Displaying publications 61 - 80 of 105 in total

Abstract:
Sort:
  1. Nezhadahmadi A, Prodhan ZH, Faruq G
    ScientificWorldJournal, 2013;2013:610721.
    PMID: 24319376 DOI: 10.1155/2013/610721
    Drought is one of the most important phenomena which limit crops' production and yield. Crops demonstrate various morphological, physiological, biochemical, and molecular responses to tackle drought stress. Plants' vegetative and reproductive stages are intensively influenced by drought stress. Drought tolerance is a complicated trait which is controlled by polygenes and their expressions are influenced by various environmental elements. This means that breeding for this trait is so difficult and new molecular methods such as molecular markers, quantitative trait loci (QTL) mapping strategies, and expression patterns of genes should be applied to produce drought tolerant genotypes. In wheat, there are several genes which are responsible for drought stress tolerance and produce different types of enzymes and proteins for instance, late embryogenesis abundant (lea), responsive to abscisic acid (Rab), rubisco, helicase, proline, glutathione-S-transferase (GST), and carbohydrates during drought stress. This review paper has concentrated on the study of water limitation and its effects on morphological, physiological, biochemical, and molecular responses of wheat with the possible losses caused by drought stress.
    Matched MeSH terms: Triticum/physiology*
  2. Yeoh SY, Alkarkhi AF, Ramli SB, Easa AM
    Int J Food Sci Nutr, 2011 Jun;62(4):410-7.
    PMID: 21306189 DOI: 10.3109/09637486.2010.539555
    Yellow alkaline noodles (YAN) prepared by partial substitution of wheat flour with soy protein isolate and treated with microbial transglutaminase (MTG) and ribose were investigated during cooking. Cooking caused an increase in lightness but a decrease in redness and yellowness, pH, tensile strength and elasticity values of noodles. The extents of these changes were influenced by formulation and cross-linking treatments. The pH and lightness for YAN-ribose were lowest but the yellowness and redness were the highest whilst the tensile strength and elasticity values remained moderate. For YAN-MTG, the color and pH values were moderate, but tensile strength and elasticity values were the highest. YAN prepared with both cross-linking agents had physical values between YAN-ribose and YAN-MTG. Although certain sensory parameters showed differences in score, the overall acceptability of all 10-min-cooked YAN was similar. It is possible to employ cross-linking agents to improve physical properties of cooked YAN.
    Matched MeSH terms: Triticum*
  3. Kuan YH, Liong MT
    J Agric Food Chem, 2008 Oct 8;56(19):9252-7.
    PMID: 18788708 DOI: 10.1021/jf802011j
    The objective of this study was to evaluate the chemical, physicochemical, and functional properties of agrowastes derived from okara ( Glycine max), corn cob ( Zea mays sp.), wheat straw ( Triticum sp.), and rice husk ( Oryza sativa) for potential applications in foods. The fibrous materials (FM) were treated with alkali to yield fibrous residues (FR). Rice husk contained the highest ash content (FM, 8.56%; FR, 9.04%) and lowest lightness in color (FM, 67.63; FR, 63.46), possibly due to the abundance of mineral constituents. Corn cob contained the highest amount of soluble dietary fiber (SDF), whereas okara had the highest total dietary fiber (TDF). The high dietary fiber fractions of corn cob and okara also contributed to the highest water- and oil-holding capacities, emulsifying activities, and emulsion stabilities for both FM and FR samples. These results indicate that these agrowastes could be utilized as functional ingredients in foods.
    Matched MeSH terms: Triticum/chemistry
  4. Arora S, Steuernagel B, Gaurav K, Chandramohan S, Long Y, Matny O, et al.
    Nat Biotechnol, 2019 02;37(2):139-143.
    PMID: 30718880 DOI: 10.1038/s41587-018-0007-9
    Disease resistance (R) genes from wild relatives could be used to engineer broad-spectrum resistance in domesticated crops. We combined association genetics with R gene enrichment sequencing (AgRenSeq) to exploit pan-genome variation in wild diploid wheat and rapidly clone four stem rust resistance genes. AgRenSeq enables R gene cloning in any crop that has a diverse germplasm panel.
    Matched MeSH terms: Triticum/genetics
  5. Sattar A, Wang X, Abbas T, Sher A, Ijaz M, Ul-Allah S, et al.
    PLoS One, 2021;16(10):e0256984.
    PMID: 34618822 DOI: 10.1371/journal.pone.0256984
    Wheat is an important global staple food crop; however, its productivity is severely hampered by changing climate. Erratic rain patterns cause terminal drought stress, which affect reproductive development and crop yield. This study investigates the potential and zinc (Zn) and silicon (Si) to ameliorate terminal drought stress in wheat and associated mechanisms. Two different drought stress levels, i.e., control [80% water holding capacity (WHC) was maintained] and terminal drought stress (40% WHC maintained from BBCH growth stage 49 to 83) combined with five foliar-applied Zn-Si combinations (i.e., control, water spray, 4 mM Zn, 40 mM Si, 4 mM Zn + 40 mM Si applied 7 days after the initiation of drought stress). Results revealed that application of Zn and Si improved chlorophyll and relative water contents under well-watered conditions and terminal drought stress. Foliar application of Si and Zn had significant effect on antioxidant defense mechanism, proline and soluble protein, which showed that application of Si and Zn ameliorated the effects of terminal drought stress mainly by regulating antioxidant defense mechanism, and production of proline and soluble proteins. Combined application of Zn and Si resulted in the highest improvement in growth and antioxidant defense. The application of Zn and Si improved yield and related traits, both under well-watered conditions and terminal drought stress. The highest yield and related traits were recorded for combined application of Zn and Si. For grain and biological yield differences among sole and combined Zn-Si application were statistically non-significant (p>0.05). In conclusion, combined application of Zn-Si ameliorated the adverse effects of terminal drought stress by improving yield through regulating antioxidant mechanism and production of proline and soluble proteins. Results provide valuable insights for further cross talk between Zn-Si regulatory pathways to enhance grain biofortification.
    Matched MeSH terms: Triticum/physiology*
  6. Townsend AJ, Retkute R, Chinnathambi K, Randall JWP, Foulkes J, Carmo-Silva E, et al.
    Plant Physiol, 2018 Feb;176(2):1233-1246.
    PMID: 29217593 DOI: 10.1104/pp.17.01213
    Photosynthetic acclimation (photoacclimation) is the process whereby leaves alter their morphology and/or biochemistry to optimize photosynthetic efficiency and productivity according to long-term changes in the light environment. The three-dimensional architecture of plant canopies imposes complex light dynamics, but the drivers for photoacclimation in such fluctuating environments are poorly understood. A technique for high-resolution three-dimensional reconstruction was combined with ray tracing to simulate a daily time course of radiation profiles for architecturally contrasting field-grown wheat (Triticum aestivum) canopies. An empirical model of photoacclimation was adapted to predict the optimal distribution of photosynthesis according to the fluctuating light patterns throughout the canopies. While the photoacclimation model output showed good correlation with field-measured gas-exchange data at the top of the canopy, it predicted a lower optimal light-saturated rate of photosynthesis at the base. Leaf Rubisco and protein contents were consistent with the measured optimal light-saturated rate of photosynthesis. We conclude that, although the photosynthetic capacity of leaves is high enough to exploit brief periods of high light within the canopy (particularly toward the base), the frequency and duration of such sunflecks are too small to make acclimation a viable strategy in terms of carbon gain. This suboptimal acclimation renders a large portion of residual photosynthetic capacity unused and reduces photosynthetic nitrogen use efficiency at the canopy level, with further implications for photosynthetic productivity. It is argued that (1) this represents an untapped source of photosynthetic potential and (2) canopy nitrogen could be lowered with no detriment to carbon gain or grain protein content.
    Matched MeSH terms: Triticum/physiology*
  7. Liew KB, Odeniyi MA, Peh KK
    Pharm Dev Technol, 2016;21(3):346-53.
    PMID: 25597618 DOI: 10.3109/10837450.2014.1003657
    Freeze drying technology has not been maximized and reported in manufacturing orally disintegrating films. The aim of this study was to explore the freeze drying technology in the formulation of sildenafil orally disintegrating films and compare the physical properties with heat-dried orally disintegrating film. Central composite design was used to investigate the effects of three factors, namely concentration of carbopol, wheat starch and polyethylene glycol 400 on the tensile strength and disintegration time of the film. Heat-dried films had higher tensile strength than films prepared using freeze-dried method. For folding endurance, freeze-dried films showed improved endurance than heat-dried films. Moreover, films prepared using freeze-dried methods were thicker and had faster disintegration time. Formulations with higher amount of carbopol and starch showed higher tensile strength and thickness whereas formulations with higher PEG 400 content showed better flexibility. Scanning electron microscopy showed that the freeze-dried films had more porous structure compared to the heat-dried film as a result of the release of water molecule from the frozen structure when it was subjected to freeze drying process. The sildenafil film was palatable. The dissolution profiles of freeze-dried and heat-dried films were similar to Viagra® with f2 of 51.04 and 65.98, respectively.
    Matched MeSH terms: Triticum
  8. Azizi P, Rafii MY, Abdullah SN, Nejat N, Maziah M, Hanafi MM, et al.
    Crit Rev Biotechnol, 2016;36(1):165-74.
    PMID: 25198435 DOI: 10.3109/07388551.2014.946883
    The blast fungus, Magnaporthe oryzae, causes serious disease on a wide variety of grasses including rice, wheat and barley. The recognition of pathogens is an amazing ability of plants including strategies for displacing virulence effectors through the adaption of both conserved and variable pathogen elicitors. The pathogen-associated molecular pattern (PAMP)-triggered immunity (PTI) and effector-triggered immunity (ETI) were reported as two main innate immune responses in plants, where PTI gives basal resistance and ETI confers durable resistance. The PTI consists of extracellular surface receptors that are able to recognize PAMPs. PAMPs detect microbial features such as fungal chitin that complete a vital function during the organism's life. In contrast, ETI is mediated by intracellular receptor molecules containing nucleotide-binding (NB) and leucine rich repeat (LRR) domains that specifically recognize effector proteins produced by the pathogen. To enhance crop resistance, understanding the host resistance mechanisms against pathogen infection strategies and having a deeper knowledge of innate immunity system are essential. This review summarizes the recent advances on the molecular mechanism of innate immunity systems of rice against M. oryzae. The discussion will be centered on the latest success reported in plant-pathogen interactions and integrated defense responses in rice.
    Matched MeSH terms: Triticum
  9. Ahmad R, Hussein MZ, Kadir WR, Sarijo SH, Hin TY
    J Agric Food Chem, 2015 Dec 30;63(51):10893-902.
    PMID: 26501358 DOI: 10.1021/acs.jafc.5b03102
    A controlled release formulation for the insect pheromone hexenoic acid (HE) was successfully developed using zinc-layered hydroxide (ZLH) as host material through a simple coprecipitation technique, resulting in the formation of inorganic-organic nanolayered material with sustained release properties. The release of HE from its nanohybrid was found to occur in a controlled manner, governed by a pseudo-second order kinetics model. The maximum amount of HE released from the nanocomposite into solutions at pH 4, 6.5, and 8 was found to be 84, 73, and 83% for 1100 min, respectively. The hexenoate zinc-layered hydroxide nanomaterial (HEN) was found to be nontoxic for plants when green beans and wheat seeds were successfully germinated in all HEN concentrations tested in the experiment, with higher percentage of seed germination and higher radical seed growth as compared to its counter anion, HE. ZLH can be a promising carrier for insect pheromone toward a new generation of environmentally safe pesticide nanomaterial for crop protection.
    Matched MeSH terms: Triticum
  10. Al Harthy, K. M., Siti Aishah, H., Yahya, A., Roslan, I., Al Yahyai, R.
    MyJurnal
    Banana is one of the most important food crops after rice, wheat and corn around the world. It is susceptible to a wide spectrum of non-infectious problems such as abiotic stresses resulting in restricting growth and production. Studies were conducted to determine the effects of four salinity levels (0.17 (control), 3.0, 6.0, and 9.0 dS m-1) on morphological characteristics of four banana cultivars at vegetative growth stage. Banana cultivars from the Cavendish group (Williams, Malindi) and plantains group (FHIA18 and Diwan) were grown in 61 x 76 cm polyethylene bags filled with soil mixture comprising of top soil, sand and peat moss (3:1:2 v/v), with pH ranging from 6 - 6.5 and EC 0.02 mScm-1. The experiment was carried out under a rain-shelter in split-plot design with three replicates. Plants were irrigated manually. Data were collected at 3, 6 and 9 months after transplanting. The results revealed that, the number of leaves, stem height, stem girth and total leaf area were significantly affected by salinity, variety and plant age. Significant interaction was also found between salinity and variety, salinity and plant age, as well as variety and plant age. The morphological characteristics of banana were negatively affected by higher salinity levels (6.0 and 9.0 dS m-1). Under similar salinity level, cultivar Malindi had higher number of leaves, stem height, stem girth and total leaf area as compared to cultivar Williams. Among plantains banana, cultivar FHIA18 was more tolerance to high salinity levels than Diwan cultivar, while Malindi from Cavendish group shows high salt tolerant than Williams. Therefore cultivars Malindi and FHIA18 could be grown in arid and semiarid environment depend on their tolerance to high salinity level above 1.0 dS m-1.
    Matched MeSH terms: Triticum
  11. Rosli, N.A., Azilan, N A., Mahyudin, N.A., Mahmud Ab Rashid, N.K., Meon, F.N.S., Ismail, Z., et al.
    MyJurnal
    Fennel (Foeniculum vulgare Mill.) and coriander (Coriandrum sativum L.) are known to possess good antimicrobial properties. In the present work, spice-infused frozen parathas were formulated to investigate the effect of fennel and coriander on microbial (aerobic mesophilic bacteria, yeast and mould, and Bacillus cereus) reduction and sensory acceptability of frozen paratha throughout the storage at -18°C. The present work was also aimed at determining the relationship between spice concentrations and storage durations on microbiological quality of the samples. Fennel and coriander seed powder were used at concentrations of 2, 4 and 6% of wheat flour (w/w). The microbiological analysis was performed by total plate count, yeast and mould count, and Bacillus cereus count after 9, 12 and 15 weeks of storage. Sensory evaluation was conducted using hedonic scales at the end of storage durations. Results showed that spice infusion in frozen paratha significantly delayed the growth of aerobic mesophilic bacteria, yeasts and moulds, and Bacillus cereus during storage. The lowest log count was demonstrated by coriander at 6% in total plate count (3.85, 3.90 and 3.91 log10 CFU/g), and yeast and mould count (2.54, 2.59 and 2.60 log10 CFU/g) after 9, 12 and 15 weeks, respectively. Bacillus cereus was not detected throughout the storage durations. Fennel exhibited minimum activity against Bacillus cereus with no significant difference on log count reduction when compared with control. Coriander showed the highest decrease in both total plate count and Bacillus cereus count during the storage duration. Sensory evaluation result indicated that control sample exhibited the highest preference over all attributes when compared with fennel and coriander. Coriander-infused paratha was slightly darker in colour due to high concentration of 6%. Fennel yielded the lowest score in terms of taste among all samples. Fennel and coriander showed no significant difference for sensory acceptability. Overall, all frozen parathas were in good quality after 15 weeks of frozen storage. It can thus be concluded that fennel and coriander can be used as potential natural preservatives to inhibit the growth of microorganisms in paratha during frozen storage. Nevertheless, the optimum spice concentration should be determined to minimise the effects on the sensory attributes.
    Matched MeSH terms: Triticum
  12. Tan CH, Chow ZY, Ching SM, Devaraj NK, He FJ, MacGregor GA, et al.
    BMJ Open, 2019 05 01;9(4):e024702.
    PMID: 31048428 DOI: 10.1136/bmjopen-2018-024702
    OBJECTIVE: To determine the salt content in instant noodles sold in Malaysia.

    STUDY DESIGN: A cross-sectional survey was done involving 707 different flavours and packaging of instant noodles sold in six hypermarkets and retailer chains in Malaysia and the corresponding brand's official websites in 2017.

    METHODS: The salt content (gram per serving and per 100 g) was collected from the product packaging and corresponding brand's official website.

    RESULTS: Of the 707 different packaging and flavours of instant noodles, only 62.1% (n=439) provided the salt content in their food label.The mean (±SD) salt per 100 g of instant noodles was 4.3±1.5 g and is nearly four times higher than the salt content of food classified in Malaysia as a high salt content (>1.2 g salt per 100 g). The salt content for instant noodle per packaging ranged from 0.7 to 8.5 g. 61.7% of the instant noodles exceeded the Pacific Salt Reduction Target, 11.8% exceeded the WHO recommended daily salt intake of <5.0 per day and 5.50% exceeded Malaysia Salt Action Target. 98% of instant noodles will be considered as high salt food according to the Malaysia Guidelines.The probability of the instant noodles without mixed flavour (n=324) exceeding the Pacific Salt Reduction Target was tested on univariate and multivariate analysis. Instant noodles with soup, Tom Yam flavour, pork flavour and other flavours were found to be predictors of instant noodles with the tendency to exceed Pacific Salt Reduction Target when compared with instant noodles without mixed flavours (p<0.05).

    CONCLUSION: Only 62% of instant noodles displayed the salt content on their food label. Salt content in instant noodles is very high, with 90% exceeding the daily salt intake recommended by WHO. Prompt action from regulatory and health authorities is needed to reduce the salt content in instant noodles.

    Matched MeSH terms: Triticum
  13. Takenaka S, Weschke W, Brückner B, Murata M, Endo TR
    Front Plant Sci, 2019;10:548.
    PMID: 31114602 DOI: 10.3389/fpls.2019.00548
    Three transgenic HOSUT lines of winter wheat, HOSUT12, HOSUT20, and HOSUT24, each harbor a single copy of the cDNA for the barley sucrose transporter gene HvSUT1 (SUT), which was fused to the barley endosperm-specific Hordein B1 promoter (HO; the HOSUT transgene). Previously, flow cytometry combined with PCR analysis demonstrated that the HOSUT transgene had been integrated into different wheat chromosomes: 7A, 5D, and 4A in HOSUT12, HOSUT20, and HOSUT24, respectively. In order to confirm the chromosomal location of the HOSUT transgene by a cytological approach using wheat aneuploid stocks, we crossed corresponding nullisomic-tetrasomic lines with the three HOSUT lines, namely nullisomic 7A-tetrasomic 7B with HOSUT12, nullisomic 5D-tetrasomic 5B with HOSUT20, and nullisomic 4A-tetrasomic 4B with HOSUT24. We examined the resulting chromosomal constitutions and the presence of the HOSUT transgene in the F2 progeny by means of chromosome banding and PCR. The chromosome banding patterns of the critical chromosomes in the original HOSUT lines showed no difference from those of the corresponding wild type chromosomes. The presence or absence of the critical chromosomes completely corresponded to the presence or absence of the HOSUT transgene in the F2 plants. Investigating telocentric chromosomes occurred in the F2 progeny, which were derived from the respective critical HOSUT chromosomes, we found that the HOSUT transgene was individually integrated on the long arms of chromosomes 4A, 7A, and 5D in the three HOSUT lines. Thus, in this study we verified the chromosomal locations of the transgene, which had previously been determined by flow cytometry, and moreover revealed the chromosome-arm locations of the HOSUT transgene in the HOSUT lines.
    Matched MeSH terms: Triticum
  14. Ho, L.H., Noor Aziah, A.A., Rajeev Bhat
    MyJurnal
    The banana pseudo-stem is not currently utilised in the food industry. The aim of this research was to investigate the chemical and pasting profile of banana pseudo-stem flour (BPF). Wheat flour were substituted with BPF (0, 5, 15 and 30%) and the pasting profile were determined. Results from mineral analysis showed that the levels of sodium (Na), potassium (K), calcium (Ca), magnesium (Mg) and phosphorus (P) were higher than those of iron (Fe), zinc (Zn) and manganese (Mn). The BPF had a 0.04% total titratable acidity (TTA) and a total soluble solid (TSS) of 1.30⁰ Brix with pH 5.41. BPF contained 28.26% total starch, 12.81% resistant starch and a total digestible starch value of 15.45%. An increased substitution level of BPF into wheat flour significantly (p
    Matched MeSH terms: Triticum
  15. Noor Aziah, A. A., Ho, L. H., Noor Shazliana, A. A., Rajeev, B.
    MyJurnal
    Quality attributes of steamed bread without green banana flour (BF) (CON), substituted with 30%
    BF (BBFI) and 30% BF + 8% gluten (BBFII) were determined. The green banana flour (BF) and the mixture of wheat flour (WF) substituted with 30% BF + 8% gluten (FBFII) was significantly highest in water holding capacity and oil holding capacities, respectively. Potassium, calcium and magnesium were significantly higher in BBFI and BBFII than CON. Significantly highest insoluble dietary fibre and total dietary fibre shown in BBFI. Steaming resulted significant reduction in resistant starch content in BBFI as compared with the dough of BBFI I. The specific volume of BBFII and CON showed significant different compared to the BBFI. The BBFII spread ratio was significantly highest and steamer spring lowest than CON. BBFII showed significantly highest in hardness and adhesiveness values but CON was significantly highest in cohesiveness, elasticity and chewiness. L and Hue values was shown highest in CON. BBFII indicated highest acceptability score than other samples.
    Matched MeSH terms: Triticum
  16. Noranizan, M.A., Dzulkifly, M.H., Russly, A.R.
    MyJurnal
    Changes in the physicochemical properties of wheat, sago, tapioca and potato starches were studied
    after heating for 1 hour at 100oC, 110oC, and 120oC and for 2 hours at 120oC. These properties were characterised through the swelling behaviour of starch granules, amount of carbohydrate materials leached from the granules, starch paste retrogradation rate and gel strength. For all starches except wheat, the swelling ability, rate of retrogradation and gel strength decreased while solubility increased with increasing temperature and heating time. Wheat starch followed this pattern only when heated at 120oC for 1 and 2 hours. Gel strength correlated well with the ratio of amylose to amylopectin (R) in the leachate. To produce fried crackers with good expansion properties, the granule has to be sufficiently degraded so as to allow more amylopectin to be leached out to achieve R value of 0.25-0.5. This can be achieved by heating wheat starch at 120oC for 1 hour or longer.
    Matched MeSH terms: Triticum
  17. Ng, K. F., Abbas, F. M. A., Tan, T. C., Azhar, M. E.
    MyJurnal
    Proximate composition, pH and amylose content of ripe Cavendish banana flour (RBF) prepared in this study were compared with all-purpose wheat flour (WF). RBF was found to be significantly (P < 0.05) higher in total carbohydrates and minerals content, while significantly (P < 0.05) lower in protein and fat contents compared with those of WF. Wheat-ripe banana composite flours (W-RBF) prepared by partial substitution of WF with RBF were assessed for swelling power, solubility, pasting properties and gel textural properties. Granular swelling of RBF occurred at a higher temperature compared to that of WF, suggesting that more energy and water were required to cook WF-RBF as the presence of soluble carbohydrates would compete for water and this would eventually delay starch hydration and granular expansion during cooking. Higher substitution with RBF led to higher soluble carbohydrates content, and increase in solubility index of WF-RBF. Partial substitution with RBF also resulted in significant (P < 0.05) decrease in pasting properties. A higher substitution of WF with RBF could reduce starch gelatinisation during cooking and retrogradation owing to the reduction of available starch in WF-RBF. All WF-RBF gels were significantly (P < 0.05) firmer and less sticky compared to WF gels.
    Matched MeSH terms: Triticum
  18. Romero-Güiza MS, Wahid R, Hernández V, Møller H, Fernández B
    Sci Total Environ, 2017 Oct 01;595:651-659.
    PMID: 28402918 DOI: 10.1016/j.scitotenv.2017.04.006
    Lignocellulosic biomasses such as wheat straw are widely used as a feedstock for biogas production. However, these biomasses are mainly composed of a compact fibre structure and therefore, it is recommended to treat them prior to its usage for biogas production in order to improve their bioavailability. The aim of this work is to evaluate, in terms of performance stability, methane yield and economic feasibility, two different scenarios: a mesophilic codigestion of wheat straw and animal manure with or without a low-energy demand alkaline pre-treatment (0.08gKOHgTS-1of wheat straw, for 24h and at 25°C). Besides this, said pre-treatment was also analysed based on the improvement of the bioavailable carbohydrate content in the untreated versus the pre-treated wheat straw. The results pointed out that pre-treated wheat straw prompted a more stable performance (in terms of pH and alkalinity) and an improved methane yield (128% increment) of the mesophilic codigestion process, in comparison to the "untreated" scenario. The pre-treatment increased the content of cellulose, hemicellulose and other compounds (waxes, pectin, oil, etc.) in the liquid fraction, from 5% to 60%, from 11.5% to 39.1% TS and from 57% to 79% of the TS in the liquid fraction for the untreated and pre-treated wheat straws, respectively. Finally, the pre-treated scenario gained an energy surplus of a factor 13.5 and achieved a positive net benefit of 90.4€tVS-WS-1d-1, being a favourable case for an eventual scale-up of the combined process.
    Matched MeSH terms: Triticum
  19. Wan Amir Nizam, W.A., Ng, S.H., Wan Rosli, W.I.
    MyJurnal
    Discovery of novel dietary fibre (DF)-rich food ingredient is of great interest to meet the rising consumer demand for healthy food. Intake of DF-enriched food has been positively associated with a decreased risk of chronic diseases. Pleurotus sajor-caju (PSC), one of the prominent edible mushrooms widely cultivated in Malaysia, is useful for its culinary and medicinal purpose. This study aimed to determine the nutritional, physical, colour and sensorial properties of cinnamon biscuit formulated with PSC powder as partial replacement (0, 4, 8 and 12%) for wheat flour. Results indicated that elevated incorporation levels of PSC powder significantly (P
    Matched MeSH terms: Triticum
  20. Ling CX, Chang YP
    J Food Sci Technol, 2017 Jun;54(7):2041-2049.
    PMID: 28720961 DOI: 10.1007/s13197-017-2641-5
    Guava seeds are produced as a waste product by the guava processing industry. Their high carbohydrate contents may suit the carbohydrate needs of the feed sector but their high dietary fiber content limits their feed value. The feed values of fruit seeds can be improved through germination, which involves the mobilization of nutrients through seed enzymes and alters the seed carbohydrate composition. The changes of selected carbohydrates in guava (Psidium guajava L.) seeds brought by germination to those in red bean (Vigna angularis) and winter wheat (Triticum aestivum L.) were compared. The contents of soluble carbohydrates, digestible starch, resistant starch and cellulose in the seeds were determined. The radial diffusion method was used to detect carbohydrate-degrading enzymes in the seed extracts. Guava seeds were rich in cellulose (402.2 mg/g), which decreased progressively during germination, probably through the action of cellulase. Winter wheat contained the highest starch content (412.2 mg/g) and also distinct quantities of α-amylase and cellulase. The starch contents of all the seeds decreased, but the soluble carbohydrate contents in red beans and guava seeds increased significantly by the end of germination, suggesting the transient oversupply of reserve metabolites. The content of hydrolyzed polysaccharides increased in the germinated seeds with detectable amounts of cellulose-degrading enzymes present, indicating improved value as feed. Further research is warranted to explore the potential of guava seeds as a source of low-cost animal feed supplements.
    Matched MeSH terms: Triticum
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links