% based on dry weight), moisture content (11.13-11.33%), ash content (6.88-11.55%), equivalent weight (475.64-713.99), methoxyl content (2.98-4.34%), anhydrouronic acid (45.25-52.45%) and the degree of esterification (31.05-46.96%) varied significantly (p < 0.05) with the various extraction conditions used. Pectin extracted with ammonium oxalate gave the highest yield of pectin, with high purity and low ash content. Based on the value of methoxyl content and the degree of esterification, dragon fruit pectin can be categorized as low-methoxyl pectin.
ABSTRACT
Clinacanthus nutans (C. nutans) leaf extracts have been widely used by cancer patients in Malaysia and local practice claims a cure to cancer. There were several studies done to determine the cytotoxicity potency of C. nutans extracts on various types of cells. However, there is still lacking on the knowledge regarding the combination effect of C. nutans with anticancer drugs. Thus, the study was carried out to determine the cytotoxicity potency of C. nutans extracts and paclitaxel (PTX) alone and, in combination on MDA-MB-231 cells. The cells were treated with 100% ethanol extract of C. nutans (CNE) and water extract of C. nutans (CNA), PTX and combination of both extracts and PTX for 72 hours and the cytotoxic activity was determined using SRB assay. Result showed that CNE had little cytotoxic activity, whereas CNA showed no cytotoxic activity on MDA-MB-231 cells. For combination treatment of C. nutans extracts and PTX, only CNE showed significant enhanced PTX-induced cytotoxicity (p < 0.05), meanwhile CNA inhibited PTX-induced cytotoxicity significantly (p < 0.05). As a conclusion, CNE was able to increase PTX potency to inhibit the viability of MDA-MB-231 cells.
Bottom-contact pentacene OTFTs are fabricated using cross-linked poly(vinyl alcohol) (PVA) insulator and its reliability characteristics are analyzed. The hysteresis of the OTFTs is mainly caused by the electrons that are injected from the gate electrode to the cross-linked PVA insulator. To block the injection of electrons, plasma-enhanced chemical vapor deposition (PECVD) SiO2 layer is inserted between the gate electrode and the cross-linked PVA layer, so that the minimum hysteresis can be obtained. In addition, the effects of the gate bias stress as a function of time is investigated to examine the long-term reliability of the device during the operation.
Several methods of incorporating sago pith waste (SPW) into poly(vinyl alcohol) (PVA) had been conducted: (i) dry blending (PVA/SPW/G), (ii) blending of SPW and pre-plasticized PVA (pPVA/SPW/G) and (iii) blending of pre-plasticized of both PVA and SPW (pPVA/pSPW). The effect of the compounding method on the mechanical and water absorption properties were investigated. The addition of SPW into PVA greatly reduced the tensile strength and elongation at break. The tensile strength and elongation at break of PVA/SPW composites with identical geometry during compounding stage (powder/powder and pellet/pellet), which were PVA/SPW/G and pPVA/pSPW yielded the highest value. The percentage of water absorbed by PVA/SPW/G (without pre-plasticization) was the highest, followed by pPVA/pSPW and pPVA/SPW/G.
Kanji Dioscorea pentaphylla telah diubah suai dengan pensulfatan dan peneutralan bagi menghasilkan natrium
kanji sulfat. Tindak balas pensulfatan dilakukan dengan asid sulfurik dalam etanol dan air pada suhu 0o
C. Darjah
penukargantian dikira berdasarkan peratus karbon dan sulfur yang ditentukan menggunakan penganalisis unsur CHNS.
Natrium kanji sulfat yang mempunyai darjah penukargantian dan peratus nisbah berat hasil yang tinggi dipilih dan
dicirikan dengan spektrum transformasi Fourier inframerah (FT-IR) dan profil pembelauan sinar-X (XRD). Kehadiran
dua puncak getaran regangan C-O-S dan S=O dalam spektrum FT-IR dan puncak berbeza yang terhasil dalam corak
difraktogram XRD membuktikan tindak balas berlaku pada struktur kanji. Sifat termal juga ditentukan dengan kalorimeter
pengimbas pembezaan (DSC) dan analisis termogravimetri (TGA). Natrium kanji sulfat yang dihasilkan mempunyai
kestabilan termal yang baik kerana mempunyai suhu penguraian pada 265o
C. Natrium kanji sulfat ini sesuai dijadikan
bahan tambahan dalam penghasilan hidrogel, organogel dan filem dengan sifat anionik kerana degradasi tidak terjadi
di bawah suhu ini.
A mild and effective synthesis of resorcinol-furfural (RF) thermosetting resin was proposed with ethanol as a distinctive solvent, which, as a usually neglected factor, was shown to not only help form a homogeneous reaction system but also observably reduce the energy barriers between the early intermediates and transition states in addition reactions by explicit solvent effects, drawn from theoretical calculation conclusions. Besides, the para-additions on aromatic rings were more dominant than ortho-additions with the same reactants, which affected the final link types of monomers verified by Fourier transform infrared spectroscopy and two-dimensional nuclear magnetic resonance tests. The prepared resin can be assigned to a relatively fast gel speed and a high residual mass (65.25%) after pyrolysis in a N2 atmosphere by adjusting the molar ratios of F to R, and the curing of that was a complex reaction, with a curing temperature around 149 °C and an activation energy of about 49.11 kJ mol-1 obtained by the Kissinger method.