MyMedR

Displaying publications 81 - 100 of 150 in total

Abstract:

Sort:

Fulltext Malathion extraction from larvae of Chrysomya megacephala (Fabricius) (Diptera: Calliphoridae) for determining death due to malathion

Mahat NA, Jayaprakash PT, Zafarina Z

Trop Biomed, 2012 Mar;29(1):9-17.
PMID: 22543598 MyJurnal

The use of Chrysomya megacephala larvae for detecting malathion for diagnosing the cause of death was investigated. This could prove useful when the visceral organs have become liquefied during decomposition and therefore cannot be sampled. A field experiment was conducted in which C. megacephala were allowed to colonise naturally the corpses of rabbits that had died of malathion poisoning. The concentration of malathion increased gradually during the larval stages of C. megacephala reaching the maximum concentration in the third instar larvae. The concentration of malathion declined during prepupal stage and reached its lowest level among tenerals. The average malathion concentrations in C. megacephala growing in poisoned rabbit corpses left in a sunlit habitat were significantly higher (p<0.05) than those growing on poisoned rabbits left in a shaded habitat. The concentrations of malathion in the different stages of development of C. megacephala were moderately correlated (r = 0.51-0.69) with the administered doses as well as with those estimated in visceral organs. Thus, it would not be reliable to suggest the formulation of mathematical algorithms for relating the concentration of malathion found in the different stages of development of C. megacephala with those found in the visceral organs. However, in the context of forensic investigation, the qualitative detection of malathion in C. megacephala may prove useful in diagnosing the cause of death, since malathion is a common cause of accidental and suicidal deaths.

Matched MeSH terms: Cadaver
Fulltext Molecular identification of blow flies recovered from human cadavers during crime scene investigations in Malaysia

Kavitha R, Nazni WA, Tan TC, Lee HL, Isa MN, Azirun MS

Malays J Pathol, 2012 Dec;34(2):127-32.
PMID: 23424775 MyJurnal

Forensic entomology applies knowledge about insects associated with decedent in crime scene investigation. It is possible to calculate a minimum postmortem interval (PMI) by determining the age and species of the oldest blow fly larvae feeding on decedent. This study was conducted in Malaysia to identify maggot specimens collected during crime scene investigations. The usefulness of the molecular and morphological approach in species identifications was evaluated in 10 morphologically identified blow fly larvae sampled from 10 different crime scenes in Malaysia. The molecular identification method involved the sequencing of a total length of 2.2 kilo base pairs encompassing the 'barcode' fragments of the mitochondrial cytochrome oxidase I (COI), cytochrome oxidase II (COII) and t-RNA leucine genes. Phylogenetic analyses confirmed the presence of Chrysomya megacephala, Chrysomya rufifacies and Chrysomya nigripes. In addition, one unidentified blow fly species was found based on phylogenetic tree analysis.

Matched MeSH terms: Cadaver
Fulltext Morphology of Proximal Femur in South-West Coast of India

Kamath SU, Agarwal S, Austine J

Malays Orthop J, 2020 Nov;14(3):143-150.
PMID: 33403075 DOI: 10.5704/MOJ.2011.022

Introduction: With a higher proportion of young individuals undergoing uncemented hip arthroplasty, a close match in the dimension of the proximal femur and the implanted prosthesis is paramount. This is a study to gain insight into geographical variation in proximal femur morphology to determine the reference values to design uncemented femoral stems for a south Indian population, and also the effect of ageing and gender on the proximal femur morphology.
Materials and Methods: The study comprised of two groups. For the first group, 50 unpaired dry femur bones were obtained from adult human cadavers; and the second group was a clinical group of 50 adult patients. Standardised radiographic techniques were used to measure the extra-cortical and intra-cortical morphometric parameters. Based on these, dimensionless ratios were calculated to express the shape of the proximal femur. The data were expressed in terms of mean and standard deviation and a comparison made with other studies.
Results: A significant difference was noted across various population subsets within the Indian subcontinent and also in comparison to the Western population, suggestive of regional variation. The measurements made in cadaveric bone differed significantly from those in live patients, especially the femoral head diameter and extra-cortical and intra-cortical width. Femoral offset, head height and diameter were significantly less in females.
Conclusion: The south Indian population needs customised implants with an increase in neck shaft angle and a decrease in intra-cortical and extra-cortical width for press fit in hip arthroplasty. The variation between the two sexes must also be accounted for during prosthesis design.

Matched MeSH terms: Cadaver
Morphometric analysis and surgical adequacy of palmaris longus as a tendon graft. A systematic review of cadaveric studies

Yammine K, Erić M

Surg Radiol Anat, 2020 Mar;42(3):259-267.
PMID: 31741040 DOI: 10.1007/s00276-019-02381-x

INTRODUCTION: The tendon of the palmaris longus is commonly used as a tendon graft in many reconstructive surgeries. Easy to access and at proximity to the hand, the palmaris longus tendon is considered as the optimal tendon source for hand reconstructive surgery. However, and besides its inconsistency, the size of the palmaris longus tendon is reported to show variability. The aim of this study is to look for the surgical adequacy of the palmaris longus tendon by conducting a quantitative synthesis on its length and width in human populations and its correlation with the forearm length.
METHODS: Twenty-four studies met the inclusion criteria including 1761 cadaveric limbs.
RESULTS: The results were as following: (a) the mean palmaris longus tendon length was of 13.9 ± 2.6 cm, (b) the mean ratio palmaris longus tendon length/forearm length was of 0.545 ± 0.06, (c) the weighted correlation value was of 0.686, and (d) the mean palmaris longus tendon width was of 4.0 ± 1.7 mm. Only five studies reported a palmaris longus tendon length of more than 15 cm. The palmaris longus tendon length was shown to vary between ancestries; the Japanese had the shortest while Malaysian the longest palmaris longus tendons. All studies but one reported a palmaris longus tendon mean width of more than 3 mm where the minimal mean palmaris longus tendon width was of 2.5 mm.
CONCLUSION: While the requested length depends on the recipient site and/or type of reconstructive surgery, the palmaris longus tendon often met the required diameter for grafting. Our review demonstrated that while palmaris longus length varies between ancestries, its width is often adequate for grafting. In addition, the forearm length could be a good predictor of palmaris longus tendon length; such correlation could assist surgeons when planning to use palmaris longus tendon as a graft source.

Matched MeSH terms: Cadaver
Fulltext Morphometric analysis of patella and patellar ligament: a cadaveric study to aid patellar tendon grafts

Aithal Padur A, Kumar N, Lewis MG, Sekaran VC

Surg Radiol Anat, 2021 Dec;43(12):2039-2046.
PMID: 34570285 DOI: 10.1007/s00276-021-02837-z

PURPOSE: Morphometric analysis of the patella and the patellar ligament is crucial in diagnosing and surgical corrections of knee injuries and patellofemoral joint disorders. Dimensions of the patella and the patellar ligament are frequently used in implant design and ACL reconstruction. This study aims to obtain detailed morphometric data on the patellar ligament and its localization based on gross anatomical dissections in the adult cadavers.
METHODS: The present study consisted of 50 lower limbs from formalin-fixed male adult cadavers aged about 70 years (45-85) belonging to the South Indian population. Total length of the quadriceps tendon, patellar height, patellar ligament height, proximal width, distal width and thickness of the patellar ligament were measured meticulously. Mean, standard deviation, median scores of each parameter were computed for groups using SPSS 16.0. Level of significance was considered as p

Matched MeSH terms: Cadaver
Morphometrics of nuchal ligament in greyhound in different neck and body positions

Ismail SMY, Murray CM, Olusa TAO, Ismail MM, Hailat NQ, Yen HH, et al.

Anat Histol Embryol, 2022 Jan;51(1):143-152.
PMID: 34882828 DOI: 10.1111/ahe.12771

This study was conducted to describe the morphometrics of nuchal ligament and investigate the effects of different neck and body positions on the nuchal ligament in greyhounds. Nine adult greyhounds cadavers without any locomotion abnormalities were dissected through the neck musculature on the left side to expose the nuchal ligament. Three pins were placed to mark regions of interest on the nuchal ligament: at one cm cranial to the site of origin (the most dorsal point of the spinous process of the first thoracic vertebra), at the midpoint of the nuchal ligament and one cm caudal to the nuchal ligament site of insertion (close to the caudal aspect of the spinous process of the axis). Each cadaver was positioned on a masonite board and placed on a table on the floor in their lateral recumbency and seven different standardized body positions; P1-P7 were mimicked using goniometers and metal wires. Photographs were taken by positioning and fixing the camera above the nuchal ligament region. The length and widths (W1, W2 and W3) of nuchal ligament were measured using Image Pro software (Image-Pro Express version 5.0) on standardized photographs of each of seven different body and neck positions. The length of nuchal ligament in relation to the neutral position (P1) was less (- 7%, p > 0·05) in P6 (neck elevated) and increased in all other positions (+1%, p > 0·05 for P2, +19%, p 0·05 for P5, +40%, p

Matched MeSH terms: Cadaver
Multifaceted profile of an unusual paramedian occipital condyle-anatomical and computerised tomographic evaluation

Arora J, Mehta V, Abhishek K, Nisha S, Suri RK, Rath G, et al.

Clin Ter, 2014;165(2):111-4.
PMID: 24770815 DOI: 10.7471/CT.2014.1687

During extensive osteological study of 150 dry skulls in the Department of Anatomy, Vardhman Mahavir Medical college, an unusual Paramedian Occipital (POC) condyle was detected in the occipital bone of a cadaveric skull. The anatomical details of this unusual occipital condyle were carefully studied and its morphometric measurements taken. A coronal multiplanner reformatted image and a volume rendered image were taken to study radiological details and establish significant clinical correlation. Precise understanding of anatomy of craniovertebral junction and its anomalies have become immensely important for the present day surgeon during orthopaedic and neurosurgical procedures of this region . Technical advancements in imaging modalities such as CT and MRI scans further signify the importance of these anatomical variations ,which are often missed in routine examination. Osteological study combined with radiological details of the paramedian occipital condyle in the present case aims to emphasize the importance of bony anomalies in the craniovertebral region and their role in diagnosis and appropriate treatment of neurovascular compression syndromes of craniovertebral junction. The present study highlights anatomical details, clinical relevance and embryological basis of such a rare unusual paramedian occipital condyle.

Matched MeSH terms: Cadaver
Fulltext Multiple Loops of External and Internal Carotid Arteries Vulnerable in Surgical and Radiological Procedures

Nayak S, Kumar N

Balkan Med J, 2018 05 29;35(3):285-286.
PMID: 29843502 DOI: 10.4274/balkanmedj.2017.1179
Matched MeSH terms: Cadaver
Multiple arterial, neural and muscular variations in upper limb of a single cadaver

Vollala VR, Nagabhooshana S, Bhat SM, Potu BK, Rodrigues V, Pamidi N

Rom J Morphol Embryol, 2009;50(1):129-35.
PMID: 19221659

During routine dissection classes to undergraduate medical students, we have observed some important anatomic variations in the right upper limb of a 45-year-old cadaver. The anomalies were superficial ulnar artery, persistent median artery, variant superficial palmar arch, third head for biceps brachii, accessory head for flexor pollicis longus, variant insertion of pectoralis major, absence of musculocutaneous nerve, coracobrachialis muscle supplied by lateral root of median nerve and anomalous branching of median nerve in arm and forearm. Although there are individual reports about these variations, the combination of these variations in one cadaver has not previously been described in the literature consulted. Awareness of these variations is necessary to avoid complications during radiodiagnostic procedures or surgeries in the upper limb.

Matched MeSH terms: Cadaver
Fulltext Multiple renal arteries with an ascending upward renal Vein of the right kidney: a case report

Al-Shibli S.M.

International Medical Journal Malaysia, 2014;13(1):57-60.
MyJurnal

As it is known; the majority of the human subjects has two renal arteries arising from the abdominal aorta; each will supply one kidney but in 30% of individuals, certain variations can be found. Accessory renal arteries constitute the most common and clinically important of these variations. For our case report, we are presenting one of these different variations that can be found in the blood supply of the kidneys. During dissecting the abdomen of an approximately 65 years-old male cadaver, multiple variations were found. There were double right renal arteries with prehilar branching of the upper renal artery. We found also that the right renal vein ascended upwards obliquely before ending in the lateral aspect of the inferior vena cava. Variation in the renal vessels is relatively common, especially multiple renal arteries, and can go smoothly without any abnormalities with the function of the kidney, but in some situations like renal transplantations, vascular reconstructions, and various surgical and radiological diagnostic techniques, the study of the anatomy of these variations is of crucial importance to decrease the patient morbidity during surgical procedures.

Matched MeSH terms: Cadaver
Fulltext Multiple variations of the tendons of the anatomical snuffbox

Thwin SS, Fazlin F, Than M

Singapore Med J, 2014 Jan;55(1):37-40.
PMID: 24452976

Multiple tendons of the abductor pollicis longus (APL) in the anatomical snuffbox of the wrist can lead to the development of de Quervain's syndrome, which is caused by stenosing tenosynovitis. A cadaveric study was performed to establish the variations present in the tendons of the anatomical snuffbox in a Malaysian population, in the hope that this knowledge would aid clinical investigation and surgical treatment of de Quervain's tenosynovitis.

Matched MeSH terms: Cadaver
Fulltext Myospila pudica pudica (Stein, 1915) (Diptera: Muscidae) in peninsular Malaysia and its occurrence on a monkey carrion

Zuha RM, Kurahashi H, Chin HC, Osman K, Rashid RA, Hassan RA, et al.

Trop Biomed, 2009 Aug;26(2):216-8.
PMID: 19901908

Myospila pudica pudica (Stein, 1915) (Diptera: Muscidae) was recorded for the first time in Malaysia during a forensic entomological study conducted at a forested area of Forensic Science Simulation Site, Faculty of Allied Health Sciences Universiti Kebangsaan Malaysia, Bangi, Selangor. This species can be differentiated from other species of its genus by having R1 setulose on dorsal surface and R4+5 more or less setulose dorsally and ventrally. The legs, including tarsi, are testaceous yellow and palpi blackish. Lateral and ventral surface of scutellum bare below the level of bristles and the third antennal segment is brownish yellow. Other features including the diverging of inner margin of lower squama from scutellum margin. This is also the first report on the occurence of M. pudica pudica (Stein, 1915) on animal carcass.

Matched MeSH terms: Cadaver
Fulltext Nerve compression due to an abnormal muscle

Myint K

Med J Malaysia, 1981 Dec;36(4):227-9.
PMID: 7334958
Matched MeSH terms: Cadaver
Fulltext Neural Differentiation of Human Pluripotent Stem Cells for Nontherapeutic Applications: Toxicology, Pharmacology, and In Vitro Disease Modeling

Yap MS, Nathan KR, Yeo Y, Lim LW, Poh CL, Richards M, et al.

Stem Cells Int, 2015;2015:105172.
PMID: 26089911 DOI: 10.1155/2015/105172

Human pluripotent stem cells (hPSCs) derived from either blastocyst stage embryos (hESCs) or reprogrammed somatic cells (iPSCs) can provide an abundant source of human neuronal lineages that were previously sourced from human cadavers, abortuses, and discarded surgical waste. In addition to the well-known potential therapeutic application of these cells in regenerative medicine, these are also various promising nontherapeutic applications in toxicological and pharmacological screening of neuroactive compounds, as well as for in vitro modeling of neurodegenerative and neurodevelopmental disorders. Compared to alternative research models based on laboratory animals and immortalized cancer-derived human neural cell lines, neuronal cells differentiated from hPSCs possess the advantages of species specificity together with genetic and physiological normality, which could more closely recapitulate in vivo conditions within the human central nervous system. This review critically examines the various potential nontherapeutic applications of hPSC-derived neuronal lineages and gives a brief overview of differentiation protocols utilized to generate these cells from hESCs and iPSCs.

Matched MeSH terms: Cadaver
Fulltext Novel method to estimate the length of the palmaris longus tendon

Manohar, A., Ramal, L.

Malaysian Journal of Medicine and Health Sciences, 2013;9(2):19-24.
MyJurnal

Palmaris longus is tendon of choice in reconstructive, plastic and cosmetic surgeries. Thus, a suitable length is required and it would be more convenient if the length of the tendon of the palmaris longus could be estimated before harvesting. This study was carried out to determine the relationship between the length and width of the palmaris longus tendon and the length of forearm and hand, the relationship between the length and the width of the palmaris longus tendon and wrist width and wrist circumference, as well as to identify a technique to estimate the length of the tendinous part of palmaris longus before harvesting it. A standardized proforma was used to collect the data of each of the 31 cadavers upper limbs. These data were analysed using SPSS software version 17. It is important to note that p value less than 0.05 is considered as statistically significant in this study. Out of the 31 upper limbs, palmaris longus tendon was absent in 3 (9.68%). Meanwhile, the mean length and width of the palmaris longus tendon was found to be 16.20 cm and 0.48 cm, respectively. The mean length of the forearm and hand was 26.6 cm and 21.2 cm, respectively. The mean width of the wrist and wrist circumference was 8.2 cm and 14.82 cm, respectively. These indicate a significant and moderate relationship between the length of palmaris longus tendon and the length of forearm (r = 0.49, r2 = 0.24, p < 0.01). In addition, there was also a significant relationship between the length of palmaris longus tendon and the length of hand (r = 0.56, p < 0.01). This paper presents the technique used to estimate the length and width of the tendinous part of palmaris longus before harvesting. The length of palmaris longus can be estimated pre-operatively by measuring the length of the hand by using the technique explained in this paper.

Matched MeSH terms: Cadaver
Opportunistic insects associated with pig carrions in Malaysia

Heo CC, Kurahashi H, Mohamed Abdullah Marwi, Jeffery J, Baharudin Omar

Sains Malaysiana, 2011;40:1179-1186.

Flies from the family Calliphoridae, Sarcophagidae and Muscidae are usually found on human cadavers or animal carcasses. However, there are many other families of Diptera and Coleoptera that were found associated with animal carcasses, which have not been reported in Malaysia. In this paper, we report dipterans from the family Micropezidae: Mimegralla albimana Doleschall, 1856, Neriidae: Telostylinus lineolatus (Wiedemann 1830); Sepsidae: Allosepsis indica (Wiedemann 1824), Ulidiidae: Physiphora sp. and a beetle (Coleoptera: Hydrophilidae: Sphaeridium sp.) as opportunist species feeding on oozing fluid during the decomposition process. They did not oviposit on the pig carcasses, therefore, their role in estimation of time of death is of little importance. However, they could provide clues such as locality and types of habitats of the crime scene.

Matched MeSH terms: Cadaver
Organ transplantation in Malaysia: a social-legal study

Ngah AC

Taiwan Yi Xue Ren Wen Xue Kan, 2005 Sep;6(1-2):39-48.
PMID: 16538765

Kidney and corneal transplants have been undertaken since the seventies although other forms of organ transplantation were lesser known. To date more than 1000 kidney transplants, the majority from living related donors have been performed. Nevertheless heart, lung and liver transplant only had an impact in the nineties. The main reason being, the lack of cadaveric donors, which has hampered the development of organ transplantation in Malaysia. It is instructive to note that the Malaysian society has been rather conservative when it comes to organ transplantation. This is compounded by the Asean culture and value system, which are directly derived from our historical background and religious convictions. However attempts had been made by various organisations such as The Malaysian Society of Transplantation, which was set up in 1994 to create greater awareness on organ donation & transplantation amongst both the healthcare professionals and the public.

Matched MeSH terms: Cadaver
Outcome of overseas kidney transplantation in Malaysia

Morad Z, Lim TO

Transplant Proc, 2000 Nov;32(7):1485-6.
PMID: 11119799
Matched MeSH terms: Cadaver
Fulltext Partial duplication of tentorium cerebelli and complete duplication of falx cerebelli

Nayak SB, Shetty SD

Anat Cell Biol, 2019 Sep;52(3):337-339.
PMID: 31598364 DOI: 10.5115/acb.19.017

Variations of the dural folds and the dural venous sinuses are infrequently reported in the existing medical literature. Such variations in the posterior cranial fossa may pose difficulties in various analytical and surgical procedures of this region. We present a rare concurrent variation of the falx cerebelli and tentorium cerebelli that was detected during routine dissection of an adult male cadaver. While removing the brain, a partial duplication of tentorium cerebelli was observed below the left half of the tentorium cerebelli and above the left cerebellar hemisphere. This fold did not have any dural venous sinus in it. Further, a complete duplication of falx cerebelli with a single occipital venous sinus within its attached border was also observed. We present the review of literature and discuss the comparative anatomy of this case.

Matched MeSH terms: Cadaver
Patterns of oviposition and development of Chrysomya megacephala (Fabricius) (Diptera: Calliphoridae) and Chrysomya rufifacies (Macquart) (Diptera: Calliphoridae) on burned rabbit carcasses

Mahat NA, Zainol-Abidin NL, Nordin NH, Abdul-Wahab R, Jayaprakash PT

Forensic Sci Int, 2016 Mar;260:9-13.
PMID: 26779962 DOI: 10.1016/j.forsciint.2015.12.047

Considering that crimes against animals such as illegal killing and cruelty have been alarmingly increasing and since burning is one of the common ways for disposing cadavers, ability to estimate minimum postmortem interval (PMI) using entomological data merits consideration. Chrysomya megacephala and Chrysomya rufifacies are common necrophagous species recovered from cadavers in many countries including Malaysia. Specific studies focusing on the oviposition and developmental patterns of both species on cadavers manifesting different levels of burn as described by the Crow-Glassman Scale (CGS) remain scarce. In four replicates, rabbit carcasses were burned to CGS levels #1, #2 and #3 by varying the amount of petrol used and duration of burning. Oviposition by C. megacephala and C. rufifacies was delayed by one day in the case of carcasses burned to the CGS level #3 (p<0.05) when compared with that of controls. Such delay in oviposition was not observed in the CGS level #1 and #2 carcasses. No significant differences (p>0.05) in the duration of development were found between control and burned carcasses. These findings deserve consideration while estimating minimum PMI since burning as a mean for disposing animal and human cadavers is gaining popularity.

Matched MeSH terms: Cadaver

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links