Displaying publications 61 - 80 of 203 in total

Abstract:
Sort:
  1. Hamsawahini K, Sathishkumar P, Ahamad R, Yusoff AR
    Talanta, 2016 Feb 1;148:101-7.
    PMID: 26653429 DOI: 10.1016/j.talanta.2015.10.044
    An effective electrode was developed based on electromembrane extraction (EME) and square wave voltammetry (SWV) for simultaneous separation, pre-concentration and determination of lead (II) (Pb(II)) ions in complex aqueous samples. Electrochemically reduced graphene oxide-graphite reinforced carbon (ErGO-GRC) was utilized in conjunction with the SWV. Pb(II) ions were extracted from an aqueous sample solution into an acidic acceptor phase (1M HCl) in the lumen of the polyvinylidene fluoride (PVDF) membrane bag by the application of voltage of maximum 6 V across the supported liquid membrane (SLM), consisting of organic solvent and di-(2-ethylhexyl)phosphoric acid (D2EHPA). The parameters affecting the EME were optimized for Pb(II) ions. The optimum EME conditions were found to be 20% D2EHPA in 1-octanol impregnated in the wall of PVDF membrane (PVDF17) as the SLM, extraction time of 20 min, pH of sample solution of 8 and a voltage of 5 V. The PVDF-ErGO-GRC electrode system attained enrichment factors of 40 times and 80% of extraction with relative standard deviations (n=5) of 8.3%. Good linearity ranging from 0.25 to 2 nM with coefficients correlation of 0.999 was obtained. The Pb(II) ions detection limit of PVDF-ErGO-GRC electrode was found to be 0.09 nM. The newly developed single setup electrochemical system was applied to complex aqueous samples such as tap, river and sea water to evaluate the feasibility of the method for applications.
    Matched MeSH terms: Seawater
  2. Dada AC, Asmat A, Gires U, Heng LY, Deborah BO
    Glob J Health Sci, 2012 May;4(3):126-38.
    PMID: 22980239 DOI: 10.5539/gjhs.v4n3p126
    Despite the growing demand of tourism in Malaysia, there are no resolute efforts to develop beaches as tourist destinations. With no incentives to monitor public beaches or to use them in a sustainable manner, they might eventually degenerate in quality as a result of influx of pollutants. This calls for concerted action plans with a view to promoting their sustainable use. The success of such plans is inevitably anchored on the availability of robust quality monitoring schemes. Although significant efforts have been channelled to collation and public disclosure of bacteriological quality data of rivers, beach water monitoring appears left out. This partly explains the dearth of published information related to beach water quality data. As part of an on-going nation-wide surveillance study on the bacteriological quality of recreational beaches, this paper draws on a situation analysis with a view to proffering recommendations that could be adapted for ensuring better beach water quality in Malaysia.
    Matched MeSH terms: Seawater
  3. Teo SS, Ho CL, Teoh S, Rahim RA, Phang SM
    J Phycol, 2009 Oct;45(5):1093-9.
    PMID: 27032354 DOI: 10.1111/j.1529-8817.2009.00724.x
    Osmotic stress is one of the most significant natural abiotic stresses that occur in the intertidal zones. Seaweeds may physiologically acclimate to changing osmolarity by altering their transcriptome. Here, we investigated the transcriptomic changes of Gracilaria changii (B. M. Xia et I. A. Abbott) I. A. Abbott, J. Zhang et B. M. Xia in response to hyper- and hypoosmotic stresses using a cDNA microarray approach. Microarray analysis revealed that 199 and 200 genes from ∼3,300 genes examined were up- and down-regulated by >2-fold in seaweed samples treated at 50 parts per thousand (ppt) artificial seawater (ASW) compared with those at 30 ppt ASW, respectively. The number of genes that were up- and down-regulated by >2-fold in seaweed samples treated at 10 ppt ASW compared with those at 30 ppt ASW were 154 and 187, respectively. A majority of these genes were only differentially expressed under hyper- or hypoosmotic conditions, whereas 67 transcripts were affected by both stresses. The findings of this study have shed light on the expression profiles of many transcripts during the acclimation of G. changii to hyperosmotic and hypoosmotic conditions. This information may assist in the prioritization of genes to be examined in future studies.
    Matched MeSH terms: Seawater
  4. Bell JD, Munro JL, Nash WJ, Rothlisberg PC, Loneragan NR, Ward RD, et al.
    Adv. Mar. Biol., 2005;49:xi-374.
    PMID: 16503428
    Matched MeSH terms: Seawater
  5. Tong SL, Pang FY, Phang SM, Lai HC
    Environ Pollut, 1996;91(2):209-16.
    PMID: 15091442
    The occurrence of tributyltin (TBT) is reported in the coastal waters of a few selected sites in Peninsular Malaysia. Water, bivalves and sediment samples collected were analysed specifically for TBT using sensitive analytical methods which involved a solvent extraction procedure with appropriate clean-up followed by graphite furnace atomic absorption spectrometric measurements. The levels of TBT in the seawater in unexposed areas were found in the range from <3.4 to 20 ng litre(-1) as compared to coastal areas with high boat and ship activities where TBT levels in seawater were generally above 30 ng litre(-1), with the highest level found at 281.8 ng litre(-1). TBT levels in the tissues of random cockle and soft-shell clam samples from local markets were found in the range from <0.5 to 3.7 ng g(-1) wet weight. The levels of TBT found in green mussel samples both from the market (23.5 ng g(-1) wet weight) and those from a mussel farm (14.2 ng g(-1) wet weight) indicate slight accumulation of TBT. In sediments, TBT levels were found ranging from <0.7 ng g(-1) dry weight in unexposed coastal sites to as high as 216.5 ng g(-1) dry weight for a site within a port area.
    Matched MeSH terms: Seawater
  6. Low KL, Khoo HW, Koh LL
    Environ Monit Assess, 1991 Oct;19(1-3):319-33.
    PMID: 24233949 DOI: 10.1007/BF00401321
    Marine biofouling causes problems to marine structure and obstructs condenser tubes in cooling systems which use sea water as the coolant. The main purpose of this study is to investigate the seasonal ecology of biofouling organisms such as the green mussel, Perna viridis, the dominant fouling species in the Eastern Johore Straits at the Senoko Power Station. The spawning time and its relationship with environmental conditions were studied. The physical, chemical and biological conditions of the sea at Senoko were monitored for a year. Settling slides were used to study the fouling succession in different monsoon seasons. The study showed that there were two main spawning peaks for the green mussel and that these peaks occurred during the intermonsoon months of November and April. These peaks were also correlated with the bimodal patterns for salinity, dissolved oxyen, bivalve veliger larval density and total plankton biomass of the Eastern Johore Strait water. Succession patterns were similar during the two monsoon seasons, however, the rate of fouling was probably greater during the southwest monsoon months. It is therefore advisable that the control or reduction of biofouling in Eastern Johore Strait should take into account the seasonal fluctuations and spawning of the fouling organisms.
    Matched MeSH terms: Seawater
  7. Abdulbari HA, Basheer EAM
    Sci Rep, 2019 08 29;9(1):12576.
    PMID: 31467344 DOI: 10.1038/s41598-019-49071-7
    Directional solvent extraction is one of the promising membrane-less seawater desalination method. This technique was not extensively investigated due the poor mixing and separation performances of its bench-scale system. It is believed that, overcoming these drawbacks is possible now with the rapid development of microfluidics technology that enabled high-precession micro mixing and separation. This work presents microfluidics chip for extracting and separating salt from seawater. The chip was designed with two sections for extraction and separation. In both sections, the liquids were separated using capillary channels perpendicular to the main stream. The main channels were designed to be 400 µm in width and 100 µm in height. Two streams inlets were introduced through a Y-junction containing octanoic acid as the organic phase and saltwater as the aqueous phase. The desalination performance was investigated at four different temperatures and five different solvent flow rates. Water product salinity was recorded to be as low as 0.056% (w/w) at 60 °C and 40 mL/h. A maximum water yield of 5.2% was achieved at 65 °C and 40 mL/h with a very low solvent residual (70 ppm). The chip mass transfer efficiency was recorded to be as high as 68% under similar conditions. The fabricated microfluidic desalination system showed a significant improvement in terms of water yield and separation efficiency over the conventional macroscale. The high performance of this microsystem resulted from its ability to achieve a high mixing efficiency and separate phases selectively and that will provide a good platform in the near future to develop small desalination kits for personal use.
    Matched MeSH terms: Seawater
  8. Mazumdar P, Lau SE, Singh P, Takhtgahi HM, Harikrishna JA
    Physiol Mol Biol Plants, 2019 May;25(3):713-726.
    PMID: 31168234 DOI: 10.1007/s12298-019-00659-3
    Banana is often grown in coastal-regions, and while known for its sensitivity towards seawater, little is documented on the effect of sea-salt on the growth, physiology and metal homeostasis. Here we report that banana plantlets exposed to sea-salt at extreme (average seawater concentration; 52.7 dS m-1), severe (28.5 dS m-1) or moderate (10.2 dS m-1) salinity levels had reduced root length (2.0-6.0-fold), plant height (1.2-1.6-fold), leaf number (2.0-2.3-fold) and leaf area (3.3-4.0-fold) compared to control plantlets. Degradation of pigments (total chlorophyll: 1.3-12.3-fold, chlorophyll a: 1.3-9.2-fold; chlorophyll b: 1.3-6.9-fold lower and carotenoids: 1.4-3.7-fold lower) reflected vulnerability of photosystems to salt stress. Relative water content showed a maximum decrease of 1.5-fold in salt stress. MDA analysis showed sea-salt exposure triggers 2.3-3.5-fold higher lipid peroxidation. Metal content analysis showed a 73-fold higher Na value from roots exposed to extreme salinity compared to control plantlets. While phenotype was clearly affected, moderate salinity showed no significant alteration of macro (N, P, K and Ca) and micro (Fe, Mn and Cu) metal content. The antioxidant enzymes: SOD (3.2-fold), CAT (1.7-fold) and GR (6-fold) showed higher activity at moderate salinity level compared to control plantlets but lower activity at severe (SOD: 1.3-fold; CAT: 1.5-fold; GR: 2-fold lower) and extreme seawater salinity (SOD: 1.5; CAT: 1.9; GR: 1.3-fold lower). Mild changes in growth and physiology at sea-salt levels equivalent to moderate seawater flooding, indicate that banana will survive such flooding, while extreme seawater inundation will be lethal. This data provides a reference for future salinity-mediated work in banana.
    Matched MeSH terms: Seawater
  9. Saharudin MS, Wei J, Shyha I, Inam F
    Polymers (Basel), 2017 Jul 28;9(8).
    PMID: 30970992 DOI: 10.3390/polym9080314
    Halloysite nanotubes (HNTs)-polyester nanocomposites with four different concentrations were produced using solution casting technique and the biodegradation effect of short-term seawater exposure (120 h) was studied. Monolithic polyester was observed to have the highest seawater absorption with 1.37%. At 0.3 wt % HNTs reinforcement, the seawater absorption dropped significantly to the lowest value of 0.77% due to increase of liquid diffusion path. For samples tested in dry conditions, the Tg, storage modulus, tensile properties and flexural properties were improved. The highest improvement of Tg was from 79.3 to 82.4 °C (increase 3.1 °C) in the case of 0.3 wt % HNTs. This can be associated with the exfoliated HNTs particles, which restrict the mobility of polymer chains and thus raised the Tg. After seawater exposure, the Tg, storage modulus, tensile properties and flexural properties of polyester and its nanocomposites were decreased. The Young's modulus of 0.3 wt % HNTs-polyester dropped 20% while monolithic polyester dropped up to 24% compared to their values in dry condition. Apart from that, 29% flexural modulus reduction was observed, which was 18% higher than monolithic polyester. In contrast, fracture toughness and surface roughness increased due to plasticization effect. The presence of various microbial communities caused gradual biodegradation on the microstructure of the polyester matrix as also evidently shown by SEM images.
    Matched MeSH terms: Seawater
  10. Alhawari ARH, Majeed SF, Saeidi T, Mumtaz S, Alghamdi H, Hindi AT, et al.
    Micromachines (Basel), 2021 Apr 07;12(4).
    PMID: 33917167 DOI: 10.3390/mi12040411
    The increasing needs of free licensed frequency bands like Industrial, Scientific, and Medical (ISM), Wireless Local Area Network (WLAN), and 5G for underwater communications required more bandwidth (BW) with higher data transferring rate. Microwaves produce a higher transferring rate of data, and their associated devices are smaller in comparison with sonar and ultrasonic. Thus, transceivers should have broad BW to cover more of a frequency band, especially from ultra-wideband (UWB) systems, which show potential outcomes. However, previous designs of similar work for underwater communications were very complicated, uneasy to fabricate, and large. Therefore, to overcome these shortcomings, a novel compact elliptical UWB antenna is designed to resonate from 1.3 to 7.2 GHz. It is invented from a polytetrafluoroethylene (PTFE) layer with a dielectric constant of 2.55 mm and a thickness of 0.8 mm. The proposed antenna shows higher gain and radiation efficiency and stability throughout the working band when compared to recent similarly reported designs, even at a smaller size. The characteristics of the functioning antenna are investigated through fluid mediums of fresh-water, seawater, distilled water, and Debye model water. Later, its channel capacity, bit rate error, and data rate are evaluated. The results demonstrated that the antenna offers compact, easier fabrication with better UWB characteristics for underwater 5G communications.
    Matched MeSH terms: Seawater
  11. Assikin Muhamad, Aishath Azna Ali, Firdaus Hayati, Andee Dzulkarnaen Zakaria
    MyJurnal
    Penetrating injury to the abdominal viscera is not uncommon unless when it is caused by marine life. We present a 39-year-old fisherman from a tropical country who had sustained a penetrating injury from a stab wound to the abdomen due to needlefish impalement. He sustained a small perforation of the sigmoid colon during exploratory laparotomy and primary repair was done. Although this incident is rare, there are cases involving seawater activities either for leisure, sport or diving for fishing. We highlight this rare incident and discuss the management plan.
    Matched MeSH terms: Seawater
  12. MUHAMMAD SAFIY SABRIL, MUHAMMAD SAFIY SABRIL, FAEZAH JASMAN, NURUL ADILAH ABDUL LATIFF, SEVIA MAHDALIZA IDRUS, WAN HAFIZA WAN HASSAN
    MyJurnal
    Underwater wireless communications refer to transmitting data in an unguided water environment by wireless carriers including acoustic, radio frequency (RF), and optical waves. Relative to acoustic and RF, the optical wave is more promising to offer higher bandwidth at a lower energy consumption rate. However, an optical wave has its challenges such as attenuation due to absorption, scattering and turbulence effects. Therefore, this work attempts to investigate the performance of lightwave propagation for underwater optical wireless communication (UOWC) using simulation and experimental approaches. First, the performance of optical waves was analyzed using MATLAB by simulating the light attenuation model which based on depth-dependent chlorophyll concentration. A depth profile that related to the surface chlorophyll levels for the range 0-4 mg/m3 was used to represent the open ocean. The simulation showed that the attenuation of light less affected for operating wavelength range of 450 – 550 nm. Further, an experimental set-up was developed which consists of a transmitter, receiver, and aquarium to emulate the UOWC channel. Three types of water including clear, sea and cloudy were tested to analyze their interaction with the light emitted by a light-emitting diode (LED) and a laser diode. The emitted light detected by the light sensor and the strength of an audio signal transmitted through the UOWC were measured using a light meter and sound meter respectively. The measured power was plotted against distance and the attenuation constant c was deduced through curve fitting method. The analysis showed irrespective of the light sources, UOWC in cloudy water suffered the highest attenuation relative to still clear and seawater. The received power emitted by laser was at least 41% higher than the LED. This study contributes to identify the potential and limitations of different operating schemes to optimize UOWC performance.
    Matched MeSH terms: Seawater
  13. NUR FIKRIAH HASHIM, NURAQILAH MOHD ZAINAL, NURAIN JAMIL, NURUL NASUHA MOHD NOR, SURIANI MAT JUSOH
    MyJurnal
    Nowadays, Kenaf fiber is sustainably useful in marine structures and has become one of the materials that may be high in demand as it is light, biodegradable and environmental friendly. This study investigates the effect of fiber percentage on compressive strength of fiber reinforced concrete (FRC) and the relationship between compressive strength and time of FRC immersion in seawater. FRC concrete cubes were prepared using four different percentage of fiber (0%, 1.5%, 3.0% and 4.5%). These FRC were immersed in seawater for 7, 14 and 21 days for three consecutive weeks. Based on the experiment, it was found that there was improvement in compressive strength of FRC when compared to plain cement concrete. The results showedthat 3.0% of KF to cement matrix concrete determined the highest compressive strength of 205.43 Pa while 0% of KF fiber to cement concrete matrix (control specimen) showed the lowest compressive strength of 158.28 Pa. Also the addition of Kenaf fiber to cement concrete decreased the seawater absorption more than concrete with absolutely 0% of KF fiber to cement concrete (control specimen). In conclusion, the results did show significant improvement and a consistent trend on strength with the addition of FRC. This study also revealed that the percentage of water absorption was on the increase for 0, 7 and 14 days and become constant after day 21. This is due to manufacturing defects that occurred which block the water from entering the material and making the material absorb less water.
    Matched MeSH terms: Seawater
  14. Zaifol Samsu, Muhamad Daud, Siti Radiah Mohd Kamarudin, Nur Ubaidah Saidin, Abdul Aziz Mohamed, Mohd Sa’ari Ripin, et al.
    MyJurnal
    Boundary element method (BEM) is a numerical technique that used for modeling infinite domain as is the case for galvanic corrosion analysis. The use of boundary element analysis system (BEASY) has allowed cathodic protection (CP) interference to be assessed in terms of the normal current density, which is directly proportional to the corrosion rate. This paper was present the analysis of the galvanic corrosion between Aluminium and Carbon Steel in natural sea water. The result of experimental was validated with computer simulation like BEASY program. Finally, it can conclude that the BEASY software is a very helpful tool for
    future planning before installing any structure, where it gives the possible CP interference on any nearby unprotected metallic structure.
    Matched MeSH terms: Seawater
  15. CHIN, W. L., ANTON, A., KUMAR, S.V., TEOH, P. L.
    MyJurnal
    In Malaysia, harmful algal blooms often occur along the coastal waters of west Sabah, where one of the causative organisms is the toxin-producing dinoflagellate, Pyrodinium bahamense var. compressum. A total of five P. bahamense var. compressum isolates were obtained from four locations and were cultured in f/2 medium. A Polymerase Chain Reaction (PCR) based technique was developed and used to screen for the presence of the dinoflagellate, P. bahamense var. compressum. A dinoflagellate-specific primer pair was designed based on sequences of P. bahamense var. compressum to amplify the 18S small subunit ribosomal DNA (rDNA) sequences. The rDNA of the P. bahamense var. compressum isolates were obtained. A species-specific primer pair was designed to target a 600 bp rDNA sequence of the target dinoflagellate. The primer pair targeting P. bahamense var. compressum did not yield any product with the fifteen algae cultures used as negative controls, but only amplified the rDNA of P. bahamense var. compressum cultures. The PCR method for identification of P. bahamense var. compressum was also applied on twenty field samples collected with plankton net. P. bahamense var. compressum cells were detected by PCR in five field samples and were confirmed by direct sequencing. From this study, a species-specific primer pair was obtained to identify the target species, P. bahamense var. compressum, among the natural complex communities of seawater.
    Matched MeSH terms: Seawater
  16. Daud, M., Mohd Kamarudin, S.R., Samsu, Z., Ripin, M.S., Sattar, M.S., Rejab, R.
    MyJurnal
    The corrosion behaviour of ternary aluminium alloy sacrificial anodes with small amount addition of tin as depassivating element in natural seawater was studied by means of conventional DC electrochemical measurements. Metallurgical microscope was employed in order to observe the changing of microstructure caused by tin present in ternary alloys. The relationship between microstructure and electrochemical results was examined and particular attention paid to the cause of the electrochemical efficiency of anode performance. The results indicate that the proper precipitates uniformly distributed of tin are influence on improving electrochemical performance of alumnium alloy anode.
    Matched MeSH terms: Seawater
  17. Tahir D, Shariff M, Syukri F, Yusoff FM
    Vet World, 2018 Mar;11(3):327-331.
    PMID: 29657425 DOI: 10.14202/vetworld.2018.327-331
    Background and Aim: Brown-marbled grouper Epinephelus fuscoguttatus is a premium marine food fish with high demand in Asia. In fish, stress due to environmental changes such as fluctuations in the salinity can result in increased cortisol level. Stress in fish increases susceptibility to diseases ultimately resulting in death. Therefore, the aim of this study was to investigate the salinity tolerance of E. fuscoguttatus and their survival in lower salinities.

    Materials and Methods: In this study, grouper juveniles (92.43±standard error of the mean 0.51 mm) maintained in 31 ppt seawater were transferred into five tanks with seawater diluted to 25, 20, 15, 10, and 5 ppt. The salinity of the control group was not changed and was maintained at 31 ppt. Serum cortisol was measured using ELISA at 0, 30, 60, and 120 min after the fish were transferred to the different concentrations of salinity.

    Results: The survival percentage was recorded for 14 days following the transfer and the results revealed that serum cortisol of fish in a high change in salinity (15, 10, and 5 ppt) was significantly higher than the control group immediately after exposure. At the high salinity change, the cortisol levels gradually decrease at 30 min and 60 min, until no difference in cortisol concentration was observed at 120 min. No mortality was observed in fish exposed to low salinity change (25 and 20 ppt) while in higher salinity change (5 ppt), the survival percentage was 50%.

    Conclusion: The study revealed that the serum cortisol concentration was high initially and continues to decrease to resting cortisol level at 120 min indicating that cortisol hormone is released following acute stress as a primary response in grouper juveniles.

    Matched MeSH terms: Seawater
  18. Khan MF, Maulud KNA, Latif MT, Chung JX, Amil N, Alias A, et al.
    Sci Total Environ, 2018 Feb 01;613-614:1401-1416.
    PMID: 29898507 DOI: 10.1016/j.scitotenv.2017.08.025
    Air pollution can be detected through rainwater composition. In this study, long-term measurements (2000-2014) of wet deposition were made to evaluate the physicochemical interaction and the potential sources of pollution due to changes of land use. The rainwater samples were obtained from an urban site in Kuala Lumpur and a highland-rural site in the middle of Peninsular Malaysia. The compositions of rainwater were obtained from the Malaysian Meteorological Department. The results showed that the urban site experienced more acidity in rainwater (avg=277mm, range of 13.8 to 841mm; pH=4.37) than the rural background site (avg=245mm, range of 2.90 to 598mm; pH=4.97) due to higher anthropogenic input of acid precursors. The enrichment factor (EF) analysis showed that at both sites, SO42-, Ca2+ and K+ were less sensitive to seawater but were greatly influenced by soil dust. NH4+ and Ca2+ can neutralise a larger fraction of the available acid ions in the rainwater at the urban and rural background sites. However, acidifying potential was dominant at urban site compared to rural site. Source-receptor relationship via positive matrix factorisation (PMF 5.0) revealed four similar major sources at both sites with a large variation of the contribution proportions. For urban, the major sources influence on the rainwater chemistry were in the order of secondary nitrates and sulfates>ammonium-rich/agricultural farming>soil components>marine sea salt and biomass burning, while at the background site the order was secondary nitrates and sulfates>marine sea salt and biomass burning=soil components>ammonia-rich/agricultural farming. The long-term trend showed that anthropogenic activities and land use changes have greatly altered the rainwater compositions in the urban environment while the seasonality strongly affected the contribution of sources in the background environment.
    Matched MeSH terms: Seawater
  19. Ariffin MM, Adiana G, Bidai J, Hing LS, Nurulnadia MY, Ong MC, et al.
    Data Brief, 2019 Dec;27:104806.
    PMID: 31788520 DOI: 10.1016/j.dib.2019.104806
    Metals are natural elements existed in the environment. However, due to the rapid development of urbanisation and economic, high content of anthropogenic metals are being perceived in polluting the environment. The oceans are known to be a part of the sinking basin for anthropogenic metals ends. Dataset provided is purposely to give an overview of dissolved metals spatial distribution in the South China Sea off the east Peninsular of Malaysia during the pre-, post- and Northeast (NE) Monsoon period. Seawater samples were collected in a grid of 18 stations at 3 different water depth. Dissolved metals were pre-concentrated on-board ship using Chelex-100 resin and analysed using Inductively Coupled Plasma Mass Spectrophotometry (ICPMS). The dataset shows the effect of NE Monsoon on dissolved metals spatial distribution mainly at the area closer to the land. Therefore, this dataset could reveal the past information on anthropogenic metals intrusion in the South China Sea, since Terengganu state was recently pointed to be one of the Malaysian waterfront city. Additionally, this dataset also could help in studying the cycle of metals in the southern South China Sea waters.
    Matched MeSH terms: Seawater
  20. Fathul Karim Sahrani, Zaharah Ibrahim, Madzlan Aziz, Adibah Yahya
    Corrosion caused by sulphate-reducing bacteria (SRB) isolated from seawater nearby to Pasir Gudang has been studied. The test coupon was a AISI 304 stainless steel. Potential and corrosion rate measurements were carried out in various types of culturing solutions, with SRB1, SRB2, combination of SRB1 & SRB2 and without SRBs inoculated (sterilized). From Tafel plots a higher corrosion rate has been found in medium inoculated with SRBs than that of the sterilized medium (control). When SRBs were present in the medium, the Tafel plot shifted towards more negative values (Ecorr was shifted to much less anodic values) and increase in current density compared to that of the sterilized medium (control). Localized corrosion was observed on the metal surface, and it was associated to the SRB activity. X-ray analysis (EDAX) showed that the corrosion product has higher content of sulphur for medium containing SRBs than that of the sterilized medium. X-Ray Diffraction analysis carried out on corrosion products which showed the presence of iron sulphide. This indicates the influence of the presence of SRB in corrosion process.
    Matched MeSH terms: Seawater
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links