Phytomedicines are believed to have benefits over conventional drugs and are regaining interest in current research. Moringa oleifera is a multi-purpose herbal plant used as human food and an alternative for medicinal purposes worldwide. It has been identified by researchers as a plant with numerous health benefits including nutritional and medicinal advantages. Moringa oleifera contains essential amino acids, carotenoids in leaves, and components with nutraceutical properties, supporting the idea of using this plant as a nutritional supplement or constituent in food preparation. Some nutritional evaluation has been carried out in leaves and stem. An important factor that accounts for the medicinal uses of Moringa oleifera is its very wide range of vital antioxidants, antibiotics and nutrients including vitamins and minerals. Almost all parts from Moringa can be used as a source for nutrition with other useful values. This mini-review elaborate on details its health benefits.
Matched MeSH terms: Minerals/pharmacology; Minerals/therapeutic use
Whole grains consumption promotes health benefits, but demonstrates controversial impacts from phytic acid in meeting requirements of good health. Therefore, this study was aimed to determine the nutrient bioaccessibility and antioxidant properties of rice cultivars named "Adan" or "Bario" and deduce the nutritional impact of phytic acid. Majority of the dehusked rice in the collection showed an acceptable level of in-vitro starch digestibility and in-vitro protein digestibility, but were poor in antioxidant properties and bioaccessibility of minerals (Ca, Fe and Zn). The drawbacks identified in the rice cultivars were due to relatively high phytic acid content (2420.6 ± 94.6 mg/100 g) and low phenolic content (152.39 ± 18.84 μg GAE/g). The relationship between phytic acid content and mineral bioaccessibility was strongest in calcium (r = 0.60), followed by iron (r = 0.40) and zinc (r = 0.27). Phytic acid content did not significantly correlate with in-vitro starch digestibility and in-vitro protein digestibility but showed a weak relationship with antioxidant properties. These suggest that phytic acid could significantly impair the mineral bioaccessibility of dehusked rice, and also act as an important antioxidant in non-pigmented rice. Bario rice cultivars offered dehusked rice with wide range of in-vitro digestibility of starch and protein, and also pigmented rice as a good source of antioxidants. However, there is a need to reduce phytic acid content in dehusked rice for improved mineral bioaccessibility among Bario rice cultivars.
The research presented here investigates the reaction mechanism of wollastonite in situ mineral carbonation for carbon dioxide (CO2) sequestration. Because wollastonite contains high calcium (Ca) content, it was considered as a suitable feedstock in the mineral carbonation process. To evaluate the reaction mechanism of wollastonite for geological CO2 sequestration (GCS), a series of carbonation experiments were performed at a range of temperatures from 35 to 90 °C, pressures from 1500 to 4000 psi, and salinities from 0 to 90,000 mg/L NaCl. The kinetics batch modeling results were validated with carbonation experiments at the specific pressure and temperature of 1500 psi and 65 °C, respectively. The results showed that the dissolution of calcium increases with increment in pressure and salinity from 1500 to 4000 psi and 0 to 90000 mg/L NaCl, respectively. However, the calcium concentration decreases by 49%, as the reaction temperature increases from 35 to 90 °C. Besides, it is clear from the findings that the carbonation efficiency only shows a small difference (i.e., ±2%) for changing the pressure and salinity, whereas the carbonation efficiency was shown to be enhanced by 62% with increment in the reaction temperature. These findings can provide information about CO2 mineralization of calcium silicate at the GCS condition, which may enable us to predict the fate of the injected CO2, and its subsurface geochemical evolution during the CO2-fluid-rock interaction.
Megaselia scalaris (Loew) is one of the best-known diets for the swiftlet. Previous studies have addressed the problem of some mass rearing conditions for this insect; unfortunately, the details of the nutritional composition of the life stages and cost of the breeding materials were insufficiently reported, even though this information is crucial for farming the edible-nest swiftlet. We aimed to investigate the nutritional composition of the life stages of M scalaris on a cost basis using 3 common commercial breeding materials: chicken pellets (CPs), fish pellets (FPs), and mouse pellets (MPs). Modified Association of Official Analytical Chemists (AOAC) proximate and mineral analyses were carried out on the insect's third instar larvae, pupal, and adult stages to determine the nutritional composition. Regardless of the breeding materials, the adult stage of M scalaris had significantly higher crude protein than the other stages; the pupae were rich in calcium, which is required for egg production; and the third instar larvae had the highest amount of crude fat compared with the other stages. Regarding the energy content, there were no significant differences among the stages according to the breeding materials. In terms of nutritional cost, CP was the most economic breeding material and generated the highest amount of nutrients per US dollar (US $). Different life stages of M scalaris were used by the swiftlets by supplying the required nutrients, and future studies should focus on effective diet feeding methods.
Three strains of the chain-forming diatom Skeletonema marinoi, differing in their production of polyunsaturated aldehydes (PUA) and nutritional food components, were used in experiments on feeding, egg production, hatching success, pellet production, and behavior of three common planktonic copepods: Acartia tonsa, Pseudocalanus elongatus, and Temora longicornis. The three different diatom strains (9B, 1G, and 7J) induced widely different effects on Acartia tonsa physiology, and the 9B strain induced different effects for the three copepods. In contrast, different strains induced no or small alterations in the distribution, swimming behavior, and turning frequency of the copepods. 22:6(n-3) fatty acid (DHA) and sterol content of the diet typically showed a positive effect on either egg production (A. tonsa) or hatching success (P. elongatus), while other measured compounds (PUA, other long-chain polyunsaturated fatty acids) of the algae had no obvious effects. Our results demonstrate that differences between strains of a given diatom species can generate effects on copepod physiology, which are as large as those induced by different algae species or groups. This emphasizes the need to identify the specific characteristics of local diatoms together with the interacting effects of different mineral, biochemical, and toxic compounds and their potential implications on different copepod species.
This work aims to give insight on the effect of accelerated weathering, i.e., the combination of ultraviolet (UV) exposure and water spraying, on the visual and mechanical properties of basalt fiber reinforced polymer (BFRP) composites. The solvent exchange method, sonication and high shear milling technique were used to prepare the nanocomposite laminates. Three types of laminates were fabricated, i.e., unmodified BFRP, nanosilica modified BFRP and graphene nanoplatelet (GNP) modified BFRP composites with the total fiber loading of 45 wt.%. Glass fiber reinforced polymer (GFRP) laminate was also prepared for performance comparison purposes between the natural and synthetic fibers. The laminates were exposed to UV with a total weathering condition of 504 h using a Quantum-UV accelerated weathering tester. The weathering condition cycle was set at 8 h 60 °C UV exposure and 4 h 50 °C condensation. The discoloration visual inspection on the tested specimen was observed under the optical microscope. The obtained results showed that the UV exposure and water absorption caused severe discoloration of the laminates due to photo-oxidation reaction. The effect of weathering conditions on tensile and flexural properties of unmodified BFRP composites indicated that the UV exposure and water absorption caused reduction by 12% in tensile strength and by 7% in flexural strength. It is also found that the reduction in tensile and flexural properties of nanomodified BFRP composites was smaller than the unmodified system. It concluded from this work, that the mineral based composites (i.e., BFRP) has high potential for structural applications owing to its better properties than synthetic based composites (i.e., GFRP).
Introduction: Rice husk has portrayed great potential in becoming a sustainable biomass source in producing silica, cellulose and carbon materials, which garnered widespread interest among researchers. The objective of the current study is to determine the morphological and compositional changes in rice husk due to the synergistic effects of ther- mochemical treatment. Methods: Washed and dried rice husk was blended into a fine powder and then subjected to step-wise heat treatment and acid digestion to produce white ash. The intermittent products, as well as the original rice husk and the final ash product, were characterised using analytical instruments to document the morphologi- cal and chemical composition changes. Results: This report highlights the production of pure rice husk ash using a step-wise treatment using a combination of thermochemical treatment and carbonisation. The results showed that a partial breakdown of the lignocellulose components was achieved using directed thermal treatment at low tem- perature. The ionic impurities were leached out in subsequent heated acid treatment. Thereafter, the carbonaceous organic matter was completely converted to carbon during the carbonisation of the sample and the remaining carbon residue was removed during calcination. High purity ash contained agglomerated and nanostructured silica in the dimensions of 20 to 50 nm in the amorphous form. Conclusion: The step-wise treatment allowed systematic removal of each compound while maintaining the amorphous mineral phase of silica and avoiding carbon fixation. Under- standing the effect of each treatment offers insight to produce purer silica from rice husk.
This paper clarified the microstructural element distribution and electrical conductivity changes of kaolin, fly ash, and slag geopolymer at 900 °C. The surface microstructure analysis showed the development in surface densification within the geopolymer when in contact with sintering temperature. It was found that the electrical conductivity was majorly influenced by the existence of the crystalline phase within the geopolymer sample. The highest electrical conductivity (8.3 × 10-4 Ωm-1) was delivered by slag geopolymer due to the crystalline mineral of gehlenite (3Ca2Al2SiO7). Using synchrotron radiation X-ray fluorescence, the high concentration Ca boundaries revealed the appearance of gehlenite crystallisation, which was believed to contribute to development of denser microstructure and electrical conductivity.
Mango is one of the popular fruits in Malaysia and has been used in the jam, puree and drinks production. Production of food products using mango pulp has generated by-products such as peel and kernel. Disposal of these by-products will cause environmental pollution if not properly treated. Mango peel contains high nutritional composition and antioxidant properties and can be utilised as food ingredients. The objectives of this study are to determine the nutritional composition and antioxidant properties of the peels of two selected mango varieties, namely Golden Lily and Chokanan. Analysis of proximate composition, minerals, total phenolic compounds, carotenoids, and antioxidant activity (DPPH and ABTS) were carried out in this study. Results of the proximate analysis showed that the peels of both mango varieties were a good source of fibre, which were 14.45% for Golden Lily and 14.89% for Chokanan. The crude fat, crude protein, and total carbohydrate of Chokanan peel (2.62%, 4.67% and 57.74%, respectively) were higher than the Golden Lily peel (1.13%, 2.90% and 53.16%, respectively). Contrastingly, the moisture content of the Golden Lily peel (24.67%) was higher than the Chokanan peel (16.61%). Potassium was the main mineral found in both Golden Lily and Chokanan mango peels (8802.10 mg/kg and 8443.60 mg/kg, respectively). The total phenolic compounds in the peels of both mango varieties were not significantly different. The Chokanan peel contained a higher carotenoids content (35.26 µg/g) than the Golden Lily peel (15.03 µg/g). The ABTS value for Chokanan peel was higher (1406.00 μmol TE/g) than Golden Lily peel (1314.00 μmol TE/g). This study showed that Chokanan and Golden Lily mango peels have the potential to be utilised as ingredient in food products due to their high fibre content.
Generally, pineapple sucker is used as the main planting material for commercial cultivation
of pineapple. Pineapple sucker is usually obtained either from the stalk or the stem of a
pineapple plant. Research to study the effect of planting media using mineral soil as the main
component for the mixture on the growth of sucker by stem cutting technique was conducted. The objective of this research is to study the effects of mineral soil-based mixed planting
media on the growth of pineapple suckers produced cultivated via stem cutting of Madu
pineapple. The research was conducted at the Pineapple Nursery of the Faculty of Sustainable
Agriculture, UMS Sandakan, from March 2019 until September 2019. The treatments used in
this research were, soil as T1 (100%); Soil:coco peat as T2 (1:1,v/v); Soil:peat soil as T3
(1:1,v/v); Soil:sand as T4 (1:1,v/v). The data obtained showed there is a significant difference
in the number of a successfully germinated sucker. However, no significant difference was
detected for the sucker growth parameters. Planting media T3, soil: coco peat recorded the
highest number of successfully germinated suckers (12.25). Meanwhile, for growing media, suggested T2 soil: peat soil were recorded the highest for root length (15.53 cm), leaf number
(18.00), and stem diameter (2.18 cm) at 60 days after transplant (DAT).
Being an imperative material for man either used as building materials, pottery or as components in material industry and technology, knowledge of clays elemental contents is important. In the present study ten clay samples obtained from various locations in North-West Peninsular Malaysia were used. Majority of the clays were economically manufactured to be used as building materials or pottery. The objective of study was to determine the main elemental contents of the samples, and relate the results to the types of minerals, as well as to compare them with clays from other studies. In the study X-ray Fluorescence (XRF) coupled to samples dilution method and standard calibration samples was used. The elements detected in the study were Si, Al, Fe, Ti, K and Ca. Depending on locations, the percentage concentration ranged between 24.8 – 32.4 for Si, 10.8 – 19.0 for Al, 0.09 – 2.12 for Fe, 0.08 – 1.13 for Ti, 0.45 – 3.39 for K and trace amount of Ca and P. However, Mg that normally found in typical clay was not found in the studied samples. Comparing the oxide of the major elements with other studies, it was found that the clay samples contained mixtures of kaolinite (two-layered structure) and illite (three-layered structure).
Tailing sand is the residue mineral from tin extraction that contains between 94% and 99.5% silica, which can be used as moulding sand. It is found in abundance in the Kinta Valley in the state of Perak, Malaysia. Adequate water content and clay in moulding sand are important factors for better strength and
casting quality of products made from tailing sand. Samples of tailing sand were investigated according
to the American Foundrymen Society (AFS) standard. Cylindrical test pieces of Ø50 mm×50 mm in height from various sand-water ratios were compacted by applying three ramming blows of 6666g each using a Ridsdale-Dietert metric standard rammer. The specimens were tested for green compression strength using a Ridsdale-Dietert universal sand strength machine. Before the tests were conducted, moisture content of the tailing sand was measured using a moisture analyser. A mixture bonded with 8% clay possesses higher green compression strength compared to samples bonded with 4% clay. The results also show that in order to achieve maximum green compression strength, the optimum allowable moisture content for mixtures bonded with 8% clay is ranged between 3.75 and 6.5% and for mixtures bonded with 4% clay is 3-5.5%.
Legume is a plant in the family of Fabacae or Leguminosae that rich in protein, carbohydrate, dietary fibre, and minerals. Germination of legume causes some important changes in the biochemical and a nutritional characteristic of the legumes that may be beneficial to human’s health and nutritional status. This study was carried out to determine the effect of germination on total phenolic, tannin and phytic acid contents of soy beans and peanut. The process of germination was carried out by soaking legumes in water for 6 hours, followed by germinating them in wet muslin cloth for 48 hours. After germination, samples were dried and stored in refrigerator before analysis. Total phenolic, tannin and phytic acid were determined spectrophotometrically. Total phenolic contents were decreased significantly (p
This work aims at optimizing the media constituents for citric acid production from oil palm empty fruit bunches (EFB) as renewable resource using artificial neural networks (ANN) approach. The bioconversion process was done through solid state bioconversion using Aspergillus niger. ANN model was built using MATLAB software. A dataset consists of 20 runs from our previous work was used to develop ANN. The predictive and generalization ability of ANN and the results of RSM were compared. The determination coefficients (R2-value) for ANN and RSM models were 0.997 and 0.985, respectively, indicating the superiority of ANN in capturing the non-linear behavior of the system. Validation process was done and the maximum citric acid production (147.74 g/kg-EFB) was achieved using the optimal solution from ANN which consists of 6.1% sucrose, 9.2% mineral solution and 15.0% inoculum.
Considerable amount of uranium and thorium are found in our local zircon and the level is much higher than the maximum value adopted by Malaysia and many importing countries. Energy Dispersive X-ray Flourescence (EDXRF) proves to be a very valuable tool in the determination of these radioactive elements as it can perform the analysis simultaneously in shorter time. Quantitative analysis of this mineral involves the use of a fundamental parameter technique developed by National Bureau of Standard, USA and Geological Survey Canada (NBS-GSC FPT). The analysis for tin slag is more challenging as there is no reference standard of similar material. Thus the standard addition method was applied to correct the error from the matrix of the sample.
Mineral elemental uptake by Colocasia esculenta growing in swamp agroecosystem was studied following 14, 18 or 28 months of field spraying (MAT, months after treatment) with herbicide Gramoxone ® (paraquat). In overall, Al (68226.67 + 24066.56 μg/g dw) was the major element in riverine alluvial swamp soil, followed by micronutrient Fe (22280.00 + 6328.87 μg/g dw).
Concentration of macronutrient K (20733.33 + 7371.82 μg/g dw) was the highest in swamp taro leaf followed by macronutrient Ca (7050.00 + 3767.26 μg/g dw). In overall, the order of importance of the average mineral concentration in swamp taro leaf was K > Ca > Mn > Al > Na > Fe > Zn > Br > Co. However at 14 MAT, the order of importance of mineral content concentration in swamp taro leaf was K > Ca > Al > Na > Mn > Fe > Zn > Br > Co. At 18 MAT, the order of importance of mineral content concentration in swamp taro leaf was K > Ca > Mn > Al > Fe > Na > Zn > Br > Co. At 28 MAT, the order of importance of mineral content concentration in swamp taro leaf was K > Ca > Mn > Fe > Al > Zn > Na > Br > Co. In overall, the average order of importance of mineral elemental uptake or the soil plant transfer coefficient was Mn > K > Na > Zn > Co > Fe > Al; similar with the order at 28 MAT. However, at 14 MAT the order of importance of the soil plant transfer coefficient was different at Mn > K > Na > Co > Zn > Al > Fe.
The study was conducted to determine the mineral contents of 20 species of marine fish and 4 species of shellfish from the west coast of Peninsular Malaysia.Overall, the contents of micro minerals in all samples were below the permissible limits; except for oyster; with copper slightly higher than the limit set by FAO/WHO (1984), but below the limit set by Malaysian Food Regulations (1985); and zinc content higher than the limit set by Malaysian Food Regulations (1985), but below the limit set by FAO/WHO (1984). Meanwhile for macro minerals, most samples contained comparable sodium contents, significantly lower of potassium contents, higher calcium contents, and extremely higher of magnesium contents compared to the common ranges reported in the literatures. All samples were good sources of micro and macro minerals and could provide multi-health benefits if consumed in recommended amounts.
A study was conducted to quantitate the concentrations of heavy metals, such as Hg, Pb and Cd in eight species of marine fin fish caught off the coast of Langkawi Island in Malaysia, as well as in its waters. The same fish were also used to determine the content of nutritional minerals, such as copper (Cu), zinc (Zn), calcium (Ca), and manganese (Mn).Fish and water samples were collected from four different areas, namely (1) Main Jetty Pulau Tuba (MJPT), (2) Teluk Cempedak Jetty (TCJ), (3) Simpang Tiga Chian Lian (STCL) and (4) Main Jetty Kuah (MJK) around Langkawi Island. Results showed that for the vital elements, all species had higher concentration of Zn compared to other elements. For the toxic elements, lead (Pb) and mercury (Hg) were found to have lower concentration of the mean values than the permissible limits set by FAO/WHO (1984). However, cadmium (Cd) level was slightly higher than the permissible limit but was still acceptable according to the Malaysian Food Regulation (1985). It can be concluded that all fish species studied are safe to be consumed.
Cavendish (Musa paradisiaca L, cv cavendshii) and Dream (Musa acuminata colla. AAA, cv ‘Berangan’) banana flours were prepared from ripe fruits collected from eleven markets located in Penang, Malaysia. The mineral composition (Na, K, Ca, Mg, Cu, Fe, Mn, Zn) of the flour were analyzed by atomic absorption spectrophotometer and the data obtained were analyzed using logistic regression model. Ripe banana flours were rich source of K and a fair source of other minerals, however logistic regression model identified Mg as an indicator to discriminate between the two types of banana flour affording 100 % correct assignation. Based on this result, mineral analysis may be suggested as a method to authenticate ripe banana flour. This study also presents the usefulness of logistic regression technique for analysis and interpretation of complex data.
In this study, two types of plants materials were used namely Garcinia atrovirdis and Cynometra
cauliflora to determine the proximate composition, mineral content and antioxidant activities. Total phenolic content (TPC) and ferric reducing antioxidant power (FRAP) assay had been used to determine antioxidant activity in both samples. The moisture, ash, fiber, fat, protein and carbohydrate content in both samples were determined by using Association of Official Analytical Chemists (AOAC) methods. Mineral content in the sample was determined using Atomic absorption spectrophotpmetry (AAS). The results showed higher TPC and FRAP values in Cynometra cauliflora compared to Garcinia atrovirdis. Methanol extractions gave higher TPC and FRAP values compared to water extraction. The results obtained indicated that both samples have the potential to be as a source of natural antioxidants. Further study should be conducted to explore the benefits of underutilized fruits not only in antioxidant activity but other usages as well.