Displaying publications 61 - 80 of 2314 in total

Abstract:
Sort:
  1. Jaganathan SK, Mani MP
    3 Biotech, 2018 Aug;8(8):327.
    PMID: 30073112 DOI: 10.1007/s13205-018-1356-2
    In this study, a wound dressing based on polyurethane (PU) blended with copper sulphate nanofibers was developed using an electrospinning technique. The prepared PU and PU nanocomposites showed smooth fibers without any bead defects. The prepared nanocomposites showed smaller fiber (663 ± 156.30 nm) and pore (888 ± 70.93 nm) diameter compared to the pristine PU (fiber diameter 1159 ± 147.48 nm and pore diameter 1087 ± 62.51 nm). The interaction of PU with copper sulphate was evident in the infrared spectrum through hydrogen-bond formation. Thermal analysis displayed enhanced weight residue at higher temperature suggesting interaction of PU with copper sulphate. The contact angle measurements revealed the hydrophilic nature of the prepared nanocomposites (71° ± 2.309°) compared with pure PU (100° ± 0.5774°). The addition of copper sulphate into the PU matrix increased the surface roughness, as revealed in the atomic force microscopy (AFM) analysis. Mechanical testing demonstrated the enhanced tensile strength behavior of the fabricated nanocomposites (18.58 MPa) compared with the pristine PU (7.12 MPa). The coagulation assays indicated the enhanced blood compatibility of the developed nanocomposites [activated partial thromboplastin time (APTT)-179 ± 3.606 s and partial thromboplastin time (PT)-105 ± 2.646 s] by showing a prolonged blood clotting time compared with the pristine PU (APTT-147.7 ± 3.512 s and PT-84.67 ± 2.517 s). Furthermore, the hemolysis and cytotoxicity studies suggested a less toxicity nature of prepared nanocomposites by displaying low hemolytic index and enhanced cell viability rates compared with the PU membrane. It was observed that the fabricated novel wound dressing possesses better physicochemical and enhanced blood compatibility properties, and may be utilized for wound-healing applications.
    Matched MeSH terms: Partial Thromboplastin Time; Whole Blood Coagulation Time
  2. Sweeti, Joshi D, Panigrahi BK, Anand S, Santhosh J
    J Med Eng Technol, 2018 Feb;42(2):113-120.
    PMID: 29448856 DOI: 10.1080/03091902.2018.1433244
    Selective visual attention is the ability to selectively pay attention to the targets while inhibiting the distractors. This paper aims to study the targets and non-targets interplay in spatial attention task while subject attends to the target object present in one visual hemifield and ignores the distractor present in another visual hemifield. This paper performs the averaged evoked response potential (ERP) analysis and time-frequency analysis. ERP analysis agrees to the left hemisphere superiority over late potentials for the targets present in right visual hemifield. Time-frequency analysis performed suggests two parameters i.e. event-related spectral perturbation (ERSP) and inter-trial coherence (ITC). These parameters show the same properties for the target present in either of the visual hemifields but show the difference while comparing the activity corresponding to the targets and non-targets. In this way, this study helps to visualise the difference between targets present in the left and right visual hemifields and, also the targets and non-targets present in the left and right visual hemifields. These results could be utilised to monitor subjects' performance in brain-computer interface (BCI) and neurorehabilitation.
    Matched MeSH terms: Reaction Time/physiology
  3. Lim A, Eng V, Janssen SMJ, Satel J
    Exp Brain Res, 2018 05;236(5):1369-1382.
    PMID: 29520444 DOI: 10.1007/s00221-018-5225-3
    Inhibition of return (IOR) refers to an increase in reaction times to targets that appeared at a previously cued location relative to an uncued location, often investigated using a spatial cueing paradigm. Despite numerous studies that have examined many aspects of IOR, the neurophysiological mechanisms underlying IOR are still in dispute. The objective of the current research is to investigate the plausible mechanisms by manipulating the cue and target types between central and peripheral stimuli in a traditional cue-target paradigm with saccadic responses to targets. In peripheral-cueing conditions, we observed inhibitory cueing effects across all cue-target onset asynchronies (CTOAs) with peripheral targets, but IOR was smaller and arose later with central targets. No inhibition was observed in central-cueing conditions at any CTOAs. Empirical data were simulated using a two-dimensional dynamic neural field model. Our results and simulations support previous work demonstrating that, at short CTOAs, behavioral inhibition is only observed with repeated stimulation-an effect of sensory adaptation. With longer CTOAs, IOR is observed regardless of target type when peripheral cueing is used. Our findings suggest that behaviorally exhibited inhibitory cueing effects can be attributed to multiple mechanisms, including both attenuation of visual stimulation and local inhibition in the superior colliculus.
    Matched MeSH terms: Reaction Time/physiology*
  4. Rashid SA, Nazakat R, Muhamad Robat R, Ismail R, Suppiah J, Rajendran K, et al.
    Front Public Health, 2023;11:1208348.
    PMID: 37965510 DOI: 10.3389/fpubh.2023.1208348
    Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) may transmit through airborne route particularly when the aerosol particles remain in enclosed spaces with inadequate ventilation. There has been no standard recommended method of determining the virus in air due to limitations in pre-analytical and technical aspects. Furthermore, the presence of low virus loads in air samples could result in false negatives. Our study aims to explore the feasibility of detecting SARS-CoV-2 ribonucleic acid (RNA) in air samples using droplet digital polymerase chain reaction (ddPCR). Active and passive air sampling was conducted between December 2021 and February 2022 with the presence of COVID-19 confirmed cases in two hospitals and a quarantine center in Klang Valley, Malaysia. SARS-CoV-2 RNA in air was detected and quantified using ddPCR and real-time reverse transcriptase-polymerase chain reaction (RT-PCR). The comparability of two different digital PCR platforms (QX200 and QIAcuity) to RT-PCR were also investigated. Additionally negative staining transmission electron microscopy was performed to visualize virus ultrastructure. Detection rates of SARS-CoV-2 in air samples using ddPCR were higher compared to RT-PCR, which were 15.2% (22/145) and 3.4% (5/145), respectively. The sensitivity and specificity of ddPCR was 100 and 87%, respectively. After excluding 17 negative samples (50%) by both QX200 and QIAcuity, 15% samples (5/34) were found to be positive both ddPCR and dPCR. There were 23.5% (8/34) samples that were detected positive by ddPCR but negative by dPCR. In contrast, there were 11.7% (4/34) samples that were detected positive by dPCR but negative by ddPCR. The SARS-CoV-2 detection method by ddPCR is precise and has a high sensitivity for viral RNA detection. It could provide advances in determining low viral titter in air samples to reduce false negative reports, which could complement detection by RT-PCR.
    Matched MeSH terms: Real-Time Polymerase Chain Reaction/methods
  5. Mohd Ali MR, Lih Huey L, Foo PC, Goay YX, Ismail AS, Mustaffa KMF, et al.
    Biomed Res Int, 2019;2019:9451791.
    PMID: 31355287 DOI: 10.1155/2019/9451791
    Melioidosis and leptospirosis, caused by two different bacteria, Burkholderia pseudomallei and Leptospira spp., are potentially fatal infections that share a very similar spectrum of clinical features and cause significant mortality and morbidity in humans and livestock. Early detection is important for better clinical consequences. To our knowledge, there is no diagnostic tool available to simultaneously detect and differentiate melioidosis and leptospirosis in humans and animals. In this study, we described a duplex TaqMan probe-based qPCR for the detection of B. pseudomallei and Leptospira spp. DNA. The performance of the assay was evaluated on 20 B. pseudomallei isolates, 23 Leptospira strains, and 39 other microorganisms, as well as two sets of serially diluted reference strains. The duplex qPCR assay was able to detect 0.02 pg (~ 4 copies) Leptospira spp. DNA and 0.2 pg (~ 25.6 copies) B. pseudomallei DNA. No undesired amplification was observed in other microorganisms. In conclusion, the duplex qPCR assay was sensitive and specific for the detection of B. pseudomallei & Leptospira spp. DNA and is suitable for further analytical and clinical evaluation.
    Matched MeSH terms: Real-Time Polymerase Chain Reaction*
  6. Kho SK, Keeble D, Wong HK, Estudillo AJ
    Soc Neurosci, 2023 Dec;18(6):393-406.
    PMID: 37840302 DOI: 10.1080/17470919.2023.2263924
    Successful face recognition is important for social interactions and public security. Although some preliminary evidence suggests that anodal and cathodal transcranial direct current stimulation (tDCS) might modulate own- and other-race face identification, respectively, the findings are largely inconsistent. Hence, we examined the effect of both anodal and cathodal tDCS on the recognition of own- and other-race faces. Ninety participants first completed own- and other-race Cambridge Face Memory Test (CFMT) as baseline measurements. Next, they received either anodal tDCS, cathodal tDCS or sham stimulation and finally they completed alternative versions of the own- and other-race CFMT. No difference in performance, in terms of accuracy and reaction time, for own- and other-race face recognition between anodal tDCS, cathodal tDCS and sham stimulation was found. Our findings cast doubt upon the efficacy of tDCS to modulate performance in face identification tasks.
    Matched MeSH terms: Reaction Time/physiology
  7. Ghadiry M, Gholami M, Kong LC, Yi CW, Ahmad H, Alias Y
    Sensors (Basel), 2015;16(1).
    PMID: 26729115 DOI: 10.3390/s16010039
    An on-chip optical humidity sensor using Nano-anatase TiO₂ coating is presented here. The coating material was prepared so that the result is in solution form, making the fabrication process quick and simple. Then, the solution was effortlessly spin-coated on an SU8 straight channel waveguide. Investigating the sensitivity and performance (response time) of the device revealed a great linearity in the wide range (35% to 98%) of relative humidity (RH). In addition, a variation of more than 14 dB in transmitted optical power was observed, with a response time of only ~0.7 s. The effect of coating concentration and UV treatment was examined on the performance and repeatability of the sensor. Interesting observations were found, and the attributed mechanisms were described. In addition, the proposed sensor was extensively compared with other state-of-the-art proposed counterparts from the literature and remarkable advantages were found. Since a high sensitivity of ~0.21 dB/%RH and high dynamic performances were demonstrated, this sensor is proposed for use in biomedical applications.
    Matched MeSH terms: Reaction Time
  8. Jayabal S, Pandikumar A, Lim HN, Ramaraj R, Sun T, Huang NM
    Analyst, 2015 Apr 21;140(8):2540-55.
    PMID: 25738185 DOI: 10.1039/c4an02330g
    Gold nanorods (Au NRs) are elongated nanoparticles with unique optical properties which depend on their shape anisometry. The Au NR-based longitudinal localized surface plasmon resonance (longitudinal LSPR) band is very sensitive to the surrounding local environment and upon the addition of target analytes, the interaction between the analytes and the surface of the Au NRs leads to a change in the longitudinal LSPR band. This makes it possible to devise Au NR probes with application potential to the detection of toxic metal ions with an improved limit of detection, response time, and selectivity for the fabrication of sensing devices. The effective surface modification of Au NRs helps in improving their selectivity and sensitivity toward the detection of toxic metal ions. In this review, we discuss different methods for the preparation of surface modified Au NRs for the detection of toxic metal ions based on the LSPR band of the Au NRs and the types of interactions between the surface of Au NRs and metal ions. We summarize the work that has been done on Au NR-based longitudinal LSPR detection of environmentally toxic metal ions, sensing mechanisms, and the current progress in various modified Au NR-based longitudinal LSPR sensors for toxic metal ions. Finally, we discuss the applications of Au NR-based longitudinal LSPR sensors to real sample analysis and some of the future challenges facing longitudinal LSPR-based sensors for the detection of toxic metal ions toward commercial devices.
    Matched MeSH terms: Reaction Time
  9. Moradi M, Rezazadeh J, Ismail AS
    Sensors (Basel), 2012;12(4):4352-80.
    PMID: 22666034 DOI: 10.3390/s120404352
    Underwater Wireless Sensor Networks (UWSNs) provide new opportunities to observe and predict the behavior of aquatic environments. In some applications like target tracking or disaster prevention, sensed data is meaningless without location information. In this paper, we propose a novel 3D centralized, localization scheme for mobile underwater wireless sensor network, named Reverse Localization Scheme or RLS in short. RLS is an event-driven localization method triggered by detector sensors for launching localization process. RLS is suitable for surveillance applications that require very fast reactions to events and could report the location of the occurrence. In this method, mobile sensor nodes report the event toward the surface anchors as soon as they detect it. They do not require waiting to receive location information from anchors. Simulation results confirm that the proposed scheme improves the energy efficiency and reduces significantly localization response time with a proper level of accuracy in terms of mobility model of water currents. Major contributions of this method lie on reducing the numbers of message exchange for localization, saving the energy and decreasing the average localization response time.
    Matched MeSH terms: Reaction Time
  10. Abdullah WZ, Moufak SK, Yusof Z, Mohamad MS, Kamarul IM
    Transl Res, 2010 Jun;155(6):315-9.
    PMID: 20478546 DOI: 10.1016/j.trsl.2010.02.001
    Various factors may contribute to a hypercoagulable state and acute vascular thrombosis. A prospective study was conducted involving 165 coronary heart disease (CHD) patients from the Cardiology Unit, Hospital Universiti Sains Malaysia. The purpose of this study was to investigate the relationship among factor VIII (FVIII), prothrombin time (PT), activated partial thromboplastin time (APTT), and activated protein C resistance (APC-R) state among CHD patients and to look for potential clinical applications from these laboratory findings. There were 110 cases diagnosed as acute coronary syndrome (ACS), whereas another 55 were stable coronary artery disease (SCAD) patients. PT, APTT, FVIII, and APC-R assays were performed on all subjects. There was a significant difference between the FVIII level and the APTT results (P value < 0.0001). A negative relationship was found between the FVIII level and the APTT from linear regression analysis (R(2) = 10%, P value < 0.0001). For each 1% increase in the FVIII level, the APTT was reduced by 0.013 s (95% confidence interval (CI) between -0.019 and -0.007). Interestingly, none of the SCAD patients had abnormally short APTT. Approximately 68.4% of cases with a positive APC-R assay were found to have a high FVIII level. In conclusion, the APTT test is a potential hemostatic marker for hypercoagulable state including in arterial thrombosis.
    Study site: Cardiology unit (outpatient and inpatient), Hospital Universisti Sains Malaysia (HUSM), Kelantan, Malaysia
    Matched MeSH terms: Partial Thromboplastin Time/statistics & numerical data*; Prothrombin Time; Time Factors
  11. Khang TF, Lau CY
    PeerJ, 2015;3:e1360.
    PMID: 26539333 DOI: 10.7717/peerj.1360
    Background. A common research goal in transcriptome projects is to find genes that are differentially expressed in different phenotype classes. Biologists might wish to validate such gene candidates experimentally, or use them for downstream systems biology analysis. Producing a coherent differential gene expression analysis from RNA-seq count data requires an understanding of how numerous sources of variation such as the replicate size, the hypothesized biological effect size, and the specific method for making differential expression calls interact. We believe an explicit demonstration of such interactions in real RNA-seq data sets is of practical interest to biologists. Results. Using two large public RNA-seq data sets-one representing strong, and another mild, biological effect size-we simulated different replicate size scenarios, and tested the performance of several commonly-used methods for calling differentially expressed genes in each of them. We found that, when biological effect size was mild, RNA-seq experiments should focus on experimental validation of differentially expressed gene candidates. Importantly, at least triplicates must be used, and the differentially expressed genes should be called using methods with high positive predictive value (PPV), such as NOISeq or GFOLD. In contrast, when biological effect size was strong, differentially expressed genes mined from unreplicated experiments using NOISeq, ASC and GFOLD had between 30 to 50% mean PPV, an increase of more than 30-fold compared to the cases of mild biological effect size. Among methods with good PPV performance, having triplicates or more substantially improved mean PPV to over 90% for GFOLD, 60% for DESeq2, 50% for NOISeq, and 30% for edgeR. At a replicate size of six, we found DESeq2 and edgeR to be reasonable methods for calling differentially expressed genes at systems level analysis, as their PPV and sensitivity trade-off were superior to the other methods'. Conclusion. When biological effect size is weak, systems level investigation is not possible using RNAseq data, and no meaningful result can be obtained in unreplicated experiments. Nonetheless, NOISeq or GFOLD may yield limited numbers of gene candidates with good validation potential, when triplicates or more are available. When biological effect size is strong, NOISeq and GFOLD are effective tools for detecting differentially expressed genes in unreplicated RNA-seq experiments for qPCR validation. When triplicates or more are available, GFOLD is a sharp tool for identifying high confidence differentially expressed genes for targeted qPCR validation; for downstream systems level analysis, combined results from DESeq2 and edgeR are useful.
    Matched MeSH terms: Real-Time Polymerase Chain Reaction
  12. Mohamad NA, Mustafa S, El Sheikha AF, Khairil Mokhtar NF, Ismail A, Ali ME
    J Sci Food Agric, 2016 May;96(7):2344-51.
    PMID: 26441285 DOI: 10.1002/jsfa.7482
    Poor quality and quantity of DNA extracted from gelatin and gelatin capsules often causes failure in the determination of animal species using PCR. Gelatin, which is mainly derived from porcine and bovine, has been a matter of concern among customers in order to fulfill religious obligation and safety precaution against several transmissible infectious diseases associated with bovine species. Thus, optimised DNA extraction from gelatin is very important for successful real-time PCR detection of gelatin species. In this work, the DNA extraction method was optimised in terms of lysis incubation period and inclusion of pre-treatment pH modification of samples.
    Matched MeSH terms: Real-Time Polymerase Chain Reaction
  13. Shen Z, Som AM, Wang F, Jin F, McMillan O, Al-Tabbaa A
    Sci Total Environ, 2016 Jan 15;542(Pt A):771-6.
    PMID: 26551277 DOI: 10.1016/j.scitotenv.2015.10.057
    A field remediation treatment was carried out to examine the long-term effect of biochar on the immobilisation of metals and the revegetation of a contaminated site in Castleford, UK. The extracted concentrations of nickel (Ni) (II) and zinc (Zn) (II) in the carbonic acid leaching tests were reduced by 83-98% over three years. The extracted Ni (II) and Zn (II) concentrations three years after the treatment were comparable to a cement-based treatment study carried out in a parallel manner on the same site. The sequential extraction results indicated that biochar addition (0.5-2%) increased the residue fractions of Ni (II) (from 51% to 61-66%) and Zn (II) (from 7% to 27-35%) in the soils through competitive sorption, which may have resulted in the reduction of leachabilities of Ni (II) (from 0.35% to 0.12-0.15%) and Zn (II) (from 0.12% to 0.01%) in the plots with biochar compared with that without biochar three years after the treatment. The germination of grass in the plots on site failed. Further laboratory pot study suggested that larger amounts of biochar (5% or more) and compost (5% or more) were needed for the success of revegetation on this site. This study suggests the effectiveness and potential of biochar application in immobilising heavy metals in contaminated site in the long term.
    Matched MeSH terms: Time
  14. Tan L, Wang M, Li X, Li H, Zhao J, Qu Y, et al.
    Bioresour Technol, 2016 Jan;200:572-8.
    PMID: 26539970 DOI: 10.1016/j.biortech.2015.10.079
    In this work, fractionation of empty fruit bunch (EFB) by bisulfite pretreatment was studied for the production of bioethanol and high value products to achieve biorefinery of EFB. EFB was fractionated to solid and liquor components by bisulfite process. The solid components were used for bioethanol production by quasi-simultaneous saccharification and fermentation. The liquor components were then converted to furfural by hydrolysis with sulfuric acid. Preliminary results showed that the concentration of furfural was highest at 18.8g/L with 0.75% sulfuric acid and reaction time of 25min. The conversion of xylose to furfural was 82.5%. Furthermore, we attempted to fractionate the liquor into hemicellulose sugars and lignin by different methods for producing potential chemicals, such as xylose, xylooligosaccharide, and lignosulfonate. Our research showed that the combination of bisulfite pretreatment and resin separation could effectively fractionate EFB components to produce bioethanol and other high value chemicals.
    Matched MeSH terms: Reaction Time
  15. Hilles AH, Abu Amr SS, Hussein RA, Arafa AI, El-Sebaie OD
    Waste Manag, 2015 Oct;44:172-7.
    PMID: 26248486 DOI: 10.1016/j.wasman.2015.07.046
    The current study investigated the effects of S2O8(2-) and S2O8(2-)/H2O2 oxidation processes on the biodegradable characteristics of an anaerobic stabilized leachate. Total COD removal efficiency was found to be 46% after S2O8(2-) oxidation (using 4.2 g S2O8(2-)/1g COD0, at pH 7, for 60 min reaction time and at 350 rpm shaking speed), and improved to 81% following S2O8(2-)/H2O2 oxidation process (using 5.88 g S2O8(2-) dosage, 8.63 g H2O2 dosage, at pH 11 and for 120 min reaction time at 350 rpm). Biodegradability in terms of BOD5/COD ratio of the leachate enhanced from 0.09 to 0.1 and to 0.17 following S2O8(2-) and S2O8(2-)/H2O2 oxidation processes, respectively. The fractions of COD were determined before and after each oxidation processes (S2O8(2-) and S2O8(2-)/H2O2). The fraction of biodegradable COD(bi) increased from 36% in raw leachate to 57% and 68% after applying S2O8(2-) and S2O8(2-)/H2O2 oxidation, respectively. As for soluble COD(s), its removal efficiency was 39% and 78% following S2O8(2-) and S2O8(2-)/H2O2 oxidation, respectively. The maximum removal for particulate COD was 94% and was obtained after 120 min of S2O8(2-)/H2O2 oxidation. As a conclusion, S2O8(2-)/H2O2 oxidation could be an efficient method for improving the biodegradability of anaerobic stabilized leachate.
    Matched MeSH terms: Reaction Time
  16. Tuan Mohamood NFA, Zainuddin N, Ahmad Ayob M, Tan SW
    Chem Cent J, 2018 Dec 06;12(1):133.
    PMID: 30523481 DOI: 10.1186/s13065-018-0500-8
    In this study, sago starch was modified in order to enhance its physicochemical properties. Carboxymethylation was used to introduce a carboxymethyl group into a starch compound. The carboxymethyl sago starch (CMSS) was used to prepare smart hydrogel by adding acetic acid into the CMSS powder as the crosslinking agent. The degree of substitution of the CMSS obtained was 0.6410. The optimization was based on the gel content and degree of swelling of the hydrogel. In this research, four parameters were studied in order to optimize the formation of CMSS-acid hydrogel. The parameters were; CMSS concentration, acetic acid concentration, reaction time and reaction temperature. From the data analyzed, 76.69% of optimum gel content was obtained with 33.77 g/g of degree of swelling. Other than that, the swelling properties of CMSS-acid hydrogel in different media such as salt solution, different pH of phosphate buffer saline solution as well as acidic and alkaline solution were also investigated. The results showed that the CMSS-acid hydrogel swelled in both alkaline and salt solution, while in acidic or low pH solution, it tended to shrink and deswell. The production of the hydrogel as a smart material offers a lot of auspicious benefits in the future especially related to swelling behaviour and properties of the hydrogel in different types of media.
    Matched MeSH terms: Reaction Time
  17. Awang H, Hamzah FH, Ahmad MH, Mahmood MF, Wahab A, Embong K, et al.
    Infect Dis (Lond), 2021 05;53(5):390-392.
    PMID: 33512265 DOI: 10.1080/23744235.2021.1876913
    Matched MeSH terms: Real-Time Polymerase Chain Reaction
  18. Loh SH, Chen MK, Fauzi NS, Aziz A, Cha TS
    Sci Rep, 2021 Feb 01;11(1):2720.
    PMID: 33526809 DOI: 10.1038/s41598-021-81609-6
    Conventional microalgae oil extraction applies physicochemical destruction of dry cell biomass prior to transesterification process to produce fatty acid methyl esters (FAMEs). This report presents a simple and rapid direct transesterification (DT) method for FAMEs production and fatty acid profiling of microalgae using freshly harvested biomass. Results revealed that the FAMEs recovered from Chlorella vulgaris were 50.1 and 68.3 mg with conventional oil-extraction-transesterification (OET) and DT method, respectively. While for Messastrum gracile, the FAMEs recovered, were 49.9 and 76.3 mg, respectively with OET and DT methods. This demonstrated that the DT method increased FAMEs recovery by 36.4% and 53.0% from C. vulgaris and M. gracile, respectively, as compared to OET method. Additionally, the DT method recovered a significantly higher amount of palmitic (C16:0) and stearic (C18:0) acids from both species, which indicated the important role of these fatty acids in the membranes of cells and organelles. The DT method performed very well using a small volume (5 mL) of fresh biomass coupled with a shorter reaction time (~ 15 min), thus making real-time monitoring of FAMEs and fatty acid accumulation in microalgae culture feasible.
    Matched MeSH terms: Reaction Time
  19. Ng DC, Chin L, Choo PPL, Paramasivam U
    BMJ Case Rep, 2021 May 31;14(5).
    PMID: 34059550 DOI: 10.1136/bcr-2021-243783
    We report a case of COVID-19 in a 29-week preterm infant. This child is the youngest reported case of SARS-CoV-2 infection in Malaysia, and to the best of our knowledge, one of the youngest documented cases of established vertical transmission of SARS-CoV-2 reported in literature. Our report highlights the clinical course, timelines of viral shedding by real-time reverse transcription-PCR and antibody seroconversion in a premature infant infected with SARS-CoV-2. In addition, we discuss the challenges faced in managing a preterm infant infected with SARS-CoV-2 and the knowledge gaps that need to be explored.
    Matched MeSH terms: Real-Time Polymerase Chain Reaction
  20. Reeves A, Seluakumaran K, Scharf B
    J Acoust Soc Am, 2021 05;149(5):3352.
    PMID: 34241123 DOI: 10.1121/10.0004786
    A contralateral "cue" tone presented in continuous broadband noise both lowers the threshold of a signal tone by guiding attention to it and raises its threshold by interference. Here, signal tones were fixed in duration (40 ms, 52 ms with ramps), frequency (1500 Hz), timing, and level, so attention did not need guidance. Interference by contralateral cues was studied in relation to cue-signal proximity, cue-signal temporal overlap, and cue-signal order (cue after: backward interference, BI; or cue first: forward interference, FI). Cues, also ramped, were 12 dB above the signal level. Long cues (300 or 600 ms) raised thresholds by 5.3 dB when the signal and cue overlapped and by 5.1 dB in FI and 3.2 dB in BI when cues and signals were separated by 40 ms. Short cues (40 ms) raised thresholds by 4.5 dB in FI and 4.0 dB in BI for separations of 7 to 40 ms, but by ∼13 dB when simultaneous and in phase. FI and BI are comparable in magnitude and hardly increase when the signal is close in time to abrupt cue transients. These results do not support the notion that masking of the signal is due to the contralateral cue onset/offset transient response. Instead, sluggish attention or temporal integration may explain contralateral proximal interference.
    Matched MeSH terms: Time Factors
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links